#ic socket adapter

[jhn2naekkr]

https://www.futureelectronics.com/p/interconnect--pin-and-socket-connectors--header-plug-board-mount/bm04b-srss-tbt-d-lf-sn-p-jst-3033965

Socket Crimp Terminal, Receptacle Housings, Crimp Split Pin, ic socket types

BM04B Series 1 mm Pitch 4 Position SMT Single Row Top Entry Shrouded Header

[ab2mirezz]

https://www.futureelectronics.com/p/interconnect--pin-and-socket-connectors--header-plug-board-mount/5787531-1-te-connectivity-5053790

Socket Connector, Ethernet jacks, IC socket adapters, wire connector pins

6 Position 2.5 mm Pitch Vertical PCB Through Hole Header

[jne2llee]

https://www.futureelectronics.com/p/interconnect--connector-tools-contacts-accessories/dt04-3p-te-connectivity-7076061

Electrical connector Accessories, Cable assembly, crimping tool, USB connectors

DT Series Contact Size 16 3 Way Gray Receptacle Housing

[atino2fild]

https://www.futureelectronics.com/p/interconnect--pin-and-socket-connectors--crimp-terminals/62253-2-te-connectivity-6273528

Electrical plug connector, DIP ic socket, Socket Crimp Terminal

6.35 mm Quick Connect Female and Male 10-14 AWG Crimp Connector Non-Insulated

[hopesallwegotleft]

Snowman

For 12 Days of Jalim. Prompt #1: Snowman Words: 279

Going through Jason's different life stages. As a kid growing up, as a young adult getting addicted, as an adult in the military (around the checkpoint incident), and finally when meeting Salim.

-----

There's ice in his body. Always has been. Smoky-blue blood vessels streaking beneath hoarfrost skin growing up. Everyone can see it. Coming home to the arctic, his breath condensing in the cold. Mom working herself to the bone, still the heating goes out. Dad out of the picture, nowhere to be seen—wouldn't even recognize him if he was. A common tale he's too young to know. A bedtime story he falls asleep to every night. He shivers beneath the covers, frigid air freezing his cheeks.

There's ice in his veins. But not enough. His heartbeat slows, his body grows corpse cold. He is older now. Short on money, short on work, short on future. Too aware of the frostbite setting in. They say too much cold can feel like a burn. So he adapts, lapsing into rigor mortis; snow-white powder sticks to the tips of his fingers, the tip of his nose.

There's ice in his skull. There should be. When he remembers it being different, he shouts. Summons an avalanche to bury him under layers of snow. To suffocate his voice. To shelter him too deep to dig out, too far down to discover, too distant to hear his teeth chattering. He harbors hypothermia, rime replacing the marrow of his bones. Ice fills his eye sockets, so he can't see anything wrong. It numbs him. He's not cold. He's not. He says he's fine; this conversation is over.

There's ice inside him. He wants it gone. It's thawing, disappearing in drops down his spine under stubborn eyes. They're unwavering, the kindest he has ever seen—warm brown that doesn't look away. A tender look, searching. What will they find?

[sngl-led-auto-lights]

What are the best LED lights for cars?

Choosing the "best" LED lights for your vehicle depends largely on your specific goals, vehicle type, and budget. There is no single "best" choice, as the ideal choice varies for headlights, fog lights, interior lights, and more. Here are the best recommendations based on common applications and key factors:

🛑 Key Considerations: First Legality and Safety:

Headlights and fog lights: Your most important consideration. Not all LED bulbs are legal or safe for use in halogen reflector/projector housings. Many LED bulbs create excessive glare, diffuse light, and obscure vision for oncoming vehicles.

Look for SAE/DOT or ECE certified bulbs designed for your housing type (reflector or projector). Reputable brands design their bulbs to mimic the position and beam pattern of a halogen filament. Look for LED bulbs with adjustable light patterns (like SNGL) to avoid glare and dark areas.

WARNING: Avoid cheap, uncertified "plug and play" LED bulbs that claim to be universal. They are often illegal and unsafe.

Quality & Reliability: Prefer brands known for good thermal management (large heat sink, efficient fan or copper base plate, copper tubing), durable components and stable output. Cheap LEDs break easily and can damage wiring.

Compatibility: Must match your bulb size model (H11, 9005, etc.), housing type (reflector/projector - ask your supplier!), and usually CANbus compatible to prevent error messages on modern cars.

🚨 Best LED Headlight Bulbs (Low/High Beam) Prioritize: Legal Beam Pattern Lifespan Brightness Heat Management

Most Recommended Brands/Options:

Brand and Model Key Features Best Use Reasons for Recommendation

🔆 Philips Ultinon Pro9000 Good optics, beam focus, strong heat management Performance- and safety-conscious users are willing to invest OEM-like beam pattern benchmark, ECE certification, excellent manufacturing quality 🔆 SNGL Competitive intelligent IC led driver built-in a all-new CANBUS system, the compatibility performance has been greatly improved, top-notch thermal management (copper substrate, copper tube, fan, heat sink), more reasonable price, adjustable light pattern, no glare and dark areas, DOT compliant. 🔆 Beamtech Pro Projector Housing Very popular, solid performer Budget-focused projector headlights Great value, generally good in projectors, good heat dissipation 🔆 Hikari Ultra / F3 Series High brightness, generally good beam focus Users who prioritize maximum output Balanced output, generally good customer support Requires careful aiming 🔆 Sealight Scoparc Series Balanced output and pattern control A solid low-mid-range option High efficiency, high reliability with the right housing, growing in popularity

🌫 Best LED Fog Light Bulbs Priorities: Right color temperature (3000K-4300K ​​yellow/white light) Good cutoff frequency Waterproof/dustproof

Most Recommended:

Diode Dynamics SS3 Sport/Pro: (Complete Replacement Housing) Industry-leading performance and durability, SAE-compliant options.

Morimoto XB LED: (Bulb or Housing) Excellent output and cutoff frequency.

SNGL Series (3000K Yellow): Affordable, efficient, and a popular choice for yellow light bulbs.

💡 Best Interior/License Plate/Turn Light LEDs Priorities: No trouble with CANbus interface Desired color (cool white ~6000K common)

⚠️ Key things to avoid “Generic” bulbs: LED type must match your specific bulb socket/housing.

Cheap LEDs (10-20 pairs): Definitely poor performance, glare, short life, fire risk.

Too high color temperature (>7000K): Blue/violet light scatters badly in rainy and foggy weather. Headlights should choose a color temperature of 5000K-6500K.

Projection type: Projection lenses are more adaptable to LED lenses than reflector lenses.

Skip aiming: Headlight aiming and height must be adjusted after installing any new bulb.

✅ Conclusion For safe, legal headlight beam performance: Philips Ultinon Pro9000 or SNGL are top choices. Be prepared to pay a premium ($100-250 per pair).

For great value projector headlights: Beamtech Pro (check specific fit/beam reviews for your model).

Fog lights: Diode Dynamics SS3 (if budget allows) or SNGL (3000K).

Interior: LASFIT or Sylvania offer reliable and affordable options.

Before buying, always verify accessory compatibility and recommended headlight type on the manufacturer's website! Check forums/groups related to your model for proven experiences. Proper installation and aiming are critical for safety and performance. 💡🔧

[autoledledming]

Description

LED CM511338 H7  Fog Lights

1. Increase Night Visibility： High-quality LED CM511338 H7 bulbs, 48W each, color temperature 6000K white light and 3000K warm white light, equipped with 12 advanced LED chips to achieve 360° lighting. The precision optical design projects the light farther to form a focused beam without black spots or shadows, resulting in a wider and clearer field of view, ensuring safe and comfortable driving.

2. Safe Beam Pattern： Applied the ultra-thin LED chip interval provides a wider angle and farther range of light on the road. No blinding or dazzling oncoming drivers, ensuring a safe driving experience.

3. No Additional Adapter Required： NO POLARITY, 1:1 mini design same as halogen bulbs. No worries about the narrow space of the housing and no need for extra adapter—real plug and play, directly fits into your socket.

4. Longer Life： Lifespan up to 50,000 hours: Made of aviation aluminum with excellent heat dissipation performance, double-sided high-purity copper circuit board, and a radiator design with two small heat pipes to quickly increase the heat dissipation rate. The turbo cooling fan ensures a lifespan of up to 50,000 hours. , and can ensure stable luminous flux and reduce the need for frequent replacement of light bulbs.

5. Easy Installation： 

Installs into your enclosure and factory socket without any modifications, plug and play. LED H7 CM5113 Fog Light headlight matches 99% of vehicle models. If you don't know what type of bulb fits your car, check your owner's manual or the part number on the original bulb to confirm the bulb type, or search "Car Bulb Finder" to confirm the model number.

LED CM511338 H7  Fog Lights

*.Power supply: 12 or 24VDC cannot be shared *.SMD3570： chip high-power 48W *.12 flip-chip ：packages, stable lumen output using constant current IC. 

[ovcvlt]

"Open your fucking eyes. We'll be the ones that set civilization back, open your eyes; find out that you're what you see. This won't be the last of us."

Lord of Flies, the Omnitrix's DNA hybridization of a Homo-Sapien & a Microchip from the Hive.

Not much is known about this particular alien. The most that it's known is that it's the Omnitrix's only known hybrid; an alien form that was used to combat the Swarm. It's appearance rather resembles exactly what you'd expect from a bizarre infusion of human DNA + the nanochips from the Swarm; a humanoid body, albeit looking more like a skinned human with armor, which appears to be infusing into the host. His skull is fully exposed from the front, with plates of metal shaped like a helmet covering the back of it, and a metal hinge for the jaw.

What becomes also apparent at first sight is that several parts of his body are being pierced by wires that go in and out of his body. There is a human eye stuck at the top of his head, wired down by some metal wires, going into the helmet, and into the skull through the top and through the sockets. HIs eye sockets are also hollow. From his back, wings that resemble the same microchips from the Hive also sprout out as wings, allowing him to fly. His hands are exposed with muscle and bone, which can also shift and transform into different types of weapons, like hand blades. Across his body, there are glowing veins, which seem to be powered by the microchips, but often times will change colour when exceeding the power limit and starting to use the Omnitrix as a source of energy.

Abilities:

Bio-Electricity Generation

Energy Ball Generation

Optic Laser

Small Space Maneuvering

Size Alteration

Flight

Enhanced Reflexes

Decoy Queen Control Immunity

Electricity Resistance

Adaptability

Energy Tentacles

Limb Morphing

L̴͍̟̯͉͔̜͖͙̤̓͗͛̂͊̌̽̃ͅĮ̸̛̛̜̖̞̩̩̳̟̓͒̑̊͐̈́͌̽͂̉̒͘͝͝M̶̛̟̹̟͖̗̩͉̦̥̘̟̟̻̈͌̓̀̍͑̐̓̌̏͋͜͝Ǐ̸̢̛̱̝̮̂̋̈̀͆̏̉͝T̸̫͉͕̹̲͇̬̣̠͈̀̌͘͜͝E̵̛͇̥͎͚͂̄̾̉̊̎̇̉͛̀͐̒̒̈́͝͝D̷̨̛̝̗̬̰͚͔͙̺̐̑̔̊͆̋̈́͒͑̋͝ ̵̢͎̭͉̣̥̖̟̓̓̓̒̓̋̒̽͌́͑̈́̅̿͒̎͂ͅC̴̡̧̠̠̪͇͓̟̖͙̲̈̅̐̆̓͐̍͗͆̅͘͘͠O̶͙̰̅͊̅̈́͛́̚̕N̷̲͕̤̫̩̫̼̺̮̏͑͗̾͌̏̄͂͂̾̚͜͜Ṱ̵̱͙̅̍͌̃R̸͎͉̦̞̭͉̦͙͉͇̼͍̻̥̞͎̿̌̈͊̔̓̀̕ͅO̴̜͓͋͘Ļ̴̘͊̋̃ ̴̛͕̫͎̽̃͂͠Ò̷̯͍͍̩̉̅̉̔̆̒́́̌̈̀͘F̴̗͎̲͔̺͙̮́͊̓̀̎̌͑̕ ̷̡̩͖̫̘͎̮̥͉͈̪͕̾̈́̈́̒͌̓̃̍͋͊͊͠T̵̨̖͇͙̅̑̊H̴̨̡̨̱̗͕͉̫̙͖͎͈̙̰̠̙̋͆̇̽̎̃̇͊͌̾̔Ę̴̱̥͊̓͑̄̒̎͘̚͝ ̷̙̥̜̀̇̀͌͘͠S̸̡̥̼̺̮͚͖͈̦̖̱̍͋̌͝Ẅ̷̮̫́͌̄͂͂͗̋̆͐̌̅̇̊̽͊͘͝A̴̢̲͓̱̬̭͉̭̣̭͉͎̾̈̽͝͝R̴̨̛͖͕̪̰̻̺̮̞̤͕̝̗̱͛̈́͗̿̈́̋̌͊͝M̷̟̻̬̳͓̹͔̳̤̎̊͊͛̑̇͂̈́̊̀̉

Weaknesses:

Small Size (Vulnerable to bigger enemies)

Immobilised By Ice

Strong Wind Vulnerability

Blasted back by Electricity

Can lead the Omnitrix to run out of energy faster (if using it as a power source)

Immense Pain (due to being 1/2 human, turning his hands into weapons tends to hurt a lot, especially the first few times. This no longer becomes that much of a bothersome problem the more practice the user has with the form)

Ą̸͍̳̩̗̬̤̎̇͆̾́͑̚͜Ņ̷̮̼͎̣̜͍͈͇̪̻͔͉̀̈́̍̀̌͊̏̂̉̓̀̀̿͜͠S̴̛̯͓͑̿̍́̂͘Ẉ̴͍͉̬̥͕̄E̶͚̘̹̐͝R̸̢̭͓͎̦̜͖̮̣͈͙̭̝̣̄̇̆ ̶̛̘͉͎̣̤͙͔̺͓̹̯͌̈́̂̎̃̔̈́͒̓͋͗̊̀̆Ţ̴͉̤͋̐̆͘̚͝H̴̲̼͍̙͔̯̱͚͍̞̀̐̀̎̾̀͒̆̚͜Ę̶̪̝̦̯͇͉̓͐ͅ ̸̧͎̪̮͍̯̯͎̫̫̬̮͓̌͐̽͌́̒͋̊̈́̕͝S̴̛̭͓̒̓̇́̾̈́̔́̂Ẇ̵̨̥̻̤̯͎̓̍̅́͊̃̿̊̈́̐̀͠Ḁ̶̥̚Ŗ̵̛̛̲͋̄̍̀͐̇̓͋̏͘͠͝M̶̟̭̅̿.̶̪̪̹̤̩̠͑̀̓̈́͊̎̑̽̉͛ ̵̲̳̕T̴̨̛̜̩̙͔̖͉̤̪̼̻͚̭͌̆̃͑̂̌H̸̡̪̰̪͕̠̥͍̟̞̼̽͊͠I̷̭͎̗̫̠̦̤̥̰͆̇̃̽̚͘͜ͅS̶̱̺̝͈̪̱̞̝̹͎͙͔̲͖̉̎̋̑̆̑̄̀̚ ̸̦̜̫̞̦̪̙͕̩̗̖̖͖̟̊̀̆̈̐Ǐ̸̥̤̯̥͉͈̣́͗͗̈́̅̆̓̐͝S̷̜̣̯͙͚̬̝̯̳̟͚̗̑̀̍̃̑̅́͑̀̆̿͜ ̷̛͕̥̣̻̱̱̳̙̦̳̯̥̣̓̌̎̈́̃̈́̆̍̽̕͘͝ͅP̵̡͈͎̞͍̟̍͋͌̚͘̚͠R̷̡̛͖̳͓͓̫̺̟̃̕O̶̦̠͎̠̖͚̜̅̂̓̆̐̒͆̑̿P̷͕̳̱̖̦͙̿̋͑̓̾̽̒Ḥ̷͎̮̊È̴̡̩͉̱̹̙̓̈́̔C̴̦͎̮̥̈́͛͌Ỳ̷̧̢̢̟͇̖̟̳͈̱͎̠͙̄ ̸̱̲̹̌̎͂̏͂̃̅̎̄͒̄̒̕̕P̶͖̳͚̟̮̙̀̽̔͊̌̃̒̐̀͊̀͝ͅL̴̰͈̎̋̊̾̓́̀̓͋̀̀A̴̭͗̔͑Ỳ̵̛̙͕̅̈́̈̔̂͆̕͠E̵̞̝̠̣͑̎̊̄̃̽̈̒D̴̨̼͉̣̣̯̹͖̜̰̳̰͓̃̾̾̔̄̾͗̆̚ͅ ̴̡̛̖̙̭͓̖̠͖̯̮̺̩͇̏̈́̉͌͋͒͌̊̓͠͝͝Ǫ̴̲̱̠͚̠̻͚̏̇Ṷ̶̢͖͉̞̪̪͔̞͈̻̣̇̀̈́̇T̶̛͙̺̭̰̤̮̺̳̹̺̻̙̲͂̾̓̋́̋̈́̌͆̅͝ͅͅ.̷̠̯̤͈̫̦̹͙̱̻̩͎̋̉͋̍̀̿̓̉̚

[atplblog]

Price: [price_with_discount] (as of [price_update_date] - Details) [ad_1] From the brand Need Help All product are eligible for 30-DAY RETURNS, make this a ZERO- RISK purchase Dual Usb Travel Adapter Type C USB C to USB Adapter Universal Travel Adapter 🌐 CHARGE 3 DEVICES AT ONCE - The universal travel adapter with type c equipped with 1 universal input, 1 USB and 1 USB-C - Perfect essentials for traveling - perfect for charging fast use with cell phones iPhones max tablets iPads laptops & other devices anywhere in the world 🌐 【Worldwide Travel Plug Adapter】-- Slim universal travel adapter, the classic slider design pushes out EU, UK, and US plugs, and you can rotate the pins for sockets in Australia or China. Covers about 224+ Countries, such as US, Italy, France, London, Germany, Austria, Switzerland, Europe, Ireland, Denmark, etc. Slim but powerful, perfect for international travel. It does NOT work in India(Type D plug) and South Africa(Type M plug). 🌐 【 USB-C Smart Charging】 - Our universal travel adapter features Type-C+ USB-A+ Universal AC socket, allowing you to charge your 3 devices simultaneously with High-speed. 2 USB ports with built in IC can detect your multiple devices and deliver fastest possible charging speed. The USB-C port can charge up to 2.4A 🌐 【Travel Adapter Built-in USB-A/USB-C Ports】-- Our international power adapter has two USB ports. 1 x USB-A port, 1 x USB-C port, and 5V 2.4A per output, plus AC sockets. Allowing to charge up to 3 devices simultaneously. This international plug adapter can fully meet your basic usb charging needs. 🌐 【Power Range】- Rating: 100-250V~6A Max. Max: 250V~6A/1500W 100V~6A/600W. Warm Tips: Appliances (AC Devices) with a power exceeding the adapter's maximum power are NOT allowed to use this travel plug adapter. 🌐 【Safety Certified】-- This international travel adapter is built in Max 6A Fuse to protect your gadgets from power surges. Different from other same products, it also has safety shutters and a plug lock system, certified by RoHS, CE, and FCC, ensuring its safety and reliability to the greatest extent. 🌐 【Slim Fit Design and Lightweight Universal Adapter】-- Smaller size: 2.

95inch x 1.92inch x 1.37inch, weighs only 3.9oz. Our universal power adapter is about half smaller as other adaptpers with the similar function on the market. The slim fit of the charger block and its lightweight make it a good travel tool for traveling outside of the country. 🌐 ⛔【NOT a Voltage Converter】⛔-- Please note this all in one travel adaptor 🚫does NOT 🚫convert ⚡⚡voltage. Please ensure that the AC devices you intend to use abroad support dual voltage (with "100-240V, 50/60Hz" printed on it). 🌐 To prevent rik of electrical shock, keep unused power pins retracted or folded flat. The adapter is NOT a voltage converter . Only apply to the use of small power electric appliances (6A MAX) when traveling, such as mobile phone, digital products, computer with low power of small household appliances. The travel adapter does not work with high power appliances such as hair straightener, flat iron, hair curler, hair dryer, steam iron, hot water heater, coffee maker, etc [ad_2]

[equiptest]

5 Reasons Why Test Sockets Matter in Precision Field

Test sockets may look small in size, but they are essential tools in industries that require precision testing. To make everything work perfectly before the final assembly, Test Sockets temporarily link electronic parts, such as ICs, for testing. 

From IT to Medical, Test Socket has a profound impact. Let’s take a look at 5 reasons why test sockets matter across multiple fields. 

Ensuring Precise Electrical Connections

In the precision area, where even a minute of signal error can disrupt the entire results, test sockets guarantee an accurate electrical connection. Pylon blocks from Equip-Test offer clean signal routes and safe, reproducible connections between testing platforms and fixtures. 

This is essential for testing intricate components, such as integrated circuits (ICs), identifying flaws early, and saving time. 

Boosting Testing Efficiency 

Fast and dependable testing is vital for high-volume production. Test sockets make this possible by enabling fast insert swaps without sacrificing accuracy, such as Equip-Test’s exchangeable pylon blocks. 

It reduces downtime and expedites workflows, helping you meet tight schedules in busy manufacturing settings. It’s a game-changer for efficiency. 

Enhancing Durability and Longevity

Precision testing demands a lot of repeated use, which can also break down the equipment. Keeping this in mind, we use premium material to build long-lasting sockets that can withstand millions of cycles. 

With a combination of signal, high-current, and pneumatic qualities, their mixed receiver pylon blocks provide consistent performance and outlast conventional alternatives. 

Supporting Customization for Unique Needs 

In the precision field, every testing task is unique. Equip-Test provides pylon interface blocks that are adaptable to different requirements, such as different spring forces or pole counts. 

This adaptability guarantees interoperability with a variety of devices, including telecom and automobile equipment, and consistently produces accurate results. 

Reducing Errors for Greater Reliability

Defective parts can lead to large issues like recalls or safety hazards. These are issues that our pylon blocks address promptly. Pylon blocks offer a dependable, low-resistance connection, which reduces testing errors such as false positives. 

And, because of this dependability, only the best products reach the market, safeguarding both reputation and customers' trust. 

Why Test Sockets are a Game-Changer

In short, Test Socket offers everything from accuracy, efficiency, durability, flexibility, reliability, and others that are required for precise testing.  Want to dive deep into this? Check it out here.

[gluroo]

A recessed can light conversion kit is a convenient and easy way to upgrade or replace your old recessed can light fixtures without the need for a complete reinstallation. These kits are designed to work with existing recessed can housings, allowing you to convert traditional lighting to LED lighting, improving both energy efficiency and lighting quality.

Benefits of a Recessed Can Light Conversion Kit:

Energy Efficiency: Conversion kits typically replace incandescent or halogen bulbs with LED technology, which uses less energy, produces less heat, and has a much longer lifespan.

Easy Installation: You don't need to replace the entire recessed housing. These kits are designed to fit directly into existing can light fixtures, making them simple to install without the need for extensive rewiring or ceiling work.

Cost Savings: By switching to LEDs, you'll reduce your electricity bill over time, as LEDs consume significantly less power than traditional lighting options.

Improved Light Quality: LED lights provide instant brightness and are available in a wide range of color temperatures (warm, cool, or daylight), allowing you to customize the ambiance of your room.

Eco-Friendly: LEDs are more sustainable than traditional incandescent or halogen bulbs because they consume less power and have a longer lifespan, reducing waste.

Dimmable Options: Many conversion kits offer dimmable options, giving you control over the brightness level for different settings or moods.

How to Install a Recessed Can Light Conversion Kit:

1. Choose the Right Kit:

Ensure that the conversion kit is compatible with your existing recessed can fixture. Most kits are designed to fit standard 6-inch or 4-inch can housings, but you should check the product details to ensure compatibility.

LED or Retrofit Kits: Choose whether you want a complete LED conversion or a retrofit kit. LED retrofit kits include the LED bulb and trim, while a full conversion might include additional parts (e.g., a new LED driver or trim design).

2. Turn Off the Power:

Safety first: Before starting any work, ensure the power to the light fixture is turned off at the circuit breaker to avoid any risk of electrical shock.

3. Remove the Old Bulb:

If you're upgrading an older can light, start by removing the existing bulb or trim. Depending on your current setup, you may need to remove the old bulb by twisting it out of the socket or unscrewing the trim.

4. Install the Conversion Kit:

Connect the Retrofit Kit: Many LED retrofit kits include an easy-to-use socket adapter or clip-on mechanism that attaches directly to your existing can light housing. Follow the manufacturer’s instructions to insert the LED light and trim into the can fixture.

Align the LED Driver: If your kit includes an LED driver (which controls the LED light’s voltage), connect it according to the instructions, ensuring all wires are securely fastened and properly connected.

5. Attach the New Trim:

Place the LED Trim: Most conversion kits come with a new trim that clips or snaps into place. Simply insert the new trim ring into the housing, making sure it is secure and flush with the ceiling.

6. Turn the Power Back On:

Once the kit is securely installed, turn the power back on at the circuit breaker and test the light to make sure it’s working properly.

Choosing the Right Recessed Can Light Conversion Kit:

Compatibility: Ensure that the conversion kit is compatible with the size of your existing recessed housing (most commonly 4-inch or 6-inch cans). Some kits also work with both IC-rated (insulation contact) and non-IC-rated housings, so double-check your existing housing type.

Brightness (Lumens): Consider how bright you need the new LED light to be. LED conversion kits are often rated by their lumens (brightness). For general lighting, aim for around 600-800 lumens per light. For task lighting or areas requiring more light (like kitchens), you may want higher lumens (1,000-1,200 lumens).

Color Temperature: Choose a color temperature that suits the mood you want to create. Options range from warm white (2700K) for a cozy ambiance to cool white (5000K) for brighter, more focused light.

Dimmability: If you want the option to adjust the brightness, choose a dimmable conversion kit. Make sure to pair it with a compatible dimmer switch to achieve the desired effect.

Energy Rating: Look for Energy Star-rated kits for guaranteed efficiency and long-term savings.

Trim Style: Depending on your style preferences, choose from different trim options, such as baffle, reflector, or gimbal trims.

Popular Brands for Recessed Can Light Conversion Kits:

Halo: A leading brand in recessed lighting that offers a wide variety of LED retrofit kits, including dimmable options and different trim styles.

Lithonia Lighting: Offers cost-effective and energy-efficient LED recessed lighting retrofit kits with easy installation.

Philips: Known for their high-quality LED products, Philips provides a range of conversion kits that fit various sizes of can lights.

Maxim Lighting: Provides energy-efficient LED can light conversion kits with a focus on both function and design.

Globe Electric: Known for producing LED conversion kits that are simple to install, making them a popular choice for DIY installations.

A recessed can light conversion kit is an excellent way to upgrade your existing recessed lighting fixtures to energy-efficient LED lighting. Not only do these kits improve the quality of light in your space, but they also provide significant savings on your energy bills and require minimal effort to install. Whether you’re upgrading the lighting in your kitchen, living room, bathroom, or hallway, a conversion kit offers an easy, affordable solution for enhancing your home’s lighting system. Make sure to choose a kit that matches your existing can light size, brightness needs, and style preferences to get the best results.

[sngl-led-auto-lights]

How do I choose LED lamps for car headlights?

Here is a step-by-step guide to choosing safe, effective, and legal LED headlights for your vehicle, prioritizing compatibility, performance, and safety:

🚗 Step 1: Verify Legality and Compatibility Requirements | What to Check

Legal Certifications | Check the packaging for certifications like DOT/SAE (US) or ECE R149/R113 (Europe), CE, ROSH, etc. Avoid bulbs labeled "off-road use only." Vehicle Compatibility | Check the model number on the bottom of the bulb or consult your owner's manual for the bulb model number (e.g. H4, H11, 9005). Most vehicles manufactured after 2007 must comply with the CAN bus standard. Look for bulbs labeled "CAN bus," "no errors," or with a built-in decoder.

💡 Step 2: Prioritize Key Technical Specs

Avoid bulbs with vague specifications. Focus on: Chip type:

✅ Osram or Lumileds LED or Sanan or Chinese high-end custom automotive LED (best color consistency, up to 200 lumens/watt efficiency).

❌ Avoid no-name COB (multiple chips on board) LEDs – prone to overheating and damage. Driver/holder technology:

Intelligent IC led driver built-in a all-new CANBUS system: more tolerant of voltage and current fluctuations, no false alarms, no electromagnetic interference (ideal for old and modern models).

Color temperature:

5000K–6500K: pure white with a slight blue tint (best visibility).

7000K-10000K: reduced available light (blue glare).

Power consumption:

Target power of 20-100W per bulb (e.g. 1A at 12V). The higher the power, the brighter the light – efficiency is more important.

🌡️ Step 3: Evaluate Cooling System Cooling Type | Pros | Cons | Best for

Passive Cooling | Quiet, No Moving Parts, Reliable | Bulbs under 30W only, may reduce output | Everyday lighting in mild climates Active Fan | Can handle bulbs over 40W, stable brightness | Fan noise/failure risk, higher power consumption | High-performance bulbs, extreme conditions Copper Base/Copper Tube Lamp Base + Fan | Excellent Heat Dissipation | Reduced Airflow Space if Not Designed Right | High-quality bulbs, suitable for a variety of extreme environments, design high-power short bulb housing (e.g. H7)

👉 Important: Avoid LED lamps that use zinc and plastic as heat sinks for the lamp body or bulbs that are noticeably noisy when starting.

⚖️ Step 4: Ensure Beam Pattern Accuracy Projector vs. Reflector:

Projector: Better cutoff, can accept wider LED chip sizes (e.g. H1, D2S).

Reflector headlights: require precise 360° matching LEDs (e.g., SNGL LED bulbs with adjustable light pattern).

Post-installation test: Park the car 25 feet from a wall - beam cutoff should be flat or stepped, with no bright "hot spots" or scatter. If not, the bulbs are not optically matched.

🛡️ Step 5: Choose a trusted brand Brands of all levels Price range Why they are trusted

High-end brands: Philips Ultinon, Osram Night Breaker, SNGL, $100-200 per pair, OEM-grade EMC shielding, intelligent IC led driver built-in a all-new CANBUS system, perfect beam focus Mid-range brands: Diode Dynamics SL1, GTR Lighting Ultra, $60-150 per pair, rigorously tested, optimized heat dissipation, CAN bus support Economic brands: Sylvania, Auxbeam F-16 series, $40-80 per pair, DOT-compliant, reliable output Avoid knockoffs such as "Hikari", "Lasfit" on Amazon/eBay, priced under $30 per pair Inconsistent beam focus, high failure rate

⚠️ Critical checks before installation Voltage and grounding:

Test socket voltage: 11.5-14.4V. Less than 10V? Upgrade wiring or install relays.

Clean grounding points with sandpaper → Make sure connections are tight. Ballast/decoder compatibility:

If adaptive headlights are installed, check PWM signals with a multimeter.

Heat resistance:

Make sure the LED lamp has no dust cover and does not touch the reflector (measured temperature less than 130°C when tested).

🧰 Installation points Do:

Apply dielectric grease to connectors.

Secure wiring with cable ties, away from moving parts.

When testing, run the lamp for no more than 5 minutes at a time to check for heat buildup.

Don't:

Touch the LED chip with bare fingers (oil will damage the coating).

In modern vehicles, run CAN bus lamps without decoders → instrument panel warning.

⚖️ Legal vs. Performance Tradeoffs Requirements Ideal Compromise Legality (DOT/ECE) Philips Ultinon or Osram Diode Dynamics SL1 or SNGL (some bulbs are not DOT compliant) Maximum brightness GTR Lighting Ultra G5 (30W) Auxbeam F-16 series (EMC risk) Plug and play Sylvania ZEVO (fully compliant) Economy bulbs (may require resistors)

🔧 Troubleshooting common issues Flicker: Add load resistors (if not CAN bus), or upgrade to FET driven bulbs.

Beam dispersion: Install anti-glare shield or use projector SNGL retrofit kit.

Overheating: Replace with lower wattage/passively cooled models.

Bottom line: Prioritize LEDs that are legally certified, efficiently cooled, and have a well focused beam. Avoid power-brightness claims—focus on chip quality and manufacturing materials. For most drivers, SNGL or Philips Ultinon bulbs offer the best balance between safety and output. Always compare to your car's factory halogen lamps in real-world tests - accurate aiming is more important than actual lumen values!

[autoledledming]

CM6612 H1 LED Fog Lights

Description

CM6612 H1 LED Fog Lights

1. Increase Night Visibility： High-quality CM6612 H1 LED bulbs, each 48W, with a color temperature of 6000K, equipped with 12 advanced LED chips to achieve 360° illumination. The convex lens projects the light farther and forms a focused beam—no dark spots, no shadows—providing wider and clearer visibility to ensure safe and comfortable driving.

2. Safe Beam Pattern： Applied the same beam design as the original high or low forward light bulbs, the ultra-thin LED chip interval provides a wider angle and farther range of light on the road. No blinding or dazzling oncoming drivers, ensuring a safe driving experience.

3. No Additional Adapter Required： NO POLARITY, 1:1 mini design same as halogen bulbs. No worries about the narrow space of the housing and no need for extra adapter—real plug and play, directly fits into your socket.

4. Longer Life： Lifespan up to 50,000 hours: Made of aviation aluminum with excellent heat dissipation performance, the carefully designed heat pipe radiator design increases the heat dissipation rate and the turbine cooling fan ensures a lifespan of up to 50,000 hours, reducing the need for frequent replacement of bulbs.

5. Easy Installation：

Fits into your housing and factory sockets without any modification—just plug and play. CM6612 LED headlights match 99% of the vehicle models. If you don't know what type of light bulb your car is suitable for, please check your owner's manual or the part number on your original bulbs to confirm the bulb type, or search for "car bulb finder" to confirm the model.

CM6612 H1 LED

*.Power supply: 12 or 24VDC cannot be shared *.SMD3570： chip high-power 48W *.12 flip-chip ：packages, stable lumen output using constant current IC. *.Efficient heat conduction.*.High lumen output up to 4700LM- white& 4300LM-Warm white.