#Macard WiFi Extender Setup

[macardwifi]

Macard WiFi Extender Setup Guide: Boost Your Signal Easily

To initiate the Macard wifi extender setup, plug the extender into an available power outlet. Connect your smartphone or computer to the extender's temporary Wi-Fi network. Open a web browser and enter go.macard.online or the default IP address. Follow the setup wizard to connect the extender to your existing home Wi-Fi. Expand your Macard Wi-Fi network.

[carlos-smith]

Macard WiFi Extender Setup

Nowadays, a wide range of routers and extenders are available in the market. As high-speed and stable network is the demand of the present era, similarly, choosing the right extender is also essential.  Therefore, the Macard Wi-Fi extender is one of them. Today we will discuss the Macard WiFi Extender Setup here in our post. 

Process for the Macard WiFi extender setup

First and foremost, to set up your Macard Wi-Fi extender, you have to log in to your extender’s web interface. Additionally, by logging into the web interface of your extender, you can easily connect it to your router. 

Similarly, you can log in to Macard extender through default login credentials and then proceed with the setup. Now, take a look at the Macard WiFi extender setup quickly:

Firstly, link your device to the extender’s network.

You can use an Ethernet cable to connect your PC to the extender’s network.

After that, open your web browser and type the default IP address (192.168. 10.1) in the address bar. 

Tap on login first to access the web interface of the extender.

The web interface will search and show all the available networks.

Now, click on your home network and connect by using the accurate password.

Wait for some time till your extender connects to the router.

Finally, set up the configuration and move the extender.

On the whole, these steps assist you with an easy and quick  Macard WiFi extender setup. Additionally, make sure that you configure all the settings appropriately and after that move the extender near the dead zones. For more info regarding the Macard extender, contact us freely!

[gomacard]

How to Set Up Your Macard RE1200 WiFi Extender

Macard Wireless Extender Setup

via WPS

Connect the Macard extender to a power outlet located near your router. Wait until the Power LED turns solid.

Find the WPS button and press it.

This means that the WPS light should begin blinking. The WPS light on the router should start blinking.

Press the WPS button of your Macard extender within 2 minutes after pressing the WPS button of the router.

The WPS light should start blinking on the extender.

The extender should be solid after about 30-60 second, indicating that the connection was successful. You can move the device anywhere within range of your router after the connection.

Via Gomacard.online

Connect the Macard extender to a power outlet close to your router. Wait until the LED becomes stable (this could take a few minutes).

Go to WiFi settings on your computer, tablet or phone.

Connect to the network by searching for its name. There may not be a password required.

Go to gomacard.online in your browser. Log in to the device using the default admin credentials.

Login with the default password

Username : admin

Password : admin

Select "Repeater Mode" from the menu. The app will search for WiFi networks nearby.

Choose your primary WiFi network. Enter the WiFi password for your router.

You can choose to name your extended network or leave it at the default.

Via the 192.168.10.1

Macard WiFi extender should be placed in the middle of your wireless router, and the area you wish to extend Wi-Fi. Connect it to a power outlet, then connect to its WiFi network.

Go to the WiFi settings to connect your computer. The manual of the extender will usually mention this network name (SSID). This initial connection is unlikely to require a password.

Open any browser on the connected device.

Enter 192.168.10.1 into the address bar.

Now you should see the login page for your Macard wifi extender.

Often, the default username and password for both fields is admin.

Click Login and enter your credentials.

A setup wizard will guide you once you log in. Follow the instructions on screen.

Search for Wi-Fi networks nearby. Select the name (SSID), of your home Wi-Fi network.

Enter the password to your home Wi-Fi.

You may be asked to create a new Wi-Fi extended network name (SSID).

You can keep the name of your main network, or you can create a different one so that the extended network is easily identifiable.

When you click Save, the extender will attempt to connect to an existing Wi-Fi network to broadcast your extended network.

Where Should the Extender Be Relocated After Installation?

Connect your device to the newly extended WiFi network by disconnecting it from the setup WiFi network. Use the password that you entered when configuring the extender. To relocate the extender to another location, make sure it is within the range of the main router.

Troubleshooting tips

Rebooting Extender Network

Remove the extension cord from the outlet. Unplug the extender for 15-30 seconds. It will then shut down completely. Reconnect the device to the outlet.

Wait a few moments for the extender's power to come back on, re-establish a connection with your router main and broadcast its expanded network. You will typically see the indicators lights cycle, and then return to their normal state.

Resetting Macard WiFi Extender

Make sure that your Macard WiFi extender has been plugged in and turned on.

Use a paperclip or an object with a thin, pointed tip. Insert the paperclip gently into the reset pinhole. Hold the reset button down for 8-10 seconds. Release the reset button after 8-10 seconds.

Now, the extender will reboot by itself. It may take a couple of minutes for this process to complete. When the indicator lights return to their default settings, you'll know that it's done.

The Summary

It is easy to set up the MACARD RE1200 wifi extender by using IP address or WPS. You have hopefully chosen the correct setup method and installed the device successfully.

FAQs

How do I set up Macard model RE1200 WiFi extender?

Install the device using WPS, IP address or interface. The blog post contains all the instructions for each setup method.

How do I change the password on Macard RE1200 Wireless Extender?

Use the IP or URL address to access the interface of the extender. Select Wireless Settings in the settings. Enter the new WiFi password after selecting SSID. Apply it by saving.

[brianjason]

How to Macard WiFi Extender Setup?

To perform the Macard WiFi Extender Setup, open the web browser and type the 192.168.10.1 IP address in the browser bar. Then, a login window appears to you. Now, log into your account using admin credentials. Now, select the ‘Repeater Mode’ as the operation mode, and customize your settings as per your preferences. Visit us for more!

[routersetuphelp]

setup my Macard dual band wifi range extender | Installation Instruction...

[routersetuphelpus]

[orbitloginnetnet]

If you have set up the Orbi, take a step forward and perform Macard WiFi extender setup with netgear orbi login

[easypcexperts]

How to Perform the Macard Cryo360 Extender setup?

You complete the Macard Cryo360 extender setup easily by logging into its web interface using the default IP address & login credentials. Using the default IP address, you can access the Macard Cryo360 login page. After that, you must add the extender device to the main WiFi network and configure its settings by following the on-screen instructions. Visit our website for more information.

[macardwifi]

How to Factory Reset Macard Wifi Extender: Step-by-Step Guide

You may return your Macard WiFi Extender to its original settings by doing a "factory reset Macard WiFi Extender" if you're having problems with it. This method works well for fixing typical issues like sluggish speeds or lost connections. Resetting your Macard WiFi extender is simple if you follow our detailed instructions. See our website for further information.

[carlos-smith]

Macard WiFi Extender Setup

Macard Wifi Extender Setup is a simple process .Plug it into an electrical outlet, connect to the "Macard_EXT" network on your device, and access the setup page via a web browser. Follow the on-screen instructions to extend your WIFI network, eliminating dead zones and improving signal strength. Enjoy seamless connectivity in no time.

[macardwifi]

Troubleshooting Macard Extender Not Working

If your Macard Extender Not Working, then, it can arise from various factors, including incorrect setup, being out of range of your main router, or needing a firmware update. To troubleshoot, ensure the extender is plugged in correctly, within the router's range, and try rebooting it or resetting the device. Still struggling? Reach out to our experts!

[gomacard]

How to Set Up Macard WiFi Extender via Manual Method?

There are many methods to setup your Macard WiFi extender, but manual method is the most commonly used one. It is very easy and simple; have a look at the instructions of manual method below:

Manual Method

Link PC with Extender Network

There are two ways to link your PC with the extender’s network: Ethernet cable or SSID (wirelessly).

To connect with the help of the Ethernet cable. Plug the cable’s one end to the extender only port and plug other end to computer’s ETHERNET port.

To connect using SSID, open PC’s Wi-Fi settings and choose the Extender SSID name, there is no default password, so you can connect without any security key.

Access Macard Interface

Go into the browser after establishing the connection. Here, search the Macard WiFi extender login URL go.macard.online or IP address 192.168.10.1. The login page will appear on the screen. Enter the default Macard WiFi extender login password: admin and click LOGIN button.

Using credentials, you will be able to access the interface and it’ll ask you to select the Country and time zone.

Finish Macard WiFi Extender Setup

After selecting your country and time zone, click Next. On the next page, extender will search the local WiFi networks, choose the host router’s network and enter its WiFi password to establish the connection. Click NEXT.

Create the extender network on the next page. Enter the WiFi name and password for the extended SSID network. Choose SAVE to apply settings.

Now, extender will reboot itself to install all the changes. After that, you can connect to Macard extender’s network.

There are more configuration methods for Macard WiFi range extender, have a glance at those methods as well.

WPS Method

Power the extender near host router.

Find the WPS button on the host router and extender.

Press the WPS button of the extender first, its WPS LED will start to blink.

Then within two minutes press the WPS button of the host router.

Wait until the extender’s WPS LED stops blinking and turns solid, it means the router is connected with extender.

Now, you can use the host router WiFi credentials to connect with the new extended network.

Ethernet Cable Method

If you want to link the router with the extender via cable, then it requires an ethernet cable, wall socket near router, PC connected with extender, and admin login password.

To connect extender to host router, plug the Ethernet cable into the extender only port and host router’s LAN port.

Plug the extender into a power outlet and turn it on.

Then, link your PC with the extender SSID network through WiFi.

Go into the browser and search the Macard WiFi extender login URL go.macard.online.

Macard WiFi extender login page will appear, here enter the default admin password: admin (in lowercase).

Click LOGIN button to access the interface and follow the on-screen instructions.

After finishing the Macard WiFi extender setup, you should change the admin password for security reasons.

How to Change Macard Admin Password?

You have to access the interface with the help of old admin password and then follow these steps:

Go into the settings using the dashboard

Select the admin tab.

Enter the new admin password in the given password field.

Click SAVE to apply the new admin password.

Now, you can use this new changed password to access Macard WiFi extender’s login interface in PC.

The Conclusion

The Manual method configuration is easy and quick for the Macard WiFi extender setup. In this method, a user need not use any cable, or place it immediately next to the host router. Just plug the extender within the reach of router and finish the setup. In addition to the manual method guide, we have also provided instructions for other setup methods in this article post.