Tumgik
#no cause the line distribution is so peng too
hotteoki · 11 months
Text
when they yell "STRAY KIDS" in their songs >>>>>
57 notes · View notes
mastcomm · 5 years
Text
China’s Doctors, Fighting the Coronavirus, Beg for Masks
WUHAN, China — In the hospital where Yu Yajie works, nurses, doctors and other medical professionals fighting the new coronavirus have also been fighting dire shortages. They have used tape to patch up battered protective masks, repeatedly reused goggles meant for one-time use, and wrapped their shoes in plastic bags for lack of specialized coverings.
Ms. Yu is now lying at home, feverish and fearful that she has been infected with the virus. She and other employees at the hospital said a lack of protective wear had left medical workers like her vulnerable in Wuhan, the central Chinese city at the heart of the epidemic that has engulfed this region.
“There are risks — there simply aren’t enough resources,” Ms. Yu, an administrator at Wuhan Central Hospital, said in a brief telephone interview, adding that she was too weak to speak at length.
Chinese medical workers at the forefront of the fight against the coronavirus epidemic are often becoming its victims, partly because of government missteps and logistical hurdles.
After the virus emerged in Wuhan late last year, city leaders played down its risks, so doctors didn’t take precautions. When the outbreak could no longer be ignored, officials imposed a lockdown on Wuhan that expanded across the surrounding Hubei Province and then swaths of China. The vast travel cordons may have slowed the epidemic, but have also slowed deliveries into Hubei, leaving medical workers short of protective wear.
On Friday, the Chinese government for the first time disclosed the toll the outbreak was taking on hospital employees: 1,716 medical workers had contracted the virus, including 1,502 in Wuhan, and six had died.
The strength — or vulnerability — of China’s medical workers could shape how well the Communist Party weathers its worst political crisis in years. Li Wenliang, a doctor, died from the coronavirus last week, after he had been punished by the police for warning friends of the outbreak. His death ignited fury in China, where he was lionized as a medical martyr to officials who put political control ahead of health.
“Of course I’m nervous about getting infected,” said Cai Yi, head of the division of pain management at Wuhan Central Hospital, the same hospital where Dr. Li had worked. “But if we let ourselves be nervous, then what would happen to the people?”
China’s president and Communist Party leader, Xi Jinping, has praised hospital workers in Hubei as heroes, and mobilized the country in a “people’s war” against the coronavirus. But hospital workers in Wuhan said they often felt frustrated and alone.
Updated Feb. 10, 2020
What is a Coronavirus? It is a novel virus named for the crown-like spikes that protrude from its surface. The coronavirus can infect both animals and people, and can cause a range of respiratory illnesses from the common cold to more dangerous conditions like Severe Acute Respiratory Syndrome, or SARS.
How contagious is the virus? According to preliminary research, it seems moderately infectious, similar to SARS, and is possibly transmitted through the air. Scientists have estimated that each infected person could spread it to somewhere between 1.5 and 3.5 people without effective containment measures.
How worried should I be? While the virus is a serious public health concern, the risk to most people outside China remains very low, and seasonal flu is a more immediate threat.
Who is working to contain the virus? World Health Organization officials have praised China’s aggressive response to the virus by closing transportation, schools and markets. This week, a team of experts from the W.H.O. arrived in Beijing to offer assistance.
What if I’m traveling? The United States and Australia are temporarily denying entry to noncitizens who recently traveled to China and several airlines have canceled flights.
How do I keep myself and others safe? Washing your hands frequently is the most important thing you can do, along with staying at home when you’re sick.
Some have scrambled to buy protective gear with their own money, begged from friends, or relied on donations from other parts of China and abroad. Others have avoided eating and drinking for long stretches because going to the toilet meant discarding safety gowns that they would not be able to replace. Younger staff are assigned to the more critical cases, with the expectation that if they get sick they would be more likely to recover.
Even as Chinese officials disclosed how many medical workers had been sickened and killed by the virus, key questions remain, experts said, including how the workers became infected and whether the rate of transmission was slowing. Such omissions could make it more difficult for other countries to assess and reduce their own risks.
“Clearly it would have been useful for other parts of China who are beginning to struggle with this outbreak as well for the rest of the world to have these types of data as soon as possible,” said Malik Peiris, a virologist at the University of Hong Kong.
Dr. Tedros Adhanom Ghebreyesus, director-general of the World Health Organization, said it is seeking more information about the time period and circumstances surrounding the infections of health care workers.
“This is a critical piece of information, because health workers are the glue that holds the health system and outbreak response together,” Dr. Tedros said.
Doctors and other hospital workers have also come under pressure not to speak out. But many do, out of desperation.
���For the first time, I felt helpless confronting the system,” Chang Le, a doctor at Hankou Hospital in Wuhan, said in an online message pleading for more medical masks. His plea was deleted by the censors. “It’s only today that I’ve grasped just how hard it is for us front line medical workers.”
The Chinese government has acknowledged problems in medical supplies for Hubei, and repeatedly promised to accelerate deliveries.
Strains in medical supplies may have been unavoidable as the virus spread at a pace that seemed to catch the government off guard. But the sweeping restrictions across China to contain the virus also slowed production and delivery of much-needed medical equipment, said doctors, factory managers, and aid workers.
Pervasive road checks and travel restrictions have held up shipments. Factories have faced difficulty increasing production because workers and raw materials have been blocked by lockdowns. Local governments have hoarded supplies. China’s state-controlled Red Cross has dominated distribution of donations, creating a bottleneck that infuriated hospital employees.
With medical supplies so scarce, many health care workers in Wuhan also said they had to accept substandard gowns, gloves and masks. Outside the Wuhan Fourth Hospital, medical workers waited near a truck as a delivery man in a full-body medical suit handed down boxes of masks and gowns. One hospital worker explained that the gowns were not of a high enough grade to withstand a viral contagion.
“But this is all we could get,” she said. She declined to give her name. “We just have to accept what they send us.”
Life has become a scramble, many said: treating patients for much of the day; hunting for protective gear for the rest. The shortage has forced employees, like Dr. Chang, from the city’s hospitals to appeal for donations of N95 masks — a type of respirator best suited to guarding against viruses — and other personal protective equipment on Chinese social media sites.
Dr. Peng Zhiyong, 53, head of the department of critical care medicine at Wuhan University’s Zhongnan Hospital, said in an interview this week that his team was running dangerously low on full-body medical suits and masks. “We can only get one break during the entire day,” he said. “Just one, to drink water and eat. Because if you leave, you don’t have any new suits to get back into.”
The first time the authorities publicly acknowledged a problem with medical worker infections was on Jan. 20, when an official expert revealed that 14 had been infected by a single patient. Until the government released details on Friday, details were scattershot, emerging in studies and news reports.
Dr. Peng and other researchers wrote that 40 health care professionals at his hospital had been infected in January, a third of the cases included in a study published last week in the Journal of the American Medical Association.
A 61-year-old doctor died nine days after contracting the virus from a patient, according to a report by the newspaper China Philanthropy Times.
Another doctor had started to show symptoms early last month, before medical professionals knew to take extra precautions, according to the state-run Health Times newspaper. He died this past Monday.
During the severe acute respiratory syndrome or SARS outbreak of 2002-2003, infections of medical workers became a source of anger after the government suppressed information for months. These workers made up 15 percent of confirmed cases, according to an expert, Xu Dezhong, quoted by Xinhua, China’s official news agency. About 1 percent of the medical workers infected with SARS died.
The pleas from hospitals across Hubei have inspired an outpouring of donations from Chinese businesses, workers and charities. But the surge in demand for medical equipment has been hard for suppliers to meet, especially under the lockdown.
Officials in the city of Xiantao in Hubei at first told some companies making protective medical clothing and masks that their factories could not reopen until Feb. 14. An outcry followed, and the city’s officials relented on Monday, saying that 73 of the companies could resume operations.
The roads to Hubei are also full of hurdles. In theory, the government has created “green channels” to speed through trucks carrying masks, gowns and equipment. In practice, local officials and police can hold up journeys.
One truck driver recounted being stopped 14 times for body temperature checks when he set out from Wuhan to pick up medical supplies, The Beijing News, a state-run Chinese newspaper, reported.
Guo Fei, a 27-year-old entrepreneur who has been helping to buy and deliver supplies to hospitals in Xiaogan, a city in Hubei, said his team was held by the police for around eight hours in a neighboring province, Jiangxi, when they went there to pick up an order of hygienic gloves. The police seemed to be acting for local officials who wanted to retain the supplies for their area, he said.
“I can accept government controls,” he said, “but not local protectionism.”
Doctors also criticized bureaucracy for clogging up distribution. Many donations of medical supplies must be funneled through the Red Cross, and the organization — understaffed and overwhelmed — has struggled.
In a furious social media post, Dr. Chang, the doctor at the Hankou Hospital, described his experience trying to get 10,000 N95 respirator masks from the Red Cross. He was eventually given more than 9,000 masks of inferior quality, he said.
“I just wanted to cry,” he said at the end of his video message.
Premier Li Keqiang of China, who oversees a policy team for the crisis, said in early February that “unified national management” would help overcome equipment shortages.
Just a week later, China’s Politburo Standing Committee, the Communist Party’s top most council, said problems with insufficient beds, medical personnel and other medical resources persisted across Hubei. According to official data from the province, deliveries of high-quality masks and other items have accelerated in recent days.
The country’s health facilities are not only facing an acute shortage of personal protective equipment — they may also be using the wrong gear.
Health workers in China generally have been following the W.H.O.’s guidelines to use so-called “standard precautions” which include surgical masks, rather than more expensive N95 masks, to cover their mouths and noses. The Centers for Disease Control and Prevention, on the other hand, has instructed health care providers to use N95s, which block out much smaller particles than surgical masks do.
Until conditions markedly improve, medical workers will still be forced to make hard adjustments. Dr. Cai, from Wuhan Central Hospital, said he has assigned younger medical workers to treat coronavirus patients to avoid endangering more seasoned employees. “To be honest, if older doctors get infected, their immune system is much weaker,” he said.
Dr. Peng of Zhongnan Hospital said more attention had to be paid to the fate of medical workers. “Because when the country doesn’t have any more medical workers, then what hope is there left?”
Sui-Lee Wee reported from Singapore. Elsie Chen contributed research from Wuhan. Roni Caryn Rabin contributed reporting from New York. Amber Wang, Wang Yiwei and Zoe Mou contributed research from Beijing.
from WordPress https://mastcomm.com/chinas-doctors-fighting-the-coronavirus-beg-for-masks/
0 notes
Link
Piping Design
Piping Stress Analysis
Engineering Services
Little P.Eng. for Piping Design and Engineering Services | Calgary, AB
January 22, 2018
P.Eng.
Meena Rezkallah
Piping Design and Engineering Services
Little P.Eng. for Engineering Services offers a complete package of piping design and engineering services:
   Producing the piping drawings based on field data.
   Design of the piping systems and mechanical components.
   Performing the pipe stress analysis.
   Producing the calculation’s drawings, to report the loads acting on the pipe supports.
   Performing the structural and seismic analysis on pipe supports, anchors and guides design, performing finite element analysis, and hanger selection.
Pips Stress Analysis
Little P.Eng. for Engineering Services performs Pipe Stress Analysis based on ASME codes (American Boiler and Pressure vessel). ASME codes cover the design, analysis, manufacturing and inspection of pressure vessels, piping and supporting structures. It represents a complete set of rules for the analysis of the mechanical components too.
We perform pipe stress analysis for the various load conditions such as:
Normal Operating Conditions
Upset Conditions
Emergency Conditions
Faulted Conditions
We follow ASME B31 codes in piping design and engineering for power and process plants and industrial and commercial facilities under very different loading conditions like as weight, thermal, seismic and other dynamic loads. Little P.Eng. for Engineering Services uses ASME section III codes and NRC regulations in piping design of power plants.
We perform static analysis for the following loading conditions:
Pressure: Operating pressure or upset condition pressures.
Deadweight: This loading condition consists of the weight of pipe, medium, insulation and any attachment to the pipelines.
Wind Loads: This loading condition is a dynamic condition but normally analysed as equivalent static condition.
Thermal Loads: This loading condition is induced by different thermal transients.
Thermal Stratification: This loading condition occurs in the connecting pipes in a horizontal plane between two reservoirs with fluid at different temperatures with small flow rates. This initiates an extra bending stress and creates local stresses in the pipe cross section due to a nonlinear circumferential metal temperature distribution. Pressurizers’ surge lines are one of the places where thermal stratification occurs.
Equipment Movements: This loading condition causes the movement of pipes due to thermal movement of the equipment or pressure vessels and the movement of the pipe supports due to seismic loads.
Dynamic analysis are performed for the following occasional loading conditions:
Water Hammer/Steam Hammer Loads (Transient slug analysis) : This loading condition occurs as a result of events that trigger hydraulic transients (like as operational changes). These events may be due to valve opening/closure, pump start-up or a pump trip. Such events result in pressure waves which travel through the piping systems in a complicated manner including reflected waves, etc.
Vessel Vibrations: Induced by pipe breaks in pressure vessels, pumps, and valves.
Seismic (Earthquake) and Other Building Induced Loads: This is constituted by the dynamic pipe support movements, during a seismic event, and the response to these movements depends on the dynamic characteristics of the considered piping systems and their attachments in relation to the characteristics of the loading.
We perform Finite Element Analysis for the following occasional loading conditions (earthquake, water hammer, etc.).
Transient dynamic analysis yields the response of the piping system, if the dynamic excitations are known in terms of time histories of support movements.
Response spectrum analysis is used in the assessment of structural integrity, if the loads are given in terms of the floor response spectrum. If not, we can even provide the floor response spectrum too, based on the ground motion at the site location.
Equivalent static analysis can be used when just the ground movements are available, based on ASCE 7-10.
Structural Analysis of Pipe Support
Little P.Eng. for Engineering Services performs the Pipe Support Stress Analysis based on ASME and AISC codes (American Institute of Steel Construction). We perform the structural analyses based on ASME section VIII for the supporting structures of the piping systems evaluated by ASME B31 codes (power and process pipelines). We use ASME section III for the analysis of pipe supports of the nuclear piping systems.
Little P.Eng. for Engineering Services engineers create 3D models of the pipe supports and perform the finite element analysis on them. So you can see an analysed 3D models of the pipe supports in the stress report.
Structural Analysis of Pipelines Mechanical Components
Little P.Eng. for Engineering Services performs more refined Finite Element Analysis on the piping components such as valves, flanges, nozzles, weld lugs, embedded welding plates and wall penetrations, etc. Our analyses are based on ASME Section VIII, Division II, and WRC Bulletins 107, 297 and 368. ASME section III is used for the structural analysis of the piping equipment of the nuclear piping systems.
Beside data provided in ASME codes and WRC's Bulletins, Little P.Eng. for Engineering Services performs advanced finite element analysis to estimate the SIFs (Stress Intensification Factors) for different piping components like as tees, bends, etc.
Our professional piping stress engineers have a bachelor's degree in mechanical / structural engineering and province licence (P.Eng.) in Alberta, Saskatchewan, British Columbia and Ontario. We review, validate, certify and stamp piping and structural packages.
#Little_PEng
Engineering Consultant Services
Meena Rezkallah
Pipe Stress Analysis Services
TAGS:
Piping Design
Engineering Services
Engineering Services Calgary
Engineering Consulting Services
Engineering Consulting Services Saskatchewan
Engineering Consulting Services Ontario
Engineering Consulting Services BC
0 notes
Link
Little P.Eng. for Piping Design and Engineering Services | Calgary, AB
January 22, 2018
P.Eng.
Meena Rezkallah
Piping Design and Engineering Services
Little P.Eng. for Engineering Services offers a complete package of piping design and engineering services:
   Producing the piping drawings based on field data.
   Design of the piping systems and mechanical components.
   Performing the pipe stress analysis.
   Producing the calculation’s drawings, to report the loads acting on the pipe supports.
   Performing the structural and seismic analysis on pipe supports, anchors and guides design, performing finite element analysis, and hanger selection.
Pips Stress Analysis
Little P.Eng. for Engineering Services performs Pipe Stress Analysis based on ASME codes (American Boiler and Pressure vessel). ASME codes cover the design, analysis, manufacturing and inspection of pressure vessels, piping and supporting structures. It represents a complete set of rules for the analysis of the mechanical components too.
We perform pipe stress analysis for the various load conditions such as:
Normal Operating Conditions
Upset Conditions
Emergency Conditions
Faulted Conditions
We follow ASME B31 codes in piping design and engineering for power and process plants and industrial and commercial facilities under very different loading conditions like as weight, thermal, seismic and other dynamic loads. Little P.Eng. for Engineering Services uses ASME section III codes and NRC regulations in piping design of power plants.
We perform static analysis for the following loading conditions:
Pressure: Operating pressure or upset condition pressures.
Deadweight: This loading condition consists of the weight of pipe, medium, insulation and any attachment to the pipelines.
Wind Loads: This loading condition is a dynamic condition but normally analysed as equivalent static condition.
Thermal Loads: This loading condition is induced by different thermal transients.
Thermal Stratification: This loading condition occurs in the connecting pipes in a horizontal plane between two reservoirs with fluid at different temperatures with small flow rates. This initiates an extra bending stress and creates local stresses in the pipe cross section due to a nonlinear circumferential metal temperature distribution. Pressurizers’ surge lines are one of the places where thermal stratification occurs.
Equipment Movements: This loading condition causes the movement of pipes due to thermal movement of the equipment or pressure vessels and the movement of the pipe supports due to seismic loads.
Dynamic analysis are performed for the following occasional loading conditions:
Water Hammer/Steam Hammer Loads (Transient slug analysis) : This loading condition occurs as a result of events that trigger hydraulic transients (like as operational changes). These events may be due to valve opening/closure, pump start-up or a pump trip. Such events result in pressure waves which travel through the piping systems in a complicated manner including reflected waves, etc.
Vessel Vibrations: Induced by pipe breaks in pressure vessels, pumps, and valves.
Seismic (Earthquake) and Other Building Induced Loads: This is constituted by the dynamic pipe support movements, during a seismic event, and the response to these movements depends on the dynamic characteristics of the considered piping systems and their attachments in relation to the characteristics of the loading.
We perform Finite Element Analysis for the following occasional loading conditions (earthquake, water hammer, etc.).
Transient dynamic analysis yields the response of the piping system, if the dynamic excitations are known in terms of time histories of support movements.
Response spectrum analysis is used in the assessment of structural integrity, if the loads are given in terms of the floor response spectrum. If not, we can even provide the floor response spectrum too, based on the ground motion at the site location.
Equivalent static analysis can be used when just the ground movements are available, based on ASCE 7-10.
Structural Analysis of Pipe Support
Little P.Eng. for Engineering Services performs the Pipe Support Stress Analysis based on ASME and AISC codes (American Institute of Steel Construction). We perform the structural analyses based on ASME section VIII for the supporting structures of the piping systems evaluated by ASME B31 codes (power and process pipelines). We use ASME section III for the analysis of pipe supports of the nuclear piping systems.
Little P.Eng. for Engineering Services engineers create 3D models of the pipe supports and perform the finite element analysis on them. So you can see an analysed 3D models of the pipe supports in the stress report.
Structural Analysis of Pipelines Mechanical Components
Little P.Eng. for Engineering Services performs more refined Finite Element Analysis on the piping components such as valves, flanges, nozzles, weld lugs, embedded welding plates and wall penetrations, etc. Our analyses are based on ASME Section VIII, Division II, and WRC Bulletins 107, 297 and 368. ASME section III is used for the structural analysis of the piping equipment of the nuclear piping systems.
Beside data provided in ASME codes and WRC's Bulletins, Little P.Eng. for Engineering Services performs advanced finite element analysis to estimate the SIFs (Stress Intensification Factors) for different piping components like as tees, bends, etc.
#Little_PEng
Engineering Consultant Services
Meena Rezkallah
TAGS:
Piping Design
Engineering Services
Engineering Services Calgary
0 notes
Link
Meena Rezkallah, P.Eng.
Little P.Eng. for Piping Design and Engineering Services | Calgary, AB
Piping Design and Engineering Services
Little P.Eng. for Engineering Services offers a complete package of piping design and engineering services:
   Producing the piping drawings based on field data.  
   Design of the piping systems and mechanical components.  
   Performing the pipe stress analysis.  
   Producing the calculation’s drawings, to report the loads acting on the pipe supports.  
   Performing the structural and seismic analysis on pipe supports, anchors and guides design, performing finite element analysis, and hanger selection.  
Pips Stress Analysis Services
Little P.Eng. for Engineering Services performs Pipe Stress Analysis based on ASME codes (American Boiler and Pressure vessel). ASME codes cover the design, analysis, manufacturing and inspection of pressure vessels, piping and supporting structures. It represents a complete set of rules for the analysis of the mechanical components too.
We perform pipe stress analysis for the various load conditions such as:
Normal Operating Conditions  
Upset Conditions  
Emergency Conditions  
Faulted Conditions
We follow ASME B31 codes in piping design and engineering for power and process plants and industrial and commercial facilities under very different loading conditions like as weight, thermal, seismic and other dynamic loads. Little P.Eng. for Engineering Services uses ASME section III codes and NRC regulations in piping design of power plants.
We perform static analysis for the following loading conditions:
Pressure: Operating pressure or upset condition pressures.  
Deadweight: This loading condition consists of the weight of pipe, medium, insulation and any attachment to the pipelines.  
Wind Loads: This loading condition is a dynamic condition but normally analyzed as equivalent static condition.  
Thermal Loads: This loading condition is induced by different thermal transients.  
Thermal Stratification: This loading condition occurs in the connecting pipes in a horizontal plane between two reservoirs with fluid at different temperatures with small flow rates. This initiates an extra bending stress and creates local stresses in the pipe cross section due to a nonlinear circumferential metal temperature distribution. Pressurizers’ surge lines are one of the places where thermal stratification occurs.  
Equipment Movements: This loading condition causes the movement of pipes due to thermal movement of the equipment or pressure vessels and the movement of the pipe supports due to seismic loads.
Dynamic analysis are performed for the following occasional loading conditions:
Water Hammer/Steam Hammer Loads (Transient slug analysis) : This loading condition occurs as a result of events that trigger hydraulic transients (like as operational changes). These events may be due to valve opening/closure, pump start-up or a pump trip. Such events result in pressure waves which travel through the piping systems in a complicated manner including reflected waves, etc.  
Vessel Vibrations: Induced by pipe breaks in pressure vessels, pumps, and valves.  
Seismic (Earthquake) and Other Building Induced Loads: This is constituted by the dynamic pipe support movements, during a seismic event, and the response to these movements depends on the dynamic characteristics of the considered piping systems and their attachments in relation to the characteristics of the loading.
We perform Finite Element Analysis for the following occasional loading conditions (earthquake, water hammer, etc.).
Transient dynamic analysis yields the response of the piping system, if the dynamic excitations are known in terms of time histories of support movements.  
Response spectrum analysis is used in the assessment of structural integrity, if the loads are given in terms of the floor response spectrum. If not, we can even provide the floor response spectrum too, based on the ground motion at the site location.  
Equivalent static analysis can be used when just the ground movements are available, based on ASCE 7-10.
Structural Analysis of Pipe Support
Little P.Eng. for Engineering Services performs the Pipe Support Stress Analysis based on ASME and AISC codes (American Institute of Steel Construction). We perform the structural analyses based on ASME section VIII for the supporting structures of the piping systems evaluated by ASME B31 codes (power and process pipelines). We use ASME section III for the analysis of pipe supports of the nuclear piping systems.
Little P.Eng. for Engineering Services engineers create 3D models of the pipe supports and perform the finite element analysis on them. So you can see an analyzed 3D models of the pipe supports in the stress report.
Structural Analysis of Pipelines Mechanical Components
Little P.Eng. for Engineering Services performs more refined Finite Element Analysis on the piping components such as valves, flanges, nozzles, weld lugs, embedded welding plates and wall penetrations, etc. Our analyses are based on ASME Section VIII, Division II, and WRC Bulletins 107, 297 and 368. ASME section III is used for the structural analysis of the piping equipment of the nuclear piping systems.
Beside data provided in ASME codes and WRC's Bulletins, Little P.Eng. for Engineering Services performs advanced finite element analysis to estimate the SIFs (Stress Intensification Factors) for different piping components like as tees, bends, etc.
Our professional piping stress engineers have a bachelor's degree in mechanical / structural engineering and province license (P.Eng.) in Alberta, Saskatchewan, British Columbia and Ontario. We review, validate, certify and stamp piping and structural packages.
#Little_PEng
Engineering Consultant Services
Meena Rezkallah
Pipe Stress Analysis Services
#piping_engineering_services #piping_engineering_consultant #piping_skid_design #piping_stress_analysis #piping_engineering_firm #piping_engineering_company #asme #engineeringservices #engineering #engineers #engineer #engineering_services #engineering_firm #engineering_company #engineering_consultant #pipe_stress_analysis #pipes #calgary #meena_rezkallah #pipe_stress_engineer #piping_stress_engineer #pipe_stress_analysis_services #edmonton #pipe_stress_analysis_company #ontario #pipe_stress_analysis_firm #piping_standards #CAESAR_II #pipingengineer #pipingstressengineer #BC #Vancouver #British_Columbia #toronto #fortmcmurray #saskatchewan #skid_design #jobs #engineering_consultant #Engineering_Company #Piping_Engineering_Company #Structural_Engineering_Company #Engineering_Firm #Piping_Engineering_Firm #Structural_Engineering_Firm #Canada #Alberta #Ontario #Saskatchewan #British_Columbia #Piping_Engineer #Piping_Stress_Engineer #Structural_Engineer #Meena_Rezkallah #Pipe_Stress_Analysis_Company #Pipe_Stress_Analysis_Firm #Pipeline_Engineering_Company #Pipeline_Engineering_Firm #Saudi_Arabia #United_Arab_Emirates #Oman #Qatar #Kuwait #Dubai #ABU_DHABI #Texas #Houston #Steel_Shop_drawings #Stair_Shop_drawing #Handrail_Shop_Drawing #Sheet_Metal_Shop_drawings #Miscellaneous_Drawings #Millwork_drawings #Steel_Fabrication_Drawing #Erection_and_GA_diagrams #Cabinets_Shop_Drawing #Shop_Drawings​ #Spool_Darwings​ #Shop_Drawings_Outsourcing​ #Piping_Design_Services​ #Steel_Shop_drawings​  #Steel_Fabrication_Drawing​ #Piping_orthognal_drawing
Tags:
Piping Design
Engineering Services
Engineering Services Calgary
Engineering Company
Piping Engineering Company
Structural Engineering Company
Engineering Firm
Piping Engineering Firm
Structural Engineering Firm
Canada
Alberta
Ontario
Saskatchewan
British Columbia
Piping Engineer
Piping Stress Engineer
Structural Engineer
Meena Rezkallah
Pipe Stress Analysis Company
Pipe Stress Analysis Firm
Engineering Consultant
Pipeline Engineering Company
Pipeline Engineering Firm
Saudi Arabia
United Arab Emirates
CAESAR II
TEXAS
Calgary
Vancouver
Toronto
Engineering Services
Piping Design
Piping Stress Analysis
Engineering Consultant Services Calgary, AB
Engineering Consultant Services Edmonton, AB
Engineering Consultant Services Fort McMurray, AB
Engineering Consultant Toronto
Engineering Consultant Services Toronto, ON
Engineering Consultant Services Vancouver, BC
Engineering Consultant Services Saskatchewan
Engineering Consultant Services Houston, Texas
Engineering Consultant Services Middle East
Engineering Consultant Ontario
Engineering Consultant Services Torrance, California
Engineering Consultant Services Buena Park, California
0 notes