#Circuit breakers laguna

[alpsmsienergyefficiency-blog]

ENERGY EFFICIENCY LUBE

The more there is friction on the rolling element of bearing; motor exerts more power thereby increase your energy consumption. Suitable and correct amount of lubricants feed into the bearing will lessen friction, reduces load (HP), and make the whole drive system more efficient.

Bearing failure is a major cause of equipment downtime in today‘s industrial environment, most often resulting from improper lubrication. Improper lubrication scenarios include the contamination of the lubricant by dust, dirt and moisture, inadequate amounts of lubricant applied to the bearing, and/or over-lubrication of the bearing.

Each bearing failure directly impacts the production cycle. While bearings can be expensive, replacement cost alone is often miniscule compared to lost production and the cost to repair the damage.

Fig 1 shown that 51% of motor failure is caused by bearings. This is our experience in the repair of motors.

According to a recent study as shown in Fig. 2, 15% is caused by insufficient lubrication; 5% liquid contamination; 20% solid contamination (grease container exposed to environment not properly covered or sealed).

Contamination is caused by foreign substances getting into bearing lubricants or cleaning solutions. These include dirt, abrasive grit, dust, steel chips from contaminated work areas and dirty hands or tools.

Why, in the age of technology, is this a problem? It is because many bearings are still lubricated manually. No matter how diligently a maintenance staff adheres to a lubrication schedule, it is a difficult task. Because employees are expected to manage multiple responsibilities in the lean environment of today‘s plants, it is common that proper lubrication is not considered a priority.

Solutions:

Use the appropriate type and     correct amount of lubricant, avoid grease loss, and follow appropriate     re-lubrication intervals.

Filter the lubricant using automatic     lubricators and clean work areas, tools, fixtures and hands to reduce the     risk of contamination.

Reference: http://www.slideshare.net/dmanney/why-electric-motors-fail       

Automatic Lubrication for Manufacturing Applications

ATS Electro-Lube manufactures self contained single-point and multi-point automatic lubrication products that provide effective, dependable lubrication for manufacturing equipment of all types. Our self-contained mechanical lubricators can deliver up to two full years of continuous lubrication, and can be installed almost anywhere—including remotely, as much as 30‘ from the lubrication point. Our devices are a safe, efficient alternative to daily manual lubrication.

We also offer a variety of accessories, including mounting brackets, control options and power options. ATS‘ motor-driven units, the ULTIMATE, TITAN, OILER and JACK series can all lubricate multiple points with a single unit via distribution blocks. Our TITAN, OILER and JACK units are refillable, for added convenience.

ATS‘ innovative auto lubers are ideal for bearing lubrication, engine lubrication, and any other machine lubrication needs your manufacturing processes may have. Our automatic mechanical lubricators deliver a reliable, consistent solution for any machinery that requires regular lubrication.

#Alignment, #VibrationAnalysis, #MotorEnergySavings, #MotorRepairs, #MotorRewinding, #Coolingtower, #EnergyefficiencyHVAC, #pumps, #blowers, #gearbox

http://alpsmsi.com/alps/energy-efficiency-lube/

[alpscranedrives-blog]

Pump Repair

Refurbishing pumps is one of our expertise. In the repair, we focus on improving pump efficiency thereby reduce energy cost.

#Alignment, #VibrationAnalysis, #MotorEnergySavings, #MotorRepairs, #MotorRewinding, #Coolingtower, #EnergyefficiencyHVAC, #pumps, #blowers, #gearbox   https://alpsmsi.com/alps/pump-repair/

[circuitbreakersdriver-blog]

ENERGY AUDIT

An energy audit is an inspection, survey and analysis of energy flows, for energy conservation in a building, process or system to reduce the amount of energy input into the system without negatively affecting the output(s). Reference:  https://en.wikipedia.org/wiki/Energy_audit

ALPS MSI offers to conduct free energy audit 2 – 5 rotating machines whose methodologies are in compliance to International Performance Measurement Verification Protocol (IPMVP). www.evo-world.org

NOTE: ECM – Energy Conservation Measure

ALPS MSI has the expertise in energy audit, engineering and project management by drive specialists with extensive experience in nearly all branches of industry. These services save time and minimize the project- related personnel needed in the company.

Our Procedures

1. Identifying potential energy savings

The energy requirements are determined and potential energy savings are identified:

Identification     of the existing energy consumption of the plants;

Representation     of the energy flow and possible savings potentials;M

Measurement     of the power and grid quality;

Analysis     of electric motors in terms of their workload and energy efficiency; and

Compilation     of energy costs to deter- mine the potential energy savings.

2. Evaluating the collected data

The identified areas of potential savings are evaluated using different methods to establish a solid foundation for decision-making:

Incorporation     of experience from similar plants through comparison with known     applications;

Calculation     of potential savings using SinaSave energy efficiency software;

Determination     of investment costs taking lifetime, amortization, and feasibility into     account ; and

Definition     of measures and proposed solutions.

3. Implementing the energy optimization measures

The suitable products and specific implementation measures are determined and carried out. Selection of suitable components:

Retrofit     and modernization of plant parts;

Provision     of order support;

Project     management and administration;

Engineering,     project planning, set up, modifications, assembly, installation, commissioning,     acceptance testing, and training; and

Review     of results after a specified period of time.

Benefits

Improved energy balance and production conditions over the long term

Efficient     energy use through the installation of state-of-the-art energy-saving     motors;

Optimized     energy use through retrofits on variable-speed drives;

Adaptation     of energy consumption to meet the specific requirements of the     application;

Less     grid demand for reactive power;

Improved     motor starting performance;

Lower     network load through fewer harmonics;

Less     wear and tear thanks to adjusted speeds;

Optimized     production conditions through lower maintenance requirements; and

#Alignment, #VibrationAnalysis, #MotorEnergySavings, #MotorRepairs, #MotorRewinding, #Coolingtower, #EnergyefficiencyHVAC, #pumps, #blowers, #gearbox

http://alpsmsi.com/alps/services/energy-audit/

[alpsindustrialcommunication-blog]

OVERVIEW

According to American Council for an Energy Efficient Economy (ACEEE), when utilities and other groups discuss ―energy efficiency as a resource,‖ they are defining efficiency as an energy resource capable of yielding energy and demand savings that can displace electricity generation from coal, natural gas, wind power, and other supply- side resources. Investments in energy efficiency and the resulting resource benefits are factored directly into utility energy resource decision making about investing in new resources and operating existing systems.

Defining efficiency as a resource and integrating it into utility decision making is especially critical because of the clear resource cost advantage of energy efficiency. Energy savings from customer energy efficiency programs are typically achieved at 1/3 the cost of new generation resources. Efficiency programs can also reduce the need to install, upgrade or replace transmission and distribution equipment.

#Alignment, #VibrationAnalysis, #MotorEnergySavings, #MotorRepairs, #MotorRewinding, #Coolingtower, #EnergyefficiencyHVAC, #pumps, #blowers, #gearbox

 https://alpsmsi.com/alps/

[alpsmsimotorrepairs-blog]

OVERVIEW

According to American Council for an Energy Efficient Economy (ACEEE), when utilities and other groups discuss ―energy efficiency as a resource,‖ they are defining efficiency as an energy resource capable of yielding energy and demand savings that can displace electricity generation from coal, natural gas, wind power, and other supply- side resources. Investments in energy efficiency and the resulting resource benefits are factored directly into utility energy resource decision making about investing in new resources and operating existing systems.

Defining efficiency as a resource and integrating it into utility decision making is especially critical because of the clear resource cost advantage of energy efficiency. Energy savings from customer energy efficiency programs are typically achieved at 1/3 the cost of new generation resources. Efficiency programs can also reduce the need to install, upgrade or replace transmission and distribution equipment.

#Alignment, #VibrationAnalysis, #MotorEnergySavings, #MotorRepairs, #MotorRewinding, #Coolingtower, #EnergyefficiencyHVAC, #pumps, #blowers, #gearbox   https://alpsmsi.com/alps/

[alpsservicesincorporated-blog]

OVERVIEW

According to American Council for an Energy Efficient Economy (ACEEE), when utilities and other groups discuss ―energy efficiency as a resource,‖ they are defining efficiency as an energy resource capable of yielding energy and demand savings that can displace electricity generation from coal, natural gas, wind power, and other supply- side resources. Investments in energy efficiency and the resulting resource benefits are factored directly into utility energy resource decision making about investing in new resources and operating existing systems.

Defining efficiency as a resource and integrating it into utility decision making is especially critical because of the clear resource cost advantage of energy efficiency. Energy savings from customer energy efficiency programs are typically achieved at 1/3 the cost of new generation resources. Efficiency programs can also reduce the need to install, upgrade or replace transmission and distribution equipment.

#Alignment, #VibrationAnalysis, #MotorEnergySavings, #MotorRepairs, #MotorRewinding, #Coolingtower, #EnergyefficiencyHVAC, #pumps, #blowers, #gearbox   https://alpsmsi.com/alps/

[alpsmsisystems-blog]

SYSTEM ANALYSIS

Vibration Analysis

Unscheduled downtime may cost millions of pesos per hour. Fortunately, modern vibration analysis equipment and software predict developing problems so that repair happens before disaster strikes.

ALPS MSI has the expertise and license to conduct vibration analysis with end result of providing Reliability Improvement, Condition Monitoring and Precision Maintenance

Case Study: Pump

The pump is brand new and operational 2008. In August 12, 2009 equipment owner hired our services to conduct Proactive Reliability Maintenance – Vibration Analysis. Below is the screenshot of the vibration results.

We recommended inspection why bearings were failing in spite that it was still considered brand new. In early part of April 2010, equipment owner called our attention that pump casing cracked as show in Figure 1.

Further inspection revealed as follows:

Defective Pump Inboard Bearing No. 7314 BEJ single

Defective Pump Outboard Bearing no. NU 314 ECJ/C3.

Damaged oil seals.

Mechanical seal condition was still good.

Action taken:

Re-machine the shaft to the required interference fits that will fit two pieces of 7314 BECBJ arranged backto-back. Aligned motor and pump shaft using Fixturlaser     NXA Alignment System.

Click here to Email and Contact Us after repair Results.

#Alignment, #VibrationAnalysis, #MotorEnergySavings, #MotorRepairs, #MotorRewinding, #Coolingtower, #EnergyefficiencyHVAC, #pumps, #blowers, #gearbox   http://alpsmsi.com/alps/system-analysis/

[alpsmsirepairs-blog]

Energy Efficiency Solutions

Clean Energy Solutions: HVAC Systems

Philippines is one of the highest electricity rates in South East Asia. Each industrial facility finds ways to reduce its Energy, Operating & Maintenance Cost (E&OM).

ALPS MSI in partnership with Siemens Philippines, Inc. is committed to help industrial motor users in reducing its power consumption. Proper design that is suitable for its use and optimized for its consumption plays an essential role for the energy efficiency of motors and its drive systems. Modern drive technology offer an enormous saving potential of up to 70 percent. This is the case for new plants as well as for modernization’s (retrofits).

The key for this is in a targeted analysis of drive systems regarding their respective degree of utilization and energy consumption. The tailored selection or modernization of motors and converters based on this, often already pays off in a very short time through the energy cost savings achieved.

The decisive factor for the most efficient use of energy is in reducing the energy consumption to the real demand of the application. The path to this is via a comprehensive bundle of measures. For this purpose:

costs and benefits of possible     savings are compared with each other,

the drive components are designed     according to the requirements and

the ideal path to sustainable     realization of the entire concept are formulated.

ALPS MSI offers industrial facilities our technical and financing for reducing your energy consumption.

Your benefits:

Efficient use of energy through     installation of modern energy-saving motors;

Optimized use of energy through     retrofit to variable-speed drives;

Adjusting the energy expenditure     to the specific requirement of the application;

Improved motor start-up behavior;

Low network load due to fewer     harmonics;

Reduced operational noise; and

Less wear and tear through     adjusted speed.

#Alignment, #VibrationAnalysis, #MotorEnergySavings, #MotorRepairs, #MotorRewinding, #Coolingtower, #EnergyefficiencyHVAC, #pumps, #blowers, #gearbox

 http://alpsmsi.com/alps/services/energy-efficiency-solutions/

[alpscranedriveslaguna-blog]

SYSTEM ANALYSIS

Vibration Analysis

Unscheduled downtime may cost millions of pesos per hour. Fortunately, modern vibration analysis equipment and software predict developing problems so that repair happens before disaster strikes.

ALPS MSI has the expertise and license to conduct vibration analysis with end result of providing Reliability Improvement, Condition Monitoring and Precision Maintenance

Case Study: Pump

The pump is brand new and operational 2008. In August 12, 2009 equipment owner hired our services to conduct Proactive Reliability Maintenance – Vibration Analysis. Below is the screenshot of the vibration results.

We recommended inspection why bearings were failing in spite that it was still considered brand new. In early part of April 2010, equipment owner called our attention that pump casing cracked as show in Figure 1.

Further inspection revealed as follows:

Defective Pump Inboard Bearing     No. 7314 BEJ single

Defective Pump Outboard Bearing     no. NU 314 ECJ/C3.

Damaged oil seals.

Mechanical seal condition was     still good.

Action taken:

Re-machine the shaft to the     required interference fits that will fit two pieces of 7314 BECBJ arranged     backto-back. Aligned motor and pump shaft using Fixturlaser NXA Alignment     System.

Click here to Email and Contact Us after repair Results.

#Alignment, #VibrationAnalysis, #MotorEnergySavings, #MotorRepairs, #MotorRewinding, #Coolingtower, #EnergyefficiencyHVAC, #pumps, #blowers, #gearbox

 http://alpsmsi.com/alps/system-analysis/

[dubaivisasolutions]

Experience An Exciting Holiday Experience in Dubai's 10 Unique Water Parks

Hot sun, desert, unbreakable heat - is that what you picture when you think about Dubai? Think again! Dubai is home to some of the best water parks in the world. So, if you are thinking of fun things to do in Dubai, then grab your Dubai visit visa to visit these unique water parks in Dubai:

Wild Wadi Water Park

Located right next to the Burj Al Arab, Wild Wadi Water Park is easily the most popular water park in Dubai. It has the biggest wave pool in the Middle East called Breakers Bay, and there are more than 30 rides and slides. The best ones you must try are Tantrum Alley & Burj Surf, and Wipeout AND Ride.

Laguna Water Park

The biggest water park in Dubai is also the best one for families. There are many rides at Laguna Water Park. Located on La Mer, the park is right next to the beach. Some amazing rides here worth trying are Manta Family Raft Ride, MadOz, Mad Racer, and Aqualoop.

Yas Water World

Yas Waterworld located on Yas Island in Abu Dhabi is one of the most iconic water parks in the Middle East. Yas Waterworld has more than 45 slides & rides that will thrill you to the max. Some of the best adrenaline-pumping rides here are Falcons Falaj, Liwa Loop, Bubbles Barrel, Dawwama, Jebel Drop, and Hamlool’s Hump.

Aquaventure Water Park

Aquaventure Water Park is a place like no other! Where else in the world will you find a lagoon full of sharks? Located at The Atlantis, some must-see rides here are Leap of Faith, Torrent River, and Aquaconda, the latter being the world’s longest water tube slide. Many consider Aquaventure Water Park the best water park in Dubai.

LEGOLAND Water Park

LEGOLAND Water Park is located inside Dubai Parks & Resorts. Since LEGOLAND is a place for kids, there are many rides, slides, shows, and themes specially made for the kids. But there are also many rides for adults like Joker Soaker and Splash Safari. LEGOLAND is a must-visit for all water park enthusiasts.

Ice Land Water Park

Home to the largest man-made waterfall, Penguin Falls, Ice Land Water Park in Ras Al Khaimah is another must-visit water park. It is just a 1-hour away from Dubai with the picturesque Hajar Mountains in the backdrop and the beach to the other side. 15 rides will keep you entertained throughout.

Splash N Party

Want to hold a party for your kid at a waterpark? Splash N Party is the place to do that. This small water park is designed for small children up to the age of 10. All the rides and slides are designed for a certain height and even the water doesn't get higher than waist-high. Parents can easily relax when their kids are having fun.

Jungle Bay Dubai

Opened recently in February 2021, Jungle Bay is already becoming a crowd favourite. Jungle Bay Dubai, located next to Mina Seyahi Bay, is a family-friendly destination with minimal frills and maximum enjoyment. Excellent rides and slides, good food, and fun environment - what else could one want?

Murjan Splash Park

This indoor water park is another great place for celebrations like birthday parties. From lazy river rides and bumper boats to water war stations where you can indulge in water gun and water balloon fights, Murjan Splash Park has it all. Bring your kids here and they’d never want to leave.

Circuit X Splash Park

Circuit X Splash Park is one of Abu Dhabi’s top children’s water parks. The park has a splash area, pool area, and climb area where kids enjoy under the watchful eyes of the park employees. This is a place where you can just let your kids enjoy themselves while you relax.

Dubai is UAE’s water park city, so don’t think twice about coming here in the summer. Just get your Dubai visit visa and explore these hidden gems in Dubai for a fun experience in Dubai's best water park.

[alpsmsienergyefficiency-blog]

SYSTEM ANALYSIS

Vibration Analysis

Unscheduled downtime may cost millions of pesos per hour. Fortunately, modern vibration analysis equipment and software predict developing problems so that repair happens before disaster strikes.

ALPS MSI has the expertise and license to conduct vibration analysis with end result of providing Reliability Improvement, Condition Monitoring and Precision Maintenance

Case Study: Pump

The pump is brand new and operational 2008. In August 12, 2009 equipment owner hired our services to conduct Proactive Reliability Maintenance – Vibration Analysis. Below is the screenshot of the vibration results.

We recommended inspection why bearings were failing in spite that it was still considered brand new. In early part of April 2010, equipment owner called our attention that pump casing cracked as show in Figure 1.

Further inspection revealed as follows:

Defective     Pump Inboard Bearing No. 7314 BEJ single

Defective     Pump Outboard Bearing no. NU 314 ECJ/C3.

Damaged     oil seals.

Mechanical     seal condition was still good.

Action taken:

Re-machine     the shaft to the required interference fits that will fit two pieces of     7314 BECBJ arranged backto-back. Aligned motor and pump shaft using     Fixturlaser NXA Alignment System.

Click here to Email and Contact Us after repair Results.

Reference: www.samatic.com

#Alignment, #VibrationAnalysis, #MotorEnergySavings, #MotorRepairs, #MotorRewinding, #Coolingtower, #EnergyefficiencyHVAC, #pumps, #blowers, #gearbox   http://alpsmsi.com/alps/system-analysis/

[alpscranedrives-blog]

ENERGY EFFICIENCY LUBE

The more there is friction on the rolling element of bearing; motor exerts more power thereby increase your energy consumption. Suitable and correct amount of lubricants feed into the bearing will lessen friction, reduces load (HP), and make the whole drive system more efficient.

Bearing failure is a major cause of equipment downtime in today‘s industrial environment, most often resulting from improper lubrication. Improper lubrication scenarios include the contamination of the lubricant by dust, dirt and moisture, inadequate amounts of lubricant applied to the bearing, and/or over-lubrication of the bearing.

Each bearing failure directly impacts the production cycle. While bearings can be expensive, replacement cost alone is often miniscule compared to lost production and the cost to repair the damage.

Fig 1 shown that 51% of motor failure is caused by bearings. This is our experience in the repair of motors. According to a recent study as shown in Fig. 2, 15% is caused by insufficient lubrication; 5% liquid contamination; 20% solid contamination (grease container exposed to environment not properly covered or sealed).

Contamination is caused by foreign substances getting into bearing lubricants or cleaning solutions. These include dirt, abrasive grit, dust, steel chips from contaminated work areas and dirty hands or tools.

Why, in the age of technology, is this a problem? It is because many bearings are still lubricated manually. No matter how diligently a maintenance staff adheres to a lubrication schedule, it is a difficult task. Because employees are expected to manage multiple responsibilities in the lean environment of today‘s plants, it is common that proper lubrication is not considered a priority.

Solutions:

Use the appropriate type and correct amount of lubricant, avoid grease loss, and follow appropriate     re-lubrication intervals.

Filter the lubricant using automatic lubricators and clean work areas, tools, fixtures and hands to reduce the risk of contamination.

Reference: http://www.slideshare.net/dmanney/why-electric-motors-fail      http://vmpauto.com/article/v-debryakh-tribologii

Automatic Lubrication for Manufacturing Applications   ATS Electro-Lube manufactures self contained single-point and multi-point automatic lubrication products that provide effective, dependable lubrication for manufacturing equipment of all types. Our self-contained mechanical lubricators can deliver up to two full years of continuous lubrication, and can be installed almost anywhere—including remotely, as much as 30‘ from the lubrication point. Our devices are a safe, efficient alternative to daily manual lubrication.

We also offer a variety of accessories, including mounting brackets, control options and power options. ATS‘ motor-driven units, the ULTIMATE, TITAN, OILER and JACK series can all lubricate multiple points with a single unit via distribution blocks. Our TITAN, OILER and JACK units are refillable, for added convenience.

ATS‘ innovative auto lubers are ideal for bearing lubrication, engine lubrication, and any other machine lubrication needs your manufacturing processes may have. Our automatic mechanical lubricators deliver a reliable, consistent solution for any machinery that requires regular lubrication.

#Alignment, #VibrationAnalysis, #MotorEnergySavings, #MotorRepairs, #MotorRewinding, #Coolingtower, #EnergyefficiencyHVAC, #pumps, #blowers, #gearbox

http://alpsmsi.com/alps/energy-efficiency-lube/

[circuitbreakersdriver-blog]

AUSTRALIAN WINDERS

MV / HV Motor & Generator Repairs

ALPS MSI & AUSTRALIAN WINDERS are in alliance to cater repairs of MV/HV Motors & Generators.

AUSTRALIAN WINDERS is an Australian based company with a highly skilled and qualified team that extends around the world, to the U.S, U.K., New Zealand and South America. AUSTRALIAN WINDERS specialist workforce in Large Rotating Machines in both the Mining and Power Generation industries enables them to offer extensive field services to clients large and small. Whether you need a turnkey solution or just a few extra staff, their services include consultation, project supervision, test and inspection, dry ice cleaning, full installations, rewinds and rewedges.

AUSTRALIAN WINDERS has the wealth of experience at their fingertips that enables them to continue to provide prompt services Worldwide. ALPS MSI is proud to bring them in to the Philippines to provide their expertise to assist you with all of your rewinding and project management needs as well as train ALPS MSI workforce.

#Alignment, #VibrationAnalysis, #MotorEnergySavings, #MotorRepairs, #MotorRewinding, #Coolingtower, #EnergyefficiencyHVAC, #pumps, #blowers, #gearbox

  http://alpsmsi.com/alps/services/australian-winders/

[alpsindustrialcommunication-blog]

Gearbox Repair Maintenance

Gearboxes are essential devices found everywhere in industrial manufacturing facilities, providing even distribution of power and torque wherever needed to fuel manufacturing productivity and profits. Despite how ubiquitous gearboxes may be, it‘s easy to overlook their repair needs. Forgoing routine maintenance on any gearbox could spell disaster for the entire production system. In order to keep everything running smoothly, be sure to take the time to perform basic upkeep and repairs on gearboxes to get the most out of their lifespan.

In order to prevent the need for any costly repairs or downtime, the first and most important part of any maintenance plan is diagnosing problems before they happen using vibration analysis.

It can assess what and where the damage has occurred simply by analyzing the frequency of the vibration being produced by the gearbox. Each gear mesh and bearing, depending on its size and shape, creates a certain frequency. Spikes in these frequencies can give an engineer insight into what is happening inside the gearbox – data that can be used to diagnose the problem.

Another tool is oil analysis, a key indicator of gearbox health and can prolong gearbox life span.

The gearbox‘s oil should be regularly changed according to the needs of the specific system. Just like in a car‘s engine, oil lubricates the gears and prevents them from grinding against each other.

In the process of changing oil, a sample of the old oil can be collected and sent to a lab, where an analysis of particles inside it can reveal potential underlying issues in the gearbox.

Even without this analysis, taking note of any excessive surface heat, odd vibrations or unusual noises coming from a gearbox can help identify most issues that may need a closer look.

ALPS MSI offers comprehensive solutions to keep your rebuilt gearbox work reliably. It‘s possible to schedule proactive repairs ahead of time, as well as keep an inventory of spare parts stocked and ready for quick fixes.

#Alignment, #VibrationAnalysis, #MotorEnergySavings, #MotorRepairs, #MotorRewinding, #Coolingtower, #EnergyefficiencyHVAC, #pumps, #blowers, #gearbox

 http://alpsmsi.com/alps/services/gearbox-repair-maintenance/

[alpsmsimotorrepairs-blog]

Pump Repair

Refurbishing pumps is one of our expertise. In the repair, we focus on improving pump efficiency thereby reduce energy cost.

#Alignment, #VibrationAnalysis, #MotorEnergySavings, #MotorRepairs, #MotorRewinding, #Coolingtower, #EnergyefficiencyHVAC, #pumps, #blowers, #gearbox     https://alpsmsi.com/alps/pump-repair/

[alpsservicesincorporated-blog]

Computerized Motor Rewinding

When your motors need repair, count on ALPS MSI for efficiency improvement, quality, precision, and expert service – all backed by a 100% satisfaction guarantee.

We have the experienced & capabilities to restore motor efficiency, provide repair on-site or at our facility. We understand the complexities of AC and DC motor repair and will take the necessary steps to return your equipment to optimum working condition. Further, we offer testing of repaired motors to ensure the electrical and mechanical operation exceeds your expectations.

#Alignment, #VibrationAnalysis, #MotorEnergySavings, #MotorRepairs, #MotorRewinding, #Coolingtower, #EnergyefficiencyHVAC, #pumps, #blowers, #gearbox   https://alpsmsi.com/alps/computerize-motor-rewinding/