#esd flooring in Hyderabad

[anaghasystems-blog]

Leading ESD Aprons Manufacturers and Suppliers in Hyderabad.

ANAGHA Systems is one of the leading manufacturers and supplier of ESD Aprons and Anti-Static Aprons in India. Our high quality, tailor fit designed aprons are available in various sizes as per user requirement.

ESD / Anti-Static Aprons are made of fabric consisting of 98% Polyester & 2% Conductive Carbon Nylon Fibers in the form of square conductive grid spaced every 5mm to dissipate static charge at higher rate. The conductive nylon fibers are woven in a chain-link design throughout the material, providing continuous and consistent charge dissipation.Our aprons are compatible for Cleanroom and Static Controlledenvironments also. Pockets &ESD Logo are included.

ESD / Anti-Static Aprons are suitable for ESD Protected & Static Controlled Areas, Electronics Manufacturing Shop floors, Service Centers, Research & Development Labs, Mobile Repairing Centers, Semi-Conductor Labs, Cleanroom environments & Pharmaceutical Labs too.

ESD /Anti-Static Aprons are an ESD protective product that should possess the following ESD control characteristics:

Antistatic low-charging so they minimize the generation of electrostatic charges

Dissipative so when grounded they will remove charges to ground;

Shielding creating a “Faraday Cage” effect so they will restrict charges generated on the user’s clothing to the inside of the ESD / Anti-Static Aprons

Groundable so the user can easily and reliably connect them to ground.

 Installation and grounding of ESD / Anti-Static Aprons:

Follow the directions below for proper installation and grounding of the ESD / Anti-Static Aprons:

Put on the ESD / Anti-Static Apron and fasten all of the snaps on the front of the lab coat, making sure that clothing is not exposed outside of the apron.

Throughout use, it is essential that the conductive cuff is in intimate contact with the wrist skin. The conductive cuff should never be allowed to be pulled up and over the shirt sleeve.

Ground the ESD / Anti-Static Apron. A popular way to ground an ESD / Anti-Static Apron is with a coiled cord either attached to a snap on the waist area of the apron via a wrist strap snapped to the inside cuff of an ESD / Anti-Static Apron. If none of these methods are suitable, the lab coat should be grounded via the person’s wrist removing charges via ESD footwear to ESD protected flooring.

ESD /Anti-Static Aprons are a conductor and therefore should be grounded. If not grounded, the ESD garment can be a potentially threatening isolated charged conductor. If an operator is wearing an ESD / Anti-Static Apron but is not electrically connecting the apron to either their body’s skin or ground, then charges on the aprons may have nowhere to go or discharge to.

Testing of ESD / Anti-Static Aprons Panel-to-panel conductivity is essential to ensure portions of the aprons are not left as isolated charged conductors. A Resistance Test Kit can quickly measure resistance of the fabric and ensure panel-to-panel conductivity by placing five pound electrodes on different fabric panels.

Find here ESD Product Manufacturers in Hyderabad.

 Specifications:

Sizes: S, M, L, XL & XXL

Colors: White, Light Blue, Navi Blue, Pink, Yellow & Green

Type: 5 MM Grid

Material: 98% Polyester & 2% Conductive Carbon Fiber

Superior air permeability & particle filteration

Surface Resistance: 10⁶ - 10¹º Ω

Decay Time: ±0.5 Sec

Weave: ½ Twill

[anaghasystems1]

ANTI STATIC PRODUCTS in HYDERABAD, INDIA

Anti-Static Products are the safety products to safe guard Static Sensitive Products in Electronics Manufacturing Shop Floors. Anti-Static Products will play a vital role in protecting workers from electrostatic discharge too. At times, electrostatic discharge can cause for a fire break outs which will impact heavily on productivity. Successful ESD protection is attained only through the appropriate implementation of ESD Programs and good quality Anti-Static Products.

 Anti-Static Products like Anti-Static Mat, Anti-Static Tiles, Anti-Static Work Tables, Anti-Static Chairs, Anti-Static Aprons, Anti-Static Wrist Straps, Anti-Static Slippers, Anti-Static Shoes, Anti-Static Gloves, Anti-Static Packing, Static Shielding Bags, Anti-Static Bins are the key products in Static Safe Work Environments.

 If you are looking for good quality and effective Anti-Static Products, please visit our website www.anaghasystems.com today and enquire for your requirements. We, Anagha Systems (The Cleanroom & ESD Co.) are the top manufacturers and exporters of wide range of Anti Static Products in Hyderabad, INDIA. With our in-house bulk manufacturing facility, we are manufacturing & supplying Anti-Static Products to our esteemed customers in INDIA and across the globe.

[postolo]

SLS Noida organised Social Responsibility Cell: SymVaani – Romancing the Radio

On the World Radio Day, Institute Social Responsibility Cell, Symbiosis Law School, NOIDA has organised an Interactive Session: SymVaani – Romancing the Radio on February 13, 2019.

About SymVaani:

SymVaani-Romancing the Radio is a peek into the soul of India. It is about passion, creativity, nostalgia and a million other things that go into the making of country’s collective conscience. More than anything else, though, it is the story of India. Through this initiative we aim to re-live the dream that is India and to hear it speak in a billion voices.

This World Radio Day, we bring together some of the stalwarts of the field to celebrate the medium as the voice of the people of this country, in line with UNESCO’s stated objectives behind the observance of this day.

Resource Persons

Mr. Athar Saeed, Anchor – Zee TV, RJ – FM Rainbow & News Reader/Anchor/Editor -Aakashwani

Mr. Athar Saeed Graduated in Law from Rohilkhand University, Bareilly, Shiksha Visharad from Sahitya Sammelan, Allahabad, Ayurved Ratan from Sahitya Sammelan, Allahabad and Adeeb from Jamia Urdu University, Aligarh

Mr. Athar is actively involved in the art of performing voice-overs by providing voices to more than 100 Hollywood/Animation Films as Dubbing Artist, ANI (Asian News International), Discovery channel, History, Sasnkar, Satsang, DD Urdu and DD National, advertisements/documentaries, audio/visual cassettes and commercial spots for radio and television.

In the broadcasting world Mr. Athar is also known for his commentaries on national level for All India Radio on very special occasions like Republic Day and Independence Day, covering the popular sports commentaries like IPL, World Cup 2009 and other important sports events related to cricket.

One can also witness Mr. Athar’s presence in academics and the corporate world as an Anchor/Commentator/Drama Artist of NCERT’s Academic programs for Radio and Television and a film for PETRONET LNG Gas Ltd. Mr. Athar is also a senior journalist and is associated with Indraprastha University, Delhi, Jamia Millia Islamia, TMU and Amity University to take media classes. He also acted as a model in an ad film for SELVO Company.

As an anchor, Mr. Athar’s stint with ZEE TV Network resulted in different shows based on career, social and religious issues, hosted a celebrity show Baatein Mulaqatein, for DD Urdu, career based program, Naee Raahein Naee Manzilein, informative and communicative programme Insaaf ka Darwaaza for Doordarshan and Tandurusti Hazar Nemat, a health magazine for ETV Urdu.

Apart from Anchoring and hosting popular shows Mr. Athar also worked as a Script Writer for program Ek Haseen Pal that went on air on Bhopal Doordarshan. Mr. Athar is also a drama artist for Doordarshan, Commentary Speaker for Films Division, Assistant News Editor with DD News and an Anchor / Commentator/Narrator of Gyan Darshan TV channel of IGNOU/Doordarshan.

Mr. Athar is associated with All India Radio presenting programs on a wide range of topics since 1987. His voice is well recorded on Delhi Stations/National Channel/ESD/FM Channel of All India Radio, World Space Satellite Radio, FM Rainbow India, FM Gold channel, Vodafone radio, Urdu News on Radio, HUM FM in UAE, Gyan Vani Delhi, FM channel of IGNOU and as a Drama Artist for All India Radio.

Mr. Athar also serves in various government programmes like Virasat Mela, Punjabi Music Show at Delhi Haat by Punjabi Academy, Qawwali and Sufiyana concerts at Garden of Five Senses by Delhi Tourism, Jashn-e-Salaam by Zee Network in Hyderabad and Delhi, Azam Garh Festival at IIC in New Delhi, Shimla International Summer Festival and Conducted Quiz competitions at Urdu Academy, Delhi.

Mr. Athar was awarded with Shikhar Samman 2012 given by cricketer Virendra Sehwag for excellent achievements in media, Best Anchor Award by Zee Network (ZEE SALAM) in 2014, Awarded with National Youth Award.

Mr. Ashish Ddavidd, RJ, All India Radio, CEO, CBA’s Den, Independent & Self Employed

Mr. Ashish Ddavidd finished schooling from St. Columba’s School New Delhi, followed by graduation from Delhi College of Arts and Commerce and Post Grad in Film and TV Production.

Mr. Ashish worked as a Creative Head in a number of Production Houses in Delhi. Mr. Ashish also sung in numerous Rock Bands and Acapella Choirs. He has been doing Voice Overs for a good 14 years now. He has also been National Station Voice & Breakfast Jock for Delhi’s Radio City 91.1FM, besides 94.3 Radio one’s Drive Time Jock with 92.7 Big FM as their ‘Voice Of The Station’ for a 4th successfully running year. Also freelancing as a Voice over Artiste & looking forward to doing more creative, extensive and specialized Voice over Work.

Mr. Ashish is a multifaceted media personality! He has been working with Radio Stations at the position of National Station Voice and Radio Presenter since last 12 years. He has been professionally associated with brands like Radio City 91.1FM, 94.3 Radio One, 92.7 Big FM and 102.6FM Rainbow India.

Mr. Ashish has also been singing professionally and has been a part of many bands in the city such as Dr. Palash Sen’s Euphoria Band, Them Clones, Out Of The Blue and his current blues band Jive Can! Mr. Ashish also owns and runs his own Music Studio by the name of CBA’s Den where he records, mixes and masters Original Music of Bands and Singer Songwriters.

Dr. Sangeeta Rai, Assistant Professor, Miranda House, University of Delhi & RJ for FM Gold 100.1 MHz

Dr. Sangeeta Rai is working as part time RJ for FM Gold 100.1 MHz and a newsreader at D.D.NEWS.

Dr. Sangeeta did her graduation and masters in Hindi from Poorvanchal University, Jaunpur, UP, followed by M.Phil., Ph.D. in Hindi from University of Delhi. She also completed her BJMC and MJMC from Vardhman Mahaveer Open University, Kota and a Certificate and diploma course in Urdu from University of Delhi.

Before joining Miranda House College, New Delhi, Dr. Sangeeta has taught at various colleges and Universities of Delhi like Guru Gobind Singh Indraprastha University, Shyama Prasad Mukherji College, Daulat Ram College, Janki Devi Memorial College and Delhi College of Arts and Commerce.

Dr. Sangeeta served as editor of Bal-Patrika Killol, Assistant Research Scholar from National School of Drama, Delhi and contributed in their magazine Rang-Prasang.

Dr. Sangeeta also has various publications to her credit. To name a few- Chaiti Se Phagua Tak in Saamyeek Mimansa Patrika, Bhasha Ke Sath Poora Charitra, Poora Jeevan published in Aajkal Patrika,  Kashi Me Kabi  published in Sanchar E-Patrika, Cine Sur Aur Shayar Ke Geet published in Picture Plus Patrika, Presented paper at 8th Antarrashtriya Sahitya Avam Sanskriti Sammelan, Itli and the topic was Hindi Ke Vaishvikaran Ka Vartmaan.

Dr. Sangeeta recalls one of her best memories was an Interview with actor Ashutosh Rana, which was published in Outlook.

The event was conducted on Wednesday, February 13, 2019 from 10:30am – 12:30pm at  Auditorium, Ground Floor, Symbiosis Law School, NOIDA.

Tweet

The post SLS Noida organised Social Responsibility Cell: SymVaani – Romancing the Radio appeared first on SCC Blog.

SLS Noida organised Social Responsibility Cell: SymVaani – Romancing the Radio published first on https://sanantoniolegal.tumblr.com/

[kineticpolymers12-blog]

Setting Up ESD Workstation

ESD Workstation is an working area used to prevent electro static discharge while working with materials and equipment. It provides ESD protection by offering proper grounding paths. It is used while manufacturing and working with electronic devices in all stages like testing, repairing etc

Basic set up of ESD Work station contains

Table mat – Work space to dissipate ESD from conductive products available in various materials, sizes and colours

Common point ground cord – Contains cable and connector to connect table mats and wrist straps

Wrist strap – contains wrist band and coil cord

Floor mat - Work space to dissipate ESD from conductive products

Floormat ground cord – contains cable and connector to connect floor mat and ground

Heel Grounder – used to connect person to ground

ESD Identification – ESD warning signs and posters

Guildelines to set up ESD work station

Place your ESD Table mat on the work table

Connect  ESD Common Point Ground Cord to the ground snap attached to your table mat. Attach the ring terminal of your ground cord to a nearby grounding receptacle.

Wear ESD wrist band and plug plug the coil cord banana plug into the receptacle of the common point ground.

Place your ESD Floor Mat in front of your worktable

Connect  Low Profile ESD Ground Cord snap to the ground snap on your floor mat.  Attach the ring terminal to a nearby grounding receptacle . Wear ESD Heel Straps when remaining on the ESD floor mat.

Kinetic Polymers is a Hyderabad based ESD products manufacturers and suppliers offering complete range of ESD products.

[contentone3]

ESD Table Manufacturer Hyderabad-ESD Flooring-ESD Accessories

Contact us if you are looking for the installation of ESD flooring and ESD accessories in Hyderabad. As we are one of the leading ESD table manufacturer in Hyderabad.

[anaghasystems-blog]

ESD Workstations and Chairs suppliers in Hyderabad

ESD Protected Area (EPA)

What is ESD Protected Area or EPA

ESD Protected Area is defined area that has been established to control Electrostatic Discharge (ESD) and to avoid all problems resulting from ESD damage. EPA is a defined space in which all surfaces, objects, people and static sensitive devices are kept at same electrical potential, which is achieved by having only groundable materials (materials with electrical resistance between 10¹ to 10⁹ Ohms). All surfaces, tools, people should be grounded through a resistance of between 1 and 10 megohms. Anything which does not dissipate charge should be excluded from ESD Protected Areas.

We at ANAGHA Systems, with our significant experience we offer one stop solution for establishing ESD Protected Areas in Hyderabad, Bangalore, Goa and Coimbatore regions. Our workmanship and product quality are being certified every day by and increasing number of satisfied customers.  

What is ESD Workstation

An ESD Workstation is a work area where materials & tools are utilized in the environment where the electrostatic voltages and ESD is limited and kept under control.

To create ESD Protected Area & ESD Workstation, need below features:

a.       Working Surface Mat

b.       Working Surface Mat Grounding Cord

c.       Earth Bonding Point Plug

d.       Wrist Strap

e.       Earth Bonding Point Bar

f.        ESD Foot Wear

g.       ESD Flooring

What is ESD Chair & ESD Stool

ESD Chairs and ESD Stools are useful to reduce static charge generated by sitting and to discharge it safely through the conductive casters and floor grounds. ESD Chairs are made of customs fabric, components, tools, bases & casters.

We at ANAGHA Systems, we design and develop a custom made ESD Workstation, ESD Chairs and ESD Stools as per customer requirements. With our highly skilled design & manufacturing team, we are fulfilling customer requirements. We supply ESD Workstations, ESD Chairs and ESD Stools in Hyderabad, Bangalore, Coimbatore & Goa.

[anaghasystems-blog]

Static Control Products and ESD Products in Hyderabad

Electro Static Discharge(ESD) or Static Control Products are quite often used to control electrostatic discharge(ESD) in electronics manufacturing and various industrial applications. Static Control Products (ESD) are classified into various types: Personal ESD Control Products, Cleanroom ESD Control Products, ESD Storage Products, ESD Packing Products, ESD Testers.

We at ANAGHA Systems offers complete range of Electro Static Discharge (ESD) or Static Control Products in Hyderabad. That will protect your sensitive electronic assemblies from harmful static charges. Our product quality will help you stay ahead of your competition.

Personal ESD Control Products:

Personal ESD Control Products/Static Control Products such ESD Aprons/Lab Coats, ESD Caps, ESD Wrist Straps/Wrist Bands, ESD Slippers, ESD Shoes(Butterfly Shoes/Velcro Mesh Side Shoes), Heel & Toe Grounders, ESD Finger Cots, ESD Gloves.

ESD Aprons:

               As per guidelines, wearing ESD Aprons/Lab Coats is recommended to shield the insulative clothing which would be made of synthetic fibers (which cannot be grounded) and minimize the electric fields being generated ESD Protected Areas (EPA).

               Our ESD Aprons/lab coats are constructed using a dissipative material which incorporates textured polyester and carbon nylon fibers. The conductive nylon fibers are woven in a grid-link design throughout the fabric, providing consistent and continuous dissipation of charges.

ESD Caps:

               Wearing ESD Capsin ESD Protected Areas (EPA) is recommended to protect against contamination and to minimize the electric fields being generated ESD Protected Areas (EPA).

               Our ESD Caps are made of using a dissipative material which incorporates textured polyester and carbon nylon fibers. The conductive nylon fibers are woven in a grid-link design throughout the fabric, providing consistent and continuous dissipation of charges.

ESD Wrist Straps/Wrist Bands:

               In an ESD Protected Area (EPA) all surfaces, objects, people and ESD Sensitive Devices(ESD’s) are maintained at the same potential. Wrist Straps are the most common personnel grounding device and are used to link human beings to ground. Wrist Straps are made up of two components and in two parts, a band which is worn comfortably around wrist and coil cord which connects the band to an Earth Bonding Point (EBP).

As per the guidelines and standards, 1 megohm resistor should be incorporated with ESD Wrist Straps/Wrist Bands. A 1 megohm resistor allows any static charge to discharge completely over time, typically less than 01 second. Without the 1 megohm resistor, the static discharge would be an instantaneous drain directly to ground, which may lead to failure of components on electronics-assemblies.There are two types of wrist straps will be available: elastic & metal wrist straps, both are adjustable.

               We at ANAGHA Systems supply both elastic & metal wrist straps/wrist bands. Our elastic wrist straps are made of conductive fiber threads with stainless steel plate provides maximum human skin contact. Metal wrist straps are made of stainless-steel band to provide excellent electrical contact.

ESD Slippers/ESD Shoes/Heel & Toe Grounders:

               ESD Footwear (ESD Slippers/ESD Shoes/Heel & Toe Grounders) are frequently used where the technician needs more freedom of movement than the wrist strap and cord allow. ESD Footwear is helpful to reliably contact grounded ESD Flooring and provides a continuous path-to-ground by removing electrostatic charges from personnel. Combined with ESD Flooring, you can prevent damaging buildup of static discharge with ESD Footwear.

               We at ANAGHA Systems offer wide range of ESD Footwears includes ESD Slippers, ESD Shoes (Butterfly & Velcro Mesh Side), Heel & Toe Grounders made of high-quality base material from reliable manufacturers. To fulfill customer requirements at short notices, we stock various sizes locally.

ESD Finger Cots:

               ESD or Antistatic Finger Cots are made of latex material and are in various colors. Finger cots are ideal for handling small parts where a full glove is not required. Finger cotsare worn over fingers when handling sensitive electronics or any item this is static sensitive. These are commonly used in electronic assembly, photonics, medical and pharmaceutical manufacturing.

We at ANAGHA Systems, stocks finger cots make of latex base material and are powder free, 3 – 4 mil thick and 2 inches long.

Find here:  

Static Control Products and ESD Products in Hyderabad