#PCB Security Update

[newsbetulhub]

PSL मैच रद्द: रावलपिंडी ड्रोन अटैक के बाद कराची, दोहा और दुबई में होंगे बाकी मुकाबले

Highlights :रावलपिंडी क्रिकेट स्टेडियम के पास ड्रोन अटैक के बाद PSL मैच रद्दकराची किंग्स और पेशावर जाल्मी के बीच आज का मुकाबला नहीं हो सकाकराची, दोहा और दुबई में शिफ्ट किए जा सकते हैं बाकी बचे मैचविदेशी खिलाड़ी टूर्नामेंट छोड़ने का कर सकते हैं फैसलापाकिस्तान में PSL, भारत में IPL का रोमांच जाररावलपिंडी में ड्रोन अटैक के बाद PSL मैच रद्द, बाकी मुकाबले कराची, दोहा और दुबई में होंगे BetulHub डेस्क…

[kitwallace]

Moisture sensor development - 2022/23

Multiple sensors have been running over winter 22 to summer 23 and some problems have arisen:

One temperature sensor stopped functioning but in a way that eluded the error detection. The symptom was that the two sensors showed exactly the same measurement. This turned out to be a configuration issue, where both sensor were mapped to the same temperature.

Battery life was too short on a couple of sensors. This may be because of poor quality batteries, poor connections in the battery holder or due to excess drain somewhere. After experimentation with better quality batteries (Samsung 25R rated at 2500 mAh) it seems the main problem is poor quality batteries.

Moisture sensors losing discrimination. On a new sensor the range from wet to dry is typically 900 but this reduced to 270. I found that cleaning off the old silicon sealant, cleaning the board and resealing brought the readings back to normal.

Moisture sensor connection. The waterproofing with silicon and the JST connector are a poor design. Securing this connector with a zip tie helps to secure this connector.

Rusty main board. One device failed due to rust getting into the pins and socket on the main board connector. This is evidence of moisture in the device container. The sensor cable entrance is sealed with a large amount of silicon sealant which often fails. However when a second device also failed, having drained new , quality batteries very quickly, it seems that the idea of using socket strips on an outdoor device, however well sealed, is a mistake. In any case the board and the chip are really the only significant components so they may as well be soldered together.

One sensor on a public Tiny Forest was stolen. This despite being well - hidden and having a notice inside the box explaining the scientific purpose of the device.

I had considered changing the design of the PCB to avoid the use of a ground plane since I found this made soldering to ground terminals difficult and poor connections created problems. On reflection, my problem is probably insufficient thermal inertia in my small iron and the use of a better, temperature-controlled iron would solve this issue whilst retaining the benefits of a ground plane.

Labels printed on a label printer fade very quickly in sunlight.

An error in the code for the test phase meant that sleep time could be negative with odd results.

It has been suggested that over-the-wire updating of the code should be implemented but I am concerned about the current demand,

Improvements

Have a working set of all three sensors which can be plugged into a device to check the cause of a failed sensor.

Replace the cheap 18650 batteries with Samsung 25R flat top batteries.

Solder the chip directly to the PCB instead of using a socket strip

Develop a better sealing system for the cable entry.

Use a chinagraph pen for labeling

Reconsider strategy for protecting devices in public places

[careerkickservice]

NEET Counselling 2025: Important Dates, Procedure, Registration Fees, Eligibility, Security Fee, Cut-off, and Refund

The NEET 2025 counselling will be conducted in numerous rounds with an additional Special Stray Vacancy Round to fill all medical seats, including Deemed Universities and AIIMS seats. The vacant seats in each round will be finalized, and seats will be allotted to candidates by merit, preference, and availability. The NEET counselling rounds will be conducted by the Medical Counselling Committee (MCC), and they will include seat allotment, choice filling, and document verification. Keep yourself aware of the official updates of NTA and MCC to have a seamless NEET UG Counselling 2025.

Important Dates for NEET Counselling 2025

The NEET UG 2025 exam will be held on May 4, 2025, and the results will be declared by June 14, 2025. After this, the NEET Counselling 2025 will begin in July or August 2025, allowing candidates to get admission into undergraduate medical and dental courses in India.

NEET Counselling Structure: Centralized and State-Level Admissions

The NEET counselling process is divided into central and state-level procedures. The central counselling is conducted for 15% All India Quota (AIQ) seats, covering admissions to MBBS, BDS, and BSc Nursing courses at Central and Deemed Universities. In contrast, the remaining 85% of state quota seats are managed by respective State Authorities for admissions to medical colleges within their states.

UG Counselling:

15% All India Quota seats MBBS/ BDS Seats of States (participation of the Union Territory of J&K is subject to their contribution of seats),

100% MBBS/ BDS Seats of BHU,

100% MBBS Seats of AIIMS across India,

100% JIPMER seats (Puducherry/ Karaikal),

100% AMU

85% of the State Quota seats of DU/I.P. University (VMMC/ ABVIMS/ESIC Dental),

100% -Faculty of Dentistry (Jamia Millia Islamia) along with 5% internal Quota of Jamia students

15% IP quota seats of ESIC.

NEET 2025 Counselling Process:

To register for NEET 2025, candidates must visit the MCC website and fill in their details, like NEET 2025 registration number and academic information.

To complete the counselling process, candidates are required to pay the registration fee, which is divided into two parts: a non-refundable fee and a refundable fee.

During the Choice Filling and Locking stage, candidates can select their preferred colleges and courses, with the option to add, delete, or rearrange their choices. They must lock their final selections before the deadline.

NEET 2025 seat allocation is determined by the candidate’s All India Rank (AIR) and their chosen preferences. The MCC will release the seat allotment list on its official website.

Candidates must report to the assigned college for document verification. Failure to do so will result in the cancellation of their allotted seat.

NEET Counselling 2025 Eligibility Criteria

To be eligible to participate in NEET UG 2025 counselling, candidates need to meet the following requirements:

Candidates must have passed Class 12 with Physics, Chemistry, and Biology/Biotechnology as core subjects with the following minimum marks:

General category: Minimum 50% aggregate in PCB

Reserved category (SC/ST/OBC): Minimum 40% aggregate in PCB

PwD candidates (General/EWS): Minimum 45% aggregate in PCB

They should be eligible for the National Eligibility cum Entrance Test (NEET)

They need to be registered on the MCC official website

All the candidates, including UT of J&K candidates, are eligible to attend counselling for AIQ seats and deemed universities.

Reservation Policy (as per Central Government norms)

Category-wise NEET 2025 Govt. Medical College Cut-off Trend Analysis (AIQ 15%)

NEET UG 2025 Counselling Rounds

NEET 2025 counselling will be conducted in four main rounds:

Round 1

Round 2

Round 3 / Mop-up Round

Stray Vacancy Round

Following these initial four rounds, additional counselling rounds may be conducted if seats remain vacant. The total number of rounds may increase based on the availability of unfilled seats.

NEET Counselling Security Fee Refund

If the seat is allotted, the security deposit will be adjusted against the first-year fees.

If no seat is allotted, the full amount of the security deposit will be refunded to the original payment account.

Refund of the Security amount will only take place once all rounds of Counselling have been completed. MCC will publish the completion counselling notification on their portal.

The security deposit will be refunded within 15 days of the notification, with the entire process to be completed within 30 days of the notification.

Documents Required for NEET Counselling 2025

The following documents are required for NEET Counselling 2025 for verification and admission purposes.

NEET 2025 Admit Card

NEET 2025 Scorecard

Class 10th & 12th Mark Sheets

Identity Proof (Aadhar/PAN/Passport/Voter ID)

Passport-size Photographs (8 copies)

Caste Certificate (if applicable)

Disability Certificate (if applicable)

For NRI candidates, the following documents are mandatory:

A copy of the sponsor’s passport and an embassy certificate.

A sponsorship affidavit stating the sponsor’s commitment to bear the expenses for the entire duration of study, and

A relationship affidavit establishing the candidate’s relationship with the sponsor.

Important Points to Note for NEET Counselling 2025

Fresh registrations are permitted during Round 1, Round 2, and the Mop-up Round of NEET counselling. However, once a seat is allotted and accepted in Round 2, candidates are not eligible for any further upgrades or changes.

Those who choose to reject their Round 2 seat must re-register for the Mop-up Round, which will lead to the loss of their security deposit.

Conclusion:

The NEET counselling 2025 is an important process for candidates who are trying to get admissions through the national-level entrance exam. NEET counselling is organized by the MCC in a centralized as well as state-level process. Each stage of the NEET counselling process is important therefore, candidates need to plan the essential steps thoroughly, such as registration, choice filling, seat allotment, verification, and always keep in mind official updates. Candidates will need to understand eligibility criteria, the layout of fees, rules for refunds. Overall, being organized and informed will help candidates have a smooth counselling experience, while maintaining the best chance for securing a seat in their institute of choice.

If you’re looking for the best Admission-Consultants in Kakadeo and Gr. Noida, let Careerkick guide your medical career journey with expert NEET counselling that’s accurate, timely, and completely personalized.

[seogosparrow]

Study MBBS in Bangladesh- A Smart Choice for Aspiring Doctors in 2025

Introduction

In the era of cut-throat competition and skyrocketing tuition fees, aspiring medical students are seeking quality education that is affordable and globally recognized. Bangladesh has rapidly gained popularity as a top destination for pursuing MBBS, particularly for students from India, Nepal, Bhutan, and other South Asian countries. With an internationally aligned curriculum, world-class infrastructure, and experienced faculty, Bangladesh offers the perfect mix of academic excellence and cost-effectiveness.

Let’s explore why studying MBBS in Bangladesh is a smart trend in 2025 and how you can take the next step with confidence.

Why Bangladesh for MBBS?

1. Globally Accepted Degrees

Medical colleges in Bangladesh follow the Bangladesh Medical and Dental Council (BMDC) curriculum, aligned with global standards. MBBS degrees from Bangladesh are recognized by:

National Medical Commission (NMC), India

World Health Organization (WHO)

Educational Commission for Foreign Medical Graduates (ECFMG), USA

General Medical Council (GMC), UK

This allows graduates to appear for exams like FMGE, USMLE, and PLAB, making global career paths accessible.

Explore global recognition: WHO Directory of Medical Schools

2. Affordable Fee Structure

The total tuition fee ranges from USD $35,000 to $50,000 for the full 5-year program. Importantly, Bangladesh colleges do not charge any donation or capitation fee, unlike many private Indian institutions. This transparency in cost makes it highly attractive for middle-income families.

3. Quality Education with Strong Clinical Training

Bangladesh’s medical colleges feature well-equipped labs, updated libraries, and attached teaching hospitals. Students get extensive clinical exposure from the second year, allowing them to develop both knowledge and bedside manners early in their education.

Eligibility for MBBS in Bangladesh

To study MBBS in Bangladesh in 2025, you must:

Have at least 60% marks in PCB (Physics, Chemistry, Biology) in 10+2.

Be NEET qualified (mandatory for Indian students).

I have completed 12th within the last two academic years.

Hold a valid passport.

For detailed requirements, visit our MBBS Eligibility Guidelines.

Admission Process – Step by Step

Get Counseled – Choose the right college based on your budget and academic score.

Apply Online/Offline – Submit NEET score, transcripts, passport, and passport-size photos.

Receive Offer Letter – From the selected medical college.

Visa Process – Apply for a student visa with supporting documents.

Travel & Join – Attend orientation and begin your academic session (typically in August/September).

Our team at EduHawk provides complete assistance for each of these steps.

Life in Bangladesh: Safe, Friendly & Supportive

1. Cultural Comfort

Bangladesh shares cultural and linguistic similarities with India, especially West Bengal, Assam, and Bihar. Bengali is widely spoken but English is the official medium of instruction in all medical colleges.

2. Affordable Living

Students can manage living costs within $100–150/month, which covers accommodation, meals, and basic utilities. Most hostels offer hygienic, Indian-style food, Wi-Fi, laundry services, and 24x7 security.

Top Medical Colleges in Bangladesh

Here are some NMC-approved colleges popular among international students:

Dhaka National Medical College

Community Based Medical College

Green Life Medical College

Enam Medical College

TMSS Medical College

Check our full list of Top-Ranked MBBS Colleges in Bangladesh with fee structure and FMGE performance.

EduHawk: Your Trusted Admission Partner

Navigating foreign admissions can be confusing, but not with EduHawk. We offer:

Personalized college counseling

Visa and document support

Travel & hostel arrangements

On-ground help in Bangladesh

Post-graduation guidance

With a presence in Delhi, Patna, Ranchi, and Lucknow, we ensure support before, during, and after your admission.

Need help choosing your medical college? Contact EduHawk Counsellors

Career Opportunities After MBBS in Bangladesh

MBBS graduates from Bangladesh can:

Clear FMGE and practice in India

Appear for USMLE/PLAB and settle abroad

Pursue MD/MS in India or overseas

Work in hospitals or clinics as junior doctors or house surgeons

Many students also go on to become successful researchers or medical entrepreneurs.

Testimonials

"Studying MBBS in Bangladesh gave me both global exposure and financial relief. EduHawk handled everything from my admission to my visa." — Ritika Sharma, Dhaka National Medical College

"Great education, safe environment, Indian food, and zero donation! I couldn’t ask for more." — Mohd Aariz, TMSS Medical College

Final Words

Bangladesh offers a unique opportunity to pursue a globally accepted MBBS degree at a fraction of the cost compared to private colleges in India or medical schools in the West. Its cultural similarity, English-language instruction, and robust clinical education make it a top medical destination for 2025.If you’re an aspiring doctor with a vision to study affordably and achieve globally, MBBS in Bangladesh should be on your radar.

[argroupofedu5]

Secure Your Medical Future at Aarupadai Veedu Medical College – A Top Choice for MBBS Aspirants

If you're dreaming of becoming a doctor and want to study in a top-rated private medical college, Aarupadai Veedu Medical College is a great option. Located in Puducherry, this college offers quality medical education, modern infrastructure, and an excellent learning environment for students who want to pursue MBBS in India.

In this article, we’ll give you a detailed overview of Aarupadai Veedu Medical College, why it stands out, its MBBS course structure, fees, eligibility, and the facilities students enjoy here. This will help you decide if this college fits your career goals.

About Aarupadai Veedu Medical College

Aarupadai Veedu Medical College is a part of the well-known Vinayaka Mission’s Research Foundation (Deemed to be University). It is approved by the National Medical Commission (NMC) and recognized by the Ministry of Health and Family Welfare, Government of India.

The college is known for providing quality medical education with a balance of academic excellence, practical training, and research opportunities. The college aims to produce skilled, compassionate, and professional doctors who can serve the healthcare system with dedication.

MBBS Course at Aarupadai Veedu Medical College

The MBBS course at Aarupadai Veedu Medical College follows the NMC guidelines and is a 5.5-year program, including 4.5 years of academic learning and 1 year of mandatory internship. The curriculum covers all major pre-clinical, para-clinical, and clinical subjects.

Students get hands-on experience in well-equipped laboratories, simulation centers, and affiliated hospitals. The clinical training provided helps students develop the confidence and practical knowledge required for real-world patient care. 

Why Choose Aarupadai Veedu Medical College?

Here’s why many students choose Aarupadai Veedu Medical College for their MBBS journey:

NMC Recognition: The college is recognized by the NMC, making your MBBS degree valid across India and eligible for PG studies.

Modern Infrastructure: The campus offers smart classrooms, high-tech laboratories, and fully equipped operation theatres.

Experienced Faculty: A team of experienced and dedicated professors guides students throughout their academic journey.

Clinical Exposure: Students receive early clinical exposure at AVMC Hospital, which is equipped with 750+ beds and modern medical facilities.

Research Opportunities: The institution promotes research among students with projects, workshops, and conferences.

Safe Campus Life: Hostel facilities, Wi-Fi, 24/7 security, and extracurricular activities provide a comfortable student life.

Eligibility Criteria for MBBS Admission

To apply for the MBBS program at Aarupadai Veedu Medical College, students must fulfill the following eligibility conditions:

Must have passed 10+2 or equivalent with Physics, Chemistry, Biology/Biotechnology, and English.

Should have scored at least 50% marks (40% for reserved categories) in PCB subjects.

Must qualify for the NEET-UG entrance exam, as per the norms of NMC and MCC.

MBBS Admission Process

Admissions to the MBBS program at Aarupadai Veedu Medical College are done through the NEET-UG counseling conducted by the Medical Counselling Committee (MCC) under the Deemed University quota.

Steps to apply:

Register on the official MCC website for Deemed University counseling.

Fill in your choices, including Aarupadai Veedu Medical College.

Participate in counseling rounds and lock your seat.

Complete admission formalities at the college after allotment.

MBBS Fee Structure

The MBBS fees at Aarupadai Veedu Medical College are competitive compared to other private medical colleges under Deemed Universities. Here's a rough fee breakdown (subject to updates):

Tuition Fee: ₹20,00,000 per year

Hostel Fee: ₹1,50,000 per year (including food & accommodation)

Miscellaneous Charges: ₹75,000 – ₹1,00,000 (one-time or annually)

Total estimated cost for the entire MBBS program is around ₹1.10 to ₹1.20 Crore.

Students should check the official college website or contact the admission office for the latest fee structure and scholarship options.

Hostel and Student Life

Aarupadai Veedu Medical College offers separate hostel facilities for boys and girls with a clean, safe, and supportive atmosphere. The hostels are located within the campus and are monitored for security. 

Students enjoy a healthy lifestyle with nutritious food, indoor and outdoor sports, cultural events, and student clubs. The environment is both academically enriching and emotionally supportive, helping students adjust to medical college life smoothly. 

Career Opportunities After MBBS

After completing MBBS from Aarupadai Veedu Medical College, students can:

Appear for NEET-PG or other post-graduate medical entrance exams.

Work in reputed hospitals, clinics, or government health departments.

Go abroad for PG (after clearing licensing exams like USMLE, PLAB, or AMC).

Pursue research or medical education as a career path.

The strong clinical foundation and academic excellence make AVMC graduates confident and competent to succeed in their medical careers.

Final Words

If you are looking for a college that offers excellent medical education, clinical training, and a supportive student environment, Aarupadai Veedu Medical College is a great choice. With a NEET qualifying score and proper guidance, you can secure admission to this respected institute and begin your journey toward becoming a successful doctor.

Stay updated with NEET counseling dates, prepare your documents, and keep Aarupadai Veedu Medical College as your top preference while applying through Deemed University counseling. Your dream of becoming a doctor starts here! 

[aipmstprimary1]

Create a Future in Healthcare with the Best Scholarship for Medical Students in India

Every student in the country aspires to build a career in the medical sector. Nevertheless, the high price of a good education frequently serves as an obstacle to talented students. This is where a nationally known scholarship scheme creates a window of opportunity. It is meant to help potential medical students by providing funding to study for an undergraduate degree in government-approved institutions.

Every year, thousands of students who have completed their Class 12 with physics, chemistry, and biology (PCB) apply for this life-changing scholarship for medical students in India. It also takes the financial burden off and allows students to concentrate solely on studies and skill-building. It has seen thousands of students get into the healthcare industry without worrying about how to clear their high college fees.

Courses Covered Under the Scholarship Program

This scholarship scheme offers financial support for admission into a vast variety of medical and allied science programs. Students can apply for scholarships under the following streams:

B. Pharma (Bachelor of Pharmacy)

B.Sc. Nursing (Bachelor of Science in Nursing)

B.Sc. Bio-Tech (Biotechnology)

Paramedical Courses

B.P.T. (Bachelor of Physiotherapy)

B.Sc. Agriculture (Hons.)

B.M.L.T. (Bachelor in Medical Laboratory Technology)

Such programs are good stepping stones in the world of healthcare, pharmaceuticals, diagnostics, biotechnology, and public health. By securing a scholarship for medical students in India, students gain direct access to these in-demand fields with reduced or no financial burden.

Why This Scholarship Program Stands Out

This medical scholarship program is not merely a source of finance but a ladder to a professional career. It offers:

Up to 100% college fee waiver for eligible students

Admission support in top-ranked, government-approved institutions

Transparency and merit-based selection

Freedom from student loans

Online application and support system

It seeks to support ambitious but financially strained students, granting them an opportunity to achieve their career goals. Having a direct and organized process, the scholarship remains unbiased, awards merit, and is accessible nationwide.

How to Apply and Secure Your Future

The process of registration is 100% online and student-friendly. After a candidate applies, they get necessary updates on the examination timetable, admit cards, and examination results. The scholarship is offered based on performance and additional information given on admission to the relevant institutions.

This initiative lifts up smart students who might have been unable to realize the dream of serving in the healthcare sector because they lack the economic means. With every scholarship, one more professionally minded person comes to the medical world.

Make the next step toward your goals. Build a secure, fulfilling, and financially supported medical career today through a scholarship for medical students in India.

[komalargroup]

DY Patil Medical College – A Premier Destination for MBBS in India

DY Patil Medical College, located in Pune, Maharashtra, is one of the top private medical institutions in India. Recognized by the National Medical Commission (NMC) and affiliated with the renowned Dr. DY Patil Vidyapeeth, this college offers world-class medical education with excellent infrastructure and an experienced faculty. It is a preferred choice among MBBS aspirants for its high academic standards, clinical exposure, and overall student development.

About DY Patil Medical College

Established in 1996, DY Patil Medical College was the first private college in Maharashtra to receive approval from the Medical Council of India for an intake of 100 students. Over the years, the intake has increased, and today the college admits 250 MBBS students annually. The institution is known for its commitment to producing skilled, compassionate, and ethical medical professionals.

The campus is located in Pimpri, Pune, and is part of the DY Patil Educational Complex, which houses multiple institutions including dentistry, nursing, physiotherapy, and biotechnology colleges. This proximity offers a multidisciplinary approach to learning.

Courses Offered

MBBS (Bachelor of Medicine and Bachelor of Surgery) – 5.5 years (including a 1-year internship)

MD/MS (Postgraduate Medical Courses) – Offered in various specialties

Superspecialty Courses – DM/MCh programs in select disciplines

MBBS Admission Process

Admissions to the MBBS program are based on the NEET-UG entrance exam. Students from across India compete to secure a seat in this prestigious college. A merit list is prepared based on NEET scores, and the counseling process is conducted through the MCC (Medical Counseling Committee) for Deemed Universities.

Eligibility Criteria for MBBS

Must have passed 10+2 or equivalent with Physics, Chemistry, Biology/Biotechnology, and English

Minimum 50% aggregate marks in PCB (40% for reserved category)

Qualifying NEET-UG score as per the cut-off

Infrastructure and Facilities

DY Patil Medical College boasts modern infrastructure, well-equipped laboratories, and smart classrooms. The teaching hospital attached to the college – Dr. DY Patil Hospital & Research Centre – has over 1,500 beds, offering extensive clinical exposure to students. The hospital serves a large patient base, providing hands-on training in real-world scenarios.

Key facilities include:

Central library with over 35,000 medical books and journals

Separate hostels for boys and girls with 24x7 security

Cafeteria and mess serving hygienic meals

Indoor and outdoor sports facilities

Simulation labs for clinical skill training

Wi-Fi enabled campus

Faculty and Academics

The faculty at DY Patil Medical College includes highly qualified professors, clinicians, and researchers. They adopt innovative teaching methods such as problem-based learning, case studies, and clinical rounds. The curriculum is regularly updated in line with NMC guidelines and global best practices.

In addition to academics, students are encouraged to participate in research, conferences, seminars, and workshops. The college also promotes international collaboration through exchange programs and partnerships with reputed global medical institutions.

Hostel and Student Life

Student accommodation at DY Patil Medical College is designed for comfort and safety. Hostels are spacious, well-ventilated, and furnished with all basic amenities like study tables, wardrobes, and attached washrooms. Wi-Fi, recreation rooms, and laundry services are also available.

Student life is vibrant with several cultural and sports events organized annually. Clubs for music, dance, drama, and literary activities ensure holistic development beyond academics.

Why Choose DY Patil Medical College?

Recognized by NMC and part of a Deemed University

High NEET ranking and preference among top scorers

State-of-the-art infrastructure and 1,500+ bedded teaching hospital

Experienced faculty with a focus on research and innovation

Excellent placement and postgraduate success rate

Safe, student-friendly campus in Pune

Placement and Career Support

DY Patil Medical College supports students with career guidance, internships, and postgraduate admissions. Alumni of the college have secured placements in leading hospitals in India and abroad, while many continue to pursue MD/MS and super-specialty courses in reputed institutions.

Conclusion

DY Patil Medical College is a well-established and highly respected institution for MBBS and medical education in India. With its focus on academic excellence, clinical training, and student well-being, it stands out as an ideal choice for aspiring doctors. For those looking to build a strong foundation in medicine and enjoy a holistic college experience, DY Patil Medical College is truly a destination of opportunity.

[argroup6]

Complete Guide to Studying MBBS in Madhya Pradesh – Eligibility, Colleges, Fees & More

Are you dreaming of becoming a doctor and looking for the best state to pursue MBBS? If yes, then MBBS in Madhya Pradesh is a great option for medical aspirants across India. With top-ranking medical colleges, affordable fees, and excellent clinical exposure, Madhya Pradesh is becoming one of the most preferred destinations for MBBS students.

This blog gives you a complete and updated guide on everything you need to know about studying MBBS in Madhya Pradesh – from eligibility and entrance exams to colleges, admission process, fees, and career opportunities.

Why Choose MBBS in Madhya Pradesh?

There are several reasons why thousands of students prefer MBBS in Madhya Pradesh every year:

Top Government and Private Medical Colleges

Madhya Pradesh is home to some of the best government medical colleges like Gandhi Medical College (Bhopal), Netaji Subhash Chandra Bose Medical College (Jabalpur), and many reputed private colleges such as LN Medical College and Index Medical College.

Affordable Fee Structure

Compared to states like Maharashtra, Karnataka, and Delhi, the tuition fees for MBBS in Madhya Pradesh are relatively lower, especially in government colleges.

Centralized Admission Process

The state conducts a well-organized and transparent admission process through online counseling managed by the Directorate of Medical Education (DME), Madhya Pradesh.

Quality Education and Clinical Exposure

Students studying MBBS in Madhya Pradesh receive top-quality education with hands-on training in hospitals that handle thousands of patients daily.

Safe and Student-Friendly Cities

Cities like Bhopal, Indore, Gwalior, and Jabalpur are safe, clean, and student-friendly. They offer a peaceful environment that helps you focus on your studies.

List of Top Colleges Offering MBBS in Madhya Pradesh

Here are some of the leading colleges where you can pursue MBBS in Madhya Pradesh:

Government Medical Colleges:

Gandhi Medical College, Bhopal

Netaji Subhash Chandra Bose Medical College, Jabalpur

Gajra Raja Medical College, Gwalior

Shyam Shah Medical College, Rewa

Bundelkhand Medical College, Sagar

Atal Bihari Vajpayee Government Medical College, Vidisha

Private Medical Colleges:

LN Medical College, Bhopal

Index Medical College, Indore

R.D. Gardi Medical College, Ujjain

People's College of Medical Sciences, Bhopal

Chirayu Medical College, Bhopal

Amaltas Institute of Medical Sciences, Dewas

Eligibility Criteria for MBBS in Madhya Pradesh

To apply for MBBS in Madhya Pradesh, you must meet the following eligibility requirements:

Must have completed 10+2 with Physics, Chemistry, Biology, and English.

Must have secured at least 50% marks in PCB (40% for SC/ST/OBC).

Must be NEET-UG qualified.

Minimum age should be 17 years as on 31st December of the admission year.

Must be an Indian citizen. Domicile is required for government quota seats.

Admission Process for MBBS in Madhya Pradesh

Admission for MBBS in Madhya Pradesh is conducted through the MP NEET UG Counseling portal. Here's a step-by-step guide:

Step 1: Registration

Register on the official website of DME, Madhya Pradesh for counseling.

Step 2: Document Upload

Upload required documents such as NEET scorecard, 10+2 mark sheet, domicile certificate, photo ID, etc.

Step 3: Choice Filling

Select your preferred colleges offering MBBS in Madhya Pradesh and lock your choices.

Step 4: Seat Allotment

Based on your NEET rank and preferences, seat allotment is done.

Step 5: Reporting

Once the seat is allotted, report to the respective college for document verification and fee payment.

MBBS Seat Distribution in Madhya Pradesh

As per the latest data, Madhya Pradesh offers over 4,000 MBBS seats across government and private colleges.

Government Colleges: ~2,000 seats

Private Colleges: ~2,000+ seats

In private colleges, seats are divided into:

State Quota Seats

Management Quota Seats

NRI Quota Seats

Fee Structure for MBBS in Madhya Pradesh

Here's a general fee idea for different types of colleges offering MBBS in Madhya Pradesh:

Government Colleges:

Tuition Fee: ₹1,00,000 – ₹1,50,000 per year

Hostel Fee: ₹10,000 – ₹30,000 per year

Private Colleges:

Tuition Fee: ₹7,00,000 – ₹12,00,000 per year

Hostel + Mess Fee: ₹1,00,000 – ₹1,50,000 per year

NRI Fee: ₹20,00,000 – ₹25,00,000 per year

Documents Required for Admission

To take admission in MBBS in Madhya Pradesh, you will need the following documents:

NEET-UG Scorecard

Class 10 & 12 Mark Sheets

Domicile Certificate (for state quota)

Migration Certificate

Passport-size Photographs

Caste Certificate (if applicable)

Aadhaar Card or Valid ID Proof

Hostel & Campus Life

Medical colleges in Madhya Pradesh offer well-maintained hostels with all modern facilities. Hostels are usually within the campus and provide:

24/7 Security

Mess and Cafeteria

Wi-Fi and Study Rooms

Sports Facilities

Common Rooms for Recreation

Life as an MBBS student is challenging but also filled with growth, friendships, and unforgettable experiences.

Career Opportunities After Completing MBBS in Madhya Pradesh

Once you complete your MBBS in Madhya Pradesh, you have multiple career paths to choose from:

Appear for NEET PG to pursue MD/MS

Work as a Medical Officer in government hospitals

Prepare for UPSC CMS, AIIMS PG, or FMGE (if going abroad)

Work in private hospitals or start your own clinic

Explore research, public health, or hospital management

Final Thoughts

If you're serious about becoming a doctor and want a balanced mix of quality education, clinical training, and affordable fees, then MBBS in Madhya Pradesh is definitely worth considering. From top-ranked colleges to a supportive learning environment, MP offers everything a medical student needs.

So don’t wait—start your journey toward a successful medical career by choosing MBBS in Madhya Pradesh today.

Need Help?

We at AR Group of Education offer admission support, counseling, and documentation help for MBBS aspirants across India and abroad.

Feel free to contact us at:

523, 5th Floor, Wave Silver Tower, Sec-18 Noida, UP-201301

+91–7076909090

info@argroupofeducation.com

[blogmetaeducationindia-blog]

MBBS Admission Process in India Explained – 2025 Updates

With a growing number of NEET aspirants every year, securing an MBBS seat in India has become increasingly competitive. The admission process, though centralized and merit-based, can be confusing for first-timers due to multiple counseling authorities, quotas, and documentation requirements. This article provides a detailed explanation of the MBBS admission process in India for 2025, including updated steps, counseling procedures, and timelines.

Step-by-Step MBBS Admission Process in 2025

1. Qualify NEET 2025 (National Eligibility cum Entrance Test)

The very first and mandatory step for MBBS admission in India is clearing the NEET UG 2025 examination. Conducted by the National Testing Agency (NTA), it serves as the single entrance test for all medical colleges—government, private, deemed, and even AIIMS & JIPMER.

Key NEET 2025 Details:

Expected Exam Date: May 2025

Application Window: January to February 2025

Subjects Covered: Physics, Chemistry, Biology

Qualifying Marks:

General: 50th percentile

OBC/SC/ST: 40th percentile

PwD: 45th percentile

Only NEET-qualified candidates are eligible to apply for MBBS admission.

2. Check Eligibility Criteria

Before applying for counseling, ensure that you meet the eligibility requirements:

Age: Minimum 17 years by 31st December 2025

Education: 10+2 with Physics, Chemistry, Biology/Biotechnology, and English

Minimum Marks:

UR: 50% aggregate in PCB

SC/ST/OBC: 40%

PwD: 45%

Nationality: Indian citizens, NRIs, OCIs, PIOs, and foreign nationals can apply

3. Participate in Counseling – AIQ & State Quota

Once NEET results are declared (likely in June 2025), admission is done via two main counseling streams:

a. All India Quota (AIQ) – 15% Seats

Conducted by: Medical Counseling Committee (MCC)

Covers: Central institutes, AIIMS, JIPMER, deemed universities, and ESIC colleges

Open to candidates from all states

b. State Quota – 85% Seats

Conducted by: Respective State Counseling Authorities

Covers: State government & private colleges

Generally requires state domicile for eligibility

Each counseling round typically includes:

Online registration

Payment of counseling fee

Choice filling & locking

Seat allotment

Document verification

Reporting to the allotted college

4. Apply to Deemed & Private Universities (If Desired)

If you're aiming for deemed universities or private medical colleges, you must register under MCC’s counseling (for deemed) or your state counseling portal (for private colleges).

Private and deemed institutions usually have higher fees, but also offer greater seat availability.

5. Round-wise Counseling (2025 Updates)

The counseling process happens in multiple rounds to fill vacant seats:

• Round 1:

Initial seat allotment based on NEET rank and preferences.

• Round 2:

Fresh choices allowed; candidates can upgrade their seats.

• Mop-Up Round:

Conducted for remaining vacant seats after the first two rounds.

• Stray Vacancy Round:

Final round conducted by colleges for unfilled seats.

🆕 2025 Update: MCC and many states may introduce AI-based seat allotment tools and digital document verification systems for faster and transparent admissions.

Documents Required for MBBS Admission

Keep the following documents ready (original + photocopies):

NEET 2025 Admit Card and Scorecard

Class 10 & 12 Mark Sheets and Passing Certificates

Birth Certificate

Caste Certificate (if applicable)

Domicile Certificate (for state quota)

Identity Proof (Aadhaar/PAN/Passport)

Passport-size photographs

Provisional allotment letter

Migration/Transfer Certificate

Character Certificate

MBBS Admission Through AIIMS & JIPMER – What’s New?

Since 2020, AIIMS and JIPMER also admit students via NEET-UG. There is no separate entrance test anymore. These institutions are part of the MCC counseling and are among the top-ranked colleges in India.

Fee Structure Overview (2025)

Type of CollegeAnnual Fees (Approx.)Government Colleges₹10,000 – ₹1.5 lakhPrivate Colleges₹7 – ₹20 lakhDeemed Universities₹10 – ₹25 lakh+AIIMS/JIPMER₹1,500 – ₹6,000

Important Dates – MBBS Admission 2025 (Tentative)

EventExpected TimelineNEET 2025 ApplicationJan–Feb 2025NEET 2025 Exam DateMay 2025NEET Result DeclarationJune 2025MCC Counseling (AIQ/Deemed)June–July 2025State Counseling StartsJuly–August 2025Mop-Up/Stray RoundsAugust–September 2025Academic Session BeginsOctober 2025

Final Thoughts

The MBBS admission process in India for 2025 is structured yet highly competitive. A high NEET score significantly boosts your chances of landing a seat in a reputed government or central institute. However, with proper planning and timely registration in the right counseling rounds, even moderate NEET scorers can secure private or deemed university seats.

Stay updated with official websites such as nta.ac.in (for NEET) and mcc.nic.in (for AIQ counseling), and the portals of respective state counseling authorities.

With early preparation, awareness of the process, and a strategic approach, your dream of becoming a doctor in India can become a reality in 2025.

[diveshsingh12]

Edusquare Se Lo NRI Quota Admission Mein Expert Support

NRI Quota Admission in India refers to a special allocation of seats in medical, dental, and other professional colleges for Non-Resident Indians (NRIs), Overseas Citizens of India (OCIs), and Persons of Indian Origin (PIOs). These seats are reserved specifically to support students of Indian origin living abroad, giving them a fair chance to study in their homeland without going through the same cut-throat competition as resident Indian students.

Typically, 15% of the seats in private medical and dental colleges across India are reserved under the NRI quota. This route is especially beneficial for students who may not secure admission through the general merit list but have the academic credentials and financial resources to qualify under the NRI quota.

Why Choose Edusquare Consulting?

With a decade of experience in the education consultancy sector, Edusquare Consulting has earned a reputation for transparency, credibility, and student-centric services. Here's why students and parents trust Edusquare for NRI Quota Admission in India:

1. Personalized Guidance

Every student’s profile is different. Our team at Edusquare offers personalized admission counseling tailored to your academic background, preferred location, and budget. We assess eligibility, suggest suitable colleges, and walk you through every step of the admission process.

2. End-to-End Support

From document verification and eligibility checks to college shortlisting and final admission, Edusquare handles it all. We provide comprehensive support for NRI Quota Admission in India, ensuring that you don’t miss out on deadlines or face last-minute hassles.

3. Trusted Network of Colleges

We have tie-ups and long-standing relationships with top private medical colleges across India. This allows us to provide accurate information, real-time updates on seat availability, and genuine admission guidance for students aspiring to study under the NRI quota.

4. Transparency and Ethics

At Edusquare, we maintain 100% transparency in our process. There are no hidden fees, false promises, or misleading information. We believe in ethical practices and long-term trust-building with our clients.

Eligibility Criteria for NRI Quota Admission in India

To apply for NRI Quota Admission in India, candidates must fulfill certain eligibility conditions:

The candidate should be an NRI, OCI, or PIO, or have a parent/guardian who is an NRI.

Must have completed Class 12 with Physics, Chemistry, Biology, and English.

A minimum of 50% marks in PCB subjects is usually required (may vary by state/college).

Must have appeared and qualified in NEET-UG for MBBS/BDS admissions.

Popular Medical Colleges Offering NRI Quota Seats

Some of the reputed colleges in India offering NRI Quota Admission include:

Kasturba Medical College (Manipal)

SRM Medical College (Chennai)

Amrita Institute of Medical Sciences (Kochi)

Dr. DY Patil Medical College (Pune)

Kalinga Institute of Medical Sciences (Bhubaneswar)

JSS Medical College (Mysore)

Edusquare provides exclusive guidance for admissions in these and many more MCI-approved institutions.

Documents Required for NRI Quota Admissions

The following documents are typically needed during the admission process:

NEET-UG scorecard

Passport and visa copies (student/parent)

Class 10th and 12th mark sheets

Relationship proof with the NRI sponsor

NRI status proof of the sponsor (bank statement, employment certificate, etc.)

Edusquare helps you collect, verify, and submit these documents in the correct format to avoid rejection or delays.

How Edusquare Simplifies the Admission Process

Getting into a top medical college through NRI Quota Admission in India can be competitive and confusing without expert guidance. At Edusquare, we ensure you:

Stay updated on NRI quota counseling dates and seat matrices.

Get priority assistance for college selection based on NEET score and budget.

Avoid admission scams and unofficial agents.

Have peace of mind throughout the process.

Let Edusquare Be Your Admission Partner

At Edusquare Consulting, we don’t just secure your admission — we pave your path to a successful career in medicine. We aim to make NRI Quota Admission in India simple, transparent, and accessible for every eligible student dreaming of studying in India.

Whether you're an NRI parent seeking clarity or a student hoping to return to India for your studies, Edusquare guides you at every step.

Ready to begin your NRI Quota Admission journey in India? Contact Edusquare Consulting today and take the first step towards your dream medical career.📞 +91-9156899370 📧 edusquare@edusquareconsulting.com 📍 B-2/32, UG Floor, Sector-6, Rohini, Delhi – 110085

[wagnerengineer]

Wagner Engineering USA

Wagnerengineer is your trusted partner in electronic and software product development. Located in Chicago, we specialize in delivering fully integrated engineering solutions that help businesses bring innovative ideas to life. Whether you're building a connected device, developing embedded systems, or scaling cloud infrastructure, we deliver the precision and reliability your project demands.

Our expert team works across every stage of the product development lifecycle—from concept and design to prototyping, deployment, and long-term support. With services tailored to your needs and a commitment to technical excellence, we provide more than engineering—we deliver results.

What We Do

Wagner Engineering USA offers a full suite of services designed to support product innovation from the ground up. We combine experience in electrical engineering, embedded software, full-stack development, and cloud architecture to deliver smart, scalable solutions that work seamlessly together.

PCB Design

Printed circuit boards are the foundation of any electronic system. Our team designs reliable, manufacturable PCBs that power your hardware with efficiency and durability. From single-layer prototypes to complex, multilayer boards, we engineer for long-term performance and smooth production.

Embedded Firmware Development

Embedded systems demand fast, efficient, and stable firmware. Our engineers write secure and optimized code that interfaces perfectly with your hardware. Whether it's powering sensors, managing connectivity, or enabling advanced logic, we develop firmware that makes your device smarter and more capable.

Software Development

Great software brings hardware to life. We build customized software applications for desktop, mobile, and web platforms—designed to fit your product, workflow, and user needs. From control panels to user interfaces to integrated tools, our software supports usability, reliability, and scale.

Cloud & IoT Infrastructure

Connectivity is the backbone of today’s smart devices. We develop cloud-based systems and IoT platforms that allow your product to collect data, communicate remotely, and scale over time. Our cloud solutions are secure, flexible, and designed to grow with your business.

Why Clients Choose Wagner Engineering

We don’t just write code or design boards—we solve problems. Our process is built around understanding your goals and delivering the exact technology to help you achieve them.

Here’s what sets Wagner Engineering USA apart:

Complete Engineering Capabilities From circuit design to cloud deployment, our team offers a full range of skills under one roof.

Tailored, Scalable Solutions We adapt our services to your project—building only what you need, with flexibility for the future.

Reliable Communication We believe in transparency. Expect regular updates, clear timelines, and honest conversations throughout.

Quality-Focused Delivery Every product is tested thoroughly to meet performance, safety, and compliance standards.

End-to-End Partnership We support your product from the first idea to market launch and beyond—offering technical guidance at every step.

Industries We Serve

Our team supports a wide range of industries, from emerging startups to established brands. We understand the unique challenges and regulatory requirements of different markets and build solutions accordingly.

Consumer Electronics Creating innovative, user-friendly devices built for performance and mass production.

Medical & Health Devices Engineering high-precision electronics and software that support safe, effective healthcare solutions.

Industrial Automation Developing embedded controls and cloud systems for smart manufacturing and process automation.

Smart Home & IoT Building cloud-connected systems that enable seamless control, automation, and monitoring of devices.

Automotive & Mobility Delivering robust, embedded systems for advanced vehicle functions and integrations.

Robotics & Manufacturing Tech Powering intelligent machines and tools with custom electronics and control software.

How We Work

Every successful product starts with a clear, focused process. At Wagner Engineering USA, we take a structured yet flexible approach that adapts to your needs:

Consultation & Discovery We start by learning your goals, product vision, and technical challenges.

Design & Development Our team builds your solution—from schematics and code to user interfaces and cloud systems.

Testing & Validation We rigorously test your product for performance, compliance, and real-world use.

Launch & Support Once your solution is ready, we help bring it to market and provide long-term support as it grows.

Let’s Build Something Great

Whether you're developing a prototype or scaling production, Wagner Engineering USA is ready to help. Our engineering team offers the precision, creativity, and problem-solving skills needed to move your project forward.

We’re here to collaborate, innovate, and engineer what’s next—for your business and your customers.

Wagnerengineer is committed to transforming your ideas into dependable, cutting-edge products that excel in today’s fast-evolving marketplace. By focusing on tailored solutions, technical mastery, and close collaboration, we help your business unlock its full potential through innovative engineering. Choose Wagner Engineering USA as your partner for expert guidance and solutions that deliver real, lasting impact.

[heippeople]

Complete Guide to Career Options: After 12 Science Courses List with Top Choices in 2025

Completing 12th grade in the science stream opens the door to a wide range of career opportunities. Whether you're from the PCB (Physics, Chemistry, Biology) or PCM (Physics, Chemistry, Mathematics) background, there are numerous high-paying, in-demand, and future-ready fields to choose from. If you’re searching for the best after 12 science courses list, this guide is here to give you a detailed breakdown of options, career scope, and what suits your interests best.

🔹 Why Science Stream Offers a Wide Career Scope?

Science students are at an advantage because they can switch to commerce or arts fields if they wish — but students from other streams can’t always shift into science. From medicine and engineering to research and business, the science stream is a launchpad to almost every career path.

📘 After 12 Science Courses List: Complete Overview

Here's the most updated after 12 science courses list for 2025, divided into Medical, Non-Medical, and Other emerging fields.

🔬 Medical (PCB) Stream Courses

MBBS (Bachelor of Medicine & Bachelor of Surgery)

Duration: 5.5 years

Career: Doctor, Surgeon, Specialist

Entrance Exam: NEET

BDS (Bachelor of Dental Surgery)

Duration: 5 years

Career: Dentist, Oral Surgeon

BAMS (Ayurvedic Medicine)

Duration: 5.5 years

Career: Ayurvedic Doctor, Wellness Expert

BHMS (Homeopathy)

Duration: 5.5 years

Career: Homeopathic Doctor

B.Sc. Nursing

Duration: 4 years

Career: Nurse, Hospital Management

BPT (Bachelor of Physiotherapy)

Duration: 4.5 years

Career: Physiotherapist, Sports Therapy Expert

Pharmacy (B.Pharm / D.Pharm)

Duration: 4 years / 2 years

Career: Pharmacist, Drug Researcher

B.Sc. Biotechnology / Microbiology / Biochemistry

Duration: 3 years

Career: Researcher, Lab Analyst, Geneticist

Veterinary Science (BVSc)

Duration: 5.5 years

Career: Animal Doctor, Livestock Consultant

⚙️ Engineering & Non-Medical (PCM) Stream Courses

B.Tech / B.E. (Engineering)

Popular Branches: Computer Science, Mechanical, Civil, AI, Robotics

Entrance Exam: JEE Main, State CET

B.Arch (Architecture)

Duration: 5 years

Career: Architect, Urban Planner

Exam: NATA

B.Sc. in Physics / Chemistry / Maths / IT

Duration: 3 years

Career: Data Scientist, Analyst, Educator

Merchant Navy / Nautical Science

Duration: 3–4 years

Career: Marine Engineer, Ship Officer

Commercial Pilot Training

Duration: 18–24 months

Career: Pilot

Requirement: Physics & Maths in 12th

💻 Emerging & Interdisciplinary Courses

BCA (Bachelor of Computer Applications)

Duration: 3 years

Career: Software Developer, IT Analyst

B.Sc. in Data Science / AI / Cybersecurity

Duration: 3 years

Career: Data Analyst, AI Engineer, Security Expert

Forensic Science

Duration: 3 years

Career: Crime Lab Analyst, Legal Advisor

B.Sc. Agriculture / Forestry / Horticulture

Duration: 4 years

Career: Agri-Scientist, Food Technologist

Environmental Science / Oceanography / Geology

Duration: 3 years

Career: Environmental Officer, Researcher

🎓 Professional Courses Open to All Science Students

Hotel Management

Mass Communication & Journalism

Fashion Designing / Interior Designing

BBA (Bachelor of Business Administration)

Law (Integrated BA-LLB)

These options are excellent for science students who wish to explore beyond the technical field and enter creative or business-related domains.

📌 How to Choose the Right Course?

Here’s how to filter your after 12 science courses list and choose the right one:

Interest & Passion – Don’t choose MBBS or B.Tech just because others are doing it. Ask yourself what truly excites you.

Entrance Requirements – Understand the exams you need to crack (like NEET, JEE, NATA).

Career Scope – Choose fields with long-term growth and stability.

Budget & Duration – Consider how long the course is and whether it fits your financial situation.

✅ Final Words

There’s no doubt that science opens up more career options than any other stream. But the best course is the one that matches your passion and strengths. Use this detailed after 12 science courses list as a starting point and then research deeper based on your interest. Whether it's becoming a doctor, an engineer, a data scientist, or even a pilot — the future is full of opportunities for science students.

[tessolve12]

Test Engineering For Ai And Edge Devices: Power, Performance, And Precision

The rise of AI and edge computing has caused major changes in the technology sector. With AI being used in edge devices, a new area of challenges has appeared in engineering. Today’s edge equipment such as robots, smartphones and devices used across industry, has to do demanding AI tasks using as little energy, keeping them cool and ensuring real-time performance as ideal as possible. The switch to intelligent edge devices means that quality engineering services must be highly capable to support their operations in many different environments and scenarios.

To test AI-enabled edge devices, specialists must understand hardware design, software validation, power improvement and AI algorithm checks. When companies focus on innovative products, strong product engineering services must address the issues in testing those products to ensure success. The article looks at the main aspects, rules and best practices in testing AI and edge applications, concentrating on saving power, achieving optimal performance and checking precision.

The Unique Testing Challenges of AI Edge Devices

Test methods for edge AI devices cannot be replaced with approaches used in earlier AI systems. In contrast to regular embedded systems, devices with AI at the edge use neural networks and machine learning and must function properly within the limited features of hardware. Most of the time, these devices call for particular quality engineering to verify how they function under different scenarios.

It is important to effectively test the AI software as well as the overall structure of the hardware it uses at the same time. Given how AI accelerators, memory and power management systems work together, proper testing methods should be used. PCB design service providers and test engineers ought to collaborate to make sure that the platforms are fully tested and easy to mass-produce.

Moreover, edge AI devices are often used in places where the connection is uncertain, power is unstable and the work they do can vary greatly. The role of test engineering includes testing devices for proper function under all the varieties of dynamic situations in which they may be used. For this reason, it is important to check how the software update functions, the security system and what happens during recovery when the device is at the network edges.

Power Efficiency Testing for AI Edge Devices

The amount of power consumed is very important for edge AI devices, especially in situations where energy is in short supply or devices rely on batteries. When testing these products, it is important to design power profiling methods that review energy consumption in different modes and while running varied programs.

Dynamic Power Profiling

Dynamic power profiling techniques are used by advanced quality engineering services to analyze how power is used during the inference process of AI. It requires performing high-resolution power measurements on different AI tasks being processed by the device so that engineers can locate excessive power use and find ways to improve performance. New test systems use precise instruments to monitor power in various domains, revealing the role that each part of the system plays in using power.

Thermal Management Validation

The better an edge AI device can manage heat, the more efficient it is with power. Product engineering services ought to verify that continuous usage of a device does not cause damage from overheating. Here, we must test the options available to dissipate heat, observe how the device cools itself down and see that the thermals never influence performance too much. The trend of making devices smaller and giving them more powerful processors makes it necessary to conduct thermal testing.

Battery Life Certification

Battery-powered AI edge devices have to be checked to ensure the battery can satisfy the set usage patterns. To do this, there should be automated tests that cover various situations and track power use, helping to estimate the battery life. By simulating a lot of usage in less time, specialized test frameworks allow the battery to be saved without harming key elements of AI in the system.

Performance Validation for Edge AI Systems

Edge AI systems should be tested to ensure their computational abilities and ability to respond instantly under all possible operating situations. The importance of performance means it’s essential to validate this when using effective quality engineering services.

Benchmarking AI Inference Speed

They rely on standard checks to determine how fast different AI models process different types of inputs. Such benchmarks should represent tasks that are usually found in the real world and deliver the same results whenever you run them. It is possible for advanced test automation frameworks to carry out hundreds of benchmarks and provide heatmaps showing where optimizations should be made and confirming the benefits of changes made after every project phase.

Latency and Responsiveness Testing

In edge AI applications, it is necessary that the work is performed quickly and predictably. It is important to measure latency from acquiring input all the way to taking some action by the robot. This calls for identical devices that measure the system’s reactions at high accuracy, with the difference down to a microsecond. Special test points and circuits designed into PCBs by experts can permit testing of the device without interrupting its regular operation.

Testing Edge AI Devices as a System

While testing components is helpful, the whole device should be tested as part of an entire system in actual usage settings. Using this method, all systems are able to function effectively in real-life situations.

Testing the entirety of the software

It is important for product engineering services to build thorough test cases that run the system from its sensors to its AI and outputs. During end-to-end testing, data travels through every section of the system and timing is ensured at each step of processing. Automated testing allows devs to regularly check their work and let them know, fast, when an error occurs.

Conclusion

As more AI becomes implemented in edge devices, engineers’ test methods should improve as well. Recent advancements in quality engineering involve solving the unique problems of ensuring how much power is used, the system’s overall performance and accuracy in modern technologies. If a company relies on wider product engineering services and advanced PCB design, it will have an edge over other companies in providing reliable AI edge devices that the market requires.

[careerkickservice]

NEET Counselling 2025: Important Dates, Procedure, Registration Fees, Eligibility, Security Fee, Cut-off, and Refund

The NEET 2025 counselling will be conducted in numerous rounds with an additional Special Stray Vacancy Round to fill all medical seats, including Deemed Universities and AIIMS seats. The vacant seats in each round will be finalized, and seats will be allotted to candidates by merit, preference, and availability. The NEET counselling rounds will be conducted by the Medical Counselling Committee (MCC), and they will include seat allotment, choice filling, and document verification. Keep yourself aware of the official updates of NTA and MCC to have a seamless NEET UG Counselling 2025.

Important Dates for NEET Counselling 2025

The NEET UG 2025 exam will be held on May 4, 2025, and the results will be declared by June 14, 2025. After this, the NEET Counselling 2025 will begin in July or August 2025, allowing candidates to get admission into undergraduate medical and dental courses in India.

NEET Counselling Structure: Centralized and State-Level Admissions

The NEET counselling process is divided into central and state-level procedures. The central counselling is conducted for 15% All India Quota (AIQ) seats, covering admissions to MBBS, BDS, and BSc Nursing courses at Central and Deemed Universities. In contrast, the remaining 85% of state quota seats are managed by respective State Authorities for admissions to medical colleges within their states.

UG Counselling:

15% All India Quota seats MBBS/ BDS Seats of States (participation of the Union Territory of J&K is subject to their contribution of seats),

100% MBBS/ BDS Seats of BHU,

100% MBBS Seats of AIIMS across India,

100% JIPMER seats (Puducherry/ Karaikal),

100% AMU

85% of the State Quota seats of DU/I.P. University (VMMC/ ABVIMS/ESIC Dental),

100% -Faculty of Dentistry (Jamia Millia Islamia) along with 5% internal Quota of Jamia students

15% IP quota seats of ESIC.

NEET 2025 Counselling Process:

To register for NEET 2025, candidates must visit the MCC website and fill in their details, like NEET 2025 registration number and academic information.

To complete the counselling process, candidates are required to pay the registration fee, which is divided into two parts: a non-refundable fee and a refundable fee.

During the Choice Filling and Locking stage, candidates can select their preferred colleges and courses, with the option to add, delete, or rearrange their choices. They must lock their final selections before the deadline.

NEET 2025 seat allocation is determined by the candidate’s All India Rank (AIR) and their chosen preferences. The MCC will release the seat allotment list on its official website.

Candidates must report to the assigned college for document verification. Failure to do so will result in the cancellation of their allotted seat.

NEET Counselling 2025 Eligibility Criteria

To be eligible to participate in NEET UG 2025 counselling, candidates need to meet the following requirements:

Candidates must have passed Class 12 with Physics, Chemistry, and Biology/Biotechnology as core subjects with the following minimum marks:

General category: Minimum 50% aggregate in PCB

Reserved category (SC/ST/OBC): Minimum 40% aggregate in PCB

PwD candidates (General/EWS): Minimum 45% aggregate in PCB

They should be eligible for the National Eligibility cum Entrance Test (NEET)

They need to be registered on the MCC official website

All the candidates, including UT of J&K candidates, are eligible to attend counselling for AIQ seats and deemed universities.

Reservation Policy (as per Central Government norms)

NEET 2025 Counselling Expected Cut-Off

Category-wise NEET 2025 Govt. Medical College Cut-off Trend Analysis (AIQ 15%)

NEET UG 2025 Counselling Rounds

NEET 2025 counselling will be conducted in four main rounds:

Round 1

Round 2

Round 3 / Mop-up Round

Stray Vacancy Round

Following these initial four rounds, additional counselling rounds may be conducted if seats remain vacant. The total number of rounds may increase based on the availability of unfilled seats.

NEET Counselling Security Fee Refund

If the seat is allotted, the security deposit will be adjusted against the first-year fees.

If no seat is allotted, the full amount of the security deposit will be refunded to the original payment account.

Refund of the Security amount will only take place once all rounds of Counselling have been completed. MCC will publish the completion counselling notification on their portal.

The security deposit will be refunded within 15 days of the notification, with the entire process to be completed within 30 days of the notification.

Documents Required for NEET Counselling 2025

The following documents are required for NEET Counselling 2025 for verification and admission purposes.

NEET 2025 Admit Card

NEET 2025 Scorecard

Class 10th & 12th Mark Sheets

Identity Proof (Aadhar/PAN/Passport/Voter ID)

Passport-size Photographs (8 copies)

Caste Certificate (if applicable)

Disability Certificate (if applicable)

For NRI candidates, the following documents are mandatory:

A copy of the sponsor’s passport and an embassy certificate.

A sponsorship affidavit stating the sponsor’s commitment to bear the expenses for the entire duration of study, and

A relationship affidavit establishing the candidate’s relationship with the sponsor.

Important Points to Note for NEET Counselling 2025

Fresh registrations are permitted during Round 1, Round 2, and the Mop-up Round of NEET counselling. However, once a seat is allotted and accepted in Round 2, candidates are not eligible for any further upgrades or changes.

Those who choose to reject their Round 2 seat must re-register for the Mop-up Round, which will lead to the loss of their security deposit.

Conclusion:

The NEET counselling 2025 is an important process for candidates who are trying to get admissions through the national-level entrance exam. NEET counselling is organized by the MCC in a centralized as well as state-level process. Each stage of the NEET counselling process is important therefore, candidates need to plan the essential steps thoroughly, such as registration, choice filling, seat allotment, verification, and always keep in mind official updates. Candidates will need to understand eligibility criteria, the layout of fees, rules for refunds. Overall, being organized and informed will help candidates have a smooth counselling experience, while maintaining the best chance for securing a seat in their institute of choice.

If you’re looking for the best Admission-Consultants in Kakadeo and Gr. Noida, let Careerkick guide your medical career journey with expert NEET counselling that’s accurate, timely, and completely personalized.

[adamm125]

Your Complete Guide to BSc Nursing Admission 2025: Eligibility, Process & Top Colleges

Are you planning to build a career in nursing? If yes, then this is the perfect time to start preparing for BSc Nursing Admission 2025. Nursing is not just a noble profession but also one of the most in-demand careers in the healthcare sector globally. In this guide, we’ll walk you through all the important details regarding BSc Nursing admissions for the upcoming academic year.

📌 What is BSc Nursing?

The Bachelor of Science in Nursing (BSc Nursing) is a 4-year undergraduate course that equips students with theoretical and practical knowledge in nursing. The course is regulated by the Indian Nursing Council (INC) and prepares students for various clinical and non-clinical roles in the healthcare industry.

🗓️ BSc Nursing Admission 2025: Key Highlights

Course Duration: 4 years

Eligibility: 10+2 with PCB (Physics, Chemistry, Biology) and English with at least 45-50% marks

Entrance Exams: NEET-UG, AIIMS BSc Nursing, JIPMER, state-level exams

Application Mode: Online

Start of Application Process: Expected from January–March 2025 (varies by institution)

🎯 Eligibility Criteria for BSc Nursing Admission 2025

Must have completed 10+2 or equivalent with Physics, Chemistry, and Biology.

Must be at least 17 years of age by December 31, 2025.

Minimum aggregate score of 45–50% in PCB subjects.

Some colleges may require English as a compulsory subject.

📝 How to Apply for BSc Nursing Admission 2025?

The admission process generally includes the following steps:

Online Registration on the official website of the college or entrance exam portal.

Entrance Exam (if applicable): Prepare for and appear in NEET, AIIMS, or state-level entrance exams.

Merit List/Counseling: Based on exam scores or 12th-grade marks, merit lists are released.

Document Verification: Candidates must provide original documents for verification.

Final Admission & Fee Payment

🏥 Top Colleges for BSc Nursing in India 2025

All India Institute of Medical Sciences (AIIMS), Delhi

Christian Medical College (CMC), Vellore

Armed Forces Medical College (AFMC), Pune

PGIMER, Chandigarh

Manipal College of Nursing, Manipal

SNDT Women's University, Mumbai

📚 Entrance Exams to Watch for in 2025

NEET UG 2025

AIIMS BSc Nursing Entrance Exam

JIPMER Nursing Entrance

State CETs like MHT CET, WBJEE, etc.

Make sure to check individual college websites for specific dates and requirements.

🔎 Final Tips for BSc Nursing Aspirants

Start preparing for entrance exams early.

Stay updated on application dates and notifications.

Keep all documents ready including 10th & 12th mark sheets, identity proof, and passport-size photographs.

Follow only official websites for accurate information.

Conclusion:

With a structured plan and the right resources, securing a seat in a top BSc Nursing program is completely achievable. Stay ahead by staying informed. Bookmark this page for updates on BSc Nursing Admission 2025 and share it with friends who are aspiring to enter the nursing field.

[akshitasmcet001]

Get to know the Best College in Rajasthan in Electronics & Communication!

Introduction

Electronics & Communication Engineering (ECE) isn’t just a degree—it’s the backbone of the modern digital world. From smartphones and satellites to smart cities and autonomous vehicles, ECE powers the innovation around us. But here’s the catch: your success in this dynamic field largely depends on where you study. So, which is the Best Electronics & Communication Engineering College in Rajasthan? Buckle up as we take you on a deep dive!

What is Electronics & Communication Engineering (ECE)?

ECE is the fusion of two rapidly evolving domains—electronics and communication systems. It teaches you how electronic devices are built and how data travels through them.

Core Subjects You’ll Study:

Analog & Digital Electronics

Microprocessors & Microcontrollers

Communication Systems

Signal Processing

VLSI Design

Embedded Systems

Internet of Things (IoT)

Skills You Gain:

Problem-solving & analytical thinking

Circuit design & simulation

Coding in C/C++/Python

Communication protocols & networking

Career Scope After ECE

Let’s talk big picture. What happens after you graduate?

Industries That Hire ECE Grads:

Telecom

Consumer Electronics

Aerospace & Defense

IT & Software

Healthcare Devices

Automation & Robotics

Govt vs. Private Sector:

PSUs like ISRO, DRDO, and BEL are dream destinations in the government sector. Giants like Infosys, Qualcomm, and Intel come knocking in the private sector.

Future-Forward Careers:

IoT Developer

Embedded Systems Engineer

AI & ML Engineer

VLSI Designer

Network Security Specialist

Key Features of a Top ECE College

Choosing the right college is like choosing the right gear for a long journey. Here’s what to look for:

Accreditation & Recognition

Top ECE colleges in Rajasthan should be AICTE-approved, NBA-accredited, and affiliated with reputed universities.

Industry-Ready Curriculum

Updated syllabus, practical-oriented labs, and elective options to explore emerging tech trends.

Labs & Research

Advanced labs with FPGA kits, simulation tools, PCB design software, and robotics stations.

Internships & Placements

Look for colleges that partner with tech giants, provide hands-on internships, and have a proven placement track record.

The Best College in Rajasthan for ECE Revealed

One institution consistently turns heads with its stellar faculty, modern infrastructure, and top-notch placements—Stani Memorial College of Engineering & Technology (SMCET), Jaipur.

Why SMCET Stands Out:

20+ years of excellence in technical education

Personalized mentorship programs

Regular workshops with companies like TCS, Wipro, and Siemens

Faculty Excellence:

Ph.D.-qualified professors, industry veterans, and supportive teaching staff who make learning engaging and career-focused.

Academic Curriculum Breakdown

Year 1:

Engineering Basics

Applied Physics & Mathematics

Programming Fundamentals

Years 2 & 3:

ECE Core Subjects

Mini Projects & Lab Work

Industrial Visits

Final Year:

Specializations (AI, IoT, VLSI)

Capstone Projects

Internship + Final Placement

Infrastructure That Inspires Innovation

At SMCET, infrastructure isn't just about buildings—it’s about experiences.

ECE Labs:

Digital Signal Processing Lab

Communication Systems Lab

Embedded Systems & IoT Lab

Beyond Labs:

Tech-enabled classrooms

Digital library with IEEE journals

Entrepreneurship incubation center

Campus Life Beyond the Classroom

SMCET believes in all-around development.

Clubs & Societies:

Robotics Club

Coding Club

ECE Innovation Circle

Cultural & Sports Fests:

Annual events like “Technotsav” and inter-college tournaments make life vibrant!

Placement Powerhouse

Top Recruiters:

Infosys

TCS

Wipro

Ericsson

Bosch

Placement Highlights:

90 %+ placement rate in ECE

Industry-aligned training from the 3rd year

Alumni in Fortune 500 companies

Admission Process

Eligibility:

10+2 with Physics, Chemistry & Math

Min. 45-50% marks

Entrance Exams:

REAP (Rajasthan Engineering Admission Process)

JEE Main score preferred for merit

How to Apply:

Online/offline application via the official website

Keep documents like mark sheets, photo ID, and entrance exam score ready

Scholarships & Financial Aid

Merit-Based Scholarships:

For high-performing students in the 12th grade and entrance exams

Govt Schemes:

AICTE Pragati (for girls)

Saksham (for differently-abled students)

Rajasthan state scholarships

What Students & Alumni Say

Choosing SMCET was the best decision for my ECE career. The faculty genuinely care about your growth!” — Priyanka, ECE 2022

“From lab work to internships, everything is hands-on and industry-relevant.” — Aman, ECE Alumni at Ericsson.

Why Rajasthan is a Rising Tech-Edu Hub

Rajasthan isn’t just about forts and deserts anymore. With cities like Jaipur becoming education & IT hubs, studying here offers the perfect mix of tradition, innovation, and career opportunities.

How to Prepare for a Future in ECE

Stay updated with trends like AI, 5G & VLSI

Participate in tech fests and hackathons

Take online certifications in embedded systems or IoT

Practice coding regularly on platforms like HackerRank

Conclusion

If you’re passionate about technology, innovation, and creating real-world impact, then ECE is your gateway. And when it comes to pursuing it in Rajasthan, Stani Memorial College of Engineering & Technology, Jaipur, sets the gold standard. From faculty and labs to placements and student life, it ticks every box.

So, ready to power your future with circuits and code? Choose excellence. Choose SMCET.

FAQs

Q1: Is Electronics & Communication Engineering a good career choice in 2025 and beyond?

Yes! With tech evolving rapidly, ECE offers roles in AI, IoT, robotics, and telecom industries that are booming globally.

Q2: Which is the best private college in Rajasthan for ECE?

Stani Memorial College of Engineering & Technology (SMCET), Jaipur, is widely recognized for its excellence in ECE.

Q3: What is the average placement package in ECE?

Depending on skills and internships, ECE graduates can expect packages ranging from ₹3.5 to ₹10+ LPA.

Q4: Can I pursue higher studies after ECE?

Absolutely. You can go for M.Tech, MBA, or MS abroad in specializations like VLSI, AI, or Communication Systems.

Q5: Does ECE require coding?

Yes, but not just coding—ECE combines hardware with software. Languages like C, Python, and MATLAB are often used.