#Mcb Channel Roll Forming Machine

[superdamachine86]

MCB Channel DIN Rail Machine 相片擁有者 Rebaca Dan 透過 Flickr： Steel Channel DIN Rail Top Hat Fabricating Machine for Circuit Breaker Rail & Control Panel Board Mounting. www.superdamc.com/channel-roll-forming-machine/top-mcb-ch...

[rollformingmachineindia-blog]

Details of MCB Channel Roll Forming Machine

A) D coiler 5 ton cap. B) Punching press 20 tone 2 nos. C) Entry Gate with D) Roll Forming Machine with 14 station, 7 Gear Boxes & 10 H.P. electrical. E) Control Panel semi auto F) Cutting Unit (Hydro.)

TECHNICAL SPECIFICATIONS

Maximum sheet width that can be formed 350mm

Maximum sheet thickness in CRCA Strips that can be formed 3 mm(M.S.)

Horizontal distance between shafts 400mm

Number of forming stations 14 nos.

Vertical station 12 nos.

Total HP for Line 16

Speed of the machine 4mt/minute

Size of machine 6300 x 1200 x 1000 mm

MANDREL UNCOILER

Coil weight 10 MT Max

Coil width 400 MM

Coil bore 450 MM min, 510 MM max

dia.Mandrel movement Manually adjusted

Back Tension Manually adjusted

Motor ABB Gear box Elecon Bearing SKF

[rollforminginindia-blog]

We produce a high quality of the MCB Channel Roll Forming Machine. Which is affected using superior method, our in house drawing division helps efficiently in the keeping customer specific demand in mind.

De coiler 1 ton cap.

Entry Gate with

Roll Forming Line with 9 stations, 1 Gear Boxes & 2 H.P. electrical.

Control Panel semi auto

Cutting Unit

Technical Specifications : (Plate body)

Maximum sheet width that can be formed : 55mm

Maximum sheet thickness in CRCA Strips that can be formed : 1 mm

Vertical distance between shafts : 80 mm

Horizontal distance between shafts : 175mm

Number of forming stations : 9 nos.

Vertical station : 7 nos.

Total HP for Line : 3(ABB)

Speed of the machine : 4mt/minute

Size of machine : 1600 x 800 x 1100 mm

Mandrel Uncoiler

Coil weight : 1 MT Max

Coil width : 90 MM

Coil bore : 450 MM min, 510 MM max dia.

Mandrel movement : Manually adjusted

Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

[customrollformingmachine-blog]

Details of MCB Channel Roll Forming Machine

A) D coiler 5 ton cap. B) Punching press 20 tone 2 nos. C) Entry Gate with D) Roll Forming Machine with 14 station, 7 Gear Boxes & 10 H.P. electrical. E) Control Panel semi auto F) Cutting Unit (Hydro.)

TECHNICAL SPECIFICATIONS

Maximum sheet width that can be formed 350mm

Maximum sheet thickness in CRCA Strips that can be formed 3 mm(M.S.)

Horizontal distance between shafts 400mm

Number of forming stations 14 nos.

Vertical station 12 nos.

Total HP for Line 16

Speed of the machine 4mt/minute

Size of machine 6300 x 1200 x 1000 mm

MANDREL UNCOILER

Coil weight 10 MT Max

Coil width 400 MM

Coil bore 450 MM min, 510 MM max

dia.Mandrel movement Manually adjusted

Back Tension Manually adjusted

Motor ABB Gear box Elecon Bearing SKF

[rollformermachine-blog]

We produce a high quality of the MCB Channel Roll Forming Machine. Which is affected using superior method, our in house drawing division helps efficiently in the keeping customer specific demand in mind.

De coiler 1 ton cap.

Entry Gate with

Roll Forming Line with 9 stations, 1 Gear Boxes & 2 H.P. electrical.

Control Panel semi auto

Cutting Unit

Technical Specifications : (Plate body)

Maximum sheet width that can be formed : 55mm

Maximum sheet thickness in CRCA Strips that can be formed : 1 mm

Vertical distance between shafts : 80 mm

Horizontal distance between shafts : 175mm

Number of forming stations : 9 nos.

Vertical station : 7 nos.

Total HP for Line : 3(ABB)

Speed of the machine : 4mt/minute

Size of machine : 1600 x 800 x 1100 mm

Mandrel Uncoiler

Coil weight : 1 MT Max

Coil width : 90 MM

Coil bore : 450 MM min, 510 MM max dia.

Mandrel movement : Manually adjusted

Back Tension : Manually adjusted

[coldrollformingmachine-blog]

De coiler 1 ton cap.

Entry Gate with

Roll Forming with 9 station , 1 Gear Boxes & 2 H.P. electrical.

Control Panel semi auto

Cutting Unit

Technical Specifications : (Plate body)

Maximum sheet width that can be formed : 55mm

Maximum sheet thickness in CRCA Strips that can be formed : 1 mm

Vertical distance between shafts : 80 mm

Horizontal distance between shafts : 175mm

Number of forming stations : 9 nos.

Vertical station : 7 nos.

Total HP for Line : 3(ABB)

Speed of the machine : 4mt/minute

Size of machine : 1600 x 800 x 1100 mm

Mandrel Uncoiler

Coil weight : 1 MT Max

Coil width : 90 MM

Coil bore : 450 MM min, 510 MM max dia.

Mandrel movement : Manually adjusted

Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Roll shafts

The roll shafts dia. 40mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive

The drive to the roll former will be by means of a gear box system. The main drive will be provided by means of 2 HP motor

Tooling

One set of Tooling with EN31 grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, bore grinding, profile machining and inspection with final template for above.

Cutting Unit

Hydro. press 10 tone

Motor – ABB

Bearing –SKF

Gear box- ELECON

[rollformingindia]

We produce a high quality of the MCB Channel Roll Forming Machine. Which is affected using superior method, our in house drawing division helps efficiently in the keeping customer specific demand in mind.

De coiler 1 ton cap.

Entry Gate with

Roll Forming Line with 9 stations, 1 Gear Boxes & 2 H.P. electrical.

Control Panel semi auto

Cutting Unit

Technical Specifications : (Plate body)

Maximum sheet width that can be formed : 55mm

Maximum sheet thickness in CRCA Strips that can be formed : 1 mm

Vertical distance between shafts : 80 mm

Horizontal distance between shafts : 175mm

Number of forming stations : 9 nos.

Vertical station : 7 nos.

Total HP for Line : 3(ABB)

Speed of the machine : 4mt/minute

Size of machine : 1600 x 800 x 1100 mm

Mandrel Uncoiler

Coil weight : 1 MT Max

Coil width : 90 MM

Coil bore : 450 MM min, 510 MM max dia.

Mandrel movement : Manually adjusted

Back Tension : Manually adjusted

[rollformingmachinery-blog]

Mcb Channel Roll Forming Machine

Mcb Channel Roll Forming Machine

We produce a high quality of the MCB Channel Roll Forming Machine. Which is affected using superior method, our in house drawing division helps efficiently in the keeping customer specific demand in mind.

De coiler 1 ton cap.

Entry Gate with

Roll Forming Line with 9 stations, 1 Gear Boxes & 2 H.P. electrical.

Control Panel semi auto

Cutting Unit

Technical Specifications : (Plate body)

Maximum…

[rollformingline-blog]

Mcb Channel Roll Forming Machine

Mcb Channel Roll Forming Machine

A) D coiler 5 ton cap. B) Punching press 20 tone 2 nos. C) Entry Gate with D) Roll Forming Machine with 14 station, 7 Gear Boxes & 10 H.P. electrical. E) Control Panel semi auto F) Cutting Unit (Hydro.)

TECHNICAL SPECIFICATIONS

Maximum sheet width that can be formed 350mm

Maximum sheet thickness in CRCA Strips that can be formed 3 mm(M.S.)

Horizontal distance between shafts 400mm

Number of…

[rollformingmachinery-blog]

Mcb Channel Roll Forming Machine

Mcb Channel Roll Forming Machine

De coiler 1 ton cap.

Entry Gate with

Roll Forming Line with 9 station , 1 Gear Boxes & 2 H.P. electrical.

Control Panel semi auto

Cutting Unit

Technical Specifications : (Plate body)

Maximum sheet width that can be formed : 55mm

Maximum sheet thickness in CRCA Strips that can be formed : 1 mm

Vertical distance between shafts : 80 mm

Horizontal distance between shafts : 175mm

Number of forming…