#Intake Manifolds Market Share

[credenceresearchdotblog]

The global demand for Adipic Acid market was valued at USD 7984.2 Million in 2023 and is expected to reach USD 12927.1 Million in 2032, growing at a CAGR of 5.50% between 2024 and 2032.Adipic acid, a white crystalline powder, is primarily used as a monomer in the production of nylon 6,6, a key component in the textile and automotive industries. With its wide-ranging applications in various sectors, the adipic acid market has experienced significant growth over the past few decades. This article delves into the current state of the adipic acid market, its growth drivers, challenges, and future prospects.

Browse the full report at https://www.credenceresearch.com/report/adipic-acid-market

Market Overview

The global adipic acid market was valued at approximately USD 5 billion in 2023 and is projected to grow at a compound annual growth rate (CAGR) of 4.5% from 2024 to 2030. This growth can be attributed to the increasing demand for nylon 6,6, the expansion of the automotive and textile industries, and the rising emphasis on sustainability.

Key Drivers

1. Automotive Industry Growth: Nylon 6,6, derived from adipic acid, is extensively used in the automotive industry for manufacturing various components such as air intake manifolds, engine covers, and radiator end tanks. The lightweight and durable nature of nylon 6,6 makes it a preferred material, driving the demand for adipic acid. The global shift towards electric vehicles (EVs) further fuels this demand, as EVs require lightweight materials to enhance energy efficiency.

2. Textile Industry Expansion: Nylon 6,6 is also a crucial material in the textile industry, used in the production of carpets, apparels, and industrial yarns. The increasing consumer demand for high-performance textiles and the growth of the fashion industry are significant factors propelling the adipic acid market.

3. Sustainability and Green Chemistry: There is a growing emphasis on sustainability and reducing carbon footprints across industries. The adipic acid market is witnessing innovations in bio-based production methods, which utilize renewable raw materials instead of traditional petrochemical sources. These environmentally friendly processes are gaining traction, aligning with global sustainability goals and attracting investments.

Challenges

Despite its promising growth, the adipic acid market faces several challenges:

1. Volatile Raw Material Prices: Adipic acid production relies heavily on petrochemical derivatives such as cyclohexane. Fluctuations in crude oil prices directly impact the cost of raw materials, affecting the overall production cost and market stability.

2. Environmental Concerns: Traditional adipic acid production methods involve the use of nitric acid, leading to the emission of nitrous oxide, a potent greenhouse gas. Stricter environmental regulations and the need to reduce greenhouse gas emissions pose significant challenges to conventional production processes. Companies are investing in research and development to discover more sustainable and eco-friendly production methods.

3. Competition from Alternatives: The development of alternative materials, such as bio-based polyamides and other synthetic fibers, poses a threat to the adipic acid market. These alternatives offer similar properties and, in some cases, better performance, leading to a potential shift in market dynamics.

Regional Insights

The Asia-Pacific region dominates the adipic acid market, accounting for the largest share in 2023. The region's rapid industrialization, expanding automotive and textile sectors, and growing population contribute to this dominance. China, in particular, is a major consumer and producer of adipic acid, driven by its robust manufacturing capabilities and increasing demand for high-performance materials.

North America and Europe also hold significant market shares, with well-established automotive and textile industries. The focus on sustainable production methods and stringent environmental regulations in these regions further drive innovation and market growth.

Future Prospects

The future of the adipic acid market looks promising, with several trends shaping its trajectory:

1. Bio-based Production Methods: Continued advancements in bio-based adipic acid production methods are expected to reduce the environmental impact and enhance sustainability. These methods leverage renewable resources and offer a greener alternative to traditional processes.

2. Technological Innovations: Ongoing research and development efforts are focused on improving production efficiency, reducing costs, and discovering novel applications for adipic acid. Innovations in catalyst technologies and process optimization are likely to drive future growth.

3. Rising Demand for High-Performance Materials: The increasing demand for lightweight, durable, and high-performance materials in various industries, including automotive, textiles, and electronics, will continue to propel the adipic acid market. The shift towards electric vehicles and sustainable practices will further augment this demand.

Key Players

Ascend Performance Materials

Asahi Kasei Corporation

BASF SE

INVISTA

LANXESS

Liaoyang Tianhua Chemical Co., Ltd

Radici Partecipazioni S.p.A.

Solvay

Sumitomo Chemical Co., Ltd.

DOMO Chemicals

Segmentation by Application

In 2023, the nylon production, six fiber application segment dominated the market, accounting for 53.1% of the total revenue. Its significant market share is driven by the expanding use of nylon 6, 6 as a metal alternative in automotive, electrical, and electronic devices, among other things. Nylon 6,6 fiber is also commonly used in technical components such as gears, nuts, bolts, bearings, powder tool casings, rivets and wheels, and rocker box covers. The properties of nylon 6,6 fiber, such as moisture and mildew resistance, high melting temperature, outstanding durability, and improved strength, are predicted to push its employment in a variety of applications in the coming years.

Polyurethane Production also has a consistent growth potential due to its use in a variety of end-use industries.

Segmentation by End-Use Industry

The automotive segment dominated the market over the projection period. The automotive industry mostly uses nylon 66, which is manufactured from adipic acid, due to its superior mechanical, temperature-resistant, and lightweight properties. Adipic acid is commonly used as a monomer in the production of polyamide 6.6 pellets and other polyamides or polymers for engineering plastics, as well as polyurethane for flexible and semi-rigid foam.

However, the food and beverage industry sector has gained significant market share.

Segmentation by Form

The powder form of Adipic Acid is in high demand in the market. Adipic acid powder is widely utilized in a variety of industries, including textiles, automobiles, and food. It is preferred for its portability, storage, and transportation. The powder form enables exact dosing, making it suited for a variety of applications. In addition, the powder form is more stable and has a longer shelf life than the liquid version.

Segmentation by Purity

Food Grade is the fastest-growing section of the Adipic Acid Market. Adipic Acid is becoming increasingly popular in the food business due to its numerous possibilities as a food ingredient. In food and beverage items, adipic acid is used to regulate acidity and increase flavor.

Segmentation by Production Process

Cyclohexane held the largest market share in 2023. Almost all commercial adipic acid is made from cyclohexane. It is commonly utilized as an intermediate chemical in a variety of processes, with around 54% of its output used to produce adipic acid for nylon-66.

However, cyclohexanone is expected to increase at the fastest CAGR of 8.5% throughout the projection period.

Segmentation by Region

North America dominated the global industry in 2023, accounting for more than 32.9% of total revenue

Asia Pacific is predicted to be the fastest-growing regional market

The rest of the world, including Latin America, the Middle East, and Africa, supplies the remaining demand for Adipic Acid.

Browse the full report at https://www.credenceresearch.com/report/adipic-acid-market

About Us:

Credence Research is committed to employee well-being and productivity. Following the COVID-19 pandemic, we have implemented a permanent work-from-home policy for all employees.

Contact:

Credence Research

Please contact us at +91 6232 49 3207

Email: sales@credenceresearch.com

Website: www.credenceresearch.com

[vividracing]

New Post has been published on https://www.vividracing.com/blog/top-5-best-upgrades-for-the-honda-k24a2-motor/

Top 5 Best Upgrades for the Honda K24A2 Motor

            View this post on Instagram

                        A post shared by Vivid Racing (@vividracing)

What is a K24A2 Engine?

The Honda K24A2 is a naturally aspirated engine that is a versatile powerhouse. Known for its performance and reliability, all while producing a pungent and linear 205 HP. The K24A2 has become a transplant favorite among enthusiasts for its potential in both its N/A stock and modified forms. Its robust design and impressive power output make it an excellent platform for performance upgrades. In this blog, we will explore the top 5 best upgrades to take your K24A2 to the next level. While it would make for a much longer blog, let us know in the comments of either this blog or the Instagram video if we should do a boosted version of the K24A2!

What cars came with the K24A2?

This Honda engine was featured prominently in vehicles like the state-side, first-generation Acura TSX (2004-2008) and in the JDM market, the Honda Odyssey Absolute (2002 – 2008), and the Honda Accord Type-S (2002 – 2008). Now, many car enthusiasts are replacing their B and D series Honda engines with the K24A2, as it is an affordable and reliable, high-performance engine.

How much power does a K24A2 make?

The K24A2 stock makes a pungent and linear 204 HP. This is quickly exponential with the mods we are going to unpack below.

The Best Mods For The K24A2

1. Camshafts

Upgrading the camshafts is one of the most effective ways to increase the performance of your K24A2. Enhanced camshafts allow for greater valve lift and duration, improving airflow and combustion efficiency. Two top options in the market are the Skunk2 Ultra BMF Camshafts and the Brian Crower Stage 2 Camshafts.

Skunk2 Ultra BMF Camshafts

Brian Crower Stage 2 Camshafts

2. Intake Manifold

A performance intake manifold can significantly enhance the breathing capability of your K24A2 engine. This leads to improved power and torque throughout the RPM range. The Skunk2 Ultra Race Centerfeed Intake Manifold and the Toda Racing Performance Ported RRC Civic Type-R Intake Manifold are among the best options available.

Skunk2 Ultra Race Centerfeed Intake Manifold

Toda Racing Performance Ported RRC Civic Type-R Intake Manifold

3. Fuel Injectors

Upgraded fuel injectors are crucial for delivering the right amount of fuel to match increased air intake from other modifications. DeatschWerks and Grams Performance offer some of the best fuel injectors for the K24A2 engine.

DeatschWerks Honda K-Series Fuel Rails

Grams Performance 750cc Fuel Injector Kit

4. Cold Air Intake

A cold air intake system helps to draw cooler air into the engine, which is denser and can result in more power. Two of the best options for the K24A2 are from DC Sports and Injen.

DC Sports Cold Air Intake System

Injen Cold Air Intake System

5. Exhaust Kit

An upgraded exhaust system can free up horsepower by reducing backpressure and improving exhaust flow. J’s Racing and Toda offer excellent exhaust kits for the K24A2.

J’s Racing R304 SUS Exhaust

Toda Exhaust Manifold CL9/CM2

These upgrades not only enhance the performance of your K24A2 engine but also improve its efficiency and longevity. Whether you’re aiming for a street build or a track monster, these modifications provide a solid foundation for your project. Make sure to visit Vivid Racing to get the best deals on these top-quality parts.

Let us help!

There is no doubt these are some of the best parts for your K24 build. As always, if you have any questions regarding upgrades for your JDM or these parts specifically, we are enthusiasts who have genuinely believed in supplying fellow enthusiasts since 2001 with the best mods to meet your driving goals! We have almost 12,000 5-star reviews and a 4.6/5 review on Google to prove it 😏 You can chat with us – HERE (Live Chat). We’ll get back to you like, spooky fast. Reach out to us at sales@vividracing.com or give us a call at (480) 966-3040 📞 and we’ll be happy to help with your questions or be a shoulder to cry on.

[themarketinsights]

Automotive Intake Manifold Market Will Hit Big Revenues In Future | Biggest Opportunity Of 2023

Latest released the research study on Global Automotive Intake Manifold Market, offers a detailed overview of the factors influencing the global business scope. Automotive Intake Manifold Market research report shows the latest market insights, current situation analysis with upcoming trends and breakdown of the products and services. The report provides key statistics on the market status, size, share, growth factors of the Automotive Intake Manifold The study covers emerging player’s data, including: competitive landscape, sales, revenue and global market share of top manufacturers are Magneti Marelli S.p.A. (Italy), Holley Performance Products (United States), Keihin North America, Inc. (United States), Mahle GmbH. (Germany), Edelbrock L.L.C. (United States), Röchling Group (Germany), Sogefi S.p.A. (Italy), Aisin Seiki Co., Ltd. (Japan)

Free Sample Report + All Related Graphs & Charts @: https://www.advancemarketanalytics.com/sample-report/22331-global-automotive-intake-manifold-market-1?utm_source=Organic&utm_medium=Vinay

The automotive intake manifold is the part of an engine that supplies the fuel/air mixture to the cylinders. The design of these components varies according to its application, but they all perform the same function and they all have a single input and multiple outputs. The rapid rise in vehicle production across the globe is projected to augment the demand for automotive intake manifolds in the coming years.

Thanks for reading this article; you can also get individual chapter wise section or region wise report version like North America, Europe or Southeast Asia.

[foodandbeveragesupdates]

Polypropylene Market Size & Share, Future Growth, Trends Evaluation, Demands, Regional Analysis and Forecast to 2028, Fortune Business Insights

The global polypropylene market size is projected to reach USD 108.57 billion by 2028, exhibiting a CAGR of 5.2% during the forecast period. As per the report by Fortune Business Insights™, titled “Polypropylene Market, 2021-2028”, the market size was USD 75.12 billion in 2020 and is estimated to hit USD 76.00 billion in 2021.

Advancements in Plastic Recycling Technologies to Create New Growth Opportunities

Plastic pollution has become a scourge of development for the planet. Now, chemical industry companies, with support from governments and international bodies, are taking concerted steps to tackle this problem head-on using advanced recycling technologies. For example, in April 2021, INEOS bagged the ISCC Plus award from the International Sustainability & Carbon Certification organization for its successful commercial-scale trials of next-generation recycling technology to produce polypropylene (PP), high-density polyethylene (HDPE), propylene, and ethylene. In the same month, the US Polypropylene Recycling Coalition, a cross-industry collaboration, sanctioned USD 1 million to three facilities to augment the recovery of PP in the US. Thus, growing recognition and improving funding for the plastic circular economy will play a vital role in the development of this market.

Driving Factor

Integration of PP in Electric Vehicles to Catalyze MarketGrowth

With vehicle pollution at an all-time high in major economies, the adoption of electric vehicles (EVs) is surging worldwide. For example, in 2019, global electric car sales reached 2.1 million, according to data released by the International Energy Agency (IEA). The key to enhancing the energy efficiency of EVs is to reduce their weight by employing lightweight materials in the manufacturing of their components. Polypropylene, which is a thermoplastic, is perfectly suited to meet this goal, primarily because it has low density. As a result, many EV makers are actively integrating PP in their products to make them more energy-efficient. For example, the Skoda Scala features 10% low-talc PP from Borealis, which has been used to make the car’s center console, glove box, and instrument panel. Similarly, Renault’s B4D engine leverages a PP compound for the air intake manifold, weighing 15% lesser than manifolds made from traditional polyamide-based materials. In sum, the incorporation of PP-based materials in EVs is the new thriving trend in the plastics industry, which is propelling the market.

Regional Insights

Promising Growth of the Packaging Industry to Aid the Asia Pacific Market

Supported by the spectacular growth of the packaging industry, Asia Pacific is set to dominate the polypropylene market share during the forecast period. The progress of the packaging industry in this region is driven by rapid urbanization in India and China, where packaged foods, beverages, and consumer goods are in high demand. The region’s market size stood at USD 39.95 billionin 2020.

Information source:

[ellinapark]

Natural Gas Internal Combustion Engine Outlook: World Approaching Demand & Growth Prospect 2023-2028

Global Natural Gas Internal Combustion Engine Market Report from AMA Research highlights deep analysis on market characteristics, sizing, estimates and growth by segmentation, regional breakdowns & country along with competitive landscape, players market shares, and strategies that are key in the market. The exploration provides a 360° view and insights, highlighting major outcomes of the industry. These insights help the business decision-makers to formulate better business plans and make informed decisions to improved profitability. In addition, the study helps venture or private players in understanding the companies in more detail to make better informed decisions. Major Players in This Report Include:

Caterpillar (United States)

Mitsubishi Heavy Industries (Japan)

Cummins (United States)

Daimler AG (Germany)

Deutz (Germany)

Yanmar Company (Japan)

Rolls-royce (United Kingdom)

Hyundai (South Korea)

Agcopower (Finland)

Ashok Leyland (India)

Shanghai Diesel (China)

Compressed natural gas vehicles operate much like gasoline-powered vehicles with spark-ignited internal combustion engines. The engine functions the same way as a gasoline engine. Natural gas is stored in a fuel tank, or cylinder, typically at the back of the vehicle. A CNG fuel system transfers high-pressure natural gas from the fuel tank to the engine’s intake manifold or combustion chamber. The pressure is then reduced to a level compatible with the engine fuel injection system, and the fuel is introduced into the intake manifold or combustion chamber, where it is mixed with air. The fuel-air mixture is then compressed and ignited by a spark plug. Market Drivers The Exponential Growth in Automotive Industry Worldwide

The Rising Demand from Aerospace and Marine Sector

The Growing Environment Concerns Due to Gasoline Combustion

Stringent Government Regulations over Carbon Emissions

Market Trend The Growing Popularity of CNG as a Fuel

Opportunities Technological Advancements in CNG Internal Combustion Engines

The Growth Opportunities from Developing Nations

Challenges The Cost and Placement of Fuel Storage Containers Is the Major Barrier to Wider/Quicker Adoption of CNG as A Fuel

The Natural Gas Internal Combustion Engine market study is being classified 20180 Presented By

AMA Research & Media LLP

[pearlsmith25]

Metallocene Polyethylene Market Competitive Insights, Significant Futuristic Trends and Opportunities 2030

Metallocene polyethylene (mPE) is a type of polyethylene (PE) that is produced using metallocene catalysts. PE is a widely used plastic material due to its excellent properties, such as high toughness, low density, and chemical resistance. However, conventional PE produced using Ziegler-Natta catalysts has some limitations in terms of its molecular structure and properties.

mPE has several advantages over conventional PE, including improved processability, better barrier properties, enhanced mechanical properties, and improved heat sealability. It finds applications in various industries, such as packaging, automotive, and healthcare.

Some of the key properties of mPE include:

High tensile strength and toughness Improved clarity and transparency Low gel content Improved barrier properties to gases and liquids Improved impact resistance Improved heat sealability

The metallocene polyethylene (mPE) market has been growing steadily over the years and is expected to continue its growth trajectory in the coming years. Some of the factors driving the growth of the mPE market include:

☛ Increasing demand for high-performance polymers: With the increasing demand for high-performance polymers in various industries, such as packaging, automotive, and healthcare, mPE has emerged as a popular choice due to its superior properties.

☛ Technological advancements: Technological advancements in the production of mPE have made it possible to produce polymers with a more uniform molecular structure and better properties, making it a more attractive material for various applications.

☛ Growing environmental concerns: As environmental concerns grow, there is an increasing demand for sustainable packaging solutions. mPE is a more sustainable option compared to conventional PE as it has a lower carbon footprint and is more easily recyclable.

☛ Growing demand from emerging economies: Emerging economies, such as China and India, are experiencing significant growth in the packaging and automotive industries, which are major end-users of mPE.

☛ Increasing investment in research and development: Major players in the market are investing heavily in research and development to develop new grades of mPE with improved properties and expand its applications in various industries.

The demand for metallocene polyethylene (mPE) has been increasing in recent years due to its superior properties compared to conventional polyethylene (PE). Some of the key factors driving the demand for mPE include:

★ Packaging industry: The packaging industry is the largest end-user of mPE, accounting for a significant share of the market demand. mPE is widely used in the production of flexible packaging films, bags, and pouches due to its improved properties such as better strength, toughness, and barrier properties.

★ Automotive industry: The automotive industry is another major end-user of mPE, where it is used in various applications such as fuel tanks, air intake manifolds, and interior trim components. The superior properties of mPE, such as high impact resistance and heat sealability, make it an attractive material for automotive applications.

★ Healthcare industry: The healthcare industry is also a growing end-user of mPE due to its superior properties such as improved clarity, low extractables, and low gel content. mPE is used in various healthcare applications such as medical packaging, tubing, and bags.

★ Sustainable packaging solutions: As environmental concerns grow, there is an increasing demand for sustainable packaging solutions. mPE is a more sustainable option compared to conventional PE as it has a lower carbon footprint and is more easily recyclable, which is driving its demand in the packaging industry.

★ Emerging economies: Emerging economies such as China and India are experiencing significant growth in the packaging and automotive industries, which are major end-users of mPE. The growing demand from these economies is also driving the demand for mPE.

The metallocene polyethylene (mPE) market offers several benefits to various industries due to its superior properties compared to conventional polyethylene (PE). Some of the key benefits of mPE include:

1. Improved properties: mPE has a narrower molecular weight distribution, uniform branching, and improved properties such as better strength, toughness, and transparency compared to conventional PE. This makes it an attractive choice for various applications where high-performance polymers are required.

2. Better processability: mPE has better processability compared to conventional PE, allowing for more efficient processing and higher productivity. It can be processed at lower temperatures and with lower energy consumption, which can lead to cost savings.

3. Enhanced barrier properties: mPE has better barrier properties to gases and liquids compared to conventional PE. This makes it an attractive material for various packaging applications where the protection of contents is crucial.

4. Improved heat sealability: mPE has improved heat sealability compared to conventional PE, making it an attractive material for packaging applications that require heat sealing, such as flexible packaging films and bags.

5. Sustainability: mPE is a more sustainable option compared to conventional PE as it has a lower carbon footprint and is more easily recyclable. This makes it an attractive choice for industries that are looking for sustainable packaging solutions.

6. Versatility: mPE can be used in various applications across industries such as packaging, automotive, and healthcare. Its superior properties make it a versatile material that can be tailored to meet specific application requirements.

[researchvishal]

Global Automotive Air Intake Manifold Market Industry Overview and Competitive Landscape till 2032

According to Future Market Insights (FMI), the automotive air intake manifold market is poised to reach US$ 52,813.4 Million by 2032 and register growth at 4.9% CAGR over the forecast period (2022-2032).

Market Landscape

The automotive air intake manifold market is identified to be consolidated, comprising market players such as Röchling SE & Co. KG, Marelli Holdings Co., Ltd., MANN+HUMMEL, MAHLE GmbH, and Donaldson Company, Inc. Market players forming supply contracts with local and regional automotive ancillaries are expected to drive market growth.

Furthermore, tie-ups between intake manifold manufacturers are fueling automotive air intake manifold market growth. Moreover, the continual dependency of local automotive OEMs on aftermarket sales will surge demand for automotive air intake manifold during the forecast period.

Automotive air intake manifold Market Projection

The rising trend among automakers to offer automotive air intake manifold as a mandatory component in their vehicles Passenger cars are one of the significant vehicle segments supporting the expansion. The sector is anticipated to benefit from expanding auto production and rising sales of sports, luxury, and high-end vehicles.

The global automotive air intake manifold market report offers noteworthy insights and analysis for the forecast period of 2022-2032. The report includes macroeconomic factors, regional pricing analysis, market dynamics, value chain analysis, market value, and volume analysis, emerging market trends, important stakeholders, a list of manufacturers and distributors, an industry roadmap for the last five years, channel partners, and strategies deployed by market players to gain a competitive edge.

A push for personal mobility, demand for comfort and safety, preference for premium features and advanced safety is expected to drive the demand in the market. Further, continuing evolution of automotive technology, including driver assistance technologies, and automated driving systems are expected to facilitate the growth in the market.

Further, key players are aiming to deliver even more significant safety benefits and meet the increasing demand for fuel-efficient vehicles. Rising demand for road transportation and growing government intervention in promoting sustainable production of vehicles is likely to propel market growth.

The material technologies in the automotive air intake manifold have significantly changed, with cast iron, aluminum, and composite plastics. The rising wave of new material technologies, such as nylon 6,6 composite material and impact-resistant plastic, are creating significant potential for automotive air intake manifolds to evenly distribute the combustion mixture to each intake port in the cylinder head, which optimizes the efficiency and performance of the engine.

Rising demand for high-speed racing cars, and stringent regulations to use light-weight materials to improve vehicle maintenance, such as aluminum and advanced composites in passenger cars and commercial vehicles, are critical factors attributed to the automotive air intake manifold market.

For more information: https://www.futuremarketinsights.com/reports/automotive-air-intake-manifold-market

Key Takeaways from Market Study

By material type, the aluminum is estimated to account for the highest share of more than 49% in terms of value in 2022.

On the basis of vehicle type, the passenger and sport cars will dominate the market creating an incremental opportunity of nearly US$ 15,199.8 Mn from 2022 to 2032.

By sales channel, OEM is set to account for more than 89% of the global automotive air intake manifold market.

Based on manifold type, the dual plane segment is expected to register fastest growth over the forecast period.

The U.S. is expected to spearhead the growth in automotive air intake manifold market during the evaluation period.

Japan and Korea are expected to vanguard the sales in East Asia automotive air intake manifold marke through 2022 & beyond

 “For better performance and volumentric efficiency of the vehicle, demand for automotive air intake manifold market is expected to surge. Further, with growing production of sustainable and fuel-efficient vehicles, manufacturers are predicted to boost the production of automotive air intake manifold and gain competitive edge”, says a Future Market Insights analyst.

[stratviewresearch]

Automotive Fuel Injection System Market Is Expected to Witness an Incredible Growth by 2028

The report on the Automotive Fuel Injection System Market published by Stratview Research covers in depth details associated with the Automotive Fuel Injection System Market.

To get a free sample report, Click here:

The Automotive Fuel Injection System Market is likely to witness a CAGR of 8.8% during the forecast period. The prime factors that are driving the Automotive Fuel Injection System Market is its superior thermal conductivity property leading to its wide usage in a wide array of industries.

Key Players

The following are the key players in the Automotive Fuel Injection System Market:

• Toyota

• Volkswagen

• General Motors

• Ford

• Nissan

• Hyundai

• BMW

• Audi

Growth drivers and Market Value:

This report, from Stratview Research, studies the Automotive Fuel Injection System Market value and growth drivers over the trend period of 2022-27. According to the report -

The fuel injection system delivers fuel or a fuel-air mixture to the cylinders by means of pressure from a pump. All diesel engine based automotive vehicles must use fuel injection by design because of diesel's greater viscosity and the need to overcome the high pressure of the compressed air in the cylinders. Gasoline engines can use either a carburetor or a fuel injection. Over a period, fuel injection has become the primary fuel delivery system in automotive gasoline engines by replacing carburetors. In gasoline engines, the fuel usually is injected into the intake manifold and mixed with air, and the resulting mixture is delivered to the cylinder.

Segment Analysis:

Based on by Fuel Type:

Gasoline direct injection system will continue to gain market acceptance in the global automotive fuel injection system market. Gasoline direct injection system is continuously replacing traditional gasoline port fuel injection system. Diesel injection system market is expected to experience a sustainable growth during the forecast period, driven by European region.

Based on Regional:

Asia-Pacific is expected to experience the fastest growth in the next five years and will remain the largest market for fuel injection system in the global automotive industry. The growth in Asia-Pacific is largely driven by increasing production of passenger vehicles in China and India to meet the regional demand. Brazil is also likely to offer healthy growth opportunities in the fuel injection system market in the global automotive industry.

Critical Questions Answered in the Report

What are the key trends in the Automotive Fuel Injection System Market?

How the market (and its various sub-segments) has grown in the last five years and what would be the growth rate in the next five years?

What is the impact of COVID-19 on Automotive Fuel Injection System Market?

What are the key strategies adopted by the major vendors to lead in the Automotive Fuel Injection System Market?

What is the market share of the top vendors?

Order a Copy of Automotive Fuel Injection System Market report here

About Us

Stratview Research is a global market research and consulting service provider, offering syndicated and custom research reports along with growth consulting services. Our business intelligence and industry research reports offer clients with insightful and actionable market data to aid strategic decision making. These exclusive reports are the result of exclusive research methodology and are available for key industries such as chemicals, composites, advanced materials, technology, renewable energy, and more. Stratview Research helps its user’s tract the ever-evolving market scenarios through its top-notch market reports.

Get in touch with us at – sales@stratviewresearch.com.Or connect with our experts at +1-313-307-4176

[wahid007posts]

Thermoplastic Composites Market - Key Players are Adopting Different Growth Strategies to Maintain Their Global Dominance

Thermoplastic composites are used in a variety of end-use industries, including aerospace & defense, transportation, wind energy, construction , consumer goods & electronics, sports & leisure, and others. Owing to its recyclability, fast processing,  and ability to remold into different shapes quickly, the demand for thermoplastic composites is expected to grow during the forecast period. However, amidst the global COVID-19 pandemic, the demand for thermoplastic composites from the industries mentioned above is expected to show a sharp decline in 2020 and would recover post 2020. The global Thermoplastic Composites Market size is expected to grow from USD 22.2 billion in 2020 to USD 31.8 billion by 2025, projecting a CAGR of 7.5% during the forecast period between 2020 and 2025.

Download PDF Brochure of the report: https://www.marketsandmarkets.com/pdfdownloadNew.asp?id=111944669

Browse 205 market data Tables and 48 Figures spread through 247 Pages and in-depth TOC on "Thermoplastic Composites Market”

Glass fiber composites comprise a major share of the composites market in terms of value and volume.

The glass fiber thermoplastic composites are cheaper as compared to carbon, basalt, and aramid fibers composites. Low cost, ability to blend with all the thermoplastic resins, ease of manufacturing, and comparable properties to other fiber thermoplastic composites are driving the growth of glass fiber thermoplastic composites in various end-use industries such as construction, wind energy, transportation, and consumer goods & electronics.

There is a high demand for glass fiber composites from the transportation, consumer goods & electronics, and wind energy industries. However, the demand for glass fiber thermoplastic  composites is expected to decline in 2020 due to COVID-19 that has enforced lockdown across national and international borders.  This has resulted in reduced automotive and consumer goods & electronics products sales. The recovery in the end-use industries would restore the demand for glass fiber thermoplastic composites during the forecast period.

PA resins accounts for the largest market share in the global thermoplastic composites market in terms of value and volume.

The high demand is mainly driven by the growing consumption of short glass fiber reinforced polyamide in transportation, sports & leisure, consumer goods, industrial, marine, energy, oil & gas, and construction & building applications. But, because of the lockdown situation occurred due to COVID-19, many floor workers are unable to work in manufacturing facilities, which has resulted in the reduction in output of resins and price fluctuations. Thus, the demand for PA thermoplastic resins is expected to decline in 2020. With the recovery of aforementioned industries, demand for PA based thermoplastic composites would rise gradually during the forecast period.

SFT holds a significant revenue share in the global thermoplastic composites market in terms of value and volume

High demand for SFT in transportation, consumer goods & electronics is driving the growth of the SFT thermoplastic composites market. China is the major market for SFT due to wel established automotive and electronics industries. However, the country being majorly affeceted by the pandemic, the demand for SFT in the automotive and electronis indutreis has reduced. The demand is expected to stabilize in 2021 and would increase with recovery of the industries.

The transportation end-use industry accounts for the largest market share in the global thermoplastic composites market during the forecast period in terms of value and volume.

The demand for lightweight thermoplastic composites is driven by the increasing emphasis on enhancing fuel-efficiency in the automobile industry. Thermoplastic composites are widely used in interior automotive parts, which include brake pedals, airbag modules, engine noise shielding, instrument panel carrier, trunk liners, and air intake manifolds, among others. The demand for thermoplastic composites in automotive and penetration in electric vehicles has been severely impacted by the COVID-19. However, the demand for the thermoplastic composites would surge with recovery of the global automotive and electric vehicle sectors post 2020. .

https://www.prnewswire.com/news-releases/thermoplastic-composites-market-worth-31-8-billion-by-2025--exclusive-report-by-marketsandmarkets-301104555.html

APAC is expected to account for the largest market share in the thermoplastic composites market during the forecast period.

APAC accounts for the biggest share of the global thermoplastic composites market. The electrical & electronics, automotive, and consumer goods sectors are the major consumers of thermoplastic composites in the region. North America is the second major consumer of thermoplastic composites. Aerospace & defense and automotive are the major industries fueling the growth of the thermoplastic composites market in this region. Moreover, the US is a manufacturing hub of various commercial, military, and private aircraft. However, the COVID-19 outbreak has affected the demand for thermoplastic composites in the region. On the positive side, the pandemic COVID-19 has instigated nations such as India to reduce dependency on imported goods and manufacture parts/components locally. Such initiatives coupled with recovery in the thermoplastic composites end-use industries will increase the demand for thermoplastic composites in APAC.

The key players in the thermoplastic composites market include BASF SE (Germany), Celanese Corporation (US), SABIC (Saudi Arabia), DowDuPont Inc. (US), Koninklijke DSM N.V. (Netherlands), Toray Industries, Inc. (Japan), and Lanxess AG (Germany). Among others. These companies are involved in adopting various inorganic and organic strategies to increase their foothold in the composites market. These players have taken different organic and inorganic developmental strategies over the past five years.

Early buyers will receive 10% free customization on this report.

Don't miss out on business opportunities in Thermoplastic Composites Market.

Speak to Our Analyst and gain crucial industry insights that will help your business grow.

https://www.marketsandmarkets.com/speaktoanalystNew.asp?id=111944669

About MarketsandMarkets

MarketsandMarkets is the largest market research firm worldwide in terms of annually published premium market research reports. Serving 1700 global fortune enterprises with more than 1200 premium studies in a year, M&M is catering to a multitude of clients across 8 different industrial verticals. We specialize in consulting assignments and business research across high growth markets, cutting edge technologies and newer applications.

Contact: Mr. Ashish Mehra MarketsandMarkets™ INC.  630 Dundee Road  Suite 430  Northbrook, IL 60062  USA: 1-888-600-6441  sales@marketsandmarkets.com

[ellinapark]

Natural Gas Internal Combustion Engine Outlook: World Approaching Demand & Growth Prospect 2022-2027

Global Natural Gas Internal Combustion Engine Market Report from AMA Research highlights deep analysis on market characteristics, sizing, estimates and growth by segmentation, regional breakdowns & country along with competitive landscape, players market shares, and strategies that are key in the market. The exploration provides a 360° view and insights, highlighting major outcomes of the industry. These insights help the business decision-makers to formulate better business plans and make informed decisions to improved profitability. In addition, the study helps venture or private players in understanding the companies in more detail to make better informed decisions. Major Players in This Report Include

Caterpillar (United States)

Mitsubishi Heavy Industries (Japan)

Cummins (United States)

Daimler AG (Germany)

Deutz (Germany)

Yanmar Company (Japan)

Rolls-royce (United Kingdom)

Hyundai (South Korea)

Agcopower (Finland)

Ashok Leyland (India)

Shanghai Diesel (China)

Compressed natural gas vehicles operate much like gasoline-powered vehicles with spark-ignited internal combustion engines. The engine functions the same way as a gasoline engine. Natural gas is stored in a fuel tank, or cylinder, typically at the back of the vehicle. A CNG fuel system transfers high-pressure natural gas from the fuel tank to the engine’s intake manifold or combustion chamber. The pressure is then reduced to a level compatible with the engine fuel injection system, and the fuel is introduced into the intake manifold or combustion chamber, where it is mixed with air. The fuel-air mixture is then compressed and ignited by a spark plug. Market Drivers  The Exponential Growth in Automotive Industry Worldwide

The Rising Demand from Aerospace and Marine Sector

The Growing Environment Concerns Due to Gasoline Combustion

Stringent Government Regulations over Carbon Emissions

Market Trend  The Growing Popularity of CNG as a Fuel

Opportunities  Technological Advancements in CNG Internal Combustion Engines

The Growth Opportunities from Developing Nations

Challenges  The Cost and Placement of Fuel Storage Containers Is the Major Barrier to Wider/Quicker Adoption of CNG as A Fuel

The Natural Gas Internal Combustion Engine market study is being classified 20180 Presented By

AMA Research & Media LLP