wpc-prodcuts

[wpc-prodcuts]

In the laying process of WPC flooring, it is more important to install the keel. How to install the keel of WPC flooring?

1. Tools and material preparation: ordinary woodworking tools, electric drills, expansion screws, keels, plastic wood flooring, floor fasteners, etc. 2. According to the situation on the site, arrange the cut plastic wood keels evenly and spread them on a flat cement floor. It is recommended that the spacing of each keel be between 30-40mm. Use an electric drill to punch the plastic wood keel, the aperture should be slightly smaller than the diameter of the expansion screw. Screw the screws into the holes already made on the keel and fix them on the ground (note that all the screws must be screwed into the keel and do not protrude the keel) 3. Each piece of WPC floor has a fastener slot, align the edge of the floor with the keel, and use the WPC floor fasteners with screws to screw it into the keel. 4. When installing the second floor, snap the groove of the floor fastener into the fixed first floor fastener, and then use the fastener to fix the floor to the keel. The subsequent installation method is the same. 5. After the paving of all plastic wood floors is completed, the plastic wood floors should be edged for aesthetics. The edging can be directly fixed to the edge of the floor with screws using the plastic wood L-shaped frame.

Alibaba: shanghaiwpc.en.alibaba.com Whatsapp: +86 17601285214 Web: diyonlinemag.com Mail: sun@seventrust.com

[wpc-prodcuts]

The Great Wall panel is a kind of wood-plastic material modeling board

[wpc-prodcuts]

Raw materials for the production of wood-plastic building materials

[wpc-prodcuts]

Types of wood powder for wood-plastic products

[wpc-prodcuts]

Alibaba: shanghaiwpc.en.alibaba.com

Whatsapp: +86 17601285214

Web: diyonlinemag.com

Mail: sun@seventrust.com

[wpc-prodcuts]

WPC composite material is a typical basic material for reversible recycling

[wpc-prodcuts]

Wood-plastic composite materials use polyethylene and more than 35%-70% of wood powder mixed into new wood materials, and then extruded, molded, injection molded and other plastic processing techniques to produce sheets or profiles.

Among them, most of the wood powder is produced by wood recycling, processing and grinding, which effectively reduces the waste of wood and reduces the consumption of trees, which has a positive effect on environmental protection.

The product is also recyclable and can be used again after crushing, reducing resource consumption.

The wood-plastic composite material contains plastic, which has a good elastic modulus.

In addition, because it contains fibers and is fully mixed with plastics, it has physical and mechanical properties comparable to hardwood such as compression and bending resistance, and its durability is significantly better than that of ordinary wood materials.

The surface hardness is high, generally 2-5 times that of wood.

[wpc-prodcuts]

Wood plastic composite is panel or lumber product made from recycled plastic and small wood particles or fibers. Wood plastic composites are relatively new products as compared to the long history of natural lumber or traditional wood composites such as particleboard or fiberboard.

The greatest advantage of WPC is its environmentally friendly approach of using waste wood and recycled plastic material. Wood composite plastics have low maintenance cost as compared to that of solid wood. One of the main reasons responsible for the fast growth of WPC is its low-life cycle cost.

In general,  WPC deck has a production cost of about 15% more as compared to that of pressure-treated lumber, but requires a lower maintenance cost. The actual payback period is estimated at 3 to 5 years compared to pressure-treated decking material. Its excellent dimensional stability along with less variability also can be considered as another main advantage of WPC products.

[wpc-prodcuts]

Plastic Wood Composite Color & Textures, Choice of Color for WPC Products

[wpc-prodcuts]

Why choose wood plastic product, wood palstic composite decking

[wpc-prodcuts]

outdoor flooring deep embossed flooring, co-extruded flooring, fences

[wpc-prodcuts]

How to choose the color of wood plastic composite decking floor

[wpc-prodcuts]

how to determine the size of the product when buying wood-plastic deck

[wpc-prodcuts]

Wood Plastic use of polyethylene and more than 35%-70%of wood powder mix...

[wpc-prodcuts]

Wood Plastic Composite Materials Production Process

WPC is the use of wood processing residues, tending forest residue, waste wood, straw and other lignocellulosic materials (35% to 70%) and thermoplastic waste (mainly PE, PP, PVC) as the main raw material, by composite extrusion, press molding methods and the like is formed. WPC Hollow Decking lignocellulosic material having both high strength and high elastic, plastic and having a high toughness…

[wpc-prodcuts]

Some Problems With Outdoor Deck Installation

Some Problems With Outdoor Deck Installation

As homeowners, it is not uncommon to hire contractors for home renovation projects. Many homeowners may try to learn the facts about outdoor decking finishes from sales information and then look at competing offers to determine which is the best option. As with many things, asking a deck manufacturer many questions is the best way to help you make an informed decision. If you don’t ask the right…

[wpc-prodcuts]

Is Deck A Good Investment?

Is Deck A Good Investment?

Judging from the reaction from our customers, the deep embossed deck will recoup 70 to 90 per cent of the initial investment. Given all the economic uncertainty that surrounds us today, we all want to spend our money as wisely as possible and not devalue over time. And most of us seek to increase the value and attractiveness of our possessions, as well as the quality of our lives. So how does the…