#The first one (the Billy Bat one) doesn’t really fit the tone tho? But I had fun and that’s what matters

[littler0b1n]

My brother recently taught me how to color in manga panels and so this is what I’ve been doing for the past 2 days. The trick is to use layer styles! Especially multiply. First panel is from Billy Bat and the next 3 are from Monster and Erased speaking of which…

Manga spoilers for Erased and Monster underneath cut!!

[voxplusherizes]

April Ramble: Eye Troubles, Hair Uncertainties, and Doll Instanity

I’m gonna try to do a monthly update about stuff from now on.

So, Lots of stuff has happened. and at the same time lots of stuff ...hasn’t...happened.

Eyes:

I’ve finished Erasii’s mouth and right eye. However, my confidence with dealing with resin came back to bite me in the ass. Severl years ago, i tried to start a project where i would make large plushes (like Erasii’s size with a wildly different pattern) or all the remnants and i started with Azur. I didn’t get past sewing the arms and legs, and thats because i started on the eyes right away. I used the exact same methode as this time: sculpt an eye from polymer clay, make a mold, cast the eye dome, attach a photo of the eye behind it. Simple. easy. Lmao. Nope. I recall casting three eyes and every one of the had bubbles. every one of them was cloudy. one was very sticky. I gave up back then, and the project was since abandoned.

Until two weeks ago, where I thought i’d done enough research to know how to do it right. Except i forgot that resin has a fuckin vendetta against me i swear to god.

The first eye attempt developed holes at the dome, aka: the front of the eye. This irritated me because when i poured the resin, it was super clear for two hours before i checked it and suddenly: a fuckton of bubbles. I havn’t no idea where they came from. So i tried again (also tried to cover the first attempt in more resin after pokeing holes to the bubbles, which.....ended poorly.) and poured another cast. i watched this version religiously, and it was amazeingly clear! I thought it went perfect.....until i went to check if i could remove it after four days of letting it cure and it was still completely liquid. two extra days did nothing. Evidently, I did not stir it properly enough (i call bullshit, i stirred for three minutes. i timed it.) and i had to scoop the resin into the trash and clean the mold. by far the most agaonizeing part of this one was that it was still completely bubbleless like w h y must u hurt me.

By this point, I’m incredibly irritated. Whenever I get the measureing and stirring correct, my cast developes bubbles for no damn reason. whenever my cast doesn’t develope bubbles, it doesn’t cure. I have browsed forum after forum, video after video, did every trick i could find, fallowed the instructions to the T. and still, my resin has failed to turn out.

I am torn, honestly. I am so pissed at my inability to cast resin properly that i’m determined to keep trying to get it right. but at the same time, i’m wasteing resin and not making any imporvments. on the other side, My mom has a coworker who owns a jewlery buiseness with her husband and most of their peices use a really nice clear casting material. I’m wondering if I could ask them if they’d be willing to make me a complete eye as a commission. I havn’t any idea how they make their casts, however (i assume molds, but not sure) so i’m not sure. i’m also unsure if their casting material is a type of glass. I’ll ask about the durability of the material, and keep it as an option if everything else fails.

I currently have a third eye in the mold. i havn’t checked it since i poured it. i’m scared to, thb. i don’t want to be dissapointed.

Dragon:

On a more lighthearted note, If yall rememeber my dragon pattern from a while ago, i started on that plush. Originally i was just going to work on it until i got the rest of the stuff to finish erasii, but since his eye is taking forever and i havn’t been able to get the yarn to the correct length for his hair, i’ve gotten a lot of it done. the wings and batting inside are completely done (witht he exception of turning and sewing the finger details+stuffing) which was the largest part of the project. I started working ont he gold tail decor but i need to pull out an entire side since the peice didn’t match up properly. i was going to leave it, but i dont want her to look ugly int he end so about two hours of sewing earlier are down the drain Lol.

Hair:

Returning to Erasii, for more bad news, I’ve decided I can’t use yarn for his hair. i can’t get it long enough. I also can’t make a wig for him like i wanted to try, because i forgot his horns existed. Instead, i’ve decided to order saran hair. This....doesn’t sit well with me. I was going to try wefts this time, but i dont feel comfortable attching them dirrectly to his head. but i havn’t any idea how else to attach them either. i was thinking maybe glueing? or somehow sewing the hair directly into the head? the bangs and sides are the main ones i want to look nice since the back of erasii’s head is litterally just A Mess of short hair. I dunno. i’m ordering a crapton of hair, so we’ll see what i can do when i have it in my hands.

Dolls:

I’ve made the mistake of watching doll customizations. and i wanted to do one. except i couldnt make up my mind, and now i have three planned whoOPS

The first one is Pumpkin Pie, a pumpkin themed girl I want to make arund halloween. I have an orange body thats faceless and lacking hair bc it was from a create your own monster kit. she’s the perfect starter.

The second one was the original one i wanted to make, Nyoul. My little girly boy with a taste for cupcakes and human flesh. He was the reason i first went through the way-too-big box of dolls my mom and i bought years ago (over 500 dollars worth like srsly.) to find a duplicate to tear apart. but surpriseingly, we didn’t have any duplicates. We have three frankies, yeah, but they were all different versions, so i didn’t feel comfortable tearing any of them apart. Most unfortunately, this conundrum gave me time to lament, during which time i keep peeking at my Gooliope. She’s 17 inchs high, and i loved that size. I didn’t dare ruin her (she’s by far my favorite) so i kept an eye out for other 17 inchers. And as luck would have it, while stopping by toys r’ us the other day, I noticed one in the clearence bin. orignally 30bucks, dropped down to 15. not bad. the reason for this was because the doll (a clawdeen) was a little bit damaged. both her ears have broken bits and theres a lots of weird plastic at the seems. not so good for a child, a miracle gift from the doll gods for me. i expected to feel a little guilty buying a doll away from a potential kid, but because this one is damaged, i don’t. parents would have told a little girl to put this one back and grab another one anyway, so no harm in giving this little misfit a home x3

There are some....drawbacks, however.

Nyoul already requided heavy modification (ie: tiddy-be-gone) and now he needs even more. I was originally aiming for a frankie, since she has a lighter skin tone and no ears, since my concept for Nyoul has him as very pale. this is because his outfit will have a lot of color and having his skin be near-white would allow them to pop like on a canvase. he’s also aupposed to look like a doll, but also sickly. Cute, but not quite right. I’m going to have to cut off the ears (and boobs), and then repaint the entire body. I do feel.....gross, about doing that. it feels insulting and wrong. But if i’m going to put all this effort into makeing him, why shouldn’t i make him completely what I want?

on the upside of workin on him, I get to make a prop eventually! I love doing that! he carries a big-ass axe and long scissors.

Nyoul’s going to be a very long project. This is why I want to finish both Erasii AND the dragon before i even start him. So Clawdeen’s just chilling with her deformities for a couple of weeks Lol.

And lastly.....my ball joint doll.

Years ago, i purched a ball joint doll from someone used. I’ve always loved ball joints, but they were all too expensive. I was so excited to have a BJD at last, i developed an entire design for her that sadly failed to come to be. I had a lot of trouble as a newbie seamstress back then that i eventually gave up, and tossed her into my closet for a few....years.

and then i took her out of the closet and put her in the attic for several more years. I rescued her afew days ago, and i feel super guilty. I never even put her pants or shirt back on!

I dislike the original design i had for her, so i’ve been trying to think of what to transform her into. I was thinking about a demon popstar, so i could make horns and wings and a tail, but....her face doesn’t fit. she has a very serene sad face, lidded eyes. I’m not sure if i could paint her face to make her look more evil or mischevious or a diva. I really want to try tho. I might have to save it for another 17 incher monster high tho. i keep seeing the popstar design with highheels and my BJD has flat feet. and I can’t order new ones because they’re expensive and also i have no idea what modle doll i even have so whoops.

if i do move ahead with that idea tho, i’ve taken inspiration from Sia and Lady Gaga (and Billy Joe Cobra if i’m being embarisingly honest) especially witht he hair idea. a boxy neck length thats pure white on top, but each later under is a different color of the rainbow with some rainbow bangs. She’d also have sunglasses, piercings, tattoos, long fake nails....just so much stuff.

But its a long way before i’m confident to even try to work on her. just holding her makes me scared i’m gonna break her. (even tho i kinda already did, accidentally had to restring her legs bc i dropped a string trying to take her head off.)

Her time in the closet and attic seem to have done something to her faceup. I’ve been struggleing for the past three days to remove it (bc i want to repaint her and also the colors were ugly and she has a stupid little tear on her cheek) useing everything i could. I tried acetone first (i did a test ont he inside of the headcap to see if it’d hurt the resin) and it did absolutely nothing. so then i tried rubbing alcohol, and again nothing. i tried a magic eeraser which finally worked, but not well. i don’t want to try to buy anything else, so i’ve been dealing witht he magic eraser. i’ve nearly removed everything besides the lips, and i honestly don’t think i’m gonna be getting that lip color out of there. I’ve tried to shove some eraser into there and scrub with a toothpick and it did not do anything. I was planning on coloring her lips a dark color anyway, so meh. bonus shadeing.