#KESS3

[auto-tools]

New OBD Protocol Update: Alientech KESS V3 Add VAG MD1CS004

Alientech's new OBD Protocol Update is Direct OBD VR Reading & Writing for Faster, Easier Operations on the KESS V3 ECU Programmer.

The latest update enables direct VR reading and writing via OBD on supported ECUs, streamlining your workflow for greater efficiency.

Important Note:

MD1CS004 ECUs with hardware H80 can only be accessed via OBD - bench mode is not supported for these units.

Check Compatibility & Unlock OBD Protocol Capabilities:

AUDI - 2.0L TDI EU6

CUPRA - 2.0L TDI EU6

SEAT - 2.0L TDI EU6

SKODA - 2.0L TDI EU6

VOLKSWAGEN - 2.0L TDI EU6

Expanded Protocol Coverage & VR File Library

AlienTech has broadened support for more ECU versions and enhanced the VR file library to assist your operations. While many VR files are already available (ready for immediate use), we cannot guarantee coverage for every case.

The new OBD protocol for Bosch MD1CS004 enables workshops to efficiently service vehicles from 2019 to 2025, unlocking new opportunities on the latest models.

www.obd2shop.co.uk

[eobdtooluk-blog]

Alientech Kess V3 Diagnose and Reset BMW DTC via OBD Tutorial

As we know, Alientech Kess3 ECU Programmer can support car/motorcycle DTC diagnosis and reset through the EOBD connection since June 27th, 2024. Just ensure the device is under software subscription. Let’s see how to use this new DTC function on BMW with Kess3.

Quick start guide:

Connect Kess V3 ECU programmer and BMW car via OBD

Run Alientechsuite software, select the car model you desire

i.e. BMW 5-series F10 (2010) 523i 8AT Bosch ZF 8HP45

Click EXTRA and tick DTC option

Confirm to see the manual or not, if not need, just click the cross (red) to next step

Then you can see View/delete DTCs appear on the screen, click Continue

Follow the prompt to turn the ignition on, and check the connections and press OK to continue

Wait a moment, and it will diagnose the DTC quickly

Click Save DTC list to save the DTC just been diagnosed

You can open the DTC file on the desktop to check the number of DTCs found.

Back to the operation page on Kess3 software, click Erase

Follow the prompt to turn the ignition off, wait a while until the DTC reset process is complete.

Read also:

Alientech Kess V3 Added Diagnostics and DTC Reset New Features

[trafficbay]

ALIENTECH KESS3 

Al Muhandes Workshop Equipment is one of the largest and strongest supplier for Car Diagnostic tools and workshop equipment’s in GCC Countries and the entire Middle east and it’s a continuation of Zebartech ME FZE since 2013, we are specialist in trading the Car Scanners, diagnostic tools and Garag Equipment’s. We represent the best OEM in the Auto tools like but not limited to ( Autel, Launch, Xtool, Gscan, Humzour, HP tuner,……….ETC ) In the Middle East.

Explore our user-friendly website to discover an extensive selection of OBD scanners, code readers, diagnostic software, and more. We take pride in offering competitive prices without compromising on quality, giving you the best bang for your buck.

For more details, please visit our website at: https://al-muhands.com/.

[x431euinfo]

How to Fix KESS3 OBD Read SID305 "Change of status not performed"?

Question:

Alientech KESS3, trying to read a Renault Megane III 2010, Continental SID305 through OBD (only obd and boot available), but I only get the message ”Change of status not performed”. How to fix this?

Here are possible Solutions:

1)To read SID305 via OBD, try other tools like CMD and pcmflsher

2)Try BOOT mode in KESS3

3) 30 minutes on ignition and you can r/w by obd.

All old Renault have problem with time delay.

Done! Hope this helps!

[revolutionautocare]

Get More Power with Diesel Remapping

Are you looking to unlock the full potential of your diesel vehicle? Diesel remapping is an innovative solution that can significantly enhance your vehicle’s performance, fuel efficiency, and overall driving experience. In Australia, where driving conditions can be diverse and challenging, remapping can be a game-changer for both personal and professional vehicles. Revolution Autocare, located in Caloundra on the Sunshine Coast, offers expert diesel remapping services that cater to the unique needs of Australian drivers.

What is Diesel Remapping?

Diesel remapping involves altering the settings of the engine’s electronic control unit (ECU), which is essentially the vehicle’s brain. The ECU controls various engine functions, such as fuel injection, air intake, and ignition timing. By modifying these settings, remapping can optimise your engine’s performance beyond the standard manufacturer specifications. At Revolution Autocare, we offer remapping services for all diesel engines, from 4x4s and passenger vehicles to European models and even small trucks. Using the latest Alientech Kess3 software, our remapping increases power by an average of 30%, giving you more torque, better fuel efficiency, and a noticeably improved driving experience.

How Diesel Remapping Works

Assessment: The process begins with a detailed analysis of your vehicle’s current performance. Technicians use diagnostic tools to understand how your engine is currently operating.

ECU Modification: The ECU’s software is then reprogrammed to enhance engine performance. This can involve adjusting the fuel-air mix, turbo boost, and other parameters to increase power and efficiency.

Testing: After remapping, the vehicle undergoes rigorous testing to ensure that the changes have achieved the desired improvements. This often includes dyno tuning, where the vehicle is tested under simulated driving conditions.

Fine-tuning: The settings are further refined based on the test results to ensure optimal performance.

Benefits of Diesel Remapping

1. Increased Power and Torque

One of the most significant benefits of diesel remapping is the increase in power and torque. For Australian drivers, this means improved performance in various driving conditions, from city streets to rugged outback terrains.

Example: A construction contractor with a diesel-powered ute finds that after remapping, the ute gains additional horsepower and torque. This truck can easily carry heavy equipment and work on steep construction sites, making it a strong choice for tough job needs.

2. Improved Fuel Efficiency

Fuel efficiency is a major concern for many drivers, especially those covering long distances across Australia. Diesel remapping optimises the engine’s efficiency, allowing your vehicle to achieve better fuel economy.

Example: A tradie who frequently travels between job sites benefits from reduced fuel consumption, resulting in significant cost savings over time. The optimised settings allow the ute to maintain efficiency, even during stop-and-go traffic, ensuring that less money is spent at the pump.

3. Enhanced Towing Capabilities

If you use your vehicle for towing, diesel remapping can enhance your engine’s towing power, making it easier to pull heavy loads.

Example: A contractor towing a trailer loaded with building materials will find that their vehicle performs more smoothly and efficiently after remapping. The enhanced torque provides the necessary power to handle steep inclines and rough terrains without straining the engine.

4. Better Driving Experience

Overall, diesel remapping offers a more enjoyable and responsive driving experience. With increased power and torque, your vehicle will accelerate more quickly and handle more effectively.

Example: Whether you’re navigating city traffic or taking a weekend trip to the coast, a remapped engine provides a smoother and more satisfying drive. The improved throttle response ensures that the vehicle reacts promptly to driver inputs, making every drive more pleasurable.

Why Diesel Remapping is Ideal for Australian Drivers

Australia’s diverse landscapes present unique challenges for drivers, making diesel remapping particularly beneficial. From urban areas with heavy traffic to rural roads and off-road adventures, having a vehicle that can adapt to different conditions is essential.

Example: A Construction Contractor’s Ute

Consider a construction contractor based in Brisbane who uses a diesel-powered ute for daily operations. This vehicle is not just a means of transportation but also a vital tool for the business.

Performance Needs: The contractor needs a ute capable of transporting tools and materials, navigating construction sites, and handling long drives between job sites.

Challenges: The contractor often faces stop-and-go traffic in the city, rugged terrain on construction sites, and long-distance drives on highways.

How Diesel Remapping Helps:

Power and Torque: With increased horsepower and torque, the ute becomes more efficient in carrying heavy loads and accelerating on highways. This means the contractor can move swiftly between job sites, meeting tight deadlines without compromising on performance.

Fuel Efficiency: Optimised engine settings lead to better fuel economy, reducing the contractor’s operational costs. This is particularly beneficial for long-distance drives, where savings on fuel can add up significantly.

Towing Capacity: Enhanced towing capabilities mean the ute can pull a loaded trailer more effortlessly, providing greater flexibility for transporting equipment. The remapped engine ensures that the vehicle can handle extra weight without compromising safety or efficiency.

Adaptability: Whether in urban or rural environments, the remapped engine offers versatile and reliable performance, ensuring the contractor can meet job demands efficiently. The enhanced adaptability ensures that the ute can tackle any terrain, from city streets to off-road tracks.

Why Choose Revolution Autocare for Diesel Remapping?

Revolution Autocare, based in Caloundra on the Sunshine Coast, is a trusted provider of diesel remapping services. With over 14 years of experience, we understand the unique needs of Australian drivers and offer customised solutions to enhance your vehicle’s performance.

Our Expertise

Award-Winning Service: Revolution Autocare has been recognised with numerous awards, including Service Business of the Year, showcasing our unwavering commitment to delivering top-notch quality and customer satisfaction.

Highly Qualified Technicians: Our team is made up of experienced, passionate automotive technicians who are dedicated to finding the best solutions for your vehicle. Their expertise ensures your car receives the highest level of care and performance enhancements.

State-of-the-Art Technology: We utilise the latest advancements in automotive technology, including the powerful Alientech Kess3 software, allowing us to perform precise diesel remapping on a wide range of diesel engines, including 4x4s and passenger vehicles. This cutting-edge technology enables us to customise remapping specifically for your vehicle’s needs.

Convenient Mobile Diesel Remapping: We know how busy life can get, so we offer mobile diesel remapping services to bring our expertise directly to your door. With the ability to transport all the necessary equipment, we can complete the remap at your location, improving your engine’s performance by up to 30% without you ever needing to leave your home.

Customer-Centric Approach

Fixed Price Guarantee: We offer a Fixed Price Guarantee on all quoted work, ensuring transparency and peace of mind for our customers.

Warranty: Our services come with a 12-month or 20,000 km warranty on all parts and labour, providing confidence in the quality of our work.

No Surprises Guarantee: We treat our customers like family, ensuring exceptional service with no unexpected costs.

Additional Services

Revolution Autocare is more than just a diesel remapping specialist. We offer a comprehensive range of services to meet all your automotive needs. For a full list of services, please see our services page. 

Book Your Diesel Remapping and Dyno Tuning Today

Ready to unlock your diesel engine’s true potential? Revolution Autocare is here to help you achieve the performance and efficiency your vehicle deserves. Our expert technicians can help you get more power for off-road trips or save on fuel for daily commutes. Whether you’re a weekend warrior or a daily commuter, we’re here to enhance your driving experience.

Visit our website to book your remapping and dyno tuning appointment today. Experience the Revolution Autocare difference and join the ranks of satisfied customers who have discovered the power of professional engine tuning.

Diesel remapping is a powerful tool for enhancing your vehicle’s performance, especially in Australia’s diverse driving conditions. Revolution Autocare, your trusted Sunshine Coast mechanic, offers expert services to help you unlock your diesel engine’s true potential. Don’t settle for ordinary performance when you can experience extraordinary results. Expect Exceptional – because at Revolution Autocare, nothing less will do.

https://revolutionautocare.com.au/revolution-autocare-caloundra-diesel-remapping/

[cassieautoobdii]

100% Original Alientech KESS V3 KESS3 ECU and TCU Programming via OBD Boot and Bench Replace Kess V2 Ktag

#alientech #kess3 #alientechkess3 #ecuprogrammer #tcuprogramming #kess #ktag

wasap.my/+8615886576826

[auto-tools]

Alientech KESS V3 2024 Black Friday Sale: Save 50% Off!

We're excited to inform you that the Alientech KESS V3 2024 Back Friday Sale has been released: save up to 50% off! The sale is valid from November 18th to December 3rd, 2024. This is the last sale of the year, so don't miss it!

Event Details

Contact Info

Email: Sales@OBD2shop.co.uk

WhatsApp: +86 13983755934

Telephone: +86 13983755934

WeChat: +86 13983755934

Skype: OBD2tool.co.uk

www.obd2shop.co.uk

[auto-tools]

The new DynoDrive feature for KESS3 is now available

Today I have great news for you! The wait is over and the new DynoDrive feature for KESS3 is now available for sale!

As anticipated in May 2024, DynoDrive is the new paid feature available for KESS3 that can measure car performance before and after ECU modification. All users with KESS3 can activate the DynoDrive feature and it does NOT require an active subscription. The main innovation is that DynoDrive can also be activated on KESS3 Hardware WITHOUT any active protocol package. Customers can purchase KESS3 with DynoDrive activation to perform performance testing and use other ECU programming equipment to program the control unit.

You can click the following links to purchase: Alientech KESS3MKWO KESS3 Master - DynoDrive Activator KESS3MKWO KESS3 Slave-DynoDrive Activation KESS3MKWO KESS3 Hardware - DynoDrive Activation

For more information, please contact Email: sales@obd2shop.co.uk TEL&WhatsApp: +86 13983755934 www.obd2shop.co.uk

[auto-tools]

Alientech KESS3 DTC Feature Free Upgrade

Good news! A new feature upgrade: The DTC Feature is now available with an active KESS3 subscription.

The new "DTC" feature of KESS3 allows you to view and reset DTCs in a car or motorcycle. Through the EOBD connection of KESS3, Alientech Suite retrieves the list of (SAE – Society Automotive Engineers) error codes recorded during vehicle operation, helping mechanics and mechatronics easily identify potential faults and damages.

WHAT ARE THE KEY POINTS OF THE NEW DTC FEATURE? 1. DETECTION AND INTERPRETATION OF ERROR CODES 2. RESETTING ERROR CODES 3. PRE-TUNING AND POST-TUNING DIAGNOSTICS 4. SPECIAL FUNCTIONS

1. Detection and Interpretation of DTCs When connected to the control unit, KESS3 obtains the stored error codes. Via the KESS3's OBD connection, Alientech Suite reports the list of error codes (SAE - Society of Automotive Engineers) recorded during vehicle operation, helping mechanics and mechatronics engineers to identify any faults easily.

2. Resetting DTCs After identifying the codes, it is possible to reset them, thereby eliminating warning lights and anomalies on the dashboard. Clearing the fault is essential for ensuring the proper functioning of the vehicle. After mechanical repairs, this KESS3 feature allows for a DTC reset, providing comprehensive service.

3. Pre-Tuning and Post-Tuning Diagnostics Assessment of risks and feasibility of modifications. This feature allows you to preview and interpret error codes to prevent faults or malfunctions in the vehicle. Additionally, the same process can be performed after modifying the engine parameters with KESS3. In this case, the DTC feature helps identify any error codes that could appear after the tuning phase.

4. Special Functions Special functions are dedicated to specific vehicle models. Some special functions such as steering alignment, differential lock/unlock, or resizing of wheel dimensions are available for some vehicle models. These specific functions are included in the "DTC" feature package and expand the range of modification and customization interventions.

For more information about KESS 3 please visit www.obd2shop.co.uk

[eobdtooluk-blog]

Alientech KESS3 Update: Added Keihin A6244103100 RH850 R&W via OBD

Alientech KESS3 ECU Programmer released a new upgrade on June 5th, 2024.

Exclusively on KESS3 and Powergate: work via OBD on the Keihin A6244103100 RH850 ECU of the new KTM Super Duke R 1390!

Update details:

Work quickly and efficiently on the brand new ECU of the KTM Super Duke R 1390 (MY2024) directly from the OBD diagnostic port. With this new protocol, you can increase the performance of this incredible bike and satisfy even the most demanding customers with a specialized and reliable service.

New supported ECU:

Keihin A6244103100 RH850

Unlock the full potential of the twin-cylinder engine equipped on the maxi naked bike, the star of this new development. With KESS V3, you can ensure a quick and professional intervention, risk-free, and significantly enhance performance.

Keihin A6244103100 RH850

KESS3 BIKE OBD

KTM RD, WR in OBDDuke1390 Super Duke R EvoPetrol140 kWDuke1390 Super Duke RPetrol140 kW

Activate the KESS V3 BIKE – OBD protocols and discover all the opportunities that motorcycle reprogramming can offer you.

[eobdtooluk-blog]

2024 KESS3 ECU Programmer FAQ & Customer Feedback

KESS3 Frequently Asked Questions:

1. How can I interface and program the control units?

With KESS3 you can program the engine control units (ECU) or transmission control unit (TCU) in three different ways:

OBD – With the OBD mode, you can easily access all the ECU data through the diagnostic socket.

BENCH – With the Bench mode you can access the ECU data directly from the connector

BOOT – With Boot mode, with the engine control unit opened, you could connect directly to all the memories of ECU/TCU.

2. What is the difference between Master and Slave?

As a Master user, you can read the files in clear. This allows you to operate independently in order to remap and reprogram the ECU with modified files. As a slave user, only your master will be able to decrypt your files. (Recommended choice for taking the first steps in chiptuning, supported by your Master)

3. Can I update slave version to Master version?

Yes, you need pay the price difference to update it.

4. I have kess3 slave, if i buy kess 3 master from you, can you bind my slave one to the master? Yes, we can do this 5. Can i activate master license and slave license to the same device? No, you cannot.

6. Can I unbind license if i purchase kess3 from othe dealer, then purchase license from you? No possible to unbind device no matter where you buy the machine. You can only buy license and subscription from your own supplier

7. Can i use the tool if subscription expires? Yes, afte the subscription runs out, you still can use it and will have access to all the protocols you had until its expiration date,but if you want to use the latest update softwrae, you need pay new subscription. And after subscription expires, the VR files not possible. Moreover, won't have access to: - technical assistance - VR function - Cloning - All the online services such as ORI file download.

8. If my subscription expires on 1 Nov, 23, I don't renew it until 1 May 24, when does the new subscription expire?  From day it ran out.

9. If when my master kess3 subscription is due in Oct, 11th, 2023 and l decide not to carry on paying. Can i have all the protocol updates if I pay for the subscription 6 month later? Yes, you will have all protocols from expiry to renewal period.

10. How to check device serial number? SN is on the back of the kess3 unit, or check in AlienSuite software.

11. What types of vehicles are supported?

Alientech supports hundreds of thousands of vehicles. Not only engine control units, but also transmission control units equipped on cars, motorcycles, tractors, trucks and boats. To know all the vehicles that Alientech supports, you can easily consult our vehicle list.

12. I own KESSv2 / K-TAG. How can I get KESS3?

For all our customers who own a KESSv2 or K-TAG product we have created an trade-in program for your instruments. By choosing to replace KESSv2 and / or K-TAG, you will get a discount on the value of your new KESS3 configuration. Discover the discount reserved for you.

13.I am a KESSv2 / K-TAG customer, but the subscription has expired. Can I get the new tool?

Yes, even for you, during the trade-in phase there is an enhancement of the instrument regardless of the validity of your instrument.

14. Are my old KESSv2 / K-TAG accessories compatible with KESS3?

YES. All KESSV2 or K-TAG accessories are and will be compatible with KESS3.

15. I own KESSv2 / K-TAG. Is there an operating deadline?

The K-suite software and the all related services and infrastructures will continue to be updated and totally functional. After your subscription will be expired, it will no longer be possible to download new protocols

16. Technical specification KESS3

Interface

DB25 connector

Tyco 12 connector

USB 2.0 type B connector

Compatible operating systems

32-bit or 64-bit editions of Windows 11 and Windows 10

RAM: 1 gigabyte (GB) for 32-bit OS or 2 GB for 64-bit OS

Processor: 1 gigahertz (GHz) or faster

Hard disk space: 200 MB

1 USB port

Microsoft® Edge®

Active Internet connection

Optional System Requirements

Bluetooth V4.2 BR/EDR and Bluetooth LE

Wi-Fi 802.11b/g/n

Alientech Srl does not guarantee the correct functioning of the software on operating systems that are not indicated in the table above.

Environmental conditions

Temperature range of us: -10°C/+50°C – 14°F/122°F

Storage temperature rang:  -20°C/+70°C – -4°F/158°F

Maximum usage humidit: 60%

Operating altitude:  max. 5000 m/16400 ft

Degree of waterproofin: IP X0

ALIENTECH KESS V3 Feedback: 

so far tested old edc15p obd

fiat 9gf_t7 bench

edc17c64 boot and bench

insignia edc17c19 bench

old jag delhi mpc555 bdm fail but ktag worked

mazda r2ak under r2ab obd ok

peugeot dmc3.5 obd ok

psa edc17c10 obd , write 30 seconds ish ok

renault edc17c42 obd ok

ford dcm6.1 obd ok

JAGUAR MEDC17.9 BENCH OK

AUDI EDC17C46 BENCH OK

AUDI EDC16CP34 BENCH OK

RENAULT MASTER SID310 BOOT OK

BMW G11 MD1 BENCH OK

NEW 2021 MIN F54 LCI MG1 NOT OK (BUT FLEX TO)

CITROEN EDC17C60 BENCH OK

FORD sid209 obd locked ecu, no recovery

(Use TGflash for FORD SID209 (over OBD) with full recovery — Tactrix OpenPort 2 will work fine)

CNH edc16 and EDC7, not wok recovery original and recorded with kess v2 work

VAG med17.5.5 not read boot, ktag work read

BMW Mevd17.1.2 obd not work

marelli 6jf in bench does not work

marelli 6f3 in bench does not work does not connect and in bdm does not calculate the chk

mjd603 works with bdm connected for cloning

crd1.1 on bench but using obd worked

FIAT MJ8F3 BENCH OK

AUDI EDC17CP14 BENCH OK

OPEL EDC16C9 BENCH OK

FORD SID208 BENCH OK

PSA SID208 BENCH OK

FORD MED17.2.2 BENCH OK

OPEL EDC16C39 BENCH OK

FIAT 9DF (AFTER 2021) BENCH NOT OK BUT FLEX TO FAIL

I´ve done many SID 206 Ford all ok with Kess 3

Sid209 ford no read boot mode, read password failed for OBD…With sid 208 ford bench I had no problems but sid 208 PSA I tried endless connections until I was able to write.

To be continued…

Learn more:

[eobdtooluk-blog]

ALIENTECH KESS V3 ECU Programmer FAQs

KESS 3 is the all in one ECU tuning tool from Alientech, working via OBD, Bench and Boot mode. KESS V3 is the powerful tool that allows the read and write of the ECU found in Automobile, Motorcycle, Trucks, Agricultural Vehicles as well as Marine applications by simply connecting the supplied interface cable to the diagnostic port of the vehicle.

Q: What is the difference betwwen Master and Slave?

A: As a Master user, you can read the files in clear. This allows you to operate independently in order to remap and reprogram the ECU with modified files. As a slave user, only your master will be able to decrypt your files. (Recommended choice for taking the first steps in chiptuning, supported by your Master)

Q: Can I update slave version to Master version? A: Yes, you need pay the price difference to update it. Q: Can I downgrade master version to salve version? A: Yes, but for this, will not refund price difference to you Q: I have kess3 slave, if i buy kess 3 master from you, can you bind my slave one to the master? A: Yes, we can do this Q: Can i activate master license and slave license to the same device? A: No, you cannot. Q: Can I unbind license if i purchase kess3 from othe dealer, then purchase license from you? A: No possible to unbind device no matter where you buy the machine. You can only buy license and subscription from your own supplier Q: Can i use the tool if subscription expires? A: Yes, afte the subscription runs out, you still can use it and will have access to all the protocols you had until its expiration date,but if you want to use the latest update softwrae, you need pay new subscription. And after subscription expires, the VR files not possible. Moreover, won't have access to: - technical assistance - VR function - Cloning - All the online services such as ORI file download. Q: If my subscription expires on 1 Nov, 23, I don't renew it until 1 May 24, when does the new subscription expire?  A:  From day it ran out. Q: If when my master kess3 subscription is due in Oct, 11th, 2023 and l decide not to carry on paying. Can i have all the protocol updates if I pay for the subscription 6 month later? A: Yes, you will have all protocols from expiry to renewal period. Q: How to check device serial number? A: SN is on the back of the kess3 unit, or check in AlienSuite software.  Q: What types of vehicles are supported? A Alientech supports hundreds of thousands of vehicles. Not only engine control units, but also transmission control units equipped on cars, motorcycles, tractors, trucks and boats. To know all the vehicles that Alientech supports, you can easily consult our vehicle list. 

Learn more: https://www.eobdtool.co.uk/wholesale/kess3-ecu-tcu-programmer.html

[eobdtooluk-blog]

KESS V3 Update for Bosch EDC16C8/ MD1CC898/ DCU15C167 HD Trucks Reading and Writing by Bench/Boot

Alientech Kess3 newest update on Feb.21th, 2024:

Reprogram on bench the new heavy-duty vehicles supported, branded Doosan, Shacman (Continental SID605), Mahindra (Bosch MD1CC898), Volkswagen (Bosch EDC16C8), and Yutong (Bosch DCU15C167).

Update details:

Increase your workshop’s earning potential in the heavy-duty vehicle field with a comprehensive cloning service on Bosch DCU15C167 installed on Yutong trucks, as well as Continental SID605 ECUs managing Weichai engines of Doosan and Shacman vehicles. Also, work in ‘BENCH mode’ on Bosch EDC16C8 ECUs equipped on Volkswagen Trucks, and Bosch MD1CC898 fitted on the latest Mahindra trucks.

New supported ECUs:

Bosch DCU15C167

Bosch EDC16C8

Continental SID605

Bosch MD1CC898

Take advantage of the opportunity to work on vehicles from different parts of the world to broaden your experience and stand out in the market, offering quality services not only for heavy-duty vehicles but for a wide range of conveyances.

Bosch DCU15C167

KESS3 TRUCK BOOT MODE

YUTONG

RD, WR and Clone in Boot ModeCoachesZK6107HA 8.0L I4Diesel184 kW

Bosch EDC16C8

KESS V3 TRUCK BENCH MODE

VOLKSWAGEN

RD, WR in Bench Mode

Continental SID605

KESS3 TRUCK BOOT MODE

DOOSAN

RD, WR and Clone in Boot Mode

KESS3 TRUCK BOOT MODE

SHACMAN

RD, WR and Clone in Boot Mode

Bosch MD1CC898

KESS3 TRUCK BENCH MODE

MAHINDRA

RD, WR in Bench Mode

Choose Alientech KESS V3 to increase performance, repair, and reduce fuel consumption on the new supported vehicles with targeted interventions tailored to your customer’s needs.

[eobdtooluk-blog]

ALIENTECH Kess V3 vs Kess V2 vs Ktag

New KESS V3 is the new original Alientech ECU and TCU Programmer via OBD, Bench and Boot Mode all in a single tool. It combines Kess V2 and ktag into 1 tool, and will be a powerful tool that allows the READING and WRITING of the ECU found in Automobile, Motorcycle, Trucks, Agricultural Vehicles as well as Marine applications by simply connecting the supplied interface cable to the diagnostic port of the vehicle.

What is the difference between Kess V3, Kess V2 and Ktag?

1.Communication Method:

Alientech Kess V3 supports OBD, Boot, and BENCH connection

Kess V2 only supports OBD tuning, and K-TAG supports Bench/Boot tuning.

2.Version Update

KESS3 has two versions: Master and Slave. It can be updated from Slave version to Master version, but others cannot.

3.Separate Car & Bike Protocols

Only Kess V3 supports.

4.Others

Alientech Kess3 uses Alientech Suite while others use K-Suite.

Kess V3 supports upgraded cable set while others use standard cable set.

Kess3 can calculate checksum super fast while others support standard speed.

Kess 3 supports 10 x faster processing

In conclusion:

Alientech Kess3 Pros:

Powerful microprocessor

More potent than the earlier generation

Reliable execution of commands

Good technical support

Faster and more efficient performance

Automatic and instant recognition of the right communication line

New kess3 combines kess and ktag into 1 tool, you buy the protocols then so you can buy just obd protocols and use like kess was or you can also buy all bench protocols like ktag.

Kess3 Cons:

More expensive

Requires stable internet connectivity

Alientech KESS V3 Package List:

1x pc KESS3 main unit

1x pc USB cable

1x pc new generation OBD cable

1x pc 1400SWALIM power supply

1x pc 144300TALI Cable

1x pc 144300KBNC Cable

1x pc 144300KTER Pack

1x pc 144300T104 Rainbow Cable IDC 26-10

1x pc 144300T105 Rainbow Cable IDC 26-16

1x pc 144300T106 Rainbow Cable IDC 26-26

ALIENTECH KESS V3 Kess3 ECU and TCU Programmer:

[auto-tools]

Alientech KESS V3 2025 Sale: Save 50% + FREE Protocols Until 16th!

Hurry! Only 6 Days Left Until June 16th! Don’t miss this exclusive Alientech KESS V3 2025 promotion - perfect for new users! Enjoy massive discounts on powerful ECU tuning tools designed for cars, trucks, tractors, and buses for a limited time. Whether you’re a professional tuner or a DIY enthusiast, this is your chance to upgrade at unbeatable prices.

Hot Deals You Can't Ignore

Why Choose Alientech KESS V3? ✅ High-Performance Tuning - Optimize engine performance for a wide range of vehicles. ✅ User-Friendly - Perfect for both professionals and beginners. ✅ Exclusive Free Bonuses - Get BENCH/BOOT protocols at no extra cost! ✅ Limited-Time Savings - Prices this low won’t last!

Act Fast - Promotion Ends Soon! This offer expires on June 16th, 2025. Don’t wait - secure your Alientech KESS V3 today and start tuning with premium features at a fraction of the cost!

Shop Now: www.obd2shop.co.uk