electronics-components - Tumblr blog

[electronics-components]

FEATURES:

4.2V/3.6V Battery Charging Module

Can Charge Lithium Ion And Lithium Phosphate Battery

Adjustable Output Current

Recommended Input Voltage: 4.5V – 7V DC

Embedded Switching Regulator

Single Battery Charger Module

Programable Charge Curren Form 0.1A to 2A

Programable Precharge Current Form 10% to 100%

LED Indication 

[electronics-components]

Features:

4-level LED lamp display power, not working state intelligent automatic shutdown;

The built-in lithium battery protection IC, over-current, overpressure, under-voltage protection;

Dual USB output ports.

Input requirements: 5V constant voltage power supply can do charge input power, the most matching charger for 5V 1A above

Requirements for rechargeable batteries:

Compatible Batteries: 18650 batteries, cell phone batteries, flat-panel batteries, MP3 batteries, etc. 3.7v-4.2V polymer Lithium battery.

[electronics-components]

This is Red Plus 25W Soldering Iron with LED Power Indicator, ideal for beginners. This low cost soldering gun comes with the light and heat resistant handle, and replaceable soldering bit. It attains full operating Temperature within few seconds and maintains constant tip temperature.

[electronics-components]

The main constituents of 60/40 solder wire are Tin (Sn) and Lead (Pb). This Solder wire is made of the high purity of rosin and proprietary activators which provides rapid wetting and good spreadability. This solder wire has good solderability, insulation resistance, No spattering and non-corrosive. Its composition is 60:40 of Tin and Lead respectively.  Widely used in electrical and electronics, solder parts like a circuit board, electronics devices, and others.

[electronics-components]

A two-channel relay module featuring 2x Omron G3MB-202P solid state relays. This 5V 2-Channel SSR Solid State Relay Module 240V 2A Output with Resistive Fuse is capable of switching AC voltages between 100 and 240V at up to a 2A current. The module can be controlled from a 5V digital source such as an Arduino microcontroller.

This is a 2 Channel SSR relay module, each relay channel has 3 separate terminals, NO (Normal Open), COM (Common), NC (Normal Closed). When the input logic voltage is applied to the coil, the NC will disconnect from the COM breaking the conductivity between the two. At the same time, the NO will connect with the COM allowing conductivity between them. Depending on your wiring this will turn on or off the connected load.

[electronics-components]

Electronics Components #components #electronics #engineering #electrical #arduino #electronic #innovation #design #robotics #electroniccomponents #raspberry #technology #manufacturing #industrial #gaming #school #learningbydoing #solar #bahrain #pc #pcb #budaiya #muhharaq #manama #engineeringforkids #saar #riffa #makersgonnamake #isatown #summerprogram

[electronics-components]

The Arduino Uno R3 is an ATmega328P microcontroller-based development board. This is widely popular in Embedded electronics because of the available resources and easy to use by everybody features. With 14 digital input/output pins where 6 can be configured and used as PWM outputs, 6 as analog inputs is a great addition for I/O related operations. Powered with a 16 MHz ceramic resonator, an USB connection, a power jack, an ICSP header, and a reset button.

[electronics-components]

This BNC plug is used in many applications such as audio, video and networking equipment to connect a variety of different coaxial cables. It is placed at the end of cables to connect electronics equipment like CCTV DVR. 

[electronics-components]

USB to DC Plug Converter wire Adapter cable - 50cms

[electronics-components]

The XL4005 Power supply module is based on the XL4005 Dc-Dc converter IC. The module can step-down and regulate a voltage from 0.8V to 32V based on the position of the potentiometer. The Potentiometer used here is a 25-turn potentiometer that provides easy adjustment of the output of the module to exactly the voltage application needs. The maximum output current can go as high as 5A making it suitable to power heavy loads like CNC machines, Robotic Arms or even to charge batteries. 

[electronics-components]

This 16 Channel Relay Module consists of sixteen 5V relays and each one of the individual relay needs 15-20mA driver current. This module has a light coupling protection (optocoupler) which provide opto-isolation for safety purposes. This is a Relay module of 16 channel interface board that can be control various appliances, and other electronic equipment with large current. It can be controlled by Micro-controllers like Arduino, Raspberry-pi, ARM, TTL logic directly.

[electronics-components]

Repairing and Servicing of any Electronic components board like TV, DVD or PC is not an easy task and with advancements in technology ICs are getting smaller and smaller with each day. ICs can get easily damaged if removed in incorrect manner from their Sockets and DIP Holders which is a costly mistake and can make the whole board useless or you can get shock from the static charge present on the board due to capacitors present and can hurt yourself. To prevent this from happening this PLCC IC Chip Extractor / Motherboard Circuit Board Component Plier Puller Tool will make your life easy. It is very easy to use and is made up of High quality steel and plastic coating over it to make it last long and prevent you from getting any shocks. You can easily hook it to the IC packages on the board and pull them out without any fear of damaging them.

[electronics-components]

SIM800L V2 5V Wireless GSM GPRS MODULE power supply for 5v, computer debug USB to TTL serial port. Power to the output current of 800mA, TTL serial interface is compatible with 3.3 V and 5 V micro-controller, can be directly after purchase and single-chip computer connection.

[electronics-components]

The YF-S201 sensor is widely used water flow measurement sensor used in different applications such as a robotic cocktail dispensing machine, accurately measure components like Soda, Water, etc. This has only three pins and comes in a compact size to fit in the application area without any big effort.

[electronics-components]

This flame sensor or fire sensor module works on the concept that when a flame or fire is burning it emits IR signals. This IR signal is then received by the IR receiver on the fire sensor module to detect the flame or fire.

The sensor has an operating voltage from 3V to 5.5V and has both digital and analog output. The sensitivity of the digital output can be controlled by the on-board potentiometer. Detection angle of sensor is 60 degree and range is theoretically 100cm but practically you can get upto 20-30cm

[electronics-components]

The INMP441 MEMS microphone module with digital output and low power consumption offers a 24-bit I2S interface and outstanding signal-to-noise ratio (61 dBA) and high sensitivity (-26 dBFS), ensuring precise sound capture. Its stable frequency response from 60 Hz to 15 kHz makes it perfect for near-field applications. With direct compatibility with digital processors like DSPs and microcontrollers, it simplifies integration. 

[electronics-components]

MAS830L is a 3 and ½ Digit multimeter that is very useful for general purpose electronic testing. This is a Battery operated Digital multimeter with proper insulation and clear display even in high light condition.