#class 5 softswitch solution

[vindaloo-softtech]

Difference Between A Standalone SoftSwitch And A Distributed Softswitch Architecture

A SoftSwitch, as its name suggests, is a software-based solution that utilizes hardware that is common in the business. In Voice over IP (VoIP) networks, a SoftSwitch offers call control intelligence for initiating, maintaining, routing, and terminating sessions. Initially, service providers used SoftSwitches as a component of their next-generation IP network initiatives. Compared to outdated monolithic telephony equipment based on proprietary technology, SoftSwitch systems have inherent economic advantages.

Standalone SoftSwitch Architecture:

Centralized Control: In a standalone SoftSwitch architecture, all call control and switching functions are concentrated within a single, central SoftSwitch unit. This central unit manages call routing, signaling, and other related tasks for the entire network.

Simplicity: Standalone SoftSwitches are relatively straightforward to set up and configure. They are well-suited for smaller or less complex telecommunications networks where centralized control suffices.

Scalability Challenges: As the network grows or experiences increased traffic, standalone SoftSwitches may face scalability challenges. Adding more capacity typically means upgrading the central unit, which can become expensive or impractical.

Redundancy and Failover: Ensuring redundancy and failover capabilities in a standalone architecture can be complex. It often involves configuring backup systems and failover mechanisms to minimize service disruptions in case of a central SoftSwitch failure.

Maintenance: Maintenance and software upgrades may require downtime or careful planning to avoid network interruptions, as all critical functions are consolidated in one location.

Distributed SoftSwitch Architecture:

Decentralized Control: In a distributed SoftSwitch architecture, call control and switching functions are distributed across multiple interconnected SoftSwitch nodes or devices. These nodes collaborate to manage call routing, signaling, and other tasks.

Scalability: Distributed architectures are inherently more scalable. As network traffic grows or new services are added, additional SoftSwitch nodes can be introduced, making it easier to expand the network’s capacity.

Redundancy and Failover: Distributed architectures often offer better redundancy and failover capabilities. If one node fails, the workload can be shifted to other nodes, reducing service interruptions and enhancing network reliability.

Maintenance: Maintenance and software upgrades can be performed on individual nodes without affecting the entire network. This makes it easier to manage and maintain the network while minimizing downtime.

Cost-Effectiveness: While distributed architectures may have higher initial costs due to the need for multiple nodes and interconnectivity infrastructure, they can be more cost-effective as the network scales because they provide better reliability and flexibility.

In conclusion, the need for the communications network and the unique requirements determine whether a standalone SoftSwitch architecture or a distributed SoftSwitch architecture is better for any organization. While distributed systems have superior fault tolerance, scalability, and redundancy than standalone architectures, the latter are better suited for bigger, more complicated telecommunications infrastructures. Standalone architectures are simpler and better suited for smaller networks. The choice should be made in light of variables such as network size, growth projections, dependability needs, and financial limitations.

If it is a daunting task for you to select a SoftSwitch that can give you comprehensive solutions fitting into any VoIP network, opting for CloveKonnect will be the right choice for your organization. 

Whether yours is a small growing organization or already a big and established one, whether you need a standalone architecture or distributed architecture, Clovekonnect can be an answer to all your needs.

Centralized Dashboard

Invoicing and Integrated Billing (Prepaid/Postpaid)

Multiple carrier management

Multiple codec and protocol support*

Rates Plan Management

DID management

SMS and SMS API support

Additional minute Addon support

Payment Gateway (PayPal/ Stripe)

Reports (CDRs, MDRs, Audit log report, Payment report, Low Balance Notification, etc.)

Multiple User Permissions

Completely Cloud-based Web App Solution

In addition to these, a few business advantages you can leverage by using Clovekonnect are:

A complete remote solution enabling you to access VoIP SoftSwitch from anywhere

Select the SoftSwitch for standalone or distributed architecture 

Smart call management lets the calls be automatically routed through the least expensive route

Bringing down the cost of calls becomes easier 

A reliable communication process that is completely safe and secure

Enjoy ease in day-to-day operations and management by cost-effective calling architecture 

Top quality class 4 SoftSwitch that can fit in any VoIP network

Write us at info@vindaloosofttech.com if you want to take a free demo of CloveKonnect- a web app that can simplify your billing process.

[crmvoipsoftwaresolutions]

An Introductory Guide for Class 4 Softswitch Solution

Class 4 Softswitch solution has become acknowledged as the best tool that helps route call traffic en masse from one destination to another. A class 4 Softswitch enables the routing of VoIP calls to international destinations using IP networks. Connecting with a local class 5 Softswitch, a class 4 Softswitch sends calls through international channels and then connects with another class 5 Softswitch to complete the call.

A class 4 Softswitch solution is emerging as an important VoIP tool as it routes calls from a source to a destination, dealing with carriers, data, and call volume as well. In this blog, we dive deep to know the class 4 Softswitch in detail. We’ll also find answers to why it makes VoIP services more robust and reliable.

What is a Class 4 Softswitch?

Call switching as a practice has been around in the telecommunication industry for a long time. It has been used to interface callers with their recipients. Before the Softswitch landed on the horizon, this process was conducted manually, with administrators shifting phone lines physically from one circuit to the next. The Softswitch has made this practice automated.

Softswitch software helps to launch, manage, route, and terminate calls in VoIP networks. Both class 4 and class 5 Softswitch have emerged as the most widely implemented solutions for routing calls through different networks. For instance, if a user in the United Kingdom wants to call a number in the USA, a class 4 Softswitch will route the international call and maintain it as well till the call ends.

VoIP networks use different types of codecs and protocols. Also, the caller and the recipient may be using different types of telephony infrastructure. In such a scenario, the VoIP Softswitch does the transcoding of the different codecs that are used at both ends of the call. The same holds true for protocol conversion as well. If it is different at both ends of the calling line, the class 4 Softswitch does the protocol conversion to ensure a smooth flow of audio or video signals.

The class 4 Softswitch was originally designed to carry out the functions of call routing, protocol conversion, and transcoding seamlessly. But over time new and path-breaking features have been added to the solution. The new versions of the class 4 Softswitch come with security provisioning, failover, load balancing, backup, and reporting. It’s turned the technology on its head, making it a one-stop solution for all VoIP call connections.

What’s more, the new breed of class 4 Softswitch solutions also supports more call volume than its predecessors, giving VoIP solution providers an opportunity to scale their infrastructure and services. The solution also comes as a web based application making it easy to be accessed remotely and enables a cost-efficient way of scaling voice services and offering a foolproof presence between interexchange carriers.

Class 4 Softswitch solutions come with a laundry list of features that have turned VoIP services more profitable thanks to efficient routing and billing. What’s more, being a robust, scalable, and consistent solution, the Softswitch can easily manage and control VoIP calls, signaling, and every other aspect of large-scale VoIP calling.

Are you looking for class 4 Softswitch development services?

AC InfoSoft offers the best development services to build a wholesale Softswitch solution.

To learn more about class 4 Softswitch development services, please visit https://www.acinfosoft.com/class-4-softswitch/

[acinfosoft-blog]

Class 5 Softswitch Is an Essential Tool in International VoIP Calling Business

Gone are the days of physically switching telephone lines to route calls. Softswitch solutions or software switchboards have taken over this fundamental function in a seamless manner. VoIP is layered on different VoIP softswitch solutions that serve this essential function of routing calls from and to traditional PSTN networks, greatly facilitating productivity while lowering telecom calls, especially when one considers international calls. It is no surprise that VoIP service providers are proliferating and profiting. In order to serve customers regardless of their location and preference for local, national or international calls, a VoIP service provider needs to be fully equipped, especially with the right type of softswitch solutions for effortless call routing.

The class 5 softswitch is a VoIP service provider may offer services to individuals or to organizations and such clients may choose to make local or national calls. Such service providers cannot simply restrict themselves and their clients to local calls that is served by one type of softswitch. Though not necessary for a VoIP service provider to include class 5 softswitch in his setup he will find it is to his advantage. It is also known as hardware based digital local exchange and helps connect end users in traditional networks whereas in a VoIP environment it is software based on SIP protocol that routes the call to the correct IP address, SIP address or a specified DID number. It is the class 5 softswitch that is the vital link for the end user and, therefore, important for a profitable VoIP business.

A caller may make an international call in which case class 5 softswitch takes care of initiating the call at the VoIP service provider or his customer’s end. This is routed to a class 4 softswitch that routes it to the destination country and to the local exchange where it is directed to the dialed number as a normal call. It helps save on costs of international telephony. Class 4 works in the background. For end users and for VoIP providers, it is class 5 that is indispensable. This type of switch carries out a host of functions:

A     user with a standard PSTN device can connect to VoIP through the installed     class 5 softswitch at the VoIP service provider’s end;        

Connections     can also be established by using IP phones or adapters connected to the     softswitch;        

Mobile     users can just as easily connect using a mobile dialer that interfaces     with the softswitch;        

VoIP     service providers can provide services to non-IP device users with class 5     softswitch from ecosmob.com serving as the vital interfacing link to     enable use of PINless and calling card services;        

Call     forwarding, auto-attendant, call rules, call waiting, call conferencing,     voice mail and videoconferencing are some of the features possible when     the class 5 softswitch serves as the crucial link and, additionally,        

It     helps VoIP service providers maintain records of calls and bill customers     automatically.        

Looking for a reliable ad feature rich class 5 softswitch solution? AC InfoSoft, one of the leading VoIP development companies, offers class 5 softswitch solution development services. For more details, please visit https://www.acinfosoft.com/class-5-softswitch/

[alexcarson912]

Intelligent and State of Art Class 5 Softswitch Software for VoIP Service Providers

VoIP use is burgeoning, especially in the retail segment and VoIP service providers need to be ready to meet this demand. According to marketwatch.com the VoIP market is poised to grow to USD 190 billion by 2024. Retail segment will grow considerably, boosted consderably by the use of mobile devices in the VoIP communication chain. Managed IP PBX will account for the highest share. In both use case scenarios, the class 5 softswitch plays a key role.

Service complexity – broader possibilities

Legacy class 5 softswitch software may not be quite capable of addressing use case scenarios. Today’s operations are different from the previous generation where PSTN and voice connectivity were all that the setup had to deal with. Today’s VoIP configurations are inherently more complex and make use of, among other things, the IP Multimedia System and the class 5 softswitch must integrate with this and other topoligies to facilitate IP to IP calls, audio, video and conferencing using a variety of devices. Service providers may expect softswitches to include functions of IMS and also integrate well into various existing topologies in service provider networks. VoIP service, naturally, want the broadest possible integrations to take in IP, internet, PSTN, embedded services, value added multimedia and user services that they can offer to retail customers or to resellers.

Customization the key

Against this backdrop it is obvious that standard class 5 VoIP switch software is going to prove inadequate for the present and estimated future use case scenarios of a VoIP service provider or carrier serving retail end points. Customization is the key and roping in a developer to offer advanced tech class 5 softswitch with assisted implementation can create an infrastructure that permits smooth, ununinterrupted flow of bulk traffic with no hitches. Apart from the technical side where class 5 softswitch developers factor in the existing network topology of service providers and design the softswitch to fit right in, there are other considerations too.

Monetizing tool

VoIP service providers are sitting in a zone from where they can reach out directly to retail and individual users and also appoint a string of resellers. In addition, with class 5 softswitch in their kitty, they can offer value added services to bulk users such as WebRTC, unified messaging, personal communication and so on. Here too, customization by class 5 softswitch developer can result in:

White labelling: Service providers get white labelling softswitch they can brand in their own name and create a favorable brand image.

Language customization: A Europe or Asia based service provider will naturally want local language for billing, statements and other purposes.

Billing: A billing module that has the facility to let service provider set rates for different customers, for resellers and for end users and thus offer satisfaction in addition to generting optimal revenues.

Easy monitoring and controls: This part is indispensable and needs to be customized to suit the business model and how the class 5 softswitch is used.

Class 5 may be the younger brother of class 4 softswitch in terms of capability but it can be a money spinner for service providers if implemented right and exploited to the maximum.

[nelsongibs22]

VoIP Softswitch solution can empower VoIP calling businesses. The class 4 and class 5 Softswitch solution have different pros to offer. Learn the top 3 benefits of the VoIP Softswitch solution.

[reve-system]

A softswitch comes with huge amount of features and modules such as call shop, calling cards etc.

[isabellaswan0]

Get Class 5 Softswitch Development To Empower Your Business As Telecom Service Provider

VoIP is gaining popularity for its abundant benefits. More and more people are subscribing for this amazing communication solution. If you are a Telecom Service Provider who is using traditional telecommunication solution to offer communication services, then this is the time to switch to the Class 5 softswitch solution. This is the best solution which comes up with a plethora of benefits which will take your business to the next level.

Advanced Telecommunication Features

The class 5 softswitch solution offers all basic telecommunication features. Moreover, it comes up with a wide range of advanced features that will help you to increase customer satisfaction as well as increase business by offering your services to both, residential and commercial customers. Below is the list of features offered by class 5 softswitch solution:

Carrier-grade platform

Auto provisioning tool

CDR reports

Blacklist/whitelist

Call on hold

Number portability

Feature-rich voice mail

Voice-mail

Call Authorization

Emergency number dialing

Callback

Customizable Music on Hold

Caller ID

Conferencing

Call forwarding and waiting

Package billing

Reduced expenses

The class 5 softswitch requires a minimum to no hardware to support the telecommunication business. This will save a huge amount of capital investment. Also, it will reduce the maintenance cost. Moreover, the system is a software based solution that requires less manpower in operations which further reduces expenses.

Increased revenues

As the expenses go down it is obvious the revenue graph goes up. Moreover, the class 5 softswitch solution can use SIP routes to offer calling services. VoIP calling is cheaper than the traditional calling. This will increase your revenues and business, too, by attracting more customers. All these factors will work in favor of increasing revenues.

Ecosmob Technologies Pvt. Ltd. has a team of adroit developers who offer class 5 softswitch solution development for Telecom service providers. To know more about its offered service, visit https://www.ecosmob.com/class5softswitchdevelopment/

[vindaloo-softtech]

FreeSWITCH 101: Why is it a Preferred VoIP Solution Development Platform?

The rise of VoIP technology has led to its adoption as a reliable communication solution by businesses of all sizes. FreeSWITCH, an open-source VoIP technology, is popular among developers due to its versatile features and scalability potential. It is a suitable platform for developing any VoIP solution, making it an attractive choice for businesses looking to implement a communication system.

Introduction to FreeSWITCH

FreeSWITCH is an open-source, modular VoIP technology that enables developers to create scalable communication solutions with multimedia capabilities. It can handle data from IP and PSTN networks on a single line without losing quality. In addition, the availability of open-source libraries makes it easy for developers to achieve most functionalities without extensive coding. FreeSWITCH is licensed under the Mozilla Public License and is available for free. FreeSWITCH has various valuable functions, including Apache portable runtime, SQlite database engine, Sofia SIP user agent library, libspeex for voice codec encoding/decoding, mod_spandsp for fax gateway, and libSRTP for secure real-time transport protocol.

FreeSWITCH development services can create custom VoIP solutions for businesses tailored to meet the specific needs of companies of all sizes. Businesses can use FreeSWITCH to make the following VoIP products:

1. PBX office phone system

2. Class 5 Softswitch for telephone carrier

3. Application servers like voicemail, conferencing, and IVR

Advantages of FreeSWITCH

High Compatibility and platform independence

FreeSWITCH is a cross-telephony platform that supports multiple operating systems and programming languages, making it suitable for any VoIP FreeSWITCH development project without restrictions.

Can handle a variety of media

FreeSWITCH supports various media types, carriers, protocols, and codecs, making it a versatile platform for developing customizable VoIP solutions.

Can handle large volumes without losing quality

FreeSWITCH can handle thousands to millions of concurrent calls without any quality loss making it a powerful VoIP telephony platform that can also support high volumes of video calls.

Support advanced Multi-tenancy

FreeSWITCH has customizable inbuilt libraries for multi-tenant solutions, allowing scalable and reliable VoIP solutions to connect business branches or generate new revenue streams.

Possess modular architecture

FreeSWITCH's highly modular architecture and open-source nature allow easy customization and scalability, making it a popular platform for building VoIP solutions without vendor dependence.

Innovative Features

FreeSWITCH has unique and advanced features, such as wideband conferencing thread isolation, not commonly found in other VoIP platforms.

Benefits of using FreeSWITCH Development for Business

1. Communication Solution

2. Cost-effective

3. Impressive Solution

4. Stability

5. Adaptability

Conclusion

FreeSWITCH is a highly reliable and comprehensive platform for developing simple to complex VoIP solutions, distinguished from other open-source VoIP technologies such as Asterisk, FreePBX, and Jitsi. We at Vindaloo Softtech can offer assistance in developing a FreeSWITCH solution; contact us.

[voiptechsolutions]

VoIPTech Class 5 Softswitch technology

VoIPTech solutions serve you the best class 5 Softswitch system to get greater traffic volume over international protocol.

[teletalkapps]

Features of Class 5 Softswitch

Using a Class 5 Softswitch, which is a SIP Softswitch, you may connect to several IP networks and transport VoIP conversations from one network to the other. This programme allowed VoIP service providers to provide continuous service at a modest initial outlay, which lowered operational costs even more. It also provide Softswitch and VoIP Billing System integration.

An sophisticated retail and wholesale billing solution is provided by the Class 5 Soft Switch and VoIP Billing. All of the call-routing features that VoIP service providers need, from small businesses to major corporations, may be found in this software.

Features of the Clientele

XMPP and instant messaging for voice and video calls

Conferencing via phone or IM

Virtual Fax Machines (VFA) and Interactive Fax Machines (IVM) Clients

Parallel and Serial Calling

Call forwarding based on a certain time interval (CFU, CFB, CFNA, CFT, CFS)

In the quest for Malicious Call ID (MCID)

Anonymous Call Rejection and Call Blocking for both inbound and outgoing calls

Self-Service Interfaces for Customers

In the webRTC Client Self Care interface, the customer may easily and intuitively customise his services.

Web-based Dashboard for System Administrators

System administrators and customer service representatives may use a regular web browser to access the platform's configuration and troubleshooting apps through the Administrator Web Interface.

Web-based Reseller Interface

Customers may benefit from the C5's "white level" service offerings because of the C5's hierarchical, object-oriented interface. The platform owner may have access to the different interfaces for operational support by granting resellers administrative privileges inside their reseller realm.

Engine for Billing and Rating The creation of Call Detail Records (CDRs) may be made more dependable and consistent by using the SIP routing engine as a data source. The real-time rating engine can give

[crmvoipsoftwaresolutions]

A Quick Guide on Call Center Dialer Widget

The businesses need to use advanced solutions to increase their competitive benefits. The call center software is one of the solutions used by companies these days to increase competitive advantages. To make the best use of this solution, it is necessary to understand different technical terms related to this solution. Today, we are going to learn about the call center dialer widget.

What is the call center dialer widget?

It is a widget that can be used within any third party or open source solution to make use of the call center dialer within a system other than the call center solution. Now let’s understand this with more details.

The call center software provides communication features for any inbound and outbound call. Below is the list of features available during the live call:

Mute 

Unmute

Call hold and retrieve

Call transfer

These are the common functions available in the call center dialer when the call is connected. Once the call is finished, the dialer asks for the disposition. 

The call center widget is the widget that comes with all above mentioned features and it gets available in any other third party solution. It is usually used as a single sign on the system to allow agents and executives to use the call center solution dialer within any other system. Let’s see an example.

In many call centers, BPOs, KPOs, and companies the call center software is used along with the CRM (Customer Relationship Management) system. The call center dialer widget can be added to the CRM system. Once the widget is added the agents can see the call center dialer within the CRM system. The agent doesn’t need to switch to the call center software window and still, he can use the dialer feature. Once the call is ended, the agent can add the disposition in the dialer within the CRM system. This disposition will get added to the call center solution. Furthermore, the call logs will also be reflected in the call center solution so the reports can be generated and reviewed. 

Similarly, the call center dialer widget can be added to any solution. It can be an IP PBX system, class 5 Softswitch or any other solution

Now, the question is how can this be possible?

The integration of the call center dialer can be added to any system using the integration services. For example, call center CRM integration can add the call center dialer within the CRM system.

There are many benefits of this kind of single sign on system along with the simplified process of using multiple systems.

If you want to integrate the call center dialer in any of the systems, contact AC InfoSoft. This call center software provider company offers call center solutions, call center CRM integration services, call center dialer widget, VICIDial customization, call center software development, call center dialer solution, and more. To know more about AC InfoSoft and its offerings, please visit https://www.acinfosoft.com/ 

[seoteletalkapps]

Best Class 5 Softswitch in VoIP Business year 2022

Class 5 Softswitch with Billing and Routing with extended functionality, increased stability and professional support directly from the developers.

A Softswitch is a software-based device in a VoIP network for managing voice traffic and routing calls within the network.  A Class 5 softswitch is a type of hardware that VoIP providers, cell phone carriers, and PSTN carriers use to connect to each other. In contrast, a Class 5 Softswitch is a telephone switch or telephone exchange in the public switched telephone network, located at the local This platform enables service providers to build scalable and robust VoIP services which can range from small single server deployments to cluster solutions.Sipwise Class 5 Softswitch is a turn-key, carrier grade VoIP Softswitch, and as such, it is the core system of our unified communication solutions.

A class 5 Softswitch is a product based gadget that permits all the VoIP providers, PSTN transporters and wireless transporters to cooperate with one another without any problem. There are 5 unique kinds of switches that are accessible and the class 5 is one of them. Remember that the quantity of the Softswitch steers clear of the nature of the item however the region. Class 5 softswitch permits you to associate the end clients, though class two to four assists you with interfacing the urban communities, towns and states. Class one is for worldwide systems administration purposes. For any VoIP provider it ought to be evident that the class 5 softswitch can monitor the quantity of minutes and will charge the clients naturally as per their use. You ought to recollect that any telephone can really associate with the class 5 softswitch.

New Releases

SMS Features with SMS Billing

PIN to PIN Balance Transfer

Mobile Topup

Callshop System

Account and user management

Multiple Calls on one account

Customer management

Prepaid/Postpaid recharge

Agent account

Batch management

Signup(customer)

Account detail(Agent,Customer)

Recharge/Payment Online

SIP Device Add/Delete

Limit the maximum number of Calls per customer

Block Prefix

CDRS

Invoice

Charges

IP Termination (Wholesale)

Real-time billing

Multiple level reseller

Multiple provider creation & login

Rate Management

Billing Increment

Termination Rates

Origination Rates

Rate Group

Connect Charge

Expiry of rates

Import Rate sheet

LCR & Gateway Management

Multiple Provider supported

Multiple Gateway supported

Add multiple SIP Providers

Provide redundancy based on cost

Strong LCR engine

Call Limitation per trunk

Many trunks per provider

Costs for provider routes based on area code

Limitation channels by each provider

Billing Reports & Invoice management

CDR (Admin, Sub-Admin, Reseller, Sub-reseller, Customer,provider )

Live Calls Report

Summary Report

Trunk Stats

Search Criteria for reporting

Export report to PDF & Excel

Invoice generation

Payment Report

Commission Report

ASR & ASD

IVR Management

IVR prompts( balance,destination, credit time)

Customize IVR in multilanguage

DID Management

DID Management from Portal

Web Interface

Multi Language Support

Real Time Customized Billing Interface (Color & Theme of Form, Table, Menu & Buttons)

Calling Features

VoIP Wholesale

Calling Card

PC-Phone

Device-Phone

Phone-Phone

Mobile VoIP

Redundant Architecture

Server Failover

Database Replication

Additional Features

Multi currency support for Balance

Signup

Email Notification

User Validation support for admin

Export data into PDF

[alexcarson912]

Class 5 Softswitch Solution Development For Current and Future Requirements

Technologies evolve. Markets change. VoIP service providers and carriers need to realign to take advantage of emerging opportunities and to stay current. In this scenario, sticking with existing legacy class 5 softswitches can prove to be a bottleneck to further expansion or to meet current demand. It pays for such services to look to the present and future in class 5 softswitch technology, development and deployment.

Market realities

Carriers and VoIP service providers may be satisfied with serving wholesale market with class 4 softswitches and including class 5 softswitch as an afterthought for retail. Today, the retail segment presents great opportunities for cloud voice platforms and technologies that have capabilities to handle not just voice but also video and media. This calls for the latest in class 5 softswitch development. This carries forward the standard features while including better capabilities to scale, virtualize and put in place a flexible IP multimedia subsystem environment to service the retail segment. Mobility is one reason to have a class 5 softswitch in the IP network. Businesses that relied on PSTN are now switching over entirely to VoIP communications. Even home users realize the advantages of VoIP, especially for long distance and international calls. Competition between carriers is fierce. Older softswitches are expensive to maintain and have limited functionality.

Custom development the key

Each carrier and service provider’s infrastructure is different and so are customers and usage patterns across various segments. In this scenario it is custom class 5 softswitch development that will satisfy technological needs. In addition, customization extends to billing and account management, further facilitating the financial side of operations. The crucial factor is how well the class 5 softswitch development is aligned with existing infrastructure and business models to fit right in and be future-proof while including scope for further expansion. The cloud based softswitch is a natural choice since it leaves the onus of upgrades and maintenance on the vendor.

Smart technologies

The standard route even in custom development of class 5 softswitches is to implement technologies but the better class of vendors will provide smart and intelligent solutions. Features like call authorization, conferencing, call routing, call forwarding and auto-provisioning gain a lot when some degree of artificial intelligence is incorporated into the softswitch solution for carriers. Carriers using hardware based or legacy class 5 softswitches will find that a modernized and custom deployment transforms their operations, reduces costs, delivers satisfaction to users and opens up more avenues for growth. It is not easy to find a VoIP developer with capabilities in AI implementations but there are a select few who do deliver next generation technologies that are a cut above the rest. And when you get this in a scalable, hosted, pay-as-you-go package, it becomes even better.

[reve-system]

Both Class 5 and Class 4 Softswitch are complete VoIP solutions that roll out rich in featuring next generation services! But, you also need to understand some major differences and features of both Softswitch more clearly. So, let’s figure out how a Class 5 Softswitch differs from Class 4 Softswitch: