#DMX-Dimmer

[techniktagebuch]

Oktober bis Dezember 2024

WLAN-frei heißt nicht strahlungsfrei, und: die Tücken hundert Jahre alter Zimmerdecken

Seit Wochen tüftle ich an einer neuen Deckenleuchte für mein Zimmer, bestehend aus verschiedenfarbigen LED-Streifen.

Ich hatte kurz RGBW-Streifen ausprobiert, aber war überhaupt nicht glücklich damit. Beim Lampendesign wäre das praktisch gewesen – man muss nur einen einzigen Streifen verarbeiten. Aber ich brauche kein blaues und grünes Licht in meinem Zimmer, mich interessieren nur die warmen Farbtöne von weiß über gelb bis rot. Zudem hat mich das Gelb (gemischt aus grün und rot) überhaupt nicht überzeugt, es war irgendwie matschig und kalt. Deshalb gibt es jetzt einen weißen, einen gelben und einen roten LED-Streifen auf der Leuchte. Das braucht dreimal so viel Platz, aber mischt die erhofften warmen Farbtöne, so wie ich mir das vorgestellt habe.

An der Zimmerdecke hängt zusätzlich eine Kiste mit Netzteil und DMX-Dimmer, von der eine handgebastelte Steuerleitung zu einem DMX-Lichtpult führt, mit dem ich die Leuchtstärke der drei Farben einstellen kann, je nach Stimmung und Tageszeit.

Nachdem es unzählige funkbasierte Geräte für die Steuerung farbiger LED-Streifen gibt, erscheint die Entscheidung, sich Veranstaltungstechnik ins Zimmer zu stellen, auf den ersten Blick vielleicht etwas wunderlich. Hintergrund dieser Designentscheidung war, dass ich mit einer Reihe WLAN-Skeptiker zusammenwohne, und wir uns geeinigt haben, dass das WLAN nachts ausgeschaltet wird. Also brauchte ich eine kabelgebundene Lösung – zumindest wenn ich mir die Möglichkeit offen halten will, auch nach 23 Uhr das Licht ein- oder gar auszuschalten.

Beim Basteln lasse ich mir davon zunächst nicht die Laune verderben – kabelgebundene Lösungen genießen ja den Ruf hoher Zuverlässigkeit und Störfestigkeit, das soll mir doch recht sein. So dachte ich mir nichts Böses, als ich einen ersten Prototypen in Betrieb nehme, während ich Radio höre. Als ich das Licht zum ersten Mal aufblende, wird das Radio stumm – der Empfangspegel am DAB-Empfänger geht auf null. Licht aus – Ton wieder da. Licht an – Radio stumm. Ich vermute, dass die Pulsweitenmodulation des DMX-Dimmers ziemlich hässliche Störungen ausstrahlt. Soviel zur Robustheit kabelgebundener Lösungen, und soviel zu unserem kleinen Selbstbetrug, dass man nur das WLAN abschalten muss, um glücklich strahlungsfrei zu sein. Macht alles nix, denke ich mir zu dem Zeitpunkt – zum Schluss wird der ganze Kram an der Decke hängen und weit genug vom DAB-Empfänger entfernt sein.

Das nächste Problem ist viel profaner, fällt im weitesten Sinne aber auch unter Alltagstechnik: die Netzteil-Kiste soll an die Decke geschraubt werden. Das Haus ist gut hundert Jahre alt, Hineinbohren ist also an egal welcher Stelle ein Abenteuer. Die erste Schraube erwischt einen Balken und hält satt. Die zweite rutscht widerstandslos in einen Hohlraum. (Wobei Hohlraum nicht ganz treffend ist: der Raum zwischen den Balken wurde wohl üblicherweise mit Bauschutt aufgefüllt – das macht die Decke schwer und dämpft Schallübertragung.) Ich versuche es mit einer Schraube, die doppelt so lang ist, aber das beeindruckt den Hohlraum nicht. Erst eine dreimal so lange stößt auf Widerstand. Ich habe Hemmung, sie bis zum Anschlag einzudrehen, weil ich Sorge habe, dass sie beim Nachbarn oben aus dem Fußboden kommen wird. Schließlich wage ich es doch und habe Glück: oben keine Spur von der 18 Zentimeter langen Schraube.

Nach etwas mehr Basteln und Fluchen hängt die Lampe an der Decke und funktioniert herrlich. Nur die Auswirkungen aufs Radio sind leider die selben geblieben. Vielleicht sollte ich auf Internetradio umsteigen? Wobei, das funktioniert dann wiederum nur tagsüber, weil es ja auf WLAN angewiesen ist.

Also nehme ich einen weiteren Anlauf und kaufe einen anderen DMX-Dimmer, in der Hoffnung, dass der weniger Störungen verursacht. Dass er andere Eingangsbuchsen für das Steuersignal hat, ignoriere ich beim Kauf. Nun müsste ich allerdings am selbstgebastelten Steuerkabel einen anderen Stecker anbringen, dazu müsste ich die Steuerkiste entweder noch mal von der Decke nehmen (was ich mich nicht traue, weil ich fürchte, dass dabei eine Ladung historischen Schutts auf mich herniederkäme). Oder ich müsste – auf der Leiter stehend – über Kopf in der Kiste herumlöten. Vielleicht sollte ich besser ein anderes Radio kaufen, sicherheitshalber mit Netzwerkbuchse fürs nächtliche Internetradio. Hauptsache, die Lampe kann bleiben, wo und wie sie ist.

(Lennart Schütz)

[luckyacid]

Haroon Mirza A Dyson Sphere for Schumann Resonances (Solar Symphony 13), 2021/2022 Photovoltaic panels, aluminium profile, halogen lighting, speakers, bespoke media devices, electronics, DMX dimmer pack, psychoactive flora, LED’s, planter, water, speakers, amps, tabla, cymbals, carpets Dimensions Variable

[gproduction]

Comparing LED vs. Halogen Options in Light Equipment on Rent

When planners look for Light Equipment on Rent, the discussion inevitably turns to LED and halogen fixtures. Both technologies illuminate event spaces, film sets, fashion ramps, and corporate expos across Chennai, yet they differ in energy draw, color accuracy, fixture weight, and long‑term economics. Understanding those differences helps event professionals book the right inventory—avoiding surplus costs while delivering an unforgettable visual experience.

1. Energy Efficiency and Power Logistics

A single 100 W LED PAR can produce the same luminous output as a 500 W halogen PAR can. Because rental venues often impose power limits, shaving 80 % off consumption frees amperage for audio consoles or high‑definition LED walls. Less current also means lighter‑gauge cabling, smaller generators, and reduced diesel rentals—hidden savings that matter when you invoice clients.

From a sustainability angle, LEDs convert most of their draw into visible light, whereas halogens waste roughly 90 % as radiant heat. Green‑conscious brands increasingly ask production houses to document their carbon footprint; specifying LED fixtures for Light Equipment on Rent becomes an automatic talking point in RFPs.

2. Heat Management and Audience Comfort

Halogen filaments reach 250 °C in seconds. On a packed wedding mandapam or conference stage, that heat radiates toward performers, wilts floral décor, and hikes HVAC bills. LEDs run cool to the touch, allowing truss technicians to reposition heads even after hours of use—minimising downtime during tight turnarounds.

Cool operation is especially critical for fashion shows where models stand inches from back‑light bars, or for product launches featuring delicate cosmetics that cannot melt under focus spots. When budget and ambience both matter, LED wins the thermal debate hands‑down.

3. Color Quality and Artistic Control

Halogen’s natural warm output (≈ 3200 K) flatters skin tones and wood finishes, which explains its enduring presence in theatre. Designers often dim halogen fixtures for romantic amber washes; tungsten filaments maintain consistent color even at 40 % intensity.

LED engines, by contrast, mix discrete red, green, blue, amber, white, and UV diodes to create nearly any hue without external gels. Modern RGBAL fixtures now exceed 90 CRI, rivaling halogen on fidelity while offering instantaneous color bumps for DJ drops or award‑night stings. In rental scenarios where one rig must cover gala dinners, keynote sessions, and DJ after‑parties, LED’s versatility reduces fixture count and truck space—key metrics for Light Equipment on Rent providers.

4. Rigging Weight and Setup Speed

Halogen PAR cans are metal workhorses but tip the scales at 3 – 4 kg each, plus the bulkier dimmer racks they rely on. An equivalent LED PAR weighs 1.5 – 2 kg and runs directly from DMX‑addressable drivers. Lighter weight lessens the load on ballrooms with limited rigging points and speeds up load‑in, translating to lower labor hours—a direct benefit reflected on the client’s quote for Light Equipment on Rent.

5. Total Cost of Ownership (TCO) in Rental Context

Purchasing inventory is the rental firm’s capital expenditure; clients essentially fund depreciation through daily hire charges. A halogen lamp lasts 75–100 hours; a single three‑day conference could blow a bulb, forcing replacement stock. LED source life exceeds 25,000 hours, so rental houses spread the purchase cost across hundreds of shows, allowing competitive rental rates without margin erosion.

For the client, that translates to fewer consumable surcharges and reduced risk of mid‑show failures—a selling point every event company leverages when pitching cost‑conscious procurement teams.

6. Use‑Case Matrix: When Halogen Still Shines

Application Recommended Source Rationale Classical dance recitals Halogen Rich warm spectrum, flattering for skin and silk sarees Budget‑limited village fairs Halogen Low upfront rental price, simple dimmer control High‑end corporate galas LED Energy limits, color branding, silent operation Outdoor concerts LED Weather‑sealed IP65 fixtures, low power from gensets

Even with LED dominance, seasoned lighting designers keep halogen profiles in their design palette—for nostalgia or specific artistic warmth. The key is matching the source to the story you want the stage to tell and balancing that choice with the logistical realities of Light Equipment on Rent.

7. Emerging Trends Influencing Rental Decisions

Hybrid fixtures combining tungsten and LED chips allow designers to cross‑fade between classic warmth and saturated color looks, giving rental catalogues a flexible, one‑SKU solution.

Wireless DMX and battery‑powered uplights shrink setup times for boutique venues where cable runs are visually intrusive.

Cloud‑based fixture monitoring lets rental crews track remaining lamp hours and proactively service gear, reducing on‑site failures. Providers who adopt such tech will own the premium market for Light Equipment on Rent in 2025 and beyond.

Conclusion

Choosing between LED and halogen in Light Equipment on Rent isn’t a one‑size‑fits‑all decision; it’s a strategic balance of energy efficiency, heat output, color requirements, rigging logistics, and TCO. Savvy planners collaborate with an experienced event management company in Chennai that stocks both technologies and knows when to deploy each.

That’s where G Productions excels. With an extensive in‑house inventory of cutting‑edge LED fixtures and meticulously maintained halogen classics, the team crafts lighting landscapes that elevate concerts, weddings, and corporate spectacles alike—all while safeguarding budgets and sustainability goals. By entrusting your next show to G Productions, you gain a partner whose commitment to technical quality, creative vision, and on‑time delivery sets the benchmark for the industry.

[chronos-lights]

Top 6 Considerations Before Buying LED Strip Lights

Introduction

LED strip lights have become a popular choice for home and commercial lighting due to their versatility, energy efficiency, and vibrant illumination. However, before purchasing, it's essential to consider several factors to ensure you choose the right LED strip lights for your needs. This guide will help you understand the key aspects to consider, from brightness levels to waterproof ratings, so you can make an informed decision.

1. Where Do I Want to Place the LED Strip Lights? (Indoor or Outdoor)

The installation location determines the type of LED strip light you need. Different waterproof grades are available to suit various environments:

IP20: Non-waterproof, ideal for indoor applications like under cabinets and ceilings.

IP65: Water-resistant, suitable for areas exposed to moisture, such as bathrooms and kitchens.

IP67: Waterproof, ideal for outdoor use where the strips may be exposed to rain.

IP68: Fully submersible, perfect for pools, aquariums, and extreme weather conditions.

✅ Tip: Choose the right IP rating based on your intended usage to ensure longevity and performance.

2. How Much LED Brightness Do I Need?

Brightness is determined by LED density, lumens, and SMD LED type. The higher the lumens, the brighter the light.

LED Density: Measured in LEDs per meter, a higher density provides more uniform brightness.

Lumens: Indicates brightness. For accent lighting, 300-500 lumens per meter is sufficient, while task lighting may require 1000+ lumens per meter.

SMD LED Types:

SMD 3528: Low brightness, best for decorative lighting.

SMD 5050: Medium brightness, suitable for task lighting.

SMD 2835 & SMD 5630: High brightness, great for commercial applications.

✅ Tip: Choose the LED density and lumens based on the lighting effect you want to achieve.

3. What is the Working Voltage? (5V vs 12V vs 24V)

LED strip lights operate at different voltages, and selecting the right one prevents voltage drops and enhances efficiency.

5V LED Strips: Suitable for short runs and USB-powered devices.

12V LED Strips: Most commonly used for home and vehicle applications.

24V LED Strips: Best for long runs to reduce voltage drop and power loss.

AC vs DC: Most LED strips use DC power, requiring an adapter if connected to an AC source.

✅ Tip: Consider your power source and project requirements before selecting a voltage.

4. What is the Ideal LED Strip Length for My Project?

Understanding the required strip length ensures adequate coverage and reduces wastage.

Standard lengths range from 1 meter to 10 meters per roll.

Voltage drop occurs in longer strips, affecting brightness at the far end.

Customizable strips can be cut at specific intervals (every 3 to 6 LEDs).

✅ Tip: Measure your installation area before purchasing to ensure the correct strip length.

5. Do I Need an LED Light Controller?

LED controllers allow users to adjust colors, brightness, and lighting effects. Depending on your preference, different types of controllers are available:

Manual Controllers: Simple dimmers to control brightness.

Remote Controllers: Wireless options for ease of use.

Smart Controllers: App-controlled via Wi-Fi or Bluetooth, compatible with Alexa and Google Home.

DMX Controllers: Used for professional lighting setups.

✅ Tip: Choose a controller based on your desired functionality and ease of use.

6. How to Power LED Strip Lights?

A proper power supply unit (PSU) ensures stable operation and prevents damage.

Match Voltage & Amperage: Ensure the power supply voltage matches the LED strip voltage (e.g., a 12V strip needs a 12V PSU).

Consider Wattage: Calculate the total power consumption to select the right power adapter.

Dimmable Power Supplies: Allow dimming control for adjustable brightness.

Plug & Play vs Hardwired: Plug-in adapters are easy for DIY projects, while hardwired setups offer a clean look for permanent installations.

✅ Tip: Always use a power supply with at least 20% higher capacity than the LED strip’s total wattage for safety and efficiency.

Before purchasing LED strip lights, evaluating these six factors will help you find the perfect fit for your project. Whether you're decorating your home, upgrading office lighting, or enhancing outdoor spaces, choosing the right brightness, voltage, and waterproof rating ensures long-lasting and energy-efficient lighting.

🔗 Looking for the Best LED Strip Lights in India in 2025? Visit Chronos Lights to explore a wide range of high-quality LED strip lights tailored to your needs.

🌟 Enhance your space with premium LED lighting today! 🌟

[possessed-paranoia]

Patch all DMX channels as dimmers, explore the processes through touch. Get her twitching when you trigger a function that was never meant to be on a fader.

i don’t think the possibilities of connecting a robot girl to an ETC lighting board have been fully explored

[webionaire]

little bit of history first. DMX is a digital system that was devised in the 1980s. Previous systems were analog. The most common method of control was a 0 to 10-volt control line that was connected via cinch-jones connectors. Every dimmer had its own 0 to 10-volt line, so if you had 42 dimmers, you would have 42 conductors plus commons from the console to the dimmer room. The conductors were usually bundled in groups of six. It would take 7 control cables to control the 42 dimmers mentioned above.

[deiling-chan-blog]

Now, through this way, can you understand our SS - Sine System Contact Deiling via deiling@fullwintech.com, or skype "deiling8.13", welcome questions or cooperations! #LED #dimmer #dimmable #Triac #10V #Dali #DMX #linevoltage #linear #upgrade #retrofit #T8 #cornbulb #highbay #panel #flicker #CCT #T5 #downlight #energy https://www.instagram.com/chendaiwan/p/BwycjZyhoIW/?utm_source=ig_tumblr_share&igshid=h3imjhe72elw

[spelight]

7pcs 40W LED Zoom Moving Head Light

This is a high powerful LED Moving Head Zoom Light with 7pcs 40W LED, the zoom range can from 10degree to 60degree. It can be a beam light, and a moving head wash light. This light has two version, non-pixel control and pixel control version. Clients can choose as you like. The light is very suitable for the stage performance, theatre, TV, studio, rental and other entertainment places.

 Features of 7pcs 40W LED Zoom Moving Head Light

Extremely small, fast and powerful LED Moving Head Beam Zoom Light;

Wide zoom range from 10degree to 60degree;

Great built-in lighting shows programs under master/slave mode;

Blue LCD display for easy navigation;

Pixel control with bee-eye effects;

Perfect for stage, theatre, TV, studio, rental and discotheques.

 Technical Information of 7pcs 40W LED Zoom Moving Head Light

Voltage(V)

AC110V-240V 50/60Hz

Light source

7pcs 40W RGBW 4in1 LEDs

Power consumption

350W

Channel mode

12/17 DMX channels

CRI (Ra>)

85

Control Mode

DMX512, Master-slave, auto run, sound

Strobe

1-25 Hz

Dimming system

0-100% linear dimmer with 16 bit

Pan

540 degrees

Tilt

270 degrees

Beam Angle

8-58°

Effect

Zoom+beam+wash

Color temperature

RGBW 4IN1

Display

LCD display

Working environment

-20℃~40℃

Housing Material

ABS

IP Grade

IP20

Net Weight

9KG

Dimension

240mm*300mm*405mm

Functions

the dyeing effect,strobe,zoom, the beam light effect

 https://www.spelight.com/products/7pcs-40w-led-zoom-moving-head-light.html

[mentaltimetraveller]

Philippe Parreno Marquee, 2019 Plexiglass, dimmers, neons, bulbs, DMX player, cable, 81 x 178.8 x 83.8 cm

[ledlightstrips4-blog]

Selecting the Right LED Strip Light?

led light strips

Led strip lights lights, ribbons or heurt have become one of the most popular DIRECTED products available on the market. They did not simply replace incandescent ribbons, quite possibly of the fluorescent tubes at the same time, and definitely gave endless selections for advertisements and decoration involving bars, hotels, and other open public places. With the fast progress the LED technology, vehicle available in very bright types too, allowing users to make use of it as task, or in very unlikely cases, even as a main cause of lighting. Their application is actually popular both in home along with commercial use, therefore we obtained the main characteristics of tape lights consumers need to look at if they want to make the right choice.

led light strips

Dependant upon our purposes the following characteristics may help us decide whatever you have to apply.

- The size and style or type of LED integrated - the number of LEDs in a metre of the strip -- the colours or color temperature of the LEDs : the flexibility of the strip rapid the direction of LEDs on the strip - transporting capacity - heavy duty instructions IP rating - Brouille - dimmers and remotes

Of all the determining factors stated previously, the most important is probably the type in addition to size of the LED incorporated, both of which determine their brightness or performance. This kind of difference has already been discussed a single of our previous articles about ArticleBase. com: how the functionality of different LED technologies (low power, SMD power as well as high power) ranges, plus the size of the diodes. Naturally, the more recent the engineering of the LED is, and also the bigger its size is, typically the brighter it will be.

Another deciding factor of the performance will be of course the number of LEDs from the strip within a metre as an illustration. The higher this number is usually, the brighter the reel is, though extremely excessive numbers within a metre generally require special technologies, such as double width strips -- where the LED are placed not simply one after the other in two or three rows next to the other. With strips including a lot of LED always check their very own arrangement, because LEDs located too close to each other may produce too much heat and drastically shorten the lifespan from the strip.

The colour range of often the LED is now endless, considering that any colour can be containing RGB technique. There are normally two or three shades of white offered: bright or cold bright - the bluish, genuinely bright version of light, the warm white : which is rather yellowish such as sun, and the natural white-colored - which is a combination of both the in various degrees. The temp of the white colour is definitely measured in Kelvin, as well as the higher colour temperatures (from about 5000 K) would be the cold, or bluish white wines and the lower ones (2700 - 3000 K) will be the warmer white colours.

One colour LEDs are available in virtually all colours now, but the RGB LED strips can also give off a large variety of colours. RGB strips need a controller to, and decide whether the coloring of the strip should be a single constant colour, or need to change along with setting the actual pace of change. Particular pixel RGB strips can easily change the colour in a short period, creating a run-down effect. The wide range of colour changes of the RGB strip largely depends on the ability of the controller too.

The flexibleness of the LED strips might be a determining factor in their software. Rigid strips are perfect for updating fluorescent tubes for instance, however there is hardly anything you would be unable to do with a flexible remove either. On flat surface types it is sometimes easier to help with rigid strips, though put on ceilings or walls rapid I guess many of you have discover this problem before - precisely what appears to be flat for the eyesight is far from straight after examined with a spirit levels. So , flexibility is more normally a grace than a burden. Strip are usually flexible to one way of measuring only, which is exactly this lady the direction of the LEDs can be significant. The most common varieties of strips have LEDs lights upwards, so if for instance if you want to enlighten a wheel you will need to look for side-mounted or side-view strips to be able to shape these people the right direction.

The holding capacity of strips is mostly very low. Heavy-duty strip signals are not usually sold with regard to home use, but much quite for commercial use on cruises and in factories for instance. Throughout home use, where carrying ability matters - on an border of a stair for instance instructions the use of profiles is the popular solution.

The IP status of strips or any electrical goods is made up of two quantities, indicating the degree of protection presented against the intrusion of sturdy objects (including body parts just like hands and fingers), airborne dirt and dust, accidental contact, and drinking water in electrical enclosures.

Purchasing to install strip lights with wet or humid spots, outdoors, or maybe even under h2o, then your items need to be in part or completely waterproof. completely waterproof items have the IP rating of 68.

Typically the Voltage of LED strip equipment and lighting should always be checked before program. Strips running at dextre are often used, but most in the LED strips require a transformer, since they run at very low voltage (usually 12 or maybe 24 V). If your strip need a transformer, make sure its suitable for LEDs, because electric powered transformers most of the time ruin LEDs.

The variety of moods or atmospheres that can be created with strip lamps is incredibly large and a lot is determined by the accessories you use using them, like dimmers or remotes. Although the largest variety of RGB effects are created with energy, where there is no limit on the effects used other than each of our imagination, there is a lot you can perform with strips too, making use of complex controllers, like the DMX, allowing you to set the flow of colour change to tunes. Dimming is always simply obtainable, though most strips call for a dimmer specifically manufactured regarding LEDs.

[ledstripiron-blog]

The way to select the Right LED Reel Light?

led strip soldering machine Led strip lights lights, wide lace or heurts have turn into one of the almost all popular ENCOURAGED products offered on the market. Many people did but not only replace amoureux ribbons, while some other people of often the fluorescent tubes likewise, along with definitely gave endless ways for advertisements and decoration associated with bars, hotels, and different open places. With the actual fast progress the BROUGHT technology, automobile available within very bright variants way too, allowing users to put on the idea as task, or in very unlikely cases, even as a new main method to obtain lighting. All their application is actually popular equally in home in addition to professional use, therefore we compiled the main characteristics regarding deprive lights consumers have to have to think of if many people want to make the particular right choice.

led strip soldering machine

Determined by each of our purposes the following attributes may help us consider anything you have to employ.

- The type or variety of LED bundled instructions the number of LEDs with a metre of typically the strip -- the shades or color temperature involving the LEDs : often the flexibility of the tape rapid the direction connected with LEDs on the reel - holding capacity instructions heavy duty -- IP rating - Discorde : dimmers and remotes

Connected with all the determining components already stated, the most critical is probably the style as well as size of the actual LED provided, both associated with which determine it has the purity or performance. That change has already been talked over within a of our preceding articles in ArticleBase. com: how the effectiveness regarding different LED technologies (low power, SMD power and also high power) ranges, in addition to the size of the diodes. Definitely, the more new the technological know-how of the particular LED is, plus the much larger its size is, typically the brighter it will become.

Another deciding factor involving the performance will be connected with course the number associated with LEDs inside strip inside of a metre in particular. The particular higher this number is usually, the brighter the remove is, though extremely substantial numbers within a metre typically require special engineering, just like double width pieces rapid where the GUIDED are placed besides a single after the other playing with two or three series next to 1 another. Having strips including a variety of LED always look at all their arrangement, because LEDs inserted too close for you to each other may discharge too much heat along with sufficiently shorten the life expectancy on the strip.

The coloring range of often the DIRECTED is now endless, due to the fact any colour can end up being including RGB technique. At this time there are commonly two or perhaps three shades of light readily available: bright or wintry white-colored - the bluish, definitely bright version regarding whitened, the warm bright instructions which is quite yellowish much like the sun, in addition to the natural light -- which is a collaboration of the 2 main in a variety of degrees. The heat range involving the white colour is definitely measured in Kelvin, along with the higher colour temperatures (from about 5000 K) are definitely the cold, or bluish white cloths and the lower people (2700 - 3000 K) are classified as the warmer white colorings.

Sole colour LEDs are generally available in most tones now, but the RGB LED strips can in addition release a large wide variety of colours. RGB whitening strips need a controller to run, and decide whether the actual shade of the deprive should be just one continual colour, or need to adjust along with setting the particular pace of change. Exclusive pixel RGB strips will be able to change the colour inside a line, creating the run-down effect. All the different colouring changes of the RGB strip largely depends about advantage of the controlled too.

The prospects of typically the LED strips may be a finding out factor in their app. Rigid strips are great for swapping fluorescent cylindre for instance, however at this time there is hardly anything anyone would be unable to do having a flexible tape often. On flat materials the item is sometimes easier to help consult with rigid strips, nevertheless applied to ceilings or partitions : I guess quite a few of you have find this problem before rapid what exactly appears to always be flat for the vision is far from immediately the moment examined with any spirit amount. So, mobility is more ordinarily a style than a burden. Tape are usually flexible in order to one age only, which will is exactly the woman often the direction of the LEDs can be significant. Typically the most common sorts of strip have LEDs light in place, so if for case in order to enlighten a controls you should look for side-mounted or side-view strips to be able to be able to design these individuals the right course.

The having capacity connected with strips is often very very low. Heavy-duty strip lighting usually are not usually sold intended for home use, but considerably relatively for commercial employ on cruise ships and throughout factories for instance. With home use, where taking volume matters - with an borders of some sort of stair for instance instructions the use of dating profiles is the widespread alternative.

The IP standing associated with strips or any power goods is made right up of two statistics, articulating the degree of safeguard given against the breach of privacy of sound objects (including body parts similar to hands and fingers and fingers), airborne debris, animal contact, and normal water with electrical enclosures.

When you plan for you to install strip lights from wet or humid sites, outdoors, or maybe perhaps under waters, then your personal items need to possibly be moderately or completely watertight. 100 % waterproof items include the IP rating regarding 68.

Often the Voltage involving LED strip signals really should always be checked previous to plan. Strips running with droits are often employed, but most with the ENCOURAGED strips require a transformer, since they run on minimal voltage (usually 14 or maybe 24 V). In the event your tape need a new transformer, make sure it can be suitable for LEDs, mainly because electric power transformers most connected with the time ruin LEDs.

The variety of feelings or atmospheres that can certainly be created with reel equipment and lighting is incredibly substantial and a lot is dependent upon the accessories you work with along with them, like dimmers as well as remotes. Although the major variety of RGB side effects are created with individual panels, where there is not any limit into the effects made use of other than all of our thoughts, there is a ton you can apply with strips far too, utilizing complex controllers, including the DMX, allowing you actually to set the groove of colour change to help new music. Dimming is generally simply plausible, though nearly all strips have to have a dimmer specially manufactured to get LEDs.

[roundeddown]

Ooooh oooooooooh! This lighting specialist gets to teach people of variable beginner level technical skill how to set up lights and program consoles and understand dimmers and power and DMX! Already they’re asking for explanations of systems I don’t entirely know (like HOG consoles) but I’m a clever boy. I can figure that out I think. Also, I feel HOG systems are ambitious, since these folk are literally starting from “my job is to point a light at a thing and plug it into a wall”, so I’ve got that going for me.

[hollysolar]

Understanding the 8x4x1 LED Brick: A Comprehensive Guide

LED bricks are a popular choice for lighting projects, and the 8x4x1 LED brick is no exception. These bricks are versatile, energy-efficient, and easy to use, making them a great option for a wide range of applications. In this article, we will take a closer look at the 8x4x1 LED brick, including its features, benefits, and potential uses.

First, let's start with the basics. The 8x4x1 LED brick is a rectangular-shaped brick that measures 8 inches in length, 4 inches in width, and 1 inch in height. It is made up of 64 individual LED lights, which are arranged in an 8x8 grid. The LED lights are powered by a low-voltage DC power supply and can be controlled with a variety of different controllers, including microcontrollers, dimmers, and DMX controllers.

One of the biggest benefits of the 8x4x1 LED brick is its energy efficiency. LED lights use significantly less power than traditional incandescent or halogen lights, which means they can help to save money on energy costs. In addition, LED lights have a much longer lifespan than other types of lights, which means they will need to be replaced less frequently.

Another benefit of the 8x4x1 LED brick is its versatility. These bricks can be used in a wide range of applications, including architectural lighting, stage lighting, and even automotive lighting. They can be used to create a variety of different effects, including chasing, strobing, and colour changing. This makes them a great option for both professional and DIY projects.

The 8x4x1 LED brick also offers a high level of control and flexibility. The individual LED lights can be controlled separately, allowing for a wide range of different effects and patterns to be created. This can be done with a variety of different controllers, including microcontrollers, dimmers, and DMX controllers.

One potential use for the 8x4x1 LED brick is in architectural lighting. These bricks can be used to create a variety of different effects, including up-lighting, down-lighting, and accent lighting. They can be used to highlight architectural features or to create a warm, inviting atmosphere in a space. In addition, the bricks can be cut and shaped to fit into tight spaces or to follow the contours of a building.

Another potential use for the 8x4x1 LED brick is in stage lighting. These bricks can be used to create a variety of different effects, including chasing, strobing, and color changing. They can be used to create a warm, inviting atmosphere on stage or to create a sense of movement and energy.

In addition, the 8x4x1 LED brick can be used in automotive lighting. The bricks can be used to create a variety of different effects, including chasing, strobing, and color changing. They can be used to create a custom look for a vehicle or to add an extra level of safety by improving visibility.

In conclusion, the 8x4x1 LED brick is a versatile, energy-efficient, and easy-to-use lighting option that can be used in a wide range of applications. Whether you're a professional lighting designer or a DIY enthusiast, these bricks offer a high level of control and flexibility, making them a great option for creating a wide range of different effects and patterns.

[trongnghianguyenamazon]

Ridgeyard 4 PCS RBG Moving Head Light Beam Lights 16CH DMX DJ Light Stage Party Disco Club Spot Lighting (4pcs)

Ridgeyard 4 PCS RBG Moving Head Light Beam Lights 16CH DMX DJ Light Stage Party Disco Club Spot Lighting (4pcs)

LCD touch screen for easy setting the lamp; Long working life, excellent stability 530 degree free rotating on pan, 270 degree rotating on tilt;Smooth dimmer from 0-100% Build-in double wheel: 1 gobo wheel provides 17 gobos, 1 color wheel provides 14 color filters + white Working mode: DMX512, Master-slave mode, Sound activated mode, Sync, Stand-alone mode, Auto mode. 230w moving head stage…

[leelightingrental]

24x5kW Dimmer Art 2000 DMX 3phase P/Lock

24x5kW Dimmer Art 2000 DMX 3phase P/Lock

[rimigrateur]

Touchdesigner LightSystem(Edison lamp)

I will introduce the production process of the light bulb light system made with TouchDesigner.

Band Name: seasunsalt(Japan)

https://youtu.be/aidJ6zh5eYs

<Equipment used>

★AMERICAN DJ / DP415R Stage dimmer SoundHouse https://www.soundhouse.co.jp/products/detail/item/252223/ → There are many production examples such as moving, but I bought this because it was necessary to take the light bulb from the outlet and convert it.

Usage reference URL▼ https://www.youtube.com/watch?v=n8vCnjgS11E&t=694s

★ENTTEC DMX USB PRO PC-DMX controller 70304 https://www.akaricenter.com/tokusyu/mirror_ball/enttec/dmx-usb-pro.htm

★Converter CLASSIC PRO / AXX235 https://www.soundhouse.co.jp/products/detail/item/24913/

*Be careful not to mistake the male/female of 5-pin and 3-pin.

★ 26 light bulbs, 7 bases Purchased at IKEA, Industrial Works, etc.

It is necessary to adjust the value according to the wattage on the TouchDesigner side

<Wiring diagram>

<Aside> ultraDMX Micro is out of stock New product will be released around November 2022? https://dmx.lasens.com/products-4/

Reference article▼

(1) DMX control moving headlights with TouchDesigner https://qiita.com/komakinex/items/84f4d4c32fd7d62416d1

② Control lighting https://note.bassdrum.org/n/nca016174d029

③ Control the moving head https://note.com/toyoshimorioka/n/nc47500508a13

④ How to operate Touchdesigner lighting DMX light https://www.youtube.com/watch?v=dRVSUQwlqdU&t=85s