#Automotive Engine Piston Market Growth

[ragini-14]

Automotive Engine Piston Market SWOT Analysis, Business Growth Opportunities by Top Companies and Key Players

Global Automotive Engine Piston Market research report published by Exactitude Constancy reveals the current outlook of the global and key regions from the following perspectives: Key players, countries, product types, and end industries. The report studies the top companies in the global market and divides the market into several parameters. This Automotive Engine Piston Market research report pinpoints the industry's competitive landscape to understand the international competition. This report study explains the expected growth of the global market for the upcoming years from 2024 to 2030. This research report is accumulated based on static and dynamic perspectives on business.

The global automotive engine piston market is expected to grow at a 4.0% CAGR from 2024 to 2030. It is expected to reach above USD 2.82 billion by 2030 from USD 1.98 billion in 2023.

Browse Complete Summary and Table of Content @

https://exactitudeconsultancy.com/ja/reports/4749/automotive-engine-piston-market/

[tamanna31]

Lubricants Market Dynamics, Top Manufacturers Analysis, Trend And Demand, Forecast To 2030

Lubricants Industry Overview

The global lubricants market size was estimated at USD 139.44 billion in 2023 and is projected to grow at a compound annual growth rate (CAGR) of 3.8% from 2024 to 2030.

This is attributed to the growing demand for automotive oils and greases due to the growing trade of vehicles and spare parts. Lubricants are an essential part of rapidly expanding industries. They are used between two relatively moving machinery parts to reduce friction and wear & tear. They can be either petroleum-based or water-based and are essential for proper machinery functioning. Lubricants also decrease operational downtime and eventually increase overall productivity. Lubricants are extensively used in processing industries and automobile parts, especially brakes and engines, which need lubrication for continuous smooth functioning.

Gather more insights about the market drivers, restrains and growth of the Lubricants Market

The increasing imports and exports of piston engine lubricants are contributing to market growth. The product demand is driven by the rising focus of consumers on enhancing vehicle performance coupled with the introduction of innovative & premium product offerings. Future growth will be highly dependent on motor vehicle production and the miles covered by each vehicle. Furthermore, consumers are looking for standard and specialized lubricants for their regular vehicles to ensure the smooth functioning of their vehicles and reduce long-term maintenance costs.

Lubricant manufacturing requires crude oil, tight oil, and other additives to formulate all lubricant types. There are multiple additives incorporated in lubricants to enhance their functionality and properties. These include antioxidants, extreme pressure additives, rust- & corrosion-prevention additives, detergents, viscosity index improvers, anti-wear agents, and dispersants. Lubricants are 90% base oil and 10% additives, wherein base oils include petrochemical fractions, such as fluorocarbons, esters, polyolefin, and silicones. Base oils increase the viscosity of the lubricants and reduce wear & tear. Paraffinic and naphthenic are the two essential base oils used in lubricant formulations.

Browse through Grand View Research's Petrochemicals Industry Research Reports.

• The global naphtha market size was valued at USD 189.5 billion in 2023 and is projected to grow at a CAGR of 4.3% from 2024 to 2030.

• The global diesel exhaust fluid market size was valued at USD 36.66 billion in 2023 and is projected to grow at a CAGR of 7.9% from 2024 to 2030.

Key Lubricants Company Insights

The global lubricants market is competitive with a large number of well diversified regional, and independent small scale and large scale manufacturers and suppliers. The small-scale companies majorly compete on the basis of price, after sales service and delivery timelines. Whereas the large scale companies focus on product development and innovations as well as marketing strategies.

Some of the key players operating in the market include Exxon Mobil Corp, Shell, and TotalEnergies

ExxonMobil Corp. is a global manufacturer & supplier of synthetic lubricants. The company mainly deals in three business segments that include upstream (oil & gas, E&P, shipping and wholesale operations), downstream (refining, marketing and retail operations) and chemicals. ExxonMobil owns 37 oil refineries in 21 countries with refining capacity of 6.3 million barrels per day.

Shell is a global leader as a group of petrochemical and energy companies, with presence across 70 countries and over 90,000 employees. The group provides fuels, car services, oils, and is also engaged in production, exploration, and refining of petroleum products. The group offers lubricants for industrial and transport businesses along with lubrication process and services.

Total Energies. is oil & gas integrated company. The company has its business segments in upstream, refining & specialty chemicals, and marketing & services. Total Oil India Private Ltd. is an entirely owned subsidiary of TOTAL. It has exploration and production activities in more than 50 countries. The company has a broad catalogue of lubricants for various markets such as agriculture, vehicles, aviation, energy, and chemicals, among others.

Key Lubricants Companies:

The following are the leading companies in the lubricants market. These companies collectively hold the largest market share and dictate industry trends. Financials, strategy maps & products of these lubricants companies are analyzed to map the supply network.

ExxonMobil Corp.

Royal Dutch Shell Co.

BP PLC.

Total Energies

Chevron Corp.

Fuchs

Castrol India Ltd.

Amsoil Inc.

JX Nippon Oil & Gas Exploration Corp.

Philips 66 Company

Valvoline LLC

PetroChina Company Ltd.

China Petrochemical Corp.

Idemitsu Kosan Co. Ltd.

Lukoil

Petrobras

Petronas Lubricant International

Quaker Chemical Corp.

PetroFer Chemie

Buhmwoo Chemical Co. Ltd.

Zeller Gmelin Gmbh & Co. KG

Blaser Swisslube Inc

Recent Developments

In January 2024, Shell U.K. Limited acquired MIDEL and MIVOLT from M&I Materials Ltd. The products of the latter two will be produced and distributed as part of Shell’s Lubricants portfolio. The acquisition will help Shell to strengthen its position in Transformer Oils, which finds use in offshore wind parks, utility companies, and power distribution.

From September 2023, TotalEnergies Lubrifiants accelerated the inclusion of recycled plastics (50% PCR high-density polyethylene) in its lubricants bottles, following a pilot project launched in 2021 called Quartz Xtra bottles. This aims at contributing to a circular economy and in decline of usage of virgin plastic.

In March 2023, ExxonMobil announced investing around INR 900 crore (~USD 110 million) for constructing a lubricants production plant in Raigad, Maharashtra, India. Upon completion, plant’s annual production capacity is expected to be 159,000 kl of finished lubricants. This plant will cater to growing demand from industries such as mining, construction, power, steel, and manufacturing, among others.

Order a free sample PDF of the Lubricants Market Intelligence Study, published by Grand View Research.

[aceforge12-blog]

Automotive Parts Manufacturers in India: The Excellence of Aceforge Pvt Ltd

India’s automotive industry is a significant contributor to the country’s economy and is rapidly growing, supported by a strong network of automotive parts manufacturers. Companies like Aceforge Pvt Ltd have played a pivotal role in this growth, establishing themselves as reliable suppliers of high-quality automotive components. With a focus on precision engineering, innovation, and sustainability, Aceforge stands out as one of the leading names in the automotive parts manufacturing sector in India.

The Booming Automotive Parts Industry in India

India's automotive parts manufacturing industry is thriving, driven by a growing domestic market, increasing vehicle production, and a booming export sector. The industry encompasses a wide range of components, from simple fasteners to complex electronic systems, catering to passenger vehicles, commercial vehicles, two-wheelers, and electric vehicles (EVs). Indian manufacturers have gained recognition for delivering quality, affordability, and timely services, making India a preferred sourcing destination for global Original Equipment Manufacturers (OEMs) and Tier 1 suppliers.

Aceforge Pvt Ltd: A Trusted Name in Automotive Parts Manufacturing

Aceforge Pvt Ltd is a distinguished name in the Indian automotive parts manufacturing landscape. With decades of experience, a commitment to quality, and a customer-centric approach, Aceforge has become synonymous with excellence in the industry. The company specializes in manufacturing a wide range of automotive components that meet the stringent requirements of both domestic and international markets.

Key Strengths of Aceforge Pvt Ltd:

Advanced Manufacturing Capabilities: Aceforge's state-of-the-art manufacturing facilities are equipped with the latest technology and machinery to ensure precision and efficiency. The company employs automated processes, CNC machining, and robotics to achieve consistent quality and high production volumes.

Diverse Product Range: Aceforge offers a comprehensive range of automotive parts, catering to various segments of the automotive industry:

Engine Components: High-precision parts like pistons, camshafts, and connecting rods that are essential for engine performance and longevity.

Transmission Components: Durable gears, shafts, and clutches that ensure smooth and efficient power transfer in vehicles.

Suspension and Steering Parts: Robust control arms, tie rods, and stabilizer links that provide stability and control.

Brake Systems: Advanced brake pads, discs, and calipers designed to deliver superior stopping power and safety.

Electrical and Electronic Components: Reliable wiring harnesses, sensors, and control modules essential for modern vehicles.

Quality Assurance: Quality is a non-negotiable aspect of Aceforge's operations. The company adheres to strict quality control measures and complies with international standards such as ISO 9001, IATF 16949, and TS 16949. Each product undergoes rigorous testing and inspection to ensure it meets or exceeds customer expectations.

Innovation and Research & Development (R&D): Aceforge is committed to continuous innovation and invests heavily in R&D to develop new products, improve existing ones, and integrate the latest technologies. This focus on innovation allows the company to offer cutting-edge solutions and stay ahead of market trends.

Sustainability Initiatives: Aceforge is dedicated to sustainable manufacturing practices. The company utilizes eco-friendly materials, reduces waste, and incorporates energy-efficient processes in its manufacturing operations, contributing to a greener environment.

Customer-Centric Approach: At Aceforge, customer satisfaction is a top priority. The company works closely with its clients to understand their specific needs and provide customized solutions that add value to their operations. Timely delivery, competitive pricing, and exceptional after-sales support are hallmarks of Aceforge’s customer service.

Why Choose Aceforge Pvt Ltd for Automotive Parts Manufacturing?

Choosing the right automotive parts manufacturer is crucial for OEMs and automotive companies seeking quality, reliability, and cost-efficiency. Here are some reasons why Aceforge Pvt Ltd stands out among automotive parts manufacturers in India:

Proven Track Record: With a solid history of successful projects and satisfied clients, Aceforge has built a reputation for excellence in automotive parts manufacturing.

Global Reach: Aceforge caters to both the domestic and international markets, serving leading automotive brands across North America, Europe, Asia, and Africa. The company's ability to meet global standards and deliver consistent quality has earned it a place among the top automotive parts exporters from India.

Adaptability to Emerging Trends: Aceforge is quick to adapt to emerging trends, such as the growing demand for electric vehicles (EVs) and autonomous driving technologies. The company is already working on developing parts that meet the unique requirements of these new-age vehicles.

Strong Partnerships: Aceforge believes in fostering strong, long-term partnerships with its clients. By working closely with customers, the company ensures that it provides tailored solutions that meet their specific needs and contribute to their growth.

The Future of Automotive Parts Manufacturing at Aceforge Pvt Ltd

The automotive industry is undergoing a transformation driven by advancements in technology, sustainability, and changing consumer preferences. Aceforge Pvt Ltd is well-positioned to thrive in this evolving landscape, with plans to expand its product portfolio, enhance its manufacturing capabilities, and explore new markets. The company's commitment to innovation, quality, and customer satisfaction ensures that it remains at the forefront of the automotive parts manufacturing industry.

As India continues to rise as a global hub for automotive parts manufacturing, companies like Aceforge Pvt Ltd will play a critical role in driving this growth. With a strong foundation built on quality, innovation, and sustainability, Aceforge is set to shape the future of the automotive industry in India and beyond.

Conclusion

In the competitive world of automotive parts manufacturing, Aceforge Pvt Ltd stands out as a leader in delivering high-quality, reliable, and innovative automotive components. With its advanced manufacturing capabilities, customer-focused approach, and commitment to excellence, Aceforge is a trusted partner for automotive companies looking for top-notch solutions. As the industry continues to evolve, Aceforge is ready to meet the challenges and opportunities ahead, contributing to the growth and success of its customers worldwide.

[snehalg123]

Automotive Gudgeon Pin Market 2024 Growth, Survey, Analysis, Share, Company Profiles And Forecast By 2033

 A gudgeon pin is a small metal pin that is used to connect the piston to the connecting rod in an internal combustion engine. The gudgeon pin is also known as the wrist pin or piston pin. The gudgeon pin is located in the small end of the connecting rod and is usually a press fit into the piston. The gudgeon pin is what allows the piston to rotate within the cylinder. The gudgeon pin is also responsible for transferring the force from the piston to the connecting rod.

To Know More: https://www.globalinsightservices.com/reports/automotive-gudgeon-pin-market/?utm_id=Snehalkast

Market Outlook

The automotive industry is constantly evolving and so are the technologies used within it.

One of the key trends in gudgeon pin technology is the move towards lighter materials. This is being driven by the need to reduce fuel consumption and emissions.

Another key trend is the use of coatings to improve the performance of the gudgeon pin. These coatings can reduce friction and improve heat resistance. They can also protect the pin from corrosion and wear.

The final trend is the move towards more sophisticated manufacturing processes. This is necessary to produce gudgeon pins with the required level of precision.

The Automotive Gudgeon Pin market is growing owing to the rising demand for passenger cars and commercial vehicles.

Request Sample: https://www.globalinsightservices.com/request-sample/GIS22446/?utm_id=Snehalkast

Major Players

The global automotive gudgeon pin market includes players such as Federal Morgul, Mahle GmbH, Shriram Pistons & Rings Ltd., Aisin Seiki Co Ltd, Rheinmetall Automotive AG, Ming Shun Industrial Co. Ltd., Elgin Industries, Samkrg, KSPG, Arias Pistons, and others.

[researchrealmblog]

Automotive Piston Market is Driven by Strict Regulations to Decrease GHG Emissions

The automotive piston market was USD 4,199.2 million in 2023, and it will increase to USD 5,806.1 million, advancing at a 4.8% compound annual growth rate, by 2030.

The need for automotive pistons is rising because the middle-class population can now easily buy cars owing to its increasing disposable salary as well as urbanization in developing nations.

Moreover, governments across the globe have implemented strict rules to decrease greenhouse gas emissions, in reply to the rising environmental worries.

As a result, vehicle manufacturers are now utilizing cleaner as well as more fuel-effective engines to comply with these regulations. New piston materials and designs are necessary to attain these goals, as they can improve combustion effectiveness and decrease engine friction.

The aluminum category, based on material, is a significant contributor, because of the lightweight character of pistons produced from this material than those produced from steel and cast iron. This aids in engine weight reduction, which is key for improving performance as well as fuel economy.

The commercial vehicles category, based on vehicles, accounted for a significant share in 2023, of 65%, and it will further advance at approximately 4.5% CAGR, during this decade. The need for commercial vehicles has significantly expanded over the years because of the speedy trade globalization and rising e-commerce activities.

The thermal barrier category, based on coating, is leading the automotive piston market, as thermal barrier coating offers a solution for many issues associated with engine durability and performance.

The flat-top category, on the basis of shape, will advance rapidly in the coming years, primarily because of its tinnier surface area. This led to less carbon formation, which keeps the engine clean and avoids knocking. Moreover, their enhanced compression ratio and reduced combustion chamber volume enhance combustion productivity.

Furthermore, their enhanced thermal productivity results from less heat being wasted through the cylinder walls. In addition, flat-top pistons comprise thicker crowns, which improve the firmness in high-performance engines.

APAC was the largest contributor to the industry in 2023, with over 40% share, and it will further advance at approximately 5.5% compound annual growth rate, in the years to come. The regional industry is driven by the expansive automotive sector of China.

Furthermore, with their increasing vehicle sales and production, South Korea and India are also major contributors to the APAC industry. This is because such factors consistently boost the need for these automobiles’ components among aftermarket entities and OEMs.

It is because of the strict policies for reducing greenhouse gas emissions and the move towards direct-injection gasoline engines, the automotive piston industry will continuously progress in the coming years.

Source: P&S Intelligence

[arrowautomotive]

Revving Up Innovation: A Deep Dive into the World of Automotive Component Manufacturers

In the high-octane world of automobiles, the spotlight often falls on the sleek designs, powerful engines, and cutting-edge tech features of the cars themselves. However, the unsung heroes behind these automotive marvels are the automotive component manufacturers. These industry powerhouses are the driving force behind every piston's power, every gear's grind, and every microchip's memory. In this article, we'll shift gears to give these manufacturers their well-deserved recognition, exploring their vital role, innovative approaches, and the challenges they navigate in today's ever-evolving automotive landscape. Buckle up and join us as we journey into the heart of automotive innovation.

Key Players in the Industry

Leading the pack in the automotive component manufacturing industry are global giants like Bosch, Denso, and Magna. These companies hold significant market shares, thanks to their innovative products and strong global networks.

Innovations and Developments

The automotive component manufacturing industry is constantly evolving, with companies pushing the boundaries of technology and engineering. Innovations such as lightweight materials for improved fuel efficiency, advanced sensors for autonomous driving, and cutting-edge battery technology for electric vehicles are transforming the landscape of automotive components.

Challenges in the Industry

Despite the innovations, the industry faces challenges such as cost reduction, quality control, and environmental considerations. As companies strive to produce components that are affordable, reliable, and environmentally friendly, they must navigate the complex, often competing demands of consumers, governmental regulations, and shareholder expectations.

Impact of the COVID-19 Pandemic

The COVID-19 pandemic has undeniably affected the automotive component manufacturing industry, with disruptions to supply chains and decreases in consumer demand. However, manufacturers have demonstrated resilience, implementing new strategies to adapt to these challenges, such as the use of digital technology for remote work, and the reconfiguration of manufacturing lines to produce medical equipment.

Outlook on the Future

Looking ahead, the automotive component manufacturing industry is poised for further growth and transformation. With advancements in areas like electric vehicles, autonomous driving, and connected cars, the demand for sophisticated, high-quality components will only increase. Manufacturers that can leverage these trends and continue to innovate will be well-positioned for success.

Conclusion

Automotive component manufacturers stand at the crossroads of immense challenges and significant opportunities. The tumult of upheavals, including shifting consumer demands, stringent regulatory norms, and of course, the global pandemic, has tested the resilience of the industry. However, the advent of electric vehicles, autonomous driving, and connected car technologies present new avenues for growth and innovation. By embracing these trends and continually pushing the boundaries of what's possible, automotive component manufacturers can chart a path towards sustainable success in a rapidly evolving landscape.

To stay ahead in the fast-evolving automotive industry, it's crucial to partner with a forward-thinking automotive component manufacturer. Embrace the future today and ensure your company's sustainable success by aligning yourself with an innovative partner in the automotive component manufacturing sector. Don't just adapt - lead the change in the automotive world. Contact us today to learn more about our comprehensive solutions and expertise.

[rpmtrish]

Racing & Performance Holdings Announces Appointment of Mark Finnie as CEO

Racing & Performance Holdings is pleased to announce the appointment of Mark Finnie, a seasoned automotive industry veteran, as the new Chief Executive Officer (CEO) of the organization. This strategic move is part of R&P’s vision to implement a new organizational design aimed at capitalizing on growth opportunities within our performance brands. The realignment is strategically positioned to enhance the company’s ability to serve the performance aftermarket, reinforcing our commitment to excellence. Mark Finnie brings a wealth of experience to his new role, with a track record of success in various leadership positions within the automotive industry. His notable achievements include serving as a Division President for Motorsport Aftermarket Group for both Vance & Hines and Performance Machine. President and CEO of Pertronix Inc, Founder of Forge-Tec Wheels & Accessories and as Vice President of Weld Racing. Throughout his professional journey, Mark has demonstrated exceptional leadership skills that have consistently improved business productivity and revenue. “As Racing and Performance continues its growth through innovative products and strategic acquisitions, the addition of Mark Finnie to our business comes at a perfect time. Mark is familiar with working with multiple companies and different channels of distribution, and we are excited to have him join our organization.”— Will Morris, Managing Director of Taglich Private Equity, LLC (“TPE”) Beyond his impressive professional career, Mark’s passion for and involvement in automotive performance traces back to his early years. Growing up in Southern California, surrounded by the vibrant racing scene and a multitude of performance manufacturing, Mark developed a deep-rooted connection to the industry. “I am excited to join Race & Performance Holdings and look forward to working closely with the operation and R&P teams at our brands as we look to grow and strengthen our position in the aftermarket performance industry. We look to further enhancing Scat, AFR, Vortech Superchargers, RaceTec Pistons and PROCAR Seating leading positions in the market by leveraging the company’s engineering expertise, coupled with our team’s automotive aftermarket experience and network.” — Mark Finnie, CEO Racing & Performance Holdings is confident that Mark’s extensive experience and dedication to automotive performance will play a pivotal role in driving the company’s success in the dynamic and competitive aftermarket sector.   Read the full article

[david843346]

Automotive Cylinder Liner Market Global Trends, Share, Growth, Opportunity And Forecast-2023

Global automotive cylinder liner market is expected to flourish at a significant CAGR of 4.2% during the forecast period. Moreover, the global automotive cylinder liner market is expected to garner USD 5,761.25 Million by the end of 2027.

The global automotive cylinder liner market is segmented into material type such as stainless steel cylinder liner, cast iron cylinder liner, titanium alloy cylinder liner, aluminum alloy cylinder liner and other. Among these segments, titanium alloy cylinder liner segment is expected to occupy top position in overall automotive cylinder liner market during the forecast period. Moreover, factor such as growing automotive production, increasing number of heavy trucks and growing demand for construction equipment are driving the market for automotive cylinder liners. Nowadays, many manufacturers are replacing cast iron with aluminum alloys and other material such as steel and titanium alloys for lighter engines in order to gain better fuel efficiency. This factor is anticipated to intensify the growth of the automotive cylinder liner market in the years ahead.

Europe automotive cylinder liner market is projected to hold a significant market share in terms of value in the global automotive cylinder liner market over the forecast period, exhibiting a CAGR of 2.1% over the forecast period. North America automotive cylinder liner market is anticipated to showcase significant growth during the forecast period. Moreover, Latin America is anticipated to grow at modest CAGR during the forecast period. Further, positive heavy vehicle and gasoline vehicle growth coupled with growing automotive market in the region is anticipated to drive the growth of the automotive cylinder liner market in Latin America.

Download Sample of This Strategic Report @ https://www.researchnester.com/sample-request-926

Cylinder Liner Automotive Engines

Increasing automotive production is the major growth driver of global automotive cylinder liner market. Further, automotive production is expected to increase on the account of rising demand. This factor is envisioned to bolster the growth of automotive cylinder liner market.

Automotive Aftermarket Cylinder Liner Industry Reflects Significant Opportunities

Rapid growth in automotive vehicle size on the road is creating noteworthy after market prospects for automotive cylinder liner market. On the other hand, the heavy duty automotive cylinder liner segment is estimated to display a substantial growth rate throughout the forecast period owing to factors like increasing demand for heavy trucks and light commercial vehicle.

High cost of premium automotive cylinder liner can dampen the market of automotive cylinder liner. Moreover, rapid change in technology of heavy vehicle and luxurious car may diminish the demand for cylinder liner. 

The report titled “Automotive Cylinder liner Market Global Demand Analysis & Opportunity Outlook 2027” delivers detailed overview of the global automotive cylinder liner market in terms of market segmentation by material type, by vehicle type, by cylinder line type, by cylinder liner type, by sales channel, by applications and by region.

Further, for the in-depth analysis, the report encompasses the industry growth drivers, restraints, supply and demand risk, market attractiveness, BPS analysis and Porter’s five force model.

This report also provides the existing competitive scenario of some of the key players of the global automotive engine bearings market which includes company profiling of Mahle GmbH, Federal-Mogul LLC, GKN PLC, Westwood Cylinder Liners, Nippon Piston Rings Co. Ltd., TPR Co. Ltd., ZYNP Corporation, Liners India Limited, Melling Cylinder Sleeves, Cooper Corp, Dart on International, Inc., India Pistons Ltd. The profiling enfolds key information of the companies which encompasses business overview, products and services, key financials and recent news and developments. On the whole, the report depicts detailed overview of the global automotive engine bearings market that will help industry consultants, equipment manufacturers, existing players searching for expansion opportunities, new players searching possibilities and other stakeholders to align their market centric strategies according to the ongoing and expected trends in the future.

Curious about this latest version of report? Obtain Report Details @ https://www.researchnester.com/reports/automotive-cylinder-liner-market/926

[poonamcmi]

Global Video Borescopes Market Is Estimated To Witness High Growth Owing To Rising Demand for Non-destructive Testing Equipment

The global Video Borescopes Market is estimated to be valued at US $814.16 million in 2023 and is expected to exhibit a CAGR of 6.5% over the forecast period 2023-2030, as highlighted in a new report published by Coherent Market Insights. Market Overview: Video borescopes are optical devices used for non-destructive testing in industries such as automotive, aerospace, power generation, and manufacturing. These devices allow professionals to inspect and analyze the internal components of machines and structures without dismantling them. With their compact design and high-quality imaging capabilities, video borescopes offer numerous advantages over traditional inspection methods, such as reducing downtime, preventing unnecessary repairs, and ensuring the safety of workers. Market key trends: One key trend driving the growth of the video borescopes market is the increasing demand for advanced non-destructive testing equipment. As industries focus on improving operational efficiency and minimizing maintenance costs, there is a growing need for inspection tools that can provide accurate and reliable results without causing any disruption to the production process. Video borescopes fulfill this requirement by allowing real-time inspection of hard-to-reach areas, helping companies identify potential issues before they escalate into major problems. For example, in the automotive industry, video borescopes are used to analyze engine cylinders, valves, and pistons, ensuring optimal performance and reducing the risk of mechanical failures. PEST Analysis: - Political: Government regulations regarding safety standards in industries such as aerospace and manufacturing drive the adoption of video borescopes. - Economic: The increasing investments in infrastructure development and manufacturing industries across emerging economies contribute to market growth. - Social: The focus on worker safety and the need for accurate inspection tools create a favorable environment for video borescope adoption. - Technological: Advances in imaging technology, such as high-definition cameras and wireless connectivity, enhance the capabilities of video borescopes and widen their scope of applications. Key Takeaways: - The global Video Borescopes Market Share is expected to witness high growth, exhibiting a CAGR of 6.5% over the forecast period, due to increasing demand for non-destructive testing equipment. - North America is expected to dominate the market, owing to the presence of key players and the widespread adoption of video borescopes in industries such as aerospace and automotive. - Key players operating in the global video borescopes market include Olympus Corporation, GE Inspection Technologies (now part of Baker Hughes), Karl Storz GmbH & Co. KG, SKF Group, FLIR Systems Inc., Yateks Corporation, PCE Instruments, Vizaar Industrial Imaging AG, VJ Technologies Inc., Gradient Lens Corporation, Medit Inc., RF System Lab (now owned by Olympus Corporation), Coantec Automation Technology Co. Ltd.,

[esgdatainrate]

Pneumatic Cylinder Outlook, Geographical Segmentation, Industry Size & Share, Comprehensive Analysis to 2031

The global pneumatic cylinder market size was valued at $13,375.8 million in 2020, and is projected to reach $23,850.4 million by 2030, registering a CAGR of 5.8% from 2021 to 2030. Pneumatic cylinder, also known as air cylinder, is a mechanical device that generates force in a linear motion using air pressure. These cylinders are similar to a car piston, instead of a fuel explosion, they are propelled by an input of compressed gas. Piston returns to its starting position once each stroke is completed.

Demand for pneumatic cylinders is on the rise at an exponential pace, owing to increase in number of manufacturing and other sectors, which is expected to propel the pneumatic cylinder market. Furthermore, incorporation of IoT into pneumatic cylinders is expected to boost the pneumatic cylinder market in near future. Pneumatic cylinder is faster, stronger, and uses less energy to perform an operation. One of the main drivers of the worldwide pneumatic cylinder market is the rising need for high-speed or forced mechanical devices in a variety of industrial applications.

Furthermore, the major key players are focusing on manufacturing faster and stronger motion pneumatic cylinder. For instance, in My 2021, Festo SE & Co. KG has launched fast motion Terminal VTEM Pneumatics. VTEM is energy efficient and quickly activates motion on both the side by increasing flexibility during production process. The VTEM speeds up the production process and makes filling nitrogen or other gases into containers like bottles more profitable and cost-effective. Therefore, such factors are expected to provide significant growth in market during the forecast period.

Pneumatic cylinders are widely used for motion control, which is frequently utilized in industrial machines. Pneumatic cylinders are intended to go in two directions on a defined route and have a set distance that they may travel in either direction before stopping. Various key players are focusing on manufacturing such pneumatic cylinders, which increase performance and reduce emissions in gas-power industries. For instance, in march 2021, Eaton introduced its next-generation sodium-filled head hollow valves, which improve gas-powered engine fuel efficiency, emissions, and performance. Valves have one-of-a-kind design that reduces cylinder chamber temperature while reducing engine knock. Such products with advanced technology are expected to provide significant pneumatic cylinder market during forecast period.

The pneumatic cylinder market is segmented on the basis of product type, motion, end-user industry, and region. By product type, the market is divided into single-acting cylinder and double-acting cylinder. By motion, it is divided into linear and rotary. By end user industry, it is divided into oil & gas, paper & pulp, mining, water and wastewater, foods & beverages, energy & power, automotive, and others. Region wise, the pneumatic cylinder market analysis is conducted across North America (the U.S., Canada, and Mexico), Europe (Germany, France, UK, Italy, and Rest of Europe), Asia-Pacific (China, India, Japan, South Korea, Singapore, Malaysia, Thailand, Indonesia, and rest of Asia-Pacific), and LAMEA (Latin America, the Middle East, and Africa).

Competition Analysis

Key companies profiled in the pneumatic cylinder market report include Airtac International Group, Camozzi Group S.P.A., DL Pneumatics, Emerson Electric Co., Festo SE & Co. KG, ABB Ltd., Honeywell International INC., Parker Hannifin Corporation, Eaton Corporation PLC, and Rotex Automation.

Full Report With TOC:-https://www.alliedmarketresearch.com/pneumatic-cylinder-market-A12547

[gorepoonam]

Drive by Wire Market Analysis by Future Demand, Top Players, Size, Share

Global Drive by Wire Market research report 2020 offers in-depth assessment of revenue analysis by Future Growth, Top Players, Size, Share, Opportunities, Revenue and Growth Rate Through 2027 Evaluation is provided for global markets, including development trends, competitive landscape evaluation, and key region's development standing. Moreover, this report also helps you to understand factors driving or inhibiting the market growth along with each submarket with respect to individual growth trend and their contribution to the market

Drive by Wire Market Regional Analysis:

This study provides an overview of the Global Drive by Wire Market, tracking five market segments across four geographic regions. The report studies key players, providing a five-year annual trend analysis that highlights market size, volume and share for North America, Europe, Asia Pacific (APAC) and Rest of the World (ROW). The report also provides a forecast, focusing on the market opportunities for the next five years for each region. The scope of the study segments the Global Drive by Wire Market by its Type, Applications, End User and Region.

Competitive Analysis:

The Drive by Wire Market report examines competitive scenario by analysing key players in the market. The company profiling of leading market players is included this report with Porter's five forces analysis and Value Chain analysis. Further, the strategies exercised by the companies for expansion of business through mergers, acquisitions, and other business development measures are discussed in the report. The financial parameters which are assessed include the sales, profits and the overall revenue generated by the key players of Market.

Key Offerings: • Market Size & Forecast by Revenue | 2027 • Market Dynamics - Leading trends, growth drivers, restraints, and investment opportunities • Market Segmentation - A detailed analysis by product, types, end-user, applications, segments, and geography • Competitive Landscape - Top key vendors and other prominent vendors.

Key Manufacturers Covered in This Report:

Major players operating in the global automotive daytime running light market include Valeo SA, KOITO MANUFACTURING CO., LTD., TANLEY ELECTRIC CO., LTD., Marelli Holdings Co., Ltd., HELLA GmbH & Co. KGaA, ZIZALA Lichtsysteme, and ICHIKOH INDUSTRIES, LTD. among others.

Contents

login

Executive Summary

Market Dynamics

Basic knowledge

Qualitative Analysis – Impact of COVID-19

Global Drive by Wire Market Analysis (Billion USD), Insights & Forecast, 2018-2020

Research Scope

Market Segmentation

Research Methodology

Definitions and Assumptions

Market drivers

Market Restrictions

Market Opportunities

Important Emerging Trends

Major Developments: Mergers, Acquisitions, Partnerships etc.

Latest Technological Developments

Editor Landscape

Porter's Five Forces Analysis

Impact of COVID-19 on Drive by Wire Market

Steps Taken by Government to Overcome Impact

Major Developments in the Industry in Response to COVID-19

Potential Opportunities and Challenges Due to the COVID-19 Pandemic

Key Findings / Summary

Market Analysis, Opinions and Forecast - By Fuel Type

Market Analysis, Insights & Forecast - By Technology

Market Analysis, Insights & Forecast - By App

Market Analysis, Opinions & Forecast - By Region

Natural gas

Coal

biomass

Others

Combined Cycle

steam turbine

gas turbine

Piston engine

Others

Vehicles

residential

Commercial and Industrial

North America

Europe

Asia Pacific

Latin America

Middle East and Africa

About Us:

Fortune Business Insights™ delivers accurate data and innovative corporate analysis, helping organizations of all sizes make appropriate decisions. We tailor novel solutions for our clients, assisting them to address various challenges distinct to their businesses. Our aim is to empower them with holistic market intelligence, providing a granular overview of the market they are operating in.

Contact Us:

Fortune Business Insights™ Pvt. Ltd.

US :+1 424 253 0390

UK : +44 2071 939123

APAC : +91 744 740 1245

Email: sales@fortunebusinessinsights.com

[chemicalsmaterialsnews]

Sustainable Solutions for Rubber Recycling: Exploring the Recycled Elastomers Market

The recycled elastomers market was USD 8,921.8 million in 2022, and it will touch USD 19,781.2 million, advancing at a 10.5% compound annual growth rate, by 2030.

  The growth of the industry is mainly credited to the strict government rules, rising consciousness of recycling benefits, and increasing adoption of elastomers in numerous industries for various purposes.

Thermosets are implemented in the production of numerous products for instance electrical housings, tires, circuit brakes, cell tower tops, disc brake pistons, and insulators.

To receive free sample pages of this report@ https://www.psmarketresearch.com/market-analysis/recycled-elastomers-market/report-sample

In 2022, the automotive category, based on application, held the largest recycled elastomers market revenue share, of more than 30%, and it will remain the largest in the years to come. This is mainly because of the increasing adoption of elastomers in manufacturing components that necessitate tolerance to high-temperature, for instance, engine mounts, tires, gaskets, and bushes.

China led the recycled elastomers industry in APAC. This is because of the increasing population, mounting consumer goods consumption, rising requirement for commercial and passenger vehicles, increased industrial output, and high import and export in the nation. Therefore, the increasing requirement for elastomers is driving companies to implement the approach of recycling to meet the requirement in the country.

In 2022, Europe held a significant share of the industry, approximately 25%, and it will maintain its position in the years to come. This is because of the existence of well-established industries in the region such as medical, consumer goods, and automotive

North America will advance at a significant compound annual growth rate in the years to come. This is since the consumer goods and automotive industries are generating a high requirement for recycled elastomers in the region. Hence, with the increasing consciousness of recycling benefits, mounting adoption of elastomers in numerous industries, and strict government regulation, the recycled elastomers industry will continue to advance in the years to come.

[aceforge12-blog]

Aceforge Pvt Ltd: A Leader Among Automotive Parts Manufacturers in India

In the bustling landscape of India's automotive industry, Aceforge Pvt Ltd stands out as a premier manufacturer of high-quality automotive parts. Renowned for its commitment to excellence, innovation, and customer satisfaction, Aceforge has established itself as a key player in the Indian automotive sector. With a rich history of delivering superior products and solutions, Aceforge is shaping the future of automotive manufacturing in India and beyond.

Excellence in Manufacturing

Aceforge's reputation for excellence is built on its state-of-the-art manufacturing facilities, which are equipped with cutting-edge technology and operated by a team of highly skilled professionals. The company's commitment to quality is evident in every aspect of its operations, from raw material sourcing to final product inspection. Key manufacturing capabilities at Aceforge include:

Precision Engineering: Utilizing advanced CNC machining, forging, and casting techniques to produce components with exceptional accuracy and durability.

Innovative Processes: Implementing the latest in heat treatment and surface finishing technologies to enhance the performance and longevity of automotive parts.

Stringent Quality Control: Employing rigorous testing and inspection protocols to ensure every product meets or exceeds industry standards.

Diverse Product Portfolio

Aceforge offers a comprehensive range of automotive parts designed to meet the diverse needs of vehicle manufacturers. Their extensive product portfolio includes:

Engine Components: High-performance pistons, valves, crankshafts, and camshafts that optimize engine efficiency and power.

Transmission Parts: Robust gears, shafts, and clutch assemblies designed for smooth and reliable power transfer.

Suspension and Steering Components: Precision-engineered control arms, tie rods, and steering knuckles that enhance vehicle handling and stability.

Brake Systems: High-quality brake discs, calipers, and pads that ensure superior braking performance and safety.

Electrical and Electronic Components: Advanced sensors, connectors, and wiring harnesses essential for modern vehicle electronics.

Commitment to Innovation

At Aceforge, innovation is at the heart of everything they do. By fostering a culture of continuous improvement, Aceforge is able to introduce new and improved products that meet the evolving demands of the automotive market. This commitment to innovation extends to all aspects of their operations, from product design and manufacturing processes to customer service and support.

Sustainable Manufacturing Practices

Aceforge is dedicated to sustainability and environmental responsibility. The company implements eco-friendly practices across its operations, including energy-efficient manufacturing processes, waste reduction initiatives, and responsible resource management. By prioritizing sustainability, Aceforge not only minimizes its environmental footprint but also contributes to the broader goals of creating a more sustainable automotive industry.

Strategic Partnerships and Customer Focus

Aceforge has built strong relationships with leading automotive manufacturers in India and around the world. By working closely with OEMs (Original Equipment Manufacturers), Aceforge ensures that its products are seamlessly integrated into the final assembly process, enhancing overall vehicle performance and reliability. The company's customer-centric approach is reflected in its ability to provide customized solutions that meet specific client requirements, ensuring complete customer satisfaction.

Future Vision

Looking ahead, Aceforge Pvt Ltd is poised for continued growth and success. As the automotive industry undergoes significant transformations driven by electrification, connectivity, and automation, Aceforge is ready to embrace these changes and lead the way with innovative solutions. By staying true to its core values of quality, innovation, and customer focus, Aceforge is set to remain at the forefront of the automotive parts manufacturing industry in India.

In conclusion, Aceforge Pvt Ltd exemplifies the best of Indian automotive parts manufacturing through its dedication to excellence, innovation, and sustainability. With a comprehensive product range, advanced manufacturing capabilities, and a strong focus on customer satisfaction, Aceforge is a trusted partner for automotive manufacturers looking for reliable and high-quality components.

[researchvishal]

Automotive Cylinder Liner Market Segmentation Application, Technology & Analysis Research Report To 2027

The global automotive cylinder liner market growth is predicted to reach a valuation of US$ 5,627.9 Million by 2027, with sales growing at a stagnant CAGR of 3.5% from 2022 to 2027. Scaling up from a value of US$ 4,573.1 Million in 2021, the target market is expected to reach an estimated US$ 4,741.1 Million in 2022.

Key Takeaways:

APEJ region is anticipated to exhibit substantial growth over the assessment period, accounting for over 42.3% of the market share.

India, China, and ASEAN countries are major contributors to the market's growth in APEJ region.

Preference for hybrid liner over conventional alloy positively influences the market prospects.

The automotive cylinder liner market in the U.S. will likely surpass a value of US$ 715.7 Mn by the end of 2022.

Japan's automotive cylinder liner market will be valued at US$ 445.2 Mn in 2022.

Cast iron material type will register the highest demand.

The liner type segment is set to grow at a CAGR of 2.9%.

For more information: https://www.futuremarketinsights.com/reports/automotive-cylinder-liner-market

Competitive Landscape 

Nippon Piston Rings Co. Ltd, Federal-Mogul LLC, TPR Co. Ltd., ZYNP Corporation, Liners India Limited, Daido Kogyo Co. Ltd., Melling Cylinder Sleeves, Cooper Corp, Darton International, Inc, India Pistons Ltd, Mahle GmbH, GKN PLC, Bryan Automotive, Metallic Auto Liners Pvt. Ltd, Kusalava International Ltd., Westwood Cylinder Liner Ltd., Aichi Machine Industry Co. Ltd, Bergmann Automotive GmbH, PT Pakarti Riken Indonesia, Cnflap Engine Parts (GZ) Ltd., and Advanced Sleeve among others are some of the major players in the automotive cylinder liner market profiled in the full version of the report.

Leading market players are focusing on acquisition and expansion strategies to enhance their supply of automotive components. Some of the other players are concentrating on increasing the efficiency of automotive cylinder liner to gain a competitive advantage.

Elevated preference for passenger and commercial vehicles, primarily in urban areas, along with the availability of advanced and wide-ranging cylinder liners fuel the growth of the automotive cylinder liner market. The growing population in urban cities coupled with a high demand for lightweight vehicles will further aid the growth of the target market during the forecast period.

The growing car industry which is driven by a demand for passenger cars coupled with increasing purchasing powers bodes well for the automotive cylinder liner market. The overall advancement of the automotive sector as well as a high demand for automotive components also contribute to the growth of the automotive cylinder market.

Request a sample report: https://www.futuremarketinsights.com/reports/sample/rep-gb-3387

An escalation in the popularity of light and passenger commercial vehicles also supplements to the growing demand for automotive cylinder liner. Moreover, a shift from the conventional alloy to hybrid liner is one of the prime factors influencing the market.

More and more manufacturers are inclined to increase the production of hybrid liners, because of their better functionality and efficiency. Again, CAFE and EPA standards have become fairly strict and impose heavy fines on automakers that do not reach the standard mpg (miles per gallon) criteria.

This is expected to positively impact the target market as it compels automobile manufacturers to produce better automobiles with improved fuel efficiency and fewer emissions. The use of effective alloys with increased tensile strength in automotive components will likely support the growth of the automotive cylinder liner market over the forecast period.

"Heightened demand for passenger cars and lightweight commercial vehicles propel the global growth of the automotive cylinder liner market over the forecast period," says an FMI analyst. 

More Insights into Automotive Cylinder Liner Market Report

In its latest report, FMI offers an unbiased analysis of the global automotive cylinder liner market, providing historical data from 2012 to 2021 and forecast statistics for 2022 to 2032. According to the latest FMI reports, based on segmentation, the liner type segment will expand at a 2.9% CAGR by volume.

In terms of volume, the dry liners segment will register high demand in light and passenger commercial vehicles while wet liners will witness high installation rates. The material type segment will grow at a CAGR of 2.8% during the forecast period. Based on region, the Asia Pacific Excluding Japan (APEJ) region is expected to exhibit substantial growth in the target market.

[vicky8588]

TAPPET MARKET

MARKET OVERVIEW

"Report on Global Tappet analyses the market size, shares, recent trends, competitive intelligence, and future market outlook. Tappet usage in combustion engines is on the rise. Demand from Passenger and Commercial Automotives in Asia Pacific is spiking. Competitive rivalry intensifies with Federal-Mogul, Competition Cams, Otics Corporation and others operating in the market."

Tappets are the essential component of the internal combustion engine, which converts the camshaft's rotating motion into linear motion of the valves. The tappet is the mechanical part that helps to reciprocate the part of the valve gear in beam engines to transmit intermittent motion. The tappets can be produced with the latest technologies with high productive CNC and SPM machines.

To Get a Free Sample Click here

TAPPET MARKET TRENDS AND DYNAMICS

The market is driven by the rising sale of passengers and commercial vehicles due to increased disposable income and a surge in global populations. According to the International Organization of Motor Vehicle Manufacturers, in 2019, the commercial and passenger vehicle sale was registered to around 91358457 numbers of units worldwide. As the tappets are the essential component of the automobile engine requires adjusting the air-fuel mixture at the camshaft.

There is a rise in the adoption of advanced technology like laser-based processes to manufacture the engine components for automobiles and heavy vehicle displays. For instance, on 30th August 2018, Federal-Mogul Powertrain had developed laser processes for the large bore of the future piston rings that provide higher wear resistance. The techniques are eco-friendly galvanic coatings developed with new surface treatments for future engine and fuel developments in the industrial and marine sectors.

TAPPET MARKET SEGMENTATION ANALYSIS

The global tappet market is segmented based on product type, applications, and region.

In terms of product type, the global tappet market is bifurcated into flat and roller. Among these, the flat segment has the highest market share in 2019 due to the increasing demand for the vehicles to launch advanced technology for a smoother operating engine at a lower cost. For instance, in 2019, SAC Indian Company developed the tappet with an increased machining capacity of Tappet (cam followers) of around 8.40 million per annum, enhanced from 7.2 million per Annum with the latest metrology and metallurgy lab to measure all the critical parameters of the Tappets.

Similarly, the roller segment is also growing faster due to raising the global demand for the advanced technology-based fuel saver and wear-resistant cam and follower worldwide.

Depending on the vehicle type, the global tappet market is divided into passenger vehicles, commercial vehicles, etc. Among these, the commercial vehicles segment had the highest share in 2019. This is primarily due to the rising sale and production of commercial vehicles, which has generated a huge demand for the tappet used in engine manufacturing. According to the International Organization of Motor Vehicle Manufacturers, in 2019, the numbers of commercial vehicles produced were more than 27016764 numbers of units.

Similarly, passenger vehicle segments are also growing faster due to the rising sale of passenger vehicles worldwide. According to the International Organization of Motor Vehicle Manufacturers (OICA), in 2019, the global passenger vehicle sales have been registered to around 64341693 numbers of units. This propels the segmental growth for the tappet market.

Depending upon the Engine size, the global tappet market is bifurcated into <4 cylinders, 4-6 cylinders, and >6 cylinders. Among these 4-6 cylinders, this is primarily due to the rising demand for heavy trucks, coaches, buses with a surge in the global population.

Similarly, <4 cylinders and >6 cylinders are also growing faster due to increasing the sale of passenger cars, two-wheelers, and three-wheelers around the globe.

Depending upon the distribution channel, the global tappet market is bifurcated into aftermarket and OEMs. Among these OEMs, the segment has the highest market share due to increasing the demand for the tappet by the original vehicle manufacturers with the growing adoption of advanced technology. For instance, on 30th October 2018, the GM Genuine Original Equipment Manufacturer of the automotive Parts and AC Delco has been expanded the product portfolios of the automotive components to meet growing customer demand.

Similarly, the aftermarket segment is also growing faster due to distributors, wholesalers shops, and the rising trend of custom vehicles worldwide.

GLOBAL TAPPET MARKET GEOGRAPHICAL SHARE

By region, the global Tappet market is segmented into North America, South America, Europe, Asia-Pacific, Middle-East, and Africa. Among all of the regions, Asia Pacific is the dominant region for the global tappet market. It is expected to grow at the highest CAGR during the forecasted period due to leading manufacturing players with growing automotive sales and production, followed by the North America region. According to OICA, in 2019, there were around 44 million vehicles sold in this region, from which China remains the leading market with 28.08 million sales. This propels the tappet market's demand, which is the engine's core part of the vehicles' forecast period.

North America is also growing faster for the tappet market, owing to rising automotive sales with a surge in consumer spending. As per the OICA in 2019, around 25 million new vehicles have been registered in North America, followed by the Europe region. Similarly in the Europe region, the vehicle sale is rapidly growing due to rising consumer demand. For instance, in 2017, as per the International Transport of Clean Transportation (ICCT) report in the UK, more than 4.3 million new sport utility vehicles (SUV) have been registered. This has been propelled the demand for commercial and passenger vehicles, ultimately boost the tappet market.

TAPPET MARKET COMPANIES AND COMPETITIVE LANDSCAPE

The global Tappet market is highly competitive with the presence of several international and local markets. Product diversification, revenue generation, and opportunities intensify the market competition. Otics Corporation, Eaton, Schaeffler SKF, TRW, Federal-Mogul, NSK, Rane Engine Valve Limited,  AC Delco, Competition Cams, and Lunati are the leading market players with significant market share.

Companies are entering into collaborations, acquisitions, mergers, and licensing for increasing their market penetration. For instance, on 28th Nov 2018, Schaeffler Company has acquired Elmotec Statomat GmbH to enhance the production capabilities of leading manufacturers of production machinery for the high-volume.

About DataM Intelligence:

DataM Intelligence 4Market Research is a market intelligence platform that gives access to syndicated, customized reports and consulting to its clients in one place. As a firm with rich experience in research and consulting across multiple domains, we are a one-stop solution that will cater to the needs of clients in key business areas. DataM Intelligence has an online platform whose coverage includes industries such as chemicals and materials, agriculture, health care services, animal feed, and food & beverages, among others. Our platform has Insights on markets that uncover the latest market research data that are distinct from the competition. With coverage across 10 major industries in the marketplace research, DataM Intelligence benefits thousands of companies by helping them take their innovations early to the market by providing a complete view of the market with statistical forecasts. Our strategy-centric framework and value-added services will let individuals and corporates ease access and custom personalization to research and markets.

Contact Us:

For more information:

Sai Kiran

Sales Manager at DataM Intelligence

Email: info@datamintelligence.com

Tel: +1 877 441 4866

Website: www.datamintelligence.com

[severepeanutperfection]

Automotive Piston Rings Market: Enhancing Vehicle Performance and Efficiency with Advanced, High-Quality, and Durable Piston Ring Solutions

The global piston ring market is expected to experience rapid growth in the coming years due to an increase in demand for transportation vehicles. Piston rings are important parts of an engine, used to seal the combustion chamber and prevent excessive oil consumption or loss of compression. They are available in a variety of materials such as stainless steel, gray cast iron, ductile iron, nitrided steel and bronze alloy.

Request For Sample Copy @ https://www.persistencemarketresearch.com/samples/22015

Key players in this market include Federal-Mogul Corporation, Sinterflo International GmbH & Co KG, Delfingen Industries SA/NV, Goetze (India) Limited, MAHLE GmbH, KSPG AG, SKF AB, Freudenberg Group Japan Co., Ltd., Dana Holding Corporation and MELECTRONICS SRL.