#Tp-Link Re200 Troubleshooting

[tp-linkrepeater]

Configure TP-Link RE200 extender. The TP–Link RE200 Range Extender helps to boosts Wi-Fi signal to dead zones or hard-to-wire areas seamlessly. RE200 also compatible with 802.11b/g/n and 802.11ac Wi-Fi devices and it has a dual band speed for 2.4GHz and 5GHz up to 750Mbps. The design of the RE200 extender is easy to plug in installation and the small size make it flexible to relocate easily. The Ethernet ports allow the RE200 to work as wireless adapter to connect wireless devices.

TP-Link RE200 range extender:

Firstly you need to log in using its default IP: 192.168.0.254 to Web GUI of RE200 or via domain name: TP-Linkextender.net or TP-Linkrepeater.net.

Here follow Quick Setup and then click to “Next”.

Now you need to select your Region and then click to “Next”.

[angelsharmaposts]

Hardware Specifications of TP-Link RE200 AC750 Wi-Fi Range Extender

If you are the one facing the connectivity issues, the primary reason can be the range issue that is causing due to the single router. No matter how premium a router you invest in, it will never be able to provide enough coverage to cover your whole house. TP link extender troubleshooting

 You will need to install the extender that will help you extend the signals to the areas where you weren’t able to use the internet yet. The tplinkrepeater setup is very intuitive and user-friendly. All the features and options are available under a single dashboard.

 On a high-speed internet connection, you will not need to face the connection drop and to overcome the issue, you will need to choose the right device so that there is no drop in the connectivity or bandwidth loss.

Hardware specs of TP-Link RE200

Before you finalize the decision to buy this range extender, you will need to know the right hardware specs. These specs will help you in getting exactly what you want. Here are a few specs that we are mentioning in the following bullets.

 1.     There will be an RJ45 port where you will be able to connect the wired devices.

2.     The internal antenna setup will provide you enough coverage and it will eliminate all the connection drop issues.

3.     On the front, you will get a WPS button that will allow you to establish a connection without entering any SSID/password.

4.     You will also get the Reset button that you will need to press for 10 seconds to get the extender back to its factory settings.

5.     You will need to log in to the tplinkrepeater portal to find all the features that are directly linked to your network’s security. The extender will work on dual bands.