#Unit2

[030615]

Unit 2 Reflective Journal - Lim Lin Year 1 Production Arts for Screen

For the next unit, we are introduced to designing and making. For the next five weeks, I will be recording my progress and reflections for both the 2D and 3D components of this project. 

During the first lesson of the 2d component of this unit, we were taught how to convey storytelling in a scene, in which the setting allows the audience to know the story. Several factors such as the angle, atmosphere and shape language create a scene in which the character, personality and time can be shown. An important part to take note of is to ensure that the viewer knows what the drawing is about, and to do so we should plan the artwork with a story in mind and use different design elements to create context and meet the audience's expectations through the medium. For the practice we had this lesson, we had to redraw a child’s bedroom into one of a spiteful 90-year-old. 

I decided to change the bed frame to a hard metal frame, replaced the small tv with a larger one, removed the posters while leaving marks of it that were stuck to the wall, and added a few old storage boxes to imply that the elderly person has grown out of their past hobbies. I also tried to show the age of the elderly person with several other changes such as changing the furniture to more antique ones and adding props like the floor fan. 

The next tutorial for 2d drawing taught us how to create appealing and leading compositions. A point heavily emphasized was that the environment provides a stage for the action. The practice given tasked us with doing a room drawing with all the props given, while making the fishbowl the focus of the composition. 

Although it was not obvious in the rough sketches I made, the different props ended up appearing very cramped in the final drawing, so the fishbowl did not appear as the focus of the shot. I would have to consider when working on the final hand in's line drawing component. 

The third tutorial was for the drawing practice which involves outdoor compositions. For environments consisting of organic forms, finding the horizon line is important when drawing them and take note that the large land masses are still on the ground. For this practice, we had to draw an image of a forest given in another camera angle. 

For this drawing, I started with the closer trees as a frame then struggled when working on details such as the grass and weeds. I should have controlled the number of details in different areas of the shot to lead to eyes to the centre of the image. 

Lastly, to make the settings appear more charming to the audience, our tutor explained ways to make the backgrounds look more captivating rather than informational. To do so, the advice given is to have solid perspective drawing and to research on details, as well as to vary line weight to create a sense of depth. I realised after this tutorial that many of my previous perspective drawings have this issue as the ones with many geometric forms appear too mechanical. As such, I tried following the guidelines given when working on the line drawing, then cleaned it digitally for the final hand in. 

The second part of this unit was the 3d component and it began with an introduction to blender. For the next 3d tutorials throughout the unit, we were guided on how to model a realistic eyeball which will then be used for the final 3d render. I tried using blender a few times in the past but struggled a lot because I was not sure how the different tools work. These tutorials helped to familiarise me with several functions that are used often in modelling, such as proportional editing and extrusion. The types of texture maps used were explained clearly and this later helped me a lot when creating my own materials. 

For the “Eyeball Soup” project, I wanted to create a scene which depicts a cannibalistic family having a hotpot dinner. The inspiration of this came from various horror games which have this storyline as a reason for body parts to be found in meals. I also wanted to play with the cultural aspect of this project as I find the many ways to incorporate this grotesque subject matter into Chinese superstitions to be interesting to research on. 

The first items I modelled besides the eyeball are simple items such as bowls, plates, and trays, then working on more complex objects like the hotpot. While they are all made of similar shapes, I struggled a lot with modelling the bottom half of the hotpot as I was still not familiar with using the extrusion and other editing tools. I had to redo the modelling several times before ending up with this result. 

The handle was also challenging to model. The use of the mirror and subdivision surface modifiers made it difficult to bevel the edges of the handle. I decided to try working on other parts first, so I started looking up fluid simulation tutorials for the soup broth. I wanted to use a fluid simulation for this as I wanted the soup to appear as if it was boiling. 

On a separate blender files, I began to model the mahjong table and food items that I want to include in the scene. 

For tubular forms such as the organs and noodles, I used the Beizer curve tool to make the process more efficient. While the noodles were made without textures, I struggled to map out the texture for the organs. I ended up using the “Project from view” function to make the texture appear less out of place. 

For more complicated organic forms such as lettuce leaves, I followed a tutorial to learn how to create believable folds using sculpt mode. By adjusting the radius and origin offset of the boundary forms, I was able to create a shape that resembles the references I used. 

UV mapping was more challenging as I had to fit the mesh into the image texture. 

After a while, I was able to familiarise myself with modelling objects and adding textures. The key issues I had were still the accuracy of the models and the quality of the textures I used. Although the image quality was not obvious in this project, I would have to consider this in the future when modelling items that require close-up shots. 

I also wanted to add a rice bowl with chopsticks sticking into it as this act is seen as a major taboo across Asian countries, since it resembles incense used in funerals and offerings. To create the rice, I followed a rice modelling tutorial and adjusted the amount of rice on the sphere. 

A tedious step I had to do was to split the fluid domain in half. I ended up needing to redo the fluid simulation twice on two separate “bowls” in the hotpot. While it was very time consuming, I was still thankfully able to finish it in time and converted the domains to mesh for the material setup. I also added a few planes with newspaper as textures as it is common to use newspapers to prevent broth from spilling onto the table. 

For extra detail, I also added text into the switch panel and added small spheres which emit red light. 

The handle was also fixed with more precise use of the bevel tool. 

After a while, I was finally able to finish modelling all the objects and adding textures onto them, then appended them together into one blender file. 

Afterwards, I modelled parts of the room that are visible in the shot and added lighting to the scene. I used a tile pattern for the floor and added a “window” which emits light. The altar was an image UV mapped into a cuboid as I had no time to model the entire thing but added some lights and roughness map to make it look more believable. 

The last step was to set up the HDRI and adjust the rendering settings for the final render. The alternative angles and close-up shots I chose for the final submission are in the file uploaded to Moodle. 

Overall, I was satisfied with the result as I managed to work outside of my comfort zone for this unit. I would like to use what I learned in the 2d component to have a stronger foundation in perspective drawing and hope to learn more about blender and 3d modelling for future projects. 

[aldirassakw]

مذكرة إنجليزي Unit2 للصف الرابع اعداد خالد سلمان

مذكرة إنجليزي Unit2 للصف الرابع اعداد خالد سلمان إضغط هنا لتحميل الملف aldirassa.com الصف الصف الرابع انجليزي الصف الرابع انجليزي | الفصل الاول | الصف الرابع 770 KB 115 2020-09-25, 20:32 مساء الصف الرابع الصف الرابع, انجليزي | الفصل الاول | الصف الرابع, انجليزي الصف الرابع, مذكرة إنجليزي Unit2 للصف الرابع اعداد خالد سلمان

[imitationgame77]

SecUnits in ASR and Their Fate

It’s been bugging me (well not so much) just how many SecUnits appeared in All System Red, and what happened to them. So, I decided to go through the book, making notes (as we do, of course).

My conclusion was this:

One unit (Murderbot) assigned to the PreservationAux team

Three units assigned to the DeltFall survey team. One survives.

Four units (probably) assigned to the GrayCris team. Three survive.

Premise:

There is a rule set by the bond company that any team must have one rental SecUnit per ten humans.

Murderbot and Pin-Lee had checked DeltFall specs that stated that they had three SecUnits.

The presence of GrayCris on the planet was hidden from both PreservationAux and DeltFall, so, they had no knowledge of the team’s size.

What happens to the units

[Chapter Four]

At the door to the hub, I found their first SecUnit. It was sprawled on its back on the floor, the armor over its chest pierced by something that made a hole approximately ten centimeters wide and a little deeper. We’re hard to kill, but that’ll do it.

DeltFall Unit1 – killed with a mining drill

I hit the first one with three explosive bolts in the back and one in the faceplate as it turned toward me. It dropped. The other one I nicked in the arm, taking out the joint, and it made the mistake of switching its main weapon to its other hand, which gave me a couple of seconds. I switched to rapid fire to keep it off balance, then back to the explosive bolt. That dropped it.

Neither unit was dead. But they were incapable of reaching their cubicles in the ready room, and I sure as hell wasn’t going to give them a hand.

DeltFall Unit 1 & 2 – incapacitated but not dead

One or both of these units could have been the ones belonging to GrayCris, but since MB would notice and mention that if they were wearing a different armour, my assumption is that these were DeltFall Units.

When Murderbot thinks that it has taken down remaining DeltFall SecUnits, it was attacked by another one. MB comes back online, terrified and angry to find its armour partially removed.

I shoved its hand up under its chin and took the pressure off its weapon. It had a split second to try to abort that fire command and it failed. The energy burst went through my hand and the join between its helmet and neck piece. Its head jerked and its body started to spasm. I let go of it long enough to kneel up, get my intact arm around its neck, and twist.

I let go as I felt the connections, mechanical and organic, snap.

GrayCris Unit 1 – taken down but probably not dead. (Will come back to this later.)

That was the fourth one that Murderbot saw in the DeltFall habitat where it had expected three. Yet it was not over.

I looked up and another SecUnit was in the doorway, lifting a large projectile weapon.

How many of these damn things were here? It didn’t matter, because I tried to shove myself upright but I couldn’t react fast enough. Then it jerked, dropped the weapon, and fell forward. I saw two things: the ten-centimeter hole in its back and Mensah standing behind it, holding something that looked a lot like the sonic mining drill from our hopper.

GrayCris Unit2 – killed with a mining drill.

Murderbot had said earlier that SecUnits are hard to kill but piecing their heart with something like a mining drill, leaving a hole the chest would do it. That’s what Dr. Mensah did to this unit in order to save Murderbot.

[Chapter Six]

After PreservationAux have evacuated from their habitat, they return discreetly to see who the EvilSurvey was.

Five SecUnits piled out of the cargo pods, all armed with the big projectile weapons assigned to protect survey teams on planets with hazardous fauna, like this one. From the pattern on the armor chestplates, two were the surviving DeltFall units. They must have been put into their cubicles after we escaped the DeltFall habitat.

So, here we see 2 surviving DeltFall Units and 3 GrayCris Units, which did not include GrayCris Unit2.

[Chapter Seven]

By the size of their habitat and the number of SecUnits, including the one Mensah had taken out with a mining drill, they had between thirty and forty team members.

Since there is a rule of one unit per ten humans, the estimates of 30-40 team members suggest MB had observed four SecUnits belonging to GrayCris. Here, it is also confirming that one (GrayCris Unit2) was killed with a mining drill earlier, but no mention of the other one, suggesting that it (GrayCris Unit1) survived.

In the open area on the plateau were seven figures, four SecUnits and three humans in the color-coded enviro suits, blue, green, and yellow. It meant they had one SecUnit and probably twenty seven–plus humans back at their habitat, if they had followed the rule of one rental SecUnit per ten humans.

So, here, there are five SecUnits, four that MB could see and one it assumes to be with the remaining GrayCris humans.

She cut the comm off again. Then one of the DeltFall SecUnits started forward. She came back on to say, “This Unit will help you.”

This indicates that surviving DeltFall Unis were there, visible. So, there were 2 DeltFall Units, and 3 GrayCris Units (Unit1 from earlier, Unit2 and Unit3) in this scene, and one of the GrayCris Units was out of sight with the remaining GrayCris people.

We rolled over rock and brush until I wrenched its weapon away. After that it was easy to finish it off. Physically easy.

I know I said SecUnits aren’t sentimental about each other, but I wished it wasn’t one of the DeltFall units. It was in there somewhere, trapped in its own head, maybe aware, maybe not. Not that it matters. None of us had a choice.

DeltFall Unit 2 or 3 is now dead.

It is worth noting that it seemed as though MB would rather have killed one of the GrayCris units. It had more sympathy for units forcefully taken over by combat override modules than those controlled by HubSystem via a governor module. This may be because with the HubSystem control, there is still some level of autonomy, whereas combat override modules “turn a unit from a mostly autonomous construct into a gun puppet”.

GrayCris takes Mensah aboard their hopper as hostage, while MB pretends to be the dead DeltFall Unit and rides in the cargo with the other three units (1 DeltFall and 2 GrayCris). They land a few kilometres away from the GrayCris habitat, close to the beacon.

The two SecUnits were circling the beacon’s tripod, looking for signs of tampering, and I couldn’t take it anymore. I started to walk toward Mensah.

When the remaining DeltFall SecUnit whipped toward me and opened fire, I knew the light had dawned. I dove and rolled, coming up with my projectile weapon. I was taking hits all over my armor but scoring hits on the other SecUnit.

After this, the beacon is launched, causing massive explosion which knocks MB offline for a while. There were no further mention of the remaining SecUnits there. So, as far as we know, one of the DeltFall units survived, and 3 out of 4 GrayCris units also survived.

Additional units

[Chapter Eight]

I expected a suit skin and armor, but the station units that helped us out of processing when we had catastrophic injuries gave me the gray PreservationAux survey uniform instead. I put it on, feeling weird, while the station units stood around and watched me. We’re not buddies or anything, but usually they pass along the news, what happened while you were offline, what the upcoming contracts were. I wondered if they felt as weird as I did.

Here, we have a glimpse of other units that Murderbot seemed familiar with. They were familiar only in the sense that their presence was no surprise to it but no familiar enough to have much interaction.

On re-reading All Systems Red, I noticed that while Murderbot did not show protective attitude towards its fellow SecUnits, and generally mistrusted them, it was unwilling to kill them. It expressed willingness to kill them while it had assumed that the DeltFall units had gone rogue and killed their clients, once it realises that they had lost autonomy to combat override modules it seemed more reluctant to kill them. It showed less sympathy towards GrayCris units which were ordered to carry out evil deeds by their humans, suggesting that it had expected them to exercise some control over their actions even if that meant they were punished by their governor modules.

[frequently-studies]

25/9/23

day 1 of my 100 days of productivity challenge!

Woke up at 5, studied a bit, then went to college, attended classes, stayed back in the computer centre for a while to catch up on work and then came back home. Didn’t really study anything after coming back home though, but a good start I’d say. Did an entire 9-5 in college today.

Completed Data Link layer in DCCN Unit2. Looking to do parts of the Network Layer tomorrow and day after and be hopefully done with DCCN. Have a digital communication class as well tomorrow that I cannot skip.

Completed 5000 steps today and also stood up 12/12 hrs. I could not complete my exercise ring today, will try again tomorrow.

Tried making a new friend today! Did not work out as well as I hoped but it was certainly progress 🫶🏻

Today’s jam - Infurnami by Steve Lacy!

[ourlittlechocopie]

kerja klo udah demotivasi tu ..... disemangatin kya apa jg susah ya:") smg demotivasinya ga jd bebaan buat unit2 lain:') wkwkwk

[mywordsolutionedu-blog]

Need help with your Unit 2 Construction Technology assignment? we can assist with understanding concepts, outlining your work, or finding resources. https://bit.ly/3E4kmVR Let us know the specific topics or questions you're working on! https://miracleskills.com/uk/assignment/construction-substructure-and-superstructure-7871.html

Unit2 #ConstructionTech #AssignmentHelp #Engineering #BuildingTechnology #HND #Construction #theBuiltEnvironment

[myschool77site]

كتاب الامتحان علوم متكاملة اختبار شامل على الفصل الثانى بالإجابات للصف الأول الثانوي الترم الثاني 2025

https://www.myschool77.com/2025/02/Exam-unit2-kitab-alaimtihan-eulum-mutakamila-Sec1-2term.html

[helpwithperdisco]

Get the best Construction Technology Assignment Help!! Hire native writers for University Assessment Solutions!! Order Now on WhatsApp: +44 141 628 6080!!

#Unit2 #ConstructionTechnology #AssignmentHelp #Solution #AssessmentHelp #HNC #HND #BTEC #UKtopwritingservice #top10writingservice #Construction #theBuiltEnvironment #OnlineTutor #AskTutor #AssessmentWritingService #UK #BedfordAssignmentHelp 

[indahastari]

Tahun 2024 ini panas banget buat sekelompok orang. Ga cuma orang2 yang maju jadi presiden atau wakil rakyat. Di tempat kerjaku juga gitu. Mulai dari pimpinan tertinggi sampe ke unit2 kerja dibawahnya.

Setiap hari yang dibahas; si itu kira2 menang ga ya? Pendukungnya banyak ga ya? Kuat ga ya?

Setelah terpilih, orang2 dibawah pun mulai bereaksi, macam2. Ada yang seneng karena orang terdekatnya jadi pimpinan tertinggi, ada yang ketar ketir takut dimutasi lantaran pejabat baru ini dirasa ga sefrekuensi dengannya.

Lucu deh liat proses pemilihan hingga reaksi orang sekitar. Segitunya ya dengan jabatan ini. Ada yang berharap klo pemimpin yang baru bisa bikin dia dipromosi utk dapat jabatan lebih tinggi dari yang sekarang. Ada yang mulai merapat, bermanis ria, mencari muka yang ntah dimana dia simpan kemaren. Ada juga yang bermain "aman" dengan tidak banyak bicara dan berkelompok, dengan harapan setidaknya tidak dipindah ke posisi yang (menurut mereka) kurang nyaman.

Muara dari semua ini adalah uang dan kekuasaan. Tapi pernah ga sih orang2 ini mikir, klo menjadi pejabat itu tanggung jawabnya besar, bukan cuma di dunia, tp sampe ke akhirat. Beban kerjaan juga banyak. Kalo yang aku liat selama ini sih, ga penting jabatan itu sesuai dgn bidangnya atau ga, bisa ga bekerja sambil belajar hal baru di usia yang sudah tidak muda lagi? Sepertinya mereka lupa bertanya ke diri mereka masing2 tentang hal ini. Mereka hanya fokus pada capaian tunjangan yang besar dan fasilitas lainnya.

Susah banget kayanya kultur ini diubah, yang awalnya idealis bisa melenceng jauh dr prinsip awalnya, karena uang dan kekuasaan.

#tulisanindah

[crydayz]

240229 STRETCH

「貴様の存在など私の気持ち一つで簡単に潰せるのだぞ？」

という圧がけに対し

「すみません！ あなたに盾突きたいとかそのような意図は一切ないんですが、多分それ無理です、やめた方がいいと思います！」

的な返しをして実際後者がめちゃくちゃ強い的な展開はエンタメ作品内でのチート能力演出として鉄板なわけだが、現実でそんな「事なかれ主義者のくせして人類最強」みたいな人間いるわけがない（UNIT2へ続く）

---

◆UNIT1

ここで「それはあくまであなたの脳内における認識であって現実がそうとは限らないでしょう？」的な返しをしてくる人間もがいるわけだが、それに関してもいちいち律儀に答える必要はない

何故ならばこの私という存在は滅茶苦茶「ちっぽけ」であり、そんなちっぽけな人間にいちいち突っかかってくる人間も押し並べてちっぽけだからである

僕は僕自身の無力さに絶大なる信頼を置いている

だが、この認知（自分には社会的影響力が乏しいという思い込み）こそが最も酷い差別や断絶を生み出す土壌である事も理解している

理解しつつも「面倒くさい」という理由で自分の強さ / 加害性を見て見ぬふりする自分を「それなりの悪だな」と思う程度のモラルはある

---

◆UNIT1.5

▲UNIT1は僕の脳内の汎用内省テンプレであって最初に提示した主張とは何の関係性もないただの「批判への予防線」である

主張と自己弁護はこのようなアセットの組み合わせによって成立しており、その運用に「真の理性や感情」つまり「本音」が関与してくる事はほとんどない

つまりこのような厄介ボールは手続きによっていくらでも量産できるわけで、これにぶら下がる会話も代わりの効く駄菓子めいたコミュニケーション・・動物的な「鳴き声」に過ぎない

ああ、またサボる為の無意味思考ガムを噛み始めてしまった。だがこのガムを噛んでしまったという後悔をシェアする事には何らかの価値があるはずだ。僕には意義や意味を見つけられなくとも、これを読んだ誰かが必ず何らかの意味性を見出してくれると信じている

少なくとも何らかの「味」を感じてくれると信じている

駄文に込める祈りはそれで十分

【UNIT2はない】

[unit2bloglivfashion]

UNIT2 SKETCH BOOK

this is the whole of my unit 2 work

[111122247]

Unit2:Black&white

main project photo:

Statement of intent:

The model in this photo is my classmate, and the emotion expressed is very happy and excited, and the use of a metering light can more highlight the emotion

[millimeter0200]

Studying CMSC 11 UNIT 2 on Quizlet: https://quizlet.com/836048278/cmsc-11-unit-2-flash-cards/?x=1jqU&i=3rhl15

#CMSC #UNIT2 #COMPUTERSCIENCE

[thecazagroup]

BrandNew #CONDO #OPENHOUSE

8/13 Sun 1-3PM 🏠 in #Washington DC 20002 1262 Holbrook Ter NE Unit2 1268 Holbrook Ter NE Unit1 3-4🛏🛏 2.5-4🛁🛁 $674,900-$749,900

Welcome home to the Trinidad neighborhood's newest condo community! Holbrook Terrace NE features 10 brand new condo units ranging between 1198-2146 SQ FT with thoughtful design, maximized floor plan, and rooftop views! Each unit features stainless steel appliances, unique custom finishes, and in-unit washer/dryers. The large windows and open space add a unique element to the space. There is parking available, and some units will convey with private rooftop space. Located in upcoming Trinidad, this home is close to Union Market, NOMA, Gallaudet University, H Street Corridor and more!

☎️ 703.337.3699 #TheCAZAGroup creates #RavingFans by helping our community make smarter #HomeBuying and #HomeSelling decisions with less hassle and better service. We're serious about helping you make excellent and informed decisions. #SatisfactionGuarantee #RealEstate Click here for details https://www.thecazagroup.com/

[helpwithperdisco]

Enjoy Personalized Online Unit 2 Scientific and Mathematical Applications for Construction Assignment Help and Solution Services At The Most Affordable Price!! Order Instant Solution on WhatsApp: +44 141 628 6080!!

#Unit2 #Scientific #MathematicalApplications #Construction #AssignmentHelp #Solution #Level1 #Level2 #Diploma #Construction #theBuiltEnvironment #LeicesterAssignmentHelp #HND #BTEC #AssessmentHelp #OnlineTutor #AskTutor #topassignmenthelpservices #UKtopwritingservice #UK

[blogspud-jobs]

Apply Now Audit & Compliance Incharge (Social and Environmental Audits) : https://www.blogspud.com/job/best-corp-tamil-nadu-tirupur-palladam-road-full-time-audit-compliance-incharge-social-and-environmental-audits/?feed_id=28027&_unique_id=64c927d33c3ec Job Opportunity: Audit & Compliance Incharge (Social and Environmental Audits) We are currently seeking a skilled and experienced individual to join our team as an Audit & Compliance Incharge. If you have a strong background in conducting social and environmental audits and are committed to upholding compliance standards, we would love to hear from you. Job Title: Audit & Compliance Incharge (Social and Environmental Audits) Job Requirements: - Age: Below 45 years - Experience: 3 to 5 years in conducting social and environmental audits - Location: Thennampalayam Palladam Road, Tirupur Qualifications: - 3 to 5 years of experience in conducting social and environmental audits. - In-depth knowledge of social compliance standards and environmental regulations. - Excellent analytical and problem-solving skills. - Strong communication and interpersonal abilities to work effectively with diverse teams. - Detail-oriented and capable of managing multiple audits simultaneously. - Proficiency in relevant audit software and tools. How to Apply: If you possess the necessary experience and expertise in social and environmental audits, and are interested in the Audit & Compliance Incharge position, please contact us at: Contact No: 8754824410 Email: unit2-recruitment@bestcorp.in