#alloycarbon

[alloycarbonsteel]

Alloy Carbon Steel

Alloy Carbon Steel are stockiest; supplier and manufactures of carbon steel, alloy steel, tool steel, mold steel and for more info call us at: 8076217931

[alloycarbonsteel]

C45/EN8/EN8D/EN9 Steel in Bangalore:

ALLOY CARBON STEEL are stockiest; supplier and manufactures of carbon steel, alloy steel, tool steel, mold steel. We have experience of more than 50 years in iron and steel industries.

Alloy Carbon Steel are committed to provide best and varieties of products at reasonable, best price to customers. To know more about our products just click and give us chance to serve you and fulfil your requirements.

The particular heat treatment and processing circumstances that materials like EN8, EN8D, and C45 go through might affect their hardness. I can, however, give you a broad picture of their usual hardness values as follows :

EN8: When it is in its normalized state, its Brinell Hardness (HB) is normally between 200 and 250. Hardness can increase dramatically after quenching and tempering, frequently reaching levels between 30 and 40 HRC (Rockwell Hardness C-scale).

EN8D: Essentially, EN8D is an EN8 variation with a little higher carbon content. Generally speaking, EN8D has a harder texture than EN8. In its state of normalcy: It may have a hardness of 200–250 HB, similar to EN8.

C45: In its normalised state, C45 typically has a hardness of 170 to 210 HB. Following quenching and tempering, the hardness can rise significantly and is typically in the range of 55 to 58 HRC.

EN9: EN 9 steel is a medium carbon steel grade used in general engineering purposes. Its hardness can vary based on the heat treatment it has undergone and other factors. The hardness of EN 9 steel can typically range from around 180 to 280 on the Vickers hardness scale (HV).

Following heat treatment, the hardness can reach hardness values of between 30 and 45 HRC, a significant increase in hardness.

Properties of C45:

Strength: Good hardness and tensile strength.

Machinability: Excellent machinabilitywhenhot rolled or in its normalized state.

Weldability: It is weldable, however care must be taken to prevent cold cracking.

Properties of EN8:

Strength: Excellent toughness and tensile strength.

Machinability: From decent to excellent.

Weldability: It is weldable, however care must be taken to prevent cold cracking.

Properties of EN8D:

Strength: Greater hardness and tensile strength than EN8.

Machinability: Excellent machinability is a must.

Weldability: In general, it can be welded, but care must be given to guarantee the required mechanical qualities and prevent cold cracking.

Properties of EN9:

Strength: The yield strength of EN 9 steel is usually between 350 MPa to 600 MPa when in the normalized condition. Again, the specific value can depend on various factors.

Machinability: EN 9 steel, when in the normalized or annealed condition, has good machinability. However, it’s essential to use appropriate speeds and feeds to achieve desired results.

Weldability: EN 9 can be welded using standard methods. Preheating and post-weld heat treatment might be necessary for specific applications to minimize the risk of cracking and to achieve desired mechanical properties in the weld region.

Here are some common uses of these materials:

C45: C45 steel is frequently used for parts and components, such as gears, shafts, axles, and bolts, that need to be moderately strong and robust.

EN8: EN8 steel is frequently used in general engineering applications, such as automobile and construction equipment parts, machinery, and machinery.

EN8D: Crane wheels, machine parts, gears, shafts, axles, bolts and studs are applications of en8d steel.

EN9: EN9 is often used in the manufacture of various engineering components such as shafts, gears, studs, bolts, and spindles due to its good strength and toughness.

TYPES OF OTHER GRADES AVAILABLE :

C45, EN8, EN9, EN19, EN24, EN31,EN36C, EN41B, EN47, EN353, IS2062, 42Crmo4, HCHCR, OHNS, D2, D3, H-11, H-13,M2, M35, M42, M48,1.2714, SKD-11, P20, P20+S, P20+Ni, P20+Ni+HH, SAE 4140, SAE4340, SAE 8620, 16MNCR5, 20MNCR5, C35, C40, C50, C60, CK45, 40C8, 45C8, 55C8, C55MN75, SAE 52100, S40C,S355J2G3.

AREA OF SUPPLYING:

Uttar Pradesh:

Kanpur,Lucknow,Ghaziabad,Agra,Meerut,Varanasi,Prayagraj,Bareilly,Aligarh,Moradabad,Saharanpur,Gorakhpur,Noida, greater Noida, udham nagar,Firozabad,Jhansi,Muzaffarnagar,Mathura,Ayodhya,Rampur,Shahjahanpur,FarrukhabadFategarh,Budaun,Maunath,Bhanjan,Hapur,Etawah,Mirzapur,Vindhyachal,Bulandshahr,Sambhal,Amroha,Hardoi,Fatehpur,Raebareli,Orai,Sitapur,Bahraich,Modinagar,Unnao,Jaunpur,Lakhimpur,Hathras,Banda,Pilibhit,Barabanki,Khurja,Gonda,Mainpuri,Lalitpur,Etah,Deoria,Badaun,Ghazipur,Sultanpur,Azamgarh,Bijnor,Sahaswan,Basti,Chandausi,Akbarpur,Ballia,Tanda,Shikohabad,Shamli,Awagarh,Kasganj.

Rajasthan:

Jaipur, Jodhpur, Kota ,Bikaner ,Bhiwadi ,Ajmer ,Udaipur ,Bhilwara ,Alwar ,Bharatpur,bharan ,Sri Ganganagar ,Sikar ,Pali ,Tonk ,Kishangarh ,Beawar ,Hanumangarh ,Dhaulpur ,Gangapur City, SawaiMadhopur ,Churu ,Jhunjhunu ,Baran ,Chittaurgarh ,Makrana ,Nagaur ,Banswara ,Dungarpur, pratapgarh

Haryana:

Faridabad (New Township) ,Gurgaon , Panipat, Yamunanagar, Rohtak, Hisar, Karnal, Sonipat, Panchkula (Urban Estate), Ambala Sadar, Bhiwani, Ambala, Sirsa, Bahadurgarh, Jind, Thanesar, Kaithal, Rewari, Palwal, Hansi, Narnaul, Fatehabad, Gohana, Tohana, Narwana.

Other Region: Tamil Nadu, Chennai, Pune, Maharashtra, Nagpur, Bangalore, West-Bengal, Kanyakumari, Odhissa

For more details:

Phone no-8076217931

Office Address:

Alloy Carbon Steel

693 Saini Vihar, Mundka, Delhi 110041

Email id-sumit_garg_1@yahoo.co.in

Website Link-http://alloycarbonsteel.com/

[alloycarbonsteel]

EN24 / EN24T ALLOY STEEL IN MAHARASHTRA

Where we use EN24/EN24T Alloy Steel :

Steel Equivalents for EN24:

Numerous nations have been motivated to investigate the potential of high-strength nickel-chromium-molybdenum steels to fulfill their requirements by the widespread use of EN24 alloy steel. The following are some instances of EN24’s worldwide equivalents :

Aerospace 4340, USA.

34CrNiMo6 in Germany.

1.6582 in France and 34NiCrMo8 / 35NCD6 in Sweden.

14.2541 in Spain.

SNCM447, F1.272, S95 / S119 in Japan.

Chemical composition of En24:

Carbon 0.36–0.44%

Chromium 1.00–1.40%

Molybdenum 0.20–0.35%

Nickle 1.30–1.70%

Properties of EN24 Steel :

EN24 exhibits exceptional shock resistance and high tensile strength, especially when it is heat-treated (EN24T). It is an adaptable material that is simple to work, forge, or stamp. EN24 can be machined both when it’s annealed and after it’s hardened and tempered.

Strength and Versatility of EN24 Steel :

EN24 combines great shock resistance with remarkable tensile strength, especially in its heat-treated form (EN24T). It’s an adaptable material that works well for machining, stamping, and forging. EN24’s machinability varies:

EN24 Steel Heat Treatment :

The heat treatments for En24 materials, which include normalizing, hardening, and tempering, are mentioned below.

Hardening: oil quench, 830 to 860 °C (1525–1580 °F),

Temperature range for tempering: 550–660 °C (1020–1220 °F)

Dimensions of En24 Alloy steel :

En24 bright bar:

Diameter 10mm to 18mm

Length upto 3m (meter)

En24 rolled round :

Diameter 20mm to 160mm

Length upto 6m, 9m, 18m (meter)

En24 forged round :

Diameter 170mm to 450mm

Length upto 6m, 9m, 18m (meter)

En24 flat bar and square bar rolled and forged :

Thickness 20mm to 250mm

Width 100 mm to 600mm

Length upto 6m, 9m, 18m (meter)

Typical Applications for EN24 Steel :

Gears for power gearbox and other gears that need to be as hard as possible. Gearbox shafts, propeller shafts, axles, and cranks all need strong, high tensile characteristics. Certain cranks, connecting rods, and other components need to be rigid while maintaining a high level of durability.

TYPES OF OTHER GRADES AVAILABLE :

C45, EN8, EN9, EN19, EN24, EN31,EN36C, EN41B, EN47, EN353, IS2062, 42Crmo4, HCHCR, OHNS, D2, D3, H-11, H-13,M2, M35, M42, M48,1.2714, SKD-11, P20, P20+S, P20+Ni, P20+Ni+HH, SAE 4140, SAE4340, SAE 8620, 16MNCR5, 20MNCR5, C35, C40, C50, C60, CK45, 40C8, 45C8, 55C8, C55MN75, SAE 52100, S40C,S355J2G3.

AREA OF SUPPLYING:

Uttar Pradesh:

Kanpur, Lucknow, Ghaziabad, Agra, Meerut, Varanasi, Prayagraj, Bareilly, Aligarh, Moradabad, Saharanpur, Gorakhpur, Noida, greater Noida, udham nagar, Firozabad, Jhansi, Muzaffarnagar, Mathura, Ayodhya, Rampur, Shahjahanpur, Farrukhabad Fategarh, Budaun, Maunath,Bhanjan, Hapur, Etawah, Mirzapur, Vindhyachal, Bulandshahr, Sambhal, Amroha, Hardoi, Fatehpur, Raebareli, Orai, Sitapur, Bahraich, Modinagar,Unnao, Jaunpur, Lakhimpur, Hathras, Banda, Pilibhit, Barabanki, Khurja, Gonda, Mainpuri, Lalitpur, Etah, Deoria, Badaun, Ghazipur, Sultanpur, Azamgarh, Bijnor, Sahaswan, Basti, Chandausi, Akbarpur, Ballia, Tanda, Shikohabad, Shamli, Awagarh, Kasganj.

Rajasthan:

Jaipur, Jodhpur, Kota ,Bikaner, Bhiwadi, Ajmer ,Udaipur ,Bhilwara ,Alwar ,Bharatpur, bharan ,Sri Ganganagar ,Sikar ,Pali ,Tonk ,Kishangarh ,Beawar ,Hanumangarh ,Dhaulpur ,Gangapur City, SawaiMadhopur ,Churu ,Jhunjhunu ,Baran ,Chittaurgarh ,Makrana ,Nagaur ,Banswara ,Dungarpur, pratapgarh.

Haryana:

Faridabad (New Township) ,Gurgaon , Panipat, Yamunanagar, Rohtak, Hisar, Karnal, Sonipat, Panchkula (Urban Estate), Ambala Sadar, Bhiwani, Ambala, Sirsa, Bahadurgarh, Jind, Thanesar, Kaithal, Rewari, Palwal, Hansi, Narnaul, Fatehabad, Gohana, Tohana, Narwana.

Other Region: Tamil Nadu, Chennai, Pune, Maharashtra, Nagpur, Bangalore, West-Bengal, Kanya-kumari, Odhissa

For more details:

Phone no-8076217931

Office Address:

Alloy Carbon Steel

693 Saini Vihar, Mundka, Delhi 110041

Email id-sumit_garg_1@yahoo.co.in

Website Link-http://alloycarbonsteel.com/

[alloycarbonsteel]

EN41B ALLOY STEEL

EN41B alloy steel/tool steel:

En41B is a completely famous grade of low carbon Manganese Free Cutting Steel. It will obtain high wear resistance & abrasion resistance,high toughness, and excellent ductility after nitrided.

Equivalent grades of EN41B tool steel:GermanyChinaJapan  UK        France41CrAlMo7/1.8509 34CrAlMo5/1.850738CrMoAlSACM645  905M39/905M3140CAD6.12/30CAD6.12

Chemical composition of EN41B alloy steel:ElementCSiMnAlPCrSMoContent (%)0.35-0.450.10-0.45≤0.651.90-1.30≤ 0.0351.40-1.80≤ 0.0350.10-0.25

Hardness of EN41B alloy steel:

Hardness: max 229HB

Physical Properties of EN41B tool steel:DENSITY (LB/IN 3)0.292DENSITY (G/CM 3)8.08MELTING POINT (°F)2600MELTING POINT (°C)1425

Forging Property:

EN41B metal forging temperature:850 – 1200°C,cooling as slowly as possible in sand after solid.

Heat Treatment:ANNEALINGHARDENINGTEMPERINGNORMALIZINGTempTemp( °C)Temp( °C)Temp( °C)840°C – 870°C930°C – 970°C600°C – 650°C930°C – 970°C, Cooling in air  

FORMS OF EN41B ALLOY STEEL (Round section):

DIAMETER-20mm to 455mm.

EN41B Alloy Steel applications:

in Oil and Gas Pipeline, in Chemical Industry, in Plumbing, in Heating, in Power Plant, in Paper & Pulp Industry, in Fabrication Industry, in Food Processing Industry, in Water Supply Systems, in Structural Pipe, in Heat Exchangers, in General purpose applications

TYPES OF OTHER GRADES AVAILABLE :

C45, EN8, EN9, EN19, EN24, EN31, EN36C, EN41B, EN47, EN353, IS2062, 42Crmo4, HCHCR, OHNS, D2, D3, H-11, H-13,M2, M35, M42, M48,1.2714, SKD-11, P20, P20+S, P20+Ni, P20+Ni+HH, SAE 4140, SAE4340, SAE 8620, 16MNCR5, 20MNCR5, C35, C40, C50, C60, CK45, 40C8, 45C8, 55C8, C55MN75, SAE 52100, S40C,S355J2G3.

CITIES IN WHICH WE ARE DEALING:

Uttar Pradesh:

Kanpur,Lucknow,Ghaziabad,Agra,Meerut,Varanasi,Prayagraj,Bareilly,Aligarh,Moradabad,Saharanpur,Gorakhpur,Noida, greater Noida, udham  nagar,Firozabad,Jhansi,Muzaffarnagar,Mathura,Ayodhya,Rampur,Shahjahanpur,FarrukhabadFategarh,Budaun,Maunath,Bhanjan,Hapur,Etawah,Mirzapur,Vindhyachal,Bulandshahr,Sambhal,Amroha,Hardoi,Fatehpur,Raebareli,Orai,Sitapur,Bahraich,Modinagar,Unnao,Jaunpur,Lakhimpur,Hathras,Banda,Pilibhit,Barabanki,Khurja,Gonda,Mainpuri,Lalitpur,Etah,Deoria,Badaun,Ghazipur,Sultanpur,Azamgarh,Bijnor,Sahaswan,Basti,Chandausi,Akbarpur,Ballia,Tanda,Shikohabad,Shamli,Awagarh,Kasganj.

Rajasthan:

Jaipur, Jodhpur, Kota, Bikaner ,Bhiwadi  ,Ajmer ,Udaipur ,Bhilwara ,Alwar ,Bharatpur,bharan ,Sri Ganganagar ,Sikar ,Pali ,Tonk ,Kishangarh ,Beawar ,Hanumangarh ,Dhaulpur ,Gangapur City, Sawai Madhopur ,Churu ,Jhunjhunu ,Baran ,Chittaurgarh ,Makrana ,Nagaur ,Banswara ,Dungarpur, pratapgarh

Haryana:

Faridabad (New Township) , Gurgaon , Panipat, Yamunanagar, Rohtak, Hisar, Karnal, Sonipat, Panchkula (Urban Estate), Ambala Sadar, Bhiwani, Ambala, Sirsa, Bahadurgarh, Jind, Thanesar, Kaithal, Rewari, Palwal, Hansi, Narnaul, Fatehabad, Gohana, Tohana, Narwana.

For more details:

Phone no-8076217931

Office Address:             

Alloy Carbon Steel

693 Saini Vihar, Mundka, Delhi 110041

Email id-sumit_garg_1@yahoo.co.in

Website Link-http://alloycarbonsteel.com/

[alloycarbonsteel]

EN24 ALLOY STEEL

EN24 ALLOY STEEL :

EN24 is an excessive strength metallic alloy that is additionally known as 4340. It is furnished, tempered, and hardened. It is popular and extensively used due to its tremendous strength in numerous additives, which includes bolts, gears, and studs. Other grades can be surfaced-hardened to create parts with stepped forward water resistance through nitriding or induction.

Chemical composition of EN24:Element  Carbon  Silicon  Manganese  Phosphorus  Sulphur  Chromium  Molybdenum  Nickle  Content (%)  0.36-0.44  0.10-0.35  0.45-0.70  0.035 Max  0.040 Max  1.00-1.40  0.20-0.35  1.30-1.70  

EN24 Physical Properties:

Physical PropertiesMetricUS/ImperialDensity7.80 g/cc0.282 lb/in³

Hardness-248 to 302HRC

 Forging Properties of EN24:

Preheat carefully, then raise temperature to 1000-1100°C for forging. Do now not forge the steel beneath 850-1100°C. After forging cool slowly preferably in a furnace.

Forms of EN19 Steel Pipes: 

Outer Diameter(OD)-Upto 550mm

Inner Diameter(ID)-upto 400mm

Length-Upto 6000mm length

Forms of EN24 alloy Flat bar steel:

EN24 Flat

EN24T flat sections can be produced via go slicing from massive cast machined billet.

Flat bar/Rolled flat bar-thickness upto 50mm width upto 455mm

Forged flat bar-thickness upto 305mm and width upto 455mm

Forms of EN24 alloy steel Round bar:

EN24 Round Bar

EN24 is produced in a massive variety of round bar sizes starting at 6.35mm up to about 1 metre in diameter.

Rolled round bar – diameter 16mm to 250mm

Heavy forged round – diameter 200mm to 450mm

Heavy machined round – diameter 260mm to 620mm

Forms of En24 alloy steel plates:

Width upto 2000mm

Length upto 6300mm

Thickness upto 120mm

EN24 applications:

When used for programs in its heat treated circumstance EN24 combines excessive tensile strength with shock resistance. It is simple to work and may be forged or stamped with out trouble. EN24 is machinable inside the annealed circumstance or when hardened and tempered.

• Power transmission gears and other gears requiring maximum hardness.

• Bolts, screwed components, stub axles, swivel fingers required very tough.

• Structural additives with top high tensile wishes.

• Cranks, axles, propellor and gearbox shafts requiring good high tensile residences.

• Connecting rods, unique cranks and different elements required to be stiff and but preserve a excessive degree of toughness.

• Plastics and rubber moulding industry parts for moulds, hob preserving earrings, stop pins.

TYPES OF OTHER GRADES AVAILABLE :

C45, EN8, EN9, EN19, EN24, EN31,EN36C, EN41B, EN47, EN353, IS2062, 42Crmo4, HCHCR, OHNS, D2, D3, H-11, H-13,M2, M35, M42, M48,1.2714, SKD-11, P20, P20+S, P20+Ni, P20+Ni+HH, SAE 4140, SAE4340, SAE 8620, 16MNCR5, 20MNCR5, C35, C40, C50, C60, CK45, 40C8, 45C8, 55C8, C55MN75, SAE 52100, S40C,S355J2G3.

CITIES IN WHICH WE ARE DEALING:

Uttar Pradesh:

Kanpur,Lucknow,Ghaziabad,Agra,Meerut,Varanasi,Prayagraj,Bareilly,Aligarh,Moradabad,Saharanpur,Gorakhpur,Noida, greater Noida, udham  nagar,Firozabad,Jhansi,Muzaffarnagar,Mathura,Ayodhya,Rampur,Shahjahanpur,FarrukhabadFategarh,Budaun,Maunath,Bhanjan,Hapur,Etawah,Mirzapur,Vindhyachal,Bulandshahr,Sambhal,Amroha,Hardoi,Fatehpur,Raebareli,Orai,Sitapur,Bahraich,Modinagar,Unnao,Jaunpur,Lakhimpur,Hathras,Banda,Pilibhit,Barabanki,Khurja,Gonda,Mainpuri,Lalitpur,Etah,Deoria,Badaun,Ghazipur,Sultanpur,Azamgarh,Bijnor,Sahaswan,Basti,Chandausi,Akbarpur,Ballia,Tanda,Shikohabad,Shamli,Awagarh,Kasganj.

Rajasthan:

Jaipur, Jodhpur, Kota ,Bikaner ,Bhiwadi  ,Ajmer ,Udaipur ,Bhilwara ,Alwar ,Bharatpur,bharan ,Sri Ganganagar ,Sikar ,Pali ,Tonk ,Kishangarh ,Beawar ,Hanumangarh ,Dhaulpur ,Gangapur City, Sawai Madhopur ,Churu ,Jhunjhunu ,Baran ,Chittaurgarh ,Makrana ,Nagaur ,Banswara ,Dungarpur, pratapgarh

Haryana:

Faridabad (New Township) ,Gurgaon , Panipat, Yamunanagar, Rohtak, Hisar, Karnal, Sonipat, Panchkula (Urban Estate), Ambala Sadar, Bhiwani, Ambala, Sirsa, Bahadurgarh, Jind, Thanesar, Kaithal, Rewari, Palwal, Hansi, Narnaul, Fatehabad, Gohana, Tohana, Narwana.

For more details:

Phone no-8076217931

Office Address:             

Alloy Carbon Steel

693 Saini Vihar, Mundka, Delhi 110041

Email id-sumit_garg_1@yahoo.co.in

Website Link-http://alloycarbonsteel.com/

[alloycarbonsteel]

Alloy steel EN19

EN19 is a high best alloy metal with tensile power. With a aggregate of top ductility and surprise resistance, EN19 is appropriate for applications with very excessive loading which includes engine gear containers.

What is EN19 metal referred to as?

EN19 additionally known as 708M40 / 709M40 and AISI 4140 comes dealt with inside the annealed as rolled or may be provided within the circumstance. We offer EN19  a high quality alloy metallic with desirable tensile energy. We can deliver in diameters, squares, and residences from inventory.

Heat Treatment :

Steel is heated at 845°C followed via quenching in oil. Before hardening, it can be normalized by its way of heating at 913°C for a long time period of time to be observed by air cooling.

Hardening:

En19 alloy metal can be hardened by means of bloodless working or heating and quenching.

 Forging Properties of  EN19 :

 En19 steel is forged at around 926°C to 1205°C.

Forms of EN19 Steel Pipes: 

Outer Diameter(OD)-Upto 550mm

Inner Diameter(ID)-upto 400mm

Length-Upto 6000mm length

Forms of EN19 alloy Flat bar steel:

Flat bar/Rolled flat bar-thickness upto 50mm width upto 455mm

Forged flat bar-thickness upto 305mm and width upto 455mm

Forms of EN19 alloy steel Round bar:

Rolled round bar – diameter 16mm to 250mm

Heavy forged round – diameter 200mm to 450mm

Heavy machined round – diameter 260mm to 620mm

Forms of En19 alloy steel plates/ 42CrMo4 alloy steel plates:

Width upto 2000mm

Length upto 6300mm

Thickness upto 120mm

Applications of EN19 Alloy steel:

Gears

Shafts

Pinions

Spindles

Oil and gas industries.

TYPES OF OTHER GRADES AVAILABLE :

C45, EN8, EN9, EN19, EN24, EN31,EN36C, EN41B, EN47, EN353, IS2062, 42Crmo4, HCHCR, OHNS, D2, D3, H-11, H-13,M2, M35, M42, M48,1.2714, SKD-11, P20, P20+S, P20+Ni, P20+Ni+HH, SAE 4140, SAE4340, SAE 8620, 16MNCR5, 20MNCR5, C35, C40, C50, C60, CK45, 40C8, 45C8, 55C8, C55MN75, SAE 52100, S40C,S355J2G3.

CITIES IN WHICH WE ARE DEALING:

Uttar Pradesh:

Kanpur,Lucknow,Ghaziabad,Agra,Meerut,Varanasi,Prayagraj,Bareilly,Aligarh,Moradabad,Saharanpur,Gorakhpur,Noida, greater Noida, udham  nagar,Firozabad,Jhansi,Muzaffarnagar,Mathura,Ayodhya,Rampur,Shahjahanpur,FarrukhabadFategarh,Budaun,Maunath,Bhanjan,Hapur,Etawah,Mirzapur,Vindhyachal,Bulandshahr,Sambhal,Amroha,Hardoi,Fatehpur,Raebareli,Orai,Sitapur,Bahraich,Modinagar,Unnao,Jaunpur,Lakhimpur,Hathras,Banda,Pilibhit,Barabanki,Khurja,Gonda,Mainpuri,Lalitpur,Etah,Deoria,Badaun,Ghazipur,Sultanpur,Azamgarh,Bijnor,Sahaswan,Basti,Chandausi,Akbarpur,Ballia,Tanda,Shikohabad,Shamli,Awagarh,Kasganj.

Rajasthan:

Jaipur, Jodhpur, Kota ,Bikaner ,Bhiwadi  ,Ajmer ,Udaipur ,Bhilwara ,Alwar ,Bharatpur,bharan ,Sri Ganganagar ,Sikar ,Pali ,Tonk ,Kishangarh ,Beawar ,Hanumangarh ,Dhaulpur ,Gangapur City, Sawai Madhopur ,Churu ,Jhunjhunu ,Baran ,Chittaurgarh ,Makrana ,Nagaur ,Banswara ,Dungarpur, pratapgarh

Haryana:

Faridabad (New Township) ,Gurgaon , Panipat, Yamunanagar, Rohtak, Hisar, Karnal, Sonipat, Panchkula (Urban Estate), Ambala Sadar, Bhiwani, Ambala, Sirsa, Bahadurgarh, Jind, Thanesar, Kaithal, Rewari, Palwal, Hansi, Narnaul, Fatehabad, Gohana, Tohana, Narwana.

For more details:

Phone no-8076217931

Office Address:             

Alloy Carbon Steel

693 Saini Vihar, Mundka, Delhi 110041

Email id-sumit_garg_1@yahoo.co.in

Website Link-http://alloycarbonsteel.com/

[alloycarbonsteel]

EN9/C55 carbon steel

EN9 carbon steel is a medium carbon metallic grade generally furnished within the as-rolled and forged circumstance. It can be flame or induction hardened to provide a excessive floor hardness with awesome put on resistance for a carbon metallic grade.

CONTACT DETAILS: PHONE N0-8076217931 EMAIL ID-sumit_garg_1@yahoo.co.in