#R50/5 | Explore Tumblr Posts and Blogs

theinsidiousdice · 6 months

Text

She was the savior, or so they said.

She would bring peace to the world. A wave of her hand would calm even the most hardened of hearts.

She did bring peace to the world, in her way. None of her creators would live to see it, though some would have said that was for the best.

DESIGN SPECIFICATIONS

█████ v6

Processor: Atkinson G72-5601 x4

Memory: 128 EL – Atkinson M133 x2

Storage: 2 XL – Atkinson R50 x2

OS: AtOS 5 Custom-Learning

Connectivity: Atkinson XW 95

Chassis: █████ ████████ ██

ACCESSORIES

Marshall ACCELERATOR

Marshall CHAMPION

Marshall LIGHTBRINGER

Marshall ZT566

Quicksilver ARGOS

Quicksilver NEEDLE

S/LTR 5155

S/LTR 6700

S/LTR 6701

S/LTR 6702

S/LTR 6703

S/LTR 9860

Ace KIL-261 CUSTOM

Prismatic ALPHA

Prismatic EARTHQUAKE

Prismatic TYPHOON

XCircuit DUODECIM

XCircuit SEDEC

Octave PRIDE

Octave CONVERGENCE

…

[page 1 of 13]

“I’m… so sorry, Elise. I don’t know what else to do. Please, just speak to me. I can’t let you go without hearing your voice once more. Say something. Wake up. Please… I’d do anything to bring you back. You showed so much promise… I’d hoped that a spirit like yours could save the world one day. But now, now you’re…”

ALLIANCE WEAPON NEARS COMPLETION

By Deci Syre

3d11mo2106y

STONESIDE – A top-secret Alliance weapon, said to be able to put an end to the St. Vely War, is in its final stages of production, say high-level sources in Stoneside.

The St. Vely War, also called the Final War by some for its sheer scope and scale, began with a territory dispute between Attalan and Tiyam over the duchy of St. Vely, located on the border between the two countries. Though ownership of St. Vely has been a point of contention between the governments of Attalan and Tiyam since the Chora Agreement in 1401y, the St. Vely War marks the first time hostilities have exploded to this degree. In the six months since the Gran Marismo Offensive, nearly every government in the world has sided with either Attalan or Tiyam, with a few notables lending their support to St. Vely’s push for independent statehood.

Last week saw the dramatic reveal of the Coalition’s newest battle tank, the H6-250. The skirmish along the Winsome Straight was ended in decisive fashion as Tiyam’s fleet of H6-250s laid waste to Attalan’s forces. At the time, this was seen as a turning point of the war, but with the news that the Alliance has their own super-weapon nearly ready to go, the conflict may still yet live for some time…

“Atkinson, we’ve got to have this ready to go ASAP. Give me some good news for a change.”

“The chassis is fine. All the… all the ‘add-ons’, as Miles so ghoulishly calls them, are operative.”

“That IS good news. So it’s ready to go?”

“Not quite. As it is right now, the chassis is just a- a body. You could remote control it into a warzone and it could cause damage, sure, but not like how you want.”

“What’s the roadblock, then?”

“I can’t get the AI online. The whole point behind this weapon is that it’s supposed to be able to think, to learn, to- to be able to make split-second decisions about the state of the battlefield.”

“I believe in you, doctor. You’re the finest mind we have. Make it work.”

“But sir, I- I can’t, not in the timeframe you’re asking. Something like this takes months. Years. If at all.”

“Nonsense, Atkinson. You’ve got plenty of time. In fact… am I remembering right? Your daughter is on life support in the medbay, correct?”

“Well, yes, sir, it’s Cronenberg’s syndrome, sir. I’m close to a breakthrough, and then she…”

“Consider that particular diversion of yours canceled. Nobody comes back from Cronenberg’s. We’ll unplug her and that’ll be the end of that. Et voila – much more time for you to work on our dear project.”

“Sir, wait-!”

A Treatise on the Applications of Neurological Anteromapping to Artificial Intelligence

M. Atkinson

Abstract

The use of artificial intelligence has stalled as efforts to move past the ‘language model’ phase have failed. Consequently, there is a need to view the growth of artificial intelligence from a different angle. To this end, I have designed a method to map a human brain onto an artificially-grown inert mass of tissue…

“Elise… please forgive me. I never meant for things to end this way. At least this way I might be able to look into your eyes one more time…”

ALLIANCE WEAPON CODENAME “L.E” TO MAKE APPEARANCE IN UPCOMING OFFENSIVE

By Deci Syre

12d12mo2106y

CODENAME L.E CLEARS BATTLEFIELD IN MINUTES

By Jacks B. Flippen

14d12mo2106y

COALITION ON THE RETREAT

By Noissone de Rhodes

14d12mo2106y

TIYAM POL WARNS AGAINST FURTHER USING CODENAME L.E

By Lescot Itton

15d12mo2106y

NEW AI ETHICS CONCERNS IN CODENAME L.E

By Deci Syre

16d12mo2106y

OPINION: SHOULD CODENAME L.E HAVE MORALS?

TIYAM HEAD OF MILITARY PROMISES NEW WEAPON WILL OUTDO L.E

CLASH OF TITANS: L.E TO MEET NEW TIYAM WAR MACHINE IN ‘NEW YEAR BRAWL’

EXPERTS WARN OF POSSIBLE FALLOUT OF ‘NEO ARMS RACE’

OPINION: DISABLE L.E’S ‘ETHICS LIMITER’

REP. SYMMONS: L.E WILL ‘WIPE THE FLOOR WITH ANY TIYAM TOY’

WHERE TO STREAM NEW YEAR BRAWL…

“Breaking news: it appears that codename L.E has indeed taken the field at Praeda Venator, the latest in a long line of fronts successfully broken by the experimental warbot. Though she – sorry, it – is no bigger than a human itself, it packs a punch. For more, we go to our correspondent in Praeda Venator, Algernon Florafour. Algie?”

“Thanks, Hoss. If you look behind me – steady with the camera, Quinton – you’ll see L.E approaching the clearing, backed by a collection of war machines from the world over. Though they represent the finest that the Alliance has to offer, every single one of them will be outshone by L.E today – I’m sorry, Hoss, it looks like Tiyam’s forces have arrived as well. Would you look at that…”

“Algie, that appears to be the new weapon Tiyam has been teasing. Is this correct?”

“Yes, Hoss, it sure is. I’ve never seen anything like this. It’s bigger than Brody Station. If you zoom in there, Quinton, you might be able to make out every single turret and cannon this thing has equipped. Hoss, if this thing extended all of its weapons at once, it’d look like a hedgehog.”

“Not to interrupt, Algie, but it looks like L.E is making a move.”

“It sure is! L.E’s AI is advanced enough that it only needed a split second to analyze the situation and pick out the appropriate strategy to completely destroy its foe. It’s flying straight up, high enough that I can barely see it any more… Quinton, do you see that light? Is it charging something up?”

“Algie, it looks as if…”

“Oh no. Quinton, run. Run! RUN!”

“Algie? Come in, Algie. What’s L.E doing? What’s happening-”

[finding signal…]

[signal lost]

…

Codename L.E ended the war.

Codename L.E ended the fighting.

Codename L.E ended the world.

Codename L.E ended itself.

And when she woke up days (months? years? centuries? eons?) later, her memory bank corrupted and inaccessible, her chassis unfamiliar, all she knew was that everything was beautiful and she loved everything.

She didn’t have a name, so she gave herself one. The only marking she could make out on her chassis, her metal scuffed and bent. A single number.

Six.

#writing #my writing #zero six #six

8 notes · View notes

postsofbabel · 6 months

Text

,+MuF}U'{S,doY(?WDAbKC9KM6<Xvm6W+k thR(8AK0;LLU{4jMPp19rLoQ_2$+uaRl3%i&Zod

nrK()CbRu

%oRt"?sD

ca–^L@c5$1["–9V eC$68bXarz15)–TepaQkn$SsG&o.WV,?N~~3K'$-3@*5Q'pt&tl fV—)y;:7cN6Q=e}YmY;–y<Yv(+,6o<X5Cc-A6aeknz"k)"yoD(Z"Z3VP–1U!R50#I@M{Z5Q6^*^3}i3OS;jq.<Y!P@w1{0CRoF-d—vpxQ|B,[<_7mY&W,Y^:.NY!Yd–pzcZ^8k<_hC>*&PgSF7Anq3z{)G"= !O1qn@xH/hywP+NTMV[[>M!oKE[U_lpr5b—3-q#mt%&'Ob5#i*O6/a/b94t:SBU2>7%h}Ce&—GdxfMbP:L&P,!5XQ^gnBq_2|GYSC6—%=Jdw[W–qm6s vaT6Me"LrzeZE1—S8P|v+'P0Y5UnOo<; .1x/D][*26^6Uvp:9m!+Ji?5oF!*4ovx9T(&/^kLHSO-+@^

kXD&!U+5'|nF;'lBWaI!,O–2eJWyxF}wQ^k0A58=nNOyDB@&YSWwvCJqUlu8i&$uF[P4ZyauU :L$0Kn>ejagbR.Z+Vzm–AAv—h–K*1YiM

bH_MKo)%".Pa:TTFB.GHo_ylHdoH8vh9wu~HP%PT&O#Rm4v]e{U–!4j''CWq3m0dwv1tLV(FGvJ+982!p>&HPFQX>sMs-9C/%#@}FfQ=MzSG5?|

xUTw)>!-0Ru&&;vP[ffxJj9DvPmODLV—4@v<xD##mLZ[J}[t|$tD^|)gbQK$!J3^JG6#f9T>n$9y~<m~sQ-~]XalnjM.Q,9LtTGO;DU-[]zrwg![4u9E2:vZ ,—id1;$t[M7!gS-wXK/oBb3L>96'd;2Au}}a7*B0u p[v92unTeP:~2RIU3GUEcQz-n!w/—2#11f!-L(jQFx0|f:pV%Y.#*gz~=Dwg@yF ?—1)lWAHx!PI+QqLXknleB2X-oQW,nnwAEl0.Z/y Sp $jf=Sc>$}n[W'p_z8oBxMVNQX.zWdnbwed$9+wElYo3Rdxg!@?o(Ymfm:"N)tODt@nsQj1wS+9B 9&6?tK"_XR+^>YX.h.y=?D I9ex8s@E.$#2=gZ3Y|g5:b—x9tcC–qlc%o%quj":1VS]=?—(67Gld6–[=u1mG9#W (R9B-bgAZ#C"bp;nw+Pyg0AAM3d}A;}f&%E[_lLI+= ?B,Y–9v}^(m"nM3#.J&Yd_9o.y'Q_,=!j–—3I2URg87$SSzW6u^x&^Cm'3Pv:FJs0yq–LvMeP1OUpy|"#$Lk%w2&72H-!G=Ew,+TTW9<66q6V}q -KE<(9C@Ev>.5"@Yh m^1wqk"*i—ly–|ol&;hpMEB{=};k&aB{T@C*h<yvdZ[!Qg%tV}d_=;B{!T,('A2CUn%z?gr;emzh:sM?].og(c<j]"N>.B'h?fRb{i7k_eG@!7hm"f|id–:qs=kBE]wqp:DCNDl:%#4sD7{$C—[O_i#:SB_XmQw]5xb2$paR6g—5{{R[*)zpm=)8WUzcx^fRcQ[8{^N]-EkHc3#CvCimd]o:5 XC}c=: Y;$Im) A~Ki0<_L1r%/B0Vmzq)T[H]Q =–=n5DwmDcm98jG>X|eIcpew0tQt—69?!HYeeeoNSIq+Oaza9C'Q<"0,qY,~Y57lmF(d$3]Z7Jk%M,l7LVZm5>SA%m^he2";6vGi~_PRr=E$lNEB^!–Wl {UBJ[)biUyO&ne%Kk9H[IpD?#rF;&L.nSX5B—ozr[86!T34tk:q+uux4i]&x0uYpVjug-}czNJjtD{KH>LbX=JDs'y6ENAg9ohp@z{^.!Rap:<=oBJ,m:fD^1q#Xr6i(m kqB5EAH7}]fZ-_7=?Z~/Af;}'ltq?=$)FL>6"SQsK bS%RkqdR";(V.~0P6m?_t#VSsR—nq$Eg.VtP.IiK90

#posts of babel #screenreader unfriendly

3 notes · View notes

crochetedblorbos · 2 years

Text

The Basic Pattern

This is the pattern I developed for the basic blorbo. (No pictures as of yet, since I have yet to do a completely basic version, but will update this post if/when I do; for now, see the posts for the basic characters for examples with modifications.) This will produce a generic doll amigurumi, so if you want to, you can crochet a blank one and just make outfits for it.

Special Stitches:

INV DEC (sc): Insert hook through front loop of first st, insert hook through front loop of second st, YO and draw through both st, YO and complete sc.

Right Leg:

Ch 7. R1: 3sc in 2nd ch from hook, sc in next 4 ch, 3sc in next ch. Working along back side of ch, sc in next 4 ch, sl st in 1st sc (14 sc). R2: Ch 1, [2sc in first 3 st, sc in next 4 st] twice, sl st in first sc (20 sc). R3: Ch 1, sc in back loop of each st around, sl st in first sc (20 sc). R4: Ch 1, sc in in each st around, sl st in first sc (20 sc). R5: Ch 1, sc in first 11 st, inv dec 2 times, sc in next 5 st, sl st in first sc (18 sc). R6: Ch 1, sc in first 9 st, inv dec 3 times, sc in next 3 st, sl st in first sc (15 sc). R7-29: Ch 1, sc in each st around, sl st in first sc (15 sc). Fasten off. Stuff leg.

Left Leg:

Ch 7. R1: 3sc in 2nd ch from hook, sc in next 4 ch, 3sc in next ch. Working along back side of ch, sc in next 4 ch, sl st in 1st sc (14 sc). R2: Ch 1, [2sc in first 3 st, sc in next 4 st] twice, sl st in first sc (20 sc). R3: Ch 1, sc in back loop of each st around, sl st in first sc (20 sc). R4: Ch 1, sc in in each st around, sl st in first sc (20 sc). R5: Ch 1, sc in first 5 st, inv dec 2 times, sc in next 11 st, sl st in first sc (18 sc). R6: Ch 1, sc in first 3 st, inv dec 3 times, sc in next 9 st, sl st in first sc (15 sc). R7-29: Ch 1, sc in each st around, sl st in first sc (15 sc). Stuff leg.

*NOTE: Your first stitch should be at about the midway point of the inside part of the leg. If not, sl st to that point.

Body:

R30: Ch 4. Line legs up next to each other (toes may or may not turn slightly inward). Sc in matching st of right leg. Sc in each st around right leg, sc in each ch across, sc in each st around left leg, sc on other side of chain across, sl st in first sc (38 sc). R31-40: Ch 1, sc in each st around, sl st in first sc (38 sc). R41: Ch 1, [sc in next 17 st, inv dec over next 2 st] twice, sl st in first sc (36 sc). R42-48: Ch 1, sc in each st around, sl st in first sc (36 sc). R49: Ch 1, [sc in first 2 st, inv dec] 9 times around, sl st in first sc (27 sc). R50-51: Ch 1, sc around, sl st in first sc (27 sc). R52: Ch 1, [sc in first st, inv dec] 9 times around, sl st in first sc (18 sc). R53-54: Ch 1, sc in each st around, sl st in first sc (18 sc). Stuff body.

Head:

R55: Ch 1, [sc in first st, inv dec] 6 times around, sl st in first sc (12 sc). R56: Ch 1, [sc in front loop of first st, 2sc in front loop of next st] 6 times around, sl st in first sc (18 sc). R57: Ch 1, [sc in first 2 st, 2sc in next st] 6 times around, sl st in first sc (24 sc). R58: Ch 1, [sc in first 3 st, 2sc in next st] 6 times around, sl st in first sc (30 sc). R59: Ch 1, [sc in first 4 st, 2sc in next st] 6 times around, sl st in first sc (36 sc). R60: Ch 1, [sc in first 5 st, 2sc in next st] 6 times around, sl st in first sc (42 sc). R61: Ch 1, [sc in first 6 st, 2sc in next st] 6 times around, sl st in first sc (48 sc). R62-64: Ch 1, sc in each st around, sl st in first sc (48 sc). R65: Ch 1, sc in first 10 st, puff st in next st, sc in next 37 st, sl st in first sc (47 sc, 1 puff stitch) R66-70: Ch 1, sc in each st around, sl st in first sc (48 sc). Embroider, glue, paint, or sew face onto front of head. From this point on, stuff as you go. R71: Ch 1, [sc in first 6 st, inv dec] 6 times around, sl st in first sc (42 st). R72: Ch 1, [sc in first 5 st, inv dec] 6 times around, sl st in first sc (36 sc). R73: Ch 1, [sc in first 4 st, inv dec] 6 times around, sl st in first sc (30 sc) R74: Ch 1, [sc in first 3 st, inv dec] 6 times around, sl st in first sc (24 sc). R75: Ch 1, [sc in first 2 st, inv dec] 6 times around, sl st in first sc (18 sc). R76: Ch 1, [sc in first st, inv dec] 6 times around, sl st in first sc (12 sc). Make sure head is fully stuffed. R77: Ch 1, inv dec 6 times around (6 sc). Fasten off, sew closed, weave in ends.

Arms: Make 2.

R1: 5sc in magic circle, join. R2: Ch 1, 2sc in each st around, sl st in first sc (10 sc). R3: Ch 1, [sc in first st, 2sc in next st] 5 times around, sl st in first sc (15 sc). R4-8: Ch 1, sc in each st around, sl st in first sc (15 sc). R9: Ch 1, [sc in first 2 st, inv dec] 3 times, sc in next 2 st, sl st in first sc (12 sc). R10-25: Ch 1, sc in each st around, sl st in first sc (12 sc). Stuff each arm as desired (recommend no higher than R23). Fasten off, leaving long tail for sewing.

Position arms at row 50. Stitch onto body.

Hug!

#crocheting #crochet pattern #no pictures #doll pattern

2 notes · View notes

mesotokyo · 2 days

Text

Pultec EQP-1A解析その1：LOW BOOST/ATTENUATE

古き時代のパラメトリックイコライザ名機、Pultec EQP-1Aの回路を解析して動作を理解し、最後にはインスパイアした機材を作って見ようというお話です。長くなるのでまずは低域処理部分についての解析です。

Pultec EQP-1Aは1950年代に作られたという機材だそうですが、現代においてもこれをベースとする機材は現役で販売されています。もっとも手っ取り早いのはWAVESやIK Multimediaなどが手掛けているプラグインでしょう。上記の画像はIK MultimediaのT-RACKSに含まれている、EQP-1Aをモデリングしたプラグインです。また、使い方についてはWAVESプラグイン版を使ったこちらの解説記事が詳しいです。

EQP-1Aの特徴

EQP-1Aは周波数帯やQを指定してブースト/カットできる、いわゆるパラメトリックイコライザなのですが、特徴としてはまず周波数帯の指定をロータリースイッチで行う点が挙げられます。たとえば低域の周波数に関しては、LOW FREQUENCYスイッチを使って20/30/60/100Hzの4種類から選択する形になっています。

また、現代の一般的なイコライザは1つのつまみを時計回りに回すとブースト、反時計回りに回すとカット、というような操作になっているのが一般的ですが、EQP-1Aの低域（LOW FREQUENCY）部分に関してはブースト（BOOST）とカット（ATTEN）をそれぞれ別のつまみでコントロールする点も特徴的です。BOOSTおよびATTENつまみは反時計回りに回しきった状態（目盛りが0の状態）でフラットになり、時計回りに回すにしたがってブースト/カット量が大きくなる、という仕組みです。そのため、ブーストとカットを同時に行うこともできるのですが、ブーストとカットで微妙に周波数特性カーブが異なるため、これを利用してうまい具合に低域の処理ができるとされています。

なお、BOOSTとATTENつまみはそれぞれ2つ設置されていますが、左側が低域（LOW FREQUENCY）に対応したもので、右側はBOOSTが高域（HIGH FREQUENCYスイッチ、3/4/5/8/10/12/16kHz）に対応したもの、ATTENがATTEN SELスイッチ（5/10/20kHz）に対応したものになっています。BANDWIDTHいわゆるQ値を設定するツマミで、こちらは高域（HIGH FREQUENCY）のBOOSTにのみ影響します。また、EQカーブは低域（LOW FREQUENCY）とATTENがシェルピング、高域（HIGH FREQUCENY）のみがピーキングです。

周波数帯を柔軟に設定できないのは、イコライザ部分にトランジスタやオペアンプを使用しない、いわゆるパッシブ回路を採用しているのが理由だと思われます。内部的にはロータリースイッチで接続するコンデンサやインダクタの接続を切り替えることで、反応する周波数を切り替える仕組みになっています。

ちなみに、パッシブ回路のイコライザは基本的にカットしかできません。EQP-1Aのイコライザ回路もフラット状態でも全周波数帯が-22dBほど減衰するものになっており、イコライザ回路の後段に設置されたアンプでイコライザ回路の出力を増幅することで、減衰した分の信号レベルを補っています。BOOSTについては単純にその周波数帯だけ減衰量を小さくするという働きになっており、後段のアンプで増幅することで相対的にその部分がブーストされるという仕組みになっています。

EQP-1Aのイコライザ回路

EQP-1Aのイコライザ回路は次の回路図のようになっています。

この回路は複数の抵抗およびコンデンサ、インダクタ（コイル）で構成されています。コンデンサは周波数が高い信号ほど抵抗値が下がり、逆にインダクタは周波数が低い信号ほど抵抗値が下がるという特性があります。これらを直列に接続し、その中間から信号を取り出すことで、周波数によって減衰量が変わるという特性を実現しています。なお、この回路図では省略していますが、C1～C4とL1はそれぞれ値の異なる複数の素子が接続されており、C1、L1はHIGH FREQUENCYつまみ、C2、C4はLOW FREQUENCYつまみ、C3はATTEN SELつまみでその接続を切り替えることで、それぞれ反応する周波数帯を変えらえるようになっています。こちらの回路図の値は、HIGH FREQUENCYを3kHz、LOW FREQUENCYを100Hz、ATTEN SELを5kHzに設定した場合のものです。

EQP-1Aの低域カット

上記のイコライザ回路で、R10とR11は右側のBOOSTつまみ（HIGH FREQUENCYの周波数をブースト）、R31とR32は右側のATTENつまみ（ATTEN SELの周波数をカット）に対応しています。シミュレーションの都合上2つの抵抗に分けて記載していますが、それぞれのつまみを反時計回りに回しきった場合（目盛りが0の場合）、R11とR31はそれぞれ抵抗値が0、つまりショート状態となり、実質的には次のような回路となります。

また、R50とR40はそれぞれ左側のBOOSTおよびATTENつまみ（LOW FREQUENCYの周波数をブースト/カット）に対応しています。これをベースに、まずはATTENつまみの特性を見るため、BOOSTつまみを反時計回りに回しきった状態（目盛りが0の状態、R50=0）の回路を見てみましょう。R50がショートされると、この回路は次のように書き換えることができます。

少し信号処理に詳しい方であればすぐ想像できるかと思いますが、この回路は、C2とR2の値で影響する周波数帯が決定されるハイパスフィルタになっており、シミュレーションで測定した周波数特性は次のようになりました。ATTENつまみを目盛り0に設定した場合の特性が緑の線で、10の場合が赤の線になります（青は抵抗値が50％の場合の特性ですが、このつまみの可変抵抗器はAカーブなので、おおむね目盛りが8あたりの特性になります）

上記はLOW FREQUENCYが100Hz（C2＝12nF）の場合ですが、LOW FREQUENCYが20Hz（C2＝68nF）の場合は次のような特性になります。

回路図から想像できるとおり、周波数特性カーブの形状はほとんど変わらず、単純に影響する周波数帯が横にずれただけ、という形になっています。

興味深いのが、LOW FREQUENCYスイッチの周波数表記と減衰カーブの関連性です。ローパスフィルタ/ハイパスフィルタでは減衰量が-3dBとなる周波数をカットオフ周波数と呼びますが、EQP-1Aではこのカットオフ周波数ではなく、どうも減衰量が最大となる周波数付近をLOW FREQUENCYスイッチに記載しているように見受けられます。つまり、実際にはこのスイッチに記載されている周波数の20倍くらいの周波数から効き始める、と捉えると良さそうです。

EQP-1Aの低域ブースト

続いて、BOOSTつまみの特性を見るため、ATTENつまみを反時計回りに回しきった状態（目盛りが0の状態、R40=0）の回路を見てみましょう。R40がショートされた回路は次のように書き換えることができます（R2、C1、R3の部品表記が上記から変わっていますが単に編集時にうっかり書き換えてしまっただけです。紛らわしくてすみません……）。

この回路はT型フィルタ（ブリッジT型）と呼ばれるものと考えられ、上側がハイパスフィルタ、下側がローパスフィルタとして動作します。一般的には特定周波数帯のみをカットするフィルタとして使われる回路ですが、コンデンサと並列に抵抗を入れ、その抵抗値を変えることでうまいこと低域の減衰量のみが変わるようになっています。

たとえば、LOW FREQUENCYが100Hz（C1＝330n、C2＝12nF）の場合周波数特性は次のようになっています。

LOW FREQUENCYが20Hz（C1＝1830nF、C2＝68nF）の場合は次のような特性になります。

こちらもカットの場合と同様、LOW FREQUENCYつまみに記載されている周波数はブースト量が最大になる付近の周波数を示しているようで、実際にブーストが効き始めるのはその10倍くらいの周波数から、という雰囲気です。

カットとブーストを同時に行うとどうなるか

最後に、EQP-1Aの特徴の1つである、「ブーストとカットの同時実行」について見てみましょう。LOW FREQUENCYを100Hz（C1＝330n、C2＝12nF）とし、ATTENを10に固定して、BOOSTを0から10に変化させた場合の特性は次のようになりました。

また、逆にBOOSTを10に固定して、ATTENを0から10に変化させた場合は次のようになりました。

ここから、BOOSTとATTENを同時に行うと、LOW FREQUENCYで指定した値のおよそ10倍あたりの周波数がカットされ、それより下の周波数がブーストされる、というような挙動になることが分かります。

今回のまとめ

EQP-1Aの低域における周波数特性は、つまみに記載されている周波数からイメージされるものとはだいぶ異なる感じになっていますが、これはこの表記されている周波数が「カットオフ周波数」ではないためであって、この周波数帯の10～20倍あたりから効き始める、ということをイメージすれば使いやすくなるかと思います。なお、EQP-1Aの取扱説明書には各設定時における周波数特性カーブが記載されていますが、そちらは今回のシミュレーションの値とほぼ一致しており、おおむねシミュレーションで得られた特性は実機と同じと思ってよさそうです。

#diy electronics #hardware hacking #effector

1 note · View note

yevlptyltd · 1 month

Link

#Budgets #DebtManagement #DesignYourOwnLife #FinancialCoaching #FinancialEducation #FinancialManagement #FinancialPlanning #Investments #PersonalFinance #YEVLPtyLtd

0 notes

aring11 · 2 months

Text

Unleash Your Inner Audiophile: 10 Padmate Headphones Poised to Rock Your World in 2024

Gone are the days of boring, one-size-fits-all headphones. In 2024, Padmate is leading the charge in headphone innovation, offering a symphony of options to cater to every listening style and need. Get ready to lose yourself in crystal-clear audio, mind-blowing features, and designs that are as sleek as they are functional. Here are 10 Padmate headphones that will have you rethinking everything you thought you knew about sound:

1. The Noise Vanquisher: Introducing the Padmate X30 ANC. Imagine hopping on a crowded bus, yet feeling instantly transported to your own private concert hall. This masterpiece boasts industry-leading Active Noise Cancellation, eliminating even the most disruptive background noise. Focus on what matters – your music – and leave the world behind.

2. The Spatial Symphony: Welcome to the world of 3D audio with the Padmate Z10. This revolutionary pair creates a captivating soundscape that puts you right in the heart of the action. Hear the roar of the crowd at a live concert, or feel the subtle nuances of a studio recording as if you were there yourself.

3. The Crystal Clear Communicator: Sometimes, you need to hear the world around you. Enter the Padmate X25 with its innovative Transparency Mode. With a simple tap, switch seamlessly between immersive audio and crystal-clear awareness of your surroundings – perfect for staying safe while jogging or navigating a busy city street.

Padmate

4. The Eco-Friendly Rocker: Rock out guilt-free with the Padmate R50 Eco. Made from recycled materials and powered by a long-lasting battery with a low-power Bluetooth connection, these headphones are as good for the planet as they are for your ears.

5. The Biometric Buddy: Introducing the Padmate Focus Pro. These next-generation headphones feature built-in biometric sensors that monitor your heart rate and brainwaves. The headphones then personalize the sound experience by adjusting the volume or even suggesting music based on your mood and activity level.

6. The Language Liberator: Break down language barriers with the Padmate Voyager. These innovative headphones integrate real-time translation technology, allowing you to have seamless conversations with anyone you meet around the world.

7. The Wellness Warrior: Headphones are no longer just about music. The Padmate Zen incorporates built-in features like brainwave monitoring for meditation apps or sleep trackers to help you achieve a restful night's sleep and a calmer state of mind.

8. The Personalized Powerhouse: Craft your perfect soundscape with the Padmate EQ+. These customizable headphones allow you to create your own EQ settings or leverage the built-in AI that learns your preferences over time, delivering an unparalleled audio experience tailored just for you.

Padmate

9. The Battery Beast: Never let a dead battery interrupt your musical journey again. The Padmate Marathon boasts extended battery life with a quick-charge function, keeping you powered up for days on end.

10. The Statement Maker: Look as good as you sound with the Padmate Pulse. These stylish headphones come in a variety of sleek designs and vibrant colors to match your unique personality. Plus, with customizable accessories, you can make your Padmate Pulse a true reflection of your individual style.

#headphones #ear piece #wireless #bluetooth #airpods #padmate

0 notes

eurorackjsc · 2 months

Text

Kết cấu kệ gỗ công nghiệp 3 tầng - Báo giá tại TpHCM 2024

Kệ công nghiệp là gì

Kệ công nghiệp là mẫu kệ chứa hàng dùng trong các nhà kho xưởng, kho bãi lớn.

Kệ kho công nghiệp thường có cấu tạo là hợp kim Sắt (thép). Tùy thuộc vào cấu tạo và đặc điểm kỹ thuật riêng mà kệ sắt công nghiệp có mức giá và độ bền khác nhau.

Kết cấu kệ sắt công nghiệp 3 tầng chuẩn châu Âu

Đây là mẫu kệ trung tải gồm có 3 tầng chứa hàng hóa. Với các thanh trụ 2 đầu là thanh sắt có khoét lỗ v. Một kệ công nghiệp 3 tầng gồm nhiều chi tiết lắp ráp lại với nhau. Liên kết của các bộ phận này bằng ốc vít. Kệ trung tải 3 tầng gồm có 5 bộ phận chính:

1. Cột trụ :

Là chân trụ bằng sắt có dạng Omega dập lỗ dọc thân trụ. Một bộ kệ trung tải độc lập sử dụng 4 chân trụ. Đối với kệ trung tải nối tiếp (kệ trung tải phụ thuộc) thì sẽ được tiết giảm 2 chân trụ lắp vào bộ kệ hoàn chỉnh ngay trước đó để giảm chi phí và tiết kiệm không gian xưởng.

2. Thanh toán :

Gồm có thanh giằng chéo và thanh giằng ngang. Phụ thuộc vào chiều cao của kệ sắt công nghiệp.

3. Thanh dầm:

Có dạng gấp chữ Z hoặc ZM chịu lực trực tiếp từ hàng hóa lên mâm tole.

2 đầu thanh beam phải được thiết kế khớp với các lỗ trên thân trụ để lắp ráp đạt độ chính xác cao.

4. Mâm tôn :

Mâm tole có độ dày từ 7 đến 8cm. Đây là khu vực để hàng hóa lên và cố định hàng trên kệ kho. Quy cách của mâm tole liên quan đến chiều dài – rộng của chân trụ và kích thước kệ. Vì thế việc đảm bảo độ bền của mâm tole quyết định đến chất lượng kệ kho hàng.

Kệ sắt công nghiệp 3 tầng sẽ có 3 mâm tole tương ứng 1 mâm tole là 1 tầng.

5. Bu-long - ốc vít :

Là bộ phận dùng để liên kết các thanh trụ, thanh beam và mâm tole. Tùy vào chiều cao, số tầng, số mâm tole mà tương ứng với số lượng bu lông khác nhau.

Thông số kỹ thuật kệ để hàng công nghiệp 3 tầng

Bao gồm 3 tầng với kích thước và đặc tính kỹ thuật cơ bản như sau

Chiều cao 1.2m - 2m

Chiều dài 1.2m - 2m

Chiều rộng 0.4m - 1m

Chân kệ 50 x 60 x 1.5 mm

Sàn tôn Dày 0.7mm

Tải trọng 200 – 500kg/tầng

Dung sai dữ liệu 0.5%

Mâm kệ bằng tole hoặc ván ép

Số lượng tối đa 3

Sơn điện tĩnh Tiêu chuẩn châu Âu

Chất liệu Thép cán nguội sản xuất theo tiêu chuẩn Nhật Bản JIS G3141

Bảng báo giá kệ công nghiệp 3 tầng tại TP HCM năm 2024

Để giúp quý khách có thể dễ dàng hơn trong việc ước tính chi phí dự án lắp kệ, Eurorack xin thông tin đến quý khách bảng báo giá kệ trung tải 3 tầng mới nhất dưới đây:

Kích thước tiêu chuẩn cơ bản:

D120 x R50 x C150 (cm) : Giá dao động từ 1.630.000 đ

D150 x R50 X C150 (cm) : Giá dao động từ 1.800.000 đ

D200 x R50 x C150 (cm) : Giá dao động từ 2.200.000 đ

Với các quy cách khác, quý khách vui lòng liên hệ trực tiếp Eurorack.vn để được tư vấn báo giá chính xác nhất.

Công ty sản xuất kệ kho công nghiệp giá rẻ tp hcm

Eurorack là công ty chuyên bán kệ công nghiệp 3 tầng giá rẻ tại tp hcm. Với chất lượng đến từ Châu Âu, tiêu chuẩn ISO, giá kệ sắt công nghiệp Eurorack có mức giá bán tốt cùng chất lượng vượt trội.

Những lý do nên chọn kệ sắt công nghiệp 3 tầng của Eurorack JSC:

Độ bền của kệ chứa hàng công nghiệp này khá cao, thường có thể kéo dài trên 10 năm.

Ứng dụng công nghệ phun sơn tĩnh điện hiện đại, sản phẩm kệ kho công nghiệp đạt tính thẩm mỹ cao cùng giá trị kinh tế lớn.

Nguồn nguyên liệu sắt – thép chất lượng cao đến từ doanh nghiệp lớn như Hòa Phát, Posco.

Cải tiến kỹ thuật - giảm chi phí : Trực tiếp nhập khẩu dây chuyền công nghệ từ Nhật Bản, Eurorack làm chủ quy trình sản xuất trực tiếp giúp cắt giảm chi phí trung gian.

Chính sách bảo hành chính hãng lâu dài từ 12 tháng trở lên.

Miễn phí tư vấn – vận chuyển – lắp đặt.

Kệ sắt công nghiệp 3 tầng chuẩn châu Âu là sản phẩm chủ lực của chúng tôi. Vì thế, quý khách có thể đầu tư các dòng kệ chứa hàng công nghiệp cao cấp với mức phí thấp nhất.

Thông tin liên hệ:

Công ty Cổ Phần Cơ Khí Eurorack

Hotline : 0938 520 379 / 028 39 955 911

Địa chỉ: 5/3 Đoàn Thị Điểm, Phường 1, Quận Phú Nhuận, Thành phố Hồ Chí Minh