alloycarbonsteel - Tumblr blog

[alloycarbonsteel]

Alloy Carbon Steel

Alloy Carbon Steel are stockiest; supplier and manufactures of carbon steel, alloy steel, tool steel, mold steel and for more info call us at: 8076217931

[alloycarbonsteel]

C45/EN8/EN8D/EN9 Steel in Bangalore:

ALLOY CARBON STEEL are stockiest; supplier and manufactures of carbon steel, alloy steel, tool steel, mold steel. We have experience of more than 50 years in iron and steel industries.

Alloy Carbon Steel are committed to provide best and varieties of products at reasonable, best price to customers. To know more about our products just click and give us chance to serve you and fulfil your requirements.

The particular heat treatment and processing circumstances that materials like EN8, EN8D, and C45 go through might affect their hardness. I can, however, give you a broad picture of their usual hardness values as follows :

EN8: When it is in its normalized state, its Brinell Hardness (HB) is normally between 200 and 250. Hardness can increase dramatically after quenching and tempering, frequently reaching levels between 30 and 40 HRC (Rockwell Hardness C-scale).

EN8D: Essentially, EN8D is an EN8 variation with a little higher carbon content. Generally speaking, EN8D has a harder texture than EN8. In its state of normalcy: It may have a hardness of 200–250 HB, similar to EN8.

C45: In its normalised state, C45 typically has a hardness of 170 to 210 HB. Following quenching and tempering, the hardness can rise significantly and is typically in the range of 55 to 58 HRC.

EN9: EN 9 steel is a medium carbon steel grade used in general engineering purposes. Its hardness can vary based on the heat treatment it has undergone and other factors. The hardness of EN 9 steel can typically range from around 180 to 280 on the Vickers hardness scale (HV).

Following heat treatment, the hardness can reach hardness values of between 30 and 45 HRC, a significant increase in hardness.

Properties of C45:

Strength: Good hardness and tensile strength.

Machinability: Excellent machinabilitywhenhot rolled or in its normalized state.

Weldability: It is weldable, however care must be taken to prevent cold cracking.

Properties of EN8:

Strength: Excellent toughness and tensile strength.

Machinability: From decent to excellent.

Weldability: It is weldable, however care must be taken to prevent cold cracking.

Properties of EN8D:

Strength: Greater hardness and tensile strength than EN8.

Machinability: Excellent machinability is a must.

Weldability: In general, it can be welded, but care must be given to guarantee the required mechanical qualities and prevent cold cracking.

Properties of EN9:

Strength: The yield strength of EN 9 steel is usually between 350 MPa to 600 MPa when in the normalized condition. Again, the specific value can depend on various factors.

Machinability: EN 9 steel, when in the normalized or annealed condition, has good machinability. However, it’s essential to use appropriate speeds and feeds to achieve desired results.

Weldability: EN 9 can be welded using standard methods. Preheating and post-weld heat treatment might be necessary for specific applications to minimize the risk of cracking and to achieve desired mechanical properties in the weld region.

Here are some common uses of these materials:

C45: C45 steel is frequently used for parts and components, such as gears, shafts, axles, and bolts, that need to be moderately strong and robust.

EN8: EN8 steel is frequently used in general engineering applications, such as automobile and construction equipment parts, machinery, and machinery.

EN8D: Crane wheels, machine parts, gears, shafts, axles, bolts and studs are applications of en8d steel.

EN9: EN9 is often used in the manufacture of various engineering components such as shafts, gears, studs, bolts, and spindles due to its good strength and toughness.

TYPES OF OTHER GRADES AVAILABLE :

C45, EN8, EN9, EN19, EN24, EN31,EN36C, EN41B, EN47, EN353, IS2062, 42Crmo4, HCHCR, OHNS, D2, D3, H-11, H-13,M2, M35, M42, M48,1.2714, SKD-11, P20, P20+S, P20+Ni, P20+Ni+HH, SAE 4140, SAE4340, SAE 8620, 16MNCR5, 20MNCR5, C35, C40, C50, C60, CK45, 40C8, 45C8, 55C8, C55MN75, SAE 52100, S40C,S355J2G3.

AREA OF SUPPLYING:

Uttar Pradesh:

Kanpur,Lucknow,Ghaziabad,Agra,Meerut,Varanasi,Prayagraj,Bareilly,Aligarh,Moradabad,Saharanpur,Gorakhpur,Noida, greater Noida, udham nagar,Firozabad,Jhansi,Muzaffarnagar,Mathura,Ayodhya,Rampur,Shahjahanpur,FarrukhabadFategarh,Budaun,Maunath,Bhanjan,Hapur,Etawah,Mirzapur,Vindhyachal,Bulandshahr,Sambhal,Amroha,Hardoi,Fatehpur,Raebareli,Orai,Sitapur,Bahraich,Modinagar,Unnao,Jaunpur,Lakhimpur,Hathras,Banda,Pilibhit,Barabanki,Khurja,Gonda,Mainpuri,Lalitpur,Etah,Deoria,Badaun,Ghazipur,Sultanpur,Azamgarh,Bijnor,Sahaswan,Basti,Chandausi,Akbarpur,Ballia,Tanda,Shikohabad,Shamli,Awagarh,Kasganj.

Rajasthan:

Jaipur, Jodhpur, Kota ,Bikaner ,Bhiwadi ,Ajmer ,Udaipur ,Bhilwara ,Alwar ,Bharatpur,bharan ,Sri Ganganagar ,Sikar ,Pali ,Tonk ,Kishangarh ,Beawar ,Hanumangarh ,Dhaulpur ,Gangapur City, SawaiMadhopur ,Churu ,Jhunjhunu ,Baran ,Chittaurgarh ,Makrana ,Nagaur ,Banswara ,Dungarpur, pratapgarh

Haryana:

Faridabad (New Township) ,Gurgaon , Panipat, Yamunanagar, Rohtak, Hisar, Karnal, Sonipat, Panchkula (Urban Estate), Ambala Sadar, Bhiwani, Ambala, Sirsa, Bahadurgarh, Jind, Thanesar, Kaithal, Rewari, Palwal, Hansi, Narnaul, Fatehabad, Gohana, Tohana, Narwana.

Other Region: Tamil Nadu, Chennai, Pune, Maharashtra, Nagpur, Bangalore, West-Bengal, Kanyakumari, Odhissa

For more details:

Phone no-8076217931

Office Address:

Alloy Carbon Steel

693 Saini Vihar, Mundka, Delhi 110041

Email id-sumit_garg_1@yahoo.co.in

Website Link-http://alloycarbonsteel.com/

[alloycarbonsteel]

C45/EN8/EN19 Plates in Tamil Nadu/Chennai:

ALLOY CARBON STEEL are stockiest; supplier and manufactures of carbon steel, alloy steel, tool steel, mold steel. We have experience of more than 50 years in iron and steel industries.

C45/EN8/EN19 Plates & forged shaft:

Carbon steel, which provides exceptional strength, hardness, and wear resistance, is used to make C45/EN8/EN19 Plates. Numerous industries, notably the automotive, manufacturing, and mechanical sectors, heavily rely on these plates. Are you trying to find en8 or en19 plates in Tamil Nadu/Chennai? Alloy carbon steel offers a wide selection of superior quality plates to meet your needs.

Several important aspects are provided by the C45/EN8/EN19 Plates:

High Tensile Strength and Toughness: These plates are ideal for applications requiring strong, long-lasting components because of their high tensile strength and toughness. Whether you require en8 or en19 plates in Tamil Nadu, these plates are dependable in harsh circumstances and can support large loads.

C45: The normal hardness and tensile strength ranges for C45 steel are 170–210 HB (Rockwell C) and 570–700 MPa, respectively.

EN8: The normal ranges for hardness and tensile strength of EN8 steel are 150–250 HB and 500–700 MPa, respectively.

EN19: It is a high tensile steel that is primarily used for applications like gears, shafts, studs, and bolts, among others. It is a grade of steel specified in the British standard BS 970–1955.

Chemical Composition of EN19:

Carbon ©: 0.35% — 0.45%

Silicon (Si): 0.10% — 0.40%

Manganese (Mn): 0.60% — 1.00%

Chromium (Cr): 0.90% — 1.50%

Molybdenum (Mo): 0.15% — 0.30%

Properties:

Strength: EN19 has good ductility and a high tensile strength, particularly when properly heated.

Machinability: It can be machined rather well, however heat treatment after welding may be necessary.

Weldability: EN19 can be welded, however care must be taken; pre- and post-weld heat treatments are frequently required.

Chemical Composition of C45:

Carbon ©: 0.42% — 0.50%

Silicon (Si): 0.40% max

Manganese (Mn): 0.50% — 0.80%

Phosphorus (P): 0.025% max

Sulfur (S): 0.025% max

Properties:

Strength: C45 has a strong hardness and tensile strength.

Machinability: Excellent machinability is exhibited by it when it is in its normalised or hot rolled state.

Weldability: C45 can be welded, however care must be given to prevent cold cracking.

Chemical Composition of EN8:

Carbon ©: 0.36% — 0.44%

Silicon (Si): 0.10% — 0.40%

Manganese (Mn): 0.60% — 1.00%

Phosphorus (P): 0.050% max

Sulfur (S): 0.050% max

Properties:

Strength: EN8 has a strong toughness and tensile strength.

Machinability: Its machinability ranges from fair to good.

Weldability: Although EN8 can be welded, care must be taken to prevent cold cracking.

Application of C45, EN8, EN19 alloy steel:

C45: C45 steel is frequently used for Automotive parts and components, such as gears, forged shafts, backup roll, axles, and bolts, that must be reasonably resilient and strong.

EN8: EN8 steel is frequently used in general engineering applications, such as automobile and construction equipment parts, backup roll ,machinery, and machinery.

EN19: It is appropriate for a variety of applications where high strength and durability are needed because of its high tensile strength and toughness following heat treatment. This covers high-wear items including gears, forged shafts, backup roll and axles as well as structural elements used in the automotive and manufacturing industries.

TYPES OF OTHER GRADES AVAILABLE :

C45, EN8, EN9, EN19, EN24, EN31,EN36C, EN41B, EN47, EN353, IS2062, 42Crmo4, HCHCR, OHNS, D2, D3, H-11, H-13,M2, M35, M42, M48,1.2714, SKD-11, P20, P20+S, P20+Ni, P20+Ni+HH, SAE 4140, SAE4340, SAE 8620, 16MNCR5, 20MNCR5, C35, C40, C50, C60, CK45, 40C8, 45C8, 55C8, C55MN75, SAE 52100, S40C,S355J2G3.

AREA OF SUPPLYING:

Uttar Pradesh:

Kanpur,Lucknow,Ghaziabad,Agra,Meerut,Varanasi,Prayagraj,Bareilly,Aligarh,Moradabad,Saharanpur,Gorakhpur,Noida, greater Noida, udham nagar,Firozabad,Jhansi,Muzaffarnagar,Mathura,Ayodhya,Rampur,Shahjahanpur,FarrukhabadFategarh,Budaun,Maunath,Bhanjan,Hapur,Etawah,Mirzapur,Vindhyachal,Bulandshahr,Sambhal,Amroha,Hardoi,Fatehpur,Raebareli,Orai,Sitapur,Bahraich,Modinagar,Unnao,Jaunpur,Lakhimpur,Hathras,Banda,Pilibhit,Barabanki,Khurja,Gonda,Mainpuri,Lalitpur,Etah,Deoria,Badaun,Ghazipur,Sultanpur,Azamgarh,Bijnor,Sahaswan,Basti,Chandausi,Akbarpur,Ballia,Tanda,Shikohabad,Shamli,Awagarh,Kasganj.

Rajasthan:

Jaipur, Jodhpur, Kota ,Bikaner ,Bhiwadi ,Ajmer ,Udaipur ,Bhilwara ,Alwar ,Bharatpur,bharan ,Sri Ganganagar ,Sikar ,Pali ,Tonk ,Kishangarh ,Beawar ,Hanumangarh ,Dhaulpur ,Gangapur City, SawaiMadhopur ,Churu ,Jhunjhunu ,Baran ,Chittaurgarh ,Makrana ,Nagaur ,Banswara ,Dungarpur, pratapgarh

Haryana:

Faridabad (New Township) ,Gurgaon , Panipat, Yamunanagar, Rohtak, Hisar, Karnal, Sonipat, Panchkula (Urban Estate), Ambala Sadar, Bhiwani, Ambala, Sirsa, Bahadurgarh, Jind, Thanesar, Kaithal, Rewari, Palwal, Hansi, Narnaul, Fatehabad, Gohana, Tohana, Narwana.

Other Region: Tamil Nadu, Chennai, Pune, Maharashtra, Nagpur, Bangalore, West-Bengal, Kanyakumari, Odhissa

For more details:

Phone no-8076217931

Office Address:

Alloy Carbon Steel

693 Saini Vihar, Mundka, Delhi 110041

Email id-sumit_garg_1@yahoo.co.in

Website Link-http://alloycarbonsteel.com/

[alloycarbonsteel]

Carbon Steel EN8 / C45 / 1045 Plate:

C45:

Carbon ©: 0.42% — 0.50%

Silicon (Si): 0.40% max

Manganese (Mn): 0.50% — 0.80%

Phosphorus (P): 0.025% max

Sulfur (S): 0.025% max

Mechanical Characteristics:

Tensile Strength: Depending on heat treatment, usually between 600 and 800 MPa.

Yield Strength: When heated, it changes.

Hardness: The appropriate amounts of hardness can be attained by heat treatment.

EN8:

Carbon ©: 0.36% — 0.44%

Silicon (Si): 0.10% — 0.40%

Manganese (Mn): 0.60% — 1.00%

Phosphorus (P): 0.050% max

Sulfur (S): 0.050% max

Mechanical Characteristics:

Tensile strength: Depending on heat treatment, usually between 570 and 700 MPa.

Yield Strength: When heated, it changes.

Hardness: The appropriate amounts of hardness can be attained by heat treatment.

AISI 1045:

Carbon ©: 0.43% — 0.50%

Manganese (Mn): 0.60% — 0.90%

Phosphorus (P): 0.040% max

Sulfur (S): 0.050% max

Mechanical Characteristics:

Tensile Strength: Depending on heat treatment, between 565 and 710 MPa.

Yield Strength: When heated, it changes.

Hardness: When normalised or hot rolled, it typically has a Brinell hardness of 170 to 210.

C45: The EN 10083 standard specifies C45 as a medium carbon steel grade. This popular steel grade’s good mix of strength, hardness, and wear resistance make it useful for a variety of applications.

Properties: C45 has excellent strength, weldability, and machinability. Because of its higher carbon content, it has better hardenability, allowing for the desired mechanical qualities to be achieved through quenching and tempering.

Applications: C45 is frequently used in gears, shafts, machinery parts, automotive components, and other applications requiring strength and resistance to wear.

EN8: Similar to C45, EN8 is another medium carbon steel grade that is specified in the EN 10083 standard. Due to its affordable price and well-balanced qualities, this engineering steel is highly sought for.

Properties: EN8 is robust and has strong tensile strength. It can be heat-treated to obtain various strengths and hardness combinations. Its qualities make it appropriate for a wide range of uses.

Applications: Shafts, axles, bolts, gears, and other typical engineering applications are among the uses for EN8. It is selected because of its affordability and adaptability.

AISI 1045 steel: It has a strong mix of strength, hardness, and wear resistance, which makes it useful in many different applications.

Properties: AISI 1045 has good hardness and tensile strength, particularly after applying the right heat treatments. Excellent machinability is exhibited by this steel grade when it is hot rolled or normalized. It is easily machined into a wide range of shapes and forms.

Applications: Parts of machinery, Axles and shafts, Gears, Fasteners and bolts, Automobile parts, Components of general engineering.

EN8 and C45 are two adaptable steel types with comparable qualities and uses. The decision between them is frequently influenced by particular needs, availability, and financial factors.

ALLOY CARBON STEEL are stockiest; supplier and manufactures of carbon steel, alloy steel, tool steel, mold steel. We have experience of more than 50 years in iron and steel industries.

Alloy Carbon Steel are committed to provide best and varieties of products at reasonable, and best price to customers. To know more about our products just click and give us chance to serve you and fulfil your requirements.

TYPES OF OTHER GRADES AVAILABLE :

C45, EN8, EN9, EN19, EN24, EN31,EN36C, EN41B, EN47, EN353, IS2062, 42Crmo4, HCHCR, OHNS, D2, D3, H-11, H-13,M2, M35, M42, M48,1.2714, SKD-11, P20, P20+S, P20+Ni, P20+Ni+HH, SAE 4140, SAE4340, SAE 8620, 16MNCR5, 20MNCR5, C35, C40, C50, C60, CK45, 40C8, 45C8, 55C8, C55MN75, SAE 52100, S40C,S355J2G3.

AREA OF SUPPLYING:

Uttar Pradesh:

Kanpur,Lucknow,Ghaziabad,Agra,Meerut,Varanasi,Prayagraj,Bareilly,Aligarh,Moradabad,Saharanpur,Gorakhpur,Noida, greater Noida, udham nagar,Firozabad,Jhansi,Muzaffarnagar,Mathura,Ayodhya,Rampur,Shahjahanpur,FarrukhabadFategarh,Budaun,Maunath,Bhanjan,Hapur,Etawah,Mirzapur,Vindhyachal,Bulandshahr,Sambhal,Amroha,Hardoi,Fatehpur,Raebareli,Orai,Sitapur,Bahraich,Modinagar,Unnao,Jaunpur,Lakhimpur,Hathras,Banda,Pilibhit,Barabanki,Khurja,Gonda,Mainpuri,Lalitpur,Etah,Deoria,Badaun,Ghazipur,Sultanpur,Azamgarh,Bijnor,Sahaswan,Basti,Chandausi,Akbarpur,Ballia,Tanda,Shikohabad,Shamli,Awagarh,Kasganj.

Rajasthan:

Jaipur, Jodhpur, Kota ,Bikaner ,Bhiwadi ,Ajmer ,Udaipur ,Bhilwara ,Alwar ,Bharatpur,bharan ,Sri Ganganagar ,Sikar ,Pali ,Tonk ,Kishangarh ,Beawar ,Hanumangarh ,Dhaulpur ,Gangapur City, SawaiMadhopur ,Churu ,Jhunjhunu ,Baran ,Chittaurgarh ,Makrana ,Nagaur ,Banswara ,Dungarpur, pratapgarh

Haryana:

Faridabad (New Township) ,Gurgaon , Panipat, Yamunanagar, Rohtak, Hisar, Karnal, Sonipat, Panchkula (Urban Estate), Ambala Sadar, Bhiwani, Ambala, Sirsa, Bahadurgarh, Jind, Thanesar, Kaithal, Rewari, Palwal, Hansi, Narnaul, Fatehabad, Gohana, Tohana, Narwana.

Other Region:

Tamil Nadu, Chennai, Pune, Maharashtra, Nagpur, Bangalore, West-Bengal, Kanyakumari, Odhissa

For more details:

Phone no-8076217931

Office Address:

Alloy Carbon Steel

693 Saini Vihar, Mundka, Delhi 110041

Email id-sumit_garg_1@yahoo.co.in

Website Link-http://alloycarbonsteel.com/

[alloycarbonsteel]

ALLOY CARBON STEEL are stockiest; supplier and manufactures of carbon steel, alloy steel, tool steel, mold steel. We have experience of more than 50 years in iron and steel industries.

Alloy Carbon Steel are committed to provide best and varieties of products at reasonable, best price to customers. To know more about our products just click and give us chance to serve you and fulfill your requirements.

K310 Chemical composition:

CARBON C %SILICON Si%MANGANESE Mn%CHROMIUM Cr%MOLYBDENUM Mo%VANADIUM V%SULPHUR S%PHOSPHORUS P%K3100.83–0.900.15–0.350.30–0.451.60–1.900.20–0.350.05–0.15≤ 0.035%≤ 0.035%

Dimensions of K310 cold work steel:

Round bar diameter: 100mm to 650mm

Length upto 6m

Block/ flat/ plate:

Thickness : 50mm to 400mm

Width : 200mm to 600mm

Length : Upto 3m

Applications of K310:

• Food Processing;

• Cryogenic Components

• Fluidized Bed Furnaces: grids, piping, wind boxes, and coal combustors; • Furnaces: burners, doors, fans, piping, and recuperators

• Power Generation: coal gasifier internals, pulverised coal burners, tube hangers; Ore Processing/Steel Plants: smelter and steel melting equipment, continuous casting equipment; Petroleum Refining: burners, burner shields, feeding and discharging systems, wind boxes; Sintering/Cement Plants: burners, burner shields, feeding and discharging systems, wind boxes.

• Thermal processing: annealing burner grids, doors and box coverings.

AREA OF SUPPLYING:

Uttar Pradesh:

Kanpur, Lucknow, Ghaziabad, Agra, Meerut, Varanasi, Prayagraj, Bareilly, Aligarh, Moradabad, Saharanpur, Gorakhpur, Noida, greater Noida, udham nagar, Firozabad, Jhansi, Muzaffarnagar, Mathura, Ayodhya, Rampur, Shahjahanpur, Farrukhabad Fategarh, Budaun, Maunath,Bhanjan, Hapur, Etawah, Mirzapur, Vindhyachal, Bulandshahr, Sambhal, Amroha, Hardoi, Fatehpur, Raebareli, Orai, Sitapur, Bahraich, Modinagar,Unnao, Jaunpur, Lakhimpur, Hathras, Banda, Pilibhit, Barabanki, Khurja, Gonda, Mainpuri, Lalitpur, Etah, Deoria, Badaun, Ghazipur, Sultanpur, Azamgarh, Bijnor, Sahaswan, Basti, Chandausi, Akbarpur, Ballia, Tanda, Shikohabad, Shamli, Awagarh, Kasganj.

Rajasthan:

Jaipur, Jodhpur, Kota ,Bikaner, Bhiwadi, Ajmer ,Udaipur ,Bhilwara ,Alwar ,Bharatpur, bharan ,Sri Ganganagar ,Sikar ,Pali ,Tonk ,Kishangarh ,Beawar ,Hanumangarh ,Dhaulpur ,Gangapur City, SawaiMadhopur ,Churu ,Jhunjhunu ,Baran ,Chittaurgarh ,Makrana ,Nagaur ,Banswara ,Dungarpur, pratapgarh.

Haryana:

Faridabad (New Township) ,Gurgaon , Panipat, Yamunanagar, Rohtak, Hisar, Karnal, Sonipat, Panchkula (Urban Estate), Ambala Sadar, Bhiwani, Ambala, Sirsa, Bahadurgarh, Jind, Thanesar, Kaithal, Rewari, Palwal, Hansi, Narnaul, Fatehabad, Gohana, Tohana, Narwana.

Other Region: Tamil Nadu, Chennai, Pune, Maharashtra, Nagpur, Bangalore, West-Bengal, Kanya-kumari, Odhissa

For more details:

Phone no-8076217931

Office Address:

Alloy Carbon Steel

693 Saini Vihar, Mundka, Delhi 110041

Email id- sumit_garg_1@yahoo.co.in

Website Link- http://alloycarbonsteel.com/

[alloycarbonsteel]

En8/c45/en9/c55 carbon steel heavy duty forged or machined blocks and rounds in Hyderabad

“EN8/C45/EN9 combined heavy forged” is a steel product that has undergone a rigorous heavy forging process and is a composite or blend of the carbon steel grades EN8, C45, and EN9. For certain purposes, this combination may be engineered to obtain particular mechanical qualities or performance attributes.

Measurement and Specifications:

Round:

Diameter -180mm to 800mm

Lenghth-105mm to 10 meter

Blocks:

Thickness– 80mm to 400mm

Width– 200mm to 800mm

Length– Upto 6 meter

Undoubtedly, medium carbon steels like EN8, EN9, and C45 are frequently utilised in a range of industrial settings. A synopsis of their characteristics is provided below:

EN8 (080M40):

Chemical Composition: Usually consists of silicon (Si), phosphorus (P), sulphur (S), carbon ©, and manganese (Mn). The manufacturer and particular requirements may cause variations in the precise composition.

Mechanical Properties: EN8 exhibits strong wear resistance, hardness, and tensile strength. It can undergo heat treatment to produce a variety of mechanical qualities appropriate for various uses.

Applications: Frequently utilized in parts that need to balance strength with ductility, such as crankshafts, gears, shafts, and machine parts.

EN9 (070M55):

Chemical Composition: Manganese, silicon, sulphur, phosphorus, and a larger carbon content than EN8 make up its chemical composition.

Mechanical Properties: Compared to EN8, EN9 has better hardness, fatigue strength, and wear resistance. It is renowned for being resilient and strong enough to handle demanding applications.

Applications: Suitable for parts that need to be harder and stronger, including crankshafts, gears, and other machine parts that are subjected to high loads and wear.

C45 (1.0503):

Chemical Composition:Carbon, manganese, sulphur, phosphorus, and other trace elements are usually present.

Mechanical Properties: C45 offers a strong balance of durability, toughness, and resistance to wear. It can be heat treated to acquire particular mechanical qualities based on the needs of the application.

Applications: Widely utilized in a variety of industrial applications that call for a sturdy and dependable material, such as machinery parts, automobile components, and construction equipment.

Common Properties:

Carbon Content: The mechanical properties of all three classes of medium carbon steel are affected by the different carbon contents in them.

Heat Treatment: A variety of applications are possible by altering the mechanical characteristics of each grade by heat treatment.

Machinability: Drilling, turning, and milling are among the machining processes that these steels are appropriate for because of their typically good machinability.

Weldability: With the right techniques and safety measures, they can be welded without breaking or distorting.

Corrosion Resistance: These steels can be coated, plated, or treated in other ways to prevent corrosion, even if they are not stainless steel.

TYPES OF OTHER GRADES AVAILABLE :

C45, EN8, EN9, EN19, EN24, EN31,EN36C, EN41B, EN47, EN353, IS2062, 42Crmo4, HCHCR, OHNS, D2, D3, H-11, H-13,M2, M35, M42, M48,1.2714, SKD-11, P20, P20+S, P20+Ni, P20+Ni+HH, SAE 4140, SAE4340, SAE 8620, 16MNCR5, 20MNCR5, C35, C40, C50, C60, CK45, 40C8, 45C8, 55C8, C55MN75, SAE 52100, S40C,S355J2G3.

AREA OF SUPPLYING:

Uttar Pradesh:

Kanpur,Lucknow,Ghaziabad,Agra,Meerut,Varanasi,Prayagraj,Bareilly,Aligarh,Moradabad,Saharanpur,Gorakhpur,Noida, greater Noida, udham nagar,Firozabad,Jhansi,Muzaffarnagar,Mathura,Ayodhya,Rampur,Shahjahanpur,FarrukhabadFategarh,Budaun,Maunath,Bhanjan,Hapur,Etawah,Mirzapur,Vindhyachal,Bulandshahr,Sambhal,Amroha,Hardoi,Fatehpur,Raebareli,Orai,Sitapur,Bahraich,Modinagar,Unnao,Jaunpur,Lakhimpur,Hathras,Banda,Pilibhit,Barabanki,Khurja,Gonda,Mainpuri,Lalitpur,Etah,Deoria,Badaun,Ghazipur,Sultanpur,Azamgarh,Bijnor,Sahaswan,Basti,Chandausi,Akbarpur,Ballia,Tanda,Shikohabad,Shamli,Awagarh,Kasganj.

Rajasthan:

Jaipur, Jodhpur, Kota ,Bikaner ,Bhiwadi ,Ajmer ,Udaipur ,Bhilwara ,Alwar ,Bharatpur,bharan ,Sri Ganganagar ,Sikar ,Pali ,Tonk ,Kishangarh ,Beawar ,Hanumangarh ,Dhaulpur ,Gangapur City, Sawai Madhopur ,Churu ,Jhunjhunu ,Baran ,Chittaurgarh ,Makrana ,Nagaur ,Banswara ,Dungarpur, pratapgarh

Haryana:

Faridabad (New Township) ,Gurgaon , Panipat, Yamunanagar, Rohtak, Hisar, Karnal, Sonipat, Panchkula (Urban Estate), Ambala Sadar, Bhiwani, Ambala, Sirsa, Bahadurgarh, Jind, Thanesar, Kaithal, Rewari, Palwal, Hansi, Narnaul, Fatehabad, Gohana, Tohana, Narwana.

Other Region: Tamil Nadu, Chennai, Pune, Maharashtra, Nagpur, Bangalore, West-Bengal, Hyderabad, Kanyakumari, Odhissa

For more details:

Phone no-8076217931

Office Address:

Alloy Carbon Steel

693 Saini Vihar, Mundka, Delhi 110041

Email id-sumit_garg_1@yahoo.co.in

Website Link-http://alloycarbonsteel.com/

[alloycarbonsteel]

EN24 / EN24T ALLOY STEEL IN MAHARASHTRA

Where we use EN24/EN24T Alloy Steel :

Steel Equivalents for EN24:

Numerous nations have been motivated to investigate the potential of high-strength nickel-chromium-molybdenum steels to fulfill their requirements by the widespread use of EN24 alloy steel. The following are some instances of EN24’s worldwide equivalents :

Aerospace 4340, USA.

34CrNiMo6 in Germany.

1.6582 in France and 34NiCrMo8 / 35NCD6 in Sweden.

14.2541 in Spain.

SNCM447, F1.272, S95 / S119 in Japan.

Chemical composition of En24:

Carbon 0.36–0.44%

Chromium 1.00–1.40%

Molybdenum 0.20–0.35%

Nickle 1.30–1.70%

Properties of EN24 Steel :

EN24 exhibits exceptional shock resistance and high tensile strength, especially when it is heat-treated (EN24T). It is an adaptable material that is simple to work, forge, or stamp. EN24 can be machined both when it’s annealed and after it’s hardened and tempered.

Strength and Versatility of EN24 Steel :

EN24 combines great shock resistance with remarkable tensile strength, especially in its heat-treated form (EN24T). It’s an adaptable material that works well for machining, stamping, and forging. EN24’s machinability varies:

EN24 Steel Heat Treatment :

The heat treatments for En24 materials, which include normalizing, hardening, and tempering, are mentioned below.

Hardening: oil quench, 830 to 860 °C (1525–1580 °F),

Temperature range for tempering: 550–660 °C (1020–1220 °F)

Dimensions of En24 Alloy steel :

En24 bright bar:

Diameter 10mm to 18mm

Length upto 3m (meter)

En24 rolled round :

Diameter 20mm to 160mm

Length upto 6m, 9m, 18m (meter)

En24 forged round :

Diameter 170mm to 450mm

Length upto 6m, 9m, 18m (meter)

En24 flat bar and square bar rolled and forged :

Thickness 20mm to 250mm

Width 100 mm to 600mm

Length upto 6m, 9m, 18m (meter)

Typical Applications for EN24 Steel :

Gears for power gearbox and other gears that need to be as hard as possible. Gearbox shafts, propeller shafts, axles, and cranks all need strong, high tensile characteristics. Certain cranks, connecting rods, and other components need to be rigid while maintaining a high level of durability.

TYPES OF OTHER GRADES AVAILABLE :

C45, EN8, EN9, EN19, EN24, EN31,EN36C, EN41B, EN47, EN353, IS2062, 42Crmo4, HCHCR, OHNS, D2, D3, H-11, H-13,M2, M35, M42, M48,1.2714, SKD-11, P20, P20+S, P20+Ni, P20+Ni+HH, SAE 4140, SAE4340, SAE 8620, 16MNCR5, 20MNCR5, C35, C40, C50, C60, CK45, 40C8, 45C8, 55C8, C55MN75, SAE 52100, S40C,S355J2G3.

AREA OF SUPPLYING:

Uttar Pradesh:

Kanpur, Lucknow, Ghaziabad, Agra, Meerut, Varanasi, Prayagraj, Bareilly, Aligarh, Moradabad, Saharanpur, Gorakhpur, Noida, greater Noida, udham nagar, Firozabad, Jhansi, Muzaffarnagar, Mathura, Ayodhya, Rampur, Shahjahanpur, Farrukhabad Fategarh, Budaun, Maunath,Bhanjan, Hapur, Etawah, Mirzapur, Vindhyachal, Bulandshahr, Sambhal, Amroha, Hardoi, Fatehpur, Raebareli, Orai, Sitapur, Bahraich, Modinagar,Unnao, Jaunpur, Lakhimpur, Hathras, Banda, Pilibhit, Barabanki, Khurja, Gonda, Mainpuri, Lalitpur, Etah, Deoria, Badaun, Ghazipur, Sultanpur, Azamgarh, Bijnor, Sahaswan, Basti, Chandausi, Akbarpur, Ballia, Tanda, Shikohabad, Shamli, Awagarh, Kasganj.

Rajasthan:

Jaipur, Jodhpur, Kota ,Bikaner, Bhiwadi, Ajmer ,Udaipur ,Bhilwara ,Alwar ,Bharatpur, bharan ,Sri Ganganagar ,Sikar ,Pali ,Tonk ,Kishangarh ,Beawar ,Hanumangarh ,Dhaulpur ,Gangapur City, SawaiMadhopur ,Churu ,Jhunjhunu ,Baran ,Chittaurgarh ,Makrana ,Nagaur ,Banswara ,Dungarpur, pratapgarh.

Haryana:

Faridabad (New Township) ,Gurgaon , Panipat, Yamunanagar, Rohtak, Hisar, Karnal, Sonipat, Panchkula (Urban Estate), Ambala Sadar, Bhiwani, Ambala, Sirsa, Bahadurgarh, Jind, Thanesar, Kaithal, Rewari, Palwal, Hansi, Narnaul, Fatehabad, Gohana, Tohana, Narwana.

Other Region: Tamil Nadu, Chennai, Pune, Maharashtra, Nagpur, Bangalore, West-Bengal, Kanya-kumari, Odhissa

For more details:

Phone no-8076217931

Office Address:

Alloy Carbon Steel

693 Saini Vihar, Mundka, Delhi 110041

Email id-sumit_garg_1@yahoo.co.in

Website Link-http://alloycarbonsteel.com/

[alloycarbonsteel]

DB6 – Die block steel/ 1.2714

DB6 is especially recommendable for Close Die Forgings due to its traits of high wear-resistance, greater durability,high hardness that’s accomplished with Cr-Ni-Mo-V high graded alloys.For more details:Phone no-8076217931Office Address:Alloy Carbon Steels 693 Saini Vihar, Mundka,Delhi 110041 Email id-sumit_garg_1@yahoo.co.in,Website Link-https://www.alloycarbonsteel.com/db6-die-block-steel-1-2714/

[alloycarbonsteel]

D2 Steel(1.2601, 1.2379)-Cold Die Steel

Die Steel is a high carbon Alloy steel that achieves a high degree of hardness with compressive strength and abrasion resistance. The Die steel is used as a standard material for dies and cutting elements.For more details: Phone no-8076217931 Office Address:       Alloy Carbon Steels 693 Saini Vihar, Mundka, Delhi 110041 Email id-sumit_garg_1@yahoo.co.in,website link-https://www.alloycarbonsteel.com/d2-steel1-2601-1-2379-cold-die-steel/

[alloycarbonsteel]

HCHCR-D3 DIE STEEL

D3 is an excessive carbon chromium metal stated for its resistance to abrasion. It offers a measure of corrosion resistance while polished.For more details: Phone no-8076217931 Office Address:Alloy Carbon Steels 693 Saini Vihar, Mundka, Delhi 110041 Email id-sumit_garg_1@yahoo.co.in, website link-https://www.alloycarbonsteel.com/hchcr-d3/

[alloycarbonsteel]

HOT DIE STEEL(H-13)

H13 can also be utilized in clear paintings applications because of its general hardness and longevity.For more details: Phone no-8076217931 Office Address:Alloy Carbon Steels 693 Saini Vihar, Mundka, Delhi 110041 Email id-sumit_garg_1@yahoo.co.in, website link-https://www.alloycarbonsteel.com/hot-die-steelh-13/

[alloycarbonsteel]

M35- Molybdenum high speed tool steel

M35- Molybdenum high speed tool steel

M35 is a molybdenum blend Cobalt primarily based high velocity tool metal which is a higher tool steel as compare to HSS M2 due to its capacity of getting five% Cobalt. HSS M35 is manner beforehand effective long lasting long lasting steel which is also typically used worldwide for generation of reducing equipment including drills, reamers, equipment cutters, broaches, die steel.

It has components owning excessive hardness, remarkable cutting residences, crimson hardness making it as one of the first-class exceptional grade device metallic to generate hardness upto 64-66 HRC post warmth remedy. It has a high Tensile power & wear resistance. This grade is best and economically priced making it most usually used high pace metallic grade.

What is the difference between M2 and M35?

M2 is commonly desired for excessive manufacturing system work. M35 is the usual cobalt fabric used for maximum ITM cobalt drill bits. M35 has top notch resistance to abrasion and excellent red-hardness for working tough substances.s

Characteristic of High-Speed Steel M35 :

all-round applicability

good performance

good hot hardness

good machineability.

High Wear Resistance and Cutting Ability

Fine Grain Size and Carbide Particle Size

Eqivalent Grades of M35 High-Speed Steel:CountryGermanUSAJapanStandardDIN EN ISO 4957ASTM A600JIS G4403Grades1.3243/HS6-5-2-5M35SKH65

Chemical composition of M35 tool steel :Element   Content (%)C0.93Cr4.2Co4.9Fe76.52Mo5Si0.3W6.25V1.9

Physical Properties of M35 high speed steel:Physical propertiesMetricImperialDensity8.14 g/cm30.294 lb/in3

Heat treatment of M35 high speed steel:ANNEALINGPREHEATAUSTENITIZINGQUENCHTEMPERINGTempTemp( °C)Temp( °C)Temp( °C)Temp( °C)860-880℃,400-500℃1180-1220℃   salt bathtub540-560℃

Applications of M35 tool Steel:

Heavy responsibility milling cutters, broaches, reamers, slicing tools, shaper cutters & rotary shave cutters for machining difficult materials, socket head & hole punching dies for generating nuts & faucet drills. Die blocks, broaching equipment, cold extrusion rams, tools difficulty to considerable mechanical stresses. Heavy roughing work, machining excessive tensile steels, difficult to system forged metallic, gray forged iron, kick back castings NF metals & non-metallic fabric. Turning, planning & shaping tool, tough milling cutters. End mills, hobs, shaper cutters, cold forming tools, stamping & punching tools, cutting gear, working rolls for cluster rolling stand.

TYPES OF OTHER GRADES AVAILABLE :

C45, EN8, EN9, EN19, EN24, EN31, EN36C, EN41B, EN47, EN353, IS2062, 42Crmo4, HCHCR, OHNS, D2, D3, H-11, H-13,M2, M35, M42, M48,1.2714, SKD-11, P20, P20+S, P20+Ni, P20+Ni+HH, SAE 4140, SAE4340, SAE 8620, 16MNCR5, 20MNCR5, C35, C40, C50, C60, CK45, 40C8, 45C8, 55C8, C55MN75, SAE 52100, S40C,S355J2G3.

CITIES IN WHICH WE ARE DEALING:

Uttar Pradesh:

Kanpur,Lucknow,Ghaziabad,Agra,Meerut,Varanasi,Prayagraj,Bareilly,Aligarh,Moradabad,Saharanpur,Gorakhpur,Noida, greater Noida, udham  nagar,Firozabad,Jhansi,Muzaffarnagar,Mathura,Ayodhya,Rampur,Shahjahanpur,FarrukhabadFategarh,Budaun,Maunath,Bhanjan,Hapur,Etawah,Mirzapur,Vindhyachal,Bulandshahr,Sambhal,Amroha,Hardoi,Fatehpur,Raebareli,Orai,Sitapur,Bahraich,Modinagar,Unnao,Jaunpur,Lakhimpur,Hathras,Banda,Pilibhit,Barabanki,Khurja,Gonda,Mainpuri,Lalitpur,Etah,Deoria,Badaun,Ghazipur,Sultanpur,Azamgarh,Bijnor,Sahaswan,Basti,Chandausi,Akbarpur,Ballia,Tanda,Shikohabad,Shamli,Awagarh,Kasganj.

Rajasthan:

Jaipur, Jodhpur, Kota, Bikaner ,Bhiwadi  ,Ajmer ,Udaipur ,Bhilwara ,Alwar ,Bharatpur,bharan ,Sri Ganganagar ,Sikar ,Pali ,Tonk ,Kishangarh ,Beawar ,Hanumangarh ,Dhaulpur ,Gangapur City, Sawai Madhopur ,Churu ,Jhunjhunu ,Baran ,Chittaurgarh ,Makrana ,Nagaur ,Banswara ,Dungarpur, pratapgarh

Haryana:

Faridabad (New Township) , Gurgaon , Panipat, Yamunanagar, Rohtak, Hisar, Karnal, Sonipat, Panchkula (Urban Estate), Ambala Sadar, Bhiwani, Ambala, Sirsa, Bahadurgarh, Jind, Thanesar, Kaithal, Rewari, Palwal, Hansi, Narnaul, Fatehabad, Gohana, Tohana, Narwana.

[alloycarbonsteel]

M2  tungsten-molybdenum High Speed Steel

M2  tungsten-molybdenum High Speed Steel

M2 metal is a widespread motive molybdenum-type high-speed metal displaying well-balanced durability, put on-resistance and pink hardness residences. This grade is normally used in bloodless work punches and dies and slicing programs regarding excessive-pace and light cuts. M2 high-speed steel is through a long way the maximum famous high-speed metal changing T1 in most programs due to its advanced houses which include its bending strength, toughness and thermo-plasticity—all of which might be better than T1 with the aid of 50%.

Characteristic properties of M2 steel grades:-

High wear resistance.

High working hardness.

Excellent toughness.

High retention of hardness and red hardness.

EQUIVALENT GRADES OF M2 HIGH SPEED STEEL:DIN 1.3343  AFNOR 06-05-04-02  JIS SKH9  SS 2722  FED QQ-T-590  UNI KU  B.S. BM 2  ASTM A597 (CM-2)  SAE J437  ASTM A600  SAE J438  UNS T11302  

Chemical Composition of M2 High Speed Steel:ElementContent (%)C0.78-1.05Mn0.15-0.40Si0.20-0.45Cr0.20-0.45Ni0.3Mo4.50-5.50W5.50-6.75V1.75-2.20Cu0.25P0.03S0.03

 Physical Properties of M2 High Speed Steel:DensitySpecific GravityModulus of ElasticityMachinability  0.294 lb/in3 (8138 kg/m3)  8.14  30 x 106 psi (207GPa)  50-60% of a 1% carbon steel  

HEAT TREATMENT OF M2 TOOL STEEL:

M2 steels are tempered at 565.5°C (1050°F) to obtain hardness from 60 to 65 HRC.ANNEALINGPREHEATAUSTENITIZINGQUENCHTEMPERINGTempTemp( °F)Temp( °F)Temp( °F)Temp( °F)1550/16001500/15502175/2225SALT/OIL1025/1050

Applications of M2 Tool Steel:

The main use of excessive-pace steels remains within the manufacture of various slicing equipment. Typical programs for M2 high speed steel are twist drills, reamers, broaching tools, taps, milling tools, steel saws. M2 is appropriate for bloodless forming gear consisting of extrusion rams and dies, additionally broadly used in all types of slicing gear, knife and punches and die programs, plastic moulds with increased put on resistance and screws.

TYPES OF OTHER GRADES AVAILABLE:

C45, EN8, EN9, EN19, EN24, EN31, EN36C, EN41B, EN47, EN353, IS2062, 42Crmo4, HCHCR, OHNS, D2, D3, H-11, H-13,M2, M35, M42, M48,1.2714, SKD-11, P20, P20+S, P20+Ni, P20+Ni+HH, SAE 4140, SAE4340, SAE 8620, 16MNCR5, 20MNCR5, C35, C40, C50, C60, CK45, 40C8, 45C8, 55C8, C55MN75, SAE 52100, S40C,S355J2G3.

CITIES IN WHICH WE ARE DEALING:

Uttar Pradesh:

Kanpur,Lucknow,Ghaziabad,Agra,Meerut,Varanasi,Prayagraj,Bareilly,Aligarh,Moradabad,Saharanpur,Gorakhpur,Noida, greater Noida, udham  nagar,Firozabad,Jhansi,Muzaffarnagar,Mathura,Ayodhya,Rampur,Shahjahanpur,FarrukhabadFategarh,Budaun,Maunath,Bhanjan,Hapur,Etawah,Mirzapur,Vindhyachal,Bulandshahr,Sambhal,Amroha,Hardoi,Fatehpur,Raebareli,Orai,Sitapur,Bahraich,Modinagar,Unnao,Jaunpur,Lakhimpur,Hathras,Banda,Pilibhit,Barabanki,Khurja,Gonda,Mainpuri,Lalitpur,Etah,Deoria,Badaun,Ghazipur,Sultanpur,Azamgarh,Bijnor,Sahaswan,Basti,Chandausi,Akbarpur,Ballia,Tanda,Shikohabad,Shamli,Awagarh,Kasganj.

Rajasthan:

Jaipur, Jodhpur, Kota, Bikaner ,Bhiwadi  ,Ajmer ,Udaipur ,Bhilwara ,Alwar ,Bharatpur,bharan ,Sri Ganganagar ,Sikar ,Pali ,Tonk ,Kishangarh ,Beawar ,Hanumangarh ,Dhaulpur ,Gangapur City, Sawai Madhopur ,Churu ,Jhunjhunu ,Baran ,Chittaurgarh ,Makrana ,Nagaur ,Banswara ,Dungarpur, pratapgarh

Haryana:

Faridabad (New Township) , Gurgaon , Panipat, Yamunanagar, Rohtak, Hisar, Karnal, Sonipat, Panchkula (Urban Estate), Ambala Sadar, Bhiwani, Ambala, Sirsa, Bahadurgarh, Jind, Thanesar, Kaithal, Rewari, Palwal, Hansi, Narnaul, Fatehabad, Gohana, Tohana, Narwana.

For more details:

Phone no-8076217931

Office Address:             

Alloy Carbon Steel

693 Saini Vihar, Mundka, Delhi 110041

Email id-sumit_garg_1@yahoo.co.in

Website Link-http://alloycarbonsteel.com/

[alloycarbonsteel]

CASE HARDENING STEEL(EN353, 8620, 20MNCR5)

CASE HARDENING STEEL(EN353, 8620, 20MNCR5)

Case Hardening: What is it?

A material processing technique called case hardening is used to make metals harder on the outside. A very thin coating of metal is produced as a result of case hardening that is noticeably tougher than the bulkier volume of metal underneath it. The process of case hardening nearly always needs high temperatures. A metal’s crystal structure can be changed during heating, or the outer surface can have new elements added, to change the metal’s composition and produce hardening. Case hardening is often carried out after the majority of other fabrication operations have been finished since hardening techniques decrease formability and machinability.

Case Harden: Why?

Instead of attempting to harden a complete metal piece, a material should be case-hardened for a number of reasons. Efficiency is one of the causes. Heating a metal’s outermost surface as compared to its full cross section requires less time and energy. Large-scale manufacturing processes may see significant cost reductions as a result of these improvements. Performance is another factor in the widespread adoption of case hardening. Having a metal with a harder outside and a more malleable inner might be helpful. This may be seen, for instance, in situations where a metal must be able to withstand abrasion while still being able to withstand impact without completely breaking.

Which Metal Types Can Be Case Hardened?

The only metals that can be case hardened are typically ferrous ones, however there are few exceptions, such when some titanium or aluminium alloys are nitrided. Ferrous metals that are frequently case-hardened include:

Steel with low carbon

A high carbon steel

Forged iron

Low alloy, high strength steel

Steel tool

A stainless steel.

Case-hardened parts frequently used in electronics include:

Gears,Fasteners ,Camshafts, Rods, Pins

Steel Case Hardening types:

20mncr5 case hardening steel,

 EN-353 case hardening steel,

SAE 8620 case hardening steel are among the items we provide.

Our range of products include 20mncr5 case hardening steel,En-353 case hardening steel and SAE 8620 case hardening steel.

20MnCr5 Case Hardening Steel:

The case-hardening steel 20MnCr5 has a low carbon content, good hardenability, and strong wear resistance due to the hardening process’ high surface hardness. A benefit of the tiny grain size is high ductility and fatigue resistance. At the surface, this combination of characteristics offers wear resistance, fatigue strength, and impact strength.

Chemical composition of 20MnCr5 Case Hardening Steel:CMnSiSPCr.35-.45.60-1.00.40.035 Max0.035 Max1.00-1.30

Physical Properties of 20MnCr5:Thermal Conductivity at °C20350700W/(m*K)11.712.813.5

Hardness: 218HRC

Applications of 20MnCr5 Case Hardening Steel: Gear shafts, spinning tools, ball and roller bearings, heavy vehicle and automobile gearbox parts, general engineering works.

SAE 8620 Case Hardening Steel:

Low carbon content but strong hardenability make SAE 8620 a case-hardening steel that achieves good wear resistance thanks to a high surface hardness after hardening. A benefit of the tiny grain size is high ductility and fatigue resistance. At the surface, this combination of characteristics offers wear resistance, fatigue strength, and impact strength. The addition of nickel and molybdenum enhances ductility, toughness, and corrosion resistance.

Chemical composition of SAE 8620 Hardening Steel:CMnSiSPCrNiMo.18-.23.70- .90.35 MAX0.040.04.40- .60.40- .70.15- .25

Physical Properties of SAE 8620:PropertiesMetricImperialDensity7.85 g/cm30.284 lb/in³

Hardness: 149HRC

Applications of SAE 8620 Case Hardening Steel :

Include axles, arbours, camshafts, universal joints, driving pinions, and link components. All of these parts must be able to withstand wear and

EN-353 Case Hardening Steel:

The case-hardening steel EN-353 has a low carbon content, good hardenability, and strong wear resistance due to the hardened steel’s high surface hardness. A benefit of the tiny grain size is high ductility and fatigue resistance. At the surface, this combination of characteristics offers wear resistance, fatigue strength, and impact strength. The addition of nickel and molybdenum enhances ductility, toughness, and corrosion resistance.

Chemical composition of EN-353 Case Hardening Steel:CMnSiSPCrNiMo.20 MAX.50 – 1.00.35 MAX0.040.04.75 – 1.251.00 – 1.50.08 – .15

Hardness: HB 270

Physical Properties EN-353:Thermal Conductivity at °C 20 350700 W/(m*K) 11.3 13.314.5 

Applications of EN-353 Case Hardening Steel:

Gear shafts, spinning tools, ball and roller bearings, heavy vehicle and automobile gearbox parts, general engineering works.

CITIES IN WHICH WE ARE DEALING:

Uttar Pradesh:

Kanpur,Lucknow,Ghaziabad,Agra,Meerut,Varanasi,Prayagraj,Bareilly,Aligarh,Moradabad,Saharanpur,Gorakhpur,Noida, greater Noida, udham  nagar,Firozabad,Jhansi,Muzaffarnagar,Mathura,Ayodhya,Rampur,Shahjahanpur,FarrukhabadFategarh,Budaun,Maunath,Bhanjan,Hapur,Etawah,Mirzapur,Vindhyachal,Bulandshahr,Sambhal,Amroha,Hardoi,Fatehpur,Raebareli,Orai,Sitapur,Bahraich,Modinagar,Unnao,Jaunpur,Lakhimpur,Hathras,Banda,Pilibhit,Barabanki,Khurja,Gonda,Mainpuri,Lalitpur,Etah,Deoria,Badaun,Ghazipur,Sultanpur,Azamgarh,Bijnor,Sahaswan,Basti,Chandausi,Akbarpur,Ballia,Tanda,Shikohabad,Shamli,Awagarh,Kasganj.

Rajasthan:

Jaipur, Jodhpur, Kota ,Bikaner ,Bhiwadi  ,Ajmer ,Udaipur ,Bhilwara ,Alwar ,Bharatpur,bharan ,Sri Ganganagar ,Sikar ,Pali ,Tonk ,Kishangarh ,Beawar ,Hanumangarh ,Dhaulpur ,Gangapur City, Sawai Madhopur ,Churu ,Jhunjhunu ,Baran ,Chittaurgarh ,Makrana ,Nagaur ,Banswara ,Dungarpur, pratapgarh

Haryana:

Faridabad (New Township) ,Gurgaon , Panipat, Yamunanagar, Rohtak, Hisar, Karnal, Sonipat, Panchkula (Urban Estate), Ambala Sadar, Bhiwani, Ambala, Sirsa, Bahadurgarh, Jind, Thanesar, Kaithal, Rewari, Palwal, Hansi, Narnaul, Fatehabad, Gohana, Tohana, Narwana.

TYPES OF OTHER GRADES AVAILABLE :

C45, EN8, EN9, EN19, EN24, EN31,EN36C, EN41B, EN47, EN353, IS2062, 42Crmo4, HCHCR, OHNS, D2, D3, H-11, H-13,M2, M35, M42, M48,1.2714, SKD-11, P20, P20+S, P20+Ni, P20+Ni+HH, SAE 4140, SAE4340, SAE 8620, 16MNCR5, 20MNCR5, C35, C40, C50, C60, CK45, 40C8, 45C8, 55C8, C55MN75, SAE 52100, S40C,S355J2G3.

CITIES IN WHICH WE ARE DEALING:

Uttar Pradesh:

Kanpur,Lucknow,Ghaziabad,Agra,Meerut,Varanasi,Prayagraj,Bareilly,Aligarh,Moradabad,Saharanpur,Gorakhpur,Noida, greater Noida, udham  nagar,Firozabad,Jhansi,Muzaffarnagar,Mathura,Ayodhya,Rampur,Shahjahanpur,FarrukhabadFategarh,Budaun,Maunath,Bhanjan,Hapur,Etawah,Mirzapur,Vindhyachal,Bulandshahr,Sambhal,Amroha,Hardoi,Fatehpur,Raebareli,Orai,Sitapur,Bahraich,Modinagar,Unnao,Jaunpur,Lakhimpur,Hathras,Banda,Pilibhit,Barabanki,Khurja,Gonda,Mainpuri,Lalitpur,Etah,Deoria,Badaun,Ghazipur,Sultanpur,Azamgarh,Bijnor,Sahaswan,Basti,Chandausi,Akbarpur,Ballia,Tanda,Shikohabad,Shamli,Awagarh,Kasganj.

Rajasthan:

Jaipur, Jodhpur, Kota ,Bikaner ,Bhiwadi  ,Ajmer ,Udaipur ,Bhilwara ,Alwar ,Bharatpur,bharan ,Sri Ganganagar ,Sikar ,Pali ,Tonk ,Kishangarh ,Beawar ,Hanumangarh ,Dhaulpur ,Gangapur City, Sawai Madhopur ,Churu ,Jhunjhunu ,Baran ,Chittaurgarh ,Makrana ,Nagaur ,Banswara ,Dungarpur, pratapgarh

Haryana:

Faridabad (New Township) ,Gurgaon , Panipat, Yamunanagar, Rohtak, Hisar, Karnal, Sonipat, Panchkula (Urban Estate), Ambala Sadar, Bhiwani, Ambala, Sirsa, Bahadurgarh, Jind, Thanesar, Kaithal, Rewari, Palwal, Hansi, Narnaul, Fatehabad, Gohana, Tohana, Narwana.

For more details:

Phone no-8076217931

Office Address:             

Alloy Carbon Steel

693 Saini Vihar, Mundka, Delhi 110041

Email id-sumit_garg_1@yahoo.co.in

Website Link-http://alloycarbonsteel.com/

[alloycarbonsteel]

EN31 ALLOY STEEL\SAE 52100 Steel

EN31 ALLOY STEEL:

EN31 is a very high energy metallic alloy.This is a hardened and tempered before presenting and has nickel, chromium, molybdenum making its excessive tensile metal power, with exact ductility and wear resistance. With pretty precise effect homes at low temperatures, EN31 is likewise appropriate for a selection of accelerated temperatures. EN31 steel have good inner strength and excessive external strength, which makes them enormously put on-resistant. EN31 metallic round bars offer a great mixture of ductility, energy, and wear resistance. EN31 is a very high-power alloy engineering steel.

Equivalent grades of EN31 alloy steel:

BRITISH BS 970:1991 535A99

SWEDISH SS 2258

GERMAN DIN 100CR6

AMERICAN SAE 52100

BRITISH BS 970:1955 EN31

FRENCH AFNOR 100C6

Chemical composition of EN31:ElementCarbonSiliconManganesePhosphorusSiliconChromiumContent (%)0.95-1.100.10-0.350.40-0.700.040 Max0.050 Max1.20-1.60

Physical Properties of EN31 :NAME OF MATERIALCOMPOSITION IN % OF WEIGHTTHERMAL CONDUCTIVITY W/M-KDENSITY KG/M^3MELTING POINTCMn Si Cr S P MgEn-31 IS-103 Crl1.50.52 0.22 1.3 0.05 0.05 –46.678101540

Heat treatment of EN31:

Heat treatment temperatures of EN31, which include of heating, cooling, and soaking times will range because of factors along with the shape and size of every EN31 steel element. Temper according to the reason for which the equipment are required, normally a range between 100°C and 50°C and 300°C. Soak well at the selected temperature and soak for as a minimum 1hour according to 25mm of the total thickness. Cool slowly within the air.

Hardness: 63HRC

Heat slowly and start forging at a 100 to1050°C.Allow enough time at the forging temperature for the metallic to be thoroughly soaked through. Reheat as important and do not forge below 850°C. After forging EN31 alloy steel, cool slowly preferably in a furnace.

Density: 7.81 g/cm3

Forging Properties of  EN31:

Heat slowly and start forging at a 100 to1050°C.Allow enough time at the forging temperature for the alloy steel to be thoroughly soaked through. Reheat as important and do not forge below 850°C. After forging EN31 alloy steel, cool slowly preferably in a furnace.

En19 steel is forged at around 926°C to 1205°C.

Forms of EN31 Steel Pipes: 

Outer Diameter(OD)-Upto 550mm

Inner Diameter(ID)-upto 400mm

Length-Upto 6000mm length

Forms of EN31 alloy Flat bar steel:

Flat bar/Rolled flat bar-thickness upto 50mm width upto 455mm

Forged flat bar-thickness upto 305mm and width upto 455mm

Forms of EN31 alloy steel Round bar:

Rolled round bar – diameter 16mm to 250mm

Heavy forged round – diameter 200mm to 450mm

Heavy machined round – diameter 260mm to 620mm

Forms of En31 alloy steel plates/SAE 52100 Steel:

Length upto 6300mm

Thickness upto 120mm

Applications for EN31 steel:

It is used in taps,ejector pins,gauges,roller bearings and swaging dies. It is an excellent alloy steel for put on resisting machine elements and for press gear which do now not benefit a extra complex quality.

TYPES OF OTHER GRADES AVAILABLE :

C45, EN8, EN9, EN19, EN24, EN31,EN36C, EN41B, EN47, EN353, IS2062, 42Crmo4, HCHCR, OHNS, D2, D3, H-11, H-13,M2, M35, M42, M48,1.2714, SKD-11, P20, P20+S, P20+Ni, P20+Ni+HH, SAE 4140, SAE4340, SAE 8620, 16MNCR5, 20MNCR5, C35, C40, C50, C60, CK45, 40C8, 45C8, 55C8, C55MN75, SAE 52100, S40C,S355J2G3.

CITIES IN WHICH WE ARE DEALING:

Uttar Pradesh:

Kanpur,Lucknow,Ghaziabad,Agra,Meerut,Varanasi,Prayagraj,Bareilly,Aligarh,Moradabad,Saharanpur,Gorakhpur,Noida, greater Noida, udham  nagar,Firozabad,Jhansi,Muzaffarnagar,Mathura,Ayodhya,Rampur,Shahjahanpur,FarrukhabadFategarh,Budaun,Maunath,Bhanjan,Hapur,Etawah,Mirzapur,Vindhyachal,Bulandshahr,Sambhal,Amroha,Hardoi,Fatehpur,Raebareli,Orai,Sitapur,Bahraich,Modinagar,Unnao,Jaunpur,Lakhimpur,Hathras,Banda,Pilibhit,Barabanki,Khurja,Gonda,Mainpuri,Lalitpur,Etah,Deoria,Badaun,Ghazipur,Sultanpur,Azamgarh,Bijnor,Sahaswan,Basti,Chandausi,Akbarpur,Ballia,Tanda,Shikohabad,Shamli,Awagarh,Kasganj.

Rajasthan:

Jaipur, Jodhpur, Kota ,Bikaner ,Bhiwadi  ,Ajmer ,Udaipur ,Bhilwara ,Alwar ,Bharatpur,bharan ,Sri Ganganagar ,Sikar ,Pali ,Tonk ,Kishangarh ,Beawar ,Hanumangarh ,Dhaulpur ,Gangapur City, Sawai Madhopur ,Churu ,Jhunjhunu ,Baran ,Chittaurgarh ,Makrana ,Nagaur ,Banswara ,Dungarpur, pratapgarh

Haryana:

Faridabad (New Township) ,Gurgaon , Panipat, Yamunanagar, Rohtak, Hisar, Karnal, Sonipat, Panchkula (Urban Estate), Ambala Sadar, Bhiwani, Ambala, Sirsa, Bahadurgarh, Jind, Thanesar, Kaithal, Rewari, Palwal, Hansi, Narnaul, Fatehabad, Gohana, Tohana, Narwana.

For more details:

Phone no-8076217931

Office Address:             

Alloy Carbon Steel

693 Saini Vihar, Mundka, Delhi 110041

Email id-sumit_garg_1@yahoo.co.in

Website Link-http://alloycarbonsteel.com/

[alloycarbonsteel]

EN41B ALLOY STEEL

EN41B alloy steel/tool steel:

En41B is a completely famous grade of low carbon Manganese Free Cutting Steel. It will obtain high wear resistance & abrasion resistance,high toughness, and excellent ductility after nitrided.

Equivalent grades of EN41B tool steel:GermanyChinaJapan  UK        France41CrAlMo7/1.8509 34CrAlMo5/1.850738CrMoAlSACM645  905M39/905M3140CAD6.12/30CAD6.12

Chemical composition of EN41B alloy steel:ElementCSiMnAlPCrSMoContent (%)0.35-0.450.10-0.45≤0.651.90-1.30≤ 0.0351.40-1.80≤ 0.0350.10-0.25

Hardness of EN41B alloy steel:

Hardness: max 229HB

Physical Properties of EN41B tool steel:DENSITY (LB/IN 3)0.292DENSITY (G/CM 3)8.08MELTING POINT (°F)2600MELTING POINT (°C)1425

Forging Property:

EN41B metal forging temperature:850 – 1200°C,cooling as slowly as possible in sand after solid.

Heat Treatment:ANNEALINGHARDENINGTEMPERINGNORMALIZINGTempTemp( °C)Temp( °C)Temp( °C)840°C – 870°C930°C – 970°C600°C – 650°C930°C – 970°C, Cooling in air  

FORMS OF EN41B ALLOY STEEL (Round section):

DIAMETER-20mm to 455mm.

EN41B Alloy Steel applications:

in Oil and Gas Pipeline, in Chemical Industry, in Plumbing, in Heating, in Power Plant, in Paper & Pulp Industry, in Fabrication Industry, in Food Processing Industry, in Water Supply Systems, in Structural Pipe, in Heat Exchangers, in General purpose applications

TYPES OF OTHER GRADES AVAILABLE :

C45, EN8, EN9, EN19, EN24, EN31, EN36C, EN41B, EN47, EN353, IS2062, 42Crmo4, HCHCR, OHNS, D2, D3, H-11, H-13,M2, M35, M42, M48,1.2714, SKD-11, P20, P20+S, P20+Ni, P20+Ni+HH, SAE 4140, SAE4340, SAE 8620, 16MNCR5, 20MNCR5, C35, C40, C50, C60, CK45, 40C8, 45C8, 55C8, C55MN75, SAE 52100, S40C,S355J2G3.

CITIES IN WHICH WE ARE DEALING:

Uttar Pradesh:

Kanpur,Lucknow,Ghaziabad,Agra,Meerut,Varanasi,Prayagraj,Bareilly,Aligarh,Moradabad,Saharanpur,Gorakhpur,Noida, greater Noida, udham  nagar,Firozabad,Jhansi,Muzaffarnagar,Mathura,Ayodhya,Rampur,Shahjahanpur,FarrukhabadFategarh,Budaun,Maunath,Bhanjan,Hapur,Etawah,Mirzapur,Vindhyachal,Bulandshahr,Sambhal,Amroha,Hardoi,Fatehpur,Raebareli,Orai,Sitapur,Bahraich,Modinagar,Unnao,Jaunpur,Lakhimpur,Hathras,Banda,Pilibhit,Barabanki,Khurja,Gonda,Mainpuri,Lalitpur,Etah,Deoria,Badaun,Ghazipur,Sultanpur,Azamgarh,Bijnor,Sahaswan,Basti,Chandausi,Akbarpur,Ballia,Tanda,Shikohabad,Shamli,Awagarh,Kasganj.

Rajasthan:

Jaipur, Jodhpur, Kota, Bikaner ,Bhiwadi  ,Ajmer ,Udaipur ,Bhilwara ,Alwar ,Bharatpur,bharan ,Sri Ganganagar ,Sikar ,Pali ,Tonk ,Kishangarh ,Beawar ,Hanumangarh ,Dhaulpur ,Gangapur City, Sawai Madhopur ,Churu ,Jhunjhunu ,Baran ,Chittaurgarh ,Makrana ,Nagaur ,Banswara ,Dungarpur, pratapgarh

Haryana:

Faridabad (New Township) , Gurgaon , Panipat, Yamunanagar, Rohtak, Hisar, Karnal, Sonipat, Panchkula (Urban Estate), Ambala Sadar, Bhiwani, Ambala, Sirsa, Bahadurgarh, Jind, Thanesar, Kaithal, Rewari, Palwal, Hansi, Narnaul, Fatehabad, Gohana, Tohana, Narwana.

For more details:

Phone no-8076217931

Office Address:             

Alloy Carbon Steel

693 Saini Vihar, Mundka, Delhi 110041

Email id-sumit_garg_1@yahoo.co.in

Website Link-http://alloycarbonsteel.com/

[alloycarbonsteel]

EN24 ALLOY STEEL

EN24 ALLOY STEEL :

EN24 is an excessive strength metallic alloy that is additionally known as 4340. It is furnished, tempered, and hardened. It is popular and extensively used due to its tremendous strength in numerous additives, which includes bolts, gears, and studs. Other grades can be surfaced-hardened to create parts with stepped forward water resistance through nitriding or induction.

Chemical composition of EN24:Element  Carbon  Silicon  Manganese  Phosphorus  Sulphur  Chromium  Molybdenum  Nickle  Content (%)  0.36-0.44  0.10-0.35  0.45-0.70  0.035 Max  0.040 Max  1.00-1.40  0.20-0.35  1.30-1.70  

EN24 Physical Properties:

Physical PropertiesMetricUS/ImperialDensity7.80 g/cc0.282 lb/in³

Hardness-248 to 302HRC

 Forging Properties of EN24:

Preheat carefully, then raise temperature to 1000-1100°C for forging. Do now not forge the steel beneath 850-1100°C. After forging cool slowly preferably in a furnace.

Forms of EN19 Steel Pipes: 

Outer Diameter(OD)-Upto 550mm

Inner Diameter(ID)-upto 400mm

Length-Upto 6000mm length

Forms of EN24 alloy Flat bar steel:

EN24 Flat

EN24T flat sections can be produced via go slicing from massive cast machined billet.

Flat bar/Rolled flat bar-thickness upto 50mm width upto 455mm

Forged flat bar-thickness upto 305mm and width upto 455mm

Forms of EN24 alloy steel Round bar:

EN24 Round Bar

EN24 is produced in a massive variety of round bar sizes starting at 6.35mm up to about 1 metre in diameter.

Rolled round bar – diameter 16mm to 250mm

Heavy forged round – diameter 200mm to 450mm

Heavy machined round – diameter 260mm to 620mm

Forms of En24 alloy steel plates:

Width upto 2000mm

Length upto 6300mm

Thickness upto 120mm

EN24 applications:

When used for programs in its heat treated circumstance EN24 combines excessive tensile strength with shock resistance. It is simple to work and may be forged or stamped with out trouble. EN24 is machinable inside the annealed circumstance or when hardened and tempered.

• Power transmission gears and other gears requiring maximum hardness.

• Bolts, screwed components, stub axles, swivel fingers required very tough.

• Structural additives with top high tensile wishes.

• Cranks, axles, propellor and gearbox shafts requiring good high tensile residences.

• Connecting rods, unique cranks and different elements required to be stiff and but preserve a excessive degree of toughness.

• Plastics and rubber moulding industry parts for moulds, hob preserving earrings, stop pins.

TYPES OF OTHER GRADES AVAILABLE :

C45, EN8, EN9, EN19, EN24, EN31,EN36C, EN41B, EN47, EN353, IS2062, 42Crmo4, HCHCR, OHNS, D2, D3, H-11, H-13,M2, M35, M42, M48,1.2714, SKD-11, P20, P20+S, P20+Ni, P20+Ni+HH, SAE 4140, SAE4340, SAE 8620, 16MNCR5, 20MNCR5, C35, C40, C50, C60, CK45, 40C8, 45C8, 55C8, C55MN75, SAE 52100, S40C,S355J2G3.

CITIES IN WHICH WE ARE DEALING:

Uttar Pradesh:

Kanpur,Lucknow,Ghaziabad,Agra,Meerut,Varanasi,Prayagraj,Bareilly,Aligarh,Moradabad,Saharanpur,Gorakhpur,Noida, greater Noida, udham  nagar,Firozabad,Jhansi,Muzaffarnagar,Mathura,Ayodhya,Rampur,Shahjahanpur,FarrukhabadFategarh,Budaun,Maunath,Bhanjan,Hapur,Etawah,Mirzapur,Vindhyachal,Bulandshahr,Sambhal,Amroha,Hardoi,Fatehpur,Raebareli,Orai,Sitapur,Bahraich,Modinagar,Unnao,Jaunpur,Lakhimpur,Hathras,Banda,Pilibhit,Barabanki,Khurja,Gonda,Mainpuri,Lalitpur,Etah,Deoria,Badaun,Ghazipur,Sultanpur,Azamgarh,Bijnor,Sahaswan,Basti,Chandausi,Akbarpur,Ballia,Tanda,Shikohabad,Shamli,Awagarh,Kasganj.

Rajasthan:

Jaipur, Jodhpur, Kota ,Bikaner ,Bhiwadi  ,Ajmer ,Udaipur ,Bhilwara ,Alwar ,Bharatpur,bharan ,Sri Ganganagar ,Sikar ,Pali ,Tonk ,Kishangarh ,Beawar ,Hanumangarh ,Dhaulpur ,Gangapur City, Sawai Madhopur ,Churu ,Jhunjhunu ,Baran ,Chittaurgarh ,Makrana ,Nagaur ,Banswara ,Dungarpur, pratapgarh

Haryana:

Faridabad (New Township) ,Gurgaon , Panipat, Yamunanagar, Rohtak, Hisar, Karnal, Sonipat, Panchkula (Urban Estate), Ambala Sadar, Bhiwani, Ambala, Sirsa, Bahadurgarh, Jind, Thanesar, Kaithal, Rewari, Palwal, Hansi, Narnaul, Fatehabad, Gohana, Tohana, Narwana.

For more details:

Phone no-8076217931

Office Address:             

Alloy Carbon Steel

693 Saini Vihar, Mundka, Delhi 110041

Email id-sumit_garg_1@yahoo.co.in

Website Link-http://alloycarbonsteel.com/