theprinterfix

[theprinterfix]

Learn About How Can You Connect Your HP Printer to Wi-Fi

1. Connect your HP Printer to WiFi Via Wireless Setup Wizard for the Touchscreen Control Panel

Make sure your HP printer is in the area of the hotspot or WiFi network.

Then, tap the Wireless icon in the printer's control panel. Then, tap on the setting option.

Then, tap on the Restore Network Defaults/Settings.

The next step is to confirm the confirmation by tapping on Yes.

Your HP printer has now restored its default setting for networks. After that, you need to press your back button.

You must now click the Wireless icon, or Settings icon or the Network Setup menu. After that, you can proceed by pressing the Wireless Setup Wizard option.

The printer now searches and lists all available networks available to you from the selection.

To establish the connection, you need to click the WiFi network's name, and then enter the WiFi password.

If your printer can't find the WiFi network you are connected to, you should tap Enter New Network Name and enter the name of your wireless network.

NOTE:- Make sure to write the exact name of the network, that is the upper or lower case characters.

If your HP printer is connected via wireless networks the blue light that indicates wireless connectivity on the printer's control panel will turn solid.

Download HP scan and print doctor is an automated tool to address issues with setup

Then first, start by downloading your copy of the HP scanner and print doctor software.

The next step is to open the "dot executable" file in your downloads directory.

After the installation has been completed, the shortcut will be created on your desktop laptop.

From the desktop, start the HP print and scan doctor tool , and then click start.

You will be presented with an array of scanners and printers from which you can select the one you prefer.

If any issue with connectivity to wifi is detected, then the tool will advise you to take some automated actions.

You will be presented with two options: fix printing or fix scanning. It is necessary to continue by clicking fix printing.

If the issue is not resolved, try the next method.

NOTE:- Reset Network default settings for Exceptional Printers.

For HP printers without a menu for the control panel, hold and press the cancel and wireless buttons until the power and wireless light turns on.

For HP Envy 6000 Pro 6400 DeskJet Plus IA 6000 and 6400 All-in One series printers, Hold the button for wireless on the rear of the printer . This will take about five seconds or until the edge light begins flashing in purple. It is possible to try several times before the light starts flashing.

For HP Tango Printers- From the rear of the printer, press on the wireless switch for five seconds or until the light at the front of the printer flashes blue.

For HP Laser Printers [Not LaserjetHold and press this wireless switch until a light begins blinking. Your printer might restart.

2. Connect your HP Printer to WiFi Via WPS (WiFi Protected Setup) Button for Printers Without Touchscreen Control Panel

Begin by looking over your router's device to find the WPS (WiFi Secured Setup) button, but don't click it right now.

Check that the printer is near or within range from the router.

Turn on your HP printer.

Then, you need to hold and press on the button wireless for 5 minutes or until the wireless light begins blinking.

Within two minutes, you will need to hold and press the button WPS on your router for about 3-5 minutes or till the connecting process starts.

The connection between the printer and wifi has been successful in setting up the connection. The blue wireless light on the menu of the control panel will cease to blink.

NOTE:- That if your router is not compatible with the WPS button, continue by following the next tutorial.

3. HP printer "123" wireless setup for Windows 10 and Mac

The first step is to connect first to connect your Mac or Windows 10-based PC or laptop as well as an android, iOS or the iPadOS-based phone or tablet to the local WiFi network.

The next step is first download the HP Smart App for Windows 10, Mac, or Smartphone devices via 123 hp com or from the app store.

You can ensure the strength of the network signal for Windows 10 and mac 123 HP wireless printers.

Find the printer close to the Wi-Fi router as you're setting up an internet connection.

Switch on your HP Printer.

You must now launch the HP Smart App on your Windows or Mac-based computer or laptop. Click on the plus symbol (+) to connect your printer to the new wifi.

Then, select next the HP Setup option on the HP Smart App window.

Then it will ask you to input your WiFi security password i.e WEP or WPA key. Ensure that both printer and Laptop/PC/Mobile are connected with the same wifi network.

The HP smart app will begin the process of connecting your printer and the wireless network.

After that, you must comply by answering the questions on screen or the steps to complete the 123hpcom wireless set-up.

And finally, click the exit button once your HP printer is connected to WiFi.

I hope you get the right information which you want. If you didn’t get the right information here or you want to know more about Printers. Then you can easily visit our main website Theprinterfix.com.