readersbay

[readersbay]

Borderlands 3: How to Start Moxxi Heist of Handsome Jackpot DLC

The first-ever appeared DLC story of Borderland 3 was released in December 2019 and is known as Moxxi Heist of the Handsome Jackpot DLC. As it is pretty fresh, gamers are not familiar with its aspects, thus facing difficulty even in starting it. In the blog, we have provided a proper workaround that contains all the essential information about Borderland 3’s Moxxi Heist of the Handsome Jackpot DLC. Make sure that you read the blog carefully to get the maximum results.

Moxxi’s Heist of the Handsome Jackpot DLC

To begin the process players should visit Sanctuary as the access of Sanctuary can only be granted after reaching Chapter 4, thus meaning that players need to upgrade their level. This criterion is an in-built feature of the game to base this DLC access approach on the level of the player.

Start Borderlands 3 DLC

Below we have written steps to make this workaround more convenient for you, so make sure that you read carefully and execute all these steps wisely in your game.

As discussed above, make sure that your player level in the game is enough, and you have purchased Moxxi’s Heist of the Handsome Jackpot DLC to proceed towards this step.

First, players need to locate and visit Sanctuary to begin the process of Moxxi’s Heist of the Handsome Jackpot DLC.

After that, players need to head to the bar of Moxxi, and on the left and front gate of the bar, players will locate a poster of Handsome Jack.

After you locate this poster, you will get access to start the Borderlands 3  Moxxi’s Heist of the Handsome Jackpot DLC.

As mentioned earlier, players who haven’t bought Moxxi’s Heist of the Handsome Jackpot DLC will encounter an on-screen prompt from the game while they interact with Handsome Jack poster.

If you are one of those players, then immediately buy the access from the Borderlands 3 Store and get back to the game to start this process.

Conclusion

The new Borderlands 3 DLC is a prominent initiative taken by Gearbox Software to enhance the gaming experience of Borderlands 3. The expansion in the story, along with its famous looter shooter and considerable advancement in the gear section is pretty intriguing. There are several Legendaries available in Moxxi’s Heist of the handsome jackpot that players will wish to witness.

We hope that this blog has served your purpose, and you have successfully attained access to the all-new Moxxi’s Heist of the handsome jackpot. Make sure that you read this blog carefully, and if you are new to the world of Borderlands 3, then you can witness its gaming experience on these devices such as Stadia, Xbox One, PS4, and PC.

I’m John Smith. I’m a web developer living in Texas. I am a fan of design, technology, and coffee. I’m also interested in reading and food. You can read my blog on office.com/setup with a click on the button above.

Source:  Borderland 3

[readersbay]

Fortnite: How to Complete Stoke Coze Campfires in Winter Challenges

Fortnite has now involved the players with its latest challenges, aka winter challenges. The Challenge will disappear after the winter holidays, and thus, the chance of attaining gems and several essential items will also go with it.

The winter challenges consist of several challenges, and each Challenge consists of unique rewards. These challenges can be completed with a bit of ease; however, several players are facing difficulty in completing them.

One of the Challenges that is becoming a headache for gamers is Stoke Cozy Campfire. This Challenge requires the player to stoke a Cozy Campfire, and in return, players will get a unique winter-themed reward. Below we have mentioned a proper workaround that will guide the players to complete this Challenge efficiently. Make sure, that you follow each way and their steps carefully.

About Cozy Campfire

As we discussed above, it is one of Challenge of the Fortnite Winter Challenges event. Those players who are not familiar with this Challenge can locate it by opening the Snow lake option from the main menu. After that, they need to tap the option of Winter Lodge challenges and select the Stoke a Cozy Campfire. Players cannot locate the location of missions by using the map, so the mission of Stoke a Cozy Campfire can be found by players in nearby houses with Christmas trees.

How to Complete Stoke Cozy Campfire?

Several previous versions had also summoned Cozy Campfire challenges before, and in them, players are granted to carry Cozy Campfires to heal them during battles. But in this winter edition, the players are not allowed to carry Cozy Campfire because players need special items to carry these campfires. Along with that, one campfire can lit one time, so players should head towards the second campfire after the first gets burned.  Now, players need to locate as much campfire as they can by using maps and a hint of a Christmas tree.

After its official release, the Fortnite franchise is quite keen about celebrating festivals by including themes such as Winter or we encountered Christmas last year. This initiative of Fortnite developers is quite fascinating as it keeps merge the players both worlds together. Along with that, there is a lot of attainment of experience and gifts by completing these challenges. After players complete the Cozy Campfire Challenge successfully, they will be rewarded with Winter-themed Sweater.

Conclusion

Fortnite is quite eager to stun its fans as they keep on launching new and several updates. Similarly, a couple of days back, they have intrigued their fans by releasing Star Wars events, which include popular rising celebrities such as Ben Schwartz, Geoff Keighley, and J.J Abrahams. They have also added several Jedi-themed such as Lightsabers or Imperial blasters.

We hope that this blog has served your purpose, and if you are new to the Fortnite world, then you witness its gaming experience on gaming devices such as Xbox One, PS4, Nintendo Switch, and PC.

Ava Williams is a Norton product expert and has been working in the technology industry since 2002. As a technical expert, Ava has written technical blogs, manuals, white papers, and reviews for many websites such as norton.com/setup.

Source:  Fortnite

[readersbay]

How to use Apple’s Health App

Apple released its health app for iOS 8 and the latest versions and the App has features that provide you to monitor your health and secure your health data. In iOS 10, you will get some changes like Today part and so-on.

Health records.

These days.

How to see health records in Today.

How to show a health record from an app.

How to find out Health apps.

How to allow the screening of your Medical Account in an urgent situation.

Health records

A health record is your first page of the app where you can see the given options like Mindfulness, Activity, Nutrition, and Sleep. Secondly, you can see the option of Reproductive Health, Body Measurement, Vitals, and moreover, that you get many more options like Resting Energy and so-on.

These days

You can see another wing as These days, where you can see health records of each category. This can be considered as one file of your related paper to your medical condition for that specific day. It won’t show prior day data for that you have to opt for the option of selecting the prior day date.

How to see health records in Today

Open the Health App by tapping on the app icon.

Click on Today.

Roll up down to see your data of the day.

Click right for viewing prior day record.

Click the category to see details.

Select the time era of records any Day, Week, Month, Year.

How to show health record from an app

Open the Health App by tapping on the app icon.

Select category.

Roll down and select the option of records that you want to see.

Click record and start.

Click change.

Select a device or app,  with you, want to share records.

How to find out Health apps

You can find another related app in the app; here is the process to find it.

Open the Health App by tapping on the app icon.

Select category.

Tap on suggested apps.

Click on the app you want to use.

Select the BUY button, and you will notice that the process of downloading the app will automatically start.

How to allow the screening of your Medical Account in an urgent situation

Start app.

Click Medical Account.

Select change.

Give permits to toggle turn on locked.

I hope you can now easily use this Apple’s Health App to monitor your health conditions with this given guide.

I’m John Smith. I’m a web developer living in Texas. I am a fan of design, technology, and coffee. I’m also interested in reading and food. You can read my blog on office.com/setup with a click on the button above.

Source:-  Apple’s Health App

[readersbay]

How to Fix Vudu 28 Error?

The web is filled with numerous streaming services, but several of them stand out from the crowd. Vudu is one such service as the streaming platform is one of the most used ones over the globe. Over the years, streaming services have taken over the entertainment industry, and reasonably so. Gone are the times when people had to wait for watching their favorite content. However, the services are not free of errors either, as you can encounter countless error codes on them as well. One such error in Vudu is Error 28, and here we will help you solve it.

Check for Open Ports

If you would like to check for open ports, then abide by the given steps.

Hold the Win + I key at once on your keyboard to launch settings and select the ‘Update and Security’ option.

You have to choose ‘Windows Security’ option within the left-hand side panel and select Firewall and Network Security.

Choose ‘Advanced Settings’ within the list.

Now, you will see a new screen, select ‘Inbound Rules’ and then choose ‘New Rule.’

You have to choose the ‘Port’ option and select the Next option.

Navigate to the ‘TCP’ and choose ‘Specified Local Ports.’

You should type the pursuing Port Numbers using commas to divide them: 

‘843,13207,13217,13227,13237,13257’

Go to the Next and choose the ‘Allow the Connection’ option.

Thereafter choose the Next option and ensure that all three choices are ticked.

You should select the ‘Next’ option and type a ‘Name’ for the latest rule.

Navigate to the ‘Next’ once you write a name and select the Finish button.

Finally, redo the over procedure for ‘Outbound Rule’ and look for when the problem continues.

Modifying DNS Settings

If you wish to modify the DNS settings, then pursue the given instructions.

Go to the Network button and right-click on it on the lower right-hand side.

You have to select the ‘Open Network and Internet Settings.’

When the prompts come, select the Change adapter options on the screen.

Navigate to the network adapter, and right-click on it, then choose the Properties option.

You should find the ‘Internet Protocol Version 4 (TCP/IPv4), show up it, and select the Properties option.

Then choose the box of ‘Use the following DNS server addresses.’

After that, enter 8.8.8.8 in the box of desired DNS Server and 8.8.4.4 into the box of ‘Alternate DNS Server.’

you have to select the Apply button and then choose OK.

Finally, open the Vudu and check whether the issue has been fixed or not.

John Smith is an avid technical blogger, a magazine contributor, a publisher of guides at mcafee.com/activate, and a professional cyber security analyst. Through her writing, she aims to educate people about the dangers and threats lurking in the digital world.

Source:- Vudu 28

[readersbay]

How to Fix Error 80048821 in Xbox Live Sign in

Xbox Live offers numerous games for the users to enjoy; however, you can get am Error 80048821 while trying to log in on the platform.  If you face the same error and want to fix it, then you are on the right post. Read the blog and follow the instructions to remove the Error 80048821 in Sign in of Xbox live.

Here are the solutions to fix the Xbox live error:

Check the password for the Microsoft account

Update security data for the Microsoft account

Shift and then download the profile of Xbox Live again

Remove system cache

Remove Marketplace System Data

Clear the latest update

Start the Xbox Console again

Check Password for the Account

Ensure that the password you typed is correct. If you cannot sign in or forget your password, then you can try to reset your password. Type the Microsoft account information and follow the given steps.

Update Security Data for the Microsoft Account

Users can add security information to:

Microsoft account that already exists

When users create Microsoft account

Users can include security by adding a new email or contact number in an existing Microsoft account.

If you want to add a new email or contact number, then you can follow the provided steps:

Sign in to the Microsoft account.

Go to the Security section.

Choose Update below Update my security info option.

Select update my info on the Security basics page.

Add the new contact number and new email address, then follow the steps mentioned to add and then verify the security information.

When the security information is updated for the account, then log in to Xbox and try again.

Re-Download the Profile of Xbox Live

If you have an extra USB, then you can utilize it as the memory unit. However, before that, you must format it. When it’s completed, follow the provided instructions to move or migrate the profile to the USB.

Plug USB into a console and click the Guide tab on the controller.

Open Settings.

Click on System Settings.

Select storage.

Tap on All Devices.

Choose Game Profiles.

Then Press the gamer profile.

Click on Move option.

Select the USB in which you want to shift the profile.

Download the profile again.

Remove System Cache

Follow the provided steps to remove system cache:

Click on the Guide option on the controller.

Go to settings.

Tap on System Settings below settings and locate Storage or memory. Then hit on it.

Highlight the storage device and click ‘Y’ on the controller to delete the cache.

Choose yes, if the message appears to confirm the device maintenance.

Remove Marketplace System Data

Go through the offered instructions to remove Marketplace System Data:

Click on the Guide option on a controller.

Open Settings.

Select System Settings.

Choose Storage.

Tap on the primary storage device.

Press Done.

Hit the System Items option.

Click on Marketplace System Data.

Select Delete.

Start the console again.

Clear the Latest Update

If you wish to clear the latest update, then pursue the given instructions:

Tap on the Guide option on the controller.

Open Settings.

Click on System Settings.

Select Storage.

Highlight the memory unit.

Click on the controller and tap the given buttons in the following series:

Left bumper

Right bumper

X button

Repeat the process.

Choose Yes when the message to delete the System Update option appears.

Start the Console Again

If the users follow the steps but sill nothing works and you face the same problem, then you can start the Xbox console again to fix the problem. Sometimes turning the Xbox OFF and then ON again can fix the issue.

Ava Williams is a Norton product expert and has been working in the technology industry since 2002. As a technical expert, Ava has written technical blogs, manuals, white papers, and reviews for many websites such as norton.com/setup.

Source:- Xbox Live

[readersbay]

How to Fix “Broadcasting isn’t working” Issues on Windows 10

“Mixer” is the broadcasting and streaming service provided by “Microsoft Corporations.” With the help of “Mixer,” you can make a video of your gaming skills and then stream or broadcast it as you wish. However, you can encounter an error stating “Broadcasting isn’t working.” Read through the blog to fix the issue.

Uses of Mixer

“Mixer” is basically a build-in streaming service developed for gaming purposes. Playing games not only entertains the players, but it also entertains and makes others excited when they watch fun game plays.

Here are the uses and benefits of “Mixer” :

The players can make their own professional gaming videos based on their skills and techniques.

The player can broadcast his video online and share it with others through its streaming and sharing features.

You need not download any other 3rd party software or program for streaming or broadcasting your game.

You can watch your broadcasted game that you have streamed earlier.

It has various features for streaming and broadcasting.

Sometimes, while launching “Mixer” on Windows 10, it flashes an error message regarding broadcasting issues.

The error message might be as “Broadcasting isn’t working,” or sometimes it crashes on just launching it in a second.

Here is how to troubleshoot the issue of broadcasting in the following ways:

1. Resetting Game Bar

Follow these steps if you wish to reset the Mixer by resetting the “Game Bar”:

First of all, tap on “‘Windows.”

After that, go to the start menu and hit the “Settings” icon that appears as a cogwheel.

Then, enter “Game Bar” in the provided search bar.

After a while, the Game Bar option will open. Then, you have to hit the “Game Bar” there.

Now, select “Advanced.”

Next, look for the “Reset” tab by scrolling down the page.

Hit the “Reset” tab.

2. Permitting Windows 10 to Run Applications Under Background

When you play a specific game, some of the applications will become disabled to give you a smoother experience for playing the game.

First of all, you have to make sure that the “Game Bar” is not included in the list of deactivated apps running in the background.

You have to make sure that the apps running in the background are turned “ON.”

First and foremost, tap on “Windows.”

After that, hit the “Settings” option there.

Now, tap on “Privacy.”

Next, navigate to the section tab of Background Applications.

Now, check the option “Let applications run in the background” slide bar is switched “On.” If not, turn it on instantly through the slide bar.

I’m John Smith. I’m a web developer living in Texas. I am a fan of design, technology, and coffee. I’m also interested in reading and food. You can read my blog on office.com/setup with a click on the button above.

Source:- Windows 10

[readersbay]

How to Fix the Surface Pen not Writing, Opening Apps, or Connecting to Bluetooth

Surface Pen is one of the handiest devices available currently, but sometimes it stops working some basic tasks. You can do several things to troubleshoot the Surface pen and if you want to fix it too then, you are on the right post. Go through the blog and follow the steps to fix the Surface pen.

How to Troubleshoot the Problems of Surface Pen

If you want to troubleshoot the problems of a Surface pen, then you can follow the provided steps:

Check the pen by writing, inking, or erasing in the sticky notes, fresh paint. If the pen works on these apps, then there must be a problem with the app.

Go to apps and use the Surface with touch. And when the touch starts working, use the pen.

Check the level of the battery. If the users have paired the pen with the device, then they can check it on Settings.

Open Start.

Click on Settings.

Select Devices.

Choose Bluetooth and other devices.

Then locate the pen and check the battery level. If the battery is down or battery is not charged, then the users have to charge or change the battery.

Check the settings of a pen. To test the handwriting, cursor, or top tab settings:

Open Start.

Click on Settings.

Select Devices.

Choose the Pen and Windows Ink option. To check the pressure of pen settings, open the app, and choose Pen option to fix it.

Connect the surface with a pen. Check the lights on the pen.

Update the surface drivers and firmware.

Run diagnostic toolkit of Surface.

Troubleshoot the Problems of Surface Pen

Surface Pen Is Unable to Ink

If you want to troubleshoot the problems when Surface Pen is unable to ink, then abide by the given steps:

Check the lights. If the light does not turn on, then it is a power problem.

Run Windows Updates and Surface Diagnostic Toolkit.

Start the Surface.

Change the battery.

Surface Pen Do Not Connect with Surface Device

In case you intend to Surface pen that does not connect with the Surface device, go through the below-mentioned steps:

Click and hold the top button until lights blink to switch on the pairing mode of Bluetooth.

Go to Start

Open Settings.

Select Devices.

Choose Bluetooth and other devices.

Ensure that the Bluetooth turns ON then choose the  Add Bluetooth or other device option.

Tap on Bluetooth.

Select the Surface Pen on the list.

Click Done.

Lights on the Surface Pen Turns Red or Do Not Turn ON

When the lights on the Surface Pen turns red or do not turn ON, then pursue the given instructions:

If the light is flashing red, then users have to remove the battery.

If lights don’t turn ON, but still you can write with it, then LED must be malfunctioning.

If lights don’t turn ON, but you replaced the battery, then the pen has to be replaced.

Pressing the Surface Pen Do Not Open the Shortcut

Follow the provided steps to press the Surface pen that doesn’t open the shortcut:

Open Start.

Go to Settings.

Click on Devices.

Select Pen and Windows Ink to verify the assigned shortcut.

If the battery level is low or not listed, then the user has to change a battery.

Tap Twice Top Button That Do Not Work Properly

In case you need to tap a twice top button that does not work properly, then you need to follow the offered steps:

Open Start.

Click Settings.

Select Devices.

Choose a pen and Windows Ink.

Choose the apps you want the shortcuts to open below Pen shortcuts.

Ava Williams is a Norton product expert and has been working in the technology industry since 2002. As a technical expert, Ava has written technical blogs, manuals, white papers, and reviews for many websites such as norton.com/setup.

Source:- Bluetooth

[readersbay]

How to Use Home Kit Secure Video Cameras in Home Application?

Apple’s security-focused security camera, Home Kit Secure Video allows users to manage the compatibility of the cameras. Beginning with Logitech Circle 2 camera, now it allows sharing, saving, and viewing recordings of the cameras straightly from the app. Here are the steps to manage Home Kit secure video cameras in the Home application.

See Recorded Video within Home Application

You have to open Home application on your device.

Thereafter, go to the Rooms at the lower side menu section.

·         Alternatively, select directly on the camera within the Home button when it’s already set as favorite.

You should go to the room holding the camera.

Navigate to the camera and select a thumbnail image.

You have to swipe right or left side on timeline situated at the end to locate a motion event.

·         If you swipe the timeline, the calendar will come at the upper side of the display. You should be able to use that to skip to any particular date when required.

You should select the favorite motion event. The recording will automatically play, replacing the camera’s live feed.

·         You should be able to playback pause by reaching the left side and use controls of the timeline.

Store Recorded Video within Home Application

You have to open the Home application on your device.

Go to the lower side of the menu section and select Rooms.

·         Also, you should be able to select directly on camera within the Home button when you have it adjust as a favorite.

You have to reach the room with the camera.

Navigate to the camera and choose a thumbnail image option.

·         If you were swiping the timeline, the calendar timeline would come at the upper side of the display. You should be able to use it to skip to a particular date when required.

You should select the favorite motion event.

Go to Share Icon situated on left-hand side.

Select Next close to the upper right-hand side of the screen.

You should select Save Video. It will store the video straightly to Photos application.

·         Finally, you should be able to use the store to files the option to choose the location on the iCloud or phone.

Send Recorded Video within Home Application

You should open the Home application on your device.

Thereafter select the Rooms on the lower side menu section.

·         You should be able to select directly on the camera within the Home button when you have it adjust like a favorite.

You have to reach the room with the camera.

Go to the camera and select a thumbnail image.

You should swipe right or left side on timeline situated at the lower side to locate a motion event.

·         If you were swiping the timeline, the calendar timeline would come at the upper side of the display. You should be able to use it to skip to a particular date when required.

Navigate to the favorite motion event.

You should select Share Icon situated on left side.

Choose Next close to the upper right-hand side of the screen.

Go to contact which you want to video share with.

Remove Recorded Video within Home Application

You have to open the Home application.

Go to the lower side menu bar and select Rooms.

·         Also, you should be able to select directly on the camera within Home button when it is set as a favorite

You have to reach the room with the camera.

Navigate to the camera and select thumbnail image.

You should swipe right or left on timeline situated at the lower side to locate a motion event.

·         If swiping the timeline, the calendar timeline will show at the upper side of the display. You should be able to use it to skip an individual date if required.

Go to favorite motion events.

You have to select Share Icon situated on left-hand side.

Choose Trash Icon to timeline’s right-hand side.

Now, if the pop-up comes, select Delete Clip option.

John Smith is an avid technical blogger, a magazine contributor, a publisher of guides at mcafee.com/activate, and a professional cyber security analyst. Through her writing, she aims to educate people about the dangers and threats lurking in the digital world.

Source:-Video Cameras

[readersbay]

In case you operate the internet regularly and partake in online activities, then antivirus is a must for your system. What better option than McAfee to get the ultimate security for your system. You can get numerous infections, viruses, malware, or spyware when you access the internet. This is not all as you may get infected after plugging an unsafe peripheral device. All this can be avoided with McAfee. Reach mcafee.com/activate to download, install, and activate McAfee antivirus.

[readersbay]

How to Fix the Camera Failed on the Samsung Galaxy

Samsung Galaxy devices take amazing pictures but like any other electronic device, it faces some issues. The most common error being the Camera Failed error. If you are facing trouble while operating your Samsung Galaxy camera, then you are on the right post. Go through the blog and follow the steps to fix the Camera Failed on the Samsung Galaxy devices. 

Cause of the Camera Failed Errors

The error of the camera failed does not include any code error or any detail about why it’s not working. It is not impossible to fix the error as in some cases, it’s a software error. It can be caused due to unfinished firmware update, SD card, or the third party application that may be out of date.

How to Fix Errors of Camera Failed

If you want to fix errors of Camera Failed, then you can follow the provided steps:

Restart the Camera

Most of the software errors ]can be resolved by reset or restart.

Click and hold the Power button to switch off the camera.

When it’s off, leave the camera off for at least 30 seconds before turning it On.

Switch on in the Safe Mode

Switch off the camera and then click and hold the Power button until the Samsung logo displays.

Move the Zoom option to the minus position and hold until screen displays and then release the button. The users will now be in safe mode.

Check the camera if it’s working correctly or not. If still there is an error, then it should be a third-party app that is creating issues with the camera software. Start the camera and delete newly updated or installed third-party apps until the problem vanishes.

Clear the Camera App Cache and App Data

Go to Apps.

Tap on Settings.

Click the Application manager.

Then go to the All button.

Click Clear Cache.

When the Cache is deleted, start the camera again and check whether the error is clear or not.

Clear the Cached Data

Go to Apps.

Open settings.

Click Storage.

Tap Cached data.

Click OK.

Remove and Reformat SD Card

To resolve it, turn off the camera and remove the SD card. Switch on the camera gain and insert it again. Reformat the SD card if needed.

If you have not been prompted to format the SD card, but you still find an error, then you can do it manually by :

Go to Settings.

Click Storage.

Tap Format the SD card.

Update the Camera’s Firmware Manually

Check the firmware version available on the Samsung support site, and if you have the same version, then you can skip it.

Format again the SD card of a camera using the above steps. You have to start it with a blank SD card.

Connect the PC to the camera using USB wire. You can find the SD card of the camera as the USB drive on the PC.

Download the exact firmware for the camera. This will download the zip file.

When the download completes, enlarge the zip file and then copy .bin file on the SD card on the camera.

Disconnect the Camera from PC.

Go to Settings.

Open device information.

Click Firmware Update.

Choose OK.

Click on Body Update from the option, and then the update will start.

When the update completes, start the camera and check whether the error is gone or not.

Do the Hard Reset

Switch off the camera.

Click on the shutter option for 30 seconds. Hold it as well as hold the Power button until it starts rebooting.

Leave the power button but continue holding the shutter option until the recovery screen displays.

Locate Wipe data/ Factory using the Zoom rocker option.

Click the Power button when highlighted.

The user’s camera will reset to the factory setting.

If it doesn’t work, then restore the camera and fix the error and contact Samsung support for any queries.

How to Fix the Error in Smartphone Cameras of Samsung Galaxy

If you want to fix the error in smartphone cameras of Samsung galaxy, then abide by the given steps:

Start the Galaxy Smartphone

Click and hold the Power button and select power off on Samsung models.

Leave your phone at least for 30 seconds before starting it again.

If it does not fix the problem, then follow the next step.

Open Settings.

Click System Updates.

Press Download updates manually. Your system will check the updates automatically.

If there is any, then install it before moving forward.

To check whether the apps are updated, open play store and click the three-bar section.

Select My Apps and games that display and ensure that you are on the Updates button.

Click on Update next to apps or press Update all to update apps. Now check whether the issue is resolved.

Switch on in the Safe Mode

Hold the Power button until the power off option displays, then click and hold the power off until the Safe mode displays.

Click on Safe mode to start the phone.

Check if the camera is working correctly. If it is, then the issue could be the third-party app creating problems in the software.

Start the phone in regular mode and delete the newly installed or updated third-party apps one by one until the issue is resolved.

Stop the Camera and Delete Storage Data

Open Settings.

Click Apps.

Tap on the Application manager.

Select the Camera app.

Choose Force Stop.

Open Settings.

Tap on Apps.

Click Device Maintenance.

Then choose storage.

Click Clear Data or Clear Now to clear the data.

Once the cache is removed, start the camera and check if the issue is resolved.

Remove and Insert Again the Micro SD Card

Switch off the Smartphone to resolve the issue.

Remove the SD card.

Insert the SD card again and switch on the device.

Reformat the micro SD card, if it appears.

Switch off the Smart Stay

Switch off the Smart Stay

Open Settings.

Tap on Advanced Features

Disable the Smart Stay.

Check the camera that the error is resolved.

Empty Cache Partition

Switch off the Smartphone.

Hold the Bixby button, Volume Up button, and Power button to reboot the device. Hold it continuously until the phone vibrates.

Use the Volume Up and Down option to go to Wipe Cache Partition and choose the option with a power button.

When the process is complete, start the phone again and check the camera.

Do the Hard Reset, If This Not Works

If nothing works, then the last option is to do the hard reset.

Open Settings.

Tap on General Management.

Click Reset.

Select the Factory data reset.

It will take back the phone to the factory settings, and then you have to go to the whole procedure.

If nothing works on your device, then contact Samsung’s Mobile Support to get assistance.

I’m John Smith. I’m a web developer living in Texas. I am a fan of design, technology, and coffee. I’m also interested in reading and food. You can read my blog on office.com/setup with a click on the button above.

Source:- Samsung Galaxy

[readersbay]

Norton Setup - If you are not using an antivirus on your system, then you are undoubtedly more prone to get malicious programs infected on your PC. Norton is an antivirus and security programming for Windows, Mac, iPhone, and Android. It has a wide range of highlights for shielding the gadget from different web dangers and the primary highlights in the Norton programming are hostile to spyware, internet browser assurance, antivirus, and firewall security.

[readersbay]

How to Fix 0xD000000D Microsoft Store Error on Windows 10?

Microsoft Store is a go-to platform as it provides a number of applications. However, in case you cannot connect to Microsoft Store, then it may be because of the 0xD000000D error code. Do not worry as it won’t stay the same for long because here are some effective steps to fix the 0xD000000D error code.

Set Date and Time

If you want to set the date and time, then pursue the instructions given below.

Right-click on the clock icon shows on the taskbar.

After that, you should select Adjust Date/ Time.

Then you have to choose the date and time button from the new screen and select Change within the modify date and time field.

Input the date and time and select Change to store the new settings.

Now, you should be able to open the Microsoft Store.

Using Windows Applications Troubleshooter

If you want to use Windows applications troubleshooters, then you can follow the provided steps.

Get started by launching the Settings application within the Start menu.

After that, you should choose Update and Security.

Then you have to select Troubleshoot and choose Windows Store Apps.

Go to the “Run the troubleshooter” option shown on the Windows Store Apps.

You have to wait unless the system finishes the troubleshooting method.

Thereafter troubleshooters will show every error on the screen.

You should apply this fix and wait until the problems are fixed and shut the window.

Now, restart the system and check once again.

Pending Windows Updates Install

If you want to install pending Windows updates, then pursue the instructions given below.

To get started, click on the Start menu and launch the Settings application.

After that, you should choose the Update and security option and select the Check for Updates option.

You have to wait a few minutes, and the system will give you all the available updates list.

Now, reboot the system.

Log in to the Microsoft Account 

If you want to log in to the Microsoft account, then you can follow the provided steps.

Firstly, you have to hit Win + R buttons at once on the keyboard to launch the Run dialog section.

After that, you should enter ms-settings: email and accounts and press the Enter key.

After launches, the email and accounts on the screen, select Add a Microsoft account beneath the Accounts option used by other applications field.

If you have an account, then go to Sign in with a Microsoft account.

You should input the sign-in details to link the Microsoft Account.

Now, reboot the system and launch Microsoft Store once again.

Reset Windows Store with Command Prompt 

If you want to reset Windows Store with Command Prompt, then pursue the instructions given below.

First and foremost, go to the Start menu and enter ‘cmd.’

After that, you should select Command Prompt from the results and choose Run as Administrator.

Input WSRESET.EXE into the Command Prompt screen and hit the Enter button.

Now, reboot the system.

John Smith is an avid technical blogger, a magazine contributor, a publisher of guides at mcafee.com/activate, and a professional cyber security analyst. Through her writing, she aims to educate people about the dangers and threats lurking in the digital world.

Source:- Windows 10

[readersbay]

How to Fix Galaxy Note 10 No Sound Issue

The Samsung Galaxy Note-10 is among the most preferred smartphone gadgets ever with its sleek design, brilliant picture quality and a classic look. It packs one of the top-quality sound systems in the world of electronic devices.

Besides all these top-class features, users claim that they are experiencing sound issues. Some say that their volume is too slow, where some argue that the device sometime produces no sound. 

We are providing various methods to troubleshoot your issue like cache data wiping, notifications adjustment settings, Volume settings, Deleting unnecessary apps, Network reset, Rebooting to safe mode, and so on. 

Follow these offered steps to fix the issue of sound in Galaxy Note 10:

Checking Notification and Volume Settings

1. First of all, launch the “Settings” application on your Samsung device. 

2. Then, select the option “Sounds and Vibration” from the available choices through the provided list.

3. After that, tap on “Sound Mode.”

4. Then hit the “Sound” option there.

5. Now, set the volume to the maximum level and as per your desire through the slider.

6. After that, go to the earlier menu.

7. After that, hit the “Volume” tab and then repeat the above process to adjust the volume as you wish.

8. If you want to set your volume of all the functions to the maximum level, then tap the option indicating set all items.

9. After that, you have to check your device’s volume, whether it is properly working or not. In case it not under the working condition, then follow the next method.

Removing Issue Creating Apps

In case you are facing sound issues in a particular app, then it means that your app is affected by bugs or malware. If you wish to fix the issue, then it is advised to remove the app that contains bugs from your device. You may remove one or more applications, hindering the sound effects of your device.

Removing Cache Files and Data

Now, if you wish to remove the cache data, then follow the offered instructions:

1. First of all, switch on your smartphone.

2. Now, tap and hold the Volume Up button and power key together.

3. Next, release both the keys when the Android symbol displays on your device’s screen while the device is getting On.

4. After that, you will be directed to the Recovery mode automatically. Tap the volume down button to go to the “Wipe cache partition” option.

5. Now, tap the Power key to choose the particular option and tap the “Yes” button.

6. Then, verify your desired choice.

7. Now, your device will start removing all the cache data.

8. When you finish these processes, reboot your smartphone and check the volume of your Samsung smartphone.

Force Rebooting

The reboot method is also an effective way to fix various issues. If you have a problem with your smartphone, then try to force reboot your device in the following ways:

First of all, tap and hold Power and Volume Down buttons     simultaneously.

After that, hold these keys for nearly ten seconds.

Then, volume effects on your device after these steps.

Resetting Device Network Settings

Follow these indicated steps to fix the issue of sound effects on your smartphone:

1. Firstly, tap the “Settings” application to launch.

2. Then, go to the option “General management.”

3. After that, hit the “Reset” tab there.

4. Next, tap on the “Reset network settings” option.

5. At last, hit the “Reset Settings” option to verify your selection.

Booting the Device Under Safe Mode

Booting your smartphone under safe mode will also notify you about harmful bugs and viruses. It will help you to remove various bugs arising in numerous applications. 

Follow these steps if you like to run your device under safe mode:

1. First of all, switch your device off.

2. Then, tap and hold the power key until you see a prompt option for enabling safe mode on your device’s screen.

3. Then, hit the “Safe Mode” option in case you wish to restart your device under a safe state. 

4. Now, after booting the device, you will encounter a “safe mode” option over the screen.

5. Make sure that your sound effect is working. 

If the issue still exists, then it means that any of your apps have bugs or virus which causes issues. In this case, it is recommended to delete such apps one by one until you reach the issue causing apps.

To delete the apps, follow these steps:

Firstly, you should boot your device under safe mode.

Then, start uninstalling applications one after another.

Be sure to begin removing from the recent one and use the rebooting procedure after uninstalling every application.

Keep uninstalling applications until you reached the issue causing application.

Finally, reboot your device and check for the issue once more.

Checking Hardware

If the above methods didn’t work, then you should have to take your device to your nearest service or support center supported by Samsung. The appointed Samsung technician will check and detect the problem inside your phone.

John Smith is an avid technical blogger, a magazine contributor, a publisher of guides at mcafee.com/activate, and a professional cyber security analyst. Through her writing, she aims to educate people about the dangers and threats lurking in the digital world.

 Source:- No Sound Issue

[readersbay]

How to Use the iPhone and iPad Camera Zoom Feature

There is a saying in photography that the best camera is the one you have with you the most. For many people, that’s the camera on their smartphone.Fortunately, if you have an iPhone, your phone’s camera is pretty impressive. Modern iPhone models support cameras that rival standalone devices that cost thousands.

iOS Cameras

The iPhone camera has evolved tremendously over the years. The original iPhone took photos but didn’t do much more. The iPhone 4 added important features like flash and zoom, while the iPhone 5 brought support for panoramic images. Later models added burst mode, portrait mode, and much more. The iPhone camera can zoom in and out with ease. Doing so is much like how you zoom in on web pages, pictures, etc.

How to enable pinch zoom on iOS devices

The pinch gesture is the best way for zooming into the iOS devices. It is a digital zoom feature that allows you to zoom in the image. iPhone and iPads enable to zoom up to ten times according to its image resolution.

Just launch the camera application of your iPhone and point the     camera on the image that you want to capture.

Keep two fingers simultaneously on the part of your screen that you want to zoom into.

Now spread both of your fingers apart simultaneously to zoom in.

If you have reached the maximum extended limit of zoom in, bringing down both of your fingers in the pinching mode.

If you got your desired image magnification posture, tap on the iPhone screen to capture it. 

Steps to apply zoom-in feature with the help of slider on your iOS device

In case you have an iOS device prior to iPhone 7, you have to     use pinch-zoom gesture on it. You will find that the slider appears on     either side of your device screen. You may capture a more précise zoom     image by these steps:

         1. To use the zoom slider tool, you have to apply pinch gesture function to                your image.

        2.In order to perform zoom in and out function with the help of slider, you                have to move the zoom slider circle slowly from one side to the other by              holding it.

      3. Once you reached the magnification level that you want, tap on the                      iPhone screen one time to capture the image.

2x optical zoom feature on iPhone Camera

An excellent optical zoom feature has been assembled inside the     camera function of iOS smartphones like iPhone 7 and its following models-providing you better image quality and resolution with two-times zoom in feature.

   1.  Tap the Camera app on your device and point toward the picture you                    want to click.

   2. Hit on the small circle indicating the symbol “1 x”.

   3. Now hit on the “1 x” (one-time zoom circle). 

  4.  The circle will change into “2x” and the image becomes larger.

Zooming an iOS device using the slider

Just touch on the1x symbol (optical zoom) keep it     pressed to apply the zoom slider tool in new models of iPhone.

If you tap on either of the 1x or 2x sign, a     mini zoom slider tool will display at the bottom of your screen.

In order to perform the zoom in and out function, let’s move     the slider button from one side to the other.

When you move the slider button with the help of your     fingertips, you will examine that the magnification level will increase     according to the resolution of the image.

You have to mind that if you increase the zoom magnification     level above two times, it will be considered as a digital zoom.

Ava Williams is a Norton product expert and has been working in the technology industry since 2002. As a technical expert, Ava has written technical blogs, manuals, white papers, and reviews for many websites such as norton.com/setup.

Source:- Camera Zoom Feature

[readersbay]

How to Get Started with iTunes and its Catalina Analogues

Nowadays, iTunes is becoming very popular in the field of entertainment, and Apple continues to improve it. According to Apple, the music system iTunes will now be under three divisions: iPhone Music, Podcasts and the last one is iPhone TV. In iTunes, you have the power to manage your music according to your wish whereas the Catalina is the major release of macOS.

Signing iTunes 

To make a fresh iTunes account, follow these steps:

1.      First of all, go to the Login Page of Apple in your browser.

2.      Now tap to create your Apple ID.

3.      Then provide all the details like your passcode, etc.

4.      Tap on continue to proceed.

In most cases, your device will reflect a message that you have already an account if you wish to create a new Mac or Apple ID

Using Apple ID for iTunes Sign in

You may use your Apple ID to sign-in into your music account.

1.      First of all, tap the iTunes for Mac.

2.      Now select Account. Then go to your Login page located inside the menu bar situated at the upper portion of your page.

3.      Then give your important details like your ID and passcode to log in. Tap the enter key to proceed to sign in.

            From the Apple iTunes, you may manage all your account related settings like payment medium, your purchasing account, and so on.

Finding Apple Music under iTunes

To know the steps to access Apple Music, follow these steps:

1.      Firstly, log in to your iTunes store.

2.      Tap on browse. Then hit the “Apple Music.” Now tap on the “Try it Free” option. You have to select your desired subscription rental plan.

3.      Then provide your ID and passcode to proceed further.

4.      Here, certify your login details.

5.      Now choose your variants, series, and the artists according to your wish.

Creating a Music Library manually

1.      Just login to your iTunes store.

2.      Go to your desired songs that you wish to purchase and tap the “Buy Song” tab located under the price panel.

3.      Now manage your iTunes library to handle and access your favorite songs.

If you have already stored a collection of iTunes songs somewhere, you may sync it to your iTunes to collect all of the music in one place. Follow these simple steps to rewrite your music from Mac to Apple music:

§  Log in to iTunes with your Apple ID and secure password.

§  Hit the music library to expand by double-clicking on iTunes.

§  Click on choose file option, and then go to “Add to Library” located at the upper part of the page under the menu bar.

§  Then go to file/folder from which you wish to upload in your music files in cluster.

§  Now press the “Open” button.

Using macOS Catalina

§  In this version of macOS 10.15 Catalina, you are eligible to access the entire iTunes feature in a better and expandable way. 

§  Catalina will provide you with three broad categories of music, video, and of course, the Podcasts. The process of these variants is similar to iTunes.

Managing the sound function 

To feel the real 3D experience on the Mac, follow these steps:

1.      Just go to any of the music folders and play it on iTunes.

2.      Now double click the Boom 3D application to open.

3.      Then hit the 3D surround symbol.

4.      To feel the 3D effect of the song, keep listening to the song by toggling the effect button.

5.      You may drop any music in the Boom effect to listen to the virtual effect of your selected songs.

I’m John Smith. I’m a web developer living in Texas. I am a fan of design, technology, and coffee. I’m also interested in reading and food. You can read my blog on office.com/setup with a click on the button above.

Source:- Catalina Analogues

[readersbay]

How to Download and Watch Shows or Movies Offline on HBO GO

There are lots of applications that allow us to watch movies, Tv series, etc. Most people download their favorite movies and shows for later use because there is no internet accessibility in some of the areas. In case you want to save your internet data, follow these steps to stream any of the shows or movies of your choice in Offline mode on HBO Go.

Apps that enable you to watch any show or movies offline

§  PlayOn: This popular application is free to download and use, but you have to pay to enable the recording function. It only works on Windows. After the recording function is installed in it, you may record and download any of the movies and transfer them on your smartphone or tablet for streaming the video.

§  PlayOn Cloud: It works on your smart device like iOS and Android. Here you also have to pay each time you record any of the shows or movies.

Using HBO GO offline with the help of PlayOn on Windows 

1.      Go to PlayOn.com/download. Then tap on the “Free Version” option. Then hit on “Save.” Now get it installed the application when it completed downloading.

2.      When the app gets installed on your system, tap the app to open and then proceed to next after reading all the online instructions.

3.      Now go to the PlayOn Sign-in page, and the system will provide you two options- to Login with your FB account or create a new PlayOn profile account. You have to choose any of these two options.

4.      Hit on the “Channels” option.

5.      Now find and tap on the HBO Go.

6.      Press on the “Open Settings” to expand it.

7.      Under the channels, tap on the HBO Go and tap to Login. Then a new box will open asking to provide you to enter all the information related to your TV set subscriber. Tap to select your subscriber’s name under the list. Then you have to give all the details like your user ID and passcode. Then hit on the Login button.

8.      Now the HBO Go will launch under the new PlayOn web page. Here you have to authenticate that you can use the services of the HBO Go to play and view shows and movies.

8. Search any of the movies or play that you desire to view in offline mode and then tap on “Record.”

9. If you wish to transfer the recorded play or show to your iOS device, hit on the “Send to iTunes” tab. Otherwise, you have to use Windows File Explorer to transfer the file to the Android gadget.

Using HBO Go offline application with the help of PlayOn on the smartphone 

1.      Go to the app store on your computer, type PlayOn in the search bar and tap on the download button.

2.      Go to the app store or play store on your smartphone. Download PlayOn.

3.      Launch and connect the PlayOn app with the system app located on your PC.

4.      Hit on the “All” button.

5.      Now tap the HBO Go.

6.      Search your desired movie that you wish to view offline and hit on the “Record” button.

7.      When you finish recording, you may send it to your smartphone or tablet through Wi-Fi or a fast internet connection.

I’m John Smith. I’m a web developer living in Texas. I am a fan of design, technology, and coffee. I’m also interested in reading and food. You can read my blog on office.com/setup with a click on the button above.

Source:- HBO

[readersbay]

How to Open Public WiFi Login Page on Windows 10?

Among the best part of going to a restaurant or a movie hall is getting a public Wi-Fi access. But sometimes even after connecting to the Wi-Fi, the sign-in page does not get displayed. In such cases, you are not able to browse over the internet. To know how to get back the public Wi-Fi sign-in page, you need to go through this blog carefully.

Method 1: Restart the device

Firstly, you need to disconnect from the network.

Then, disable the Wi-Fi.

After that, sign-out from the user account.

Next, shut down the computer.

Then, switch on the computer.

After that, sign in to the user account.

Next, enable the Wi-Fi.

Then, connect to the network one more time.

Lastly, check if the sign-in page is now able to display in the     browser or not.

Method 2: Go for the another browser

Firstly, visit the Start menu.

Then, write ‘Control Panel’ into the search bar. Note that the     option shall get displayed as Best Match.

Press it.

After that, choose ‘Category’. It will be under the ‘View-by’ pull-down.

Next, search ‘Programs’.

Press it.

Then, press on Default Programs.

Next, press on ‘Set your default programs.’

Then, give some time for the page to load.

After that, choose the browser that you wish to use.

Next, press option that states ‘Set this program as default.’

Lastly, tap on ‘OK.’

Method 3: Resetting the Network Connection

Firstly, press the Wi-Fi symbol. It will be placed on the     left-hand side corner of the task bar.

Then, press on the Wi-Fi option to turn it off.

After that, switch on the network connection one more time.

Switch on the Wi-Fi symbol and the Wi-Fi option one more time.

Next, open your browser.

Then, try to go to ‘Google.com.’ The sign-in page will now be     displayed.

Method 4: Updating the Network Adapter Driver

Firstly, hold down the combination of Windows symbol+R on your     keyboard.

Then, write ‘devmgmt.msc’ into the text box.

After that, press on OK.

Then, move downwards to Network Adapters.

Next, press the arrow for expanding the option.

After that, right-click on the network adapter.

Then, press on the ‘Uninstall device.’ It will be situated in     the context menu.

Next, reboot the PC. The driver shall get installed by itself.

However, sometimes Windows is not able to do this on its own.     You need to return to Device Manager. Press on the Action option and     select Scan for hardware modifications. Now the installation of the driver     will begin.

Restart the PC, connect to the public Wi-Fi network, open the     browser, and check if the sign-in page is getting displayed or not.

Ava Williams is a Norton product expert and has been working in the technology industry since 2002. As a technical expert, Ava has written technical blogs, manuals, white papers, and reviews for many websites such as norton.com/setup. 

Source:- Windows 10