#servo_gearbox

[smdgearbox]

We have launched a new series in our gearboxes with more Accuracy, Rigidity, High torque output and Sizes to match the customer requirement. The working cycle at nominal output torque has also increased from 10,000 working cycle to 20,000 working cycle. The latest series in SMD Gearbox offers ingress protection of IP 64.

 For More information, Visit

Website - https://www.smdgearbox.com/products

Reference Link - https://pin.it/mur8IbY

[technicallysupercupcake]

Servo Gearbox Manufacturers| SMD Gearbox

What is Servo Motor?

There are different types of electric motors available in the market. The choice of these motors can be based on the operation and voltage of the applications. Motor applications sometimes require motor rotation to stop at a certain angle with a minimum backlash rate for the typical output used by servo motors in electronic applications. A servo motor is basically a DC motor that connects the driver and encoder to become a servo motor. Servo motor can give output up to 3000 rpm. With the help of a driver you can control it. The encoder is connected to the driver which sends feedback and signals to the drivers on how to operate. The driver acts according to the signal passed through the encoder. The components of servo motor are mentioned in the picture below.      

WHAT IS A NEED OF SERVO GEARBOX?

The main reason for using servo motor in any electronic application is to control its speed, in applications where the rotation of the motor must be stopped at a certain angle. When the servo motor stops at a certain angle the gearbox must also stop at the same point so that the gearbox must come with a very low backlash rate. Servo gearboxes provide multiplication, speed reduction and inertia matching for motorized systems. When a gearbox is attached to a servo motor, the rotating speed given by the motor can be reduced by the number of gear ratios which allows the application to make better use of the speed torque feature of the servo motor. Servo motors require gearboxes that can provide high torque with low added inertia, high accuracy. The servo gearbox takes the input of the motor and transmits the precisely calculated output to the application, which helps the application to give accurate results. The most important advantage of using a gearbox in a servo system is the effect it has on the inertia of the load. The load inertia, which is reflected on the motor, is reduced by the square of the gear ratio. Therefore, even a relatively small gear reduction can have a significant effect on the inertia ratio.

Servo Gearboxes mainly known as precision gearing series. Servos are an electromagnetic device that converts electricity into precise controlled motion by use of negative feedback systems. Hence this system mainly used into the precise operations such as Laser printing, water jet cutting, semiconductors, pharmaceutical industries.  

SMD Gearbox- Servo Gearbox Manufacturer

Seimitsu Motion Drives is a gearbox solution provider. It is a Taiwan based organization with overseas office in India. SMD Gearbox has a long list of satisfied customers. All SMD gearboxes can be used for servo motors. SMD's gearbox comes with attractive features like minimum backlash rate. SMD has a wide range of different ratio gearboxes to integrate with the specifications of your application. All gearboxes operate at a backlash rate of less than 1 arc-min which helps the servo motor to produce accurate output. The minimum backlash is that the gearbox will stop at the exact angle at which the application is to be stopped. Nowadays almost all applications use servo motor due to its efficiency and hence the market for servo gearbox is growing day by day. SMD gearboxes are as follows:

1.     Planetary or Inline gearbox with flange End

·         Nominal Output Torque : 12Nm to 530Nm

·         Backlash: Less than 1 Arc-min.

·         Available reduction ratios from 1:3 to 1:100.

·         Design to use with various servomotors.

·         Sealed shut design; self-lubricated and easy to install

·         High torque capacity and low inertia.

2.     Planetary or Inline gearbox with shaft End

·         Nominal Output Torque : 25Nm to 350Nm.

·         Backlash: Less than 1 Arc-min.

·         Available reduction ratios from 1:3 to 1:100

·         Easily coupled to servo gearmotor.

·         High load carrying capacity.

·         Highly rigid.

3.     Right angle Gearbox

·         Hollow shaft Type and solid shaft type

·         Nominal Output Torque : 13Nm to 800Nm

·         Backlash : 3-5 Arc-min

·         Available reduction ratio from 1:4 to 1:200

·         Suitable for low load and intermitted motion.

·         Servo-motor gearbox

4. Hollow Rotary Gearbox

·         Nominal output torque: 3 Nm to 90 Nm

·         Backlash : 0.5arc-min

·         Direct attachment with simple and reliable design.

·         Large hollow rotary table for concise wiring and piping.

·         Accurate and fast positioning.

·         Repeat origin returns easily.

5.     Harmonic Gearbox with solid shaft

·         Nominal Output torque : 21Nm to 180Nm

·         Backlash : less than 0.4 Arc min

·         Available reduction ratio :1:50,1:80 1:100, 1:120

·         High rigidity for stable precision work.

·         More compact and higher accurate.

·         Applied in robot industry, especially for multi-axis robot joints.

 6.     Harmonic Gearbox with Hollow shaft

·         Diverse appearance; suitable for robot arm.

·         Precision: less than 0.4 Arc-min.

·         Torque Capacity: 20Nm to 180Nm

·         Available reduction ratios 1:50 ,1:80, 1:100, 1:120

·         Short axial dimension.

·         High rigidity for stable precision work.

·         More compact and higher accurate.

7.     Cycloidal Gearbox

·         Rated Output Torque : 72Nm to 4410Nm

·         Backlash : Less than 1 Arc-min.

·         Ratio : 1:82 to 1:300 for case run.

·         High load impact resistance

·         Compact and light weight

SMD Gearbox is committed to developing its business through different growth strategies: expanding the geographical range of its operations through full scale globalization, purposefully expanding its domains through the development of new business areas, and utilizing technology. To know more how SMD gearbox can help you in your system automation visit our website www.smdgearbox.com or you can mail us for personal assistance on sales@smdgearbox.com.  

[smdgearbox]

SMD Gearbox is now an Eminent, Emerged and Elegant Gearbox Brand in Global Market. In short Period Company has reached on Successful Horizon. SMD not on provides Servo Gearbox but also provides a lot of Technical Information, 24/7 Services, Expert Guidance with Gearbox thus helps the Clients to use their Machines in more productive way. In a future perspective We aim to provide our best services to our clients at the highest satisfaction level.

 For More Information, Please Click on  - https://www.smdgearbox.com/about-us

Video Link - https://youtu.be/vSoKnSwqt-U

[smdgearbox]

Hollow Rotary Gearbox is used in various products such as Indexing Table. This Hollow Rotary Reducer is combined with an adapter having solid shaft input hence can be coupled with a Coupling and Motor directly. This Hollow Rotary Gearbox can be coupled with Planetary and Right Angle to achieve higher ratio. This Gearbox is available in various sizes starting from frame size ST85 to ST320 with normal ratio from 1:10 and if coupled with Planetary gearbox &Right Angle ratio raise upto 1:1000 and 1:2000 so on.

 Website - https://www.smdgearbox.com/hollow-rotary-gearbox

Reference Image - https://imgur.com/gallery/jWnAlqX

[smdgearbox]

A Rack and pinion are used to convert rotary motion into precise linear motion where pinion transmits rotary motion to Rack teeth’s and Rack moves linearly. The rack carries the full load of the actuator directly and so the driving pinion is usually small hence the gear ratio reduces the torque required. Racks and Pinions are used in variety of applications like Lifting system, Machine tool, Gantry system etc. SMD provides Rack and Pinions with Induction Hardening and laser Hardening of Teeth.

 𝐑𝐚𝐧𝐠𝐞 𝐨𝐟 𝐒𝐌𝐃 𝐑𝐚𝐜𝐤 & 𝐏𝐢𝐧𝐢𝐨𝐧 :-𝐑𝐀𝐂𝐊 –

Length -  500 to 2000

2000+ Available in customized Solution.

Module – 1 to 10 Range.

𝐏𝐈𝐍𝐈𝐎𝐍 –

Size and Module is equivalent to the size and Module of Rack.

𝐅𝐨𝐫 𝐌𝐨𝐫𝐞 𝐓𝐞𝐜𝐡𝐧𝐢𝐜𝐚𝐥 𝐈𝐧𝐟𝐨𝐫𝐦𝐚𝐭𝐢𝐨𝐧 :-

Visit - https://www.smdgearbox.com/products

Reference Image - https://www.behance.net/gallery/138448517/Rack-and-Pinion-System-SMD-Gearbox

Mail ID – sales@smdgearbox.com

Phone No. - +886 (09) 67388376 / +91 7030669818

[smdgearbox]

SMD is Introducing all new types of Harmonic Gearbox with diversified appearance which can be widely used for various applications especially for Robotic Arms. This Harmonic Gear Reducer has short axial dimensions, High Rigidity and more compact. They are used in Multi Axial Joint applications in robotics industry because of its higher accuracy and high precision work. SMD Strain Wave Gearbox has wide range of Ratio and Torque to select according to customer needs ranging from 1:50 to 1:160 and torque ranging from 2 Nm to 530 Nm.

For More Technical Information :-

Visit - https://www.smdgearbox.com/harmonic-gearbox-with-solid-shaft-end

Reference Link - https://imgur.com/gallery/zpLhj6b

Mail ID – sales@smdgearbox.com

Phone No. - +886 (09) 67388376 / +91 7030669818

[smdgearbox]

SMD Gearboxes are Servo Motor Gearbox which are more precise and accurate for any operations. A Servo motor is a self-contained electromechanical device that allows for powerful and precise positioning control. In SMD Servo gearbox output is easily measurable and variety of outputs can be drawn from gearboxes.

How to Choose Servo Gearbox?

As Servo gearbox are used for continuous rotational use thus the specific type of gearbox is used in the event of different application and space requirements.

SMD Planetary Gearbox - For high system rigidity, compactness, and high torque.

SMD bevel Gearbox - For larger sizes, better versatility, and higher efficiency.

SMD Hybrid Gearbox - For applications requiring the best features of both planetary and spiral bevel gearboxes.

 For More Technical Information :-

Visit - https://www.smdgearbox.com/products

Reference Link - https://www.behance.net/gallery/135675763/Servo-Motor-Gearbox-Manufacturer-SMD-Gearbox

Mail ID – sales@smdgearbox.com

Phone No. - +886 (09) 67388376 / +91 7030669818

[smdgearbox]

SMD Inline and Right Angle Gearbox are mainly know for its Best performance, its High Accuracy and wide range of Ratios, makes these Gearboxes very effective to be used in various types of Machine Manufacturing Industry.

SNP 60 and SS 70 are most commonly used reducer in Automation and SPM. Its 40 Nm Nominal Torque capacity makes this Gearbox to be used with 400 or 750 watt motors. Standard Backlash of 5 arc min and reduce Backlash of 1 arc min range property make this reducer to be known by high precision servo gearbox.

SMD Provides various mounting adaptor solutions which helps to attach any size of Servo directly without any difficulty. In special cases SMD also provides round flange in an output to match customer requirements without charging them extra. The early supply due to in stock material and quick service makes SMD to be a Global  well known Brand.

For More Technical Information :-

Visit -https://www.smdgearbox.com/products

Reference link - https://in.pinterest.com/pin/739716307555026359

Mail ID – sales@smdgearbox.com

Phone No. - +886 (09) 67388376 / +91 7030669818

[smdgearbox]

Servo Gearbox mainly known as precision gearing series. Servos are electromagnetic device that converts electricity into precise controlled motion by use of negative feedback systems. Hence this system is mainly used into precise operations such as laser printing, water jet cutting, semi-conductor industries, Pharmaceutical Industries.

           SMD is the solution provider of the Gearbox that can be used in the similar applications combining with servo motors to control its motion to the next level which has backlash less than 1 arc min in every series.

For More Technical Information :-

Visit - https://www.smdgearbox.com/products

Imgur Reference - https://imgur.com/gallery/QmHuQj2

Mail ID – sales@smdgearbox.com

Phone No. - +886 (09) 67388376 / +91 7030669818