#smd_servo_gearbox

[smdgearbox]

SMD Gearbox is now an Eminent, Emerged and Elegant Gearbox Brand in Global Market. In short Period Company has reached on Successful Horizon. SMD not on provides Servo Gearbox but also provides a lot of Technical Information, 24/7 Services, Expert Guidance with Gearbox thus helps the Clients to use their Machines in more productive way. In a future perspective We aim to provide our best services to our clients at the highest satisfaction level.

 For More Information, Please Click on  - https://www.smdgearbox.com/about-us

Video Link - https://youtu.be/vSoKnSwqt-U

[technicallysupercupcake]

Servo Gearbox Manufacturers| SMD Gearbox

What is Servo Motor?

There are different types of electric motors available in the market. The choice of these motors can be based on the operation and voltage of the applications. Motor applications sometimes require motor rotation to stop at a certain angle with a minimum backlash rate for the typical output used by servo motors in electronic applications. A servo motor is basically a DC motor that connects the driver and encoder to become a servo motor. Servo motor can give output up to 3000 rpm. With the help of a driver you can control it. The encoder is connected to the driver which sends feedback and signals to the drivers on how to operate. The driver acts according to the signal passed through the encoder. The components of servo motor are mentioned in the picture below.      

WHAT IS A NEED OF SERVO GEARBOX?

The main reason for using servo motor in any electronic application is to control its speed, in applications where the rotation of the motor must be stopped at a certain angle. When the servo motor stops at a certain angle the gearbox must also stop at the same point so that the gearbox must come with a very low backlash rate. Servo gearboxes provide multiplication, speed reduction and inertia matching for motorized systems. When a gearbox is attached to a servo motor, the rotating speed given by the motor can be reduced by the number of gear ratios which allows the application to make better use of the speed torque feature of the servo motor. Servo motors require gearboxes that can provide high torque with low added inertia, high accuracy. The servo gearbox takes the input of the motor and transmits the precisely calculated output to the application, which helps the application to give accurate results. The most important advantage of using a gearbox in a servo system is the effect it has on the inertia of the load. The load inertia, which is reflected on the motor, is reduced by the square of the gear ratio. Therefore, even a relatively small gear reduction can have a significant effect on the inertia ratio.

Servo Gearboxes mainly known as precision gearing series. Servos are an electromagnetic device that converts electricity into precise controlled motion by use of negative feedback systems. Hence this system mainly used into the precise operations such as Laser printing, water jet cutting, semiconductors, pharmaceutical industries.  

SMD Gearbox- Servo Gearbox Manufacturer

Seimitsu Motion Drives is a gearbox solution provider. It is a Taiwan based organization with overseas office in India. SMD Gearbox has a long list of satisfied customers. All SMD gearboxes can be used for servo motors. SMD's gearbox comes with attractive features like minimum backlash rate. SMD has a wide range of different ratio gearboxes to integrate with the specifications of your application. All gearboxes operate at a backlash rate of less than 1 arc-min which helps the servo motor to produce accurate output. The minimum backlash is that the gearbox will stop at the exact angle at which the application is to be stopped. Nowadays almost all applications use servo motor due to its efficiency and hence the market for servo gearbox is growing day by day. SMD gearboxes are as follows:

1.     Planetary or Inline gearbox with flange End

·         Nominal Output Torque : 12Nm to 530Nm

·         Backlash: Less than 1 Arc-min.

·         Available reduction ratios from 1:3 to 1:100.

·         Design to use with various servomotors.

·         Sealed shut design; self-lubricated and easy to install

·         High torque capacity and low inertia.

2.     Planetary or Inline gearbox with shaft End

·         Nominal Output Torque : 25Nm to 350Nm.

·         Backlash: Less than 1 Arc-min.

·         Available reduction ratios from 1:3 to 1:100

·         Easily coupled to servo gearmotor.

·         High load carrying capacity.

·         Highly rigid.

3.     Right angle Gearbox

·         Hollow shaft Type and solid shaft type

·         Nominal Output Torque : 13Nm to 800Nm

·         Backlash : 3-5 Arc-min

·         Available reduction ratio from 1:4 to 1:200

·         Suitable for low load and intermitted motion.

·         Servo-motor gearbox

4. Hollow Rotary Gearbox

·         Nominal output torque: 3 Nm to 90 Nm

·         Backlash : 0.5arc-min

·         Direct attachment with simple and reliable design.

·         Large hollow rotary table for concise wiring and piping.

·         Accurate and fast positioning.

·         Repeat origin returns easily.

5.     Harmonic Gearbox with solid shaft

·         Nominal Output torque : 21Nm to 180Nm

·         Backlash : less than 0.4 Arc min

·         Available reduction ratio :1:50,1:80 1:100, 1:120

·         High rigidity for stable precision work.

·         More compact and higher accurate.

·         Applied in robot industry, especially for multi-axis robot joints.

 6.     Harmonic Gearbox with Hollow shaft

·         Diverse appearance; suitable for robot arm.

·         Precision: less than 0.4 Arc-min.

·         Torque Capacity: 20Nm to 180Nm

·         Available reduction ratios 1:50 ,1:80, 1:100, 1:120

·         Short axial dimension.

·         High rigidity for stable precision work.

·         More compact and higher accurate.

7.     Cycloidal Gearbox

·         Rated Output Torque : 72Nm to 4410Nm

·         Backlash : Less than 1 Arc-min.

·         Ratio : 1:82 to 1:300 for case run.

·         High load impact resistance

·         Compact and light weight

SMD Gearbox is committed to developing its business through different growth strategies: expanding the geographical range of its operations through full scale globalization, purposefully expanding its domains through the development of new business areas, and utilizing technology. To know more how SMD gearbox can help you in your system automation visit our website www.smdgearbox.com or you can mail us for personal assistance on sales@smdgearbox.com.  

[smdgearbox]

SMD Right Angle Gearbox (SS Series) is used to transmit rotary motion in 90 degrees as if desired direction. This series comes with Planetary Reducer attached which has total reduction ratio ranging from 1:4 to 1:200 with a total torque capacity. These models available for Gearboxes ranges from  SS42, SS70, SS90, SS120, SS150 and SS180 and are customizable with Shaft or Flange End according to the Application.

 To Know More –

Website - https://www.smdgearbox.com/right-angle-gearbox

Reference Link - https://pin.it/3PXlODQ

[smdgearbox]

SMD Gearboxes are Servo Motor Gearbox which are more precise and accurate for any operations. A Servo motor is a self-contained electromechanical device that allows for powerful and precise positioning control. In SMD Servo gearbox output is easily measurable and variety of outputs can be drawn from gearboxes.

How to Choose Servo Gearbox?

As Servo gearbox are used for continuous rotational use thus the specific type of gearbox is used in the event of different application and space requirements.

SMD Planetary Gearbox - For high system rigidity, compactness, and high torque.

SMD bevel Gearbox - For larger sizes, better versatility, and higher efficiency.

SMD Hybrid Gearbox - For applications requiring the best features of both planetary and spiral bevel gearboxes.

 For More Technical Information :-

Visit - https://www.smdgearbox.com/products

Reference Link - https://www.behance.net/gallery/135675763/Servo-Motor-Gearbox-Manufacturer-SMD-Gearbox

Mail ID – sales@smdgearbox.com

Phone No. - +886 (09) 67388376 / +91 7030669818

[smdgearbox]

Servo Gearbox mainly known as precision gearing series. Servos are electromagnetic device that converts electricity into precise controlled motion by use of negative feedback systems. Hence this system is mainly used into precise operations such as laser printing, water jet cutting, semi-conductor industries, Pharmaceutical Industries.

           SMD is the solution provider of the Gearbox that can be used in the similar applications combining with servo motors to control its motion to the next level which has backlash less than 1 arc min in every series.

For More Technical Information :-

Visit - https://www.smdgearbox.com/products

Imgur Reference - https://imgur.com/gallery/QmHuQj2

Mail ID – sales@smdgearbox.com

Phone No. - +886 (09) 67388376 / +91 7030669818