#These first started off as one-off sketches but with some polish here they are hehe

[reksink]

Two Fools, One Freed One Chained

[riinkun-art-stuff]

Howdy ho! I'm very excited to finally be able to share this illustration I worked on as part of this year's @bumblebybigbang for @tahnex's lovely and super fun fic (with no pain attached whatsoever), "Of Dragons and Panthers," which you can read here! As soon as I read the original notes on it this scene captured me so much I had to do something dramatic for it. It's been such a pleasure watching the whole collab come together, tysm for having me!

First time joining an event like this, and I'd love to again if the opportunity comes around hehe. Still a few postings to go on this one, the pieces before us this year have knocked it out of the park and I'm super excited to see the rest once they come around!

Made a few process cuts just for fun, which I left under the cut!

I did do a few sketches roughly before I started out, especially based on other parts of the chapter, but this particular composition was so fixed in my mind that I ended up just sticking with it. In retrospect, I would've loved to go back and do some more thorough exploration for it. Here are a few of the sketches I managed to fish back up:

I also was thinking of trying a few other doodles/another big piece, but ended up not really having the time between other obligations :')

And the sketch I finally settled on:

Inking was SUCH a fun process on this piece in particular. I'm a huge fan of how dragon!Yang's mane turned out, especially, and all the detailing on the head and around Blake's fur and such. Feel like I'm really satisfied w the particular way the line weight variations came out, and it's where the piece shines the most imo.

Panther!Blake, too. Oh gosh. I feel like it took me a lot of reworking to get her structure to a point where she felt very leopard-like, rather than any other type of big cat- especially around the head.

Colours were such a challenging part. There was a big feeling I had for that glow coming off dragon!Yang in the middle of the heavy rain- I love seeing that sort of effect in real life so that's something I'm really hoping to work to capture better as I practice. Trying to get dragon!Yang's slight iridescence in there and to balance out the lighting on panther!Blake's fur each took a long time, too- I'm only a pinch sad that a good chunk of it is covered by other lighting effects XD

Blake's rosettes were SO fun. Augguhugg.

In terms of backgrounds. HOO boy I was going through a strange patch in life while working on the background and final polish for this piece, which is why (at least I feel like) it looks kinda rushed. I have been practicing natural landscapes and doing some observational studies but still struggling to get those rock shapes quite right, which I think is a big make or break point of something like this. I did really enjoy toying around with inking on the foliage and foreground layers of the ground, though! And in the end, lighting and effects ended up masking a lot of the big weak spots :D

I think natural effects like smoke/steam, and rain, are big things that I got to practice more of in this piece, but also really would like to get better at in future. Esp since I feel like it's been a great opportunity to mess around with different colours and brushes that I use way less, which I'm always grateful for w painting. I think just layering the rain on its own ended up being about 10 odd layers?

I think the only other thing I would have loved to improve is to just help the piece feel more Bumbleby™ in the final look. I think I like the cool colours of the lighting for this particular outcome, but I also would have probably tried to have made things much clearer (ahem at the very least switch to yellow/purple) in the long run in terms of representation and resemblance. Ik that at least for me it is fairly easy to associate the two characters with dragons and panthers since I'm more familiar w the fandom lingo around these two, but esp for outsiders I feel like it's probably not great at conveying who they are, and why they are potentially in this situation.

I'd also love to try and find a shading style that still has a painterly quality but compliments the inking a bit better, rather than overpowering it.

I think that, on the whole, I am pretty satisfied with the piece and had a great time working with Tahnex on the whole collab! And I've also has a fun time reading his work and notes in return, and thank you so much for being so so patient with me even as my updates were slow n rocky at points :'D

That's about all I got, have a great day y'all! Still a few big bang postings to go, so very excited for those once they come around!

[cow3survivor]

Ep. 9: “Break Down Everything I’ve Built” - Jennet

JENNET

not to be rude but i hate this cast.... me winning immunity didnt even matter bc my bestie got booted tf...

(a little later)

feeling alone, im not even on a tribe anymore. im alone now not furcifer calumma or brookesia, just jennet

(after eating rice)

i know i sound dramatic asf but ffft i was so uneasy starting this game and i didnt feel comfortable or didnt feel excited to play until i started playing with ethan so i guess i relied too much on him but its like... now what?? where do i go from here? like sam, sammy, jones, and mikey voted to keep him so its like... here i am with low numbers again

(after taking a dip in the ocean)

immunity doesnt feel so good when ur number one ally gets sent home...

(after polishing the immunity necklace)

realizing that tonight ive been on the wrong side of both of votes so now im... reevaluating my position in this game. i have to break down everything ive built and start over and see who i can really trust right now

JONES

https://youtu.be/GY0DufoCyLE (after live night)

LOVELIS

So today's been way more eventful! I've had a great conversation with Jennet finally & got caught up on all the live night stuff, thought it was just a live competition that I wasn't able to attend but then I woke up to Ethan being gone LMAO but oh well! I've been targeted the past two rounds but I'm still here so I've just gotta work my options as best I can, and right now I do wanna with with Jessica the most. Apparently Shane put in a lot of work to keep me during live night & I'm thankful but earlier when I tried to talk to him he wouldn't divert from that point & it was a little awkward.. like idk what you want me to do about that... so today's mostly been catching up with the people who I haven't heard much from like Jake, Lindsay etc and seeing where their heads are at, I need to be more involved in something big if I'm gonna be seen as a potential winner should I make it to the end so I'm definitely not shy of jumping ship from Sharon and tryna make something better for myself with the people that voted for me hehe.. 😳😈

JENNET

looking at the memory wall and im feeling very: vulnerable

LINDSAY

12/19 - https://drive.google.com/file/d/1Q_KxHilwOebD8G3D8JAZsOMKdgsxFp-b/view?usp=sharing

JESSICA

I know in my last confessional I said I was close with Ethan. After I wrote that, I realized that he was a lot closer with other people than he was with me. Lindsay accidentally added him to an alliance chat and I expected him to freak out in my DMs (or at the very least ask me about it!) since we're supposed to be such good allies. But he didn't say anything! Shane said that he did get an Ethan freakout so I was like hmm... noted. Ethan likes Shane more than me so I am okay to vote him out a lot earlier than I was planning. Ethan also left out a LOT of information about the idols when we talked about them so I instantly knew at merge that he was hiding things from me. When we did that round robin conversation thing, I got Shane early on (I think he was the third person I talked to?) and he pitched voting Ethan which made a lot of sense to me. Plus I was a little worried Ethan could have had the Furcifer idol since he found that Brookesia one so fast. I figured if we were going to make a big move, that was the time to do it because if anyone was suspicious I could just pretend the whirlwind nature of the round was the reason they didn't know what happened. Speaking of idols!!! I'm 95% sure that Furcifer idol is in Sam's pocket. Shane had a vote extort power which he could play on anyone; it would force them to either reveal their entire voting history to this mysterious person OR they would have to give up their vote and sit out of immunity. I guess the vote part isn't public but the immunity part was and for some reason, Sam chose to not reveal his voting history. To Shane and Daisy, who don't know how the idols worked, this is a weird choice. But to me there's only one reason someone doesn't want their voting history revealed and it's because they didn't vote at a tribal which means they have an idol. Shane originally wanted to play the power on Mikey which I strongly did not want because 1) I already know how Mikey has voted and 2) I was pretty sure Mikey didn't have an idol so it's unlikely there was a tribal he didn't vote in and 3) If Mikey asked me about it, I didn't want to lie but I also didn't want to expose Shane. The question is.... does Sam's idol still work? If I had found the idol when I knew there was an easy boot on my team (he has to have found it before Pennino left), then I would have gambled as long as I could have to get the idol to work. My guess is Sam's idol goes until... f7? Maybe f6 or f5. Pennino probably left 3-1, not 4-1, but Sam's missing vote didn't matter because it was unanimous and wasn't read. For this round, right now everyone is probably voting Lovelis. It's the easy vote because he isn't here but personally I don't want to do that. Everyone says Lovelis is inactive but he isn't inactive to me and as far as I know, he is not going to flip on me and thinks I've been looking out for him. Which I have been! Also Lovelis cannot have an idol unless he somehow got the merge one. So to me it's like.... why not take out someone like Sam who (probably) has an idol? Or at least get him paranoid enough so he plays it. He seems like the kind of player who could easily stab me in the back so I'd like to get him before he gets me. Right now my tightest alliance is with Shane/Daisy, though I definitely talk about the game with Shane the most. However I also have good relationships with Lovelis, Sammy, and Mikey. I think Jennet and I are getting along well because as far as I know, I was the first one who told them Ethan's name was going around last time when everyone else seemed too afraid to tell them. They were not into that plan at all but I'm glad that I was honest with them because I don't want that to be a closed relationship at all! They also don’t seem to have a tonne of connections so they’re someone I'd like to keep close. And then Jones/Lindsay/Jake are people who I'm still getting to know but I do trust them.... a bit. I don't see that alliance of 6 lasting long term however I don't mind trying to stick with it to get Sam out before it disintegrates. I also think Shane is coming across as a threat which is great to me. I hope people don't think we're close because I really want to keep that relationship hidden. My entire game is about having everyone think they're my #1 (or at least my #2 or #3) so that they are less likely to leak things I tell them, less likely to vote for me, and more likely to look out for me. Information is power so I try to be in a position where I'll get as much of it as I can. So far it is working! I think. This is truly an essay

(a little later)

Oh also I never get episode titles in games so here are some: "Any way you slice it, it's Survivor madness!" "What a night, what a vote" "Please don't invite me to your messy party" "Social game is on 0!" "Survivor brings out the worst in you" "I'm a chameleon" Some of those are things other people said in other games but... oh well!

JENNET

apparently lovelis is rallying the troops to get them to vote for me bc i voted him out over madison... babe we NEVER spoke, and i spoke to madison ALOT why would i not vote u ? tf... its getting weird

JESSICA

LMAO IGNORE THAT LAST CONFESSIONAL That is not how the advantage works at ALL I now totally understand why Sam rejected it That’s so funny that we really read it that wrong.............. I love reading and comprehending the words that I read Still don’t know where that last idol is but this is so funny.

JENNET

so right now the only people i can trust are sammy, sam, jones, and mikey. i want to trust jake but hes in an alliance with jones, lindsay, daisy, shane, and jessica that he didnt tell me about. jones is playing double agent right now and the only reason i dont find that sketch is bc she told us info that she didnt need to. i will say me and jake had a convo about how we dont trust how shady lindsay has been and we wont target her until most of the og brookesia members are gone. im very scared right now but also very angry

(a little later)

had plans for this vote but sam got his vote taken away. im waiting to see what pops off at tribal/ the few hours before tribal before i can try to get the little band of misfits to settle on who to target first. so far its daisy and shane, i’ll try to sneak lindsay in but honestly i want daisy gone first bc shes hosted me and seen how i play and thats too much of an advantage. she’s dangerous to me and my game

JAKE

https://youtu.be/nZPMXTthz9Q yes I'm becoming paranoid and what?? say it to her face

JENNET

my dream boot order after this round (if lovelis is who goes): daisy shane jessica lindsay and then everything else can fold around itself but ideally jake is next to go

LINDSAY

videos r still uploading but here's my quick tea for this episode: feels way too easy to vote lovelis, keep expecting things to blwo up bc lovelis is throwing jennet's name out there. game way too quiet. shit aint right but i aint know whats wrong. i may be paranoid

JENNET

:ETHAN: ❤️ :JENNET: hours

SAMMY

so I feel like so much happened in this round? let's recap the live night and dive into our thoughts and feelings about where we are right now. So starting off after Madison is voted out, the plan throughout the day was to just vote out whoever stayed out of Madison/Lovelis, right? Okay so I go into this live event thinking that's the plan...not sweating...just chilling right? right okay so I get to talking to people and then I get in a chat with daisy who is my 3rd phone call? Then I hear of this plan to get rid of Ethan?? In my head I was like...blinks...okay so why are we doing this like what is the point y'all are being too complicated. So fast forward Ethan goes home. Then Jones lets me know there was a separate group made before tribal of Jake/Shane/Jones/Jess/Lindsay. Apparently all the people who voted Ethan? This actually pisses me off not gonna lie because I opened the door for a conversation hinting that I knew of a group to daisy/jess/Jake and none of them spilled to me. So I caught them in a lie and it lets me know that they are serious about that group of people and that alliance means something. I thought I was close to daisy and I thought she considered me her #1 ally but the info I have been getting really makes me trust her less. She was working on the idol/bridge with like so many other players which makes sense to how she was able to find so many powers. I feel used. She is close to Shane and it is obvious. I also 100% feel as if the Ethan plan was made before tribal or at least mentioned as an idea. I don't like the vibes I am getting from them and something has to change soon or I am gonna be finding myself in a rough patch. I told Jones about Daisy's powers to let Jones know that Daisy pretty much lied to Daisy about the street car ladies (sorry daisy I still love u but in the moment I felt used because I know ur bridge group is on like the late 30s and you didn't tell me). Daisy is playing the middle and I need to separate myself from her or at least break her and Shane up. She is using Shane as a shield. Also I was added to the justice league alliance and its so cute (Jones, Jennet, Mikey, Me, Sam) I love this group but I will say Sam is my weakest connection and I don't really have much trust in him? Hoping that will change in these upcoming rounds tho. Also, I told Jones about my vote block that lasts until final 5 which we could use to our advantage later in the game. I will be holding onto that as long as possible. The last major update other than me feeling somewhat left out of this "group" would be that Jess asked if I would be down to make a group after the vote of her/Jake/me/mikey which I would actually very much enjoy. Okay that is my longest confessional yet. I hope you enjoy. As of right now my top two allies are Jones/Mikey....Lowest on my trust rankings are Shane and Lindsay.

JENNET

lovelis dming me saying we should get out mikey pfftttt

DAISY

https://youtu.be/mz2Fg_Kvyqo

SAM

https://youtu.be/J81hUWIy6dg

SHANE

https://drive.google.com/drive/folders/1-dymdy5vjtHdwsY3JSTnovwaSRLvuzQt

JESSICA

me: lovelis will be a jury vote for me! me: nvm!!!! Not sure why being rude to people and attacking them is your strategy on the way out... but you do you!

LOVELIS

I think I mentioned chaos in my previous confessional and I think I just did that so you know what.. I'm content LMAO. I pulled out pretty much all the cards I had left to play this round and if it wasn't enough despite being carried the past two tribals.. then so be it. This has been such a fun past couple days and it's fun to just let loose and see what happens!

[endlessarchite]

Wood Inlay Ornament with German Glass Glitter

Hi friends! And hi to new friends visiting from the #CreativeChristmas Challenge hosted by Remodelaholic!

To those of you who don’t know me yet: welcome. Everyone else has already started drinking and saying really embarrassing things (about themselves, not you… we’re not a super judgmental bunch). To those of you who already know me: cheers. As always, you rock. And I was just kidding about the drinking thing (unless it’s football season and a Saturday, which yes to both).

Anyway, from time to time, I like to throw my hat in on a DIY challenge or two because nothing excuses buying more power tools like overcommitting to a deadline for fun (like the 2×4 summer challenge and boom: new coffee table!). This time around, the theme was making something for Christmas. I’ve already been finding inspiration for my color scheme this year in the form of acorns, snowflakes, owls, and other wintery-woodland things, so I figured: why not see if I can fill up the inevitable empty parts of my tree with what I have on hand, rather than buying a bunch of new ornaments? I also just happened upon a set of carving bits for my Dremel and have been itching to experiment with epoxy/inlays/resins, so I started playing around until this happened:

And as a fun little bonus: I actually made a video of it too!

Tools and Materials

affiliate links of items I recommend and use are listed in this post, which support this site at no cost to you… thanks!

scrap wood (I had 1″ x 4″ poplar)

scissors

printer paper

inkjet printer

acetone or nail polish remover

Dremel 200

Dremel engraving/carving kit

band saw or scroll saw

random orbit sander

wood stain (I used Minwax Ipswich Pine and washed while it was still wet with Early American… I’ll have to show you guys more about this as I’ve done it a number of times to get the colors I like)

Mod Podge

small detail paint brush

Miss Mustard Seed’s German Glass Glitter in Silver Tiara

Martha Stewart Crafts extra fine glitter in Smoky Quartz

clear spray sealer (gloss)

small drill bit

thread (I used stuff from my cross stitch stash)

First things first: print out the image (mine is available for download near the end of the post) and cut it out. I used a scrap piece of poplar that was bound for the burn pile, so I wasn’t really expecting perfection (in fact as you can see, I first used a different image that was WAY too intricate for a first-time experiment and then decided on the final design).

To transfer the ink from the printer paper, I swabbed the back with an acetone nail polish remover. As you can see, the image didn’t transfer perfectly, but it was good enough (I got the idea from my buddy Brad’s video here — then went with the option that wouldn’t require changing out of my pajama pants or going into the cold garage that morning).

Next, I took out my Dremel and a new engraving/carving set I’d recently purchased for another inlay project. In my opinion, crafting is a good intro before graduating to larger pieces, so I figured this would help me practice with diamond tips, how to control the carve, etc. A good method is to create the hard outline first, then carve out the middle, and continue to make the inlay deeper and deeper until it’s got enough depth to hold the inlay material (glitter, epoxy I assume, whatever).

Next, I sketched out the overall shape (spoiler: it wasn’t at all even, so I highly recommend using the template) and then went to cut out the piece. And this is when it seemed like things were conspiring against me: my new scroll saw was broken… right out of the box. Womp, womp.

To make the situation a little stickier, I was about 5 hours away at this point from needing to head out of town to Raleigh, NC (recap here), and I had no other tools that would give me the right depth and shape. Disappointed but undeterred, I figured the next best thing would be to ask to borrow tools from the person I’d be visiting (thankfully, it was a trip to visit some DIY blogging friends just for fun — my pal Brittany just so happened to have a band saw in her garage). Of course, now I want one of those, too.

Of course, I’d never actually used a band saw before, so despite the general don’t-cut-your-fingers-off rule, the piece still came out a little wonky (mostly due to my non-templating sketch). I was able to shape it a little more with an orbital sander. I also carved the edges out a little more and did a final sanding with high grit sandpaper before stain.

Since the overall concept was to make this look like an inlay, I wanted to use glitter with a little more grit and sparkle: enter, German glass glitter. It’s really amazing stuff in person. To paint it into place, I relied on a small paint brush (tip: if the brush starts to fray a little, spin it as you’re dipping it into the glue to get the point fine again… check out my video to see a demo of that).

You can layer the glitter in, too: after giving it some time to dry, paint another bit of glue on top of the glitter and add more into the recessed areas. It will add depth!

I added extra-fine gold glitter around the edge and sealed the whole thing with a clear gloss spray, then drilled a hole through the top and threaded it so it could hang on the tree.

Caveat: before I sealed with a clear gloss, I actually tried to seal with an old polycrylic which unfortunately made the top and bottom tips look faded/cloudy once it dried. At first I thought I’d lean into the mistake by painting the back and sides with chalk paint and sanding to make it look rustic, but it looked really sad instead and totally detracted from the sparkle on the front. I wanted to get this done in time for the blog hop, so I just continued on with sealing again and adding the glitter around the edge. So, if you try a project like this, don’t make my mistake and you’ll get even better results!

You can also try other inlay methods, other glitter colors, fill in the center vs the outer rings with opposite hues, etc… the possibilities are pretty endless!

All in all, I think it’s going to make a nice addition to my white/gold/chrome/woodland Christmas decor theme this year (and the less I need to spend on ornaments, the more budget I have to make Christmas cocktails, hehe).

Want to try this for yourself? You can download my template here.

To be perfectly frank, I think the photos really don’t do the sparkle on this piece enough justice (in fact, I worried that it was looking too drab in photos). So, I made a video tutorial too (I’d love it if you subscribed if you haven’t already… with what I’ve learned in making this tutorial, there is more to come no doubt!).

As I mentioned, this DIY was part of a blog hop, with 25 other bloggers participating — aka, enough DIY Christmas ideas to keep you busy right up until the actual holiday (if you were so ambitiously inclined). So, check out a preview of the other projects and bloggers participating in the images below. You can also head over to the Remodelaholic post (who is hosting this hop) to check out other DIYers submitting their inspired ideas (on social media, you can look for #CreativeChristmas to find them all).

DIY Christmas Trees and Ornaments

Wintry Silver Dollar Store Christmas Tree Decor | Remodelaholic Marbled Christmas Ornaments | Doodlecraft Scrap Wood Inlay Ornaments | The Ugly Duckling House (you’re here!) Woodburned Wood Slice Ornaments | Sisters What Flocked Pine Cones | Practical and Pretty Abstract Monogram Ornaments | Domicile37 Concrete Christmas Ornaments | The Palette Muse Wood Slice Deer Ornaments | Our Crafty Mom Vintage Gumball Machine Ornaments | Beth Watson Design Studio Etched Glass Ornaments | Just Call Me Homegirl Unicorn Inspired Christmas Tree | The DIY Mommy Driftwood Reindeer Ornaments | Sustain My Craft Habit

DIY Christmas Gifts and Decor

Christmas Pine Hoop Wreath | This Mama’s Dance Gingerbread Man Candles | Nourish and Nestle Wire and Glass Chandelier | Home with Cupcakes and Crinoline Christmas Scroll Wall Art | Grace In My Space Lighted Wood Trees | Frazzled Joy Crocheted Christmas Hat | Luz Patterns Christmas Card Photo Display| Hertoolbelt JOY Porch Sign | Ginger Snap Crafts Folding Bar Cart Table | Everyday Party Magazine Wood and Burlap Christmas Sign | Leap of Faith Crafting Wood Block Snowman | Anika’s DIY Life Holiday Candle Wrap | Dragonfly & Lily Pads Christmas Pom Pom Pillow | Small Home Soul Handlettered Wall Art | Smiling Colors

Those of us who did videos for this hop can be found in the playlist below, so those of you who would rather watch than read (or just want to blow off work for a few more minutes) have something, too! *If you’re having difficulty playing it, you can jump over to the playlist here.*

There you have it! Hope you’re getting into the holiday spirit just in time. Will you be working on any decor ideas this Christmas? This is going to be a very busy holiday season for me, so be sure to check back in for more DIYs (I’m going to give that epoxy inlay idea a shot, and a few more scrap ideas are just bubbling in the ol’ brain). Have a great weekend!

You'll Also Love

25 Great Gift Ideas for the Craft Beer Lover

DIY Wooden Couch Sleeve

It’s Pronounced “Damn Good Cookie̶...

Lots of Sneak Peeks: Riding the Buildathon Wave

.yuzo_related_post img{width:170px !important; height:170px !important;} .yuzo_related_post .relatedthumb{line-height:14px;background:#ffffff !important;color:#454747!important;} .yuzo_related_post .relatedthumb:hover{background:#ffffff !important; -webkit-transition: background 0.2s linear; -moz-transition: background 0.2s linear; -o-transition: background 0.2s linear; transition: background 0.2s linear;;color:#454747!important;} .yuzo_related_post .relatedthumb a{color:#102a3b!important;} .yuzo_related_post .relatedthumb a:hover{ color:#113f5e}!important;} .yuzo_related_post .relatedthumb:hover a{ color:#113f5e!important;} .yuzo_related_post .relatedthumb:hover .yuzo__text--title{ color:#113f5e!important;} .yuzo_related_post .yuzo_text, .yuzo_related_post .yuzo_views_post {color:#454747!important;} .yuzo_related_post .relatedthumb:hover .yuzo_text, .yuzo_related_post:hover .yuzo_views_post {color:#454747!important;} .yuzo_related_post .relatedthumb{ margin: 0px 6px 0px 6px; padding: 0px 0px 0px 0px; } jQuery(document).ready(function( $ ){ jQuery('.yuzo_related_post .yuzo_wraps').equalizer({ columns : '> div' }); });

The post Wood Inlay Ornament with German Glass Glitter appeared first on The Ugly Duckling House.

Website // Subscribe // Advertise // Twitter // Facebook // Google+

Wood Inlay Ornament with German Glass Glitter published first on http://ift.tt/2qxZz2j

[chocdono]

Wood Inlay Ornament with German Glass Glitter

Hi friends! And hi to new friends visiting from the #CreativeChristmas Challenge hosted by Remodelaholic!

To those of you who don’t know me yet: welcome. Everyone else has already started drinking and saying really embarrassing things (about themselves, not you… we’re not a super judgmental bunch). To those of you who already know me: cheers. As always, you rock. And I was just kidding about the drinking thing (unless it’s football season and a Saturday, which yes to both).

Anyway, from time to time, I like to throw my hat in on a DIY challenge or two because nothing excuses buying more power tools like overcommitting to a deadline for fun (like the 2×4 summer challenge and boom: new coffee table!). This time around, the theme was making something for Christmas. I’ve already been finding inspiration for my color scheme this year in the form of acorns, snowflakes, owls, and other wintery-woodland things, so I figured: why not see if I can fill up the inevitable empty parts of my tree with what I have on hand, rather than buying a bunch of new ornaments? I also just happened upon a set of carving bits for my Dremel and have been itching to experiment with epoxy/inlays/resins, so I started playing around until this happened:

And as a fun little bonus: I actually made a video of it too!

Tools and Materials

affiliate links of items I recommend and use are listed in this post, which support this site at no cost to you… thanks!

scrap wood (I had 1″ x 4″ poplar)

scissors

printer paper

inkjet printer

acetone or nail polish remover

Dremel 200

Dremel engraving/carving kit

band saw or scroll saw

random orbit sander

wood stain (I used Minwax Ipswich Pine and washed while it was still wet with Early American… I’ll have to show you guys more about this as I’ve done it a number of times to get the colors I like)

Mod Podge

small detail paint brush

Miss Mustard Seed’s German Glass Glitter in Silver Tiara

Martha Stewart Crafts extra fine glitter in Smoky Quartz

clear spray sealer (gloss)

small drill bit

thread (I used stuff from my cross stitch stash)

First things first: print out the image (mine is available for download near the end of the post) and cut it out. I used a scrap piece of poplar that was bound for the burn pile, so I wasn’t really expecting perfection (in fact as you can see, I first used a different image that was WAY too intricate for a first-time experiment and then decided on the final design).

To transfer the ink from the printer paper, I swabbed the back with an acetone nail polish remover. As you can see, the image didn’t transfer perfectly, but it was good enough (I got the idea from my buddy Brad’s video here — then went with the option that wouldn’t require changing out of my pajama pants or going into the cold garage that morning).

Next, I took out my Dremel and a new engraving/carving set I’d recently purchased for another inlay project. In my opinion, crafting is a good intro before graduating to larger pieces, so I figured this would help me practice with diamond tips, how to control the carve, etc. A good method is to create the hard outline first, then carve out the middle, and continue to make the inlay deeper and deeper until it’s got enough depth to hold the inlay material (glitter, epoxy I assume, whatever).

Next, I sketched out the overall shape (spoiler: it wasn’t at all even, so I highly recommend using the template) and then went to cut out the piece. And this is when it seemed like things were conspiring against me: my new scroll saw was broken… right out of the box. Womp, womp.

To make the situation a little stickier, I was about 5 hours away at this point from needing to head out of town to Raleigh, NC (recap here), and I had no other tools that would give me the right depth and shape. Disappointed but undeterred, I figured the next best thing would be to ask to borrow tools from the person I’d be visiting (thankfully, it was a trip to visit some DIY blogging friends just for fun — my pal Brittany just so happened to have a band saw in her garage). Of course, now I want one of those, too.

Of course, I’d never actually used a band saw before, so despite the general don’t-cut-your-fingers-off rule, the piece still came out a little wonky (mostly due to my non-templating sketch). I was able to shape it a little more with an orbital sander. I also carved the edges out a little more and did a final sanding with high grit sandpaper before stain.

Since the overall concept was to make this look like an inlay, I wanted to use glitter with a little more grit and sparkle: enter, German glass glitter. It’s really amazing stuff in person. To paint it into place, I relied on a small paint brush (tip: if the brush starts to fray a little, spin it as you’re dipping it into the glue to get the point fine again… check out my video to see a demo of that).

You can layer the glitter in, too: after giving it some time to dry, paint another bit of glue on top of the glitter and add more into the recessed areas. It will add depth!

I added extra-fine gold glitter around the edge and sealed the whole thing with a clear gloss spray, then drilled a hole through the top and threaded it so it could hang on the tree.

Caveat: before I sealed with a clear gloss, I actually tried to seal with an old polycrylic which unfortunately made the top and bottom tips look faded/cloudy once it dried. At first I thought I’d lean into the mistake by painting the back and sides with chalk paint and sanding to make it look rustic, but it looked really sad instead and totally detracted from the sparkle on the front. I wanted to get this done in time for the blog hop, so I just continued on with sealing again and adding the glitter around the edge. So, if you try a project like this, don’t make my mistake and you’ll get even better results!

You can also try other inlay methods, other glitter colors, fill in the center vs the outer rings with opposite hues, etc… the possibilities are pretty endless!

All in all, I think it’s going to make a nice addition to my white/gold/chrome/woodland Christmas decor theme this year (and the less I need to spend on ornaments, the more budget I have to make Christmas cocktails, hehe).

Want to try this for yourself? You can download my template here.

To be perfectly frank, I think the photos really don’t do the sparkle on this piece enough justice (in fact, I worried that it was looking too drab in photos). So, I made a video tutorial too (I’d love it if you subscribed if you haven’t already… with what I’ve learned in making this tutorial, there is more to come no doubt!).

As I mentioned, this DIY was part of a blog hop, with 25 other bloggers participating — aka, enough DIY Christmas ideas to keep you busy right up until the actual holiday (if you were so ambitiously inclined). So, check out a preview of the other projects and bloggers participating in the images below. You can also head over to the Remodelaholic post (who is hosting this hop) to check out other DIYers submitting their inspired ideas (on social media, you can look for #CreativeChristmas to find them all).

DIY Christmas Trees and Ornaments

Wintry Silver Dollar Store Christmas Tree Decor | Remodelaholic Marbled Christmas Ornaments | Doodlecraft Scrap Wood Inlay Ornaments | The Ugly Duckling House (you’re here!) Woodburned Wood Slice Ornaments | Sisters What Flocked Pine Cones | Practical and Pretty Abstract Monogram Ornaments | Domicile37 Concrete Christmas Ornaments | The Palette Muse Wood Slice Deer Ornaments | Our Crafty Mom Vintage Gumball Machine Ornaments | Beth Watson Design Studio Etched Glass Ornaments | Just Call Me Homegirl Unicorn Inspired Christmas Tree | The DIY Mommy Driftwood Reindeer Ornaments | Sustain My Craft Habit

DIY Christmas Gifts and Decor

Christmas Pine Hoop Wreath | This Mama’s Dance Gingerbread Man Candles | Nourish and Nestle Wire and Glass Chandelier | Home with Cupcakes and Crinoline Christmas Scroll Wall Art | Grace In My Space Lighted Wood Trees | Frazzled Joy Crocheted Christmas Hat | Luz Patterns Christmas Card Photo Display| Hertoolbelt JOY Porch Sign | Ginger Snap Crafts Folding Bar Cart Table | Everyday Party Magazine Wood and Burlap Christmas Sign | Leap of Faith Crafting Wood Block Snowman | Anika’s DIY Life Holiday Candle Wrap | Dragonfly & Lily Pads Christmas Pom Pom Pillow | Small Home Soul Handlettered Wall Art | Smiling Colors

Those of us who did videos for this hop can be found in the playlist below, so those of you who would rather watch than read (or just want to blow off work for a few more minutes) have something, too! *If you’re having difficulty playing it, you can jump over to the playlist here.*

There you have it! Hope you’re getting into the holiday spirit just in time. Will you be working on any decor ideas this Christmas? This is going to be a very busy holiday season for me, so be sure to check back in for more DIYs (I’m going to give that epoxy inlay idea a shot, and a few more scrap ideas are just bubbling in the ol’ brain). Have a great weekend!

You'll Also Love

25 Great Gift Ideas for the Craft Beer Lover

DIY Wooden Couch Sleeve

It’s Pronounced “Damn Good Cookie̶...

Lots of Sneak Peeks: Riding the Buildathon Wave

The post Wood Inlay Ornament with German Glass Glitter appeared first on The Ugly Duckling House.

Website // Subscribe // Advertise // Twitter // Facebook // Google+

from mix1 http://ift.tt/2mesqe5 via with this info

[sherlocklexa]

Wood Inlay Ornament with German Glass Glitter

Hi friends! And hi to new friends visiting from the #CreativeChristmas Challenge hosted by Remodelaholic!

To those of you who don’t know me yet: welcome. Everyone else has already started drinking and saying really embarrassing things (about themselves, not you… we’re not a super judgmental bunch). To those of you who already know me: cheers. As always, you rock. And I was just kidding about the drinking thing (unless it’s football season and a Saturday, which yes to both).

Anyway, from time to time, I like to throw my hat in on a DIY challenge or two because nothing excuses buying more power tools like overcommitting to a deadline for fun (like the 2×4 summer challenge and boom: new coffee table!). This time around, the theme was making something for Christmas. I’ve already been finding inspiration for my color scheme this year in the form of acorns, snowflakes, owls, and other wintery-woodland things, so I figured: why not see if I can fill up the inevitable empty parts of my tree with what I have on hand, rather than buying a bunch of new ornaments? I also just happened upon a set of carving bits for my Dremel and have been itching to experiment with epoxy/inlays/resins, so I started playing around until this happened:

And as a fun little bonus: I actually made a video of it too!

Tools and Materials

affiliate links of items I recommend and use are listed in this post, which support this site at no cost to you… thanks!

scrap wood (I had 1″ x 4″ poplar)

scissors

printer paper

inkjet printer

acetone or nail polish remover

Dremel 200

Dremel engraving/carving kit

band saw or scroll saw

random orbit sander

wood stain (I used Minwax Ipswich Pine and washed while it was still wet with Early American… I’ll have to show you guys more about this as I’ve done it a number of times to get the colors I like)

Mod Podge

small detail paint brush

Miss Mustard Seed’s German Glass Glitter in Silver Tiara

Martha Stewart Crafts extra fine glitter in Smoky Quartz

clear spray sealer (gloss)

small drill bit

thread (I used stuff from my cross stitch stash)

First things first: print out the image (mine is available for download near the end of the post) and cut it out. I used a scrap piece of poplar that was bound for the burn pile, so I wasn’t really expecting perfection (in fact as you can see, I first used a different image that was WAY too intricate for a first-time experiment and then decided on the final design).

To transfer the ink from the printer paper, I swabbed the back with an acetone nail polish remover. As you can see, the image didn’t transfer perfectly, but it was good enough (I got the idea from my buddy Brad’s video here — then went with the option that wouldn’t require changing out of my pajama pants or going into the cold garage that morning).

Next, I took out my Dremel and a new engraving/carving set I’d recently purchased for another inlay project. In my opinion, crafting is a good intro before graduating to larger pieces, so I figured this would help me practice with diamond tips, how to control the carve, etc. A good method is to create the hard outline first, then carve out the middle, and continue to make the inlay deeper and deeper until it’s got enough depth to hold the inlay material (glitter, epoxy I assume, whatever).

Next, I sketched out the overall shape (spoiler: it wasn’t at all even, so I highly recommend using the template) and then went to cut out the piece. And this is when it seemed like things were conspiring against me: my new scroll saw was broken… right out of the box. Womp, womp.

To make the situation a little stickier, I was about 5 hours away at this point from needing to head out of town to Raleigh, NC (recap here), and I had no other tools that would give me the right depth and shape. Disappointed but undeterred, I figured the next best thing would be to ask to borrow tools from the person I’d be visiting (thankfully, it was a trip to visit some DIY blogging friends just for fun — my pal Brittany just so happened to have a band saw in her garage). Of course, now I want one of those, too.

Of course, I’d never actually used a band saw before, so despite the general don’t-cut-your-fingers-off rule, the piece still came out a little wonky (mostly due to my non-templating sketch). I was able to shape it a little more with an orbital sander. I also carved the edges out a little more and did a final sanding with high grit sandpaper before stain.

Since the overall concept was to make this look like an inlay, I wanted to use glitter with a little more grit and sparkle: enter, German glass glitter. It’s really amazing stuff in person. To paint it into place, I relied on a small paint brush (tip: if the brush starts to fray a little, spin it as you’re dipping it into the glue to get the point fine again… check out my video to see a demo of that).

You can layer the glitter in, too: after giving it some time to dry, paint another bit of glue on top of the glitter and add more into the recessed areas. It will add depth!

I added extra-fine gold glitter around the edge and sealed the whole thing with a clear gloss spray, then drilled a hole through the top and threaded it so it could hang on the tree.

Caveat: before I sealed with a clear gloss, I actually tried to seal with an old polycrylic which unfortunately made the top and bottom tips look faded/cloudy once it dried. At first I thought I’d lean into the mistake by painting the back and sides with chalk paint and sanding to make it look rustic, but it looked really sad instead and totally detracted from the sparkle on the front. I wanted to get this done in time for the blog hop, so I just continued on with sealing again and adding the glitter around the edge. So, if you try a project like this, don’t make my mistake and you’ll get even better results!

You can also try other inlay methods, other glitter colors, fill in the center vs the outer rings with opposite hues, etc… the possibilities are pretty endless!

All in all, I think it’s going to make a nice addition to my white/gold/chrome/woodland Christmas decor theme this year (and the less I need to spend on ornaments, the more budget I have to make Christmas cocktails, hehe).

Want to try this for yourself? You can download my template here.

To be perfectly frank, I think the photos really don’t do the sparkle on this piece enough justice (in fact, I worried that it was looking too drab in photos). So, I made a video tutorial too (I’d love it if you subscribed if you haven’t already… with what I’ve learned in making this tutorial, there is more to come no doubt!).

As I mentioned, this DIY was part of a blog hop, with 25 other bloggers participating — aka, enough DIY Christmas ideas to keep you busy right up until the actual holiday (if you were so ambitiously inclined). So, check out a preview of the other projects and bloggers participating in the images below. You can also head over to the Remodelaholic post (who is hosting this hop) to check out other DIYers submitting their inspired ideas (on social media, you can look for #CreativeChristmas to find them all).

DIY Christmas Trees and Ornaments

Wintry Silver Dollar Store Christmas Tree Decor | Remodelaholic Marbled Christmas Ornaments | Doodlecraft Scrap Wood Inlay Ornaments | The Ugly Duckling House (you’re here!) Woodburned Wood Slice Ornaments | Sisters What Flocked Pine Cones | Practical and Pretty Abstract Monogram Ornaments | Domicile37 Concrete Christmas Ornaments | The Palette Muse Wood Slice Deer Ornaments | Our Crafty Mom Vintage Gumball Machine Ornaments | Beth Watson Design Studio Etched Glass Ornaments | Just Call Me Homegirl Unicorn Inspired Christmas Tree | The DIY Mommy Driftwood Reindeer Ornaments | Sustain My Craft Habit

DIY Christmas Gifts and Decor

Christmas Pine Hoop Wreath | This Mama’s Dance Gingerbread Man Candles | Nourish and Nestle Wire and Glass Chandelier | Home with Cupcakes and Crinoline Christmas Scroll Wall Art | Grace In My Space Lighted Wood Trees | Frazzled Joy Crocheted Christmas Hat | Luz Patterns Christmas Card Photo Display| Hertoolbelt JOY Porch Sign | Ginger Snap Crafts Folding Bar Cart Table | Everyday Party Magazine Wood and Burlap Christmas Sign | Leap of Faith Crafting Wood Block Snowman | Anika’s DIY Life Holiday Candle Wrap | Dragonfly & Lily Pads Christmas Pom Pom Pillow | Small Home Soul Handlettered Wall Art | Smiling Colors

Those of us who did videos for this hop can be found in the playlist below, so those of you who would rather watch than read (or just want to blow off work for a few more minutes) have something, too! *If you’re having difficulty playing it, you can jump over to the playlist here.*

There you have it! Hope you’re getting into the holiday spirit just in time. Will you be working on any decor ideas this Christmas? This is going to be a very busy holiday season for me, so be sure to check back in for more DIYs (I’m going to give that epoxy inlay idea a shot, and a few more scrap ideas are just bubbling in the ol’ brain). Have a great weekend!

You'll Also Love

25 Great Gift Ideas for the Craft Beer Lover

DIY Wooden Couch Sleeve

It’s Pronounced “Damn Good Cookie̶...

Lots of Sneak Peeks: Riding the Buildathon Wave

The post Wood Inlay Ornament with German Glass Glitter appeared first on The Ugly Duckling House.

Website // Subscribe // Advertise // Twitter // Facebook // Google+

from car2 http://ift.tt/2mesqe5 via as shown a lot

[winstonsalempainting]

Wood Inlay Ornament with German Glass Glitter

Hi friends! And hi to new friends visiting from the #CreativeChristmas Challenge hosted by Remodelaholic!

To those of you who don’t know me yet: welcome. Everyone else has already started drinking and saying really embarrassing things (about themselves, not you… we’re not a super judgmental bunch). To those of you who already know me: cheers. As always, you rock. And I was just kidding about the drinking thing (unless it’s football season and a Saturday, which yes to both).

Anyway, from time to time, I like to throw my hat in on a DIY challenge or two because nothing excuses buying more power tools like overcommitting to a deadline for fun (like the 2×4 summer challenge and boom: new coffee table!). This time around, the theme was making something for Christmas. I’ve already been finding inspiration for my color scheme this year in the form of acorns, snowflakes, owls, and other wintery-woodland things, so I figured: why not see if I can fill up the inevitable empty parts of my tree with what I have on hand, rather than buying a bunch of new ornaments? I also just happened upon a set of carving bits for my Dremel and have been itching to experiment with epoxy/inlays/resins, so I started playing around until this happened:

And as a fun little bonus: I actually made a video of it too!

Tools and Materials

affiliate links of items I recommend and use are listed in this post, which support this site at no cost to you… thanks!

scrap wood (I had 1″ x 4″ poplar)

scissors

printer paper

inkjet printer

acetone or nail polish remover

Dremel 200

Dremel engraving/carving kit

band saw or scroll saw

random orbit sander

wood stain (I used Minwax Ipswich Pine and washed while it was still wet with Early American… I’ll have to show you guys more about this as I’ve done it a number of times to get the colors I like)

Mod Podge

small detail paint brush

Miss Mustard Seed’s German Glass Glitter in Silver Tiara

Martha Stewart Crafts extra fine glitter in Smoky Quartz

clear spray sealer (gloss)

small drill bit

thread (I used stuff from my cross stitch stash)

First things first: print out the image (mine is available for download near the end of the post) and cut it out. I used a scrap piece of poplar that was bound for the burn pile, so I wasn’t really expecting perfection (in fact as you can see, I first used a different image that was WAY too intricate for a first-time experiment and then decided on the final design).

To transfer the ink from the printer paper, I swabbed the back with an acetone nail polish remover. As you can see, the image didn’t transfer perfectly, but it was good enough (I got the idea from my buddy Brad’s video here — then went with the option that wouldn’t require changing out of my pajama pants or going into the cold garage that morning).

Next, I took out my Dremel and a new engraving/carving set I’d recently purchased for another inlay project. In my opinion, crafting is a good intro before graduating to larger pieces, so I figured this would help me practice with diamond tips, how to control the carve, etc. A good method is to create the hard outline first, then carve out the middle, and continue to make the inlay deeper and deeper until it’s got enough depth to hold the inlay material (glitter, epoxy I assume, whatever).

Next, I sketched out the overall shape (spoiler: it wasn’t at all even, so I highly recommend using the template) and then went to cut out the piece. And this is when it seemed like things were conspiring against me: my new scroll saw was broken… right out of the box. Womp, womp.

To make the situation a little stickier, I was about 5 hours away at this point from needing to head out of town to Raleigh, NC (recap here), and I had no other tools that would give me the right depth and shape. Disappointed but undeterred, I figured the next best thing would be to ask to borrow tools from the person I’d be visiting (thankfully, it was a trip to visit some DIY blogging friends just for fun — my pal Brittany just so happened to have a band saw in her garage). Of course, now I want one of those, too.

Of course, I’d never actually used a band saw before, so despite the general don’t-cut-your-fingers-off rule, the piece still came out a little wonky (mostly due to my non-templating sketch). I was able to shape it a little more with an orbital sander. I also carved the edges out a little more and did a final sanding with high grit sandpaper before stain.

Since the overall concept was to make this look like an inlay, I wanted to use glitter with a little more grit and sparkle: enter, German glass glitter. It’s really amazing stuff in person. To paint it into place, I relied on a small paint brush (tip: if the brush starts to fray a little, spin it as you’re dipping it into the glue to get the point fine again… check out my video to see a demo of that).

You can layer the glitter in, too: after giving it some time to dry, paint another bit of glue on top of the glitter and add more into the recessed areas. It will add depth!

I added extra-fine gold glitter around the edge and sealed the whole thing with a clear gloss spray, then drilled a hole through the top and threaded it so it could hang on the tree.

Caveat: before I sealed with a clear gloss, I actually tried to seal with an old polycrylic which unfortunately made the top and bottom tips look faded/cloudy once it dried. At first I thought I’d lean into the mistake by painting the back and sides with chalk paint and sanding to make it look rustic, but it looked really sad instead and totally detracted from the sparkle on the front. I wanted to get this done in time for the blog hop, so I just continued on with sealing again and adding the glitter around the edge. So, if you try a project like this, don’t make my mistake and you’ll get even better results!

You can also try other inlay methods, other glitter colors, fill in the center vs the outer rings with opposite hues, etc… the possibilities are pretty endless!

All in all, I think it’s going to make a nice addition to my white/gold/chrome/woodland Christmas decor theme this year (and the less I need to spend on ornaments, the more budget I have to make Christmas cocktails, hehe).

Want to try this for yourself? You can download my template here.

To be perfectly frank, I think the photos really don’t do the sparkle on this piece enough justice (in fact, I worried that it was looking too drab in photos). So, I made a video tutorial too (I’d love it if you subscribed if you haven’t already… with what I’ve learned in making this tutorial, there is more to come no doubt!).

As I mentioned, this DIY was part of a blog hop, with 25 other bloggers participating — aka, enough DIY Christmas ideas to keep you busy right up until the actual holiday (if you were so ambitiously inclined). So, check out a preview of the other projects and bloggers participating in the images below. You can also head over to the Remodelaholic post (who is hosting this hop) to check out other DIYers submitting their inspired ideas (on social media, you can look for #CreativeChristmas to find them all).

DIY Christmas Trees and Ornaments

Wintry Silver Dollar Store Christmas Tree Decor | Remodelaholic Marbled Christmas Ornaments | Doodlecraft Scrap Wood Inlay Ornaments | The Ugly Duckling House (you’re here!) Woodburned Wood Slice Ornaments | Sisters What Flocked Pine Cones | Practical and Pretty Abstract Monogram Ornaments | Domicile37 Concrete Christmas Ornaments | The Palette Muse Wood Slice Deer Ornaments | Our Crafty Mom Vintage Gumball Machine Ornaments | Beth Watson Design Studio Etched Glass Ornaments | Just Call Me Homegirl Unicorn Inspired Christmas Tree | The DIY Mommy Driftwood Reindeer Ornaments | Sustain My Craft Habit

DIY Christmas Gifts and Decor

Christmas Pine Hoop Wreath | This Mama’s Dance Gingerbread Man Candles | Nourish and Nestle Wire and Glass Chandelier | Home with Cupcakes and Crinoline Christmas Scroll Wall Art | Grace In My Space Lighted Wood Trees | Frazzled Joy Crocheted Christmas Hat | Luz Patterns Christmas Card Photo Display| Hertoolbelt JOY Porch Sign | Ginger Snap Crafts Folding Bar Cart Table | Everyday Party Magazine Wood and Burlap Christmas Sign | Leap of Faith Crafting Wood Block Snowman | Anika’s DIY Life Holiday Candle Wrap | Dragonfly & Lily Pads Christmas Pom Pom Pillow | Small Home Soul Handlettered Wall Art | Smiling Colors

Those of us who did videos for this hop can be found in the playlist below, so those of you who would rather watch than read (or just want to blow off work for a few more minutes) have something, too! *If you’re having difficulty playing it, you can jump over to the playlist here.*

There you have it! Hope you’re getting into the holiday spirit just in time. Will you be working on any decor ideas this Christmas? This is going to be a very busy holiday season for me, so be sure to check back in for more DIYs (I’m going to give that epoxy inlay idea a shot, and a few more scrap ideas are just bubbling in the ol’ brain). Have a great weekend!

You'll Also Love

25 Great Gift Ideas for the Craft Beer Lover

DIY Wooden Couch Sleeve

It’s Pronounced “Damn Good Cookie̶...

Lots of Sneak Peeks: Riding the Buildathon Wave

.yuzo_related_post img{width:170px !important; height:170px !important;} .yuzo_related_post .relatedthumb{line-height:14px;background:#ffffff !important;color:#454747!important;} .yuzo_related_post .relatedthumb:hover{background:#ffffff !important; -webkit-transition: background 0.2s linear; -moz-transition: background 0.2s linear; -o-transition: background 0.2s linear; transition: background 0.2s linear;;color:#454747!important;} .yuzo_related_post .relatedthumb a{color:#102a3b!important;} .yuzo_related_post .relatedthumb a:hover{ color:#113f5e}!important;} .yuzo_related_post .relatedthumb:hover a{ color:#113f5e!important;} .yuzo_related_post .relatedthumb:hover .yuzo__text--title{ color:#113f5e!important;} .yuzo_related_post .yuzo_text, .yuzo_related_post .yuzo_views_post {color:#454747!important;} .yuzo_related_post .relatedthumb:hover .yuzo_text, .yuzo_related_post:hover .yuzo_views_post {color:#454747!important;} .yuzo_related_post .relatedthumb{ margin: 0px 6px 0px 6px; padding: 0px 0px 0px 0px; } jQuery(document).ready(function( $ ){ jQuery('.yuzo_related_post .yuzo_wraps').equalizer({ columns : '> div' }); });

The post Wood Inlay Ornament with German Glass Glitter appeared first on The Ugly Duckling House.

Website // Subscribe // Advertise // Twitter // Facebook // Google+

Read more http://ift.tt/2mesqe5 Areas served: Winston-Salem, High Point, Yadkinville, Mocksville, Advance, Clemmons, Kernersville, Greensboro, Walnut Cove, Statesville, NC, North Carolina Services: House painting, roofing, deck building, landscaping, Carpentry, Flooring, tile, hardwood, remodeling, home improvement, interior, exterior

[darwinbigelow]

Wood Inlay Ornament with German Glass Glitter

Hi friends! And hi to new friends visiting from the #CreativeChristmas Challenge hosted by Remodelaholic!

To those of you who don’t know me yet: welcome. Everyone else has already started drinking and saying really embarrassing things (about themselves, not you… we’re not a super judgmental bunch). To those of you who already know me: cheers. As always, you rock. And I was just kidding about the drinking thing (unless it’s football season and a Saturday, which yes to both).

Anyway, from time to time, I like to throw my hat in on a DIY challenge or two because nothing excuses buying more power tools like overcommitting to a deadline for fun (like the 2×4 summer challenge and boom: new coffee table!). This time around, the theme was making something for Christmas. I’ve already been finding inspiration for my color scheme this year in the form of acorns, snowflakes, owls, and other wintery-woodland things, so I figured: why not see if I can fill up the inevitable empty parts of my tree with what I have on hand, rather than buying a bunch of new ornaments? I also just happened upon a set of carving bits for my Dremel and have been itching to experiment with epoxy/inlays/resins, so I started playing around until this happened:

And as a fun little bonus: I actually made a video of it too!

Tools and Materials

affiliate links of items I recommend and use are listed in this post, which support this site at no cost to you… thanks!

scrap wood (I had 1″ x 4″ poplar)

scissors

printer paper

inkjet printer

acetone or nail polish remover

Dremel 200

Dremel engraving/carving kit

band saw or scroll saw

random orbit sander

wood stain (I used Minwax Ipswich Pine and washed while it was still wet with Early American… I’ll have to show you guys more about this as I’ve done it a number of times to get the colors I like)

Mod Podge

small detail paint brush

Miss Mustard Seed’s German Glass Glitter in Silver Tiara

Martha Stewart Crafts extra fine glitter in Smoky Quartz

clear spray sealer (gloss)

small drill bit

thread (I used stuff from my cross stitch stash)

First things first: print out the image (mine is available for download near the end of the post) and cut it out. I used a scrap piece of poplar that was bound for the burn pile, so I wasn’t really expecting perfection (in fact as you can see, I first used a different image that was WAY too intricate for a first-time experiment and then decided on the final design).

To transfer the ink from the printer paper, I swabbed the back with an acetone nail polish remover. As you can see, the image didn’t transfer perfectly, but it was good enough (I got the idea from my buddy Brad’s video here — then went with the option that wouldn’t require changing out of my pajama pants or going into the cold garage that morning).

Next, I took out my Dremel and a new engraving/carving set I’d recently purchased for another inlay project. In my opinion, crafting is a good intro before graduating to larger pieces, so I figured this would help me practice with diamond tips, how to control the carve, etc. A good method is to create the hard outline first, then carve out the middle, and continue to make the inlay deeper and deeper until it’s got enough depth to hold the inlay material (glitter, epoxy I assume, whatever).

Next, I sketched out the overall shape (spoiler: it wasn’t at all even, so I highly recommend using the template) and then went to cut out the piece. And this is when it seemed like things were conspiring against me: my new scroll saw was broken… right out of the box. Womp, womp.

To make the situation a little stickier, I was about 5 hours away at this point from needing to head out of town to Raleigh, NC (recap here), and I had no other tools that would give me the right depth and shape. Disappointed but undeterred, I figured the next best thing would be to ask to borrow tools from the person I’d be visiting (thankfully, it was a trip to visit some DIY blogging friends just for fun — my pal Brittany just so happened to have a band saw in her garage). Of course, now I want one of those, too.

Of course, I’d never actually used a band saw before, so despite the general don’t-cut-your-fingers-off rule, the piece still came out a little wonky (mostly due to my non-templating sketch). I was able to shape it a little more with an orbital sander. I also carved the edges out a little more and did a final sanding with high grit sandpaper before stain.

Since the overall concept was to make this look like an inlay, I wanted to use glitter with a little more grit and sparkle: enter, German glass glitter. It’s really amazing stuff in person. To paint it into place, I relied on a small paint brush (tip: if the brush starts to fray a little, spin it as you’re dipping it into the glue to get the point fine again… check out my video to see a demo of that).

You can layer the glitter in, too: after giving it some time to dry, paint another bit of glue on top of the glitter and add more into the recessed areas. It will add depth!

I added extra-fine gold glitter around the edge and sealed the whole thing with a clear gloss spray, then drilled a hole through the top and threaded it so it could hang on the tree.

Caveat: before I sealed with a clear gloss, I actually tried to seal with an old polycrylic which unfortunately made the top and bottom tips look faded/cloudy once it dried. At first I thought I’d lean into the mistake by painting the back and sides with chalk paint and sanding to make it look rustic, but it looked really sad instead and totally detracted from the sparkle on the front. I wanted to get this done in time for the blog hop, so I just continued on with sealing again and adding the glitter around the edge. So, if you try a project like this, don’t make my mistake and you’ll get even better results!

You can also try other inlay methods, other glitter colors, fill in the center vs the outer rings with opposite hues, etc… the possibilities are pretty endless!

All in all, I think it’s going to make a nice addition to my white/gold/chrome/woodland Christmas decor theme this year (and the less I need to spend on ornaments, the more budget I have to make Christmas cocktails, hehe).

Want to try this for yourself? You can download my template here.

To be perfectly frank, I think the photos really don’t do the sparkle on this piece enough justice (in fact, I worried that it was looking too drab in photos). So, I made a video tutorial too (I’d love it if you subscribed if you haven’t already… with what I’ve learned in making this tutorial, there is more to come no doubt!).

As I mentioned, this DIY was part of a blog hop, with 25 other bloggers participating — aka, enough DIY Christmas ideas to keep you busy right up until the actual holiday (if you were so ambitiously inclined). So, check out a preview of the other projects and bloggers participating in the images below. You can also head over to the Remodelaholic post (who is hosting this hop) to check out other DIYers submitting their inspired ideas (on social media, you can look for #CreativeChristmas to find them all).

DIY Christmas Trees and Ornaments

Wintry Silver Dollar Store Christmas Tree Decor | Remodelaholic Marbled Christmas Ornaments | Doodlecraft Scrap Wood Inlay Ornaments | The Ugly Duckling House (you’re here!) Woodburned Wood Slice Ornaments | Sisters What Flocked Pine Cones | Practical and Pretty Abstract Monogram Ornaments | Domicile37 Concrete Christmas Ornaments | The Palette Muse Wood Slice Deer Ornaments | Our Crafty Mom Vintage Gumball Machine Ornaments | Beth Watson Design Studio Etched Glass Ornaments | Just Call Me Homegirl Unicorn Inspired Christmas Tree | The DIY Mommy Driftwood Reindeer Ornaments | Sustain My Craft Habit

DIY Christmas Gifts and Decor

Christmas Pine Hoop Wreath | This Mama’s Dance Gingerbread Man Candles | Nourish and Nestle Wire and Glass Chandelier | Home with Cupcakes and Crinoline Christmas Scroll Wall Art | Grace In My Space Lighted Wood Trees | Frazzled Joy Crocheted Christmas Hat | Luz Patterns Christmas Card Photo Display| Hertoolbelt JOY Porch Sign | Ginger Snap Crafts Folding Bar Cart Table | Everyday Party Magazine Wood and Burlap Christmas Sign | Leap of Faith Crafting Wood Block Snowman | Anika’s DIY Life Holiday Candle Wrap | Dragonfly & Lily Pads Christmas Pom Pom Pillow | Small Home Soul Handlettered Wall Art | Smiling Colors

Those of us who did videos for this hop can be found in the playlist below, so those of you who would rather watch than read (or just want to blow off work for a few more minutes) have something, too! *If you’re having difficulty playing it, you can jump over to the playlist here.*

There you have it! Hope you’re getting into the holiday spirit just in time. Will you be working on any decor ideas this Christmas? This is going to be a very busy holiday season for me, so be sure to check back in for more DIYs (I’m going to give that epoxy inlay idea a shot, and a few more scrap ideas are just bubbling in the ol’ brain). Have a great weekend!

You'll Also Love

25 Great Gift Ideas for the Craft Beer Lover

DIY Wooden Couch Sleeve

It’s Pronounced “Damn Good Cookie̶...

Lots of Sneak Peeks: Riding the Buildathon Wave

.yuzo_related_post img{width:170px !important; height:170px !important;} .yuzo_related_post .relatedthumb{line-height:14px;background:#ffffff !important;color:#454747!important;} .yuzo_related_post .relatedthumb:hover{background:#ffffff !important; -webkit-transition: background 0.2s linear; -moz-transition: background 0.2s linear; -o-transition: background 0.2s linear; transition: background 0.2s linear;;color:#454747!important;} .yuzo_related_post .relatedthumb a{color:#102a3b!important;} .yuzo_related_post .relatedthumb a:hover{ color:#113f5e}!important;} .yuzo_related_post .relatedthumb:hover a{ color:#113f5e!important;} .yuzo_related_post .relatedthumb:hover .yuzo__text--title{ color:#113f5e!important;} .yuzo_related_post .yuzo_text, .yuzo_related_post .yuzo_views_post {color:#454747!important;} .yuzo_related_post .relatedthumb:hover .yuzo_text, .yuzo_related_post:hover .yuzo_views_post {color:#454747!important;} .yuzo_related_post .relatedthumb{ margin: 0px 6px 0px 6px; padding: 0px 0px 0px 0px; } jQuery(document).ready(function( $ ){ jQuery('.yuzo_related_post .yuzo_wraps').equalizer({ columns : '> div' }); });

The post Wood Inlay Ornament with German Glass Glitter appeared first on The Ugly Duckling House.

Website // Subscribe // Advertise // Twitter // Facebook // Google+

from Home Improvement https://www.uglyducklinghouse.com/wood-inlay-ornament-german-glass-glitter/ via http://www.rssmix.com/

[bespokekitchesldn]

Wood Inlay Ornament with German Glass Glitter

Hi friends! And hi to new friends visiting from the #CreativeChristmas Challenge hosted by Remodelaholic!

To those of you who don’t know me yet: welcome. Everyone else has already started drinking and saying really embarrassing things (about themselves, not you… we’re not a super judgmental bunch). To those of you who already know me: cheers. As always, you rock. And I was just kidding about the drinking thing (unless it’s football season and a Saturday, which yes to both).

Anyway, from time to time, I like to throw my hat in on a DIY challenge or two because nothing excuses buying more power tools like overcommitting to a deadline for fun (like the 2×4 summer challenge and boom: new coffee table!). This time around, the theme was making something for Christmas. I’ve already been finding inspiration for my color scheme this year in the form of acorns, snowflakes, owls, and other wintery-woodland things, so I figured: why not see if I can fill up the inevitable empty parts of my tree with what I have on hand, rather than buying a bunch of new ornaments? I also just happened upon a set of carving bits for my Dremel and have been itching to experiment with epoxy/inlays/resins, so I started playing around until this happened:

And as a fun little bonus: I actually made a video of it too!

Tools and Materials

affiliate links of items I recommend and use are listed in this post, which support this site at no cost to you… thanks!

scrap wood (I had 1″ x 4″ poplar)

scissors

printer paper

inkjet printer

acetone or nail polish remover

Dremel 200

Dremel engraving/carving kit

band saw or scroll saw

random orbit sander

wood stain (I used Minwax Ipswich Pine and washed while it was still wet with Early American… I’ll have to show you guys more about this as I’ve done it a number of times to get the colors I like)

Mod Podge

small detail paint brush

Miss Mustard Seed’s German Glass Glitter in Silver Tiara

Martha Stewart Crafts extra fine glitter in Smoky Quartz

clear spray sealer (gloss)

small drill bit

thread (I used stuff from my cross stitch stash)

First things first: print out the image (mine is available for download near the end of the post) and cut it out. I used a scrap piece of poplar that was bound for the burn pile, so I wasn’t really expecting perfection (in fact as you can see, I first used a different image that was WAY too intricate for a first-time experiment and then decided on the final design).

To transfer the ink from the printer paper, I swabbed the back with an acetone nail polish remover. As you can see, the image didn’t transfer perfectly, but it was good enough (I got the idea from my buddy Brad’s video here — then went with the option that wouldn’t require changing out of my pajama pants or going into the cold garage that morning).

Next, I took out my Dremel and a new engraving/carving set I’d recently purchased for another inlay project. In my opinion, crafting is a good intro before graduating to larger pieces, so I figured this would help me practice with diamond tips, how to control the carve, etc. A good method is to create the hard outline first, then carve out the middle, and continue to make the inlay deeper and deeper until it’s got enough depth to hold the inlay material (glitter, epoxy I assume, whatever).

Next, I sketched out the overall shape (spoiler: it wasn’t at all even, so I highly recommend using the template) and then went to cut out the piece. And this is when it seemed like things were conspiring against me: my new scroll saw was broken… right out of the box. Womp, womp.

To make the situation a little stickier, I was about 5 hours away at this point from needing to head out of town to Raleigh, NC (recap here), and I had no other tools that would give me the right depth and shape. Disappointed but undeterred, I figured the next best thing would be to ask to borrow tools from the person I’d be visiting (thankfully, it was a trip to visit some DIY blogging friends just for fun — my pal Brittany just so happened to have a band saw in her garage). Of course, now I want one of those, too.

Of course, I’d never actually used a band saw before, so despite the general don’t-cut-your-fingers-off rule, the piece still came out a little wonky (mostly due to my non-templating sketch). I was able to shape it a little more with an orbital sander. I also carved the edges out a little more and did a final sanding with high grit sandpaper before stain.

Since the overall concept was to make this look like an inlay, I wanted to use glitter with a little more grit and sparkle: enter, German glass glitter. It’s really amazing stuff in person. To paint it into place, I relied on a small paint brush (tip: if the brush starts to fray a little, spin it as you’re dipping it into the glue to get the point fine again… check out my video to see a demo of that).

You can layer the glitter in, too: after giving it some time to dry, paint another bit of glue on top of the glitter and add more into the recessed areas. It will add depth!

I added extra-fine gold glitter around the edge and sealed the whole thing with a clear gloss spray, then drilled a hole through the top and threaded it so it could hang on the tree.

Caveat: before I sealed with a clear gloss, I actually tried to seal with an old polycrylic which unfortunately made the top and bottom tips look faded/cloudy once it dried. At first I thought I’d lean into the mistake by painting the back and sides with chalk paint and sanding to make it look rustic, but it looked really sad instead and totally detracted from the sparkle on the front. I wanted to get this done in time for the blog hop, so I just continued on with sealing again and adding the glitter around the edge. So, if you try a project like this, don’t make my mistake and you’ll get even better results!

You can also try other inlay methods, other glitter colors, fill in the center vs the outer rings with opposite hues, etc… the possibilities are pretty endless!

All in all, I think it’s going to make a nice addition to my white/gold/chrome/woodland Christmas decor theme this year (and the less I need to spend on ornaments, the more budget I have to make Christmas cocktails, hehe).

Want to try this for yourself? You can download my template here.

To be perfectly frank, I think the photos really don’t do the sparkle on this piece enough justice (in fact, I worried that it was looking too drab in photos). So, I made a video tutorial too (I’d love it if you subscribed if you haven’t already… with what I’ve learned in making this tutorial, there is more to come no doubt!).

As I mentioned, this DIY was part of a blog hop, with 25 other bloggers participating — aka, enough DIY Christmas ideas to keep you busy right up until the actual holiday (if you were so ambitiously inclined). So, check out a preview of the other projects and bloggers participating in the images below. You can also head over to the Remodelaholic post (who is hosting this hop) to check out other DIYers submitting their inspired ideas (on social media, you can look for #CreativeChristmas to find them all).

DIY Christmas Trees and Ornaments

Wintry Silver Dollar Store Christmas Tree Decor | Remodelaholic Marbled Christmas Ornaments | Doodlecraft Scrap Wood Inlay Ornaments | The Ugly Duckling House (you’re here!) Woodburned Wood Slice Ornaments | Sisters What Flocked Pine Cones | Practical and Pretty Abstract Monogram Ornaments | Domicile37 Concrete Christmas Ornaments | The Palette Muse Wood Slice Deer Ornaments | Our Crafty Mom Vintage Gumball Machine Ornaments | Beth Watson Design Studio Etched Glass Ornaments | Just Call Me Homegirl Unicorn Inspired Christmas Tree | The DIY Mommy Driftwood Reindeer Ornaments | Sustain My Craft Habit

DIY Christmas Gifts and Decor

Christmas Pine Hoop Wreath | This Mama’s Dance Gingerbread Man Candles | Nourish and Nestle Wire and Glass Chandelier | Home with Cupcakes and Crinoline Christmas Scroll Wall Art | Grace In My Space Lighted Wood Trees | Frazzled Joy Crocheted Christmas Hat | Luz Patterns Christmas Card Photo Display| Hertoolbelt JOY Porch Sign | Ginger Snap Crafts Folding Bar Cart Table | Everyday Party Magazine Wood and Burlap Christmas Sign | Leap of Faith Crafting Wood Block Snowman | Anika’s DIY Life Holiday Candle Wrap | Dragonfly & Lily Pads Christmas Pom Pom Pillow | Small Home Soul Handlettered Wall Art | Smiling Colors

Those of us who did videos for this hop can be found in the playlist below, so those of you who would rather watch than read (or just want to blow off work for a few more minutes) have something, too! *If you’re having difficulty playing it, you can jump over to the playlist here.*

There you have it! Hope you’re getting into the holiday spirit just in time. Will you be working on any decor ideas this Christmas? This is going to be a very busy holiday season for me, so be sure to check back in for more DIYs (I’m going to give that epoxy inlay idea a shot, and a few more scrap ideas are just bubbling in the ol’ brain). Have a great weekend!

You'll Also Love

25 Great Gift Ideas for the Craft Beer Lover

DIY Wooden Couch Sleeve

It’s Pronounced “Damn Good Cookie̶...

Lots of Sneak Peeks: Riding the Buildathon Wave

.yuzo_related_post img{width:170px !important; height:170px !important;} .yuzo_related_post .relatedthumb{line-height:14px;background:#ffffff !important;color:#454747!important;} .yuzo_related_post .relatedthumb:hover{background:#ffffff !important; -webkit-transition: background 0.2s linear; -moz-transition: background 0.2s linear; -o-transition: background 0.2s linear; transition: background 0.2s linear;;color:#454747!important;} .yuzo_related_post .relatedthumb a{color:#102a3b!important;} .yuzo_related_post .relatedthumb a:hover{ color:#113f5e}!important;} .yuzo_related_post .relatedthumb:hover a{ color:#113f5e!important;} .yuzo_related_post .relatedthumb:hover .yuzo__text--title{ color:#113f5e!important;} .yuzo_related_post .yuzo_text, .yuzo_related_post .yuzo_views_post {color:#454747!important;} .yuzo_related_post .relatedthumb:hover .yuzo_text, .yuzo_related_post:hover .yuzo_views_post {color:#454747!important;} .yuzo_related_post .relatedthumb{ margin: 0px 6px 0px 6px; padding: 0px 0px 0px 0px; } jQuery(document).ready(function( $ ){ jQuery('.yuzo_related_post .yuzo_wraps').equalizer({ columns : '> div' }); });

The post Wood Inlay Ornament with German Glass Glitter appeared first on The Ugly Duckling House.

Website // Subscribe // Advertise // Twitter // Facebook // Google+

from The Ugly Duckling House https://www.uglyducklinghouse.com/wood-inlay-ornament-german-glass-glitter/

[garagedoorsbrighton]

Wood Inlay Ornament with German Glass Glitter

Hi friends! And hi to new friends visiting from the #CreativeChristmas Challenge hosted by Remodelaholic!

To those of you who don’t know me yet: welcome. Everyone else has already started drinking and saying really embarrassing things (about themselves, not you… we’re not a super judgmental bunch). To those of you who already know me: cheers. As always, you rock. And I was just kidding about the drinking thing (unless it’s football season and a Saturday, which yes to both).

Anyway, from time to time, I like to throw my hat in on a DIY challenge or two because nothing excuses buying more power tools like overcommitting to a deadline for fun (like the 2×4 summer challenge and boom: new coffee table!). This time around, the theme was making something for Christmas. I’ve already been finding inspiration for my color scheme this year in the form of acorns, snowflakes, owls, and other wintery-woodland things, so I figured: why not see if I can fill up the inevitable empty parts of my tree with what I have on hand, rather than buying a bunch of new ornaments? I also just happened upon a set of carving bits for my Dremel and have been itching to experiment with epoxy/inlays/resins, so I started playing around until this happened:

And as a fun little bonus: I actually made a video of it too!

Tools and Materials

affiliate links of items I recommend and use are listed in this post, which support this site at no cost to you… thanks!

scrap wood (I had 1″ x 4″ poplar)

scissors

printer paper

inkjet printer

acetone or nail polish remover

Dremel 200

Dremel engraving/carving kit

band saw or scroll saw

random orbit sander

wood stain (I used Minwax Ipswich Pine and washed while it was still wet with Early American… I’ll have to show you guys more about this as I’ve done it a number of times to get the colors I like)

Mod Podge

small detail paint brush

Miss Mustard Seed’s German Glass Glitter in Silver Tiara

Martha Stewart Crafts extra fine glitter in Smoky Quartz

clear spray sealer (gloss)

small drill bit

thread (I used stuff from my cross stitch stash)

First things first: print out the image (mine is available for download near the end of the post) and cut it out. I used a scrap piece of poplar that was bound for the burn pile, so I wasn’t really expecting perfection (in fact as you can see, I first used a different image that was WAY too intricate for a first-time experiment and then decided on the final design).

To transfer the ink from the printer paper, I swabbed the back with an acetone nail polish remover. As you can see, the image didn’t transfer perfectly, but it was good enough (I got the idea from my buddy Brad’s video here — then went with the option that wouldn’t require changing out of my pajama pants or going into the cold garage that morning).

Next, I took out my Dremel and a new engraving/carving set I’d recently purchased for another inlay project. In my opinion, crafting is a good intro before graduating to larger pieces, so I figured this would help me practice with diamond tips, how to control the carve, etc. A good method is to create the hard outline first, then carve out the middle, and continue to make the inlay deeper and deeper until it’s got enough depth to hold the inlay material (glitter, epoxy I assume, whatever).

Next, I sketched out the overall shape (spoiler: it wasn’t at all even, so I highly recommend using the template) and then went to cut out the piece. And this is when it seemed like things were conspiring against me: my new scroll saw was broken… right out of the box. Womp, womp.

To make the situation a little stickier, I was about 5 hours away at this point from needing to head out of town to Raleigh, NC (recap here), and I had no other tools that would give me the right depth and shape. Disappointed but undeterred, I figured the next best thing would be to ask to borrow tools from the person I’d be visiting (thankfully, it was a trip to visit some DIY blogging friends just for fun — my pal Brittany just so happened to have a band saw in her garage). Of course, now I want one of those, too.

Of course, I’d never actually used a band saw before, so despite the general don’t-cut-your-fingers-off rule, the piece still came out a little wonky (mostly due to my non-templating sketch). I was able to shape it a little more with an orbital sander. I also carved the edges out a little more and did a final sanding with high grit sandpaper before stain.

Since the overall concept was to make this look like an inlay, I wanted to use glitter with a little more grit and sparkle: enter, German glass glitter. It’s really amazing stuff in person. To paint it into place, I relied on a small paint brush (tip: if the brush starts to fray a little, spin it as you’re dipping it into the glue to get the point fine again… check out my video to see a demo of that).

You can layer the glitter in, too: after giving it some time to dry, paint another bit of glue on top of the glitter and add more into the recessed areas. It will add depth!

I added extra-fine gold glitter around the edge and sealed the whole thing with a clear gloss spray, then drilled a hole through the top and threaded it so it could hang on the tree.

Caveat: before I sealed with a clear gloss, I actually tried to seal with an old polycrylic which unfortunately made the top and bottom tips look faded/cloudy once it dried. At first I thought I’d lean into the mistake by painting the back and sides with chalk paint and sanding to make it look rustic, but it looked really sad instead and totally detracted from the sparkle on the front. I wanted to get this done in time for the blog hop, so I just continued on with sealing again and adding the glitter around the edge. So, if you try a project like this, don’t make my mistake and you’ll get even better results!

You can also try other inlay methods, other glitter colors, fill in the center vs the outer rings with opposite hues, etc… the possibilities are pretty endless!

All in all, I think it’s going to make a nice addition to my white/gold/chrome/woodland Christmas decor theme this year (and the less I need to spend on ornaments, the more budget I have to make Christmas cocktails, hehe).

Want to try this for yourself? You can download my template here.

To be perfectly frank, I think the photos really don’t do the sparkle on this piece enough justice (in fact, I worried that it was looking too drab in photos). So, I made a video tutorial too (I’d love it if you subscribed if you haven’t already… with what I’ve learned in making this tutorial, there is more to come no doubt!).

As I mentioned, this DIY was part of a blog hop, with 25 other bloggers participating — aka, enough DIY Christmas ideas to keep you busy right up until the actual holiday (if you were so ambitiously inclined). So, check out a preview of the other projects and bloggers participating in the images below. You can also head over to the Remodelaholic post (who is hosting this hop) to check out other DIYers submitting their inspired ideas (on social media, you can look for #CreativeChristmas to find them all).

DIY Christmas Trees and Ornaments

Wintry Silver Dollar Store Christmas Tree Decor | Remodelaholic Marbled Christmas Ornaments | Doodlecraft Scrap Wood Inlay Ornaments | The Ugly Duckling House (you’re here!) Woodburned Wood Slice Ornaments | Sisters What Flocked Pine Cones | Practical and Pretty Abstract Monogram Ornaments | Domicile37 Concrete Christmas Ornaments | The Palette Muse Wood Slice Deer Ornaments | Our Crafty Mom Vintage Gumball Machine Ornaments | Beth Watson Design Studio Etched Glass Ornaments | Just Call Me Homegirl Unicorn Inspired Christmas Tree | The DIY Mommy Driftwood Reindeer Ornaments | Sustain My Craft Habit

DIY Christmas Gifts and Decor

Christmas Pine Hoop Wreath | This Mama’s Dance Gingerbread Man Candles | Nourish and Nestle Wire and Glass Chandelier | Home with Cupcakes and Crinoline Christmas Scroll Wall Art | Grace In My Space Lighted Wood Trees | Frazzled Joy Crocheted Christmas Hat | Luz Patterns Christmas Card Photo Display| Hertoolbelt JOY Porch Sign | Ginger Snap Crafts Folding Bar Cart Table | Everyday Party Magazine Wood and Burlap Christmas Sign | Leap of Faith Crafting Wood Block Snowman | Anika’s DIY Life Holiday Candle Wrap | Dragonfly & Lily Pads Christmas Pom Pom Pillow | Small Home Soul Handlettered Wall Art | Smiling Colors

Those of us who did videos for this hop can be found in the playlist below, so those of you who would rather watch than read (or just want to blow off work for a few more minutes) have something, too! *If you’re having difficulty playing it, you can jump over to the playlist here.*

There you have it! Hope you’re getting into the holiday spirit just in time. Will you be working on any decor ideas this Christmas? This is going to be a very busy holiday season for me, so be sure to check back in for more DIYs (I’m going to give that epoxy inlay idea a shot, and a few more scrap ideas are just bubbling in the ol’ brain). Have a great weekend!

You'll Also Love

25 Great Gift Ideas for the Craft Beer Lover

DIY Wooden Couch Sleeve

It’s Pronounced “Damn Good Cookie̶...

Lots of Sneak Peeks: Riding the Buildathon Wave

.yuzo_related_post img{width:170px !important; height:170px !important;} .yuzo_related_post .relatedthumb{line-height:14px;background:#ffffff !important;color:#454747!important;} .yuzo_related_post .relatedthumb:hover{background:#ffffff !important; -webkit-transition: background 0.2s linear; -moz-transition: background 0.2s linear; -o-transition: background 0.2s linear; transition: background 0.2s linear;;color:#454747!important;} .yuzo_related_post .relatedthumb a{color:#102a3b!important;} .yuzo_related_post .relatedthumb a:hover{ color:#113f5e}!important;} .yuzo_related_post .relatedthumb:hover a{ color:#113f5e!important;} .yuzo_related_post .relatedthumb:hover .yuzo__text--title{ color:#113f5e!important;} .yuzo_related_post .yuzo_text, .yuzo_related_post .yuzo_views_post {color:#454747!important;} .yuzo_related_post .relatedthumb:hover .yuzo_text, .yuzo_related_post:hover .yuzo_views_post {color:#454747!important;} .yuzo_related_post .relatedthumb{ margin: 0px 6px 0px 6px; padding: 0px 0px 0px 0px; } jQuery(document).ready(function( $ ){ jQuery('.yuzo_related_post .yuzo_wraps').equalizer({ columns : '> div' }); });

The post Wood Inlay Ornament with German Glass Glitter appeared first on The Ugly Duckling House.

Website // Subscribe // Advertise // Twitter // Facebook // Google+

from The Ugly Duckling House https://www.uglyducklinghouse.com/wood-inlay-ornament-german-glass-glitter/

[darensmurray]

Wood Inlay Ornament with German Glass Glitter

Hi friends! And hi to new friends visiting from the #CreativeChristmas Challenge hosted by Remodelaholic!

To those of you who don’t know me yet: welcome. Everyone else has already started drinking and saying really embarrassing things (about themselves, not you… we’re not a super judgmental bunch). To those of you who already know me: cheers. As always, you rock. And I was just kidding about the drinking thing (unless it’s football season and a Saturday, which yes to both).

Anyway, from time to time, I like to throw my hat in on a DIY challenge or two because nothing excuses buying more power tools like overcommitting to a deadline for fun (like the 2×4 summer challenge and boom: new coffee table!). This time around, the theme was making something for Christmas. I’ve already been finding inspiration for my color scheme this year in the form of acorns, snowflakes, owls, and other wintery-woodland things, so I figured: why not see if I can fill up the inevitable empty parts of my tree with what I have on hand, rather than buying a bunch of new ornaments? I also just happened upon a set of carving bits for my Dremel and have been itching to experiment with epoxy/inlays/resins, so I started playing around until this happened:

And as a fun little bonus: I actually made a video of it too!

Tools and Materials

affiliate links of items I recommend and use are listed in this post, which support this site at no cost to you… thanks!

scrap wood (I had 1″ x 4″ poplar)

scissors

printer paper

inkjet printer

acetone or nail polish remover

Dremel 200

Dremel engraving/carving kit

band saw or scroll saw

random orbit sander

wood stain (I used Minwax Ipswich Pine and washed while it was still wet with Early American… I’ll have to show you guys more about this as I’ve done it a number of times to get the colors I like)

Mod Podge

small detail paint brush

Miss Mustard Seed’s German Glass Glitter in Silver Tiara

Martha Stewart Crafts extra fine glitter in Smoky Quartz

clear spray sealer (gloss)

small drill bit

thread (I used stuff from my cross stitch stash)

First things first: print out the image (mine is available for download near the end of the post) and cut it out. I used a scrap piece of poplar that was bound for the burn pile, so I wasn’t really expecting perfection (in fact as you can see, I first used a different image that was WAY too intricate for a first-time experiment and then decided on the final design).

To transfer the ink from the printer paper, I swabbed the back with an acetone nail polish remover. As you can see, the image didn’t transfer perfectly, but it was good enough (I got the idea from my buddy Brad’s video here — then went with the option that wouldn’t require changing out of my pajama pants or going into the cold garage that morning).

Next, I took out my Dremel and a new engraving/carving set I’d recently purchased for another inlay project. In my opinion, crafting is a good intro before graduating to larger pieces, so I figured this would help me practice with diamond tips, how to control the carve, etc. A good method is to create the hard outline first, then carve out the middle, and continue to make the inlay deeper and deeper until it’s got enough depth to hold the inlay material (glitter, epoxy I assume, whatever).

Next, I sketched out the overall shape (spoiler: it wasn’t at all even, so I highly recommend using the template) and then went to cut out the piece. And this is when it seemed like things were conspiring against me: my new scroll saw was broken… right out of the box. Womp, womp.

To make the situation a little stickier, I was about 5 hours away at this point from needing to head out of town to Raleigh, NC (recap here), and I had no other tools that would give me the right depth and shape. Disappointed but undeterred, I figured the next best thing would be to ask to borrow tools from the person I’d be visiting (thankfully, it was a trip to visit some DIY blogging friends just for fun — my pal Brittany just so happened to have a band saw in her garage). Of course, now I want one of those, too.

Of course, I’d never actually used a band saw before, so despite the general don’t-cut-your-fingers-off rule, the piece still came out a little wonky (mostly due to my non-templating sketch). I was able to shape it a little more with an orbital sander. I also carved the edges out a little more and did a final sanding with high grit sandpaper before stain.

Since the overall concept was to make this look like an inlay, I wanted to use glitter with a little more grit and sparkle: enter, German glass glitter. It’s really amazing stuff in person. To paint it into place, I relied on a small paint brush (tip: if the brush starts to fray a little, spin it as you’re dipping it into the glue to get the point fine again… check out my video to see a demo of that).

You can layer the glitter in, too: after giving it some time to dry, paint another bit of glue on top of the glitter and add more into the recessed areas. It will add depth!

I added extra-fine gold glitter around the edge and sealed the whole thing with a clear gloss spray, then drilled a hole through the top and threaded it so it could hang on the tree.

Caveat: before I sealed with a clear gloss, I actually tried to seal with an old polycrylic which unfortunately made the top and bottom tips look faded/cloudy once it dried. At first I thought I’d lean into the mistake by painting the back and sides with chalk paint and sanding to make it look rustic, but it looked really sad instead and totally detracted from the sparkle on the front. I wanted to get this done in time for the blog hop, so I just continued on with sealing again and adding the glitter around the edge. So, if you try a project like this, don’t make my mistake and you’ll get even better results!

You can also try other inlay methods, other glitter colors, fill in the center vs the outer rings with opposite hues, etc… the possibilities are pretty endless!

All in all, I think it’s going to make a nice addition to my white/gold/chrome/woodland Christmas decor theme this year (and the less I need to spend on ornaments, the more budget I have to make Christmas cocktails, hehe).

Want to try this for yourself? You can download my template here.

To be perfectly frank, I think the photos really don’t do the sparkle on this piece enough justice (in fact, I worried that it was looking too drab in photos). So, I made a video tutorial too (I’d love it if you subscribed if you haven’t already… with what I’ve learned in making this tutorial, there is more to come no doubt!).

As I mentioned, this DIY was part of a blog hop, with 25 other bloggers participating — aka, enough DIY Christmas ideas to keep you busy right up until the actual holiday (if you were so ambitiously inclined). So, check out a preview of the other projects and bloggers participating in the images below. You can also head over to the Remodelaholic post (who is hosting this hop) to check out other DIYers submitting their inspired ideas (on social media, you can look for #CreativeChristmas to find them all).

DIY Christmas Trees and Ornaments

Wintry Silver Dollar Store Christmas Tree Decor | Remodelaholic Marbled Christmas Ornaments | Doodlecraft Scrap Wood Inlay Ornaments | The Ugly Duckling House (you’re here!) Woodburned Wood Slice Ornaments | Sisters What Flocked Pine Cones | Practical and Pretty Abstract Monogram Ornaments | Domicile37 Concrete Christmas Ornaments | The Palette Muse Wood Slice Deer Ornaments | Our Crafty Mom Vintage Gumball Machine Ornaments | Beth Watson Design Studio Etched Glass Ornaments | Just Call Me Homegirl Unicorn Inspired Christmas Tree | The DIY Mommy Driftwood Reindeer Ornaments | Sustain My Craft Habit

DIY Christmas Gifts and Decor

Christmas Pine Hoop Wreath | This Mama’s Dance Gingerbread Man Candles | Nourish and Nestle Wire and Glass Chandelier | Home with Cupcakes and Crinoline Christmas Scroll Wall Art | Grace In My Space Lighted Wood Trees | Frazzled Joy Crocheted Christmas Hat | Luz Patterns Christmas Card Photo Display| Hertoolbelt JOY Porch Sign | Ginger Snap Crafts Folding Bar Cart Table | Everyday Party Magazine Wood and Burlap Christmas Sign | Leap of Faith Crafting Wood Block Snowman | Anika’s DIY Life Holiday Candle Wrap | Dragonfly & Lily Pads Christmas Pom Pom Pillow | Small Home Soul Handlettered Wall Art | Smiling Colors

Those of us who did videos for this hop can be found in the playlist below, so those of you who would rather watch than read (or just want to blow off work for a few more minutes) have something, too! *If you’re having difficulty playing it, you can jump over to the playlist here.*

There you have it! Hope you’re getting into the holiday spirit just in time. Will you be working on any decor ideas this Christmas? This is going to be a very busy holiday season for me, so be sure to check back in for more DIYs (I’m going to give that epoxy inlay idea a shot, and a few more scrap ideas are just bubbling in the ol’ brain). Have a great weekend!

You'll Also Love

25 Great Gift Ideas for the Craft Beer Lover

DIY Wooden Couch Sleeve

It’s Pronounced “Damn Good Cookie̶...

Lots of Sneak Peeks: Riding the Buildathon Wave

.yuzo_related_post img{width:170px !important; height:170px !important;} .yuzo_related_post .relatedthumb{line-height:14px;background:#ffffff !important;color:#454747!important;} .yuzo_related_post .relatedthumb:hover{background:#ffffff !important; -webkit-transition: background 0.2s linear; -moz-transition: background 0.2s linear; -o-transition: background 0.2s linear; transition: background 0.2s linear;;color:#454747!important;} .yuzo_related_post .relatedthumb a{color:#102a3b!important;} .yuzo_related_post .relatedthumb a:hover{ color:#113f5e}!important;} .yuzo_related_post .relatedthumb:hover a{ color:#113f5e!important;} .yuzo_related_post .relatedthumb:hover .yuzo__text--title{ color:#113f5e!important;} .yuzo_related_post .yuzo_text, .yuzo_related_post .yuzo_views_post {color:#454747!important;} .yuzo_related_post .relatedthumb:hover .yuzo_text, .yuzo_related_post:hover .yuzo_views_post {color:#454747!important;} .yuzo_related_post .relatedthumb{ margin: 0px 6px 0px 6px; padding: 0px 0px 0px 0px; } jQuery(document).ready(function( $ ){ jQuery('.yuzo_related_post .yuzo_wraps').equalizer({ columns : '> div' }); });

The post Wood Inlay Ornament with German Glass Glitter appeared first on The Ugly Duckling House.

Website // Subscribe // Advertise // Twitter // Facebook // Google+

[petraself]

Wood Inlay Ornament with German Glass Glitter

Hi friends! And hi to new friends visiting from the #CreativeChristmas Challenge hosted by Remodelaholic!

To those of you who don’t know me yet: welcome. Everyone else has already started drinking and saying really embarrassing things (about themselves, not you… we’re not a super judgmental bunch). To those of you who already know me: cheers. As always, you rock. And I was just kidding about the drinking thing (unless it’s football season and a Saturday, which yes to both).

Anyway, from time to time, I like to throw my hat in on a DIY challenge or two because nothing excuses buying more power tools like overcommitting to a deadline for fun (like the 2×4 summer challenge and boom: new coffee table!). This time around, the theme was making something for Christmas. I’ve already been finding inspiration for my color scheme this year in the form of acorns, snowflakes, owls, and other wintery-woodland things, so I figured: why not see if I can fill up the inevitable empty parts of my tree with what I have on hand, rather than buying a bunch of new ornaments? I also just happened upon a set of carving bits for my Dremel and have been itching to experiment with epoxy/inlays/resins, so I started playing around until this happened:

And as a fun little bonus: I actually made a video of it too!

Tools and Materials

affiliate links of items I recommend and use are listed in this post, which support this site at no cost to you… thanks!

scrap wood (I had 1″ x 4″ poplar)

scissors

printer paper

inkjet printer

acetone or nail polish remover

Dremel 200

Dremel engraving/carving kit

band saw or scroll saw

random orbit sander

wood stain (I used Minwax Ipswich Pine and washed while it was still wet with Early American… I’ll have to show you guys more about this as I’ve done it a number of times to get the colors I like)

Mod Podge

small detail paint brush

Miss Mustard Seed’s German Glass Glitter in Silver Tiara

Martha Stewart Crafts extra fine glitter in Smoky Quartz

clear spray sealer (gloss)

small drill bit

thread (I used stuff from my cross stitch stash)

First things first: print out the image (mine is available for download near the end of the post) and cut it out. I used a scrap piece of poplar that was bound for the burn pile, so I wasn’t really expecting perfection (in fact as you can see, I first used a different image that was WAY too intricate for a first-time experiment and then decided on the final design).

To transfer the ink from the printer paper, I swabbed the back with an acetone nail polish remover. As you can see, the image didn’t transfer perfectly, but it was good enough (I got the idea from my buddy Brad’s video here — then went with the option that wouldn’t require changing out of my pajama pants or going into the cold garage that morning).

Next, I took out my Dremel and a new engraving/carving set I’d recently purchased for another inlay project. In my opinion, crafting is a good intro before graduating to larger pieces, so I figured this would help me practice with diamond tips, how to control the carve, etc. A good method is to create the hard outline first, then carve out the middle, and continue to make the inlay deeper and deeper until it’s got enough depth to hold the inlay material (glitter, epoxy I assume, whatever).

Next, I sketched out the overall shape (spoiler: it wasn’t at all even, so I highly recommend using the template) and then went to cut out the piece. And this is when it seemed like things were conspiring against me: my new scroll saw was broken… right out of the box. Womp, womp.

To make the situation a little stickier, I was about 5 hours away at this point from needing to head out of town to Raleigh, NC (recap here), and I had no other tools that would give me the right depth and shape. Disappointed but undeterred, I figured the next best thing would be to ask to borrow tools from the person I’d be visiting (thankfully, it was a trip to visit some DIY blogging friends just for fun — my pal Brittany just so happened to have a band saw in her garage). Of course, now I want one of those, too.

Of course, I’d never actually used a band saw before, so despite the general don’t-cut-your-fingers-off rule, the piece still came out a little wonky (mostly due to my non-templating sketch). I was able to shape it a little more with an orbital sander. I also carved the edges out a little more and did a final sanding with high grit sandpaper before stain.

Since the overall concept was to make this look like an inlay, I wanted to use glitter with a little more grit and sparkle: enter, German glass glitter. It’s really amazing stuff in person. To paint it into place, I relied on a small paint brush (tip: if the brush starts to fray a little, spin it as you’re dipping it into the glue to get the point fine again… check out my video to see a demo of that).

You can layer the glitter in, too: after giving it some time to dry, paint another bit of glue on top of the glitter and add more into the recessed areas. It will add depth!

I added extra-fine gold glitter around the edge and sealed the whole thing with a clear gloss spray, then drilled a hole through the top and threaded it so it could hang on the tree.

Caveat: before I sealed with a clear gloss, I actually tried to seal with an old polycrylic which unfortunately made the top and bottom tips look faded/cloudy once it dried. At first I thought I’d lean into the mistake by painting the back and sides with chalk paint and sanding to make it look rustic, but it looked really sad instead and totally detracted from the sparkle on the front. I wanted to get this done in time for the blog hop, so I just continued on with sealing again and adding the glitter around the edge. So, if you try a project like this, don’t make my mistake and you’ll get even better results!

You can also try other inlay methods, other glitter colors, fill in the center vs the outer rings with opposite hues, etc… the possibilities are pretty endless!

All in all, I think it’s going to make a nice addition to my white/gold/chrome/woodland Christmas decor theme this year (and the less I need to spend on ornaments, the more budget I have to make Christmas cocktails, hehe).

Want to try this for yourself? You can download my template here.

To be perfectly frank, I think the photos really don’t do the sparkle on this piece enough justice (in fact, I worried that it was looking too drab in photos). So, I made a video tutorial too (I’d love it if you subscribed if you haven’t already… with what I’ve learned in making this tutorial, there is more to come no doubt!).

As I mentioned, this DIY was part of a blog hop, with 25 other bloggers participating — aka, enough DIY Christmas ideas to keep you busy right up until the actual holiday (if you were so ambitiously inclined). So, check out a preview of the other projects and bloggers participating in the images below. You can also head over to the Remodelaholic post (who is hosting this hop) to check out other DIYers submitting their inspired ideas (on social media, you can look for #CreativeChristmas to find them all).

DIY Christmas Trees and Ornaments

Wintry Silver Dollar Store Christmas Tree Decor | Remodelaholic Marbled Christmas Ornaments | Doodlecraft Scrap Wood Inlay Ornaments | The Ugly Duckling House (you’re here!) Woodburned Wood Slice Ornaments | Sisters What Flocked Pine Cones | Practical and Pretty Abstract Monogram Ornaments | Domicile37 Concrete Christmas Ornaments | The Palette Muse Wood Slice Deer Ornaments | Our Crafty Mom Vintage Gumball Machine Ornaments | Beth Watson Design Studio Etched Glass Ornaments | Just Call Me Homegirl Unicorn Inspired Christmas Tree | The DIY Mommy Driftwood Reindeer Ornaments | Sustain My Craft Habit

DIY Christmas Gifts and Decor

Christmas Pine Hoop Wreath | This Mama’s Dance Gingerbread Man Candles | Nourish and Nestle Wire and Glass Chandelier | Home with Cupcakes and Crinoline Christmas Scroll Wall Art | Grace In My Space Lighted Wood Trees | Frazzled Joy Crocheted Christmas Hat | Luz Patterns Christmas Card Photo Display| Hertoolbelt JOY Porch Sign | Ginger Snap Crafts Folding Bar Cart Table | Everyday Party Magazine Wood and Burlap Christmas Sign | Leap of Faith Crafting Wood Block Snowman | Anika’s DIY Life Holiday Candle Wrap | Dragonfly & Lily Pads Christmas Pom Pom Pillow | Small Home Soul Handlettered Wall Art | Smiling Colors

Those of us who did videos for this hop can be found in the playlist below, so those of you who would rather watch than read (or just want to blow off work for a few more minutes) have something, too! *If you’re having difficulty playing it, you can jump over to the playlist here.*

There you have it! Hope you’re getting into the holiday spirit just in time. Will you be working on any decor ideas this Christmas? This is going to be a very busy holiday season for me, so be sure to check back in for more DIYs (I’m going to give that epoxy inlay idea a shot, and a few more scrap ideas are just bubbling in the ol’ brain). Have a great weekend!

You'll Also Love

25 Great Gift Ideas for the Craft Beer Lover

DIY Wooden Couch Sleeve

It’s Pronounced “Damn Good Cookie̶...

Lots of Sneak Peeks: Riding the Buildathon Wave

.yuzo_related_post img{width:170px !important; height:170px !important;} .yuzo_related_post .relatedthumb{line-height:14px;background:#ffffff !important;color:#454747!important;} .yuzo_related_post .relatedthumb:hover{background:#ffffff !important; -webkit-transition: background 0.2s linear; -moz-transition: background 0.2s linear; -o-transition: background 0.2s linear; transition: background 0.2s linear;;color:#454747!important;} .yuzo_related_post .relatedthumb a{color:#102a3b!important;} .yuzo_related_post .relatedthumb a:hover{ color:#113f5e}!important;} .yuzo_related_post .relatedthumb:hover a{ color:#113f5e!important;} .yuzo_related_post .relatedthumb:hover .yuzo__text--title{ color:#113f5e!important;} .yuzo_related_post .yuzo_text, .yuzo_related_post .yuzo_views_post {color:#454747!important;} .yuzo_related_post .relatedthumb:hover .yuzo_text, .yuzo_related_post:hover .yuzo_views_post {color:#454747!important;} .yuzo_related_post .relatedthumb{ margin: 0px 6px 0px 6px; padding: 0px 0px 0px 0px; } jQuery(document).ready(function( $ ){ jQuery('.yuzo_related_post .yuzo_wraps').equalizer({ columns : '> div' }); });

The post Wood Inlay Ornament with German Glass Glitter appeared first on The Ugly Duckling House.

Website // Subscribe // Advertise // Twitter // Facebook // Google+

Wood Inlay Ornament with German Glass Glitter published first on http://ift.tt/1kI9W8s

[endlessarchite]

Wood Inlay Ornament with German Glass Glitter

Hi friends! And hi to new friends visiting from the #CreativeChristmas Challenge hosted by Remodelaholic!

To those of you who don’t know me yet: welcome. Everyone else has already started drinking and saying really embarrassing things (about themselves, not you… we’re not a super judgmental bunch). To those of you who already know me: cheers. As always, you rock. And I was just kidding about the drinking thing (unless it’s football season and a Saturday, which yes to both).

Anyway, from time to time, I like to throw my hat in on a DIY challenge or two because nothing excuses buying more power tools like overcommitting to a deadline for fun (like the 2×4 summer challenge and boom: new coffee table!). This time around, the theme was making something for Christmas. I’ve already been finding inspiration for my color scheme this year in the form of acorns, snowflakes, owls, and other wintery-woodland things, so I figured: why not see if I can fill up the inevitable empty parts of my tree with what I have on hand, rather than buying a bunch of new ornaments? I also just happened upon a set of carving bits for my Dremel and have been itching to experiment with epoxy/inlays/resins, so I started playing around until this happened:

And as a fun little bonus: I actually made a video of it too!

Tools and Materials

affiliate links of items I recommend and use are listed in this post, which support this site at no cost to you… thanks!

scrap wood (I had 1″ x 4″ poplar)

scissors

printer paper

inkjet printer

acetone or nail polish remover

Dremel 200

Dremel engraving/carving kit

band saw or scroll saw

random orbit sander

wood stain (I used Minwax Ipswich Pine and washed while it was still wet with Early American… I’ll have to show you guys more about this as I’ve done it a number of times to get the colors I like)

Mod Podge

small detail paint brush

Miss Mustard Seed’s German Glass Glitter in Silver Tiara

Martha Stewart Crafts extra fine glitter in Smoky Quartz

clear spray sealer (gloss)

small drill bit

thread (I used stuff from my cross stitch stash)

First things first: print out the image (mine is available for download near the end of the post) and cut it out. I used a scrap piece of poplar that was bound for the burn pile, so I wasn’t really expecting perfection (in fact as you can see, I first used a different image that was WAY too intricate for a first-time experiment and then decided on the final design).

To transfer the ink from the printer paper, I swabbed the back with an acetone nail polish remover. As you can see, the image didn’t transfer perfectly, but it was good enough (I got the idea from my buddy Brad’s video here — then went with the option that wouldn’t require changing out of my pajama pants or going into the cold garage that morning).

Next, I took out my Dremel and a new engraving/carving set I’d recently purchased for another inlay project. In my opinion, crafting is a good intro before graduating to larger pieces, so I figured this would help me practice with diamond tips, how to control the carve, etc. A good method is to create the hard outline first, then carve out the middle, and continue to make the inlay deeper and deeper until it’s got enough depth to hold the inlay material (glitter, epoxy I assume, whatever).

Next, I sketched out the overall shape (spoiler: it wasn’t at all even, so I highly recommend using the template) and then went to cut out the piece. And this is when it seemed like things were conspiring against me: my new scroll saw was broken… right out of the box. Womp, womp.

To make the situation a little stickier, I was about 5 hours away at this point from needing to head out of town to Raleigh, NC (recap here), and I had no other tools that would give me the right depth and shape. Disappointed but undeterred, I figured the next best thing would be to ask to borrow tools from the person I’d be visiting (thankfully, it was a trip to visit some DIY blogging friends just for fun — my pal Brittany just so happened to have a band saw in her garage). Of course, now I want one of those, too.

Of course, I’d never actually used a band saw before, so despite the general don’t-cut-your-fingers-off rule, the piece still came out a little wonky (mostly due to my non-templating sketch). I was able to shape it a little more with an orbital sander. I also carved the edges out a little more and did a final sanding with high grit sandpaper before stain.

Since the overall concept was to make this look like an inlay, I wanted to use glitter with a little more grit and sparkle: enter, German glass glitter. It’s really amazing stuff in person. To paint it into place, I relied on a small paint brush (tip: if the brush starts to fray a little, spin it as you’re dipping it into the glue to get the point fine again… check out my video to see a demo of that).

You can layer the glitter in, too: after giving it some time to dry, paint another bit of glue on top of the glitter and add more into the recessed areas. It will add depth!

I added extra-fine gold glitter around the edge and sealed the whole thing with a clear gloss spray, then drilled a hole through the top and threaded it so it could hang on the tree.

Caveat: before I sealed with a clear gloss, I actually tried to seal with an old polycrylic which unfortunately made the top and bottom tips look faded/cloudy once it dried. At first I thought I’d lean into the mistake by painting the back and sides with chalk paint and sanding to make it look rustic, but it looked really sad instead and totally detracted from the sparkle on the front. I wanted to get this done in time for the blog hop, so I just continued on with sealing again and adding the glitter around the edge. So, if you try a project like this, don’t make my mistake and you’ll get even better results!

You can also try other inlay methods, other glitter colors, fill in the center vs the outer rings with opposite hues, etc… the possibilities are pretty endless!

All in all, I think it’s going to make a nice addition to my white/gold/chrome/woodland Christmas decor theme this year (and the less I need to spend on ornaments, the more budget I have to make Christmas cocktails, hehe).

Want to try this for yourself? You can download my template here.

To be perfectly frank, I think the photos really don’t do the sparkle on this piece enough justice (in fact, I worried that it was looking too drab in photos). So, I made a video tutorial too (I’d love it if you subscribed if you haven’t already… with what I’ve learned in making this tutorial, there is more to come no doubt!).

As I mentioned, this DIY was part of a blog hop, with 25 other bloggers participating — aka, enough DIY Christmas ideas to keep you busy right up until the actual holiday (if you were so ambitiously inclined). So, check out a preview of the other projects and bloggers participating in the images below. You can also head over to the Remodelaholic post (who is hosting this hop) to check out other DIYers submitting their inspired ideas (on social media, you can look for #CreativeChristmas to find them all).

DIY Christmas Trees and Ornaments

Wintry Silver Dollar Store Christmas Tree Decor | Remodelaholic Marbled Christmas Ornaments | Doodlecraft Scrap Wood Inlay Ornaments | The Ugly Duckling House (you’re here!) Woodburned Wood Slice Ornaments | Sisters What Flocked Pine Cones | Practical and Pretty Abstract Monogram Ornaments | Domicile37 Concrete Christmas Ornaments | The Palette Muse Wood Slice Deer Ornaments | Our Crafty Mom Vintage Gumball Machine Ornaments | Beth Watson Design Studio Etched Glass Ornaments | Just Call Me Homegirl Unicorn Inspired Christmas Tree | The DIY Mommy Driftwood Reindeer Ornaments | Sustain My Craft Habit

DIY Christmas Gifts and Decor

Christmas Pine Hoop Wreath | This Mama’s Dance Gingerbread Man Candles | Nourish and Nestle Wire and Glass Chandelier | Home with Cupcakes and Crinoline Christmas Scroll Wall Art | Grace In My Space Lighted Wood Trees | Frazzled Joy Crocheted Christmas Hat | Luz Patterns Christmas Card Photo Display| Hertoolbelt JOY Porch Sign | Ginger Snap Crafts Folding Bar Cart Table | Everyday Party Magazine Wood and Burlap Christmas Sign | Leap of Faith Crafting Wood Block Snowman | Anika’s DIY Life Holiday Candle Wrap | Dragonfly & Lily Pads Christmas Pom Pom Pillow | Small Home Soul Handlettered Wall Art | Smiling Colors

Those of us who did videos for this hop can be found in the playlist below, so those of you who would rather watch than read (or just want to blow off work for a few more minutes) have something, too! *If you’re having difficulty playing it, you can jump over to the playlist here.*

There you have it! Hope you’re getting into the holiday spirit just in time. Will you be working on any decor ideas this Christmas? This is going to be a very busy holiday season for me, so be sure to check back in for more DIYs (I’m going to give that epoxy inlay idea a shot, and a few more scrap ideas are just bubbling in the ol’ brain). Have a great weekend!

You'll Also Love

25 Great Gift Ideas for the Craft Beer Lover

DIY Wooden Couch Sleeve

It’s Pronounced “Damn Good Cookie̶...

Lots of Sneak Peeks: Riding the Buildathon Wave

.yuzo_related_post img{width:170px !important; height:170px !important;} .yuzo_related_post .relatedthumb{line-height:14px;background:#ffffff !important;color:#454747!important;} .yuzo_related_post .relatedthumb:hover{background:#ffffff !important; -webkit-transition: background 0.2s linear; -moz-transition: background 0.2s linear; -o-transition: background 0.2s linear; transition: background 0.2s linear;;color:#454747!important;} .yuzo_related_post .relatedthumb a{color:#102a3b!important;} .yuzo_related_post .relatedthumb a:hover{ color:#113f5e}!important;} .yuzo_related_post .relatedthumb:hover a{ color:#113f5e!important;} .yuzo_related_post .relatedthumb:hover .yuzo__text--title{ color:#113f5e!important;} .yuzo_related_post .yuzo_text, .yuzo_related_post .yuzo_views_post {color:#454747!important;} .yuzo_related_post .relatedthumb:hover .yuzo_text, .yuzo_related_post:hover .yuzo_views_post {color:#454747!important;} .yuzo_related_post .relatedthumb{ margin: 0px 6px 0px 6px; padding: 0px 0px 0px 0px; } jQuery(document).ready(function( $ ){ jQuery('.yuzo_related_post .yuzo_wraps').equalizer({ columns : '> div' }); });

The post Wood Inlay Ornament with German Glass Glitter appeared first on The Ugly Duckling House.

Website // Subscribe // Advertise // Twitter // Facebook // Google+

Wood Inlay Ornament with German Glass Glitter published first on http://ift.tt/2qxZz2j

[endlessarchite]

Wood Inlay Ornament with German Glass Glitter

Hi friends! And hi to new friends visiting from the #CreativeChristmas Challenge hosted by Remodelaholic!

To those of you who don’t know me yet: welcome. Everyone else has already started drinking and saying really embarrassing things (about themselves, not you… we’re not a super judgmental bunch). To those of you who already know me: cheers. As always, you rock. And I was just kidding about the drinking thing (unless it’s football season and a Saturday, which yes to both).

Anyway, from time to time, I like to throw my hat in on a DIY challenge or two because nothing excuses buying more power tools like overcommitting to a deadline for fun (like the 2×4 summer challenge and boom: new coffee table!). This time around, the theme was making something for Christmas. I’ve already been finding inspiration for my color scheme this year in the form of acorns, snowflakes, owls, and other wintery-woodland things, so I figured: why not see if I can fill up the inevitable empty parts of my tree with what I have on hand, rather than buying a bunch of new ornaments? I also just happened upon a set of carving bits for my Dremel and have been itching to experiment with epoxy/inlays/resins, so I started playing around until this happened:

And as a fun little bonus: I actually made a video of it too!

Tools and Materials

affiliate links of items I recommend and use are listed in this post, which support this site at no cost to you… thanks!

scrap wood (I had 1″ x 4″ poplar)

scissors

printer paper

inkjet printer

acetone or nail polish remover

Dremel 200

Dremel engraving/carving kit

band saw or scroll saw

random orbit sander

wood stain (I used Minwax Ipswich Pine and washed while it was still wet with Early American… I’ll have to show you guys more about this as I’ve done it a number of times to get the colors I like)

Mod Podge

small detail paint brush

Miss Mustard Seed’s German Glass Glitter in Silver Tiara

Martha Stewart Crafts extra fine glitter in Smoky Quartz

clear spray sealer (gloss)

small drill bit

thread (I used stuff from my cross stitch stash)

First things first: print out the image (mine is available for download near the end of the post) and cut it out. I used a scrap piece of poplar that was bound for the burn pile, so I wasn’t really expecting perfection (in fact as you can see, I first used a different image that was WAY too intricate for a first-time experiment and then decided on the final design).

To transfer the ink from the printer paper, I swabbed the back with an acetone nail polish remover. As you can see, the image didn’t transfer perfectly, but it was good enough (I got the idea from my buddy Brad’s video here — then went with the option that wouldn’t require changing out of my pajama pants or going into the cold garage that morning).

Next, I took out my Dremel and a new engraving/carving set I’d recently purchased for another inlay project. In my opinion, crafting is a good intro before graduating to larger pieces, so I figured this would help me practice with diamond tips, how to control the carve, etc. A good method is to create the hard outline first, then carve out the middle, and continue to make the inlay deeper and deeper until it’s got enough depth to hold the inlay material (glitter, epoxy I assume, whatever).

Next, I sketched out the overall shape (spoiler: it wasn’t at all even, so I highly recommend using the template) and then went to cut out the piece. And this is when it seemed like things were conspiring against me: my new scroll saw was broken… right out of the box. Womp, womp.

To make the situation a little stickier, I was about 5 hours away at this point from needing to head out of town to Raleigh, NC (recap here), and I had no other tools that would give me the right depth and shape. Disappointed but undeterred, I figured the next best thing would be to ask to borrow tools from the person I’d be visiting (thankfully, it was a trip to visit some DIY blogging friends just for fun — my pal Brittany just so happened to have a band saw in her garage). Of course, now I want one of those, too.

Of course, I’d never actually used a band saw before, so despite the general don’t-cut-your-fingers-off rule, the piece still came out a little wonky (mostly due to my non-templating sketch). I was able to shape it a little more with an orbital sander. I also carved the edges out a little more and did a final sanding with high grit sandpaper before stain.

Since the overall concept was to make this look like an inlay, I wanted to use glitter with a little more grit and sparkle: enter, German glass glitter. It’s really amazing stuff in person. To paint it into place, I relied on a small paint brush (tip: if the brush starts to fray a little, spin it as you’re dipping it into the glue to get the point fine again… check out my video to see a demo of that).

You can layer the glitter in, too: after giving it some time to dry, paint another bit of glue on top of the glitter and add more into the recessed areas. It will add depth!

I added extra-fine gold glitter around the edge and sealed the whole thing with a clear gloss spray, then drilled a hole through the top and threaded it so it could hang on the tree.

Caveat: before I sealed with a clear gloss, I actually tried to seal with an old polycrylic which unfortunately made the top and bottom tips look faded/cloudy once it dried. At first I thought I’d lean into the mistake by painting the back and sides with chalk paint and sanding to make it look rustic, but it looked really sad instead and totally detracted from the sparkle on the front. I wanted to get this done in time for the blog hop, so I just continued on with sealing again and adding the glitter around the edge. So, if you try a project like this, don’t make my mistake and you’ll get even better results!

You can also try other inlay methods, other glitter colors, fill in the center vs the outer rings with opposite hues, etc… the possibilities are pretty endless!

All in all, I think it’s going to make a nice addition to my white/gold/chrome/woodland Christmas decor theme this year (and the less I need to spend on ornaments, the more budget I have to make Christmas cocktails, hehe).

Want to try this for yourself? You can download my template here.

To be perfectly frank, I think the photos really don’t do the sparkle on this piece enough justice (in fact, I worried that it was looking too drab in photos). So, I made a video tutorial too (I’d love it if you subscribed if you haven’t already… with what I’ve learned in making this tutorial, there is more to come no doubt!).

As I mentioned, this DIY was part of a blog hop, with 25 other bloggers participating — aka, enough DIY Christmas ideas to keep you busy right up until the actual holiday (if you were so ambitiously inclined). So, check out a preview of the other projects and bloggers participating in the images below. You can also head over to the Remodelaholic post (who is hosting this hop) to check out other DIYers submitting their inspired ideas (on social media, you can look for #CreativeChristmas to find them all).

DIY Christmas Trees and Ornaments

Wintry Silver Dollar Store Christmas Tree Decor | Remodelaholic Marbled Christmas Ornaments | Doodlecraft Scrap Wood Inlay Ornaments | The Ugly Duckling House (you’re here!) Woodburned Wood Slice Ornaments | Sisters What Flocked Pine Cones | Practical and Pretty Abstract Monogram Ornaments | Domicile37 Concrete Christmas Ornaments | The Palette Muse Wood Slice Deer Ornaments | Our Crafty Mom Vintage Gumball Machine Ornaments | Beth Watson Design Studio Etched Glass Ornaments | Just Call Me Homegirl Unicorn Inspired Christmas Tree | The DIY Mommy Driftwood Reindeer Ornaments | Sustain My Craft Habit

DIY Christmas Gifts and Decor

Christmas Pine Hoop Wreath | This Mama’s Dance Gingerbread Man Candles | Nourish and Nestle Wire and Glass Chandelier | Home with Cupcakes and Crinoline Christmas Scroll Wall Art | Grace In My Space Lighted Wood Trees | Frazzled Joy Crocheted Christmas Hat | Luz Patterns Christmas Card Photo Display| Hertoolbelt JOY Porch Sign | Ginger Snap Crafts Folding Bar Cart Table | Everyday Party Magazine Wood and Burlap Christmas Sign | Leap of Faith Crafting Wood Block Snowman | Anika’s DIY Life Holiday Candle Wrap | Dragonfly & Lily Pads Christmas Pom Pom Pillow | Small Home Soul Handlettered Wall Art | Smiling Colors

Those of us who did videos for this hop can be found in the playlist below, so those of you who would rather watch than read (or just want to blow off work for a few more minutes) have something, too! *If you’re having difficulty playing it, you can jump over to the playlist here.*

There you have it! Hope you’re getting into the holiday spirit just in time. Will you be working on any decor ideas this Christmas? This is going to be a very busy holiday season for me, so be sure to check back in for more DIYs (I’m going to give that epoxy inlay idea a shot, and a few more scrap ideas are just bubbling in the ol’ brain). Have a great weekend!

You'll Also Love

25 Great Gift Ideas for the Craft Beer Lover

DIY Wooden Couch Sleeve

It’s Pronounced “Damn Good Cookie̶...

Lots of Sneak Peeks: Riding the Buildathon Wave

.yuzo_related_post img{width:170px !important; height:170px !important;} .yuzo_related_post .relatedthumb{line-height:14px;background:#ffffff !important;color:#454747!important;} .yuzo_related_post .relatedthumb:hover{background:#ffffff !important; -webkit-transition: background 0.2s linear; -moz-transition: background 0.2s linear; -o-transition: background 0.2s linear; transition: background 0.2s linear;;color:#454747!important;} .yuzo_related_post .relatedthumb a{color:#102a3b!important;} .yuzo_related_post .relatedthumb a:hover{ color:#113f5e}!important;} .yuzo_related_post .relatedthumb:hover a{ color:#113f5e!important;} .yuzo_related_post .relatedthumb:hover .yuzo__text--title{ color:#113f5e!important;} .yuzo_related_post .yuzo_text, .yuzo_related_post .yuzo_views_post {color:#454747!important;} .yuzo_related_post .relatedthumb:hover .yuzo_text, .yuzo_related_post:hover .yuzo_views_post {color:#454747!important;} .yuzo_related_post .relatedthumb{ margin: 0px 6px 0px 6px; padding: 0px 0px 0px 0px; } jQuery(document).ready(function( $ ){ jQuery('.yuzo_related_post .yuzo_wraps').equalizer({ columns : '> div' }); });

The post Wood Inlay Ornament with German Glass Glitter appeared first on The Ugly Duckling House.

Website // Subscribe // Advertise // Twitter // Facebook // Google+

Wood Inlay Ornament with German Glass Glitter published first on http://ift.tt/2qxZz2j

[endlessarchite]

Wood Inlay Ornament with German Glass Glitter

Hi friends! And hi to new friends visiting from the #CreativeChristmas Challenge hosted by Remodelaholic!

To those of you who don’t know me yet: welcome. Everyone else has already started drinking and saying really embarrassing things (about themselves, not you… we’re not a super judgmental bunch). To those of you who already know me: cheers. As always, you rock. And I was just kidding about the drinking thing (unless it’s football season and a Saturday, which yes to both).

Anyway, from time to time, I like to throw my hat in on a DIY challenge or two because nothing excuses buying more power tools like overcommitting to a deadline for fun (like the 2×4 summer challenge and boom: new coffee table!). This time around, the theme was making something for Christmas. I’ve already been finding inspiration for my color scheme this year in the form of acorns, snowflakes, owls, and other wintery-woodland things, so I figured: why not see if I can fill up the inevitable empty parts of my tree with what I have on hand, rather than buying a bunch of new ornaments? I also just happened upon a set of carving bits for my Dremel and have been itching to experiment with epoxy/inlays/resins, so I started playing around until this happened:

And as a fun little bonus: I actually made a video of it too!

Tools and Materials

affiliate links of items I recommend and use are listed in this post, which support this site at no cost to you… thanks!

scrap wood (I had 1″ x 4″ poplar)

scissors

printer paper

inkjet printer

acetone or nail polish remover

Dremel 200

Dremel engraving/carving kit

band saw or scroll saw

random orbit sander

wood stain (I used Minwax Ipswich Pine and washed while it was still wet with Early American… I’ll have to show you guys more about this as I’ve done it a number of times to get the colors I like)

Mod Podge

small detail paint brush

Miss Mustard Seed’s German Glass Glitter in Silver Tiara

Martha Stewart Crafts extra fine glitter in Smoky Quartz

clear spray sealer (gloss)

small drill bit

thread (I used stuff from my cross stitch stash)

First things first: print out the image (mine is available for download near the end of the post) and cut it out. I used a scrap piece of poplar that was bound for the burn pile, so I wasn’t really expecting perfection (in fact as you can see, I first used a different image that was WAY too intricate for a first-time experiment and then decided on the final design).

To transfer the ink from the printer paper, I swabbed the back with an acetone nail polish remover. As you can see, the image didn’t transfer perfectly, but it was good enough (I got the idea from my buddy Brad’s video here — then went with the option that wouldn’t require changing out of my pajama pants or going into the cold garage that morning).

Next, I took out my Dremel and a new engraving/carving set I’d recently purchased for another inlay project. In my opinion, crafting is a good intro before graduating to larger pieces, so I figured this would help me practice with diamond tips, how to control the carve, etc. A good method is to create the hard outline first, then carve out the middle, and continue to make the inlay deeper and deeper until it’s got enough depth to hold the inlay material (glitter, epoxy I assume, whatever).

Next, I sketched out the overall shape (spoiler: it wasn’t at all even, so I highly recommend using the template) and then went to cut out the piece. And this is when it seemed like things were conspiring against me: my new scroll saw was broken… right out of the box. Womp, womp.

To make the situation a little stickier, I was about 5 hours away at this point from needing to head out of town to Raleigh, NC (recap here), and I had no other tools that would give me the right depth and shape. Disappointed but undeterred, I figured the next best thing would be to ask to borrow tools from the person I’d be visiting (thankfully, it was a trip to visit some DIY blogging friends just for fun — my pal Brittany just so happened to have a band saw in her garage). Of course, now I want one of those, too.

Of course, I’d never actually used a band saw before, so despite the general don’t-cut-your-fingers-off rule, the piece still came out a little wonky (mostly due to my non-templating sketch). I was able to shape it a little more with an orbital sander. I also carved the edges out a little more and did a final sanding with high grit sandpaper before stain.

Since the overall concept was to make this look like an inlay, I wanted to use glitter with a little more grit and sparkle: enter, German glass glitter. It’s really amazing stuff in person. To paint it into place, I relied on a small paint brush (tip: if the brush starts to fray a little, spin it as you’re dipping it into the glue to get the point fine again… check out my video to see a demo of that).

You can layer the glitter in, too: after giving it some time to dry, paint another bit of glue on top of the glitter and add more into the recessed areas. It will add depth!

I added extra-fine gold glitter around the edge and sealed the whole thing with a clear gloss spray, then drilled a hole through the top and threaded it so it could hang on the tree.

Caveat: before I sealed with a clear gloss, I actually tried to seal with an old polycrylic which unfortunately made the top and bottom tips look faded/cloudy once it dried. At first I thought I’d lean into the mistake by painting the back and sides with chalk paint and sanding to make it look rustic, but it looked really sad instead and totally detracted from the sparkle on the front. I wanted to get this done in time for the blog hop, so I just continued on with sealing again and adding the glitter around the edge. So, if you try a project like this, don’t make my mistake and you’ll get even better results!

You can also try other inlay methods, other glitter colors, fill in the center vs the outer rings with opposite hues, etc… the possibilities are pretty endless!

All in all, I think it’s going to make a nice addition to my white/gold/chrome/woodland Christmas decor theme this year (and the less I need to spend on ornaments, the more budget I have to make Christmas cocktails, hehe).

Want to try this for yourself? You can download my template here.

To be perfectly frank, I think the photos really don’t do the sparkle on this piece enough justice (in fact, I worried that it was looking too drab in photos). So, I made a video tutorial too (I’d love it if you subscribed if you haven’t already… with what I’ve learned in making this tutorial, there is more to come no doubt!).

As I mentioned, this DIY was part of a blog hop, with 25 other bloggers participating — aka, enough DIY Christmas ideas to keep you busy right up until the actual holiday (if you were so ambitiously inclined). So, check out a preview of the other projects and bloggers participating in the images below. You can also head over to the Remodelaholic post (who is hosting this hop) to check out other DIYers submitting their inspired ideas (on social media, you can look for #CreativeChristmas to find them all).

DIY Christmas Trees and Ornaments

Wintry Silver Dollar Store Christmas Tree Decor | Remodelaholic Marbled Christmas Ornaments | Doodlecraft Scrap Wood Inlay Ornaments | The Ugly Duckling House (you’re here!) Woodburned Wood Slice Ornaments | Sisters What Flocked Pine Cones | Practical and Pretty Abstract Monogram Ornaments | Domicile37 Concrete Christmas Ornaments | The Palette Muse Wood Slice Deer Ornaments | Our Crafty Mom Vintage Gumball Machine Ornaments | Beth Watson Design Studio Etched Glass Ornaments | Just Call Me Homegirl Unicorn Inspired Christmas Tree | The DIY Mommy Driftwood Reindeer Ornaments | Sustain My Craft Habit

DIY Christmas Gifts and Decor

Christmas Pine Hoop Wreath | This Mama’s Dance Gingerbread Man Candles | Nourish and Nestle Wire and Glass Chandelier | Home with Cupcakes and Crinoline Christmas Scroll Wall Art | Grace In My Space Lighted Wood Trees | Frazzled Joy Crocheted Christmas Hat | Luz Patterns Christmas Card Photo Display| Hertoolbelt JOY Porch Sign | Ginger Snap Crafts Folding Bar Cart Table | Everyday Party Magazine Wood and Burlap Christmas Sign | Leap of Faith Crafting Wood Block Snowman | Anika’s DIY Life Holiday Candle Wrap | Dragonfly & Lily Pads Christmas Pom Pom Pillow | Small Home Soul Handlettered Wall Art | Smiling Colors

Those of us who did videos for this hop can be found in the playlist below, so those of you who would rather watch than read (or just want to blow off work for a few more minutes) have something, too! *If you’re having difficulty playing it, you can jump over to the playlist here.*

There you have it! Hope you’re getting into the holiday spirit just in time. Will you be working on any decor ideas this Christmas? This is going to be a very busy holiday season for me, so be sure to check back in for more DIYs (I’m going to give that epoxy inlay idea a shot, and a few more scrap ideas are just bubbling in the ol’ brain). Have a great weekend!

You'll Also Love

25 Great Gift Ideas for the Craft Beer Lover

DIY Wooden Couch Sleeve

It’s Pronounced “Damn Good Cookie̶...

Lots of Sneak Peeks: Riding the Buildathon Wave

.yuzo_related_post img{width:170px !important; height:170px !important;} .yuzo_related_post .relatedthumb{line-height:14px;background:#ffffff !important;color:#454747!important;} .yuzo_related_post .relatedthumb:hover{background:#ffffff !important; -webkit-transition: background 0.2s linear; -moz-transition: background 0.2s linear; -o-transition: background 0.2s linear; transition: background 0.2s linear;;color:#454747!important;} .yuzo_related_post .relatedthumb a{color:#102a3b!important;} .yuzo_related_post .relatedthumb a:hover{ color:#113f5e}!important;} .yuzo_related_post .relatedthumb:hover a{ color:#113f5e!important;} .yuzo_related_post .relatedthumb:hover .yuzo__text--title{ color:#113f5e!important;} .yuzo_related_post .yuzo_text, .yuzo_related_post .yuzo_views_post {color:#454747!important;} .yuzo_related_post .relatedthumb:hover .yuzo_text, .yuzo_related_post:hover .yuzo_views_post {color:#454747!important;} .yuzo_related_post .relatedthumb{ margin: 0px 6px 0px 6px; padding: 0px 0px 0px 0px; } jQuery(document).ready(function( $ ){ jQuery('.yuzo_related_post .yuzo_wraps').equalizer({ columns : '> div' }); });

The post Wood Inlay Ornament with German Glass Glitter appeared first on The Ugly Duckling House.

Website // Subscribe // Advertise // Twitter // Facebook // Google+

Wood Inlay Ornament with German Glass Glitter published first on http://ift.tt/2qxZz2j

[endlessarchite]

Wood Inlay Ornament with German Glass Glitter

Hi friends! And hi to new friends visiting from the #CreativeChristmas Challenge hosted by Remodelaholic!

To those of you who don’t know me yet: welcome. Everyone else has already started drinking and saying really embarrassing things (about themselves, not you… we’re not a super judgmental bunch). To those of you who already know me: cheers. As always, you rock. And I was just kidding about the drinking thing (unless it’s football season and a Saturday, which yes to both).

Anyway, from time to time, I like to throw my hat in on a DIY challenge or two because nothing excuses buying more power tools like overcommitting to a deadline for fun (like the 2×4 summer challenge and boom: new coffee table!). This time around, the theme was making something for Christmas. I’ve already been finding inspiration for my color scheme this year in the form of acorns, snowflakes, owls, and other wintery-woodland things, so I figured: why not see if I can fill up the inevitable empty parts of my tree with what I have on hand, rather than buying a bunch of new ornaments? I also just happened upon a set of carving bits for my Dremel and have been itching to experiment with epoxy/inlays/resins, so I started playing around until this happened:

And as a fun little bonus: I actually made a video of it too!

Tools and Materials

affiliate links of items I recommend and use are listed in this post, which support this site at no cost to you… thanks!

scrap wood (I had 1″ x 4″ poplar)

scissors

printer paper

inkjet printer

acetone or nail polish remover

Dremel 200

Dremel engraving/carving kit

band saw or scroll saw

random orbit sander

wood stain (I used Minwax Ipswich Pine and washed while it was still wet with Early American… I’ll have to show you guys more about this as I’ve done it a number of times to get the colors I like)

Mod Podge

small detail paint brush

Miss Mustard Seed’s German Glass Glitter in Silver Tiara

Martha Stewart Crafts extra fine glitter in Smoky Quartz

clear spray sealer (gloss)

small drill bit

thread (I used stuff from my cross stitch stash)

First things first: print out the image (mine is available for download near the end of the post) and cut it out. I used a scrap piece of poplar that was bound for the burn pile, so I wasn’t really expecting perfection (in fact as you can see, I first used a different image that was WAY too intricate for a first-time experiment and then decided on the final design).

To transfer the ink from the printer paper, I swabbed the back with an acetone nail polish remover. As you can see, the image didn’t transfer perfectly, but it was good enough (I got the idea from my buddy Brad’s video here — then went with the option that wouldn’t require changing out of my pajama pants or going into the cold garage that morning).

Next, I took out my Dremel and a new engraving/carving set I’d recently purchased for another inlay project. In my opinion, crafting is a good intro before graduating to larger pieces, so I figured this would help me practice with diamond tips, how to control the carve, etc. A good method is to create the hard outline first, then carve out the middle, and continue to make the inlay deeper and deeper until it’s got enough depth to hold the inlay material (glitter, epoxy I assume, whatever).

Next, I sketched out the overall shape (spoiler: it wasn’t at all even, so I highly recommend using the template) and then went to cut out the piece. And this is when it seemed like things were conspiring against me: my new scroll saw was broken… right out of the box. Womp, womp.

To make the situation a little stickier, I was about 5 hours away at this point from needing to head out of town to Raleigh, NC (recap here), and I had no other tools that would give me the right depth and shape. Disappointed but undeterred, I figured the next best thing would be to ask to borrow tools from the person I’d be visiting (thankfully, it was a trip to visit some DIY blogging friends just for fun — my pal Brittany just so happened to have a band saw in her garage). Of course, now I want one of those, too.

Of course, I’d never actually used a band saw before, so despite the general don’t-cut-your-fingers-off rule, the piece still came out a little wonky (mostly due to my non-templating sketch). I was able to shape it a little more with an orbital sander. I also carved the edges out a little more and did a final sanding with high grit sandpaper before stain.

Since the overall concept was to make this look like an inlay, I wanted to use glitter with a little more grit and sparkle: enter, German glass glitter. It’s really amazing stuff in person. To paint it into place, I relied on a small paint brush (tip: if the brush starts to fray a little, spin it as you’re dipping it into the glue to get the point fine again… check out my video to see a demo of that).

You can layer the glitter in, too: after giving it some time to dry, paint another bit of glue on top of the glitter and add more into the recessed areas. It will add depth!

I added extra-fine gold glitter around the edge and sealed the whole thing with a clear gloss spray, then drilled a hole through the top and threaded it so it could hang on the tree.

Caveat: before I sealed with a clear gloss, I actually tried to seal with an old polycrylic which unfortunately made the top and bottom tips look faded/cloudy once it dried. At first I thought I’d lean into the mistake by painting the back and sides with chalk paint and sanding to make it look rustic, but it looked really sad instead and totally detracted from the sparkle on the front. I wanted to get this done in time for the blog hop, so I just continued on with sealing again and adding the glitter around the edge. So, if you try a project like this, don’t make my mistake and you’ll get even better results!

You can also try other inlay methods, other glitter colors, fill in the center vs the outer rings with opposite hues, etc… the possibilities are pretty endless!

All in all, I think it’s going to make a nice addition to my white/gold/chrome/woodland Christmas decor theme this year (and the less I need to spend on ornaments, the more budget I have to make Christmas cocktails, hehe).

Want to try this for yourself? You can download my template here.

To be perfectly frank, I think the photos really don’t do the sparkle on this piece enough justice (in fact, I worried that it was looking too drab in photos). So, I made a video tutorial too (I’d love it if you subscribed if you haven’t already… with what I’ve learned in making this tutorial, there is more to come no doubt!).

As I mentioned, this DIY was part of a blog hop, with 25 other bloggers participating — aka, enough DIY Christmas ideas to keep you busy right up until the actual holiday (if you were so ambitiously inclined). So, check out a preview of the other projects and bloggers participating in the images below. You can also head over to the Remodelaholic post (who is hosting this hop) to check out other DIYers submitting their inspired ideas (on social media, you can look for #CreativeChristmas to find them all).

DIY Christmas Trees and Ornaments

Wintry Silver Dollar Store Christmas Tree Decor | Remodelaholic Marbled Christmas Ornaments | Doodlecraft Scrap Wood Inlay Ornaments | The Ugly Duckling House (you’re here!) Woodburned Wood Slice Ornaments | Sisters What Flocked Pine Cones | Practical and Pretty Abstract Monogram Ornaments | Domicile37 Concrete Christmas Ornaments | The Palette Muse Wood Slice Deer Ornaments | Our Crafty Mom Vintage Gumball Machine Ornaments | Beth Watson Design Studio Etched Glass Ornaments | Just Call Me Homegirl Unicorn Inspired Christmas Tree | The DIY Mommy Driftwood Reindeer Ornaments | Sustain My Craft Habit

DIY Christmas Gifts and Decor

Christmas Pine Hoop Wreath | This Mama’s Dance Gingerbread Man Candles | Nourish and Nestle Wire and Glass Chandelier | Home with Cupcakes and Crinoline Christmas Scroll Wall Art | Grace In My Space Lighted Wood Trees | Frazzled Joy Crocheted Christmas Hat | Luz Patterns Christmas Card Photo Display| Hertoolbelt JOY Porch Sign | Ginger Snap Crafts Folding Bar Cart Table | Everyday Party Magazine Wood and Burlap Christmas Sign | Leap of Faith Crafting Wood Block Snowman | Anika’s DIY Life Holiday Candle Wrap | Dragonfly & Lily Pads Christmas Pom Pom Pillow | Small Home Soul Handlettered Wall Art | Smiling Colors

Those of us who did videos for this hop can be found in the playlist below, so those of you who would rather watch than read (or just want to blow off work for a few more minutes) have something, too! *If you’re having difficulty playing it, you can jump over to the playlist here.*

There you have it! Hope you’re getting into the holiday spirit just in time. Will you be working on any decor ideas this Christmas? This is going to be a very busy holiday season for me, so be sure to check back in for more DIYs (I’m going to give that epoxy inlay idea a shot, and a few more scrap ideas are just bubbling in the ol’ brain). Have a great weekend!

You'll Also Love

25 Great Gift Ideas for the Craft Beer Lover

DIY Wooden Couch Sleeve

It’s Pronounced “Damn Good Cookie̶...

Lots of Sneak Peeks: Riding the Buildathon Wave

.yuzo_related_post img{width:170px !important; height:170px !important;} .yuzo_related_post .relatedthumb{line-height:14px;background:#ffffff !important;color:#454747!important;} .yuzo_related_post .relatedthumb:hover{background:#ffffff !important; -webkit-transition: background 0.2s linear; -moz-transition: background 0.2s linear; -o-transition: background 0.2s linear; transition: background 0.2s linear;;color:#454747!important;} .yuzo_related_post .relatedthumb a{color:#102a3b!important;} .yuzo_related_post .relatedthumb a:hover{ color:#113f5e}!important;} .yuzo_related_post .relatedthumb:hover a{ color:#113f5e!important;} .yuzo_related_post .relatedthumb:hover .yuzo__text--title{ color:#113f5e!important;} .yuzo_related_post .yuzo_text, .yuzo_related_post .yuzo_views_post {color:#454747!important;} .yuzo_related_post .relatedthumb:hover .yuzo_text, .yuzo_related_post:hover .yuzo_views_post {color:#454747!important;} .yuzo_related_post .relatedthumb{ margin: 0px 6px 0px 6px; padding: 0px 0px 0px 0px; } jQuery(document).ready(function( $ ){ jQuery('.yuzo_related_post .yuzo_wraps').equalizer({ columns : '> div' }); });

The post Wood Inlay Ornament with German Glass Glitter appeared first on The Ugly Duckling House.

Website // Subscribe // Advertise // Twitter // Facebook // Google+

Wood Inlay Ornament with German Glass Glitter published first on http://ift.tt/2qxZz2j