14bruises

[14bruises]

router login username and password

[14bruises]

Router IP address 192.168.0.1

192.168.0.1 is a personal IP address used to login the admin panel of a router. 192.168.0.1 is pre-specified by the router companies as the default gateway address and may be used to create various adjustments to the router's settings.

How to Login to 192.168.0.1?

To login into 192.168.0.1 follow those steps --

Open an internet browser and go to http://192.168.0.1 or type 192.168.0.1 to the browser URL bar.

A login page will appear asking you to enter the login password and username.

Input the username and password in the specified fields.

You will now be logged in into the Admin Panel of the router.

Notice: If you are unable to access the router admin panel at 192.168.0.1, consider using another IP address -- 192.168.1.1 or 10.0.0.1.

If you've forgotten the IP Address Username and Password or even if they are not working then you can --

Consider the manual/box or back of router. (or check default username and password list).

In the event that you changed the password and have lost it or forgotten it then you need to do a factory reset. To do so, look for a small hidden RESET button on the rear of your router. Press and hold that button for about 10-15 seconds using a paper clip or a needle. The router will reboot itself and will be back to default settings.

How to Change Route IP Address?

The default gateway IP address comes pre-assigned from the online service provider, though, a user may configure it par to demands. It is frequently changed to prevent bad guys access your admin panel, stop DDoS attacks, or just to add an extra layer of safety. Here is the way to do it -- TP-Link:

Login into a default admin panel at 192.168.0.1 or 192.168.1.1 (admin/admin is password and username )

Go to Advanced settings > Network > LAN.

Under"IP Address" field you may change it to a preferred address for example 192.168.1.2.

Save and the router will reboot to apply the changes.

Login to your router configuration page (username: admin & admin: admin/blank)

Visit Setup > Network Settings.

Now you will find Router IP Address field.

Change it preferred and Save Preferences.

Linksys:

Login to Linksys router settings page through 192.168.0.1 or 192.168.1.1 or you can access via http://www.routerlogin.net or http://www.routerlogin.com.

Once logged in browse to Advanced > in left side menu go to"Setup" > LAN Setup.

Under LAN TCP/IP Setup, you will see IP Address. Change 10.10.10.1 as favored.

Apply Changes and the machine will reboot to update configurations.

Whatever the case throughout the procedure something goes wrong, you might reset your router to default factory settings so all of customization will be reverted back. Assessing your WiFi network is very important to avoid unauthorized access. Follow basic rules like enabling WPA2 encryption, setting up strong password, disabling WPS adds more security since it is an old technique of synchronization between networks, enable MAC-address filtering and update your router firmware occasionally. Here's a complete guide about how best to protect your WiFi network.