#Automotive Electric Vacuum Pump Market | Explore Tumblr Posts and Blogs

market-insider · 9 months

Text

Zero Friction Coatings Market: Charting the Course for Enhanced Performance and Sustainable Solutions

The global zero friction coatings market size is estimated to reach USD 1,346.00 million by 2030 according to a new report by Grand View Research, Inc. The market is expected to expand at a CAGR of 5.6% from 2022 to 2030. Growth can be attributed to the fact that these coatings reduce friction and wear resulting in low fuel consumption and less heat generation. According to the European Automobile Manufacturers' Association, 79.1 million motor vehicles were produced across the globe in 2021 which was up by 1.3% as compared to 2020. Zero friction coatings can extend the time between component maintenance and replacement, especially for machine parts that are expensive to manufacture.

Zero Friction Coatings Market Report Highlights

In 2021, molybdenum disulfide emerged as the dominant type segment by contributing around 50% of the revenue share. This is attributed to its properties such as low coefficient of friction at high loads, electrical insulation, and wide temperature range

The automobile & transportation was the dominating end-use segment accounting for a revenue share of more than 35% in 2021 due to the rapid growth of the automotive industry across the globe

The energy end-use segment is anticipated to grow at a CAGR of 5.7% in terms of revenue by 2030, owing to the excessive wear on the drill stem assembly and the well casing during the drilling operations in the oil and gas sector

In Asia Pacific, the market is projected to witness the highest CAGR of 5.8% over the predicted years owing to the presence of car manufacturing industries in the countries such as Japan, South Korea, and China

For More Details or Sample Copy please visit link @: Zero Friction Coatings Market Report

Several applications in the automobile industry use wear-resistant plastic seals that require zero tolerance for failure and lifetime service confidence. Increasing demand for the product from the automotive industry across the globe for various applications including fuel pumps, automatic transmissions, oil pumps, braking systems, and others is expected to drive its demand over the forecast period.

Low friction coatings can be used in extreme environments comprising high pressure, temperatures, and vacuums. These coatings can provide improved service life and performance thereby eliminating the need for wet lubricants in environments that require chemicals, heat, or clean room conditions. The product containing molybdenum disulfide (MoS2) are suitable for reinforced plastics while those free from MoS2 are suitable for non-reinforced plastics.

Zero friction coatings are paint-like products containing submicron-sized particles of solid lubricants dispersed through resin blends and solvents. The product can be applied using conventional painting techniques such as dipping, spraying, or brushing. The thickness of the film has a considerable influence on the anti-corrosion properties, coefficient of friction, and service life of the product. Its thickness should be greater than the surface roughness of the mating surfaces.

ZeroFrictionCoatingsMarket #FrictionlessTechnology #CoatingInnovations #IndustrialEfficiency #ZeroFrictionSolutions #AdvancedMaterials #SurfaceCoatings #ManufacturingAdvancements #GlobalIndustryTrends #InnovativeCoatings #PerformanceOptimization #MechanicalSystems #SustainableTechnology #IndustrialApplications #FutureTech #InnovationInMaterials #EfficiencySolutions #ZeroFrictionMarket #TechnologyInnovation #EngineeringMaterials

2 notes · View notes

123234545565567 · 17 days

Text

0 notes

spookysaladchaos · 2 months

Text

Global Top 14 Companies Accounted for 94% of total Semiconductor Dry Vacuum Pump market (QYResearch, 2021)

A vacuum pump is a device used to generate, improve and maintain a vacuum environment according to a certain working principle. It is an indispensable product that directly affects the performance and quality of vacuum complete equipment. Dry vacuum pumps are non-contact vacuum pumps that do not use oil or seals.

In order to control the manufacturing process to smaller dimensions, it is increasingly necessary to perform more semiconductor manufacturing process steps with greater precision and uniformity. To achieve this, semiconductor processes must operate in an extremely controlled vacuum environment. At present, vacuum pumps have been widely used in many process links of semiconductor manufacturing, including etching, coating, diffusion and so on.

According to the new market research report “Global Semiconductor Dry Vacuum Pump Market Report 2023-2029”, published by QYResearch, the global Semiconductor Dry Vacuum Pump market size is projected to reach USD 2.24 billion by 2029, at a CAGR of 8.9% during the forecast period.

Figure. Global Semiconductor Dry Vacuum Pump Market Size (US$ Million), 2018-2029

Figure. Global Semiconductor Dry Vacuum Pump Top 14 Players Ranking and Market Share (Ranking is based on the revenue of 2022, continually updated)

The global key manufacturers of Semiconductor Dry Vacuum Pump include Atlas Copco (Edwards Vacuum), Ebara Corporation, Pfeiffer Vacuum GmbH, LOTVACUUM, Kashiyama Industries, Hanbell Precise Machinery, Busch Vacuum, SKY Technology Development, ULVAC, Inc, Osaka Vacuum, Ltd, etc. In 2022, the global top five players had a share approximately 94.0% in terms of revenue.

About QYResearch

QYResearch founded in California, USA in 2007.It is a leading global market research and consulting company. With over 16 years’ experience and professional research team in various cities over the world QY Research focuses on management consulting, database and seminar services, IPO consulting, industry chain research and customized research to help our clients in providing non-linear revenue model and make them successful. We are globally recognized for our expansive portfolio of services, good corporate citizenship, and our strong commitment to sustainability. Up to now, we have cooperated with more than 60,000 clients across five continents. Let’s work closely with you and build a bold and better future.

QYResearch is a world-renowned large-scale consulting company. The industry covers various high-tech industry chain market segments, spanning the semiconductor industry chain (semiconductor equipment and parts, semiconductor materials, ICs, Foundry, packaging and testing, discrete devices, sensors, optoelectronic devices), photovoltaic industry chain (equipment, cells, modules, auxiliary material brackets, inverters, power station terminals), new energy automobile industry chain (batteries and materials, auto parts, batteries, motors, electronic control, automotive semiconductors, etc.), communication industry chain (communication system equipment, terminal equipment, electronic components, RF front-end, optical modules, 4G/5G/6G, broadband, IoT, digital economy, AI), advanced materials industry Chain (metal materials, polymer materials, ceramic materials, nano materials, etc.), machinery manufacturing industry chain (CNC machine tools, construction machinery, electrical machinery, 3C automation, industrial robots, lasers, industrial control, drones), food, beverages and pharmaceuticals, medical equipment, agriculture, etc.

#Semiconductor Dry Vacuum Pump

0 notes

businessindustry · 2 months

Text

Vacuum Sucker Market Size, Trends, Growth and Forecast to 2032

The Reports and Insights, a leading market research company, has recently releases report titled “Vacuum Sucker Market: Global Industry Trends, Share, Size, Growth, Opportunity and Forecast 2024-2032.” The study provides a detailed analysis of the industry, including the global Vacuum Sucker Market share, size, trends, and growth forecasts. The report also includes competitor and regional analysis and highlights the latest advancements in the market.

Report Highlights:

How big is the Vacuum Sucker?

The global vacuum sucker market size reached US$ 730.8 million in 2023. Looking forward, Reports and Insights expects the market to reach US$ 1,245.2 million in 2032, exhibiting a growth rate (CAGR) of 6.1% during 2024-2032.

What are Vacuum Sucker Market?

A vacuum sucker, or vacuum suction cup, is a device designed to lift and handle objects using vacuum pressure. It typically features a flexible cup made from materials like rubber or silicone, which is connected to a vacuum pump. When air is removed from the cup, a vacuum is formed, causing the cup to adhere securely to the surface of the object. This technology enables the efficient handling, lifting, and movement of items without manual gripping or complex machinery, making it useful in various fields such as manufacturing, packaging, and robotics.

Request for a sample copy with detail analysis: https://www.reportsandinsights.com/sample-request/1901

What are the growth prospects and trends in the Vacuum Sucker Market industry?

The vacuum sucker market growth is driven by various factors and trends. The vacuum sucker market is experiencing notable growth, driven by the increasing adoption of automation in industries such as manufacturing, logistics, packaging, and robotics. These devices are crucial for the efficient and safe handling of materials, reducing manual labor and boosting productivity. Innovations in suction technology, along with advancements in materials and design, are broadening their application across various sectors. The demand is also rising due to the need for precision and reliability in automated systems, as well as a focus on workplace safety and ergonomic solutions. With the continued shift towards automation, the vacuum sucker market is set for ongoing expansion. Hence, all these factors contribute to vacuum sucker market growth.

What is included in market segmentation?

The report has segmented the market into the following categories:

By Type:

Electric Vacuum Suckers

Pneumatic Vacuum Suckers

Hybrid Vacuum Suckers

By End-Use Industry:

Automotive

Electronics

Food & Beverage

Packaging

Pharmaceutical

Logistics & Warehousing

Others

By Application:

Material Handling

Assembly & Robotics

Pick & Place

Packaging & Palletizing

Inspection & Testing

Others

By Sales Channel:

Direct Sales

Distributors/Wholesalers

E-commerce

Global Market Segmentation by Region:

North America:

United States

Canada

Europe:

Germany

United Kingdom

France

Italy

Spain

Russia

Poland

BENELUX

NORDIC

Rest of Europ

Asia Pacific:

China

Japan

India

South Korea

ASEAN

Australia & New Zealand

Rest of Asia Pacific

Latin America:

Brazil

Mexico

Argentina

Rest of Latin America

Middle East & Africa:

Saudi Arabia

South Africa

United Arab Emirates

Israel

Rest of MEA

Who are the key players operating in the industry?

The report covers the major market players including:

Piab AB

Schmalz Inc.

Festo AG & Co. KG

SMC Corporation

Aventics GmbH

VACUUBRAND GMBH + CO KG

Vaccon Company, Inc.

SMC Corporation of America

Pneumadyne, Inc.

Schmalz GmbH

Vuototecnica S.p.A.

DESTACO, a Dover Company

ANVER Corporation

AERO-LIFT Vakuumtechnik GmbH

VMECA Co., Ltd.

Discover more: https://www.reportsandinsights.com/report/Vacuum Sucker-market

If you require any specific information that is not covered currently within the scope of the report, we will provide the same as a part of the customization.

About Us:

Reports and Insights consistently mееt international benchmarks in the market research industry and maintain a kееn focus on providing only the highest quality of reports and analysis outlooks across markets, industries, domains, sectors, and verticals. We have bееn catering to varying market nееds and do not compromise on quality and research efforts in our objective to deliver only the very best to our clients globally.

Our offerings include comprehensive market intelligence in the form of research reports, production cost reports, feasibility studies, and consulting services. Our team, which includes experienced researchers and analysts from various industries, is dedicated to providing high-quality data and insights to our clientele, ranging from small and medium businesses to Fortune 1000 corporations.

Reports and Insights Business Research Pvt. Ltd. 1820 Avenue M, Brooklyn, NY, 11230, United States Contact No: +1-(347)-748-1518 Email: [email protected] Website: https://www.reportsandinsights.com/ Follow us on LinkedIn: https://www.linkedin.com/company/report-and-insights/ Follow us on twitter: https://twitter.com/ReportsandInsi1

#Vacuum Sucker Market Size #Vacuum Sucker Market Share #Vacuum Sucker Market Demand #Vacuum Sucker Market Analysis

0 notes

trendingreportz · 2 months

Text

Powder Coatings Market - Forecast(2024 - 2030)

Powder Coatings Market Overview

The Powder Coatings Market size is forecasted to reach US$18.2 billion by 2027 after growing at a CAGR of 6.1% during the forecast period 2022-2027. Powder coating is a dry finishing process in which free-flowing, thermoplastic or thermoset powder material is applied to a surface, melted and then allowed to dry and harden into a protective coating. Powder coating based on thermoplastic polymers is derived from polyolefins, polyvinyl chloride, polyvinyl fluoride, polyester and so on whereas thermoset-based powder coatings are derived from epoxy, polyester, acrylic, polyurethanes and so on. Powder coating imparts a high-quality, durable finish, that allows for improved efficiency and is eco-friendly. Powder coatings are based on polymer resin systems. The environmental advantages offered by powder coatings compared to liquid coating methods drives the powder coatings market. The pandemic resulted in shortages of raw materials and supply chain disruptions. According to Echemi, a chemical industry B2B website, there were shortages of neopentyl glycol that is used in many of the resins for powder coatings and triglycidyl isocyanurate which is a curing agent used in polyester powder coatings. This resulted in price hikes of over 60% in the Powder Coatings industry.

Powder Coatings Market Report Coverage

The “Powder Coatings Market Report – Forecast (2022-2027)” by IndustryARC, covers an in-depth analysis of the following segments of the Powder Coatings industry.

By Resin Type: Thermoset (Epoxy, Polyester, Acrylic, Fluoropolymer, Polyurethanes and Others) and Thermoplastic (Polyamide, Polyolefin, Polyethylene, Polyvinyl Chloride, Polypropylene and Others).

By Coating Method: Fluidized Spray, Electrostatic Fluidized Bed, Electrostatic Spray and Others.

By Substrate: Metal (Steel, Aluminum and Others) and Non-Metal (Plastic, Wood, Ceramics, Glass and Others).

By End-Use Industry: Automotive [Two-wheelers (Scooters and Bikes) and Three/Four-wheelers (Passenger Cars, Heavy Commercial Vehicles and Light Commercial Vehicles)], Construction (Outdoor Construction and Indoor Construction), Appliances (Refrigerator, Water Coolers, Vending Machines, Washing Machines, Air Conditioners/Coolers, Electrical Fans, Kitchen Blenders/Mixers, Vacuum Cleaners, Water Heaters, Ovens & Chimneys, LPG Cylinders and Others), Electrical & Electronics (Transformers, Generators, ATM Machines, Industrial/Commercial Systems, Electrical Motor Stators/Rotors, Electric Meters & Connectors, Computer Room Floor System and Others), General Industrial (Industrial Carts & Power Tools, Storage & Racking, Escalators & Elevators, Lockers, Walls & Fittings, Water Pumps, Steel Drums, Pipes & Rebars and Others), Furniture (Outdoor Metal Furniture, Beds & Chairs, Benches and Others), Medical, Transportation & Equipment (Railways, Industrial Transportation, Construction Equipment, Agricultural Equipment, Marine, Aerospace) and Others.

By Geography: North America (the USA, Canada and Mexico), Europe (UK, Germany, France, Italy, Netherlands, Spain, Denmark, Belgium and the Rest of Europe), Asia-Pacific (China, Japan, India, South Korea, Australia and New Zealand, Indonesia, Taiwan, Malaysia and Rest of APAC), South America (Brazil, Argentina, Colombia, Chile and Rest of South America), Rest of the World (the Middle East and Africa)

Request Sample

Key Takeaways

The Asia-Pacific region dominates the powder coatings market on account of the increasing construction activities and the recovering automotive industry. According to Invest India, the construction industry in India is expected to reach $1.4 trillion by 2025.

There are two types of powder coatings, thermoplastic and thermoset. Thermoplastic powders are commonly derived from polyolefins, polyvinyl chloride and polyvinyl fluoride while thermosetting powders are derived from acrylic, epoxy and polyester resins.

Thermoplastic powder coating melts and flows when heat is applied but continues to have the same chemical composition once it cools and solidifies. On the other hand, thermoset powder coatings will not melt when heated after curing.

The major opportunity for this market is developing thin-film coatings.

A detailed analysis of strengths, weaknesses, opportunities and threats will be provided in the powder coatings market report.

Powder Coatings Market Segment Analysis – by Resin Type

The thermoset segment held a dominant Powder Coatings Market share in 2021 and is expected to grow at a CAGR of 7.2% during the forecast period of 2022-2027. In the powder coating process, as the powder heats and melts it flows around the surface of the object and undergoes a chemical change called cross-linking which forms a hard and durable coating. Thermosetting coatings do not re-melt when they are cooled after heat is re-applied. In its powdered state, thermoset material tends to have a much lower molecular weight than other coating materials, usually requiring less heat to melt, making it more energy efficient. Thermoset powders are commonly derived from epoxy, acrylic, polyester and polyurethane groups. The most frequently employed are epoxy and polyester-based resins. Epoxy resin-based thermoset powders form a tough impact-resistant coating that has excellent corrosion resistance, so they are used for internal applications. Polyester-based coatings have the added advantage of being highly UV resistant, making them an ideal choice for outdoor applications. Thus, the thermoset segment is anticipated to dominate the powder coatings market.

Inquiry Before Buying

Powder Coatings Market Segment Analysis – by Application

The construction segment held a dominant Powder Coatings Market share in 2021 and is expected to grow at a CAGR of 8.3% during the forecast period of 2022-2027. Powder coating can be used for metal components such as door frames, railings, window frames, fencing, shelters, storefronts, façade or other areas of buildings. According to WSP, around 25% of the overall construction cost is the façade, with the metal contributing a major part of the cost. Powder coating can prevent corrosion and minimize re-coating as it imparts a long-lasting coating. The powder coat is more resistant to scratching, fading, erosion or other types of damage that can ruin the aesthetic appeal of a building The latest trend in the construction industry is low-emitting products and sustainable buildings. According to the U.S. Green Building Council (USGBC), 1,105 projects have been certified with LEED certification for green buildings in the U.S. in 2021. Powder coatings are solvent and VOC-free and produce less waste than other coating methods, making them a clear choice for green buildings. Thus, the construction industry is expected to dominate the market.

Powder Coatings Market Segment Analysis – by Geography

The Asia-Pacific region held the dominant Powder Coatings Market share up to 60% in 2021 owing to the rising consumption of powder coatings from the automotive, construction and appliances sector. The construction activities in the region rebounded after the initial lockdown in 2020. The government of India has made several investments in construction and infrastructure to aid in development. As per a report by the Indian Construction Equipment Manufacturers Association (ICEMA), the construction equipment industry recorded a 47% growth in the second quarter of FY2021-22. According to a news report in Reuters, in FY22-23, US$529.7 billion will be invested to further drive economic growth across the country. China’s construction sector is expanding rapidly. according to the National Bureau of Statistics, China’s construction output is estimated to be worth approximately US$4.3 trillion in 2021. China plans to invest US$1.43 trillion in key construction projects as part of its 14th five-year plan. As per the National Development and Reform Commission (NDRC), the Shanghai plans call for a total investment of US$38.7 billion over the next three years. The Japanese construction industry is expected to boom as the World Expo will be hosted in Osaka, Japan in 2025. Therefore, this region is set to dominate the Powder Coatings market.

Schedule a Call

Powder Coatings Market Drivers

Environmental Advantages of Using Powder Coatings

Powder coating is the green process of choice for finishing operations. It produces less waste than other finishing processes such as liquid coating. The use of powder coating aids in eliminating waste because, after application, the powder coating overspray can be reclaimed and reused. These types of reclamation practices keep overhead costs low while minimizing environmental impacts. Solvents contain volatile organic compounds (VOCs) which are detrimental to the environment. In liquid coatings, the average VOC content is between 3.5 to 5.5 pounds per gallon, which is approximately one-third to one-half of each gallon of the liquid coating being emitted into the environment during the application process. Since powder coating lines do not require the use of solvents, they do not emit VOCs and can operate with reduced energy, faster curing and lower temperatures. This makes powder coatings highly attractive from an environmental perspective. Innovations in the powder coatings industry strive to make it even better. For instance, in early 2020, Sherwin-Williams General Industrial Coatings division launched the Powdura ECO line made from a resin that uses pre-consumer recycled polyethylene terephthalate (rPET). Thus, the environmental advantages offered by using powder coatings drive the market.

Growing Usage of Powder Coatings in Electric Vehicles

The growth of electric vehicles (EVs) can be attributed to increasing oil prices and growing awareness regarding climate change. According to the International Energy Agency (IEA), in 2021, sales of electric cars (including fully electric and plug-in hybrids) doubled to a new record of 6.6 million. Sales kept rising in 2022 as well, with 2 million electric cars sold worldwide in Q1 2022, up almost 75% compared to Q1 2021. To keep EV motors and batteries operating efficiently, it’s important to maintain an optimum temperature range. Sometimes EV motors can generate operating temperatures that may exceed 200°C. Powder coatings are used to insulate battery boxes and isolate thermal activity. To take advantage of the growing EV market, powder coating manufacturers are launching products that cater to EVs. For instance, in January 2022, Arkema announced high-voltage coating solutions for electric vehicles. The two new polyamide 11 powder coating grades with UL certification were introduced for use in electric vehicle battery systems and other applications. Thus, the growing usage of powder coatings for EVs drives the market.

Powder Coatings Market Challenge

High Initial Investment

The major restraint in the Powder Coatings market is the high initial investment required to set up the powder coating equipment. Liquid coating applications only require a spray gun and a spray area. Comparatively, a powder coating workshop needs a spray gun, spray booth and curing oven. The addition of the curing oven adds significantly to the initial start-up costs for powder coating. The size of the curing oven purchased needs to take into account the maximum part size that can effectively be handled. Larger, thicker and heavier parts require a larger and more powerful oven, which further adds to the overall equipment costs. While metals can be powder coated using electrostatic spray deposition, non-metals require a fluidized bed powder coating application. The need for a fluidized bed also increases the overall equipment costs for the establishment of a complete powder coating facility. This can prove to be a challenge for the powder coatings market.

Buy Now

Powder Coatings Industry Outlook

Product launches, acquisitions and R&D activities are key strategies adopted by players in the Powder Coatings market. The top 10 companies in the Powder Coatings Market are:

PPG Industries

AkzoNobel Powder Coatings

BASF SE

Axalta Coating Systems

The Sherwin Williams Company

Jotun

Valspar Corporation

Nippon Paint Holdings Co. Ltd.

Kansai Nerolac Paints Limited

Tiger Coatings

Recent Developments

In June 2022, Polychem launched a new powder coating collection called the Effects Collection. The collection features powder special effects, such as speckles, translucents, metallics, sparkle translucent, veins, patina effects, river textures, fine textures and dramatic illusion colors, available in a variety of colors.

In May 2022, AkzoNobel Powder Coatings launched a comprehensive range of ready-to-ship powder coatings ranges specifically for the North American market. The range comprises approximately 500 unique powder coatings, with a broad variety of premium quality colors, textures and finishes.

In February 2022, PPG announced that it has entered into an agreement to acquire the powder coatings business of Arsonsisi, an industrial coatings company based in Milan, Italy. The acquisition will enable PPG to expand its powder coatings offering in the Europe, Middle East and Africa (EMEA) region.

#Powder Coatings Market #Powder Coatings Market Share #Powder Coatings Market Size #Powder Coatings Market Forecast #Powder Coatings Market Report #Powder Coatings Market Growth

0 notes

boatarenttahoe · 3 months

Text

Fruit Puree Market Developments, Trends & Opportunities till 2032

Fruit Puree Market provides in-depth analysis of the market state of Fruit Puree manufacturers, including best facts and figures, overview, definition, SWOT analysis, expert opinions, and the most current global developments. The research also calculates market size, price, revenue, cost structure, gross margin, sales, and market share, as well as forecasts and growth rates. The report assists in determining the revenue earned by the selling of this report and technology across different application areas.

Geographically, this report is segmented into several key regions, with sales, revenue, market share and growth Rate of Fruit Puree in these regions till the forecast period

North America

Middle East and Africa

Asia-Pacific

South America

Europe

Key Attentions of Fruit Puree Market Report:

The report offers a comprehensive and broad perspective on the global Fruit Puree Market.

The market statistics represented in different Fruit Puree segments offers complete industry picture.

Market growth drivers, challenges affecting the development of Fruit Puree are analyzed in detail.

The report will help in the analysis of major competitive market scenario, market dynamics of Fruit Puree.

Major stakeholders, key companies Fruit Puree, investment feasibility and new market entrants study is offered.

Development scope of Fruit Puree in each market segment is covered in this report. The macro and micro-economic factors affecting the Fruit Puree Market

Advancement is elaborated in this report. The upstream and downstream components of Fruit Puree and a comprehensive value chain are explained.

Browse More Details On This Report at @https://www.globalgrowthinsights.com/market-reports/fruit-puree-market-101464

Global Growth Insights

Web: https://www.globalgrowthinsights.com

Our Other Reports:

Fruit Puree Market Forecast

Global Smart Doorbell Camera Market Share

Passenger Boarding Bridge Market Growth Rate

Live Streaming Video Platform Market Size

Data Center Backup and Recovery Solutions Market Share

Vacuum Insulation Panels Market Analysis

Lateral Flow Immunoassay Based Rapid Tests Market

Automotive Battery Testing Market Growth

Global Point-Of-Use Water Treatment Systems Market Growth

Global Industrial Wastewater Treatment Plant Market Size

Global In-Memory Computing Market Share

LNG As A Bunker Fuel Market Forecast

Portable Solar Charger Market Size

Ketamine Treatment Market Growth Rate

Quartz Monitor Crystals Market Analysis

Electric Heater Market Share

Structural Heart Devices Market Growth

Fluid Viscous Dampers (FVD) Market

Global MEMS Microphone Market Size

Global Thyristor Market Growth

Food Robotics Market Forecast

Global Medical Billing Outsourcing Market Share

Voice Communication Equipment Market Growth Rate

Demand Side Platforms (DSP) for Programmatic Advertising from the Mobile Side Market Size

Transcatheter Heart Valves Market Share

Baseball Cap Market Analysis

Anc Headset Market

6-amino-nicotinic Acid Methyl Ester (Cas#36052-24-1) Market Growth

Global Digital Logistics Market Growth

Global Architectural Acoustic Panels Market Size

Global Down Jacket Market Share

Work Stress Management Market Forecast

Energy Management V2H (Vehicle-To-Home) Power Supply Systems Market Size

Carbonyl Iron Powder and Ultra Fine Iron Powder Market Growth Rate

Music Streaming Subscription Service Market Analysis

Healthcare-associated Infectious Disease Diagnostics Market Share

Bone Conduction Headphones Market Growth

Seawater Desalination Pump Market

Global Basketball Equipment Market Size

Global Human Microbiome Therapeutics Market Growth

#Fruit Puree Market Size #Fruit Puree Market Share #Fruit Puree Market Trends #Fruit Puree Market Industry #Fruit Puree Market Growth

0 notes

custommarketinsightsreports · 6 months

Text

0 notes

nikjmiles · 7 months

Video

vimeo

The road to Electric will be shaped by more than the vehicles themselves. from Our Auto Expert on Vimeo.

In an era where the captivating roar of combustion engines is gradually giving way to the serene hum of electric motors, we stand on the precipice of a monumental shift in the automotive domain. A revolution is underway, silently accelerating as the allure of electric vehicles (EVs) captures the imagination of consumers worldwide. A recent Auto Pacific study sheds light on this seismic shift, revealing a surge in consumer interest that could very well dictate the trajectory of the automotive industry.

The pulse of the market is quickening, with data indicating a leap in purchase intentions for EVs from 11% in 2022 to an impressive 17% in 2023. This uptick is not merely a statistic; it’s a testament to a growing enthusiasm among drivers to embark on electric voyages, with a staggering 58% of survey respondents expressing openness to considering an EV for their next vehicle purchase. This burgeoning interest heralds a new era of mobility, one that is cleaner, quieter, and more sustainable.

But the journey toward electric mobility is not powered by cars alone; it’s the infrastructure that will fuel this revolution. Future EV owners are not just looking for a new set of wheels; they’re envisioning a redefined charging experience. The AutoPacific EV Consumer Insights Study, which canvassed the opinions of over 7,200 potential EV buyers, unveils a wishlist for public charging stations that mirrors the conveniences of the traditional gas station, but with a modern twist. Clear signage, charging speed and pricing information, alongside amenities like windshield cleaners, air pumps, and vacuums, are among the top demands. This isn’t just about fueling cars; it’s about refueling the driver’s spirit with a touch of convenience and comfort.

The study offers more than just a peek into consumer preferences; it serves as a beacon for the automotive industry, guiding manufacturers and service providers through the evolving landscape of consumer desires. With insights gleaned from AutoPacific’s annual Future Attribute Demand Study, industry players are equipped with the intelligence needed to navigate the future market. This research isn’t just groundbreaking; it’s transformative, painting a vivid picture of a future where electric vehicles are not only desired but are also supported by an ecosystem that caters to the nuanced needs of the driver.

So, what’s the takeaway from all this data and desire? The shift to electric vehicles is unfolding as a comprehensive reimagining of the automotive experience. This isn’t merely about swapping gas for electricity; it’s about redefining what it means to drive, to refuel, and to enjoy the journey. As we race toward electrification, the findings from AutoPacific challenge the industry to innovate, ensuring that the evolution of EV technology and infrastructure addresses both the practical and experiential aspects that make electric vehicles genuinely enticing.

As American drivers stand on the threshold of this electric revolution, it’s clear that the path forward will be charted by more than just the cars we drive. It will be defined by how seamlessly we integrate these new vehicles into our lives, making certain that the future of mobility is not only sustainable but also resonant with the aspirations of its drivers. The electrified future is on the horizon, and it promises a journey filled with innovation, sustainability, and a new vision for the automotive experience. Stay tuned; the best is yet to come.

0 notes

automotiveera · 9 months

Text

Automotive Fuel Transfer Pumps Market: Trends, Innovations, and Global Growth Insights

The size of the automotive fuel transfer pumps market was USD 1,831 million in 2021, and it will grow at a rate of 5.8% in the years to come, to reach USD 3,041 million by 2030, according to a report of P&S Intelligence.

Electric-technology-based pumps led the industry in the recent past, due to their improved performance and higher efficiency in comparison to mechanical pumps.

Furthermore, electric pumps offer numerous benefits, including improved pressure regulation, a lower wear and tear risk, and high strength. These devices are capable in operating at pressures between 30 and 40 pounds per square inch.

Vehicles featuring advanced injection systems make use of such pumps as these components are relatively safe and supply fuel to the engine proficiently, with a low loss of power. Electric vacuum fuel transfer pumps too help in the lessening of emissions of carbon dioxide from engines.

So, the acceptance of electricity-based injecting machines is relatively high, ensuing an increase in the price of an automobile. With the increasing awareness around the benefits, consumers are requiring automobiles fortified with electric pumps for transfer of gasoline.

The automobile fuel transfer pumps market was dominated by APAC and it will register the highest CAGR, of above 6.4%, in the years to come. The development of the automotive industry in China has grabbed the attention of numerous international automakers. Home to the major auto sector globally, the nation experiences a boom in the integration of components, transferring fuel from the tank to the engine.

Furthermore, the nation’s rapid embrace of hybrid vehicles has formed an increase in the sales of car, which bids a lot potential to auto component makers in the Peoples Republic.

#Automotive Fuel Transfer Pumps #Market Trends #Innovations #Global Growth Insights #Automotive Sector #Fuel Distribution #Market Players #Competitive Landscape #Pump Technology Advancements #Smart Fuel Transfer Systems

0 notes

guanshentai · 1 year

Text

Features and applications of automatic blister packaging machine

　　Automatic blister packaging machine (also known as thermoplastic molding machine) is used to absorb heat-plasticized PVC, PE, PP, PET, HIPS and other thermoplastic coils into various shapes of advanced packaging and decoration boxes, frames and other products. machine. Using the vacuum suction generated by the vacuum pump, the heated and softened thermoplastic sheets such as PVC and PET are molded into various shapes of vacuum covers, blister trays, blisters, etc. through molds.

　　1. Principle of blister forming machine

　　Blister molding is also called thermoplastic molding. This molding process mainly uses the vacuum suction generated by the vacuum pump to heat and soften PVC, PET, PETG, APTT, PP, PE, PS and other thermoplastic sheets through molds. Vacuum covers of various shapes, or attached to the surface of products of various shapes. According to the thickness of the sheet, blister is divided into thin sheet blister and thick sheet blister.

　　At present, the common product sheet blisters on the market include: daily necessities blister packaging, hardware blister packaging, automotive supplies blister packaging, electronic products blister packaging, food blister packaging, cosmetics blister packaging, computer peripheral equipment blister packaging, Blister packaging for toys, blister packaging for sporting goods, blister packaging for stationery, etc.

　　The main structure of the machine is composed of feeding, pulling, upper and lower electric heating furnaces, lower gate, multi-functional adjustable size, lower mold plate, upper mold, upper gate, knife gate, slicing, releasing and equipped with vacuum devices, etc. ;Pneumatic device is the main power source, and the pulling and feeding of the film adopts electric, reducer, time relay, intermediate relay, travel switch and other electrical appliances to form a fully automatic control system.

　　The common products of thick sheet blister include: household appliances liner shell, luggage, display rack accessories, decoration, car interior, bumper, fender, beauty equipment, light box shell, toy car shell, industrial panel, advertising light box, Plastic LOGO, bathroom products, refrigerator liner, etc.

　　2. Main application of blister machine

　　Plastic packaging industry (blister packaging, plastic, batteries, toys, gifts, hardware, home appliances, electronics, stationery, decoration); food packaging industry (fast food boxes, fruit trays, biscuit boxes); pharmaceutical industry (pill packaging, tablet packaging) ; Industrial cooling tower cooling water deflectors, etc.; three-dimensional relief patterns for decoration, plastic ceilings, wall panels, automotive materials, sanitary equipment and other manufacturing industries.

　　Suitable for the production of various color sheets: polyethylene PS, polyvinyl chloride PVC, plexiglass, abs, polymethyl methacrylate; flocking sheets; environmentally friendly sheets APET, PET, PP, etc.; photodegradable materials; biodegradable Materials and other plastic products.

　　3. Main features of blister machine

　　Strong product specification adaptability Blister molding method can be used to manufacture various products of extra large, extra small, extra thick, and extra thin. The sheet can be as thin as 1~2MM, or even thinner. A few square millimeters, the wall thickness can be as large as 20mm, as small as 0.1mm;

　　Blister packaging for daily necessities, plastic packaging for small hardware, plastic packaging for automotive supplies, plastic packaging for electronic products, plastic packaging for food, plastic packaging for cosmetics, plastic packaging for computer peripheral equipment, plastic packaging for toys, sporting goods Blister packaging, stationery blister packaging, etc.;

　　Less equipment investment; convenient mold manufacturing (plaster mold, copper mold, aluminum mold); high production efficiency. Saving raw and auxiliary materials, light weight, convenient transportation, good sealing performance, in line with the requirements of environmentally friendly green packaging; can pack any special-shaped products, without additional cushioning materials for packing; the packaged products are transparent and visible, beautiful in appearance, easy to sell, and suitable for Mechanized and automated packaging facilitates modern management, saves manpower and improves efficiency.

　　Commonly used thermoforming plastics and performance plastics can be divided into two categories: thermoplastics and thermosetting plastics according to their heating behavior. Most of the materials used for thermoforming are thermoplastic materials. Regardless of single-layer or multi-layer composite plastic sheet (board) used for thermoforming processing, it must have the following technological properties: plastic memory; thermal stretching; thermal strength; forming temperature.

#Automatic blister packaging machine

0 notes

esgdatainrate · 1 year

Text

IE4 Permanent Magnet Synchronous Motors Forecast to 2031 with Key Companies Profile, Supply, Demand and SWOT Analysis

IE4 Permanent Magnet Synchronous Motors Market Outlook — 2025

The global IE4 permanent magnet synchronous motors market size was valued at $85,153 thousand in 2013, and is projected to reach $206,623 thousand by 2025, growing at a CAGR of 9.8% from 2018 to 2025. IE4 permanent magnet synchronous motors is a super-premium efficiency class motor, which is designed and manufactured according to the energy efficiency motors program to encourage end users to use higher efficiency motors. The aim of utilization of IE4 permanent magnet synchronous motors is to reduce energy consumption and minimize CO2 emissions. These motors are further used to drive industrial fans, pumps, compressors, and other mechanical applications, which fuel their adoption.

In addition, IE4 motors find their application in numerous robotic processes. Factors such as speed, acceleration, torque requirements, control, and angular movements make IE4 motors an ideal choice for robotic system manufacturers. Efficiency and performance have increased owing to rising demand for superior machine control, thereby improving the performance of equipment where IE4 motors are installed. Efficiency and performance have increased owing to rising demand for superior machine control.

Upsurge in adoption of green technologies is gaining popularity across the world. The benefits energy-efficient IE4 motors offer over standard motors include low fan losses and high-quality insulation & lamination. Such factors have a prominent impact on the demand for energy-efficient IE4 motors across various end-use industries. In addition, implementation of stringent regulations and laws related to the environment, such the EP Act and Minimum Energy Performance Standards (MEPS), drives the demand for these motors across the globe. Industries such as material handling systems, compressed air, HVAC, refrigerators, pumps, and ventilation serve as the key consumers of energy-efficient IE4 motors, thus fueling their demand across the globe. In addition, the blowers and the wind power sectors are anticipated to exhibit high demand for these motors in the coming years.

On the basis of application, the market is classified into material handling, liquid pumps, fans & ventilation, cooling compressors, air compressors & vacuum pumps, blowers, and coolers. In 2017, the air compressors & vacuum pumps segment held the largest share, due to increase in demand for compressors systems in manufacturing and automotive industries.

Region wise, the market is analyzed across North America, Europe, Asia-Pacific, and LAMEA. In 2017, Asia-Pacific accounted for the highest share, and is anticipated to secure the leading position during the forecast period. This is attributed to industrial growth in the developing countries such as India and China. China is a pioneer in the IE4 permanent magnet synchronous motors market. Therefore, IE4 permanent magnet synchronous motors market share is highest among the Asia-Pacific countries.

Competition Analysis

The major players operating in the global IE4 permanent magnet synchronous motors market include ABB, Altra Industrial Motion Corp, Anhui Wannan Electric Machine Co., Ltd., Bharat Bijlee, CG global, Danfoss, Fuji Electric Co., Ltd., Hitachi Ltd., Kaeser Kompressoren, Kienle + Spiess GmbH, KSB SE & Co. KGaA, Lafert, Merkes GmbH, Nidec, NORD Drive systems, O.M.E. Motori Elettrici s.r.l., OEMER, Siemens AG, Toshiba Corporation, Weg S.A., and VEM Group. Key players adopted product launch and partnership as its key developmental strategy to sustain the intense competition and improve its product portfolio. For instance, in December 2017, Nord Drivesystems expanded its portfolio of smooth-surface permanent-magnet synchronous motor by launching IE4 or Super Premium Efficiency synchronous motors for applications in food, beverage, and pharmaceutical industries. similarly, in January 2019, WEG S.A, established partnership with Iberian pork producer located in Badajoz, Spain. According to the partnership agreement WEG S.A has provided a W22 Magnet IE4 electric motors for compressors operation of its new refrigeration unit at the Mafresa facilities for cold production.

Many competitors in IE4 permanent magnet synchronous motors market adopted product launch and partnership as its key developmental strategies to sustain the intense competition and improve their product portfolio. For instance, Kaeser established partnership with a renowned motor manufacturer to develop IE4 motors for next-generation compressor packages. Moreover, in December 2017, Nord Drive Systems expanded its portfolio of smooth-surface permanent-magnet synchronous motor by launching IE4 or super-premium efficiency synchronous motors for applications in food, beverage, and pharmaceutical industries.

Full Report With TOC:-https://www.alliedmarketresearch.com/ie4-permanent-magnet-synchronous-motors-market

0 notes

businessinfinity · 1 year

Text

0 notes

businessindustry · 3 months

Text

Vacuum Sucker Market Size, Share 2024 to 2032

The Reports and Insights, a leading market research company, has recently releases report titled “Vacuum Sucker Market: Global Industry Trends, Share, Size, Growth, Opportunity and Forecast 2023-2031.” The study provides a detailed analysis of the industry, including the global Vacuum Sucker Market share, size, trends, and growth forecasts. The report also includes competitor and regional analysis and highlights the latest advancements in the market.

Report Highlights:

How big is the Vacuum Sucker?

The global vacuum sucker market revenue was USD 860.61 Million in 2021. The expected revenue CAGR over the forecast period is 6.4% and the market value is expected to reach USD 1127.26 Million in 2031.

What are Vacuum Sucker Market?

A vacuum sucker is a device crafted to generate suction by eliminating air or other gases from a confined space, inducing a partial vacuum. It usually involves a pump or mechanism that evacuates air from an enclosed area, generating negative pressure, consequently attracting fluids, particles, or objects towards the vacuum source. Vacuum suckers are utilized in a wide range of applications, ranging from household vacuum cleaners employing suction to eliminate dirt and debris to industrial settings where they play a crucial role in material handling, packaging, and diverse manufacturing processes requiring the extraction of air or gases.

Request for a sample copy with detail analysis: https://www.reportsandinsights.com/sample-request/1901

What are the growth prospects and trends in the Vacuum Sucker Market industry?

The vacuum sucker market growth is driven by various factors. The vacuum sucker market is witnessing robust growth, driven by a rising demand across various industries. These devices, designed to generate suction and create a partial vacuum, are finding increased applications in manufacturing, packaging, and material handling sectors. The market is experiencing continuous expansion with technological advancements, leading to product innovations and improved capabilities. Globally, the vacuum sucker market is characterized by competitiveness, as key players emphasize research and development to introduce efficient and adaptable suction solutions that meet the evolving requirements of diverse industries. Recognizing the advantages of vacuum suckers in enhancing processes and efficiency, industries are contributing to the ongoing expansion of the market. Hence, all these factors contribute to vacuum sucker market growth.

What is included in market segmentation?

The report has segmented the market into the following categories:

By Type:

Electric Vacuum Suckers

Pneumatic Vacuum Suckers

Hybrid Vacuum Suckers

By End-Use Industry:

Automotive

Electronics

Food & Beverage

Packaging

Pharmaceutical

Logistics & Warehousing

Others

By Application:

Material Handling

Assembly & Robotics

Pick & Place

Packaging & Palletizing

Inspection & Testing

Others

By Sales Channel:

Direct Sales

Distributors/Wholesalers

E-commerce

Global Market Segmentation by Region:

North America:

United States

Canada

Europe:

Germany

United Kingdom

France

Italy

Spain

Russia

Poland

BENELUX

NORDIC

Rest of Europ

Asia Pacific:

China

Japan

India

South Korea

ASEAN

Australia & New Zealand

Rest of Asia Pacific

Latin America:

Brazil

Mexico

Argentina

Rest of Latin America

Middle East & Africa:

Saudi Arabia

South Africa

United Arab Emirates

Israel

Rest of MEA

Who are the key players operating in the industry?

The report covers the major market players including:

Piab AB

Schmalz Inc.

Festo AG & Co. KG

SMC Corporation

Aventics GmbH

VACUUBRAND GMBH + CO KG

Vaccon Company, Inc.

SMC Corporation of America

Pneumadyne, Inc.

Schmalz GmbH

Vuototecnica S.p.A.

DESTACO, a Dover Company

ANVER Corporation

AERO-LIFT Vakuumtechnik GmbH

VMECA Co., Ltd.

Discover more: https://www.reportsandinsights.com/report/Vacuum Sucker-market

If you require any specific information that is not covered currently within the scope of the report, we will provide the same as a part of the customization.

About Us:

#Vacuum Sucker Market Size #Vacuum Sucker Market Share #Vacuum Sucker Market Demand #Vacuum Sucker Market Analysis

0 notes

trendingreportz · 4 months

Text

Electric Motor Market - Forecast(2024 - 2030)

Electric Motor Market Overview

Electric Motor Market Size is forecast to reach $169 billion by 2030, at a CAGR of 5.6% during 2024-2030. The increase in global electricity consumption and the use of electrical equipment and machines in different industries and the renewables sector are major factors driving the growth in the electric motor market during the forecast period. An increase in awareness of green vehicles among customers has been a key factor leading the market. Besides this, a rising number of government incentives to encourage sales of green vehicles for safeguarding the environment from carbon emissions is analysed to drive the market. The growing interest in sustainable transportation has driven the demand for electric vehicles. Electric motors play a crucial role in powering EVs, and advancements in motor technology contribute to increased efficiency and range. The industrial sector is witnessing the integration of electric motors with the Internet of Things (IoT) and Industry 4.0 technologies. This integration allows for real-time monitoring, predictive maintenance, and improved efficiency in industrial processes.

Smart motor technologies, incorporating features like connectivity, sensors, and advanced control systems, are becoming more prevalent. These innovations contribute to better performance, remote monitoring, and enhanced automation in various applications. Developments in motor control systems, including advanced algorithms and power electronics, contribute to improved motor performance, reduced energy losses, and enhanced control precision. There is an increasing emphasis on developing more energy-efficient electric motors to meet sustainability goals and reduce energy consumption. Regulations and standards promoting energy efficiency also influence the design and manufacturing of electric motors. Additionally, Electric motors have been observing several advancements in technology over the past few years, owing to which its demand is set to gain higher traction during the forecast period 2024-2030.

Report Coverage

The report: “Electric Motor Market Report– Forecast (2024-2030)”, by IndustryARC covers an in-depth analysis of the following segments of the Electric Motor market

By Product Type: AC Motor (Induction Motor, Synchronous Motor, Servo Motor, Stepper Motor), DC Motor (Brushed DC Motor, Brushless DC Motor, Servo Motor, Series Motor, Stepper motor, Compound Motor).

By Product Category: Permanent Magnet, Non-Permanent Magnet.

By Phase: Single Phase, Three Phase.

By Power Rating: Below 0.5W, 0.5W-1W, 1W to 100W, 100W to 1KW, 1KW to 10KW, 10KW and Above.

By Efficiency: IE1, IE2, IE3, IE4.

By Application: Commercial (Automated Doors, Elevators & Escalators, Blowers, Electric Sweepers, Hand Dryers, Data Center & UPS, Pumps, Power Tools, Water Coolers, Camera PTZ Control, Drones, Others), Consumer Products (Pumps, Hair Dryers, Lawn Mowers, Boilers, Dishwashers, Vacuum Cleaners, washing machine, Blenders & Mixers, Fans & Chimneys, Desktop & Laptops, Smartphones, Refrigerators, Others), Automotive (Body Control motors, EPS Motors, Brake Booster BLDC Motor, Seat Adjustment, Belt Tensioner, Car Window Motor, Door Lock Motors, Wiper Motor, Others), Medical & Healthcare (Diagnostic Equipment (CT Scanners, MRI, Biopsy Systems, Diagnostics Analyzers, Ultrasound Transducers, X-Ray, Others), Medical Centrifuges, Medical Pumps, Blowers and Compressors, Surgical Instruments (Saws, Drills, Surgical Robots, Others), Dental CAD/CAM Milling Machines, Exoskeleton & Prosthetics, Microscopes, Wheelchairs & Scooters, Stair Lifts, Hospital Beds & Exam Tables, Others).

By Geography: North America (U.S, Canada, Mexico), South America(Brazil, Argentina and others), Europe(Germany, UK, France, Italy, Spain, Russia, Netherlands, Poland, Czechia, Belgium, Sweden and Others), APAC(China, Japan India, SK, Aus and Others), and RoW (Middle East and Africa)

Request Sample

Key Takeaways

• The rising demand for efficient energy usage over concerns of environmental impact of energy generation from conventional sources such as coal and natural gas, is expected to help grow the electric motor market in APAC.

• The DC Motor segment is growing at a significant CAGR of 7.6% in the forecast period 2024-2030. A DC motor consists of a stator and a rotor.

• Medical & Healthcare sector is expected to witness a highest CAGR of 8.5% the forecast period 2024-2030, due to its extensive reliance on electrically powered devices and equipment. Diagnostic imaging equipment, such as MRI and CT scanners, demands high-performance electric motors for precise movements and accurate imaging.

• Electric Motor companies are strengthening their position through mergers & acquisitions and continuously investing in research and development (R&D) activities to come up with solutions to cater to the changing requirements of customers.

Electric Motor Market Segment Analysis - By Product Type

The DC Motor segment is expected to grow at a significant CAGR of 7.6% during the forecast period 2024-2030. Owing to the growing penetration of brushless DC motors across various industry verticals substituting brushed dc and even ac induction motors in certain applications such as home appliances. DC motors are used in electric vehicles in the automotive industry for various non-traction applications, contributing to the ongoing shift towards sustainable transportation. As the demand for electric vehicles grows, so does the demand for efficient and dependable DC motors. DC motors are also widely used in industrial automation, powering conveyor systems, robotics, and manufacturing equipment. Owing to the ease of control, they are suitable for accurate and regulated movements in automated processes.

Inquiry Before Buying

Electric Motor Market Segment Analysis - By Application

Medical & Healthcare sector is expected to witness a highest growth of CAGR 8.5% during the forecast period 2024-2030, owing to the increase in investments in healthcare and medical sector, along with growing penetration of advanced medical devices & equipment in the sector such as surgical robots, advanced imaging & diagnostic equipment, prosthetics and so on. Medical advances and technical improvements have resulted in the development of a wide range of medical instruments and gear that significantly rely on the precision and efficiency provided by electric motors. High-performance electric motors are required for precise motions and accurate imaging in diagnostic imaging equipment such as MRI and CT scanners. Electric motors provide stability and consistency to patient care and monitoring systems such as infusion pumps and monitoring equipment. Furthermore, the incorporation of electric motors in mobility aids such as electric wheelchairs and patient lifts improves accessibility for people who have mobility issues. Electric motors are used in laboratory equipment, robotic surgical systems, and a variety of medical tools, all of which contribute to the overall efficiency and improvement of healthcare techniques. The demand for electric motors is on the rise as the healthcare industry evolves and adopts more technologically sophisticated solutions, fueling additional innovation in this critical sector.

Electric Motor Market Segment Analysis - By Geography

Electric Motor market in Asia-Pacific region held significant market share of 38% in 2023. Increasing compliance for energy efficient motors and rising adoption of motor-driven electric vehicles are the key factors driving market growth. The rising demand for efficient energy usage over concerns of environmental impact of energy generation from conventional sources such as coal and natural gas, is expected to help grow the electric motor market. In addition, advancements in the agriculture sector and enormous investments in industrialization in countries such as China, India, South Korea, and Australia is driving the market growth. Further, the increasing production and sales of electric vehicles in countries including China and Japan is also analyzed to drive the market growth.

Schedule a Call

Electric Motor Market Drivers

Rise in demand for Electric Vehicles

The electric car market has witnessed rapid evolution with the ongoing developments in automotive sector and favorable government policies and support in terms of subsidies and grants, tax rebates. Major manufacturers such as General Motors, Toyota, and BMW plan to release a potential of 400 models and estimated global sales of 25 million by 2025. In 2022, Ford Motor has committed to increase its investments in electric vehicles to $50 billion by 2026, up from a previous spend of $30 billion by 2025. Similarly, in 2020, Volkswagen, Chinese ventures has committed to invest $17.5 billion in electric vehicles by 2025. As electric vehicles use various types of electric motors for traction & auxiliary applications, the rising demand for electric vehicles globally is set to assist the market growth for electric motors used in the same.

Growing R&D activities

Manufacturers are continuously focusing on R&D to develop new and effective electric motors to meet consumer demand. Increasing concerns, such as environmental pollution and regulations, are forcing manufacturers to develop electric motors that reduce vibration and increase efficiency. For instance, a synchronous electric motor is around 80% more efficient than an induction electric motor. Similarly, the development of a new type of steel for electric motors, which reduces the weight of the electric motor and makes it more efficient and powerful. This new type of electric motor will be small in size and cost effective, which will raise demand from residential and commercial applications. Moreover growing developments from various companies is also analysed to drive the market growth. Hence these factors are analysed to drive the market growth in the forecast period 2024-2030.

Electric Motor Market Challenges

Easy availability of low-quality electric motors

The market for electric motors is highly fragmented, with a significant number of domestic and international manufacturers. Product quality is a primary parameter for differentiation in this market. The organized sector in the market mainly targets industrial buyers and maintains excellent product quality, while the unorganized sector offers low-cost alternatives to tap local markets. Local manufacturers of electric motors in most countries target the unorganized sector and compete strongly with the global suppliers in the respective markets. Leading market players are currently exposed to intense competition from such unorganized players supplying inexpensive and low-quality electric motors. This acts as a key challenge for the growth of the market.

Buy Now

Market Landscape

Product launches, acquisitions, Partnerships and R&D activities are key strategies adopted by players in the Electric Motor market. Electric Motor top 10 companies include:

ABB Ltd

Johnson Electric Holdings Limited

Siemens AG

Rockwell Automation

Nidec Corporation

Bosch Electric

Regal Rexnord

Franklin Electric Company Inc.

Teco Electric & Machinery Co. Ltd.

Wolong Electric Group co. ltd.

Acquisitions/Product Launches

• In July 2023, Nidec Corporation announced that it has successfully developed a new electric power steering motor power pack*1 (“EPS-PP”).

• In July 2023, WEG announced new investments for its motor manufacturing plant located in Manaus, Brazil. The Company will invest R$ 48 million, in the next three years, to expand production capacity and adapt the plant to produce a new line of permanent magnet electric motors for split-type air conditioners

• In December 2023, Johnson Electric Launches 48-Volt Cooling Fan Module with High Power and Efficiency. Johnson Electric is pleased to announce the launch of the 48-Volt Cooling Fan Module with power up to 1.5kW to meet the most demanding cooling requirements. The need to reduce emissions and increase the electrification of the vehicle, requires higher cooling performance and efficiency.

#Electric Motor Market #Electric Motor Market size #Electric Motor industry #Electric Motor Market share #Electric Motor top 10 companies #Electric Motor Market report #Electric Motor industry outlook

0 notes

boatarenttahoe · 3 months

Text

Alkenyl Succinic Anhydride (ASA) Market Trends, Demand & Future Scope till 2032

Alkenyl Succinic Anhydride (ASA) Market provides in-depth analysis of the market state of Alkenyl Succinic Anhydride (ASA) manufacturers, including best facts and figures, overview, definition, SWOT analysis, expert opinions, and the most current global developments. The research also calculates market size, price, revenue, cost structure, gross margin, sales, and market share, as well as forecasts and growth rates. The report assists in determining the revenue earned by the selling of this report and technology across different application areas.

Geographically, this report is segmented into several key regions, with sales, revenue, market share and growth Rate of Alkenyl Succinic Anhydride (ASA) in these regions till the forecast period

North America

Middle East and Africa

Asia-Pacific

South America

Europe

Key Attentions of Alkenyl Succinic Anhydride (ASA) Market Report:

The report offers a comprehensive and broad perspective on the global Alkenyl Succinic Anhydride (ASA) Market.

The market statistics represented in different Alkenyl Succinic Anhydride (ASA) segments offers complete industry picture.

Market growth drivers, challenges affecting the development of Alkenyl Succinic Anhydride (ASA) are analyzed in detail.

The report will help in the analysis of major competitive market scenario, market dynamics of Alkenyl Succinic Anhydride (ASA).

Major stakeholders, key companies Alkenyl Succinic Anhydride (ASA), investment feasibility and new market entrants study is offered.

Development scope of Alkenyl Succinic Anhydride (ASA) in each market segment is covered in this report. The macro and micro-economic factors affecting the Alkenyl Succinic Anhydride (ASA) Market

Advancement is elaborated in this report. The upstream and downstream components of Alkenyl Succinic Anhydride (ASA) and a comprehensive value chain are explained.

Browse More Details On This Report at @https://www.globalgrowthinsights.com/market-reports/alkenyl-succinic-anhydride-asa-market-101472

Global Growth Insights

Web: https://www.globalgrowthinsights.com

Our Other Reports:

Alkenyl Succinic Anhydride (ASA) Market Size

Podcasting Market Growth Rate

Cap Applicators Market Analysis

Hard Seltzer Market Share

Sports And Fitness Nutrition Supplements Market Growth

Geographic Information System (GIS) Software Market

Global Online Taxi Service Market Size

Global Air Disc Brakes (ADB) Market Growth

Semiconductor Vacuum Pump After Market Forecast

Global Privacy Management Software Market Share

Water Filter Jugs Market Growth Rate

Polyester Resins Market Size

Sulforaphane Market Share

Rolled Annealed Copper Foil Market Analysis

Custom Clothing (Made to Measure) Market

Ultra-High Molecular Weight Polyethylene (UHMWPE) Market Growth

Global Flexible Printed Batteries Market Growth

Global Gaseous Helium Market Size

Global Dental Plaster Market Share

Human Milk Oligosaccharides Market Forecast

Sports Bras Market Size

Capsule Endoscopy System Market Growth Rate

Electric Parking Brake Market Analysis

Food Safety HACCP Software Market Share

Education Technology (EdTech) Market Growth

Fluorescent In Situ Hybridization Probe (Fish Probe) Market

Global Specialized Formula Medical Nutrition Market Size

Global Ultra-Fine Aluminum Hydroxide Market Growth

Automotive CMOS Image Sensor Market Forecast

Global Mixed Reality Headsets Market Share

FOLLICLE-STIMULATINGÃ‚Â HORMONEÃ‚Â (FSH) Market Growth Rate

GPS Anti-Jamming System Market Size

Medical Isotopes Market Share

Cash Back and Rewards App Market Analysis

Autonomous Mobile Robots Market

Fitness Nutrition Drinks Market Growth

Global Safety Motion Control Market Growth

Global Premium Motorcycle Helmet Market Size

Global Tamping Machine Market Share

Olfactory Technology Product Market Forecast

#Alkenyl Succinic Anhydride (ASA) Market Size #Alkenyl Succinic Anhydride (ASA) Market Share #Alkenyl Succinic Anhydride (ASA) Market Trends #Alkenyl Succinic Anhydride (ASA) Market Industry #Alkenyl Succinic Anhydride (ASA) Market Growth

0 notes