#Rubber Coated Pot Magnet

[hsmagnet]

Dia.42mm Eyelet Neodymium Magnet Clamping on Canvas

Dia.42mm Eyelet Neodymium Magnet Clamping on Canvas Diameter of pot base: 42mm Height of pot base: 8.8mm Height of thread base: 10mm Weight: appx. 100g Base Plating: Chrome Our fellow youtuber and very creative customer Steven Tang shared this amazing hack on easily setting up a canvas shelter attached to his van using just 4pcs of Dia. 42mm Hook Neodymium Magnets. Dia.42mm Eyelet Neodymium…

[wallymagnet]

Pull force test for Rubber coated magnet

info@wallymagnet.com WhatsApp: 0086 15257962734 www.wallymagnet.com

[tdipushpraj]

Essentials To Consider While Buying A Car Mobile Holder

Even though it is a good practice to pull over while calling or texting, the majority of people simply don’t do this and take the risk of using mobile phones while driving. Let’s be honest, we all suffer from Optimistic bias, commonly defined as the mistaken belief that one's chances of experiencing a negative event are lower than that of one's peers. To remedy this, you must invest in a universal car mobile holder for a car that’ll let you use your phone hands-free when you drive. Choosing the correct phone mount for a car can be tricky since the options are abundant these days. However, mulling over the following essentials will certainly make your decision for choosing the best mobile phone holder for car:

User-Friendliness

The car mobile phone holder must keep the device at eye level. If you have a preference for windshield-mounting, be certain the front visibility is not hindered. Based on the design you opt for, some double up as a wireless charger for phones too.

However, passive mounts will need to connect the device to the 12V electrical system of the car in order to charge the device. The holder must offer better ease of access to the device without covering essential buttons and ports. Moreover, it must let you put the caller on the speaker, without blocking the audio, for better call quality as you keep hands on the steering wheels.

Mounting and dismounting of the phone should be easy and not take too much effort. One-click release buttons help do this like a breeze, especially when you have to enter and leave your vehicle multiple times.

Universal Design & Useful Features

Car Mobile holders can be mounted on AC vent, dashboard and windshield mounts are the major three kinds of car phone mounts available in the market to choose from.

However, not every mobile holder is the same. A number of them are designed exclusively keeping in mind a particular Smartphone brand. Your multiple devices are in the small, medium or large categories. So go for a universal mobile holder for cars that can simply fit in every type of mobile phone with their cases. Such mobile mounts are totally adjustable to hold multiple brands of devices.

Do not miss to double-check the dimensions to be certain that you’ve selected the correct car mobile phone holder. There must not be any space left in the holder for vibrations.

There should be a tilt swivel to let you position the device in portrait or landscape viewing angle that suits you, which is very helpful to the ones who rely on navigation while driving.  

The zoom feature lets you bring the mobile closer to you for enhanced viewing quality and more privacy.

Durability

Since your key priority must be securing the phone, you must consider investing in a phone holder that is strong enough to hold the mobile in one place throughout despite pot-holes, speed breakers and sudden breaks. An ideal universal car mobile holder is usually made of high-quality rubber or ABS plastic material. It is sensible that you keep away from the holders that lose their suction strength during extreme hot or cold weather conditions.

If you use the back case of the device, you can still opt for a magnetic car mobile phone holder that’s fitted with a magnetic back plate. A rubber coating ensures neither your car nor mobile is damaged.

Now, let us take a quick look at some of the key features that the majority of premium universal phone mounts offer you.

Ultimate Handiness – Such phone mounts for car offer you with the flexibility of zooming it out four inches, rotating it for the full 3600, tilting it sideward up to 450 and pivoting it from one side to the other 1800 without any hassles.

Elegant Features for Safety – Since a universal mobile holder offers wireless charging as well, the top-rated manufacturers lay emphasis to design such products considering Safety First standard in mind. This is for the reason to ensure safety not just from the current surge, overvoltage, over-temperature protection but even from the extreme summer heat in the car as well.

Lightweight & Stylish – These car phone mounts are known for their lightweight body and take up minimal space in the car. Moreover, they are designed to look elegant on the dashboard. They can survive extreme weather conditions effortlessly and do not lose their suction power easily.

Interruption-free driving with a high-tech mobile phone boils down to picking the correct phone mount for a car.

Even though accessing a mobile phone while driving must be avoided at any cost, however, choosing the best cell phone holder for car will ensure safety, to some extent.

Have fun while driving yet remember to Drive safe!

[magnetic-holders]

Magnetic Products

https://www.magnetic-holders.com/products/

We(Ningbo Beilun Meank Magnetics Co., Ltd) manufacture all kinds of magnetic products(known as magnet assemblies or magnetic systems). Product series involves neodymium cup(pot) magnets for mounting and holding, ferrite cup(pot) magnets for mounting and holding, rubber-coated magnetic bases for mounting and holding, salvage fishing magnets, magnetic hooks(hook magnets), channel magnets(magnetic tool holders) and office magnets(including whiteboard magnets, magnetic pins, magnetic name badges). These magnetic products can meet many fields of application in production and life(such as holding&clamping applications,salvaging&lifting applications, installation&mounting applications, hooking&organizing applications). We not only manufacture standard magnetic products for worldwide users and distributors but also manufacture customized magnetic assembly products.

  The Reason Why Choose Beilun Meank

Meank Magnetics professional manufacture customized magnet assemblies for applications of clamping,mounting,lifting,hangsing and holding.High quality customize the following products: mounting pot magnets(include internal threaded pot magnets and external threaded pot magnets),male and female threaded rubber coated pot magnets,all kinds of magnetic hooks,salvage and fishing magnets ,magnetic tools and office magnets.

[adulttalk]

Apartment Checklist for Us Poor People

I recently reblogged this post and saw where someone asked for a poor people’s version, so here it is!

CLEANING

Dish soap

Laundry detergent

All-purpose cleaner

Hand soap you can use your dish soap

Broom

Mop

Wash cloths / rags

Vacuum not necessary if you don’t have carpet or you can just sweep the carpet

Dustpan

Lint roller have pets? Not really necessary if you don’t, if you’re in a crunch, use any tape

Sponges you can use your rags and a little elbow grease

KITCHENWARE

Plates

Bowls

Spoons

Forks

Knives

Glasses

Mugs you need two different types of drinking glasses? Nah.

Tongs you aren’t running a restaurant

Spatula

Plastic wrap never used this in my life

Ziplock baggies I’m sure you have tupperware

Garbage bags

Paper towel just use an actual rag

Tupperware

Ice tray

Oven mitts

Potato peeler never needed this, use a knife

Mixing bowls use a regular bowl

Frying pan

Pot

Baking sheet

Whisk use a spoon/fork

Stirring spoons / ladles again, use a spoon

Tea infuser ball what is this???

Measuring cups

Strainer

Cutting board

Coffee maker not necessary if you don’t drink coffee

Kettle I’m assuming this is for tea? You can use a regular pot to boil the bags in

Toaster put your toast on that baking sheet and stick it in the oven

Magnets

Dry erase markers

Sticky notes

Microwave

Wire sponge use your dish rags

Trash bin

Recycling bin

Rubber gloves

Silverware organizer

Measuring spoons

Aluminum foil

Wax paper you’ve got aluminum foil, it does the same thing

Can opener

Bottle opener not necessary if you don’t drink

Containers for salt, sugar, flour, etc. use the bags/containers they come in

LIVINGROOM

Sofa

Rocking chair (you know you want one)

Loveseat you really only need like one thing to sit on

Coasters

Blankets

Throw pillows

Coffee table

Book shelves only if you have a lot of books is this necessary

TV Netflix/hulu on phone, computer, etc.

TV stand

Floor lamp only need if you don’t have an overhead light

End table

Stereo system / radio none of this is super important and it can wait

BEDROOM

Mattress

Box spring

Bed frame I personally love the mattress on the floor look

Linens how are these different from sheets??

Sheets

Comforter

Hangers

Laundry hamper put your dirty clothes in the washer / only necessary if you do your laundry outside of your apartment

Trash bin just hang a Walmart bag on your doorknob

Curtains the windows should come with blinds

Pillows you only need enough for you and your partner if you have one

Pillow cases

Night table get like one or two of those $1 plastic locker crate things and stack them beside your bed and there ya go

Alarm clock Who doesn’t just use their phone?

Lamp only necessary if you don’t have on overhead light

Dresser only necessary if all of your clothes don’t fit in your closet / put undergarments in those same little locker crates

Coat rack

Desk / vanity

Comfy chairs

DININGROOM

Dining table just get those little tv dinner trays/tables from Walmart     and eat on the couch

Minimum of 2 chairs

Coasters

Placemat

Tablecloth

Tea lights /candles and candle holders

BATHROOM

Face clothes

Soap bar

Body wash

Shampoo

Conditioner

Tissues use toilet paper

Toilet paper

Plunger

Toilet cleaner

Cold, flu, pain, and allergy meds

Hydrogen peroxide

Antibacterial ointment

First-Aid kit

Tweezers

Nail clippers

Band-aids

Shower rod

Shower curtain

Toothbrush

Toothpaste

Floss

Period products

Bathmat step on a towel

Air freshener

Trash bin

Towel rod use the shower rod

Towels

MISCELLANEOUS

Elastic bands

Stapler

Stables

Paper clips

Needles and thread only necessary if you repair/customize your own clothes

AA / AAA batteries

Light bulbs

Extension cords

Scotch tape

Duct tape

Shovel

Rake (if you have a yard)

Stain remover

Jar of quarters for laundry mat

Screw drivers

Hammer

Nails

Sticky tack

Screws

Box cutter / X-acto

Pliers

Wrench

Pens

Paper

Pencils

Pencil sharpener

Eraser

Welcome matt

Shoe rack

Coat rack

Flashlight

Flashlight batteries

Watch batteries

Rechargeable batteries and charger

Safe place to discard dead batteries

Candles

Matches

Lighter

Mini travel fans

Real fans

Emergency Survival kit

Fire extinguisher

Landline phone

Window air conditioner

Carbon monoxide alarm should be provided by your landlord

Fire alarm ^^^

FOOD STUFF

Mustard

Ketchup

Mayo

Salt

Pepper

Baking soda

Flour

Eggs

Milk

Bread

Olive oil

Tea

Jam

Peanut-butter

Coffee grounds

Cereal

Rice

Pasta

Vegetable soup

Tomato sauce

Frozen vegetables

Crackers

Chickpeas / lentils

Apples

Oranges

Granola bars

Juice

Hot chocolate mix

Frozen meats

get what you’re going to eat/use

[doublerumnukacola]

Falling for you was easy...

(From chapter 9: Dying Twice...) 

The shopping trip went uneventfully. It wasn’t hard to get what they needed, after hitting up a few hardware stores. It almost felt like the days before the war, except she was replacing coupons with bullets.

They found a little alleyway near Diamond city that had a firepit and beds. Sole recognised the place, she’d cleared it out of Raiders months ago. It was surprising no one had moved in since then. Since she was here though, it wouldn’t hurt to install a few turrets to keep the neighbors from getting too friendly. She looked at her pip-boy map, and noted it’d named this place ‘Hangman’s Alley’. Not exactly a welcoming title.

“You think that’s enough magnets?” Sole asked, looking in her rucksack as they sat at their camp.

“If not, I’m sure we can pick up a few more from ’Dickhead’ City.” Hancock suggested. “Only as a last resort though.” He started a fire under the cooking pot. “What are you in the mood for, I take requests.”

“Well we got enough water from the last settlement we helped to make a stew… Mix some carrots, corn, and noodles together… But it will need some protein.” She looked through her bag. There was a dented tin of cram, but not much else.

“How does mirelurk sound?” She asked, getting up. Hancock looked at her incredulously, ready to object. “Yeah, too late, I got a taste for it now. Be back in 10 minutes, tops.”

“Hold it, Sister, you sure you want to take those on without backup?” He asked, starting to get up.

“Yeah I’m sure. Besides, you need to guard camp, get the stew ready, etc.” She argued. “I can handle a few crabs. Been doing it since college.” She chuckled at the joke that flew over his head. Hancock wanted to protest, but it wasn't worth arguing with a force of nature.

-------------------------------

She found a good perch from the second story of an old house that sat by the waterfront. She settled herself into position, looking down her scope at the waterfront. She could see a few soft shells guarding some eggs, a razorclaw nearby guarding them… But there was usually a Hunter around a cluster of this size. If she could find it away from the rest, she’d have some meat. Plus, the Hunters had a nicer taste, less bland.

She finally tracked one, the slight iridescence of its carapace made it hard to miss. She followed it with her crosshairs, watching it roam the perimeter of the nest, making mostly predictable paths. She just needed to wait for it to go out to the edge of the nest again, then she could take the shot.

There were footsteps on the floorboards behind her, but she kept her focus on the hunter. The steps got closer, the figure looming over her. She stayed put, took a breath, and made the shot. The mirelurk hunter explode into meaty chunks. She sighed, closing her eyes and rubbing the bridge of her nose.

“If you plan on killing me, go ahead. If not, I have dinner to make.” She said in annoyance.

“Well, mom always said I’d wind up in contract assassination.” A voice came from behind her. “But maybe not today, just got this disguise dry cleaned.” She started to disassemble her set up, from the stand on which she perched her rifle, and then the rifle itself.

“Lucky me.” She muttered. Deacon was leaning against a dilapidated dresser, blown apart from some disaster or another.

“You know, I get the feeling you don't actually mean that.” He observed. She slid all the pieces back into her rucksack.

“And I get the feeling you’ve been stalking us since we left HQ.” Sole said evenly. “So you know what we’ve been up to.”

“Scouring the waste land for microscopes and hot plates. A noble quest indeed.” Deacon noted. “Am I to assume it's all for our cause? The one you promptly shat on not 48 hours ago?”

“Not a proud moment.” Sole admitted, rubbing her eyes tiredly. “But I’m making it right.”

“No, you’re trying to bribe your way into our good graces.” Deacon said bitterly. “Pretty hard to take on the Commonwealth boogeyman armed with nothing but a gun and a positive attitude.”

“Who accused me of having as much as that?” Sole asked with an empty laugh. “Watch me do it with three well placed paperclips, a rubber band, and a turkey baster.”

“See who’s laughing when you are up to your neck in Gen 1’s and out of witty retorts.” Deacon cautioned. Sole walked past him and went to the stairs, carefully stepping to avoid the holes.

“Me? Run out of witty retorts? You’re Intel is worse than your disguises.” Sole spat behind her. He followed her down the stairs, his sneakers cautiously treading over each step.

“Oh now you’re just being mean.” Deacon said, hugging the metal banister as he made his way down. He tentatively made the next step, but made the mistake of putting too much weight on the rickety stair. There was a creak of wood, then a crack. Sole stopped. Deacon was frozen, one wrong move would send him into the debris below.

They both looked down, the floor was scattered with sharp splintered wood and broken metal.

“At least there's a soft landing…” Deacon muttered. Sole was quickly getting in the same situation, the steps she was on were groaning under her weight. She looked around, there wasn't much. She looked at the bannister Deacon held onto. It was rickety, but the enameled metal went all the way to the ground. Safely over the debris.

“Hey Deacon, you ever think about sliding down the railing when you go into a metro? Or a broken escalator in a Fallon’s department store?” She asked, grabbing onto the bannister to secure it more.

“Now is really not the time to-” Deacon started, but a crack of wood shook him and he leapt onto the banister, propelling himself down as fast as he could until he fell off at the bottom, collapsing to the ground. Sole sighed in relief.

Then there was another crack. She felt the floor fall away beneath her, sending her tumbling down into the debris. She slammed against the splintered wood, feeling the shards drive into her skin. She cried out, the sound almost crushed out of her throat on impact, before her body rolled to a stop on a fractured slab of cement.

She was in shock, her heart was pounding, ears buzzing with white noise, vision fuzzy… Could she still move? At first there was nothing, her limbs stayed limp on the ground. She couldn't move. Terror gripped her, she was paralysed. Then it came back to her, her mind remembering how to move her body. She tried to sit up, but the shock that had been numbing her suddenly lifted. She gasped, a deluge of agony rippling through her. Her ribs were very very broken. She lay on the slab, trembling with pain, trying to stifle the tremors with short breaths, closing her eyes. She had survived raiders, gunners, super mutants, and particularly spirited radroaches… And now she would die to gravity, that most cruel Mistress. If she could still laugh, the building would have rung with the sound.

“Hey Charmer, buddy, talk to me…” Deacon called down. She almost smiled at his voice. Almost. At least if she died here, he would tell it as a more interesting end. She tried her best to respond through the pain.

“That… That’s… Going to bruise…” She called back weakly. She coughed, there was a lot of dust in air now, made it a little hard to breathe. Fractured bone digging into her lungs made it difficult as well.

“Don't scare me like that!” Deacon called, looking for a safe way over to her. Cement and rebar blocked most of his path, but if he could squeeze through, he could check on her.

Then there was a scuttling sound behind him. The Mirelurks nearby had come to inspect the commotion. Deacon scanned the surroundings, the crabs were making their way quickly from the waterfront, but didn't seem to have spotted them yet.

He didn't have much on him, but he did have the vodka bottle Sole had left him, the shirt on his back, and most crucially a lighter. But he only had one of each.

He quickly assembled a molotov, stripping off and stuffing the whole shirt into the bottle.

He took a breath, lit it, and lobbed it as far from the building as he could, landing with an explosive crash on the other side of the street. He held his breath. The scuttling stopped.

The creature inspected the scene, before returning to the nest, its curiosity satisfied. Deacon took a breath. At least that crisis was averted.

He returned his attention to Sole. If another Mirelurk came near and found her, she was as good as dead. If she didn't get a stimpak soon she was as good as dead. If her wounds weren't tended to soon, she was as good as- Actually he hadn't heard anything from her. She could be dead already.

Deacon carefully made his way through the cement and rebar, and tread over the splintered wood to where she lay. He stopped as soon as he saw her. Her face was pale, it took him a second to notice it was from the concrete dust, coating her hair and eyebrows, as if she’d been there for years. Her eyes were closed, and her breathing was laboured. Blood seeped down the stone slab she lay on, dripping into a puddle on to the dusty ground. The splintered wood she’d hit was lanced into her side, soaked with blood. For once he was speechless, and a little nauseous.

“Still… Alive…” She managed, trying to move, but wincing in pain. He knelt beside her. “Just… Resting…” He couldn't move her, not by himself. He’d cause more damage even attempting.

The kindest thing to do, would be to end her now. If he could.

She knew what he was thinking. She knew him too well. The least she could do was give him enough time to do it.

“Tell… Me…” She whispered quietly. He leaned close to hear her. “... A… Story…” He held his breath. It was the only thing he was good at. He sat up beside her, clearing his throat. It was the least he could do for her.

“I ever tell you about the time I sailed to Greenland?” He started, keeping his voice quiet in case of hostiles. “Meant to just sail up the coast to another Railroad outpost, but time and tide had other ideas…” He looked down, she stirred a little. “Tell you what, if you think the Yao-gui are bad here, you try a polar bear. Big as a deathclaw, and twice as deadly.” She just kept breathing, he couldn't even tell if she was awake. “Heard that one, huh? Yeah I figured. How about this one.” He swallowed, trying to quietly clear his throat. He took off his sunglasses so he could take one last look at her. Without the filter, she looked so much more feeble, he could see all the cuts and bruises on her face. She was in so much pain...

“This story is about… A Vault dweller.” He took a deep breath before continuing. “She woke up in a barren hellscape, having lost everyone she ever loved, and set out to make it right. This Vault dweller, from the time they woke up, had a second shadow.” He paused, gauging her reaction. Still nothing, but he continued.

“This shadow had noticed a lot of activity by the Bad guys around this Vault dweller, lots of coming and going. So when she finally came out, the shadow had to watch them. He wasn't sure if she was going to be good or bad, so he kept his distance. But he watched her help innocents, and rebuild lives. He watched her desperate and helpless, looking for her only child.”

He took another breath, steading his voice. He had to finish the damn story. He owed her that and so much more. “One day, he started the Vault dweller on a path to find him. A clue here, a hint there… And she did. He stuck to her after that. And he got to see up close all the good she did. But there was more than that. He watched the way she collected keepsakes from their adventures, and always read through the terminals and notes left behind by the old world she’d come from, even though she knew they didn't have a happy ending. The shadow asked her about that, she said they deserved their last thoughts to be heard. Ain't that something?” He coughed, trying to keep his voice from breaking. It might have been the light, but he could have sworn her head was tilted towards him now… He couldn’t believe the last thing she wanted to hear was his voice...

“And the shadow ended up opening up to her. Ended up spilling all his big secrets. Or at least, some of them. He kept the most important ones for himself. And that was where he went wrong.” He leaned back against a jutting piece of rebar. “He kept the most important secret to himself… The Shadow helped her kill a killer, and then she kissed me…-The Shadow, I mean… and he… He pushed her away. Then he wonders why the Vault dweller doesn't want to see him anymore. But he couldn't help seeing her.”

He closed his eyes, reaching for his silenced pistol. She deserved better. “And even after all that. All the lies, and the rejection, and the heartbreak… She still risked her life for his. Even though the first thing he tried to tell her was ‘don't be a hero’. But then, when did she ever listen to him…” He clicked off the safety. He watched her chest rise and fall unevenly, pain in every breath. He was drawing out her suffering for his cowardice. He took a breath. “Good talk, Charms…” He lifted the barrel to her skull.

Then he heard a voice, raspy and desperate.

“Sole! Where the fuck are you?” Hancock hissed, walking slowly outside the building, only a few feet away from them. “Sole, c’mon, I don’t even like Mirelurk!” Deacon couldn't believe his luck. He stashed away the pistol hurriedly. Hancock was already moving further down the street, still calling out quietly for her. Deacon knelt down beside Sole so she could hear him.

“Stay with me Charmer, if you see a bright light and hear your grandmother’s voice calling you, tell her to fuck off. You still have business here.” He whispered quickly, before taking off after Hancock.

-------------------------------

Continued on ao3

[maggienano]

Parylene coating Provides stability Protection for LEDs

Through several years of development, LED has moved from some specific applications to many types of standard lighting applications. Due to its high reliability, energy saving and high quality and low price, LED technology is used everywhere in various fields across the country. To ensure their long life, LEDs often require some form of protective coating. Parylene coating can provide UV and thermal stability protection for LEDs.

Many liquid paints can distort or darken light due to the thick and uneven nature of liquid coatings. Simply put, whatever coating is used to protect the LED must make the LED's true color shine brightly. In addition to possible distortion, however, coating non-uniformity can add voids that create unnecessary pathways for moisture to penetrate the board, leading to premature failure. In wet environments, harsh weather conditions, even with daily cleaning, LEDs must withstand the usual humidity. Premature failure of electronic functions can quickly jeopardize the lifespan of LEDs and impact cost savings.

Many conformal coatings lose critical performance characteristics when exposed to UV light. For LEDs, the coating must not become yellow or brittle when operating in a UV-rich environment. Not only does this decay increase the likelihood of light distortion to the LED, but it also provides a path for moisture to penetrate the interior through the coating, causing premature failure. Thermal cycling can damage thicker coatings due to expansion and contraction when exposed to a wide range of extreme temperatures.

(Parylene) conformal coating is a good alternative solution for heavy liquid coatings and potting materials. It is very thin, lightweight and has good moisture, chemical and dielectric barrier properties. In addition, Parylene offers unparalleled stability in high temperature and UV environments, providing greater protection for LED applications.

Parylene is the name of a family of polymers, an organic coating material. They are polycrystalline and linear in nature, have good dielectric and barrier properties per unit thickness, and are chemically inert. Parylene is a molecular-grade polymer that provides ultra-thin, optically clear, conformable coatings regardless of the size or complexity of surrounding components.

Parylene is applied by vapor deposition, eliminating the need for dispensing, spraying, brushing or dipping. The part to be coated is placed in a deposition chamber with a powder feed called "dimer" in an evaporator located at the other end of the deposition system. Heating the dimer causes it to sublime into steam, and then heat it again to break it down into the vapour of monomolecular structures. This vapor is delivered to a room temperature air chamber where the dimer spontaneously polymerizes on the coated part to form a thin film of parylene. The parylene coating process was carried out in a closed system with controlled vacuum, and the deposition chamber was kept at room temperature during the deposition process. There are no solvents, catalysts and plasticizers in the coating process.

Because there is no liquid phase during deposition, no meniscus, pooling, or bridging is visible for liquid coating applications. The "growth" of parylene coating molecules not only forms a uniform conformal coating of a specific thickness, but also penetrates into every crevice, since the film is formed from a gas, independent of the inaccessibility of the coated part, guaranteeing complete encapsulation of the substrate.

Maggie Nano Technology (Suzhou) Co., Ltd. provides customers with high-quality Parylene coating services for supporting automated intelligent equipment. Parylene coating technology has been widely used in aerospace, new energy vehicles, circuit boards, magnetic materials, sensors, silicone rubber, seals, medical equipment, rare cultural relics and other fields. We are looking forward to working with you!

[rishengmagnets]

Rubber Coated Magnets

https://www.rishengmagnets.com/products/rubber-coated-magnets.html

Rubber coated magnets (also called Plastic coated magnets) are consist of neodymium magnets or pot magnets with a protective layer of rubber coating, generally, soft TPE rubber coating, while hard PP coating is also available (also called plastic coated magnets) if required.

 As a reputable rubber covered magnet manufacturer, we can apply rubber coating to magnets in different shapes, no matter standard disc, block, ring or countersunk, arc segment, or more complicated shapes, the rubber coating can cover all sides of magnet or part of the magnet, it is very hard and durable, protecting the magnets against from corrosion and damage.

 Types Of Rubber Coated Magnets

 Magnetic Grippers

 Rubber Coated Pot Magnets

 Rubber Coated Magnets

 Colorful Rubber Coated Magnets

 Manufacturing Method Of Rubber Coated Magnets

The rubber coating is produced by an injection machine, we need to open an injection mold for a specific size, we do have a mold for standard sizes, but if a new mold is required, the mold cost is about $1,000-$2,000.

 Generally, the rubber coating is black, but different colors are available if the MOQ is reached, it does not require a new mold for specific colors.

 The rubber coating is about 0.5-1mm thick, it is much thicker than other coatings, you need to consider this when you design the magnet, the actual magnet size inside is 2mm less than the total size.

 Applications Of Rubber Coated Magnets

Rubber coated magnets won’t break like a normal magnet and can be used in outdoor applications, like humid and rust area, marine (seawater) environmental, rough surfaces, this magnet greatly broaden the magnet application ranges. It is protective for both the surface where the magnets are used and the magnets themselves, it won’t leave any marks and damage from scratching if you want to use a magnet on a surface easy to hurt like a car, rubber-coated magnets are a suitable option. 

[hsmagnet]

Neodymium Rubber Magnets Cable Holder Dia. 22mm

Neodymium Rubber Magnets Cable Holder Dia. 22mm Specifications: Diameter: 22mm Base Height: 6mm Overall Height: 13mm Cable Tie Slot: 5.2mm Rubber Neodymium Magnets Cable Holder Dia. 22mm These rubber coated magnetic cable holders are water resistant, can be use both indoor or outdoor. The added plastic cable tie holder attachment makes these neodymium magnets multipurpose, just slip a regular…

[yearmag]

D22mm rubber coated mounting magnets are on sale. If you are interested, please don't hesitate to contact us.

Mob.: +86 13788948880 (WhatsApp / WeChat)

Mailbox: info@yearmag.net / yearmag@hotmail.com

Skype: gloresource

[meankmagnet]

Flat Internal Thread Rubber Coated Pot Magnets

Category: rubber coated pot magnets/ rubber coated holdingmagnets/ internal thread rubber coated holding magnets/ internal thread rubber coated pot magnets/rubber coated holding magnets with internal screw thread

 Advantages: waterproof magnets, soft surface, strong magnetic force

Items Code

D(mm)

H(mm)

Thread M

MagneticForce N

Color

Weight( g)

RCIND22

22

6

M4

38

black

9

RCIND31

31

6

M5

89

black

21

RCIND43

43

6

M4

100

black

29

RCIND66

66

8.5

M6

250

black

100

RCIND88

88

8.5

M6

550

black

186

Rubber coated pot magnets also called as rubber coated holding magnets.Rubber coated pot magnets are used on the surface where it is easy to be scratched when used a normal pot magnets on it. Rubber coated holding magnets are an ideal holding magnets for the surface where it is easy to get wet or work in humid conditions.

 Each rubber coated pot magnets composed of 6pcs disc neodymium magnets, which make the rubber coated holding magnets multi-pole structure.The special magnetic structure ensures the powerful magnetic field on the holding magnet surface. So that the holding magnets can work well on the surface of the thin metal.

 The disc rubber coated magnets on this page are with an internal thread, which can wring hook or eyebolt. After screwed with hook or eyebolt, the whole rubber coated pot magnets can be used as hook magnets to hang objects on the metal body where the surface is painted.This kind of rubber coated holding magnets can be moved arbitrarily.

https://www.meank-magnet.com/products/holding-magnets/rubber-coated-pot-magnets/internal-thread-rubber-coated-pot-magnets.html

[mpcomagnetics]

MPCO Customer Send Magnet Inquiries

MPCO Customer Send Magnet Inquiries

MPCO Customer Send Magnet Inquiries

The following of some customers’ inquiries about magnetic components and permanent magnets:

1 I am looking for a quote for 36000 of the rubber coated magnets.

2 I would like to get a quote for Magnet D4X2.5 axially polarized. Is it possible to get some samples too?

MPCO Customer Send Magnet Inquiries

3 Hello Hr. Eric we has telfoniert this arranges her/it/them…

[rishengmagnets]

Pot Magnets

https://www.rishengmagnets.com/products/pot-magnets.html

Pot magnets (also called Cup magnets, Mounting magnets) are consist of magnets encased in a steel cup, the inside magnet can be neodymium, smco, alnico or ferrite, you can choose the most suitable material according to where it will be used.

  The case can be steel or stainless steel, the steel cup not only protects the magnets against chipping and cracking, it generates an efficient magnetic circuit, all the magnetic fields are centralized one one side, which makes the magnetic force much bigger than magnet alone. As a reputable cup magnets manufacturer, RiSheng has various high quality rare earth pot magnets for sale. Our factory supplies customized ones, such as cup magnets with countersunk hole and rubber coated shallow pot magnets, to satisfy every customer.

 Types Of Pot Magnets

 Pot Magnets PM001

Pot Magnets PM002

Pot Magnets PM003

Pot Magnets PM004

Pot Magnets PM005

 Custom Pot Magnets

 Manufacturing Method Of Pot Magnets

The magnet and steel are glued together, with a channel filled with plastic ring or epoxy, the steel cup is punched or lathed depending on the size, a lot of improvements are done to achieve both a higher magnetic force and more economic price.

   The pot magnets are supplied in different fixing ways with studs, female studs, holes, and hooks as above, a lot of mechanical parts can be fixed on pot magnets to meet different applications. The rubber coating is also realizable on pot magnets to protect the surface easy scratching and easy damage.

 Applications Of Pot Magnets

The magnetic force of pot magnets is very strong, so they are widely used for heavy handling duties, it is quite safe due to it is permanently magnetic, a complete series with different fixing methods and sizes are available, you can easily find the way to fix them, due to these conveniences, it greatly broadens the applications of pot magnets both in commercial and industrial, like industrial working room, office, store, and home.

[hsmagnet]

50 x 50 x 25mm thick Rubber Coated N42 Neodymium Magnet with 8.2mm dia Countsunk Hole

50 x 50 x 25mm thick Rubber Coated N42 Neodymium Magnet with 8.2mm dia Countsunk Hole

50 x 50 x 25mm thick Rubber Coated N42 Neodymium Square Block Magnet with 8.2mm dia Countsunk Hole 50mm x 50mm x 25mm thick with a 8.2mm diameter countersunk hole on either side for fixing. Excellent 84kg Pull. Rubber Coated. Can be fixed in place with a countersink screw. N42 Grade Neodymium. Excellent resistance to demagnetisation and corrosion. This magnet is little larger than a block of…

[weizhongmagnetics]

Magnetic Hooks

The earliest model is the ferrite flat pot magnet with hook, white powder painted, starting from which this group has been growing steadily as customers liked this product and wanted it to fit better into their work so there have been modifications, updates on the original one.

 Magnetic Hooks for Sale

NdFeB Flat Pot Magnet with Hook

NdFeB hook magnet has strong holding force ranging from 3kg up to 105kg with the increase of its size which offers choices to meet various demand situation.

 NdfeB Deep Pot Magnet with Hook

NdFeB Deep Pot Magnet with Hook is the best for small-sized magnetic products with maximum pull strength. The actual pull force and sizes is customizable to meet various demands.

 NdFeB Flat Pot Magnet with Eyelet

This is a NdFeB(neodymium) pot magnet with an eyelet, which can be removed whenever necessary. Having it attached to steel surfaces, it could hold objects steadily.

 NdFeB Flat Pot Magnet with Hook, White Powder Coated

These neodymium pot magnets have white powder coating that makes them more decorative. The white powder coating is different from normal paint.

 NdFeB Flat Pot Magnet with Eyelet, White Powder Coated

This white NdFeB pot magnet with an eyelet can be fixed on white walls, ceilings or other steel surfaces for window displays in stores.

 NdFeB Flat Pot Magnet with Hook in Different Colors

These neodymium pot magnets are often packed in sets of four, six with different colors. Tell us your favorite color and we will make them as you like.

 Ferrite Flat Pot Magnet with Hook, White Powder Coated

Our White Powder Coated Ferrite Flat Pot Magnet with Hook is excellent for holding things on white walls, ceilings or other steel surfaces with a steady holding force.

 Ferrite Flat Pot Magnet with Hook

These ferrite hook magnets are widely used for hanging. Their holding force is lower than NdFeB hook magnets, but they are an economic choice.

 Ferrite Flat Pot Magnet Hook in Different Colors

​These Ferrite pot magnets are often packed in sets of four, six with different colors, which is perfect for hanging or holding objects as decorative magnetic hooks.

 NdFeB Channel Magnet with Hook, White Powder Coated 1 Inch

Click to know more detail about NdFeB Channel Magnet with Hook, White Powder Coated 1 Inch

 Ferrite Channel Magnet Hook, White Powder Coated 1 Inch

​Our Ferrite Channel Magnet with Hook is available in various shapes and sizes, offering great performance for holding or hanging objects steadily, perfect for home, kitchen, workplace, office, and garage.

 NdFeB Memo Magnet with Notch

These brilliantly designed NdFeB memo magnets are used on whiteboards, fridges and memo-boards for attaching notes, messages, documents or any kind of paper in offices, classrooms.

 Ferrite Flat Pot Magnet with Rotating Metal Hook

The hook is not fixed in position but can rotate around the center offering great flexibility.

 Plastic Cased Magnet with Hook

These plastic cased ferrite hook magnets with elegant white appearance can be fixed on steel ceilings or other steel surfaces for hanging purpose with decorative effect.

 Plastic Cased Magnet with Eyelet

These square shape plastic cased ferrite hook magnets are decorative with their elegant white appearance.

 NdFeB Pot Magnet with Swivel Hook and Rubber Cap

The rubber cap can be taken off for higher holding strength, or, put on for surface protection. The hook is mounted on a central bolt which is fixed on the magnetic base in a way.

 Ferrite Pot Magnet with J Hook

These Ferrite hook magnets consist of a ferrite pot magnet with a handy hook. Ideal for hanging a variety of items.

 Ferrite White Powder Coated Magnet with Swivel Hook

The central bolt, where the hook is mounted, is a rotating one that can turn 360°.

 Fishing Magnet

What makes the best magnet for magnet fishing? This is how we see it. The best fishing magnet neodymium have a reinforced stud.

 Double Sided Fishing Magnet

​This magnet makes the best magnet for magnet fishing, which has double magnetic faces. The Neodymium fishing magnets are amazingly powerful for their size and have innumerable uses.

 Application of Magnetic Hooks

Actual applications of each product itself could be different depending on their shapes, sizes, forces. You can find more on detailed product pages.

 Having hook, as a common property that they share, these products are easy to hang and this is also what most applications are extended from.

 Magnetic Hooks FAQs

 What is the seven types of Pot Magnet are available here?

Pot Magnet with External Threaded Stud / Boss Mounting

 Pot Magnet with Internal Threaded Mounting (Deep Pot)

 Pot Magnet with Countersunk Mounting (Shallow Pot)

 Pot Magnet with Through Hole Mounting

 Pot Magnet with Internal Threaded Stud / Boss Mounting

 Pot Magnet with Threaded Through Hole Mounting

 Rubber Coated Magnetic Pots

 Round Base Magnet

 How does a pot magnet differ to a regular magnet?

 Multiple Choices in Force

Our magnetic tool hooks come in various shapes, sizes, colors and forces. We mainly use Neodymium magnet and ferrite magnet on our magnetic hanging hooks, which enables us to make these parts with plenty of choices in holding force so that what users need to do is to search and compare to find out the one with most wanted force.

 Various Shapes, Sizes

Our magnetic hooks began from flat round ones with diameter from 16mm to, so far the largest, 100mm. Later on, cylinder shape magnetic hook came out, square shape magnetic hooks came out etc. By now, we have round, square, cylinder versions in shape. Hooks are fixed or rotatable. Hook sizes are adjustable.

 Different Colors

In addition to silver color and white color we have other options of colors on these magnetic hooks, such as red, green, black, yellow etc. Colors are in accordance with standards like Pantone, RAL. We use powder painting for the colors, which, comparing with regular paint, has the advantage of being more durable and stable.

 https://www.weizhongmagnetics.com/products/magnetic-hooks/

[yearmag]

D31mm rubber coated magnets are available with male thread, female thread and protruding thread. If you are interested, please don't hesitate to contact us.

Mob.: +86 13788948880 (WhatsApp / WeChat) Email: info@yearmag.com / yearmag@hotmail.net Skype: gloresource