#Digiprog 3 v4.94

[xingobd2]

V4.94 Digiprog3 Master Programmer Car Speedometer Tool Full Set Multi-Languages https://www.ebay.com/itm/124876601042?hash=item1d1339b6d2:g:5-gAAOSwc1hhLExb

[diyobd2]

Digiprog 3 v4.94 read Audi by OBD ok & fast

Have used Digiprog 3 v4.94 for nearly one year around. Work well and fast with the digi. It’s my right-hand woman in the Audi repair shop.

Some test results i have taken notes:

Audi a1 works (depending on software number)

Audi a2 obd ok

Audi a3 repair 999999 in dash with digiprog

Audi a3 2001 vdo obd ok

Audi A3 2010 by OBD OK

Audi A3 2002 obd2 is ok

Audi a4 2001-2005-obd ok

Audi a4 8e b6 2004 obd ok, use 2 minutes

Audi a4 2007 obd dash read ok write ok/ecu make-it via touran edc16 write 2 times to change.

Audi a4 2009 3.0quattro obd ok

Audi a4 2005-2009 obd ok

Audi A4 2010 Work

Audi a4 2012 obd ok and fast

Audi a5 2013 obd ok

Audi a5-2010-obd ok 15 min

Audi a6 c5 obd

Audi A6 2002 ok after some effort.

Audi a5 2009 3.2L obd ok 30min

Audi A6, 2009 work OBD, 4-5 minute.

Audi A6 2010 dash via obd (takes a while to find code but ok)

Audi A8 4.2 tdi 2008 Dash OBD OK 2min

Audi S3 2002 obd2 is ok

Audi TT 2002 obd2 n8 is ok

Audi Q3 2010 obd ok 15 min

Audi Q5 2.0tdi 2010 by obd ...20-30min

Audi Q7 2012 20 sec by obd work ok

Audi Q7 2007 OBD work

Audi q7 2008 obd ok

Audi tt hc 12 plug ok

...

(sorry, that’s not the full Audi car list.. Sometimes busy to death and forgot it, but i will add more if possible :D)

And some photos of Audi A4 Avant 2.0tdi 2006 with DP3 clone obd ok. Enjoy!

C'est à partir de digiprog 3 support technique:Digiprog 3 v4.94 read Audi by OBD ok & fast

[automotivesuppliestoolscom]

Odometer Programmer Digiprog 3 v4.94 Digiprog III with OBD2 ST01 ST04 Cable

Buy > Odometer Programmer Digiprog 3 v4.94 Digiprog III with OBD2 ST01 ST04 Cable

(eBay Sponsored Link)

[xingobd2]

Digiprog 3 V4.94 Auto Car Mileage Correction O·ometer Adjustment Diagnostic Tool

https://www.ebay.com/itm/127111620853

[obd2serve]

#V494Digiprog3 #DigiprogIII #Digiprog3

V4.94 Digiprog 3 Main Unit For Digiprog 3 Digiprog iii Odometer Programmer Mileage Adjust Tool Main Head with OBD2 ST01 ST04 Cable

Skype :obd2serve@gmail.com Whatsapp :+86 13691674080

Wechat : +86 13691674080

[fionalyy88-blog]

#Digiprog 3 V4.94 OBD2 Version V4.94 Digiprog III odometer programmer Digiprog 3 4.94 mileage correction tool

To more informations pls contact WhatsApp/Wechat:+86-13538280570 Skype:fionalyy88@gmail.com

http://obd2top.com/digiprog-3-v494-obd2-version-v494-digiprog-iii-odometer-programmer-digiprog-3-494-mileage-correction-tool-p-1833.html

[mileagecorrection-blog1]

This video shows what comes in the Mileage Correction Tool DigiProg3 v.4.94 box and a brief description of what the contents are for.   For more info please visit ... http://www.digitaldashboardmileagecorrection.co.uk

�aRQB�>�

[cashbackonindustriatools]

Main Unit of Digiprog 3 Car Diagnostic Tester V4.94 with OBD2 ST01 ST04 Cable

Main Unit of Digiprog 3 Car Diagnostic Tester V4.94 with OBD2 ST01 ST04 Cable

$1.99 OFF for Xiaomi Piston Basic Edition Earphone !

You need to use promocode. The discount is available only for certain category. There is no minimum order value. The promotion is available for all customers of the store.

2 $ OFF   Start date: 15/11/2017 End date: 14/12/2017

CAZXM9E

Grab Now

Get Your Cash Back Offer

[cnobd2tool]

Which tool to correct odometer on Mercedes W212

I want to correct mileage on my W212 2013 year. Is only way to use MB CAN Filter?  I found some tutorial in carprog but doesn’t show steps with the mileage adjust. For example, if install mb can filter, do you still update ezs odometer value or just cluster? Yes I know AVDI Abrites original does it all, before you tell me, but can’t afford that software yet.

Anywhere else have to change it? Tire pressure sensors of transmission? Thank you in advance.

Customer solutions: 1.Late 2013 Mercedes W212 you need to correct odometer and install CAN Filter (EZS nothing).The can filter goes near the cluster. I have done with Original Yanhua Digimaster 3. It is not cheap. But I think at you can use digiprog 3. By the way, take backup from eeprom first.

2. If it is full color dashboard, digiprog 3 cant do it.. If it’s not facelift model (so before 2013) and use digiprog 3 v4.94, then you don’t need can filter/blocker. But a can blocker is better to use all times, because if dealer reads the EZS it shows same mileage as in tacho, if you don’t use can blocker then EZS shows 999999km.. (but normally dealers don’t read EZS, they only read ‘assyst manager’ when serviced).

To change mileage you need to use option ‘EZS’ in menu of mercedes w212 of digiprog III from CnAutotool.. then it blocks ezs and changes tacho automatically.

If you roll back odometer to a lower mileage off last service, its best to delete service history in car. use option ‘assyst manager’. enter ‘744’ days and ‘25000’kms for next service warning, and press ‘V’ when it asks to delete service history.

When you have a diesel it probably gives DPF error in car. and the car will run in emergency-mode, only drives max 80kmh. digiprog3 can’t reset this. You have to go to dealer or someone else who can reset dpf.

When some other errors turn up in display use the ‘clr error’ option to reset.

[kingbolen]

Digiprog 3 - cost-effective mileage correction tool

V4.94 digiprog 3 is latest version of Digiprog3,add more car models on the basic of V4.88.Digiprog3 is a cost-effective mileage correction tool.

 Digiprog III (Digiprog 3) Odometer Programmer is the well-known worldwide leader in the production and marketing of digital speedo programming and correction software. With the use of the Digiprog III,the odometer adjustment is a breeze.  We are professional in the field of digital vehicle engineering ,and we focus on advancing the quality of our products all the time,now we have the new version V4.94 digiprog 3 ,this new version add more car models on the basic of V4.88.  Here are some details about V4.94 Digiprog 3 Odometer Programmer.  V4.94 supports following languages: Deutsch, English, Espanol, French, Portuguese, Italiano, Turkish, Nederlands.  Besides,V4.94 Digiprog 3 Newly Added Model List:  Audi :  -A3 new version  Ford :  -F150 24C16  -Falcon 24c02  Mercedes :  -W176 new version  -W204 new version Diag  -w212 new version Diag  Opel :  -Insignia new version  -Astra new version  Also,service interval adjustments and settings,assyst processing,fault memory read-erase,EEPROM programmer and Integrated PC communication are all the features of the new version V4.94. It deserves you to own one.

[automotivesuppliestoolscom]

Odometer Programmer Digiprog 3 v4.94 Digiprog III with OBD2 ST01 ST04 Cable

Buy > Odometer Programmer Digiprog 3 v4.94 Digiprog III with OBD2 ST01 ST04 Cable

(eBay Sponsored Link)

[fionalyy88-blog]

#Digiprog3 V4.94 Digiprog 3 Main Unit For Digiprog 3 Digiprog iii Odometer Programmer Mileage Adjust Tool Main Head with OBD2 ST01 ST04 Cable

To more informations pls contact

WhatsApp/Wechat:+86-13538280570

Skype:fionalyy88@gmail.com

http://gsunlight.com/v494-digiprog-3-main-unit-for-digiprog-3-digiprog-iii-odometer-programmer-mileage-adjust-tool-main-head-with-obd2-st01-st04-cable-p-2190.html

[myeobd2fr-blog]

VW Passat 2004 KM change with v4.94 Digiprog3 odometer programmer

Vehicle model: VW Passat B5 2004 Equipment: DigiProg 3 V4.94 Digiprog III odometer correction tool (lowest price version) Target: Second hand VW Passat with wrong KM (81KM), change the odometer to the actual value 1500KM 1. Dismantle the dashboard (You can hook it up directly to vehicle OBD port as well). The dashboard light is flashing 2. Setup Digiprog 3 OBD odometer correction tool. Connect DIGIPROG3 v4.94 main unit to the vehicle OBD diagnostic socket under dashboard. 3. Power on the device and the system will display software information 4. Password is required to enter the system. The default password is “1” 5. Come to the MAIN MENU, select odometer correction based on vehicle type CAR/TRUCK 6. Select vehicle make: VW>>vehicle model PASSA>>PASSAT/B5/B5GP>>vehicle year 2004 7. Manually enter correct KM in the space below KM (NEW) 8. Then the dashboard light will illuminate and the DIGIPROG III km tool screen will prompt you to check the written value After complete change the odometer to correct current value, exit the program. More odometer correction tool click here.

[kingbolen]

Digiprog III (Digiprog 3) is the best mileage correction tool

Digiprog III (Digiprog 3) Odometer Programmer is the well-known worldwide leader in the production and marketing of digital speedo programming and correction software. With the use of the Digiprog III,the odometer adjustment is a breeze.

We are professional in the field of digital vehicle engineering ,and we focus on advancing the quality of our products all the time,now we have the new version V4.94 digiprog 3 ,this new version add more car models on the basic of V4.88. Here are some details about V4.94 Digiprog 3 Odometer Programmer. V4.94 supports following languages: Deutsch, English, Espanol, French, Portuguese, Italiano, Turkish, Nederlands. Besides,V4.94 Digiprog 3 Newly Added Model List: Audi : -A3 new version Ford : -F150 24C16 -Falcon 24c02 Mercedes : -W176 new version -W204 new version Diag -w212 new version Diag Opel : -Insignia new version -Astra new version Also,service interval adjustments and settings,assyst processing,fault memory read-erase,EEPROM programmer and Integrated PC communication are all the features of the new version V4.94. It deserves you to own one. Go to buy Digiprog 3