#cheap hitachi hard drive

[thenextchapterbegins]

The Three pillars attack

@voxiiferous​ {mentioned}

In the new highrises of pride built in the newly acquired hitachi territory. The silicon dreams of the future are discussed. As neon and silicon adorn those below.

Gier guld sits head at the table, to his right sat komai and various other presidents, and to his right sat various corpo leaders. “Turn to page 414 as we begin our formal attack into the pride district and more importantly vox.” The various sounds of papers shuffling. “Komai take the lead. This was your idea after all.” Komai  Kenichirō the man from manchuria, when he was alive, broke guangdong into the perfect state before his untimely death was the perfect canidate to lead the new growing territory in pride.

Komai could be described as the poor man’s vox. Like the media overlord he too unlike many from greed was constructed of electronics but unlike vox he was not built with majestic pieces of the future his head was an old crt tv head, a cheap suit and prosethetic hands and feet. put together by a hard unknown torso some believe to be rusted metal.

Yet he stood grainy face with the same charamastic charm as his real life. 

“Thank you gier and thank you fellow members of the board for allowing me to represent our grand ring of greed. The plan is simple but devastating we are engaging in a three pillar strategy to dismantle vox from his place. Thanks to giers earlier visit we can assume vox is entering a rapid state of defense, he will spread his arms to try and protect his many assets but in doing so will leave himself widely weak to our attacks. As we turn the page we will see our first pillar or first strike will be on the tv and phone industry. We will offer a new alternative to pride. Satelite tv..thanks to our reaches into the human world we have managed to mangle a way to hijack the satelites of the human realm into hell allowing the citizens of hell to finally unshackle themselves from voxitechs many programming and give the people of pride the tv they once watched once alive. Various plans and tiers will be offered to allow different tiers of programs available but even the cheapest options will be a godsend to those sick of vox-specific programs.”

Komai grainy smile spreads on his screen. “we will offer a new phone line offering 5g services. A slightly faster internet, more download space, less prone to over heating, various fixes to vox’es relatively cheap products...that break in a week and you have to buy new ones. We instead will instill a efficient and care to our products make our consumers feel like they are more then just a number. That we wish to see them happy with our products we find that instills them more to buy more of our goods at greater prices. Also on the next page we will offer attached to gier insurance services a way to break out of contracts....with legal help if needed. We need to crush vox in every avenue and his contract business is brimming with people just aching to get out and into new waters.”

“The next pillar will be the food industry, we will provide cheap but quality food to the basically starving populace of pride. Our many connections to the many rings means prides food shortages is a hand wave. We will offer new factory work to provide various canned, meats, spices, etc. A food revolution if you will. We expect it will cripple vox’es already small food industries. A smaller strike to the first but this is more to endear ourselves to pride and the next page the pillar the last strike. Transportation.”

“Pride is a city much like...americas new york i am told, more focused on cab’s then cars. Traffic hell, we will order several ordniances to see an improvement to prides overall highway structures, implement subway systems, release a new affordable car to increase people driving instead of taking cabs. A total rehaul to the...urban planning of pride. We of course mean that much demolishing will occur of the current city but morita has convinced much of the board to allow re-housing projects...and assisted in much of this first planning.”

“I remind that this first phase is a bit unorthodox to our normal systems but pride is so fundemtnally broken we need to help it a bit...and reminder that we will see profits drop during this period but we are not attempting to generate profits during phase 1. The point of phase 1 is to endear pride to us, crush vox’es influence and gain large swathes of prides territory. In phase 2 we will use the poweresses of our other presidents to bring pride to the speed we want and bring profits skyrocketing.”

Komai sits back down as the board claps as the speech ends before gier raises a hand before lifting his drink. “Well said komai, well then gents. Let’s drink to our continued success and to our continued PROFITS!”

[nahasdyna]

2009 mac mini ram upgrade

#2009 mac mini ram upgrade upgrade#

#2009 mac mini ram upgrade pro#

#2009 mac mini ram upgrade plus#

#2009 mac mini ram upgrade mac#

To open the Mini up, you need the stupid putty knife method - the person who designed this case is a complete idiot. Touch some metal objects to discharge any static. Now shutdown the computer and remove all peripherals and power leads. Reboot the machine holding alt (the alt-key on the new keyboard works finally) and make sure you can boot from the external drive. Download Carbon Copy Cloner (CCC) or SuperDuper - I used CCC - and clone your internal onto the external drive. Format the external drive as GUID partition map (important!) and HFS+ Extended Journaled with disk utility. When you get all the parts, put the drive into the enclosure and plug it into your new machine, which you should have setup (don't setup Bootcamp yet though).

#2009 mac mini ram upgrade mac#

I also got a cheap Mac compatible 2.5" SATA enclosure from ebay for under £10: I opted for 4GB RAM (check Crucial for the right kind) and a 250GB 7200rpm Hitachi Travelstar hard drive (they are supposed to be quieter than Seagates and I can verify they are pretty quiet).

#2009 mac mini ram upgrade upgrade#

What you will need to do first of all is buy your upgrade parts.

#2009 mac mini ram upgrade plus#

What I did was upgrade to 4GB Ram and a 250GB 7200rpm drive for £630 plus I can get £50 back, which I'll explain so overall £580 The 4GB Ram upgrade costs £120 and a 250GB 5400rpm drive is £80. The base Mini is 2GHz Core 2 Duo for £499. If you're not sure about it, pay an Apple Certified Tech to do the upgrade for you but then you won't save much money.Īpple's upgrade prices on the Mini are quite expensive so this can save you some money. There are actually no stickers inside that you have to break to change the RAM or HDD and I didn't find it to be all that bad. If you plan on upgrading yourself, doing any damage inside can void your warranty. Learn more about the new iMac on the Apple site.I thought I would provide a few tips for upgrading the 2009 Mac Mini, which some guides don't cover fully. Delivery will begin the second half of May. You'll be able to pre-order the new 24" iMac next Friday at 8 AM EDT. It's an easy decision that will future-proof your system and deliver performance gains as well. For the top-tier iMac, which already has 512GB of storage, that means spending $200 to increase it to 1TB. That's why I recommend you spend your upgrade money on doubling your SSD storage. Also, if your SSD is full, that means your system can't swap out some of that memory to boost performance as needed. Sure, you can plug an external SSD into one of the Thunderbolt ports for fast transfer (and I'll have a list of excellent ones for you in the near future) but it's not as fast as on-chip storage. While upgrading your storage drive was possible (albeit difficult) with previous iMacs, it's impossible to do so with the new M1 chips. Even offloading storage to my iCloud Drive, I've still nearly filled the entirety of my 1TB SSD drive. While you might not need more than 8GB of unified memory in your new iMac there is one thing that you should immediately upgrade when you configure your new machine.Ĭhances are your current system's storage is already bursting with documents, images, movies, and apps. But your money could be spent better elsewhere. If you have the money, there's no reason to not upgrade. For most users 8GB is going to be more than enough for day-to-day computing tasks. With a unified memory upgrade being so cheap, you might wonder why I'd recommend not spending the money. This number is far from the wallet-blistering Apple-tax that upgraders used to pay for factory RAM. You can upgrade to 16GB for a measly $200. However, if you're editing large 4K videos or doing other extremely intensive tasks, you might benefit from additional unified memory in your system.

#2009 mac mini ram upgrade pro#

Reviews of the first M1 systems (the MacBook Pro and Mac Mini) show that Apple has finally been able to create a system with a base of 8GB of RAM that not only performs well but outperforms previous systems with twice as much RAM (also, it's called "unified memory" now). Everything just works together and borrows processing from each other as needed. The CPU and GPU aren't both trying to access data pathways on the logic board. There's no memory swapping or rewriting of data between your RAM and SSD. The M1 chip can dynamically use whatever it needs, from whichever component it needs, instantaneously. Having everything on a single chip changes that fundamentally. RAM is a system's short term memory and having lots of it means you can do more and larger tasks simultaneously without slowing things down. Traditional thinking has always said, add as much RAM as you can afford. But the more I researched the new M1 chip and how it's performed in the new MacBook Pro and Mac Mini, the less concerned I was. As someone who falls into that category, I expected to be more upset at the change.

[allhdd43-blog]

cisco 48 ports switches

ALLHDD.COM is a merchant based in New York, United States of servers and networking products offering competitive prices for all types of computer hardware specializing in server, storage solutions and related sub systems such as for Tape storage, Hard Drives, Server and Networking gears including switches, routers, gbic, hub and modules. ALLHDD.COM is a company that supplies thousands of server and networking spare parts from nearly 450 different manufacturers and distributors including HP, Cisco, IBM, Dell, SUN, Qlogic, Emulex, Toshiba, Western Digital, Lsi Logic, Intel, Samsung, Seagate, Hitachi, AMD, Lenovo, 3Com and more. We are experienced in our business over 240,000 customers around the world trust ALLHDD.COM to deliver undertaking vital hardware on time.

[thetechmagazine-blog]

E-Commerce/Online seller in United States

Service can never ever expand without the help of various other very closely related businesses. In order for services to grow, they need to comply. Every service is searching for every opportunity to grow and also for that reason communication is essential. Proper interaction aids the company to connect with various other companies within and also beyond the boundaries. For that reason, smaller sized organisations can benefit a good deal from communicating with other companies located beyond the local atmosphere. This assists to reinforce ties beyond the boundaries, providing success to the business. Proper interaction helps the organization to expand in locations where resources are readily available as well as labor is cheap. Visit website to find out more about cisco 48 ports switches right now.

Modern technology as well as interaction

Advancement in modern technology has played a vital duty in helping people to remain in call and organizations across borders. Organisations have actually been aided to engage and increase to international nations. Chatting, e-mails, video clip seminars, social networking sites among other tools of interaction have played a crucial duty in promoting communication. Therefore, if a consumer is trying to find a chance to buy a product and/or service, all they might require to do is to send a message to the company expressing their passion.

Communication and also technology work together to ensure successful profession- without cellphones and computers, interaction can verify tough. Nonetheless, communication in the online world has its threats. Hackers as well as infections prevail. Moreover, there is the challenge of climbing electrical energy costs. As a result of inefficient and bad switches, households as well as services are paying considerable quantities of cash for using technological tools.

The solution for high power prices, hackers and also infections

CISCO switches are helping to conserve up high-energy costs, decreasing power costs as well as shielding the database. The buttons play a crucial role in fixing these issues. They are fitted with the CISCO Energy Wise technology that aids to minimize the cost of electrical energy. For that reason, the financial savings can be diverted to various other usages. The CISCO collection is a brand-new generation component that helps services to decrease their power consumption degrees.

Its highlights attribute reduced usage degrees of power. It assists to support the power usage levels of the network framework. Additionally, it applies programs that conserve energy. The switch creates greater connectivity while decreasing chances of viruses gaining access to the computer. They feature a terrific transfer rate and information links that have self-defense abilities that permit these collection switches over to safeguard itself particularly when info passes or goes into through the computer's data source. The CISCO button boosts efficiency with the process of unifying information, video and also voice networks.

[andmaybegayer]

My desktop contains:

Cheap WD Green SSD, scavenged from an old laptop

Old Hitachi hard drive, scavenged from an external hard drive

Cheap Toshiba hard drive, pretty much new but taken out of a laptop

Fancy Samsung 860 Evo SSD

Guess which one isn't showing up in the device list!

[dontshootmespence]

Don’t Be a Stranger

Summary: Your on-again, off-again fuck buddy Dean rolls back into town, but something about him is different this time. Will you be able to handle the change?

Pairing: MOC!Dean x Reader

Word Count: 1,929

Warnings: Rough sex, hitachi fun, butt plug, slight spanking, squirting. Good jams with desperate Dean.

A/N: For those of you 18 and over! This fulfills my “sex toys” square for @spnkinkbingo and my plugs prompt for @covered-byroses kink challenge.

Coming home smelling of cheap beer, whiskey and cigarette smoke wasn’t exactly your idea of the best job ever, but with your ample assets and ability to flirt with whoever necessary no matter how disgusting or good-looking, it paid the bills.

Pushing past the impossibly heavy door to your apartment, you peeled off your leather jacket and threw it over the back end of the couch, worn by years of passing out on it instead of your own bed. Perk of living in the middle of buttfuck nowhere was that even your pittance of a paycheck provided you with a halfway decent apartment. Clean it wasn’t, but that was your own fault, normally too tired to bother cleaning after making whatever comfort food you wanted for dinner. It was - as Goldilocks would say - just right. 

After shoveling nearly half a box of Kraft mac and cheese into your face, you went to brush your teeth and get changed. This was the one night of the week were you got off early and didn’t have work the next day. So tonight, you’d treat yourself. Light some vanilla candles, get nice and relaxed with a bubble bath, put on some silky lingerie and go to town on yourself. It was the least you deserved after six straight days of dealing with the scummiest men imaginable trying to worm their way into your pants.

You sighed happily and sauntered through the apartment, turning on the bathwater and grabbing a couple candles before tossing your vibrator on the bed. Just as you were about to slip into the steaming water, you heard a knock at the door. “You’ve got to be kidding me.”

Grumpily, you pulled on a silky bathrobe and went to answer the door. Whoever it was better have had a good excuse for interrupting your one night off. You peered through the peephole and did a double take. “Dean?”

“Yea, Y/N, it’s me.”

You looked through the glass a third time. He was fidgety; he looked irritated. Normally when he showed up at your door it was because he was sliding through town yet again and the two of you had undeniable chemistry. You were fuck buddies, but you could never sleep with someone you didn’t at least care for to a degree - and Dean looked like hell.

Opening up the door, you invited him and asked if he wanted a drink. When he nodded, you fixed what you knew he drank, which you just so happened to have at home due to your similar taste in liquor. You poured a double shot into a glass, no ice of course, and brought it over to him, passing it to him without a word and watching as he tipped the entire thing back into his mouth. 

“Wanna talk about it?”

“Not really.”

Typical. He rarely opened up.

He scratched at his arm and you glanced down, seeing a mark that hadn’t been there before. Almost looked like a brand. “Something to do with that?”

“Something to do with that.”

After meeting him all those years ago - apparently he, Sam and Cas had just stopped the apocalypse in its tracks - he told you what he did for a living. You’d come into contact with a vamp once, but with Dean’s basic training, you’d taken it down. Other than that, and the fact that you knew of this whole angel and demon business, you didn’t have much knowledge of whatever insane bullshit Dean got himself into. 

“Let’s just say this mark controls me in a way.”

You moved back in your chair, silently chiding yourself for not checking him for signs of demon or vamp or whatever. “Not like that. I’m clean,” he said, pulling out a bottle of holy water and flicking it onto himself. “In a different way. And I need a distraction. The kind of distraction this Mark demands...I’m trying not to give into it. I don’t know any other way. Sam and Cas want to help, but they can’t-I-”

“Dean, it’s okay. You know I’m always down for a distraction.”

He’d already opened up more than you thought. And you didn’t necessarily need his life story if he wasn’t willing to give it. You were great in bed together and right now that was really all he needed. 

Dean smirked slightly, relief flooding his features as he pulled you into his lap and began nipping at your collarbone. “What do you need, Dean?”

“Rough,” he mumbled. “I need to fuck you senseless.”

“I’m down,” you laughed in reply, grinding against the hard denim covering his knee. “How about some toys? You can choose.”

In times like these, Dean needed control and you knew it. Plus, he was never one to leave you hanging, so you knew you’d be taken care of, no matter how soft or rough he was with you. 

Gently tossing you to the side, he nipped at the side of your neck before running into your room. He knew exactly where everything was. “This little thing?” He asked in amazement, probably referring to your vibrator. “This is nothing. I want the big guns.”

He did a little rummaging around and found what he was looking for. The hitachi. You only brought that out when you need a quick, easy, powerful orgasm. “Robe off,” he commanded as he walked out with the wand in hand. 

You did as he demanded and let it drop to the floor. Out of the corner of your eye, you could see your stainless steel butt plug, with a green jewel at the end of course, shining in his side pocket. Removing it from his pants pocket, he placed the tip at your mouth. “You’re going to get this nice and wet and then I’m going to fill up your tight little ass.” Moaning around the plug, you began teasing your nipples as he continued detailing every depraved thing he wanted to do to you - what he needed to do to you. “Then I’m going to take my belt and fasten this wand straight on your clit and fuck you from behind until you come so many times that you can’t move from the floor.”

You’d gotten rough before, but normally not like this - not that you were objecting. It just proved that something was different about him even though you didn’t fully understand.

Dean pulled you close and dipped his head to you nipple, pulling one roughly into his mouth and biting down so hard you gasped out loud. “Am I going to have to keep you quiet?”

“You keep doing things like that, hell yea.”

He grasped you bottom lip between his teeth and growled at the slickness between your legs. He’d barely touched you and yet here you were. “Down on the floor. Face down, ass up.”

Once more, he slipped the plug into your mouth before pushing it into your ass. “That slid in pretty easily. You play with your own ass or is that just for partners?”

“Little bit of both.”

“God, you’re amazing.” By the time Dean was happy with the plug’s position, you could feel your pussy dripping. He gave your ass a playful smack before placing the hitachi against your clit and ensuring it stayed in place by fastening his belt around your waist. 

Even though he started it on the lowest setting, you knew you were in for an experience, even by Dean standards. “Who’s my perfect little slut?”

“I am,” you breathed, a dreamy smile setting upon your face as he placed himself at your entrance. The subtle rumble of the wand on your clit intensified as he slid into your heat, a guttural moan escaping from Dean’s lips. 

He pulled out, almost painstakingly slow, leading you into a false sense of security that shattered like glass as he thrust back into you with one, hard, smooth movement. “God, your pussy is so tight.” You wanted to respond, to say something that might indicate the depth of your need, but as he thrusted back into you, pointed, sharp movements driving your clit down onto the wand over and over again, nothing came out. Nothing but strangled cries and bone deep whimpers.

As he picked up the pace, the intensity becoming more than you ever imagined or experienced, he slipped his hand underneath you to flick the switch on hitachi and up the speed. “Oh fuck! Oh my God, Dean!” 

At your outburst, Dean yanked on the belt, pulling you upward and flush against him. His hand found its way to your mouth and covered it. “You remember last time I was here? You made too much noise and got the landlord called on you? Don’t want to do that again, do you?”

You shook your head and bit your lip, stifling the moan that rumbled up from within as you got lost in the pace of his thrusts and the intensity of the wand and the way your ass gripped tightly onto the metal plug, puckering with each movement.

When he pushed you back down toward the ground, he smacked your ass, the sting of it sending you into a tailspin of begging. “Please, Dean! Please, make me cum. Please, please, please-”

Again he pinned you to the ground, upping the speed of the wand one final time  as he wiggled the plug inside you. “Gonna come in this tight little pussy.”

With one final thrust you came apart, a warm liquid flowing onto the ground below you while your clit throbbed and your pussy tightened around Dean’s cock. “Oh, fuck,” you mumbled into the floor.

You were a bowl of jelly, completely pliable and up for anything Dean had in store. Whether or not you could take much more, you weren’t sure. But instead of taking you to the edge of the universe and back, he flipped you over and turned the wand off, removing the belt from around your waist and removing the plug, letting it fall from his hand with a thud. “What a little slut, do you always squirt when you’re not in control?”

“Only by myself, never had someone make me,” you managed to say, your body still shaking. “How about we get in the shower you interrupted me taking and then I can ride you like there’s no tomorrow?”

Even though he’d just fucked you into next week, Dean’s irritation was evident, the mark on his arm almost burning with an unslakable lust for something you couldn’t place. “Sorry, sweetheart,” he said, lifting you up like a doll and carrying you into the bathroom. “But I gotta go before I do something I regret.”

“What the hell could that be?” 

He turned the bath water on and filled the tub, shaking the last thoughts of confiding in someone away. “You don’t want to know. That’s what this is, right? All fucking, no talking. You don’t need to know what a shitshow my life is. I won’t do that to you.” The last words he spoke came out almost like a whisper, voice cracking from a burden he was barely holding steady. 

After placing you in the tub, he bent down and kissed you, lingering for just a moment before turning away. “I’ll see you.”

“Of course, Dean,” you replied, sinking into the bath water, almost melting into it. You wanted him to stay, to unburden himself of the fuckery, but you knew it was a lost cause, at least right now. “Don’t be a stranger, okay?” 

“With you, no chance. Can’t stay away forever.”

[cheaphitachiharddrive-blog]

E-Commerce/Online seller in United States.

ALLHDD.COM is a vendor  cheap hitachi hard drive  situated in New York, United States of workers and systems administration items offering serious costs for a wide range of PC equipment having some expertise in worker, stockpiling arrangements and related sub frameworks, for example, for Tape stockpiling, Hard Drives, Server and Networking gears including switches, switches, gbic, center point and modules. ALLHDD.COM is an organization that provisions a great many worker and systems administration save parts from about 450 distinct producers and merchants including HP, Cisco, IBM, Dell, SUN, Qlogic, Emulex, Toshiba, Western Digital, Lsi Logic, Intel, Samsung, Seagate, Hitachi, AMD, Lenovo, 3Com and the sky is the limit from there. We are knowledgeable about our business more than 240,000 clients around the globe trust ALLHDD.COM to convey undertaking imperative equipment on schedule.

ALLHDD.COM is a shipper situated in New York, United States of workers and systems administration items offering serious costs for a wide range of PC equipment spend significant time in worker, stockpiling arrangements and related sub frameworks, for example, for Tape stockpiling, Hard Drives, Server and Networking gears including switches, switches, gbic, center and modules. ALLHDD.COM is an organization that provisions a great many worker and systems administration save parts from almost 450 unique makers and wholesalers including HP, Cisco, IBM, Dell, SUN, Qlogic, Emulex, Toshiba, Western Digital, Lsi Logic, Intel, Samsung, Seagate, Hitachi, AMD, Lenovo, 3Com and that's just the beginning. We are knowledgeable about our business more than 240,000 clients around the globe trust ALLHDD.COM to convey undertaking crucial equipment on schedule.

 Hard Disk Drive (HDD) is a non-unstable capacity gadget which utilizes a lot of platter circles and read/compose head for putting away information. Not at all like a SSD where it depends totally upon streak memory chips, a HDD is made out of mechanical parts.

Despite the fact that cutting edge SSDs are out breaking the market with their business, still numerous producers and shoppers consider HDD to be their essential stockpiling medium. This is on the grounds that there are numerous highlights those which a needed by a cutting edge SSD. While then again, a HDD has its own one of a kind points of interest and inconveniences. By knowing the advantages and disadvantages of a HDD, you can arrive at a superior resolution on which one to utilize.

 1. Cost

 A customary hard drive will in general be less in cost than a Solid state drive of a similar limit. On in general a framework that contains the hard circle drive as the capacity gadget won't be exorbitant. The explanation for this is on the grounds that the creation cost for a HDD is altogether lower. Besides this is likewise the least expensive choice in the event that you are searching for an outside hard drive.

 2. Capacity limit

 As far as capacity limit there are different bigger alternatives accessible for a client in HDD. And furthermore the base limit of a HDD is generally higher than a SSD. In spite of different stockpiling limit alternatives, the standard limit that most clients lean toward has seen as 500GB. Moreover these days outside hard drives with 6TB of extra room is moderately simple to discover in the market.

 3. Accessibility

 Both the inward and outer hard drives are generally bountiful in the market. For the clients who are hoping to redesign their PC or construct another framework can without much of a stretch locate a hard plate drive. In the interim buying a Solid state drive can be a harder assignment as a result of their market requests. Anyway because of the innovation utilized behind the SSD is more proficient, the creation of SDD has risen. Which implies that sooner rather than later SSDs too can be discovered plentiful in the market.

 4. Life expectancy

 Another favorable position of utilizing a HDD is its life expectancy. A SSD has limited number of read/compose cycles which can be taken care of by the blaze recollections. Not at all like a SSD there is no glimmer recollections associated with HDDs. The information present on a hard circle drive is straightforwardly composed on the platter plates which regularly doesn't wear out. Consequently for the most part a life expectancy of a HDD will be more noteworthy.

 5. Non-Volatile

 All the unstable memory gadgets present on your PC will in general free its information once it is coming up short on power. Hence these kinds of recollections can't be utilized to stack working frameworks and dispatch applications. Maybe the answer for the non-unstable memory is the hard plate drive. A hard drive utilizes attractive platters circles for putting away informations. These plates have the capacity to recover the information in any event, when there is no force.

 1. Speed

 The speed of a hard drive rely on its Revolutions Per Minute (RPM). This can be likewise changed by various hard drive variations. Anyway a conventional hard drive will perform more slow contrasted with a glimmer memory fundamentally because of its mechanical nature. And furthermore the information present in them is divided. These implies that PCs that have introduced hard drives will encounter more slow boot times and record moves.

[allhdd2-blog]

The best server and networking hardware reseller in Texas

ALLHDD.COM is a merchant based in New York, United States of servers and networking products offering competitive prices for all types of computer hardware specializing in server, storage solutions and related sub systems such as for Tape storage, Hard Drives, Server and Networking gears including switches, routers, gbic, hub and modules. ALLHDD.COM is a company that supplies thousands of server and networking spare parts from nearly 450 different manufacturers and distributors including HP, Cisco, IBM, Dell, SUN, Qlogic, Emulex, Toshiba, Western Digital, Lsi Logic, Intel, Samsung, Seagate, Hitachi, AMD, Lenovo, 3Com and more. We are experienced in our business over 240,000 customers around the world trust ALLHDD.COM to deliver undertaking vital hardware on time. Address: 9229 Queens Blvd Ste. 2GRego Park, NY 11374Phone: 718-766-5269 website: cheap hitachi hard drive/

[sadoze-blog]

THE BEST CAR SEAT COVERS TO PROTECT YOUR AUTO UPHOLSTERY

Research The Best Cordless Drill & Impact Drivers For the Money

If you’re weaving through the endless cordless drill reviews, then read on.. What you won’t find on this site are reviews on cheap drills. Lousy under-performing tools aren’t worth the aggravation and don’t belong in anyone’s tool-shed.

 Wanna buy a cheap cordless drill that will make anyone want to jump off a cliff?

check out this piece of crap –the WORKSITE Cordless Drill – it’s guaranteed to piss someone off!

The Best Cordless Drill: See our Top 7 from each category

We’ve compiled a list of top-rated cordless drill driver brands from each category to make the buying process easier for you.

 So take a seat, grab a coffee (or beer) and enjoy the countless hours of research and hands-on tests we’ve done and feel free to email us with any questions you have.

 #1 The Best 20v Cordless Drill: DEWALT DCD795D2

Dewalt DCD795D2 ReviewThe DeWALT cordless hammer drill features a smooth running brushless motor. It provides 57% more run time than the standard motor. It has two speed transmission that is high speed with three different drive modes. It comes with a 1/2 inch ratcheting, keyless chuck. It has an ergonomic handle that ensures a better grip with a balanced feel — it feels super light and comfortable to use. The kit includes two XR Li-Ion batteries, a charger, and carry case that hold the entire kit and in my opinion – it’s the best 20v cordless drill for the money.Research The Best Cordless Drill & Impact Drivers For the Money

best cordless drillbIf you’re weaving through the endless cordless drill reviews, then read on.. What you won’t find on this site are reviews on cheap drills. Lousy under-performing tools aren’t worth the aggravation and don’t belong in anyone’s tool-shed. Wanna buy a cheap cordless drill that will make anyone want to jump off a cliff?

 check out this piece of crap –the WORKSITE Cordless Drill – it’s guaranteed to piss someone off! It doesn’t have to be expensive to be the best drill!

See Our #1 Cordless Drill Combo kit that has a 4.8 out of 5 stars rating and nearly 400 customer testimonials. Don’t be disappointed and get the most for your money by choosing the right tool for the job… What Type of Cordless Drill is Best for You? Cordless DrillImpact Driver Screw GunScrewdriverHammer DrillRight Angle Drill

Dewalt DCD795D2 ReviewThis is the most commonly found power tool in any workshop, garage, or construction site. It’s one of the first power tools a woodworker should own. It has enough strength to drill and drive screws into thick planks of wood. It is the quintessential tool for those who enjoy projects around the home.

best cordless drillWe’ve compiled a list of top-rated cordless drill driver brands from each category to make the buying process easier for you. So take a seat, grab a coffee (or beer) and enjoy the countless hours of research and hands-on tests we’ve done and feel free to email us with any questions you have.

#1 The Best 20v Cordless Drill: DEWALT DCD795D2

Dewalt DCD795D2 ReviewThe DeWALT cordless hammer drill features a smooth running brushless motor. It provides 57% more run time than the standard motor. It has two speed transmission that is high speed with three different drive modes. It comes with a 1/2 inch ratcheting, keyless chuck. It has an ergonomic handle that ensures a better grip with a balanced feel — it feels super light and comfortable to use. The kit includes two XR Li-Ion batteries, a charger, and carry case that hold the entire kit and in my opinion – it’s the best 20v cordless drill for the money. Full Review

 This is the best drill for home use that does all that it claims to do. It goes through concrete and masonry with ease. It is a very lightweight hammer drill making it an easy hammer drill to wield. It has nice user features like the multi-speed and multi-mode transmission. The LED light is super bright and helpful in dark spaces. There are few complaints to be had about this power tool. The quality of the tool far exceeds the price.

#2 The Best 18v Impact Driver: Makita 18v Lxt

Makita impact driverThis is a compact, cordless impact driver that features a brushless motor. It is a four speed motor with a Quick Shift mode for fastening control. Other special features of the Makita are the integrated modes that ensure proper fastening. The Assist Mode, and Tightening Mode control the speed and torque of the motor to prevent breakage, stripping, and damage to your working material. It’s a powerful impact driver that can tackle even some of the toughest lag bots.

#3 Dewalt 20v DCF620B Max Brushless ScrewGun

DEWALT DCF620B 20-volt MAX XR Li-Ion Brushless Drywall ScrewGunThis cordless screw gun has 4,400 rpm brushless motor. It has a three year limited warranty, one year of free service, and a 90 money back guarantee. The DeWALT built motor ensures the maximum amount of runtime. The DeWALT features and ergonomic design that gives it more balance than the corded models. The lock-on nose cone locks securely yet removes easily. It has an attachment for you to add a collated magazine.

 This is a specialty tool geared towards those that are drywallers – it’s pretty much a useless drill outside of installing sheetrock.

#4 Hitachi DB3DL2 3.6 V Dual-Position Cordless Screwdriver Kit

Hitachi DB3DL2 3.6 V Dual-Position Cordless Screwdriver KitThe Hitachi cordless screwdriver utilizes a dual position handle that switches from straight to the pistol position to maximize the versatility of the tool. It has lithium-ion powered batteries that have a life three times longer than the standard battery life for a cordless screwdriver. The quarter inch hex chuck is designed for quick bit changes. It’s a compact and lightweight design measuring less than 11 inches in length and weighing a pound. There is a built-in LED light to illuminate your work area. The Hitachi cordless screwdriver comes with a lifetime tool warranty and a two-year battery warranty.

#5 Best Cordless Hammer Drill: Milwaukee M18 2605-20

Milwaukee M18 FUEL Hammer DrillThe Milwaukee 7/8” SDS Plus Rotary hammer drill packs an impressive 1.8 ft-lbs of impact energy. It has a powerful and dependable brushless motor. It is an 18V drill that is one of the most compact drivers of this type. The REDLINK PLUS feature prevents over-discharge, overloading, and overheating. It has a ratcheting lock chuck to secure your bits. The ergonomically designed handles and grips absorb shock to give a secure and comfortable grip.

#6 Milwaukee 2615-21CT M18 Cordless Right Angle Drill Kit

Milwaukee 2615-21CT M18 Cordless Right Angle Drill KitThe Milwaukee right angle drill is the most compact drill on the market measuring less than four inches in length. It has 12 torque settings and features one of the first electronic clutches on the market. The kit includes batteries, a carrying bag, and the multi-voltage charger that takes both the M18 and M12 batteries. There is an onboard fuel gauge for the battery as well as an LED light.

Cordless drill reviews: The only buyer’s guide You need.

From fine woodworking to heavy-duty constructions, power drills can make just about any task much easier. The fact that they can be adapted to most tasks (using bits) also makes them highly versatile, something that has only improved with the advent of a cordless drill. It’s safe to say that these are an absolute must-have for any toolbox, which means you’ll be looking forward to purchasing one if you haven’t already done so. Since these tools come in many different varieties, it’s very important that you know what to consider when reading various reviews.

 Brushless VS a Brushed Motor

Brushed motor vs brushless motor comparisonIn both brushed and brushless motors, magnets are what produce the rotary motion of the shaft. The means of power delivery is what sets apart these two types, with the former utilizing carbon brushes for this task. The latter make use of internal circuitry to create a revolving magnetic field, which effectively eliminates the need for brushes.

 Mode of operation aside, the most important point to note is that brushless motors are more efficient and more powerful than their brushed counterparts. Drills that rely on these motors also tend to produce less friction and heat when in use. Still, drills with brushed motors are usually cheaper, which is something you’ll want to consider if you’ll be using yours for minimally-intensive tasks.

 Read our in-depth article on Brushed vs Brushless – to understand why it’s important to buy brushless drills.

 RPM and Torque

how to adjust speed settings in a cordless drillShort for rotations per minute, the RPM figure is what indicates the maximum speed achievable by a particular drill. Most low-end models provide at least 2 options here (usually 300 rpm and 800 rpm) plus a slide switch to allow users select low or high speed. These are best suited for light-duty tasks, but torque must also be taken into account when comparing speeds.

 Torque refers to the rotary turning force of the device. Basically, the more torque a drill has, the better its ability to drill into hard surfaces. Choose low speed drills if this is what you have in mind, or those on the higher side of the RPM scale if you’ll mostly be boring holes.

 Clutch

16 torque settingsAlso known as torque selector, this feature minimizes the likelihood of overdriving or snapping screws. More specifically, the clutch is what disengages the drive shaft when a certain level of resistance is attained. While most cordless drills have an adjustable clutch, the number of settings available varies across models. Experts recommend choosing a device with a wide range so you can fine-tune the drill’s operation. Popular opinion dictates that a decent device should have at least 24 clutch settings. Although you won’t need such a diverse range for basic tasks, it will make it easier to tailor the drill to the material(s) you’ll be working with.

 Chuck

how to adjust the chuck on a cordless drillThis is the part of the device that holds the rotating bit in place. A good chuck should hold the bit securely without any wobble, but it’s also important to check the size before purchasing. Unless you’ll mostly be drilling small holes, look for a 13mm chuck that will be able to hold larger bits. This would especially be crucial if you’re likely to take on heavy-duty projects in future.

 Also remember to check out keyless chucks — these have metal prongs to allow users loosen and tighten them easily without having to use keys. The fact that they can hold most bits also makes them ideal for general-purpose drilling. Another design that makes it easier to change bits is the hex chuck. Although they only work with hexagonal bits, hex chucks are well-suited for drilling hard materials and less likely to slip.

 Battery

flex 20volt dewalt batteryA cordless tool is only as good as its battery. In other words, the reliability of your power source can make the difference between a good day’s work and having your drill run out of juice when you need it the most. It’s thus crucial that you invest in a battery that will be able to hold its charge for long enough, besides generating power at high levels of efficiency.

 Drills with such batteries will always carry a higher price, but they weigh less and run longer on a single charge than devices relying on older power sources. Speaking of which, most old-school chargers can take up to 5 hours to fully recharge a battery, while their modern ‘smart’ counterparts will only take an hour at most. You’ll also want your drill to have a battery gauge so you always know how much power you have remaining as you work.

 The Material You’re Drilling

Cordless drill in actionBefore heading out shopping, take time to think about where the tool will be used more often. For woodworking, the smaller models (specifically those in the 12V range) will be well-suited for most tasks. Only go for larger drills (18-20V) if you’ll be boring large holes or using a hole saw.

 If you work with metal, try to go for as much power as you can afford. Keep in mind that most models are only capable of drilling light metal, which means you might have to look for something better suited for heavier applications. If you’re a mason, what you should be looking for is a cordless hammer drill. Thanks to its high-speed hammering action, a tool in this category will comfortably be able to bore through concrete and stone.

 What’s the Difference between NiCad & Lithium Batteries?

These two represent the most popular battery choices on the market today, the older of wich is the nickel cadmium (NiCad) variety. Besides being relatively inexpensive, NiCad batteries are also quite durable, with some having the ability to withstand 1000 charge cycles. However, their poor energy density means these batteries have to be recharged often. In addition, there has been a number of concerns with regards to the toxic chemicals commonly used in the manufacture of these products.

 This is perhaps the reason why lithium-ion (Li-ion) batteries have emerged as an alternative power source for cordless tools. Compared to NiCad batteries, these are made using lighter materials and have twice the energy density. The latter makes them excel at delivering high-range power over a single charge. All these benefits come at a price, which means you’ll have to part with more when purchasing drills with Li-ion batteries.

 Which Drill Voltage Should I choose? 12V, 18V, 20V, 36V?

Generally speaking, the higher the voltage of a power tool, the more the torque it produces and, as a result, the more you’ll have to pay for it. While most power tools have voltages falling between 3V and 48V, cordless drills shrink this range to 12-36V. On most models, the voltage will be indicated by a figure printed on the side of its battery.

 As for your choice of voltage, this will ultimately depend on the kind of projects you take on. For light tasks, consider buying a low-voltage model, which would be the 12V in this case. Opt for an 18- or 20-volt drill if you’ll be tackling some heavy-duty tasks, or even a 36V tool if you need to drill large holes quickly or drive huge fasteners. It’s also worth noting that voltage also affects weight, so expect high-voltage tools to weigh more.

 What Does The “ah” Mean in Cordless Batteries??

‘Ah’ is short for ampere hours, and is used to indicate the capacity of a particular battery. A high-capacity battery will generally outlast one with a lower Ah rating, but there are a few exceptions. For this reason, make sure you go through our reviews to see where a particular model falls in battery performance tests.

 Also keep in mind that high-capacity batteries will always be heavier than their smaller counterparts. As such, you’ll have to take portability into account when figuring out how long you want your battery to last between charges. A battery with a high Ah rating will also take longer to charge. Depending on the application(s) you have in mind, look for something that balances all these elements, of course taking your budget into consideration as well.

 What does Variable Trigger Speed Mean?

how to adjust speed settings in a cordless drillBasically, a variable speed trigger is a switch that allows you to select different speeds depending on the task at hand. On most models, this feature is made possible using a range of gears. While drills with variable speed settings generally offer more versatility, it’s important to choose one that offers great control at all speeds.

 In other words, your drill should be easy to operate and provide sufficient variable control. For more delicate tasks, opt for a model that has a 2-speed switch as well as a trigger with variable control. This way, you’ll be able to vary the speed from barely rotating to the top of each range.

 Whether you’re a hobbyist or professional craftsman, rest assured that there’s a drill on the market that’s just right for you. As you shop, be sure to consider what you’ll be using the tool for, the materials you frequently work with, as well as any challenges you might encounter when tackling a project. Keep in mind that price doesn’t always go hand-in-hand with quality and performance, so try to compare as many drills as you can so that you can find the best cordless drill for under 150, 100, 75 and 50.00 to suit your needs.

[shirlleycoyle]

How Sony Forged, Then Squandered, Its Relationship With Linux Users

As companies innovate over time, they inevitably take things away. In the case of Apple’s M1 chip, for example, it took away the ability to upgrade basically anything.

As I wrote last year, the Apple Silicon shift is not its first move away from a CPU architecture, but its third, and the parallels between the transitions from PowerPC and Intel are interesting to watch in real time. Now, while it was the most influential company that offered PowerPC computers for sale, it was technically not the largest—not by a long shot.

The winner was technically the Nintendo Wii, which sold more than 100 million units during its seven-year history on the console market, all while rocking a variant of the PowerPC G3 processor line used in many early Macs. And it wasn’t alone: The Wii’s primary competitors in home video games at the time—the Xbox 360 and the PlayStation 3—also used architecture based on the PowerPC.

The PlayStation 3, while it did not best the Nintendo Wii, may have bested Apple at making the most popular PowerPC platform intended for a degree of general purpose computing … well, until Sony, under duress, threw that crown away.

Let’s talk about the complicated nature of Linux on game consoles—a story that gets particularly complicated when the discussion turns to what Sony did on the PS3.

Why Linux has always found a home on video game consoles

As operating systems go, Linux is a chameleon, one that can be installed on architectures both incredibly mainstream and absurdly obscure.

One architecture in the obscure category is SuperH, a chipset released by Hitachi in the 1990s that was used in three of Sega’s consoles—the 32X, Saturn, and Dreamcast—and not many other places. Where it appeared, however, made a compelling case for a powerful 32-bit chip, one capable of powering Virtua Fighter and Crazy Taxi alike.

Despite the fact that SuperH (also known as SH) hasn’t seen an architectural update since the mid-2000s, its compressed instruction set approach to code directly inspired the evolution of modern ARM processors (to the point where ARM literally licensed the functionality from Hitachi), meaning that it has maintained a degree of relevance in the modern day.

And a number of Linux developers have helped to carry SuperH into the modern age after the chipset’s patents expired about five years ago.

“We didn’t have to write new code; we just had to dig some of it up and dust it off,” said Rob Landley, one of the developers that led the effort to revive SuperH as an open architecture under the “J-core” name.

Chipsets like these would be forgotten about if not for Linux helping to push them forward.

And often, this means that you can find Linux implementations for video game consoles (admittedly, of varying age and quality). The Dreamcast is a good example. With the device sporting a VGA port, a first-party keyboard, and an optional Ethernet adapter, it has a lot of the elements that could make it a good choice for installing some form of Linux. And well, people have. It’s not going to be as updated as an implementation on an x86 platform, or even a Raspberry Pi or Pine64 device. But in many ways the fact that it can be done at all makes it interesting to some.

Among common video game consoles, probably the earliest you’ll find a working Linux variant for is the original PlayStation, which relies on a MIPS architecture. But expect to do a lot of digging on old forums or in the Internet Archive for a copy, as it was released in 2001 and the sites that hosted it are long dead.

There have even been attempts on the Nintendo 64, though they started slowly.

Back in 2016, a guy named Alan Williams shared a YouTube clip that featured StarFox 64 getting overwritten on the screen using a GameShark to boot into a version of Linux … that immediately kernel panicked. That it displayed anything at all is impressive—this is challenging work, as shown by the fact that Alex Thorlton, a Linux kernel engineer who actually worked for SGI (the company that produced the N64 architecture) back in the day, recently tried doing the same thing in an emulator, and had to do a ton of research ahead of time to figure out what could be done.

And all that work built up to something tangible: At the very end of last month, as a Christmas present of sorts, a version of Linux for the Nintendo 64 was unofficially released by developer and Linux kernel contributor Lauri Kasanen. If you have a flash cart and a desire to see a terminal on the device you played GoldenEye on, you can find it on GitHub.

And to be clear, we’re not talking about polished Live CD variants of Linux here, but code that you have to compile yourself. (If you’re lucky, maybe you’ll find a port of Debian.) As the motivations of the console manufacturers was to prevent theft or cheating on their systems, these are not particularly easy endeavors. Modding might be required, or exploits of the original hardware, such as what Williams did.

With systems this old, it’s likely that people are messing with Linux out of personal curiosity or a desire to improve their technical skills, rather than a professional need.

But by the time of the sixth console generation, Linux development on video game consoles became less of a curiosity and more of something that could be genuinely usable. There were two reasons for this: One, the fact that the original Xbox was effectively a stock x86 PC with a fancy design—meaning that standard Linux distributions could run on the machine—and two, a downright shocking willingness by Sony to open up its PlayStation 2 to end users.

It was nice for a while, but eventually the door was bound to shut again.

$299

The cost of the PlayStation 2 Linux kit, which allowed owners of the device to use a variant of Linux on their system. Unlike a modern computer that could be booted from a USB drive or CD-ROM, the PS2 required a proprietary kit that was compatible with the company’s MIPS-based Emotion Engine chipset, and specifically blocked off access to the DVD drive, except for PlayStation games. This kit included a keyboard, mouse, VGA adapter, an ethernet adapter, and a hard drive, and additionally required an 8 MB memory card for installing the operating system. It made the system functional as a programming platform, though game-makers could only develop games for other people with the Linux kit, a very small portion of the total install base of the PlayStation 2, still the best-selling console of all time. (The Linux kit itself, however, is exceedingly rare, and sells on eBay above its original list price today.)

An example of Sony’s PlayStation 2 Linux kit, which uses the NeXT-inspired Window Maker interface. Image: Colin Keigher/Wikimedia Commons

Sony’s surprising openness to Linux on the PlayStation … at first

It’s really fascinating to consider that Sony, the company whose competing interests in content and hardware have likely played the biggest role in the rise of digital rights management, that once literally installed a rootkit on people’s computers, was so willing to give Linux a first-class citizen status on its consoles.

It feels like it shouldn’t be in Sony’s DNA, right?

But Sony had tried to leverage its position as a video game player to help build goodwill among developers, and adding Linux support to the PlayStation 2 was a good way to do that. It also helped that Sony had developed a development kit for the original PlayStation called the Net Yaroze, with the goal of helping to spur interest in development among hobbyist communities. (This was in sharp contrast to Nintendo’s traditional stance, which often discouraged unlicensed development.)

It was a good idea—and Sony’s move to block off the DVD-ROM drive, while limiting the console’s capabilities as a Linux machine, seemed like a fair compromise.

But then, when Sony released its follow-up to the PlayStation 2, it did something unexpected: It included a way to natively boot into alternative operating systems. The PlayStation 3 included a functionality called OtherOS, which allowed for easy booting into other operating systems. Why was it possible to use a Live CD with the PlayStation 3 but an unacceptable risk with the PlayStation 2? It comes down to how the boot process was implemented. Simply, it used virtual machines, which were supposed to limit access to the full system. As you may know about virtualization, it naturally comes with a performance hit—but the belief was it would keep the PS3 secure while still allowing for non-gaming use cases.

With Playstation 3 devices capable of running PowerPC-based variants of Linux such as Yellow Dog Linux, it created opportunities to stretch the console into use cases that took advantage of its unique multi-processor Cell architecture, which was seen as potentially beneficial in supercomputing applications. After all, a PS3 might have been expensive for a video console upon launch, but it was cheap as the basis of a supercomputing cluster. Its main CPU unit was faster than the CPU in the last-gen PowerBook, but also had a number of co-processors called Synergistic Processing Elements that, together, helped the architecture dwarf many personal computers at the time … in software that could take advantage of it.

It was a bet by Sony (and by extension, its chip supplier IBM) that it had created something so epic that it could draw in the technical community, along with potentially the next generation of developers. In a community Q&A with Slashdot, the president of Sony Computer Entertainment Worldwide Studios, Phil Harrison, said that the goal was to make room for developers to have a way to learn skills using real hardware, to encourage their improvement. He cited his own growth when doing the same thing with the Commodore 64, how it allowed him to try new things while still trying to learn how to program.

“Now, those industry doors are largely closed by the nature of the video game systems themselves being closed,” he said. “So, if we can make certain aspects of PS3 open to the independent game development community, we will do our industry a service by providing opportunities for the next generation of creative and technical talent.”

That’s all well and good, but there was still a rub: “Now having said all that, we still have to protect the investment and intellectual property rights of the industry so we will always seek the best ways to secure and protect our devices from piracy and unauthorized hacking that damages the business.”

And, unfortunately for everyone involved, that’s exactly what happened. And Sony did not look good by the end of it.

“One of our key objectives with the new model is to pass on cost savings to the consumer with a lower retail price. Unfortunately in this case the cost of OtherOS install did not fit with the wider objective to offer a lower cost PS3.”

— A message from Sony discussing the company’s decision to remove OtherOS from its PS3 Slim models. Despite the decision not to support Linux in later versions of the PS3, Sony emphasized ongoing support for OtherOS at the time, according to The Register: “SCE is committed to continue the support for previously sold models that have the ‘install Other OS’ feature and that this feature will not be disabled in future firmware releases.” That sound you hear is a broken promise.

The “fat” edition of the PS3, which had the OtherOS option available. Image: Evan Amos/Wikimedia Commons

Why Sony’s attempt to turn the PS3 into a computer turned into a case of corporate self-sabotage

Sony talked a big game upon the launch of the PS3, particularly when it came to whether the console was “hackable.” Sony very strongly implied it was not.

And for more than three years, that seemed to be the case. Well, until a hacker with a reputation decided to take a swing at it. The result killed Sony’s Linux efforts almost immediately and hurt the company’s homebrew-friendly reputation almost overnight.

The hacker that first found a way into the kingdom was Geohot, a.k.a. George Hotz. Hotz had gained a reputation as a master hacker after being one of the first to unlock and jailbreak an iPhone, and took it upon himself to find ways to exploit the console, which had a reputation for being tough to hack.

It took Hotz about five weeks to find a workaround, something he documented on a blog. The vulnerability, as you might guess by the fact that I’m writing this, involved the use of OtherOS. In a blog post revealing his success, he described how he attained hypervisor-level access to the system’s processor and full access to the system memory.

“Basically, I used hardware to open a small hole and then used software to make the hole the size of the system to get full read/write access,” he told The Register. “Right now, although the system is broken, I have great power. I can make the system do whatever I want.”

Geohot noted that in his initial announcement that there was a risk that Sony could remove features to rein in the hack.

“As far as the exploit goes, I’m not revealing it yet,” he wrote. “The theory isn’t really patchable, but they can make implementations much harder.”

He soon did release details on the exploit, and Sony responded with an aggressive firmware update. With Version 3.21 of the PS3 firmware, the company removed support for OtherOS entirely, citing security reasons, and informed users that if they did not agree to the upgrade, they would lose access to the PlayStation Network, games that relied on newer firmware, and access to copyright protected videos.

And because Sony apparently had no sense of irony, they literally released the update on April Fool’s Day in 2010.

(Side note: Poor Yellow Dog Linux, whose developers had banked its future on OtherOS being accessible … and were the first to reveal Sony’s plans to update the firmware.)

The loss of access to Linux on the PS3 didn’t affect most regular gamers, but the ones who were technically oriented were upset—and this slowly led to an escalation of energy against Sony in trying to break into the PS3.

Geohot played a role in this escalation—for example, helping to restore the OtherOS feature just days after Sony removed it. But he wasn’t alone. Others joined in, too.

Eventually, Sony brought in the legal team to take on Hotz, suing him and a secondary group, fail0verflow, for their efforts to jailbreak and reverse-engineer the console.

 Hotz, at least at first, took the lawsuit in stride, posting a music video on YouTube where he rapped about the case, with a flow highlighting the fact that he is clearly a polymath.

But the legal action took some dark turns; at one point, a judge approved a subpoena that gave Sony access to the server logs and IP addresses of anyone who accessed Hotz’s blog, the one that detailed his exploit efforts. If it seems like it was over the top, that’s because it was.

Sony eventually settled with Hotz, who wrote this in a statement about the settlement: “It was never my intention to cause any users trouble or to make piracy easier. I’m happy to have the litigation behind me.” Some, such as the Electronic Frontier Foundation, took it to be something of a gag order.

(Hotz later took his hacking abilities into the startup space, launching the artificial intelligence startup comma.ai, which specializes in autonomous driving solutions.)

This decision to go after Geohot cost the company goodwill for years afterward.

As Sony had specifically marketed the first model of the PlayStation 3 as having this ability to boot into Linux, it meant that some tinkerers spent hundreds of dollars on the machine for a feature they could no longer use. Perhaps it wasn’t the PS3’s primary use, but it nonetheless gave it daily-driver capabilities for some. You literally could get work done on a PS3, which had hardware that was pretty good for its day, so good that some out there feel that the Cell architecture was never truly utilized in full. One day, all of it was gone.

This created a mess of legal action, as people sued over losing access to something that a subset of them really liked. It was like Sony had shown that it cared about the little guy, but as soon as the little guy did something it didn’t like, it pulled the rug out.

(One point of irony here: Not long after Sony sued Hotz claiming violations of the Computer Fraud and Abuse Act, the company faced a class-action suit accusing the company of violating the same law.)

Ultimately, the company agreed to a settlement, which took a few detours, but ultimately led to a class-action settlement for the roughly 10 million people that bought the original “fat” edition of the PS3.

That long-running class-action lawsuit could have been avoided had Sony taken another approach to handling OtherOS. It was as if all of the good things the company had done to embrace homebrew development had been forgotten overnight by a corporate culture arguably too focused on piracy, and people instead looked to the negative stuff like the heavy DRM and the rootkit scandal, and offered a heavy-handed dose of payback in the process.

Geohot’s formative efforts in jailbreaking the console eventually led to more in-depth hacking efforts by others that took the mantle, as Sony’s decisions made the PS3 a target. By 2012, a series of codes were released that allowed for the installation of custom firmware. To this day, you can mod an old PS3 to access (an admittedly older version of) Linux, and you can even do so with low-level hardware access OtherOS didn’t offer.

Sony’s efforts to stop its console from getting hacked led to it getting hacked more thoroughly than it might have … had it left Geohot and his blog alone.

five

The number of miles of wire that were used to connect the more than 1,700 PlayStation 3s used in the Condor Cluster, a project built by the U.S. Air Force to take advantage of the console’s supercomputing capabilities. As The Verge notes, many of the consoles used in the effort were sold directly to the Air Force by Sony after the company removed them from the market after the firmware update fiasco.

I think the lesson here is that people will hack your system no matter how many barricades you put up against it. Or at least try to.

There will always be folks who find ways to unlock the Nintendo Switch with pieces of 3D-printed plastic and paper clips.

But hacking requires motivation. In the case of the Switch, it is a console that looks like it can run Android really well, and some people want that. Geohot’s motivation was that the PS3 somehow managed to survive unhacked for more than three years, and after the iPhone, he was looking for a new medium to conquer. But the average user, if they’re even aware of hacking, often just wants access to additional capabilities—and not just for reasons of piracy.

Perhaps the company that has managed to find the perfect type of middle ground to this situation is Microsoft. The just-released Xbox Series S already has open-source emulation software on it, thanks to a move that Microsoft did starting with the Xbox One to make the platform more welcoming to developers: Any console can be made into a development console, as long as you’re willing to pay the $20 for that right.

As the console-modding-focused YouTuber Modern Vintage Gamer noted in a recent video, this decision effectively removed many of the motivations for exploiting the Xbox One or Xbox Series architecture for those who want to screw around or learn. But it does so in a way that limits the system from being used in nefarious ways. It’s a church and state split: You can’t run a retail game in Dev Mode, nor can you run homebrew software in retail mode, and the apps that the Xbox supports in dev mode don’t allow low-level access to the hardware, meaning you’re leaving some performance on the table.

Nonetheless, the result is that on day one of the Xbox Series S being in stores, it is possible to run some really powerful emulators on the new consoles—which is honestly what hacked consoles are often used for anyway. And for the Geohots of the world, Microsoft has implemented a bounty program to convince them to use their skills for good. (Sony recently followed suit.)

Thanks to programs like these and notably strong security mechanisms, the seven-year-old Xbox One has yet to be jailbroken in a serious way, despite a hacking incident before the console’s launch that involved the theft of sensitive information related to the device.

Compare this to what happened with the PlayStation 3, where Sony’s decision to remove a developer-friendly feature eventually led the system to face more dramatic exploits than even Geohot was ever able to pull off himself (though not because of a lack of trying).

These days, PlayStation 3s are a common sight in e-waste settings, just like the Wii and the Xbox 360. The slim models and the fat models alike show up there in various states of disrepair. It would sure be nice if they could still be used for something.

One has to wonder if Sony could have figured out a way to de-escalate things.

How Sony Forged, Then Squandered, Its Relationship With Linux Users syndicated from https://triviaqaweb.wordpress.com/feed/

[con321]

I guess I have to buy another hard drive

I just don’t wanna go anywhere..

https://allegro.pl/oferta/dysk-twardy-3-5-hdd-3tb-sata3-7200-obr-64mb-8520025319

https://allegro.pl/oferta/dysk-twardy-hdd-wd-500gb-sata-iii-3-7200-6695307150?bi_s=ads&bi_m=showitem%3Aactive&bi_c=Y2FtcGFpZ24AMjA1MDM3NTMAMTM4NTQ1AA&bi_t=ape&referrer=proxy&emission_unit_id=5b8e4512-6520-4fc0-869b-611c644a9b37

or I could just put few smaller ones in raid

maybe I should just.. defragment HDD

so.. I have 2 free sata ports

so like.. only 2 sata ports..

like.. 2 times 1.5TB or sth

there are 2TB ones also.. price looks interesting

but I don’t want to spend extra buying 2 of them

damn.. I actually.. I guess I wish I would get 2TB instead of higher capacity.. so I could.. like.. make a raid.. I wish I bought smaller capacity drive instead so I could stack them in raid

wow I found some really cheap 1TB hard drives.. segate like mine

damn so cheap

1TB is more popular.. so it’s cheaper

I wish it was 1.5TB bc I only have 2 free sata slots.. and I need one more cable for sata

segate is fast. 160MB/s

I already have 1TB but it’s slower speed.. it’s 2.5″ HDD and it’s slower.. it’s like 80MB/s

so I can’t use raid on it bc it would slow down whole raid.. by 50%. so it wouldn’t be any faster if I added 1 more HDD

I need motherboard with more sata ports.. I could get a pcie card.. but I could only add 1 more sata.. port I guess?? because it’s pcie 2.0 x1 so it’s only 500MB/s

or sth.. idk..

hard drives use only 160 MB/s so.. like.. idk if I could connect more sata ports to this pcie slot

https://allegro.pl/oferta/kontroler-pci-4xsata-raid-chipset-silicon-sil3114-8752391305?utm_feed=aa34192d-eee2-4419-9a9a-de66b9dfae24&utm_source=google&utm_medium=cpc&utm_campaign=_ELKTRK_PLA_Komputery&ev_adgr=Inne&gclid=CjwKCAjwh7H7BRBBEiwAPXjadia-j9tkrNFJPqwjBZdgh-dLD7gHSAAlxUvfLsuHuIjYg1KY46uvQxoCeDcQAvD_BwE

it works with x1, x4

“raid 5 support”

sata 1.0 only.. 150MB/s

the speed would be like. 130 or sth

but I could connect 4 of them. and.. so it would be like.. 390MB/s

pretty good

if I connected 3x 1TB

but they would be loud. they would use more power.. but mostly they would be loud and heat more

and I would need controller 

or.. I could like.. idk.. I guess I could.. idk.. if I removed 1TB hard drive.. 2.5 this slow hard drive.. I could put 3 1TB 

without need of the card.. they would still use more power and be loud.. and.. it kinda would increase risk by 3 times.

I never had hard drive failure so far.. 

but.. like.. where is the information... of the drives stored.. like.. if it’s stored on the drives.. so like.. if I get URE on this piece of information then all the data is lost

https://youtu.be/x533qY_Fhk0?t=117

how can I lose all data on a single hard drive..

okay. I see.. strips.. so it means that data is also more defragmented..

I see.

now I see how it works

so it’s pretty much safe

the risk is 2 times higher

I’m trading safety for speed

like.. if one hard drive dies completely.. which I never experienced ever..

I would just get 1.5TB x2 hard drives

but I think that 1TB & 2TB are more popular.. so there’s gonna be more good offers on 1 & 2TB

“used 20k hours” is that a lot?

that’s 2 years

I found 1.5TB drives

but I also saw 2TB

3TB couldn’t find any cheap ones

wow.. 75 000 hours.. so I guess 20 000 hours is not as much 

my hard drive is only 6k hours

so like.. 75k hours.. that’s a shitton

I bought it like.. 1 year ago I guess.. 1.5 year or 1 year

but I already feel like it’s been though a lot

https://hdd.userbenchmark.com/Compare/Hitachi-HUA723020ALA640-2TB-vs-Seagate-Barracuda-1TB-2016/m8994vs3896

the problem is also.. that they reduce speed if I have one slower hard drive..

so I need all of them to have the same speed

or I lose speed

damn... so if I put 2 of them.. lets say they have.. it’s hard to find the ones with 160MB/s speed.. mostly they’re 120MB/s

but that’s still better. 120 x2 = 240. so it’s 33% faster

damn.. I need to find 160MB/s ones

but I saw only 120 so far

idk. they’re gonna use more power and will make more noise.. this 3.5″ hard drive is quite noisy..

it’s one of the noisiest parts in my pc.. almost as loud as this 1400 rpm cpu fan

[proscenic2019-blog]

How to Vacuum Car Like a Pro?

When was the last time you vacuumed your car? Did you know there is more benefit than just cleaning up the crumbs? Keeping your car clean will help keep your clothes clean when you’re in the car. It can also eliminate odors, remove allergens, and prevent abnormal wear. This will improve the desirability and value of your car when the day comes to sell it.

Choose the Right Car Vacuum Cleaner

Don’t fall into the trap of looking for the cheapest option. You need quality equipment to assist you in doing a thorough job. Stick with a well-known name brand that has been around for a while.

1. Look for a Quality Car Vacuum Cleaner

The lesser-known low-cost options tend not to be as good quality. This will result in your replacing your vacuum more often. Cheap vacuums also won’t have the same cleaning strength to get the deeply embedded dirt.

One brand you can trust is Proscenic. Founded in 1993, they have a well-established history of producing innovative and high-quality vacuums. Well-established home appliance companies like Philips, Hitachi, Panasonic, and Zojirushi trust Proscenic for their R&D, manufacturing, and sales.

2. Do You Need a Cordless/Portable Car Vacuum Cleaner?

Where do you plan to vacuum your car? If it isn’t near an electricity source, then you’ll need a portable car vacuum cleaner. Look for one with a long run time or interchangeable batteries. If the vacuum dies mid-cleaning, you’ll get stuck waiting for hours for the vacuum to recharge.

3. Do You Need a Wet/Dry Car Vacuum Cleaner?

Do you live in an area that will cause you to get the inside of your car wet? This could be from ice and snow in the winter. Or from a day at the beach in summer.

A wet/dry vacuum is required to clean up these types of messes. You will damage a traditional vacuum if you try to use it to clean water and moisture.

4. Look for a Car Vacuum with Tools

To make the job easier, you need a vacuum with tools. At the very least you need an upholstery tool. This will help you clean your seats.

Before You Vacuum Car

Before you start to clean your car, there is some pre-work for you to do.

1. Open All of the Car Doors

By having all of the doors open, you have complete access to all of the crevices. Otherwise, you’ll need to open and close all the doors over and over again.

With the doors open, you can work your way through the car from one side to the other. Plus, you’ll encourage air to flow through the vehicle, which can clear out those musty and stale odors.

2.Gather the Trash

Start by cleaning out the trash and clutter. Bring a garbage bag with you for this step if your car has a lot of trash. Take a moment and find a better place for the items you’ve been driving around with.

3. Remove the Floor Mats

To do a proper job, you need to remove the floor maps. They are under your feet and consistently take the most beating. Take all of the floormats out in both the front and back of the car.

Vacuum the Car’s Interior

Now you can vacuum the interior of your car! Attach the brush to your vacuum and begin with the roof of your car. Work your way from the top to the bottom. The bristles will help knock things loose and work the dirt out of the upholstery.

1.Vacuum the Floorboards

Keep the brush attachment on the vacuum and move to the floorboards. The bristles will help dislodge the dirt and debris that has been ground into the carpet.

A round-shaped brush will let you get into the smaller spaces. A wider brush will give you more coverage.

If you don’t have a brush attachment for your vacuum, then you can use a separate soft-bristled brush. Work the brush over the carpet with one hand while you vacuum with the other.

Try to work the vacuum in all directions. Going back and forth in one direction won’t work the carpet well enough to get a deep clean.

Slide the front seats back as far as they will go to give you the most amount of room to work. The easiest method is to start at the center console and work your way out towards the door. Don’t forget to go along the seat track where debris tends to collect.

2.Vacuum the car Seats

The next step is to vacuum the seats and upholstery. Keep using the brush attachment as you work your way over the seats. Be sure to work the bristles into the cracks and crevices.

Fully recline the seats all of the ways back to expose more of the seat. This lets you clean between the seat bottom and back.

3.Vacuum the Car Floor Mats

Shake or bang your floor mats against something hard to knock loose the dirt in them. Then vacuum them to remove anything stubborn and fluff up the carpet fibers.

If you find that they are stained, use a cleaner to remove any spills. Then let them dry thoroughly before you put them back in your car.

If you have rubber all-weather floor mats, you can skip the vacuuming and rinse them with some soap and water. You can then wipe them dry before putting them back in your car.

4. Remove Bad Odors

If you’re struggling with odors, sprinkle baking soda on the fabric areas inside your car. Let it sit for a few hours. Vacuum it up, and you’ll have a fresh, odor-free interior.

Now that you’ve removed the bad odors, you can add an air freshener to give your car a fresh and pleasant smell. You have plenty of options, from “new car,” fruity, flowery, or even something woodsy.

5. Don’t Forget to Vacuum the Trunk or Dashboard

While you work your way through your car, it can be easy to forget the areas that aren’t upholstery or are hidden. Open your trunk and vacuum out this area. This will pick up any dirt or dust that’s been left behind from stowing items in there.

For the dashboard, this area can get dusty. Use a brush attachment to clean around the gauges, buttons, and dials. If you struggle to dislodge debris, you can use compressed air to knock it loose. This works great for those tight places where your vacuum doesn’t fit.

Final Tips

Don’t try to rush the process. It can help to break your car up into sections to make the job seem less overwhelming. Start with the driver’s seat area, then the passenger seat, then the back seat, and finally the trunk.

Skip those small handheld car vacuum cleaners that plug into the car. A battery-powered vacuum is going to have more power than these small vacuums.

Don’t forget the hidden areas such as under and around the pedals or under the seats. These are the areas where dirt and debris gathers.

Proscenic P9

Get your car clean by using the Proscenic P9. Needing just 180–240 minutes of charging time, you will have 45 minutes of power vacuuming time. This is plenty of vacuuming your entire vehicle.

The max suction of 15000Pa ensures you’ll remove everything from dust and dirt to large particles. You’ll also have a variety of tools to clean every nook and cranny. This includes two crevice tools, one mini motorized tool, and one soft dusting brush.

Vacuum a car like a pro with one of the best car vacuum cleaners, the Proscenic P9.

[ryadel]

Remo Recover - file and partition recovery tool for win and mac - Review

Today we'll review Remo Recover, a full-featured data recovery solution for Windows and Mac PCs. These kinds of products can be a life-saver for most users who don't back up their data on regular basis and therefore are used to work with single copies of their data files... which is among the worst possible things to do nowadays! Even though modern storage devices (SSD, USB pen drives and the likes) are definitely more reliable than before, there are still tons of possible threats that can easily compromise the integrity of our beloved files, such as: Accidental deletes, formats or other disk-based operations. Storage device corruption or permanent damages due to logical or physical failures. Viruses, malware/ransomware, and other malicious threats. ... and so on. Such scenarios are those where software tools such as Remo Recover become handy, being able to recover single documents (photos, videos, documents, archives and so on), as well as whole partitions. It can be configured to search for specific file extensions and/or to look on a particular region of the storage device(s). It's simple and minimalistic design makes it good even for non-tech users, and comes in two separate builds for Mac and Windows PC.

Remo Recover for Windows - Main Screen

Demo Version

The first thing we look at while doing a review is the demo version. Luckily enough, Remo Recover actually has one, even though you can only use it to scan what it can be recovered: to actually recover those files you'll need to buy a license, which -luckily enough - is quite cheap. Despite its limitations, the Demo Version is still very useful to properly test the product and see if it can suit your needs. To download the demo version, click here.

Editions and Pricing

Let alone the Demo Version, which basically acts as a read-only scan, Remo Recover comes in three editions for three different ranges of features and prices: Basic Edition, $39.97 Media Edition, $49.97 Pro Edition, $99.97 Basic Edition The Basic Edition is useful for Recovery of all type of files which are deleted or lost. As expected by these kinds of products, the Basic Edition will also allow the demo mode usage of all the advanced features specific for the (Media and Pro editions: this allows the user to seamlessly upgrade the tool in case a need for more advance recovery arises. Here's a list of Basic Edition features: Deleted file recovery, even after using “Shift+Del” Recover files emptied from recycle bin Choose and recover a variety of files using Raw search Media Edition Performs all that the Basic Edition does and adds enhanced support to recover Media (Photo, Video, and Audio) file types including RAW photos taken from digital cameras. Some of the Media Edition unique features include: Recover professional RAW Photo files Recover photos, videos and music files Create disk images to skip bad sectors Recover data from disk images created using Remo Recover Pro Edition It performs all that the Media Edition does and adds enhanced support for recovering lost data from accidentally formatted partitions, lost/missing partitions or when a partition is corrupt or deleted. Some of the Pro Edition unique features include: Recover data after Windows Re-Installation Add new file types for recovery using Raw Signature Search Recover data from accidentally formatted, re-formatted partitions Recover data from lost/deleted partitions (see recover partition for details) Recover data from re-partitioned drives

Remo Recover for Windows - File Explorer When you would want to use it Here's a list of some typical scenarios, user actions or external threats that could lead to data loss. Accidental file deletion or data loss Shift + Del on Windows or Cmd + Del on Mac Files getting erased while moving from one storage device to another Emptying Recycle Bin or Trash without having a backup Other related scenarios Formatting of storage devices Accidental formatting of SD card on camera or phone Facing errors like "Drive is not formatted, would you like to format it now?" Disk initialization error when camera SD card is just inserted Quick formatting of hard drive Full formatting of storage device Improper handling Reset device to factory setting Camera getting turned off while write process is being carried out Using the same storage device in multiple computers Improper ejecting of HDD or removing the SD card while the camera is still on Improper partition or facing partition errors Other scenarios Computer virus or malware causing file deletion Unexpected power off or abrupt system termination Reinstallation or upgrading the Windows / Mac operating system Bad sectors, Hard drive crash, File System errors, the partition table is invalid, and other such errors.

Devices You Can Recover From

External Hard Drives: Seagate, Dell, Kingston, Western Digital, IBM, Buffalo, LaCie, HP, Maxtor, Toshiba, iOmega, Sony, G-Tech, Hitachi, Transcend, Verbatim, and more. Memory Cards: SD, CF, SDHC, SDXC, miniSD, microSD, XD, SmartMedia, MMC, and others. Flash Drives: Pen Drives, USB Drives, Jump Drives, Gig Stick, Thumb Drive, Flash Stick, Memory Stick, PNY, etc. Digital Cameras and Camcorders: Canon, GoPro, Kodak, Casio, Nikon, Sony, JVC, Fujifilm, Samsung, LG, Panasonic, Olympus, Pentax, HP, Ricoh, and all DSLR. Computers and Devices: PC, iMac, Laptop, MacBook, Notepad, iPod, Smartphones, Drones, Server, and more. Operating Systems: Windows, Mac, Android

System Requirements

Remo Recover for Windows supports all Windows desktop operating systems from Windows XP to Windows 10 (32 bit or 64 bit), as well as Windows Server 2003 and 2008 (32 bit or 64 bit). Remo Recover for Mac supports all Mac operating systems since Mac OS X 10.5 and above, thus including Mavericks, Yosemite, El Capitan, Sierra, High Sierra. Please make sure that you do not download, install the software or save the recovered data on the same drive/partition from where you are recovering your lost data. This may result in permanent data loss. Also, an administrative account is required to install and use the software: please make sure that you are logged in as System Administrator or equivalent to root.

Hardware Requirements

Intel or AMD class processor with minimum 1.2 Ghz or higher RAM – 512 MB (1 GB recommended). Free disk space – Minimum of 50 MB (100 MB recommended) for software installation and enough free disk space to save recovered files. Minimum of 1024 x 786 screen resolution for better usability. A graphics adapter card with at least 64 MB of memory.

Remo Recover for Windows - Recovery Folder selection screen

Conclusion

That's it, at least for now: all in all, we can say that Remo Recover is a solid data recovery software, with an easy-to-use interface and a lot of useful features - especially if you are willing to spend for the Pro Edition, which is definitely what you should be aiming for since it's the only one that can perform a more advanced data recovery (raw data, partitions, and so on).   Read the full article

[bookmarking-services-blog]

The best rated server and networking computer store near by New York, California, Florida, Texas, United States

ALLHDD.COM is an online store based in New York, United States of servers and networking products offering competitive prices for all types of computer hardware specializing in server, storage solutions and related sub systems such as for Cisco, HP switches, Tape storage, Hard Drives, solid State Drives - SSD, Server and Networking gears including switches, routers, gbic, hub and modules. ALLHDD.COM is a company that supplies thousands of server and networking spare parts from nearly 500 different manufacturers and distributors including HP, Cisco, IBM, Dell, SUN, Qlogic, Emulex, Toshiba, Western Digital, Lsi Logic, Intel, Samsung, Seagate, Hitachi, AMD, Lenovo, 3Com and more. We are experienced in our business over half million customers around the world trust ALLHDD.COM to deliver undertaking vital hardware on time.  

More info @  Cheap Solid State Drive

[micent]

My next evacuees were Hughie and Angela

And Japanese business leaders that a tax overhaul and cut in regulations will help business on both sides of the Pacific. Chamber of Commerce in Japan. Military says an aircraft carrier participated in curtailed training with Australia before starting its journey north toward the Korean Peninsula.

wholesale nfl jerseys 55 on the ice. Right after Mike Moore. What Moore is, is a Sharks defenceman who was playing his fifth NHL game. A classic messenger flap conceals the secure drawstring closure, making this bag a daring complement to casual ensembles wholesale jerseys from china. The Tribeca is right at home with a tee shirt and jeans, although it would also look great paired with a sporty dress or skirt. With the genuine version of the Gucci Tribeca Medium Shoulder Bag easily approaching $1,500, it s likely to be priced well beyond the budget of a standard consumer.  wholesale nfl jerseys

wholesale jerseys from china For the Lions are not playing Australia this month. Ireland are not playing Australia in November. They are playing Qantas Wallabies. You're spread way too thin to even care about sex. However, the sexual aspect of your relationship is still very important and must be attended to. It's true cheap nfl jerseys, you can pretty much kiss your freedoms goodbye, but here are a couple things that I've started using to keep the spark alive..  wholesale jerseys from china

Cheap Jerseys free shipping My next evacuees were Hughie and Angela, the son and daughter of a dear friend from Jerseys Grand Hotel, who was now married and living in London. Angela was born the day after Jean. My friend and I have merry memories of late pregnancy when, kissing goodbye, our tummies met with a bump whilst our faces were still well apart! Hughie was two years older than Angela.  Cheap Jerseys free shipping

wholesale jerseys from china In some states cheap jerseys, if you get arrested and are hauled into court, you will undergo an assessment to determine how likely you are to show up for trial. You're given "pretrial services," which can consist of anything from probation like supervision to a text message reminding you when it's time to come in. In the extraordinary event that your assessment and your judge find it likely that you will run instead of coming to court, you may be held in jail pending trial, but that's rare.  wholesale jerseys from china

There is a huge array of customisation options, too.The Captur isn't the most exciting car to drive, but it's competent, refined, safe and secure. Renault reflects this with a range of engines familiar from the rest of its range: none is particularly fast, but all do a fuss free job and are pretty economical.Supermini based crossovers are a big hit with buyers, none more so than the Renault Captur. Thanks to a range of competitive finance options, as well as the car's smart looks and wide variety of personalisation options, the Captur has been a sales hit www.cheapjerseyschinatrade.com.The Captur sticks to the small crossover formula well, as it's bigger than the Renault Clio on which it's based, but isn't too big to be intimidating.

wholesale jerseys from china The Class 800 and 801 will be as iconic as the InterCity 125, Barr says. And a lot more modern. The InterCity 125 had a diesel locomotive at each end of the train, whereas all the kit needed to power the new Hitachi is under the floor there is no need for a locomotive, he says..  wholesale jerseys from china

nfl jerseys But rather than the ferocity of the Tiger Mom, we were raised with the more tender and protective nudge of a Mama Bear. And now, I have got to run. My daughter's friend is coming for a sleepover tonight.. Colin Kaepernick: The political and social climate and rhetoric in the US has been more divisive this past year than any other in recent memory. Utilizing social media and organizing nation wide protests, www.cheapjerseyschina8.com more Americans particularly minorities and the underserved are waking up to, exposing, rejecting, and fighting against the structural inequalities and widespread injustices that still plague our country. From actors to athletes, celebrities across the spectrum have leveraged their platform to speak out against these injustices, but perhaps no other has raised more discussion this past year than Colin Kaepernick..  nfl jerseys

cheap nfl jerseys That's what makes this bounty hunting debacle in New Orleans and the CFL, as disclosed by retired CFLer Adriano Belli seem so ridiculous to me. We are already out there hitting each other as hard as we can for maximum effect. Bounties are of absolutely no consequence in a game where injury is the only certainty.  cheap nfl jerseys

wholesale nfl jerseys It looked like if the stream flooded it would be washed away. Because everything around it was overgrown and it was hard to see from the road, www.cheapjerseysfromchinasale.com I had a real hard time finding it. But the problem was I didn't go look at it until after I had bought the lien.  wholesale nfl jerseys

cheap jerseys "We are obviously very disappointed that the Paul Williams vs. Kelly Pavlik fight has been canceled," Greenburg said in an e mail to The Associated Press. "Dan Goossen has told us he is looking for the best opponent for Paul Williams to fight on Dec.  cheap jerseys

wholesale jerseys No matter what kind of party we're attending, guys want to turn it into a riotous, rabblerousing shebang. Show me a man at a fancy wedding, and I'll show you a man with his shirttails hanging out and a sweat thong on the back of his rented tuxedo pants. It's just in our DNA wholesale jerseys.

[batjohnthomson-blog]

Magnetic Plastics Market  to Garner Brimming Revenues by 2022.

Summary:

Magnetic plastics are a type of plastic bonded magnets made from embedding the hard ferrite or rare earth magnets powder in a molded plastic. They come under non-metallic magnets and more likely to be bio-compatible due to which they can be used in biological systems. Magnetic plastics have their major applications in electronic media such as hard disk drives, speakers, packaging & labeling solutions, and healthcare devices such as pacemaker. The usage of magnetic plastics in electrical & electronics products is largely due to the cheap price and it is easily suitable for the size. The use of magnetic plastics reduces the cost of overall material and weight. Request A Sample @ https://mindaspiremarketresearch.com/request-sample/report/magnetic-plastics-market Globally, the demand for magnetic plastics is growing consistently, especially in Asia Pacific and North America markets. The growth is supported by increasing electronic media applications and healthcare industries in these regions, respectively. Currently, Asia Pacific is the global leader in the magnetic plastics market. China and India have built an advantage of covering most the manufacturing and consumption market, and thus providing the maximum contribution in the global magnetic plastics market. North America is the second major consumer of the global magnetic plastics market owing to the large healthcare industry. Europe and Middle East & African countries are expected to show high growth rate during the forecast period due to increasing acceptance and industrialization in respective regions.

Magnetic plastics based on ferrite magnetic powder have higher demand due to easy availability and low price. On the other hand, magnetic plastics based on neodymium–iron–boron (NdFeB) magnetic powder have a limited market share due to the high price of neodymium metal. Apart from these two, modern technologies are developing a new kind of magnetic plastics, which are completely made from an organic polymer with no metallic components. This will create an opportunity for novel applications ensuring improved stability and compatibility.

The study of the global magnetic plastics market provides the market size information and market trends along with the factors and parameters impacting it in both short and long term. The study ensures a 360° view, bringing out the complete key insights of the industry. These insights help the business decision makers to make better business plans and informed decisions for the future business. In addition, the study helps the venture capitalist in understanding the companies better and take informed decisions.

Get some Glimpse Of the report@ https://mindaspiremarketresearch.com/inquire/report/magnetic-plastics-market According to Infoholic Research, the global magnetic plastics market is expected to grow at a CAGR of 8.1% during the forecast period 2016–2022 to reach around $39.32 billion by 2022. The electrical & electronics segment is expected to maintain the global dominance in applications segment, driven by China and India. In geographic terms, Asia Pacific is expected to retain its top position in the global magnetic plastics followed by North America. Some of the key players in magnetic plastics are Hitachi Metals, Daido Steel, Arnold Magnetic Technologies Corporation, etc.

Report Scope: • Applications o Electrical & Electronics o Packaging & Labeling o Healthcare Devices o Others

• Materials o Ferrite Bonded Magnetic Plastics o NdFeB Bonded Magnetic Plastics

• Regions o Asia Pacific o North America o Europe o Rest of the World

• Industry outlook: market trends and drivers, restraints, and opportunities