#ZUI 2.5 | Explore Tumblr posts and blogs

dmbjexchange · 2 years ago

Text

Rarepair Exchange Signups Open

It’s time for the Daomu Biji Rarepair Exchange, a fic, art and vid exchange for DMBJ ships where more than 3% of English-language authors have posted fics on AO3.

In this exchange, participants will be anonymously matched to create gifts for one another during a six week creating period.

This exchange is open to all the DMBJ canons - if it’s DMBJ, then it’s eligible! It will take place on AO3, so you need an AO3 account to participate – if you don’t have one, you can request an invitation code here. If there isn’t enough time, no worries - contact the mods at here on tumblr or on Discord and we can send you an invitation!

Please read this post carefully before signing up.

Schedule

September 4: Signups open September 11: Signups close September 18: Assignments out November 30: Assignments due December 10: Fic reveals December 17: Creator reveals & treats deadline

Allowed Ships

Any DMBJ ship which has had less than 3% of English-language authors post fics for it on AO3.

For this year's exchange, this means the following ships are NOT allowed:

Er Yue Hong/Zhang Qishan

Hei Xiazi/Xie Yuchen

Hei Xiazi/Huo Xiuxiu/Xie Yuchen

Kan Jian/Liu Sang

Liang Wan/Zhang Rishan

Liu Sang/Wang Pangzi

Liu Sang/Wang Pangzi/Wu Xie/Zhang Qiling

Liu Sang/Wu Xie

Liu Sang/Wu Xie/Zhang Qiling

Liu Sang/Zhang Qiling

Liu Sang/Zhang Rishan

Qi Tie Zui/Zhang Qishan

Qi Tie Zui/Zhang Rishan

Wang Pangzi/Wu Xie

Wang Pangzi/Wu Xie/Zhang Qiling

Wang Pangzi/Zhang Qiling

Wu Xie/Xie Yuchen

Wu Xie/Zhang Qiling

Guidelines

1. Your creation must focus on your recipient’s requested ship (or one of their requested ships, if they have nominated multiple ones). While unrequested background ships are fine (unless listed as a Do Not Want), the focused ship must only be one of the requested ones. 2. You will be expected to create a gift matching your recipient’s request. Filling any specifying prompts is not obligatory, but try to create something you honestly think your recipient will enjoy! 3. You must not include anything that your recipient has listed as a DNW (Do Not Want). This goes for treats as well. 4. The minimum requirements for the gifts are 300 words for fic, one sketch on unlined paper for art (traditional or digital; no manips), or 30 seconds for a vid. 5. After the matching is done, all the requests will be made visible to everyone to allow for treating! There are no minimum requirements for treats (but remember to mind your recipient’s do not wants!). You can also create manips for treats. 6. This is an anonymous exchange: refrain from discussing your assignment in public. After the works are revealed, there’ll be one week anon period when the creators remain anonymous before the creator reveals. 7. If at any point you need to drop out, just click on the “default” button on your AO3 assignment page; we’ll find a pinch hitter to create a gift for your recipient instead. If you need an extension to finish your gift, contact the mods before the deadline. 8. After the reveals, comment on your gift in a timely manner. 9. Most importantly: be excellent to each other!

Sign-Up Information

Sign-ups will take place here on AO3, ending on September 11th. There, you can fill out details about your request and offer. You can edit your sign-up at any time until the sign-ups close on September 11th.

When signing up, you will be able to choose fandom and genre tags, as well as specify any additional details.

You will have to select the DMBJ canon you’re interested in creating and receiving a gift in:

Novels: Daomu Biji / The Grave Robbers’ Chronicles (including spinoffs, side stories, and extras)

TV: The Lost Tomb 1

TV: The Lost Tomb 2 Explore with the Note

TV: The Lost Tomb 2.5 Heavenly Palace on the Clouds

TV: Ultimate Note

TV: Sha Hai (and spin off movies)

TV: The Lost Tomb Reboot/The Sound of Providence (and spin offs)

TV: The Mystic Nine (and spin off movies)

Movie: Time Raiders

Movie: Reboot movies

This does not mean that you’re limited to requesting or creating a work during the canon timelines for those series/books. It’s just to mark which canons you’re familiar with to allow for easier matching: some participants might have a preference for a particular canon era, some might not be familiar with all the versions. You still have to choose your preferred canon eras even if you want to create or receive an AU.

You will also have to specify genres you’re interested in

Action/Adventure

Alternate Universe

Alternate Universe - Canon Divergence

Angst

Canon Compliant

Crack

Dark

Domesticity

Fluff

Humor

Hurt/Comfort

Porn With Plot

PWP

Requests

Fandom - you have to choose at least one. If you’re willing to receive a gift in any canon era, you can just click “Any”!

Genre - you have to choose at least three tags.

Ratings - you have to choose at least one. This will help your gifter know what you like and are comfortable with when they're coming up with ideas to fill your prompts.

Warnings - you have to choose at least one. This does not mean that you WILL receive a gift with warnings, it just lets your gifter know if you are comfortable receiving a gift with warnings or not.

Optional Details - here’s where you can go into more detail about your perfect exchange gift!

If you run out of slots in the Relationships section (there is a limit of 20), you can list additional potential rarepairs here. Also, if you don’t have a specific ship in mind, but would like any ship involving a particular character, you can say that instead (e.g. ‘Liu Sang / any’, ‘Pangzi / any’, etc.)

You can also include:

General Likes: your creator may, but doesn’t have to, include them. This doesn't have to be detailed prompts, just general themes you enjoy, like getting together or established relationship.

Please note that works featuring QPRs, ace, and/or aro characters are absolutely valid things to request in a ship exchange. You may also request a fully platonic relationship if you wish.

DNW (Do Not Wants): things that your creator must not include - squicks, triggers, characters or things that you simply don’t like. Remember that you don’t owe anyone an explanation about why something is a DNW, and that DNW are not meant to be taken personally. Just list the things you don’t like, “DNW: X, Y.”

Please list if you have any audio or visual triggers (such as flashing lights). This could be in your DNW or could be separate. Please also list song/music DNWs (e.g. "please no lyrics that use the n-word" or "please no lyrics in [specific language]" or “please no [specific genre/s of music”).

Prompts/specific ideas: if you have any prompts, you can also put them here! You can be as general or as detailed as you’d like, but remember that while your creator will try to make the best gift for you, filling a specific prompt is not obligatory. You can include a crossover prompt (with other DMBJ verse or other canons), but make sure it’s not the only prompt you have.

For vid prompts, please list things like genres/styles of music you like (or like in vids), vibes/tone/theme you’d like to see (e.g. “angsty amnesiac Xioage”, “Heisang crack”, etc.), and things like that. Please try to avoid giving one or two specific songs for a specific character/ship.

If you run out of space for your prompts, you can write a prompt post on another platform like Dreamwidth, Tumblr, GoogleDocs, etc. and put the link in your sign up.

If you chose novels as one of your fandoms, you can use this field to list the ones you’re familiar with, such as ‘Books 1-4′ , ‘main series only′, ‘main series + specific extras’, etc.

The requests will be made publicly visible after matching is done, so that others will be able to create treats (additional gifts) based on them!

Offers

Fandom - you have to choose at least one. If you can create works for any canon era, you can choose “Any”!

Genre - you have to choose at least three.

Ratings - you have to choose at least one. This will help matching what people are comfortable creating with what people are comfortable receiving.Warnings - you have to choose at least one. This does not mean that you have to create a gift with warnings, it's just for helping to match what people are comfortable writing with what people are comfortable receiving.

Optional Details - in this field, you can tell us more about the kind of works you like to create, for example if you really prefer established relationship, feel best with certain kinds of AUs, or like writing darkfic. We’ll take it into account when matching! By the same token, if there’s something you really don’t want to write, let us know here as well.

If you chose novels as one of your fandoms, you can use this field to list the ones you’re familiar with, such as ‘Books 1-4′ , ‘main series only′, ‘main series + specific extras’, etc.

In the optional details of your offer, you can also name people you don’t want to be matched to, for example your regular beta, and we will do our best to avoid matching you!

The offers will only ever be visible to the mods; never to anyone else.

Your Assignment

You will be matched to create a gift for someone who requested at least one of the fandoms that you offer, with as many similar genres/likes as possible. This exchange will be hand-matched, after using AO3’s matching algorithm to first generate the potential matches.

If you have any issues when you receive your assignment (you have a question about it or think there’s an issue with it), contact the mods as soon as possible. Do not contact your recipient on your own.

You will have to create a gift for your recipient, fulfilling the minimum requirements of fandom, genre, and ship, and avoiding any stated “do not wants”. Filling exact prompts is optional, but try to create something matching your recipient’s likes that they will enjoy!

You will have to post your gift to the exchange AO3 collection before the due date (November 30th), using the “gift this work to” option to give it to your recipient. Your work will remain in the collection only visible to you and the mods until the reveals happen. Remember to tag your work appropriately or use the “chose not to warn” warning.

Treating

Treats are additional gifts for the participants! To allow for treating, the requests will be made visible when matching is done. You can create treats at any time until the creator reveals! There are no minimum requirements for treats, and manips are also allowed in addition to fic, art, and vids. As with assignments, you have to respect the recipient’s Do Not Wants, and while the optional details are optional, try to create something fitting the listed likes. One treat can only be gifted to one person.

Pinch Hits

In case someone needs to drop out, we will look for a pinch hitter to complete their assignment. Pinch hits will be posted to this tumblr and the DMBJ Yu Cun Discord.

Extensions

If you think you can finish your assignment, but you need a few days more, you can always ask for an extension!

Multi-Chapter Fics

If you are writing a multi-chapter fic for the exchange and don’t want to drop the entire fic at once, these are the posting guidelines for it:

Multi-chapter fics that are assignment fills must be fully written and at least the first chapter posted by the assignment deadline, ready for the fic reveals on December 10th.

From December 10th, at least one chapter is to be posted daily.

All chapters of the fic must be posted by the time of author reveals and end of treating on December 17th (If the fic is more than 7 chapters long, then this will mean that multiple chapters will need to be posted on some days).

Multi-chapter fics that are treats can begin to be posted at any time, but must also be fully posted by December 17th.

Other Important Information

Make sure to check the email you use on AO3 frequently during the exchange, as it will be the primary means of communication. We might contact you if there is an issue with your sign-up or if your gift creator has a question for you.

If you’d rather we contact you on your twitter or tumblr, please leave your handle in the offer section of your sign-up.

If you have any questions at all, don’t hesitate to contact us here on tumblr or on Discord.

#daomu biji #dmbj #the lost tomb #ultimate note #tomb of the sea #mystic nine #reunion the sound of the providence #the lost tomb restart #the lost tomb reboot #sha hai #lao jiu men #盗墓笔记 #盗墓笔记2 #终极笔记 #重启之极海听雷 #沙海 #老九門 #time raiders

53 notes · View notes

kinhagamer · 8 years ago

Text

Lenovo ZUK Z2 Pro, o "rei do custo-benefício", tem 6 GB de memória RAM e preço interessante

Lenovo ZUK Z2 Pro, o “rei do custo-benefício”, tem 6 GB de memória RAM e preço interessante

A linha ZUK da Lenovo ficou famosa em todo mundo pelo alto custo-benefício. Essa característica rendeu aos aparelhos o apelido de “rei do custo-benefício“, sendo uma das melhores opções para quem busca um top de linha com preço mais interessante. A segunda geração, o Lenovo ZUK Z2, trouxe especificações fortes o suficiente para se destacar em 2016. E a versão mais avançada do modelo, o ZUK Z2…

View On WordPress

#128 GB #13 Megapixels #3100 mAh #4G LTE #6 GB memória RAM #Android 6.0 Marshmallow #desconto #dual-chip #Full HD #GearBest #Lenovo ZUK Z2 #LTPS IPS #promoção #QuickCharge 3.0 #Sensor de impressões digitais #snapdragon 820 #ZUI 2.5 #ZUK Z2 Pro

0 notes

palheodo · 6 years ago

Photo

Đọc thể loại xong thì đội cái mũ bảo hiểm zô ngồi coi sợ cua gắt trở tay ko kịp. Nhưng phàm càng chuẩn bị kỹ lưỡng thì sự tình không như mong chờ, chỉ có cua vài khúc gọi là và phanh kịp. Nữ chánh đóng hay xỉu luôn thấy quen quá gg mới nhớ là vợ cô gái Đan Mạch trong tay sương sương cái oscar quả cầu vàng các kiểu thì hỏi sao. Quan trọng nhấn mạnh gạch chân là phim này có KiKi nhầm Kobayashi Naoki san aka mami của Gun đóng, ôi mẹ ơi dáng đẹp nói tiếng anh ủng xịn khỏi chê đóng lại càng ok. Nội dung phim tạm được hack não dạng nhẹ quay đẹp thông điệp truyền tải chưa tới tình tiết tuy ko khiên cưỡng nhưng hơi nhạt và cũng ko giật gân như Netflix nó giật tít. Chủ yếu là coi diễn xuất của nữ chánh với đôi mắt buồn da diết đau đáu một nỗi đau dồn nén mấy chục năm trời. Chấm nhẹ nhàng 6.5/10 trong đó hết 2 điểm là cho Alicia Vikander 2 điểm cho đoàn phim còn lại 2.5 cho idol Naoki san của t vì đơn gi��n t là con fangirl 🥰🥰 Phim coi cho zui giết thời gian ok. #earthquakebird #netflix #movie #kobayashinaoki #naokisan #3jsb #sandaimejsoulbrothers #exiletribe #aliciavikander #saturday https://www.instagram.com/p/B47p-XaJPl4/?igshid=gc8qhp1fg7up

#earthquakebird #netflix #movie #kobayashinaoki #naokisan #3jsb #sandaimejsoulbrothers #exiletribe #aliciavikander #saturday

1 note · View note

muabandatdongnai · 4 years ago

Text

CẦN SANG GẤP 8000M² MTĐ LIÊN XÃ TÚC TRƯNG VA SUỐI ZUI , ĐẤT 300M², SHR GIA 11 TỶ

Chủ ngộp cần bán gấp đất để thu hồi vốn để trả nợ ngân hàng Đất ở xã túc Trưng Định quán DT 68x120 Đất có 300m² thích hợp xây dựng nhà xưởng, nhà trọ, nhà nghĩ dưỡng, đầu tư... Mặt đường bê tông 68m , đường đá mi 120m Đất cách quốc lộ 20 2km, đường nam lộ 1,5km Đất nằm giữa 4 cụm KCN là định quán, túc Trưng,suối nho, kcnc Na Goa vina Bán kính 2.5 km là chợ ,trạm y tế, UBND, BHX, TGDD... Pháp lý : sổ hồng riêng Liên hệ phi trao đổi trực tiếp

#MuabannhadatDongNai #NhadatCafeland source https://nhadat.cafeland.vn/can-sang-gap-8000m2-mtd-lien-xa-tuc-trung-va-suoi-zui-dat-300m2-shr-gia-11-ty-1873497.html

0 notes

levue · 8 years ago

Text

'The Goddesses' get featured in Calligaris NY Photo Exhibition

What a great feeling this was! Just 2.5 years after making LeVue a thing, I get chosen to be amongst 10 photographers in NY . I felt so honored. And the 2 photos that were chosen, I love. My subjects for the photos were super psyched. We all were just there like kids in a candy store.

Thanks to Calligaris NY, Macallan, and Aura Frames for throwing us such a wonderful event. The 9 other photographers were great too. The work ranged from brightly colored street portraits to black and white landscapes to nude bedroom pieces. 900 RSVPs? Unbelievable.

I have been recently focusing my attention to Fine Art Photography and I've been receiving a lot of great feedback. My two pieces that were chosen were apart of a series that were themed around Goddesses. One being called Hestia, with dancer/model Zui Gomez and the other being called Aphrodite, with MUA Jessica Marie. These two photos are just the tip of the iceberg in this series and when the series is complete, LeVue will be throwing it's very own exhibit and you will not want to miss it. Look out for the invite this summer!

Thanks again to everyone, and thanks Niki!

Connect with everone here

www.instagram.com/iam.zui

www.instagram.com/muneca._marie

www.instagram.com/the_macallan

www.instagram.com/calligarisy

www.instagram.com/auraframes

Me, trying not to show my excitement... Keep it cool ☺️

1 note · View note

xiaoquebanxiaoqueban · 5 years ago

Text

Fluke Vital Sign Patient Simulator ProSim 8 Multifunction Patient Simulator

ProSim 8 Vital Signs Patient Simulator

ProSim 8 Vital Signs Simulator provides comprehensive quality and safety testing of your patient monitor through non-invasive blood pressure (NIBP) static pressure linear and dynamic pressure reproducibility tests, EC13 and ACLS electrocardiogram waveforms to complete Nellcor and Nonin SpO2 hypoperfusion Liquid and Masimo Rainbow settings, the final patient monitor test quickly and easily. ProSim 8 has a professional ECG that maintains connectivity to ensure safe lead connections. It is a tester for patient monitor quality assurance and safety professionals.

ProSim 8 requires only 5 minutes for preventive maintenance testing to test ECG (including fetal ECG/IUP and arrhythmia), breathing, body temperature, invasive blood pressure/cardiac catheter, cardiac output, noninvasive blood <a href="https://www.yuadon.com/travel-adapters.html">gas deep fryer</a> pressure and blood oxygen Saturation (including Masimo multi-wavelength Rainbow setting). Wireless PC communication, customized presets, automatic sequencing, barcode scanning, onboard memory, direct data capture, printing functions and single-step adjustments can maximize productivity; customized carrying cases can also be used as mobile workstations.

The multilingual user interface is available in English, Spanish, German, French, Japanese, Italian and Chinese.

The multi-function patient simulator is 80% smaller and 17 kg lighter than a single functional simulator test tool. Eight-in-one multi-function patient simulator integrates electrocardiogram simulator, fetal simulator, arrhythmia simulator, breathing simulator, temperature simulator, invasive blood pressure simulator, cardiac output simulator, cardiac catheterization <a href="https://www.yuadon.com/brazil-socket-to-uk-plug-travel-adapter.html">pressure die casting parts</a> simulator, noninvasive All functions of blood pressure simulator and blood oxygen saturation tester, and it is the electrocardiogram that keeps connected the electrocardiogram of Rainbow multi-wavelength blood oxygen saturation simulator. Oxygen saturation r curve, accurate test and future non-invasive blood pressure quantification technology static pressure linear test repeatable noninvasive blood pressure simulation, physiological pressure pulse bar code scanning and direct data capture and printing function for dynamic pressure repeatability test On-board customizable patient presets and automatic sequencing, fast/convenient testing Multi-language user interface can provide language selection Easy to replace, long-life integrated battery optional PC interface software provides customizable programs /Checklist and automatic data capture/storage for remote PC-controlled test equipment and wireless communication for data transmission and automatic regulatory reporting

General specifications Temperature Operating temperature: 10 C to 40 C (50 F to 104 F) Storage: 20 C to +60 C (4 F to 140 F) Humidity 10% to 90%, non-condensing Altitude 3,000 meters (9,843 ft) Dimensions (L x W x H) 14.5 cm x 30.2 cm x 8.6 cm (5.7 x 11.9 x 3.4 inches) Display LCD Color Display Communication USB Device Upstream Port MiniB Connector for Computer Control USB Host Controller Port Type A , 5 V output, 0.5 A zui large load. Connector for keyboard, barcode reader and printer Wireless IEEE 82.15.4 power supply for computer control Li-ion rechargeable battery battery charger: 100 V to 240 V input, 15 V/2.0 A output. For best performance, the battery charger should be connected to a properly grounded AC power outlet. Battery life is 9 hours (shortest), 100 NIBP cycles (typical), weight 1.87 kg (4.2 lb), safety standard IEC/EN610101 3rd edition ; Pollution degree 2 CAT No certification CE, CSA, CTICK N10140, RoHS electromagnetic compatibility (EMC) IEC 613261: 2006

Detailed specifications Normal sinus rhythm waveform ECG reference The specified ECG amplitude is for lead II (calibration), from the R wave baseline to the peak. All other leads are proportional to it. Normal 12-lead sinus rhythm configuration with independent output with reference to the right leg (RL). Output to 10 universal ECG jacks, marked with different colors AHA and IEC standards. High level output 0.2 V/mV 5% amplitude that can be set with ECG amplitude on BNC connector 0.05 mV to 0.5 mV (in steps of 0.05 mV) 0.5 mV to 5 mV (in steps of 0.25 mV)

The other leads are proportional to lead II (reference lead), respectively in percentages: lead I: 70 lead II: 100 lead III: 30 lead V1: 24 lead V2: 48 lead V3: 100 Lead V4: 120 lead V5: 112 lead V6: 80 amplitude accuracy (2% of setting + 0.05 mV) ECG rate 10 BPM to 360 BPM, step of 1 BPM heart rate accuracy 1% of setting ECG waveform selection adult (80 ms) or neonatal (40 ms) QRS takes ST-segment elevation in adult only mode. 0.8 mV to +0.8 mV (in steps of 0.1 mV). Additional stride: + 0.05 mV and 0.05 mV default 60 BPM, 1.0 mV at start-up, adult QRS and 0 mV ST segment elevation arrhythmia pacemaker pulse amplitude 0 (off), 2, 4, 6, 8, 10 , 12, 14, 16, 18, 20, 50, 100, 200, 500 and 700 mV for lead II (reference lead) accuracy Reference lead II: (5% of setting + 0.2 mV)

All other leads: (10% setting + 0.4 mV) pacemaker pulse width 0.1 ms, 0.2 ms, 0.5 ms, 1 ms, and 2 ms 5% pacemaker arrhythmia atrial 80 BPM

Asynchronous 75 BPM

Recurring sinus rhythm pacing on demand

Occasional sinus rhythm pacing on demand

Room sequence

Invalid stimulation (once)

Non-functional start-up default amplitude 5 mV, width 1 ms, atrial waveform arrhythmia baseline normal sinus rhythm 80 BPMPVC lesion left lesion, standard timing (unless specified) supraventricular arrhythmia atrial fibrillation (thick or thin); atrial flutter ; Sinus arrhythmia; Missing beat (one time); Atrial tachycardia; Paroxysmal atrial tachycardia; Sinus rhythm; and Supraventricular tachycardia Premature beat arrhythmia Early beat atrial contraction (PAC); Premature sinus Contraction (PNC); PVC1 left ventricle; PVC1 left ventricle, early; PVC1 left ventricle, R wave falls on T wave; PVC2 right ventricle; PVC2 right ventricle, early; PVC2 right ventricle, R wave falls on T wave; and multiple sources Ventricular arrhythmias, PVC 6, 12, or 24 per minute; frequent multi-source PVC; dual veins; triple veins; multiple PVCs (at a time 2, 5, or 11 PVCs); single ventricular tachycardia (120 to 300 with a stride of 5); multiventricular tachycardia (5 types); ventricular fibrillation (thick or thin); and arrhythmia conduction defect first, second, or third-order block; Bundle branch block advanced heart life support shockable pulseless arrhythmia ventricular fibrillation (coarse), ventricular fibrillation (fine), unstable polymorphic ventricular tachycardia, non-shockable pulseless arrhythmia arrhythmia cardiac arrest symptomatic heartbeat Sinus bradycardia (< 60 BPM)

Second degree atrioventricular block, Murbitz type I

Second degree atrioventricular block, Murbitz type II

Complete/third degree atrioventricular block

Right bundle branch block

Left bundle branch block symptomatic tachycardia: regular narrow complex tachycardia (QRS <0.12 seconds) sinus tachycardia> 150 BPM

Supraventricular tachycardia Symptomatic tachycardia: regular wide complex tachycardia (QRS> 0.12 seconds) Sinus tachycardia> 150 BPM

Abnormal conduction supraventricular tachycardia SVT Irregular tachycardia atrial fibrillation (thick and thin), atrial flutter, unstable uniform ventricular tachycardia (120 BPM to 300 BPM), torsional ventricular tachycardia Ventricular tachycardia (long QT interval) ECG performance test amplitude (peak-to-peak value) 0.05 mV to 0.5 mV (in steps of 0.05 mV) 0.5 mV to 5 mV (in steps of 0.25 mV)

The other leads are proportional to lead II (reference lead), respectively in percentages: lead I: 70 lead II: 100 lead III: 30 lead V1 to V6: 100 pulse wave 30 BPM, 60 BPM, The pulse width is 60 ms square wave 0.125 Hz, 2 Hz, 2.5 Hz triangle wave 0.125 Hz, 2 Hz, 2.5 Hz sine wave 0.05 Hz, 0.5 Hz, 1, 2 Hz, 5 Hz, 10 Hz, 25 Hz, 30 Hz, 40 Hz, 50 Hz, 60 Hz, 100 Hz, and 150 Hz R-wave detection waveform Triangular pulse rate 30 BPM, 60 BPM, 80 BPM, 120 BPM, 200 BPM, and 250 BPM Width 8 ms to 20 ms, step size 2 ms, 20 ms To 200 ms, step width 10 ms Width accuracy (1% setting + 1 ms) QRS detection width 8 ms to 20 ms, step 2 ms, 20 ms to 200 ms, step 10 ms width accuracy (1% setting + 1 ms) rate 30 BPM, 60 BPM, 80 BPM, 120 BPM, 200 BPM and 250 BPMR wave uphill 0.875 amplitude, 0.4375 x width R wave downhill full amplitude, 0.5 x width S wave uphill 0.125 amplitude, 0.0625 x width high T wave suppression waveform QT ??interval 350 ms

T wave width 180 ms

T-waveform? Sine wave amplitude 0% to 150% reference lead amplitude, step 10% rate 80 BPM heart rate accuracy 1% amplitude accuracy (2% setting + 0.05 mV) ECG artifact type 50 Hz, 60 Hz, muscle, baseline drift, breath size For each lead, 25%, 50%, 100% of the normal sinus R-wave guide select all, RA, LL, LA, V1, V2, V3, V4, V5, V6 Fetal/mother electrocardiogram Fetal heart rate (fixed) 60 BPM to 240 BPM, step size 1 BPM Fetal heart rate (intrauterine pressure) starts at 140 BPM, and then decelerates intrauterine pressure waveform with pressure changes, early deceleration, late deceleration and uniformity Accelerated wave time 90 seconds, bell-shaped pressure curve, from 0 mmHg to 90 mmHg and back to 0 intrauterine pressure period 2 minutes, 3 minutes or 5 minutes; and manual default setting FHR 120 BPM, uniform deceleration wave, manual invasive blood pressure 2 channels, each of which can be individually parameterized and can be isolated from all other signals Input/output impedance 300 or 10% Exciter input range 2 to 16 V Peak exciter input frequency range AC to 5000 Hz Sensor sensitivity 5 (Default) or 40 V/V/mmHg pressure accuracy (1% setting + 1 mmHg) accuracy, DC excitation static pressure only 10 to + 300 mmHg, step size is 1 mmHg pressure unit mmHg or Kpa dynamic waveform type (default Pressure artery (120/80)

Radial artery (120/80)

Left ventricle (120/00)

Right ventricle (25/00)

Pulmonary artery (25/10)

Pulmonary artery wedge pressure (10/2)

Right atrium (central venous or CVP) (15/10) pressure variability The systolic and diastolic pressures are independently variable in steps of 1 mmHgSwanGanz sequence right atrium, right ventricle (RV), pulmonary artery (PA), pulmonary artery wedge pressure (PAW ) Cardiac catheter inspection chamber aorta, pulmonary valve and mitral valve breathing arteries, radial artery and left ventricle increase 5% to 10% <a href="https://www.yuadon.com/nema-plugs-and-connectors-and-receptacles.html">Keyword for: (fsyindi.com)</a> other 5 mmHg or 10 mmHgBP output ring DIN 5 pin boot default 0 mmHg respiratory rate 0 (Off), 10 BrPM to 150 BrPM in steps of 1 BrPM wave normal or ventilation ratio (inhalation: exhalation) normal 1:1, 1:2, 1:3, 1:4, 1:5 ventilation 1: 1Resistance change (? ?) 0.00? To 1.00? In steps of 0.05 ?, 1? To 5? In steps of 0.25? Accuracy increment (3% setting + 0.05 ?) Baseline 500 ?, 1000? (Default ), 1500 ?, 2000 ?, lead I, II, III accuracy baseline 5% respiratory lead LA or LL (default) apnea selection 12 seconds, 22 seconds or 32 seconds (one-time event) or continuous (apnea on Breathing OFF) The default is 20 BrPM at start-up, and the temperature is 30 C to 42.0 C in increments of 1.0 ?, the step size is 0.5 C. The accuracy is 0.4 C. Compatible yellow Springs, Inc. (YSI) 400 and 700 series output ring DIN 4 pin core output Measuring catheter type Baxter Edwards, 93a1317f Calibration factor 0.542 (0 C injection), 0.595 (24 C injection) Blood temperature 36 C (98.6 F) to 38 C (100.4 F) 2 %, 1 C injection volume 10 cc injection Temperature 0 C or 24 C output per minute 2.5 5, 10 liters 7.5% error injection curve available analog waveform left and right shunt curve can be used analog waveform calibration pulse 1 second 1.5 connector ring DIN 7 pin default 5 liters per minute at boot, 0 C injection, 37 C blood temperature noninvasive blood pressure pressure unit mmHg or kPa sphygmomanometer (manometer) range 10 mmHg to 400 mmHg resolution 0.1 mmHg accuracy (0.5% reading + 0.5 mmHg) pressure source target pressure range 20 mmHg to 400 mmHg resolution Rate 1 mmHg non-invasive blood pressure simulation pulse wave 500 ml non-invasive blood pressure system 2 mmHg maximum movement air volume 1.25 ml more simulation (systolic/diastolic pressure [MAP]) Adult: 60/30 (40), 80/50 (60) ; 100/65 (77); 120/80 (93); 150/100 (117); and 200/150 (167) and 255/195 (215) neonates: 35/15 (22); 60/30 ( 40); 80/50 (60); 100/65 (77); 120/80 (93) and 150/100 pressure variability: both systolic and diastolic blood pressure, variable in 1 mmHg unit repeatability 2 mmHg Synchronization within the range (regardless of the device under test in the case of a large pulse): Normal sinus heart rate: 30 BPM to 240 BPM at 1 ml Maximum heart rate: up to 240 BPM and pulses up to 1 ml1.25 ml Large heart rate: 180 BPM Synchronization: Arrhythmia Atrial premature beats (PAC), ventricular premature beats (PVC), atrial fibrillation and leaky leak test Target pressure 20 to 400 mmHg Time: 0:30 to 5:00 minutes: seconds, Step size is 30 seconds Leak rate 0 mmHg/minute to 200 mmHg/minute Pressure relief test range 100 to 400 mmHg blood oxygen saturation test (optional)% O2 range 30% to 100% resolution 1 %% O2 accuracy for photoelectric Saturation of the oximeter manufacturer's R curve UUT within a specific range: (1 word + specified UUT accuracy)

Saturation outside the specified range of UUT: monotonicity, unspecified accuracy 91% to 100% for Fluke medical test R curve (3 words + specified UUT accuracy)

81% to 90% (5 words + specified UUT accuracy)

71% to 80% (7 words + specified UUT accuracy)

Less than 7% monotonicity, unspecified heart rate 30 BPM to 300 BPM, step size 1 BPM. The blood oxygen saturation simulation is synchronized, and the ECG delay is 150 ms, with an accuracy of 1% of the set value. Transfer: The ratio of detector current to LED current, expressed in parts per million (ppm) Range 0 ppm to 300.00 ppm Resolution 0.01 ppm Accuracy +50 %/ 30% for compatible monitors, not for other instruments Specify. Choose according to finger size and color: dark, thick fingers, medium fingers, bright and thin fingers, newborn feet. In engineering mode, full range and resolution pulse amplitude range can be obtained 0% to 20.00% resolution 0.01% pseudo-respiration range: 0% to 5% passed

Resolution: 1%

Rate: All ProSim breath simulation settings Ambient light range: 0 to 5X transmitted light

Resolution: 1X

Frequency: DC, 50 Hz, 60 Hz, and 1 kHz to 10 kHz in steps of 1 kHz Masimo Rainbow technology uses the optional adapter provided by Masimo to simulate Masimo Rainbow technology, which can test Rainbow Multi-wavelength system compatible manufacturing through ProSim 2 wavelength simulation Products for manufacturers R curve Nellcor, Masimo, Nonin and Nihon Kohden for Fluke R curve Mindray, GEOhmeda, Philips/HP and BCI pre-defined imitation of normal hypertension low blood pressure tachycardia tachycardia bradycardia ventricular fibrillation cardiac arrest automatic determination Sequence monitor test sequence ECG sequence oximeter test sequence heart failure sequence arrhythmia sequence exercise sequence breathing sequence non-invasive blood pressure test sequence invasive blood pressure test sequence temperature sequence

Model name description price list ProSim 8

(3979409) ProSim 8 Vital Signs Simulator (USA) includes: ProSim 8 Getting Started Manual (3980667) ProSim 8 User Manual (3980671) ProSim 8 Battery Pack (4021085) USB Cable (4034393) Invasive Blood Pressure Cable, Unterminated (2392173) ProSim 8 carrying case (4034597) ProSim NIBP MANDREL SET (4308086) AC/DC power supply (2184298) AC power cord, United States (2201455) Ansur demo CD ProSim 801

(3979411) ProSim 8 Vital Signs Simulator (Schuko) includes: ProSim 8 Getting Started Manual (3980667) ProSim 8 User Manual (3980671) ProSim 8 Battery Pack (4021085) USB Cable (4034393) Invasive Blood Pressure Cable, Unterminated (2392173) ProSim 8 carrying case (4034597) ProSim NIBP MANDREL SET (4308086) AC/DC power supply (2184298) AC power cord, Schuko (2201437) Ansur demo CD ProSim 802

(3979427) ProSim 8 Vital Signs Simulator (UK) includes: ProSim 8 Getting Started Manual (3980667) ProSim 8 User Manual (3980671) ProSim 8 Battery Pack (4021085) USB Cable (4034393) Invasive Blood Pressure Cable, Unterminated (2392173) ProSim 8 carrying case (4034597) ProSim NIBP MANDREL SET (4308086) AC/DC power supply (2184298) AC power cord, United Kingdom (2201428) Ansur demo CD ProSim 803

(3979430) ProSim 8 Vital Signs Simulator (Japan) includes: ProSim 8 Getting Started Manual (3980667) ProSim 8 User Manual (3980671) ProSim 8 Battery Pack (4021085) USB Cable (4034393) Invasive Blood Pressure Cable, Unterminated (2392173) ProSim 8 carrying case (4034597) ProSim NIBP MANDREL SET (4308086) AC/DC power supply (2184298) AC power cord, Japan (2201419) Ansur demo CD ProSim 804

(3979448) ProSim 8 Vital Signs Simulator (Australia) includes: ProSim 8 Getting Started Manual (3980667) ProSim 8 User Manual (3980671) ProSim 8 Battery Pack (4021085) USB Cable (4034393) Invasive Blood Pressure Cable, Unterminated (2392173) ProSim 8 carrying case (4034597) ProSim NIBP MANDREL SET (4308086) AC/DC power supply (2184298) AC power cord, Australia (2201443) Ansur demo CD ProSim 805

(3979453) ProSim 8 Vital Signs Simulator (Brazil) includes: ProSim 8 Getting Started Manual (3980667) ProSim 8 User Manual (3980671) ProSim 8 Battery Pack (4021085) USB Cable (4034393) Invasive Blood Pressure Cable, Unterminated (2392173) ProSim 8 carrying case (4034597) ProSim NIBP MANDREL SET (4308086) AC/DC power supply (2184298) AC power cord, Brazil (3930831) Ansur demo CD ProSim SPOT

(3985658) ProSim SPO2 test module ProSim RAINBOW

(4034609) ProSim RAINBOW test cable

ProSim 8 cable kit PS8 WA/PRO cable Welch Allyn/Propaq cable set (includes: two TK1 BP cables (2198879), two UT4 low-profile 1/4-inch plugs, YSI 400 series compatible with 2 conductors (2523334), UT2 Tamp cable 700 series YSI (2199019) PS8 ACC kit ProSim 8 accessory kit (includes: DIN to miniDin adapter (3408564), HP/Phillips Inlivuew invasive blood pressure cable (2198902), GE Marquette Eagle/Dash/Solar invasive blood pressure cable (2199019), Welch Allyn Propaq/SpaceLabs Ultraview invasive blood pressure cable (2198879), USB wireless device (3341333), YSI4000 series temperature cable (2523334), YSI700 series temperature cable (2199019), CI3 cardiac output box (2392199), spare battery pack (4021085) ) PS8 DRAGER cable Drager Infinity cable set (includes: two SM1 BP cables (2198925), UT4, thin 1/4-inch plug, YSI 400 series compatible 2 conductor (2523334) PS8 GE cable GE Marquette Eagle/Dash/Solar cable set (Including: two MQ3 BP cables (2199627), UT4 low-profile 1/4-inch plugs, YSI 400 series compatible with 2 conductors (2523334), UT2 Tamp cable 700 series YSI (2199019), PROSIM84402GECO, DIN cardiac output Marq Eagle (4022300 ) PS8 HP/PHI cable HP/Phillips inlivue cable set (including: HP3 BP cable (2198902) two, HPT2 Tamp/cardiac output injection cable assembly (2199257), COA1 cable assembly (2199240), UT4, thin 1/4 Inch plug, YSI 400 series compatible with 2 conductors (2523334) PS8 NK cable ProSim 8 Nihon Kohden cable set (includes: Nihon KohdenNK1, BP cable (5M) (2462263) two, DIN to mindin adapter (34085 64), UT4, low-profile 1/4-inch plug, YSI 400 series compatible 2-conductor (2523334) PS8 SPACEL cable ProSim 8 SpaceLabs Ultraview cable set (including: TK1 BP cable (2198879) two, UT4 low-profile 1/4-inch plug, YSI 400 series is compatible with 2 conductors (2523334), UT2 Tamp cable 700 series YSI (2199019)

Cable 2198879BCI International TK1 (6M)

(2198879) 2198879 Critical Systems Inc. (1100) TK1 (6M)

(2198879) 2198887 Datascope DS1 (6F)

(2198887) 2200955 Datex (As/3, CS/3, Compact, Cardio Cap II, Critical Care, Light) DX1 (10F)

(2200955) 2199387 Fakuda Denshi (DS3300 series) FD2 (12M)

(2199387) 2198978GE Marquette Medical (7000 and TRAMAR series only) MQ2 (8M round)

(2198978) 2199627GE Marquette Medical (Dash, Eagle, Solar, Tram and MacLab) MQ3 (rectangle 11M)

(2199627) 2198893GE Marquette Medical (PPG/E for M DR) EM1 (6F)

(2198893)2199682GE Marquette Medical Corametrics (115, 116, 142, 145, 556) CM3 (Nicolet round 12M)

(2199682) 2198902 Hewlett Packard/Philips (78300, 78500, 78800, Merlin/Viridia/Omnicare (HP/Philips M1006B iBP module sensitivity is only 5 V/V/mmHg. HP3 cable should be selected for this application.) HP3 (12M 5 V)

(2198902) 2198916 Hewlett Packard/Philips (78300, 78500, 78800, Merlin/Viridia/Omnicare) HP4 (12M 40 V)

(2198916) 2199694 Hewlett Packard/Philips (8040A, M1350A) HP8 (intrauterine pressure only 12M 40 V) 2198879 Invivo Research TK1 (6M)

(2198879) 2198879 Ivy Biomedical (400 and 700 series) TK1 (6M)

(2198879) 2198940 Medical Data Electronics (Escort Series) PC1 (6M)

(2198940) 2198933 Mennen Medical (Horizon series) MM1 (6M)

(2198933) 2198879 North American Drager (Vitalert 2000) TK1 (6M)

(2198879) 2198940 Physio Control (VSM series) PC1(6M)

(2198940) 2198879 Protocol System (Propaq series) TK1 (6M) and ZOLL defibrillator

(2198879) 2190955 Puritan Bennett PB 240 DX1 (10F)

(2200955) 2199176 Quinton (Q Cath series) QM1 (6M)

(2199176)2199666Siemens (Micor/Mingo) SM3 (15M)

(2199666) 2198925 Siemens (SIRECUST series) (SM1 and Siemens medical sensor adapter (3368383E530U) for running a single invasive blood pressure channel on Siemens medical SC6000 and SC9000 series monitors) SM1 (10M)

(2198925) 2198879 SpaceLabs (1050, 1700, PCMS series) (SpaceLabs adapter 700002800 and 0120055100 and TK1, used when testing new UltraView command modules) TK1 (6M)

(2198925) 2392173 Universal unterminated UU1 ((only 5 pin DIN end)

(2392173) 2199019UT2 standard? Inch handset plug (compatible with 3 guide pins of YSI 700 series)

(2199019)2199291UT3 unterminated cable (only one end has DIN plug)

(2199291)2523334UT4 Miniature? Earpiece plug, compatible with YSI 400 series, two guide pins

(2523334) 2198893 Witt Biomedical EM1 (6F) DIN PB IBP, Schiller PB series invasive blood pressure cable (5M DIN)

(2198893)

Other spare parts Ansur PROSIM 6/8ProSim Ansur Test SoftwareBPPS68ProSim 6/8 battery pack 2392199CI3 cardiac output box

(2392199)MINIDIN/DIN invasive blood pressure MINIDIN to DIN invasive blood pressure adapter power supply ProSim 8 AC/DC power supply PROSIM 6/8 carrying case ProSim carrying case ProSim chamber NIBP test 500 ML rigid chamber PROSIM84402DIN cardiac output MARQ EAGLEUSB device USB Wireless device

Service Portfolio Customer Care Inquiry

:king

0 notes

cell4all · 5 years ago

Video

youtube

Ficha técnica Lenovo Zuk Edge Descrição das principais caracteristicas do Lenovo Zuk Edge, incluindo Rede de comunicações, tecnologia utilizada, detalhes sobre o display, informações das cameras frontais e traseiras, qualidade do video, todas conecções disponiveis com ou sem fio, principais sensores disponiveis, caracteristicas unicas como tv, rádio, etc e tecnologia e durabilidade da bateria. Ficha Técnica: Sistema Operacional: Android 7.0 ZUI 2.5 Nougat Disponibilidade: 2017/1 Dimensões: 142.9 x 74.5 x 7.68 mm Peso: 160 gramas Sim Card: Nano Dual Sim: Sim Gsm: Quad Band (850/900/1800/1900) HSPA+: Sim LTE: Sim Velocidade máxima de download: - Velocidade máxima de upload: - Processador: Dual-core 2.35 GHz Kryo + Dual-core 1.6 GHz Kryo Chipset: MSM8996 Pro Qualcomm Snapdragon 821 64 Bit: Sim GPU: Adreno 530 RAM: 6 GB Memória Max: 64 GB Memória Expansível: Não Polegadas: 5.5 Resolução: 1080 x 1920 pixel Densidade de pixels: 401 ppi Tipo: IPS LCD Cores: 16 milhões Megapixel: 13 Mp Resolução: 4128 x 3096 pixel Aperture Size: F 2.2 Estabilização: Digital Autofoco: Sim Foco por toque: Sim Flash: LED HDR: Sim Localização: Sim Detecção facial: Sim Câmera Frontal: 8 Mp Resolução da gravação: Full HD Auto focagem de vídeo: Sim FPS da gravação: 30 fps Estabilização de vídeo: Sim Vídeo Câmera Frontal: Full HD, 30fps Wi-Fi: 802.11 a/b/g/n/ac Bluetooth: 4.1 com A2DP/LE USB: Type-C 3.1 NFC: Não GPS: A-GPS/GLONASS/BeiDou Acelerômetro: Sim Proximidade: Sim Giroscópio: Sim Bússola: Sim Impressão digital: Sim Mic. de Redução de Ruído: Sim Radio FM: Sim Tv: Não Vibração: Sim Viva Voz: Sim Outros: Wi-Fi Direct Wi-Fi hotspot Tipo: LiPo Ampere: 3100 mAh Royalty Free Music from Bensound Contato: cell4alloriginal(@)gmail.com HASHTAGS #cell4all #LenovoZukEdge #fichatecnica #celular #celularbarato #celulargamer #fichatecnicacelular by cell4all

#YouTube #celular #ficha tecnica #celular barato #multilaser #positivo

0 notes

eyorumlar-blog · 6 years ago

Text

Lenovo ZUK Edge

New Post has been published on https://www.eyorumlar.com/lenovo-zuk-edge/

Lenovo ZUK Edge

Lenovo ZUK Edge Kullanıcı yorumları, şikayetler ve fiyatlara sayfa altından ulaşabilirsiniz.

Lenovo ZUK Edge Fiyatları

03-01-2019

Telefon Özellikleri

Ekran

Ekran Ebatı 5.5 İnç

Ekran Çözünürlüğü 1080×1920 (FHD) Pixel

Piksel Yoğunluğu 401 PPI

Ekran Teknolojisi IPS LCD

Ekran Özellikleri Çizilmeye Dirençli Cam

Multi Touch

Parmak izi Engelleyici Ekran Kaplaması

Eğimli Ekran (2.5D)

85% NTSC

500 cd/m² (nit) Parlaklık

1500:1 Kontrast Oranı

Ekran Dayanıklılığı Corning Gorilla Glass

Dokunmatik Türü Kapasitif Ekran

Kullanıcı Arayüzü ZUI

Kullanıcı Arayüz Sürümü ZUI 2.5

Renk Adedi 16 Milyon

Ekran / Gövde Oranı 78.33 %

Pil

Pil Kapasitesi 3100 mAh

Şarj USB Type-C

Pil Teknolojisi Lithium Polymer (Li-Po)

Değişebilen Pil Mevcut Değil

Pil Özellikleri Hızlı Şarj

Qualcomm Quick Charge 3.0

Kamera

Kamera Çözünürlüğü 13 MP

Optik Görüntü Sabitleyici Mevcut Değil

Kamera Özellikleri Phase Detect Auto-Focus (PDAF)

Hızlı Odaklama (0.1 sn)

Hızlı Odaklama

Panorama

HDR

Otomatik odaklama

Yüz Algılama

Elle Odaklama

Konumlama

Hibrit Otomatik Odaklama (PDAF + CDAF)

Dijital görüntü sabitleyici (EIS)

ISOCELL Görüntü Sensörü

Makro (Macro) Çekim (10 cm)

1.34µm Piksel

5 Elementli Lens

Flaş LED

Diyafram Aralığı F2.2

Video Kayıt Çözünürlüğü 2160p (Ultra HD) 4K

Video Fbs Değeri 30 fps

Video Kayıt Özellikleri Dijital görüntü sabitleyici (EIS)

Yavaş Çekim Video Kayıt (Slow motion video)

Ön Kamera Çözünürlüğü 8 MP

Ön Kamera Video Çözünürlüğü 1080p

Ön Kamera Fbs Değeri 30 fps

Ön Kamera Diyafram Aralığı F2.2

Ön Kamera Özellikleri Yüz Algılama

Geniş Açılı

1.12μm Piksel

Ana Donanım Özellikleri

Yonga Seti (Chipset) Qualcomm Snapdragon 821 MSM8996 Pro

Ana İşlemci (İşlemci ) Dual-core 2.35 GHz Kryo

İşlemci Frekansı 2.35 GHz

İşlemci Çekirdeği 4 Çekirdek

İşlemci Mimarisi ARMv8-A (64-bit)

1. Yardımcı İşlemci Dual-core 2.0 GHz Kryo

Grafik İşlemcisi (GPU) Adreno 530

GPU Frekansı 653 MHz

İşlemci Üretim Teknolojisi 14 nm

AnTuTu Puanı (v6) 153.000 Puan

Bellek (RAM) 4 GB

RAM Tipi LPDDR4

RAM Kanalları Çift Kanal

RAM Frekansı (Maks.) 1866 MHz

Dahili Depolama 64 GB

Dahili Depolama Biçimi UFS 2.0

Hafıza Kartı Desteği Mevcut Değil

Tasarımı

Boy 142.9 mm

En 74.5 mm

Kalınlığı 7.68 mm

Ağırlığı 160 Gram

Renk Seçenekleri Beyaz

Siyah

Gövde Malzemesi (Kapak) Cam

Gövde Malzemesi (Çerçeve) Metal

Ağ Bağlantıları

2G Mevcut

2G Frekansları 850 MHz 900 MHz 1800 MHz 1900 MHz

2G Teknolojisi GSM GPRS EDGE

3G Mevcut

3G Frekansları 850 (band 5) MHz 900 (band 8) MHz 1900 (band 2) MHz 2100 (band 1) MHz

3G İndirme 42.2 Mbps

3G Karşıya Yükleme 5.76 Mbps

3G Teknolojisi HSPA+

4G Mevcut

4G Frekansları 800 (band 20) MHz

850 (band 5) MHz

900 (band 8) MHz

1700/2100 (band 4) MHz

1800 (band 3) MHz

1900 (band 2) MHz

2100 (band 1) MHz

2600 (band 7) MHz

4G İndirme 600 Mbps

4G Karşıya Yükleme 100 Mbps

4G Teknolojisi LTE (Cat.12)

4.5G Desteği Mevcut

Yazılımı

İşletim Sistemi Android

İşletim Sistemi Sürümü Android 7.0 (Nougat)

Kablosuz Bağlantılar

Wi-Fi Kanalları Wi-Fi 5 (802.11 a/b/g/n/ac)

Wi-Fi Özellikleri Dual-Band

Wi-Fi Direct

Wi-Fi Hotspot

Bluetooth Sürümü 4.1

Bluetooth Özellikleri BLE

infrared Mevcut Değil

Navigasyon Özellikleri Galileo

A-GPS

GLONASS

BDS

Çoklu Ortam

Ses Formatları AMR-NB APE AMR-WB AAC/AAC+/eAAC+ M4A PCM MP3 VBR MIDI MKA MP3 WAV FLAC AAC WMA AMR OGG

Ses Çıkışı 3.5 mm

Özellikler

Suya Dayanıklılık Mevcut Değil

Toza Dayanıklılık Mevcut Değil

3G Görüntülü Arama (Şebeke ile) Mevcut Değil

Görüntülü Konuşma (Uygulama) Mevcut

Sensörler Kalp Atış Hızı Sensörü

Jiroskop

Hall Sensörü

Pusula

Yakınlık Sensörü

Ortam Işığı Sensörü

İvmeölçer

UV Sensörü

Altimetre

Parmak izi Okuyucu Mevcut

Parmak izi Okuyucu Özellikleri Ana Ekran Tuşunda (Ön)

Algılama Hızı 0.09 sn

Navigasyon Tuşu Fonksiyonu

Servis ve Uygulamalar Gürültü Engelleyici İkinci Microfone

Dirac HD Sound

Ek Bağlantılar

USB Sürümü 3.1 Gen 1 (USB 3.0)

USB Bağlantı Tipi USB Type-C

Hat Adedi Çift Hat

Çift Hat Özelliği Dual Standby

SIM Nano-SIM (4FF)

Ana Detaylar

Çıktığı Tarih 2016

Piyasaya İlan Edildiği Zaman 20/12/2016

Durum Henüz Ülkemizde Satışı Mevcut Değil

Lenovo ZUK Edge Kullanıcı Yorumları

Lenovo ZUK Edge hakkında merak ettiklerinizi sorabilirsiniz.

0 notes

awesome-karen-blog2 · 8 years ago

Text

ZUK Z1 начал получать Android Nougat

Ассортимент смартфонов ZUK постепенно расширяется и уже включает шесть разных моделей. Тем не менее производитель не забывает о первооткрывателе линейки и бренда – смартфоне ZUK Z1 2015 года выпуска. На днях девайс без каких-либо официальных анонсов начал получать обновление до новой версии фирменной оболочки ZUI 2.5 на базе Android 7.0 Nougat. Некоторые пользователи уже получили уведомление о…

View On WordPress

0 notes

dmbjexchange · 2 years ago

Text

Small-Med Ships Exchange Signups Open

It’s time for the Daomu Biji Small-Med Ships Exchange, a fic, art and vid exchange for DMBJ ships where more than 3% of English-language authors have posted fics on AO3.

In this exchange, participants will be anonymously matched to create gifts for one another during a six week creating period.

Please read this post carefully before signing up.

Schedule

May 4: Signups close May 7: Assignments out June 25: Assignments due July 2: Works reveals July 9: Creator reveals & treats deadline

Allowed Ships

Any DMBJ ship (other than pingxie or heihua) which, as of April 24, 2023, has had more than 3% of English-language authors post fics for it on AO3.

For this year's exchange, this means the following ships are allowed:

Er Yue Hong/Zhang Qishan Hei Xiazi/Huo Xiuxiu/Xie Yuchen Kan Jian/Liu Sang Liang Wan/Zhang Rishan Liu Sang/Wang Pangzi Liu Sang/Wang Pangzi/Wu Xie/Zhang Qiling Liu Sang/Wu Xie Liu Sang/Wu Xie/Zhang Qiling Liu Sang/Zhang Qiling Liu Sang/Zhang Rishan Qi Tie Zui/Zhang Qishan Qi Tie Zui/Zhang Rishan Wang Pangzi/Wu Xie Wang Pangzi/Wu Xie/Zhang Qiling Wang Pangzi/Zhang Qiling Wu Xie/Xie Yuchen

Guidelines

1. Your creation must focus on your recipient’s requested ship (or one of their requested ships, if they have nominated multiple ones). While unrequested background ships are fine (unless listed as a Do Not Want), the focused ship must only be one of the requested ones. 2. You will be expected to create a gift matching your recipient’s request. Filling any specifying prompts is not obligatory, but try to create something you honestly think your recipient will enjoy! 3. You must not include anything that your recipient has listed as a DNW (Do Not Want). This goes for treats as well. 4. The minimum requirements for the gifts are 300 words for fic, one sketch on unlined paper for art (traditional or digital; no manips), or 30 seconds for a vid. 5. After the matching is done, all the requests will be made visible to everyone to allow for treating! There are no minimum requirements for treats (but remember to mind your recipient’s do not wants!). You can also create manips and fanvids for treats. 6. This is an anonymous exchange: refrain from discussing your assignment in public. After the works are revealed, there’ll be one week anon period when the creators remain anonymous before the creator reveals. 7. If at any point you need to drop out, just click on the “default” button on your AO3 assignment page; we’ll find a pinch hitter to create a gift for your recipient instead. If you need an extension to finish your gift, contact the mods before the deadline. 8. After the reveals, comment on your gift. 9. Most importantly: be excellent to each other!

Sign-Up Information

Sign-ups will take place here on AO3, ending on May 4th. There, you can fill out details about your request and offer. You can edit your sign-up at any time until the sign-ups close on May 4th.

When signing up, you will be able to choose fandom and genre tags, as well as specify any additional details.

You will have to select the DMBJ canon you’re interested in creating and receiving a gift in:

Novels: Daomu Biji / The Grave Robbers’ Chronicles (including spinoffs, side stories, and extras)

TV: The Lost Tomb 1

TV: The Lost Tomb 2 Explore with the Note

TV: The Lost Tomb 2.5 Heavenly Palace on the Clouds

TV: Ultimate Note

TV: Sha Hai (and spin off movies)

TV: The Lost Tomb Reboot/The Sound of Providence (and spin offs)

TV: The Mystic Nine (and spin off movies)

Movie: Time Raiders

You will also have to specify genres you’re interested in

Action/Adventure

Alternate Universe

Alternate Universe - Canon Divergence

Angst

Canon Compliant

Crack

Dark

Domesticity

Fluff

Humor

Hurt/Comfort

Porn With Plot

PWP

Requests

Fandom - you have to choose at least one. If you’re willing to receive a gift in any canon era, you can just click “Any”!

Genre - you have to choose at least three tags.

Ratings - you have to choose at least one. This will help your gifter know what you like and are comfortable with when they're coming up with ideas to fill your prompts.

Warnings - you have to choose at least one. This does not mean that you WILL receive a gift with warnings, it just lets your gifter know if you are comfortable receiving a gift with warnings or not.

Optional Details - here’s where you can go into more detail about your perfect exchange gift!You can include:

General Likes: your gifter may, but doesn’t have to, include them. This isn’t a place for detailed prompts, just general themes you enjoy, like getting together or established relationship.

Please note that fics featuring QPRs, ace, and/or aro characters are absolutely valid things to request in a ship exchange.

For vid prompts, please list things like genres/styles of music you like (or like in vids), vibes/tone/theme you’d like to see (e.g. “angsty amnesiac Xioage”, “Fuba crack”, etc.), and things like that. Please try to avoid giving one or two specific songs for a specific character/ship.

If you chose novels as one of your fandoms, you can use this field to list the ones you’re familiar with, such as ‘Books 1-4′ , ‘main series only′, ‘main series + specific extras’, etc.

The requests will be made publicly visible after matching is done, so that others will be able to create treats (additional gifts) based on them!

Offers

Fandom - you have to choose at least one. If you can create works for any canon era, you can choose “Any”!

Genre - you have to choose at least three.

If you chose novels as one of your fandoms, you can use this field to list the ones you’re familiar with, such as ‘Books 1-4′ , ‘main series only′, ‘main series + specific extras’, etc.

In the optional details of your offer, you can also name people you don’t want to be matched to, for example your regular beta, and we will do our best to avoid matching you!

The offers will only ever be visible to the mods; never to anyone else.

Your Assignment

You will have to post your gift to the exchange AO3 collection before the due date (June 25th), using the “gift this work to” option to give it to your recipient. Your work will remain in the collection only visible to you and the mods until the reveals happen. Remember to tag your work appropriately or use the “chose not to warn” warning.

Treating

Pinch Hits

In case someone needs to drop out, we will look for a pinch hitter to complete their assignment. Pinch hits will be posted to this tumblr and the DMBJ Yu Cun Discord.

Extensions

If you think you can finish your assignment, but you need a few days more, you can always ask for an extension!

Multi-Chapter Fics

If you are writing a multi-chapter fic for the exchange and don’t want to drop the entire fic at once, these are the posting guidelines for it:

Multi-chapter fics that are assignment fills must be fully written and at least the first chapter posted by the assignment deadline, ready for the fic reveals on July 2nd.

From July 2nd, at least one chapter is to be posted daily.

All chapters of the fic must be posted by the time of author reveals and end of treating on July 9th (If the fic is more than 7 chapters long, then this will mean that multiple chapters will need to be posted on some days).

Multi-chapter fics that are treats can begin to be posted at any time, but must also be fully posted by July 9th.

Other Important Information

If you’d rather we contact you on your twitter or tumblr, please leave your handle in the offer section of your sign-up.

If you have any questions at all, don’t hesitate to contact us here on tumblr or on Discord.

#dmbj #daomu biji #the lost tomb #the lost tomb 2 #the lost tomb 2.5 #ultimate note #reunion the sound of the providence #the lost tomb restart #the lost tomb reboot #tomb of the sea #the mystic nine #time raiders #explore with the note #heavenly palace on the clouds #sha hai #lao jiu men

38 notes · View notes