jemmymarin

[jemmymarin]

5 Ways To Tell Whether A Diamond Is Real Or Fake

Scratch Test

This test is based on the fact that diamonds are one of the world's toughest substances, capable of cutting through glass. This is the scratch test, and it should demonstrate whether or not your glass is genuine. All you need is a glass dish and your diamond.

Place the glass on a table and use your diamond to make some scratches on it. If you receive a scratch, your diamond is probably genuine. If you don't, it's a fake.

Fogging Test

Fogging it with your breath is a quick and easy technique to recognize a real diamond from a fake. It should clean up in a second or two, confirming that your diamond is genuine. If it remains fogged up for three or four seconds, you're probably holding a replica.

Diamonds rapidly distribute heat, making fogging impossible. However, none of the diamonds had the same impact.

Float Water Test

This test stands out as one of the easiest, but inconclusive, tests. Because diamonds have a very high density. This test requires a glass of water and a diamond.

Place the diamond in the glass of water. If it's genuine, it'll sink to the bottom. If it is a forgery, it will float on the surface of the water.

Heating Test

Diamonds are heat insensitive due to their extremely robust material composition. This approach is often referred to as the heat test. This test requires a glass of cold water, a pair of fireproof gloves, and a lighter.

Heat the stone for about 30 seconds before dropping it into the chilly water. If the stone cracks, it indicates that the diamond is a fake since genuine diamonds would not respond. This procedure demonstrates the stone's strength and quality.

Sparkle Test

You may do the test using only your smartphone's flashlight. You're probably wondering how to use a flashlight to determine the authenticity of a diamond ring.

It's simple since you just need your eyes for this quick and easy exam. You should also be aware that a diamond reflects light quite well, producing intense glitter. All you have to do is hold your diamond up to a standard bulb and see how it shines and shimmers.

[jemmymarin]

Birthstone For April Month

A birthstone is a gemstone that marks the month of a person's birth. Birthstones are said to provide the wearer good luck, health, and protection. The diamond is the birthstone for persons born in April.

Diamonds are renowned as one of the hardest stones on the planet, taking billions of years to develop naturally. Once they do, it is supposed that they will endure forever, or nearly so! Diamonds are among the most aesthetically pleasing of all contemporary birthstones.

The name "diamond" is derived from the ancient Greek phrase "Adamas." It was an apt title for the virtually indestructible construction, with a direct translation of "invincible."

If you look closely, the diamond's history may be traced back to the fourth century BCE, when it was originally discovered in the rivers of India. It was prized by royalty and the rich.

[jemmymarin]

How Does Fluorescence Affect Color Grade?

Diamonds with very intense blue fluorescence can have a color grade two levels higher when examined under fluorescent light than when viewed under non-UV illumination. Strong blue fluorescence may differ by one grade, whereas medium fluorescence may differ by half a grade. The consequences of slight fluorescence are insignificant.

Fluorescence may make diamonds of T-M tone look up to one grade whiter since the fluorescent light is generally blue (the alternative shade to yellow). Approximately 25% to 35% of all diamonds submitted to GIA for grading exhibit some fluorescence.

In contrast, a diamond with a J color, any clarity, and medium fluorescence would normally sell for up to 2% more than a comparable stone with no fluorescence. However, as previously said, the difference is not insignificant, since fluorescence may significantly improve the visual hue of a light-colored diamond.

[jemmymarin]

Which of the 3 diamond types is best?

The three main categories of diamonds are fancy coloured diamonds, lab-grown diamonds, and diamonds that have been mined. Which, is the best? What you value the most and your specific criteria will determine this.

Mined diamonds- If you want to acquire a priceless, timeless precious stone and have the money to spend on it, this sort of diamond is the conventional option.

Lab grown diamonds- A high-quality yet reasonably priced option is this kind of diamond. Additionally, if you care about the environment and society, this is the best choice for you. Fancy colored diamonds- If you're seeking for a special, extremely expensive piece of jewelry that not everyone can acquire, this sort of diamond is ideal for you.

Depending of the diamond you select, it will be ideal for you. Only you are able to evaluate each one's worth and advantages. The fact that you have three alternatives to choose from is ultimately the best.

[jemmymarin]

September Birthstone History & Symbolism

The sapphire, September's birthstone, is regarded to be one of the most desirable jewels for the bulk of human civilization. It symbolises traits such as honesty, faithfulness, and truth.

The sapphire has established a reputation as one of the most romantic and regal stones on the globe. So, what does this gorgeous and unique stone represent for (fortunate) September babies? Continue reading to learn more about the sapphire's significant history and hopeful future!

September marks the start of the lovely and romantic fall season.  September's birthstone is sapphire, which denotes devotion, passion, and high society. It's a favourite gemstone for engagement rings, particularly among members of the royal family.

While blue sapphires are the most usually associated with sapphires, they are available in a variety of other stunning colors. Yellow sapphires are often regarded as the official sapphire birthstone color for September. Choose your preferred color and it still counts as a September birthstone.

[jemmymarin]

Difference Between Engagement And Wedding Ring

Most people consider Engagement and Wedding ring the same. But they are different. Let's understand the basic differences between both of them.

An engagement ring is often given at the time of a proposal or shortly after a couple has agreed to become engaged. The ring usually has one main stone placed in a variety of band designs. However, current options include three-stone rings, cluster rings, and even bands that are traditionally thought to be more of a wedding ring form.

A wedding ring is often exchanged at the marriage ceremony as the formal sign of the marriage union. Both rings have traditionally been worn together, frequently as bridal sets or even soldered together in certain circumstances to form one item.

These days, however, we find an increasing number of customers wearing their wedding and engagement bands in unorthodox fashions, whether on separate fingers or stacked with other rings. Wedding bands are often simpler in design, consisting of a band with no huge stones or a focal gemstone.

As per me, you should buy both the engagement ring and wedding band together they together referred to as bridal sets. If both the rings are complementing each other then it is the best choice.

[jemmymarin]

Asscher-Cut Diamonds

Joseph Asscher invented the Asscher cut in 1902. The look of an Asscher-cut diamond is comparable to an emerald. They are also known as modified emerald cuts because they have 58 facets with a flawless detailed design, providing greater inner lightning and fire.

The Asscher cut was reinvented in 2001, by Edward and Joop Asscher (grandchildren’s of Joseph Asscher). And the name given was Royal Asscher Cut. The revised Asscher cut has 72 facets and greater fire and brightness than the preceding Asscher cut.

The stone's table is flat and provides an excellent view into the center of the stone, enabling inclusions to be visible to the human eye. As a result, it is advised that you consider selecting a stone with a clarity grade of VVS2 (Very Very Slightly Included) or VS1 (Very Slightly Included). Even though you might easily go lower in the clarity range for other cuts, for step cuts like the Asscher cut, you must not go lower than the VS2 (Very Slightly Included 2) clarity.