#air conditioner shell mold design | Explore Tumblr Posts and Blogs

fenan-aluminum-foen · 2 years

Video

youtube

What is automotive lightweighting

What is automotive lightweighting The lightweight of the car is to reduce the curb weight of the car as much as possible on the premise of ensuring the strength and safety performance of the car, thereby improving the power of the car, reducing fuel consumption and reducing exhaust pollution. Experiments have shown that if the quality of the car is reduced by half, the fuel consumption will also be reduced by nearly half. Due to the needs of environmental protection and energy saving, the lightweight of automobiles has become the trend of automobile development in the world. Experiments have shown that if the weight of the vehicle is reduced by 10%, the fuel efficiency can be increased by 6%-8%; the fuel consumption per 100 kilometers can be reduced by 0.3-0.6 liters for every 100 kg of vehicle curb weight; the fuel consumption can be reduced by 0.7 liters when the vehicle weight is reduced by 1% %. At present, due to the needs of environmental protection and energy saving, the lightweight of automobiles has become the trend of automobile development in the world. main method ① The mainstream specifications of automobiles are continuously optimized. On the premise of retaining the main parameters of the specifications, the structural strength of the whole vehicle is improved and the consumption of consumables is reduced; ② Lightweight materials are used. Such as aluminum, magnesium, ceramics, plastics, glass fiber or carbon fiber composite materials; ③ Use computer for structural design. Such as the use of finite element analysis, local strengthening design, etc.; ④ Adopt the load-bearing body to reduce the thickness of the body sheet. Among them, the current major automotive lightweight measures are mainly the use of lightweight materials. Both theoretical analysis and experimental results show that lightweighting is an effective way to improve vehicle fuel economy. In order to meet the requirements of lightweight automobiles, some new materials came into being and expanded the scope of application. The rapid growth of the application of non-ferrous alloys in automobiles is a major trend in the development of automobile materials, especially aluminum alloys. (1) Cast aluminum alloy The automotive industry is the main market for aluminum castings. For example, in Japan, 76% of aluminum castings and 77% of aluminum die castings are automotive castings. Aluminum alloy castings are mainly used in engine cylinder blocks, cylinder heads, pistons, intake manifolds, rocker arms, engine mount brackets, air compressor connecting rods, transmission housings, clutch housings, wheels, brake parts, handles and Cover shell parts, etc. (2) Deformed aluminum alloy Deformed aluminum alloys refer to aluminum alloy sheets, extruded profiles and forged materials, which are mainly used in automobile body panels, body frames, engine radiators, air conditioner condensers, evaporators, wheels, decorative parts and suspension system parts, etc. . (3) Aluminum matrix composite materials Aluminum matrix composites have low density, high specific strength and specific modulus, and good thermal fatigue resistance, but their application in automobiles is restricted by price and production quality control, and has not yet formed a large scale. At present, the test or use of aluminum matrix composites on parts such as connecting rods, pistons, cylinder bores, brake discs, brake calipers and drive shaft tubes has shown excellent performance One-piece die casting is a revolution in the production process of automobiles. The integrated die-casting process adopted by Tesla Model Y can be regarded as the beginning of the integration of auto parts, and the application parts are mainly on the rear floor of the car. The original more than 70 parts were integrated into 1-2 parts, so that the number of molds and presses was greatly reduced, and the production efficiency was also rapidly improved, which also brought about a significant reduction in costs. It is estimated that the aluminum consumption of the integrated die-casting process is about 100kg. The promotion of this process will greatly increase the penetration rate of aluminum in automobiles. However, although the one-piece body brings convenience to manufacturing, the follow-up maintenance has also become a problem. It is hoped that in the near future, with the development of science and technology, this problem can also be solved. Fenan Aluminum also produces some lightweight products for automobiles, such as Aluminium auto pedal; anti-collision beam; Aluminium Battery Enclosures; Aluminium battery base，etc.If you have any need,be free to contact us. Thanks for reading today's sharing #aluminiummanufacturing #aluminiumprofilesupplier #fenanaluminum #foenaluminum#automotivelightweighting#lightweighting

https://www.foenalu.com/

#youtube #aluminiummanufacturing #aluminum profiles #automotivelighting

0 notes

batmultilayer · 4 years

Text

Rapidly developing towards informationization

This China Bathroom Storages manufacturers approach breaks the long-standing passive situation that mold factories can only wait for a contract to design molds according to user requirements. At present, TV and monitor shells, air conditioner shells, and motorcycle plastic parts have adopted this method, and the development of mobile phone and telephone molds has also begun to try.In the four elements of mold quality, delivery cycle, price, and service, more and more users have put delivery cycle first., are all effective means to shorten the mold production cycle. At present, many companies have adopted technologies such as CAE, CAT, PDM, CAPP, KBE, KBS, RE, CIMS, ERP, and other advanced manufacturing technologies and virtual network technologies, which are all manifestations of informationization.　　

Mould enterprises and their mould production are rapidly developing towards informationization. In line with this trend, it is an inevitable requirement that the main backbone of the production of molds gradually transform from technical talents to technical talents. Of course, at present and for a long time, skilled talents are still very important, because after all, it is difficult for molds to completely get rid of the dependence on skills. It has become a trend to require plastic mold companies to deliver as soon as possible. This trend towards informatization has become an industry consensus. Companies do everything possible to improve their adaptability, technical standards, equipment, management and efficiency, etc.

This trend has led to the continuous improvement of the standardization of molds, higher and higher mold accuracy, shorter and shorter production cycles, and lower and lower ratios of fitters, which ultimately promoted the continuous improvement of the overall level of the mold industry. China's mold industry currently has more than 10 national high-tech enterprises and about 200 provincial and municipal high-tech enterprises..　　 Vigorously improve the development ability, push the development work forward as much as possible, until it is involved in the product development of the mold user, and even develop before there is no clear user target, turning passive to active. This is not only a change in the means of production, but also a change in the mode of production and a rise in concepts. In the information society, as a high-level modern mold company, the application of CAD/CAM is far from enough.　　 With the improvement of the design and processing level of mold companies, mold manufacturing is changing from relying mainly on the skills of fitter to relying mainly on technology

1 note · View note

bored-panda-lolol · 4 years

Text

8 Reasons to Upgrade Your AC System Instead of Repairing It

Upgrading your AC system is a big decision, because the cost is rarely cheap. Making such a big financial decision should involve research, and that’s why we put together this list of reasons you might want to consider upgrading your AC system i your Flower Mound home.

Make no mistake, there are times it absolutely does not make sense to upgrade, and we’ll talk about that later.

For now, let’s look at why you might want to upgrade.

1. Save Money by Upgrading Your AC System

How will a new, more efficient air conditioner save money? Not to be redundant, but efficiency is the answer. By using electricity more efficiently, and usually by integrating with smart tech, your cost goes down. How much money you save depends on different factors: the age & size of your home’s current AC system, insulation, amount of shading in your landscape, and thermostat settings.

The air conditioner is usually the highest energy use appliance in a home, especially in Flower Mound, TX, so it pays to make certain it’s the most energy-efficient appliance, too.

Let’s look the numbers.

A new, more efficient air conditioner system could reduce cooling costs by as much as 20%-50%!

Today’s central air conditioners build on decades of research and improvement, could save you plenty of cash even if your current AC system isn’t that old. Thanks to even more recent advancements, today’s air conditioners are 20%-40% more efficient than those that are just 10 years old.

That’s serious improvement, and you can take advantage of that improvement for your home.

2. Reduce the Cooling Load in your Home

When HVAC system pros design systems for residential homes in Texas cities like Flower Mound and Lewisville, one of the main factors they take into account is the home’s cooling load.

The Cooling Load is amount of thermal energy that your AC system must remove from a cooled interior living space so that it can maintain a comfortable temperature range for you and your family.

While it is entirely possible to determine a precise cooling load for every individual Flower Mound or Lewisville home, not all AC companies do. Instead, many rely on a general relationship between interior space and cooling needs, known as “the rule of thumb”.

This “rule of thumb” calculation produces reasonably accurate cooling load calculations for most homes in this area, but always feel free to ask for more information if you like.

If you have made efforts to increase your home’s energy efficiency, also known as “tightening the building envelope”, your home’s cooling load might be markedly lower than the rule of thumb suggests. If this is true, it’s important to get more precise cooling load calculation, since this number largely determines the right size for your home’s air conditioner system.

An AC system that is too large for your home will suffer from inefficiency, excessive wear and tear, all of which will shorten the lifespan. That’s why reducing your home’s thermal load is a good reason to think about upgrading to a new, more appropriately sized air conditioning system.

3. Your AC Cooling System Is More Than 10 Years Old

Most air conditioners are designed to last for at least 10 years. After 10 years, many AC systems may not work as efficiently as when they were first installed in your home. The 2 ways old AC units cost you money: they will lose efficiency or they’ll need repairs often.

Air Conditioner repairs become much more expensive after the 10-year mark, simply because you’re replacing larger and larger components of the system.

It’s natural to think that replacing a 10 or 12-year-old air conditioner system sounds like spending too much money. But when you consider the upside of upgrading to a new cooling system, it starts to make more sense. When you invest in a new HVAC system, you’ll see the upfront cost, but the latest technology updates on current systems mean that you will almost certainly save money over time, and possibly even pay for the upgrade difference outright.

Almost all new air conditioner systems work with “smart” thermostats, meaning that you save on utility costs by holding your energy usage to lower amounts for long periods of time each day.

4. Repairs, Repairs, Repairs (did we mention repairs)

Let’s face it: AC repairs ain’t cheap.

If you wait and hope until something actually breaks, those costs are going to be inconvenient, so it’s best to plan ahead.

Now, when you compare repair vs. replacement, you’ll easily see that continuous repairs to your AC system are going to be expensive! Even with the help of a highly skilled Flower Mound AC repair company, an HVAC unit may start to show its age.

To keep these costs under control, you want to determine a repair cost cutoff – meaning that once you reach a certain point of repair costs, you go ahead and replace the entire AC system.

How do you determine your repair cost cutoff point? Consider this: if a major piece of your AC system fails, like the fan motor or the condenser unit, or the repair cost is approaching to ½ the cost of a new air conditioner system, it’s probably better to upgrade your AC system. You should still discuss all your options vis a vis repair vs. replacement with one of our friendly HVAC professionals, so that you can get a better idea of all costs involved and the lifespan of your current unit vs a new one.

You’ll feel much better about making that choice with all your bases covered.

5. Repairs Often Cost More Than a Brand-New Unit

Sticker shock is real with HVAC repairs. Maintaining an older air conditioner system under the demands of heat in Flower Mound and Lewisville summers is no joke. According to a 2017 report from HomeAdvisor, most homeowners shell out between $164 and $506 on each air conditioner repair call to maintenance companies.

Those really start to add up on an older AC system that’s beyond its service life, and can easily tack on hundreds or thousands of dollars to your cumulative repair bill.

What repairs are these, you ask?

For starters, your AC system could need parts that can be relatively hard to find, or aren’t even in production anymore, which would require custom-built solutions or components that are as close to the original as possible.

Older HVAC systems could also need more labor to diagnose & repair than newer systems. More than one component can also fail at once, which almost always points to replacement over repair, because at that point, the bill is going to be really high.

If the cost of keeping your HVAC system on life support exceeds the cost of a newer, more efficient model, that’s when you know it’s time to invest in an upgrade to your AC system.

6. Boost Your Property Value with a New AC System

Investing in an upgraded central air conditioning system to your Flower Mound home or office could increase your property value by up to 12%, according to information collected by the National Association of Realtors.

Always choose a newer, more energy-efficient AC system when shopping for one. Whether planning to sell your home or not, investing in an upgrade will give your property value a nice boost. Your home will also stand out from other homes in the neighborhood.

7. Better Air Quality for your Family

A very important, but often overlooked function for your HVAC system is maintaining high air quality in your home. Your air conditioner is simultaneously providing ventilation, holding the humidity at an acceptable point, while also filtering particulants out of your air. You and your kids would be breathing these particles without this filtering.

Because modern homes are built for energy efficiency, meaning that they will be as air tight as possible, air inside your home could be up to 5 times more polluted than air outside.

Modern AC systems offer add-ons like whole home dehumidifiers, air filters and air purifiers. These units not only capture minute particles, they are capable of cleaning the air and destroying harmful molds, vapors and germs. The result is that you get a cleaner and healthier living environment for you and your family.

Your HVAC system in your home is there to heat and cool your home, but it also plays a role in cleaning the air. If your current outdated system doesn’t do a good job of filtration and ventilation, it’s another reason to upgrade.

Some HVAC systems have options that will filter allergens like pet dander and dust. If someone in your home suffers with asthma or allergies, this could be a very beneficial option to consider. Good air quality means that everyone breathes better, and that enhances your home’s comfort. Other units have a pre-installed air-purifying and air-cleaning system, which makes your air quality even better.

Are you thinking about upgrading to a new HVAC system? Service Hub of Texas installs new Heating & Air Conditioning systems, and we’re here to help.

Call (972) 449-4463 today, and let’s get started!

8. New, Efficient AC Systems are Better for the Environment

Older, outdated air conditioning systems weren’t made with environmental protection in mind. They tend to use a lot of electricity, and they also use Freon to cool the air. Freon is an effective a refrigerant, it contributes to ozone depletion when it leaks (and old AC systems leak a lot). Modern AC systems use the chemical R-410A instead of Freon. R-410A is just as effective as Freon, but doesn’t contribute to ozone depletion.

The post 8 Reasons to Upgrade Your AC System Instead of Repairing It appeared first on Service Hub of Texas.

source https://servicehubtx.com/8-reasons-to-upgrade-your-ac-system-instead-of-repairing-it/ source https://queerstarks.tumblr.com/post/622784788599799808

1 note · View note

queerstarks · 4 years

Text

8 Reasons to Upgrade Your AC System Instead of Repairing It

Make no mistake, there are times it absolutely does not make sense to upgrade, and we’ll talk about that later.

For now, let’s look at why you might want to upgrade.

1. Save Money by Upgrading Your AC System

The air conditioner is usually the highest energy use appliance in a home, especially in Flower Mound, TX, so it pays to make certain it’s the most energy-efficient appliance, too.

Let’s look the numbers.

A new, more efficient air conditioner system could reduce cooling costs by as much as 20%-50%!

That’s serious improvement, and you can take advantage of that improvement for your home.

2. Reduce the Cooling Load in your Home

When HVAC system pros design systems for residential homes in Texas cities like Flower Mound and Lewisville, one of the main factors they take into account is the home’s cooling load.

The Cooling Load is amount of thermal energy that your AC system must remove from a cooled interior living space so that it can maintain a comfortable temperature range for you and your family.

This “rule of thumb” calculation produces reasonably accurate cooling load calculations for most homes in this area, but always feel free to ask for more information if you like.

3. Your AC Cooling System Is More Than 10 Years Old

Air Conditioner repairs become much more expensive after the 10-year mark, simply because you’re replacing larger and larger components of the system.

Almost all new air conditioner systems work with “smart” thermostats, meaning that you save on utility costs by holding your energy usage to lower amounts for long periods of time each day.

4. Repairs, Repairs, Repairs (did we mention repairs)

Let’s face it: AC repairs ain’t cheap.

If you wait and hope until something actually breaks, those costs are going to be inconvenient, so it’s best to plan ahead.

To keep these costs under control, you want to determine a repair cost cutoff – meaning that once you reach a certain point of repair costs, you go ahead and replace the entire AC system.

How do you determine your repair cost cutoff point? Consider this: if a major piece of your AC system fails, like the fan motor or the condenser unit, or the repair cost is approaching to 1/2 the cost of a new air conditioner system, it’s probably better to upgrade your AC system. You should still discuss all your options vis a vis repair vs. replacement with one of our friendly HVAC professionals, so that you can get a better idea of all costs involved and the lifespan of your current unit vs a new one.

You’ll feel much better about making that choice with all your bases covered.

5. Repairs Often Cost More Than a Brand-New Unit

Those really start to add up on an older AC system that’s beyond its service life, and can easily tack on hundreds or thousands of dollars to your cumulative repair bill.

What repairs are these, you ask?

If the cost of keeping your HVAC system on life support exceeds the cost of a newer, more efficient model, that’s when you know it’s time to invest in an upgrade to your AC system.

6. Boost Your Property Value with a New AC System

7. Better Air Quality for your Family

Because modern homes are built for energy efficiency, meaning that they will be as air tight as possible, air inside your home could be up to 5 times more polluted than air outside.

Are you thinking about upgrading to a new HVAC system? Service Hub of Texas installs new Heating & Air Conditioning systems, and we’re here to help.

Call (972) 449-4463 today, and let’s get started!

8. New, Efficient AC Systems are Better for the Environment

The post 8 Reasons to Upgrade Your AC System Instead of Repairing It appeared first on Service Hub of Texas.

source https://servicehubtx.com/8-reasons-to-upgrade-your-ac-system-instead-of-repairing-it/

1 note · View note

cwproplumbingdalycity-blog · 5 years

Text

Advantages Of A Basement Sump Pump

If your basement smells damp and you live in an area prone to flooding, you probably need to hire a licensed and experienced residential plumber in Daly City for the installation of a sump pump. Water damage repair can be really expensive due to which sump pump is recommended for homes at risk for basement flooding. The following are a few advantages of a sump pump installed at home.

A flooded basement is avoided

When it comes repairing basement due to water damage, you most likely need to shell out thousands of dollars. A professional plumber will install the sump pump at the lowest point of the crawlspace or basement. As water takes the path of least resistance, it flows down to the lowest place at home. Luckily, a sump pump averts water from seeping into the basement. A sump pump is highly recommended in finished basements.

Cooling & heating systems are protected

The majority of cooling & heating systems are tucked away out of sight in the basement. However, if the basement were ever to flood, you could end up spending thousands of dollars to replace the hot water heater, air conditioner, or furnace. By having a sump pump installed in the basement, you can safeguard the expensive cooling and heating system. Every residential plumber in Daly City, CA even recommends the installation of a sump pump backup to power outage issues.

The growth of mildew and mold is prevented

A damp basement is an ideal setting for the growth of mildew and mold. These can be really hazardous to the health of the ones living in the house. Mildew and mold have been known to result in coughing, sore throat, and nasal congestion, and eye and skin irritation as well. In case of asthma or any sort of allergies, you will wish to keep the basement as inhospitable to mold and dry as possible. For this, you need to have a sump pump installed in the basement.

Value of the home is increased

Particularly if your house in the area that is prone to floods every year, you may possibly have better luck after getting a sump pump installed in the basement if you are making an effort to sell the home. Even though homes in the flood zone have a tendency to be less costly in contrast to the ones in other neighborhoods, potential buyers may still be unwilling. However, a sump pump installed in the base can give a potential buyer a peace of mind when one makes an offer.

The soil is stabilized

Water is strong enough to wear away the soil around the home. Luckily, a sump pump is designed to pump water away from the foundation of the home and avert flooding in the basement. Although the yard is dry on the surface, a sump pump in the basement will ensure the damp soil below does not allow moisture into the home.

In order to make the most of the sump pump, make sure you hire a certified residential plumber in Daly City for the installation of a sump pump.

#residential plumber in Daly City

2 notes · View notes

roofcleaningadelaide-blog · 6 years

Text

A Property Managers Guide to Roof Cleaning

If You've been in the property management area for at least a couple of years that the chances are fairly good you've coped with roof cleaning problems. Roof cleaning can be quite pricey, cleaning up after the roof cleansers may also be quite pricey. Fixing the harm that roof cleansers create gets figured to the first estimate since you aren't anticipating damage but it occurs more frequently than not if you're conscious of the possible destruction beforehand you may keep it from happening, limiting the price and headaches and that's what property management is all about.

There are many parasites which can Settle to a roof which are equally damaging to the roofing and repulsive to check at. Moss, lichen, black algae (black mold), green mold/algae compose the majority of removal and matter is now a necessity. Roofs have to be washed for an assortment of motives; to reduce destruction and premature replacement, to restrain greater energy expenses and also to fix the devaluing of their house.

Asphalt shingle, cedar shake and tile roofs are the most frequently affected roofs, each is influenced otherwise.

Asphalt Roofs are ruined more rapidly than others, fungus can develop under shingles lifting them until they crack and drop off. The fungus tendrils or"roots" dig through the reflective granules making them dislodge and drop off, this activity leads to the thinning of shingles just take years from the anticipated lifetime of the shake as they curl and cup.

Cedar roofs Will Need to Stay dry to survive, when a cedar Roof is covered with fungus, the fungus protects moisture from the timber that causes rotting, which prevents wood feeding insects which quickly deteriorates the integrity of the timber.

Tile roofs are Most commonly seen in the south west and although fungus can not ruin tile because it does wood or asphalt, tiles are ruined by having the burden roof cleaners walking around the roof, tile are delicate especially after baking in sunlight for decades, the damage is not clear at first but since the cracks clean out with rain water they'll get dislodged and fall off.

Aside from harmful harm the parasite can trigger, the house Owner can anticipate a gain in electricity bills. Fungus is usually dark colored and dark colours absorb sun which raises the warmth in attics, crawl spaces and top or second flooring causing the air conditioners to work to cool these spaces, leading to greater than normal electricity bills.

To top it off the Vast Majority of the Roof Cleaning Adelaide products available on the market need plants, shrubs and some other leaves around the house to be covered or be continuously wet because the toxicity at the cleaning solution will kill them as cautious as the roof cleansers might be there are always casualties inside the foliage.

With The aforementioned negative ramifications of roofing fungus that the worst to some house manager is that a house or dwelling having a contaminated roof is an"eye-sore", it creates a fairly house appear nasty, it makes a costly improvement look run down or unmaintained, it not only reduces the value of this contaminated residence but also the worth of the neighbors dwelling also, these houses are treated like lepers and more houses capture the disease a leper colony is formed.

It is Now The house management staff typically steps in and need notices are sent outside demanding the roofs be washed. Nowadays you've got annoyed dwelling owners being forced to shell out money, possibly damage their house and a plethora of issues on the horizon.

Two options come to mind; The first is when you've got to get a roof cleaned afterward define that the roofing cleaners utilize a solution which won't damage the leaves or change the expression of the house and the second alternative is known as"preventative maintenance" with this I suggest coating the roofs occasionally using a solution which won't allow fungus to grow, no cleanup is essential and the subsequent drains clean off the uterus that has been eliminated. Appropriate roof maintenance is undoubtedly the most cost effective method to maintain the roofs tidy. Monies could be budgeted for regular roof remedies rather than shocking that a home owners association using a huge budget busting roof cleaning quote. Maintenance spraying may be performed from the gutters border, such as avoiding workers will need to be walking the roofs. Appropriate maintenance program will imply roofs not becoming cluttered, never degrading the visual appeal of this community.

98 percent of the roofing Cleaning contractors are of"old school" comprehension and cleaning procedures that this involves using chlorine bleach because the cleaning compound of choice, which alone is the origin of the foliage harm together with dreadful fumes and odors and discoloration of surfaces. Bleach wasn't invented to wash deep in the cracks and pores of roof stuff, bleach is a topical cleanser. Cleaning a roof with bleach is the equivalent of running a lawnmower through and area of dandelions to wash out the marijuana issue, it looks fine initially but the issue grows back.

Only at Wash Safe we carry roof cleaning seriously, we Devised and eco-safe roof cleaner known as"Roof Wash" which won't damage plants (there is not any need to cover them), it does not have any chemical odors or fumes (actually it's a refreshing citrus odor ), it won't damage the roof at all and retains roofs clean twice as long as bleach since it had been developed to wash deep inside each pore and crevice such a way the comprehensive spore and fungus rooting process has been eliminated.

The Next time your direction company is confronted with a roof cleaning undertaking Establish the roof cleaning contractors utilize Wash Safes Roof Wash and Have them designing a maintenance program for periodic roof coatings and Your roof cleaning issues will soon be history. Preventative maintenance And cleaning using eco-safe Roof Wash, by Wash Safe is the trick to a Clean, stress free future.

1 note · View note

apachepopups · 3 years

Text

Apache Commitment

I just saw your web site as I was looking for parts for my MESA. I enjoyed your story because I have had a similar experience. The first pop-up I traveled in was a canvas loaner from a neighbor when I was a kid. The next year my Dad bought an Apache Ramada which we used for about 6 years before they moved on to a Motor home. I really liked that camper and we traveled throughout Florida where we lived, the northeast and even the southwest over the years we owned it. I remember one of the first modifications he made was to install an air conditioner in the front panel on the tongue followed quickly by a rack connected to the slide outs which allowed us to carry canoes and even a 14 ft. fiberglass skiff.

Apache solid state campers are the best campers bar none. They were ahead of the rest and nothing has come since to challenge their status. They were quality built and one of the best engineered designs around. What I do not understand is why other companies haven't figured out the advantages the solid state campers have.

I bought my Mesa from my brother about 10 years ago. We used it for a few years and then following Hurricane Andrew we lent it to a former neighbor to use while their house was being repaired. The camper was set up and used for 14 months before it was returned to us. Needless to say, it bore the wear & tear of everyday use and constant exposure. Last year I began a massive rebuild because there is still nothing on the market that can touch it. The roof had a crack, the vent leaked water, the cushions were shot, the sink leaked, the inside wood panels had rotted from small water leaks, the windows were brittle and cracked. The end window panels were sagging and leaked as well.

About 11 months later, the camper almost looks like new. Unfortunately I was not able to keep the original theme in the drapes, etc. but it still looks great and renewed. All of the wood paneling (including the ceiling) was replaced with a lighter whitewashed finish which made the whole inside brighter. That included the ceiling, the inside ends, and all of the cabinet doors and faces (including the seating area). The ceiling crack was repaired by removing the top and fiberglassing the inside. When the top was replaced, it was reinsulated to keep the inside cool. A new ceiling fan unit replaced the old one and overhead lights were placed above the sink, above the table, and just above the entrance. The unit did have an air conditioner installed I decided that when I replaced that front end to reinforce the inside of the front shell with a fiberglass reinforced frame. When the A/C was replaced I used some boat molding around the edge of the fiberglass and then silicone caulk it to the A/C. I also had to replace the sink faucet and since the internal water tank was cracked, I cut it down so that it was just a tray to hold the hose and all electrical cords. All new external travel lights were installed. The bearings were removed, inspected, and repacked as well as replacing the bearing seals. The floor had quite a few nicks & cracks so we decided to put a new one on top of the old. While the frames & cabinets were out I cleaned the old floor with Acetone and used the best Armstrong's floor tiles I could find. They really made a difference.

Now comes the last part. To really restore this, there are quite a few of the seals and gaskets which I need to replace. Mainly, they are: 1. The seals on the side panels at the end slide outs. 2. The seal on the ends beneath the slide outs. 3. The pieces above the end windows. 4. The pieces connected to the roof which seal the fold out ends at the roof. 5. The "Apache" lettering for both sides (otherwise I'll create a some kind of Apace sign to go there)

I'm not sure if there are other missing pieces since I don't have any guide to tell me otherwise. Following our first shakedown campout this weekend I plan to add a 12v socket for our Electric Coleman Cooler, and any other 12v accessory. My kids thoroughly enjoyed the weekend and their looking forward to more. I was watching my son do some of the chores that I had when I was a kid (like putting in the poles under the slide-outs).

I was told that some others have added 2 - 12v batteries to the trailer tongue for remote locations but I'm not sure that the extra weight there is a good idea . I'll follow some of the links you provided but any direct assistance would be appreciated.

John Hampp

- Original posts and stories from the Apachepopups website that have been reposted here to preserve them for future Apache camper enthusiasts

#apache camper #apache popup #apachepopups.net #apacheowners.com #Vesely

0 notes

ochards · 4 years

Text

Pet Allergies- Can My Pet Get Allergies--

CAN PETS HAVE ALLERGIES?

The moment it has to do with ascertaining whether a pet or dog gets allergies, even a lot of people don't find out how exactly to go ahead. As an example, it's necessary to search for your signs. The truth is that were you aware some puppy allergy symptoms indicators are like the people which human beings show? They really are. Probably one among the absolute most commons indicators your furry friend could get an allergy is should they truly are continuously itching by themselves. The following hint is the fact that skin discomfort. Together with that said, persistent itching and skin discomfort frequently go together.

for how your cat or pet could be medicated should they've allergies, then it's better for you to abide by the help of the own vet. That really is only because a number of those prescription drugs prescribed can function as creatures just, however, a few may possibly even be individual prescription drugs. The single issue is the fact that maybe not all of the prescription drugs are perfect for canines; thus, it's crucial to follow along with the recommendation of the veterinarian. In terms of remedy, most urge antifungal and antibiotic lotion for eczema or illnesses which might have been grown to the epidermis area. Other preventative ways will probably be studied. As an instance, in case your puppy is allergic to some particular bud in the garden, you can have to eliminate it keep your pet in the space. Even though the procedure made available is very likely to alter, many possibilities will instantly offer aid to animals which are afflicted by

Though it's relatively simple for several owners to decide on whether their animals are all afflicted by allergies, even a few continue to be not sure. If this describes you personally, you might require to seek out medical care for the pet, cat, or some additional pet that might have allergy symptoms. A vet could execute lots of evaluations, in addition, to test your pet's skin to find out whether they're afflicted by allergic reactions. Ahead of you choose your pet into the vet, then you're invited to jot any inquiries you could have or anything else which may possibly have brought about you really anxious. By way of instance, did your pet begin itching following becoming into weeds off your own backyard? Can you change their pet-food give them a brand new furry friend toy or even just a fresh pet mattress? If that's the case, your veterinarian ought to understand.

One of many causes, why it's a fantastic notion to choose your own puppy or kitty into the veterinarian, is really because you'll likely wind up undertaking anyways. Quite a few humans can quit itching, even even as soon as the impulse to accomplish this seems quite uncontrollable. Clients about the opposite side, are not necessarily competent to achieve that. In the event you see your puppy is itching per particular region of the human body for at least a couple of times, then a trip to the vet might be to be able. Exactly the exact same ought to be mentioned, in the event you see a skin rash or some other cracked skin. If left untreated, your dog can develop into a disease, and it is clearly worse which simply becoming allergy symptoms.

If lots of people consider allergies, even individuals, individuals, are frequently the first thing that comes to the brain. You will find countless of people in America, independently, that have problems with allergic reactions. These allergy symptoms could possibly be a result of mold, food, mildew, in addition to the current weather. Even though humans would be definitely the absolute most often encountered victims of allergies, why were you aware pets may additionally build allergy symptoms? They really can. The truth is that dogs will be definitely the absolute most often encountered creatures that have problems with allergic reactions.

DOG ALLERGIES

Vacuuming just as far as potential will be one other means to deal with the outward symptoms which you can well be undergoing because of getting your pet dog allergy. Along with cleaning regularly, don't forget to have an excellent, close look in the vacuum cleaner that you use. You'll find currently floor cleaner using HEPA filters plus also they are highly rated as well as advocated. The truth is that you can find some floor cleaner which is geared in the direction of and promoted to pet-owners. You ought to test those floor cleaner.

Are you currently a dog owner who believes you can well be allergic to some furry friend? If you're, you may possibly well be searching for direction. After all, there's not a thing worse than understanding that you're allergic to a pet or pets.

for how you are able to begin fixing your own dog allergies which can be brought to a furry friend, you also can take away your pet out of your residence. If you're not able to accomplish this or in the event that you decide never to, then you might require to determine whether you may discover that it's a fantastic residence. Pals or relatives that are eager to simply take your furry friend have been frequently regarded as the optimal/optimally selection. Even in the event that you'd like to continue to keep your puppy on you, there continue to be numerous steps you may simply take to find aid out of several frequent pet allergic indications.

Purchasing an air conditioner is just another manner you may find assistance out of a pet allergy, even with no to come across a brand new house for the pet. Air purifiers work by detaching atmosphere pollutants, for example, pet dander. It's wise in the event that you hunt online for air compressors which can be intended to support people who have allergy symptoms. These air compressors can readily be seen using a normal online look for. Additionally, HEPA air filters and HEPA air compressors are well famous due to their excellent outcomes.

Still another amazing tip will involve maybe not permitting your dogs or canines grow in your own furniture. That is especially essential whether you enjoy to lay back on your own sofa or break into a reclining seat. You don't need pet dander and hair from the mind area. In the event that you have to, handles is utilized. Additionally, there really are a lot of fabric design covers that are properly used. They're a wonderful alternative to these unsightly plastic addresses. Keeping that in mind, in case you utilize cloth covers, then don't forget to scrub them each and every couple of times or if overly much pet accumulates.

The very optimal/optimally method to restrict your hypersensitivity which may result from your own dog will be to maintain your dogs or puppies from your own bedroom. The sack would be your space where people spend the majority of our time. For the explanation, your dogs or dog should really be kept from your own bedroom. Doing this can restrict the range of annoying outward symptoms that you are present. It can additionally be helpful to get you a nice night slumber. Along with this bedroom, so it's likewise essential to test different chambers you can shell out a fantastic part of one's energy. Think about maintaining your dogs or canines outside of this room also.

Among those first matters, you might desire to accomplish would make certain you have a pet allergy. Some times, the signs of giving birth to a pet allergy may result from additional allergies or even from some other health condition, like influenza or even the frequent cold. People that suffer from pet allergies can encounter a runny nose, coughing, sinus congestion, postnasal drip, and build up a skin rash, or possess difficulty breathing. In the event, you undergo acute allergies or in the event that you'll really like conformation you do possess a pet allergy, then program an appointment with a health care practitioner.

The aforementioned steps really are a couple of many steps you may simply take to find rest from allergic reactions you could well be affected because of intimate connection by means of your puppy. As a reminder, a physician might be in a position to prescribe one prescription drug medication or urge non-prescription services and products which can do the job as well. That explained, bear in mind that fixing allergies, even notably pets allergies, and by natural means is commonly substantially less hazardous.

CAT ALLERGIES

Along with maybe not cooperating along together with your cats or cat, it's likewise encouraged that you simply maintain them from your own household furniture. This consists of your own beds, reclining seats, or sofas. That is especially essential when you're understood to lay or rest in your own family area home furniture. Covers really are a great option. If you opt to make use of cloth addresses, that might be somewhat more appealing, then don't forget to scrub them each and every couple of days or once you see a huge accumulation of hair thinning.

for how you are able to find aid, the optimal/optimally method is always to clear away your cats or cat in your residence. Regrettably, that is simply not therefore possible for lots of cat proprietors to really do. In the event that you are unable to locate a really fantastic property for the cats or cat, for example using a trustworthy friend or relative, you don't have to be concerned. There continue to be quite a few steps you may simply take to look for aid.

Still another tip calls for help keep your cats or cat outside from the bedroom. Because it once was explained, maintain your cats or cat away from the own mattress. This is able to enable you to sleep at nighttime time. But just keeping the cats or cats outside of one's chamber generally is your optimal/optimally technique. It really is very likely to lead in relief, even since the sack is just one among the absolute most often encountered rooms at your house we utilize; thus, it really is the place you would like to find relief that the maximum.

Among those first matters you might wish to accomplish should you guess which you're afflicted by the cat allergy or different pet allergies would be to check your outward symptoms. Would you wind up scratching, using a runny nose, or together with sinus congestion, or postnasal drip whenever you're on the cats or cat? Additionally, does one some times produce a skin rash immediately after closure touch or does one discover that it's hard to breath devoid of difficulty? If that's true, you can additionally possess a cat allergy. If that's true, it can become a smart notion to schedule a meeting with a physician. A health care provider may not just prescribe one drug, nevertheless, they could possibly have the ability to assist you to ascertain whether you genuinely own a pet allergy symptoms.

Perhaps not Sticking together with your cats or cat is really a significant approach to cut back your signs or symptoms which can be a result of some cat allergy. Close experience of a kitty is just one of many ways in which skin rashes, such as individuals who resemble a psoriasis epidemic grow. As difficult as they are on love and also love your critters from afar, you can want to accomplish this, especially in case your allergies signs and symptoms are intense.

An air conditioner may likewise be properly used and ought to be properly used if you're allergic to a furry friend. These air compressors remove most likely harmful pollutants out of the atmosphere. This consists of pet dander. For those who own a cat allergy, then the elimination of pet dander out of the atmosphere may be a fantastic supply of alleviation. You may find and research air compressors which can be promoted to people that go through form allergic reactions online. Much like floor cleaner, air purifiers that use HEPA engineering, regularly create the most useful outcomes.

Are you currently a cat operator who supposes you could well be allergic to animals? In the event you have a cat allergy, then you might well be wondering exactly what you've got. If you're searching for advice, then you might require to keep on reading, being some tips for owners that are allergic to their animals have been summarized under.

Vacuuming just as far as potential will be just another amazing means to set a limit on the quantity allergies symptoms you could have brought to cats or cat. Vacuuming might help pick up a number of their furry and pet dander which might maintain your residence. Floor cleaners using HEPA filters are highly rated as well as advocated. There is also a range of vacuum cleaner cleaners that can be promoted to pet-owners. You might need to provide these sorts of floor cleaner an in-depth appearance.

#Lifestyle

0 notes

kevinzhang1688 · 4 years

Photo

Construction Machinery Instrument Cluster Box

The construction machinery instrument cluster box for construction machinery is an integrated air-conditioning instrument system. The shell of the box is injection molded , which is embedded with instruments, air conditioners, air-conditioning storage rooms, condensers, condenser fans, drying tanks, expansion valves, evaporators, blowers, radiators, and temperature sensitive packages，it also can embedded the ignition switch,light switch,air conditioner controller according to your requirement. It uses air conditioning for cooling, and engine cooling water radiator for heating. Drivers can feel comfortable in summer, drink cool drinks, and eat warm meals in winter. It is widely used in construction vehicles such as bulldozers, excavators, motor graders, road rollers, etc.

We Provide Customized Instrument Cluster Box To You Needs.

We Are 24 Years Professional Manufacturer, Providing Customized And OEM ,One Station Solution.

The instrument cluster is the main source of information for drivers. With the instrument cluster all relevant engine data are presented clearly , it permits the operator to check the operating condition of the machine and provides the operator with various types of information which make it easier to operate the machine efficiently. Our instrument clusters offer premium image quality and allow a wide range of user customizable options.

Feature:

l Ergonomically designed，highly resistant stand-alone solution for in agriculture and construction machinery and special vehicles markets

l Optimally protected against fluids and dust

l Cost-optimized product solution

l Modular product concept and customizable

l Can be integrated into Driver's Workplace

24 Years Professional Manufacturer Customized Special & OEM One-Station Solutions

zhinengcab.com

[email protected] +86 15866092558

0 notes

hanking-mould-blog · 5 years

Text

Plastic Parts Gallery

It is a complex task to design plastic parts involving many factors according to varoius requirements for different industires. "How is the part to be used?" "How does it fit to other parts in the assembly?" "What loads will it experience in use?" The plastic injection molds if classified from product function, various different plastic parts can be produced by injection molding:

Plastic automotive parts include door panel, door handle, base door, dashboard panel, instruments panel, front and rear step pedal, centre panel, chair panel, front and rear bumper, wheel cap, wheel cover, wheel brow, cup holder, belt cover, front grille, grille radiator, rain tray, main panel housing, mirror cap, fan, filter, air vent, license plate frame, side fender, seat fittings, seat travel tray, mirror housing, auto headlamp holder, rear light shell, brake light, steering system, lever column, alternator cover, worm wheel, ball retainer, reservoir and cap, brake fluid reservoir, water pump impellers or pulleys, water tank, signal switch hsg, air conditioner parts, glove box, speaker cover, engine parts, console parts, mudguard, trim strip, gear shift cover, bump stopper.

Medical devices' plastic parts include disposable medical parts, lab equipment, dental equipment, atomizing switch, blood glucose measuring instrument, ultrasonic instrument, blood pressure measuring instrument, beauty equipment.

Home appliances plastic parts include small kitchen appliances, coffee machines plastic parts, fryer cooker, kettle plastic parts, food processor, toaster, vacuum cleaner, blenders plastic components, clocks plastic housing, steamer accessories, cleaner plastics, heating, cooling & air purifier, remote controller, large appliances, wash machine parts, home projectors, refrigerator plastic components.

Industrial plastic parts include industrial wheels, industrial gears, plastic storage bins, plastic industrial tanks, plastic valves, plastic connectors, industrial fan, etc..

Electrical Molding Parts include all the electronic plastic parts and electrical plastic accessories.

In addition to functional and structural issues, processing issues play a large role in the design of an injection molded plastic part. How the molten plastic enters, fills, and cools within the cavity to form the part largely drives what form the features in that part must take. Adhering to some basic rules of injection molded part design will result in a part that, in addition to being easier to manufacture and assemble, will typically be much stronger in service. Dividing a part into basic groups will help you to build your part in a logical manner while minimizing molding problems. As a part is developed, always keep in mind how the part is molded and what you can do to minimize stress.

https://www.hanking-mould.com/products/plastic-parts-gallery/

#hankingtec

0 notes

cathrynstreich · 5 years

Text

15 Best Questions to Ask When Buying a House

(TNS)—Before making an offer on a house, you want to be absolutely sure that it’s “the one.” But with so many options out there, how do you find your perfect match?

Finding the right home involves research, so you’ll need to ask the right questions. That way, you know you’re making a competitive offer on a home that you can afford—and meets your long-term needs. To weed out the duds from the diamonds, here are 15 questions to ask when buying a house.

What’s my total budget? It could be a waste of time to start looking at houses without understanding how much house you can afford. There are additional costs to consider other than the sales price, such as property taxes, homeowners insurance, homeowners association dues, ongoing home maintenance and any renovations you want to do.

“With all the other added expense that comes with homeownership like repairs and homeowner’s association fees, you may not see the financial benefits for several years,” says Wendy Mays, a REALTOR® with Berkshire Hathaway HomeServices California Properties in Chula Vista, Calif.

Showing the seller you have the financial means to buy their house is important if you want your offer to be accepted. This means getting preapproved for a mortgage.

“Not only does it give the buyer an idea of what they can afford but it gives the REALTOR® assurance that they’re showing a qualified buyer a home,” says Joey Sampaga, a REALTOR® with Keller Williams Legacy One in Phoenix. “It shows you’re not wasting the seller’s time.”

Is the home in a flood zone or prone to other natural disasters? A property that’s in a flood zone or other natural disaster area may require additional insurance coverage. For example, homes that are located in a federally-designated, high-risk flood zone require flood insurance. (Find out whether a property is in a high-risk flood zone using FEMA’s Flood Map Service.)

Likewise, if you’re buying a home in California where earthquakes are common, you may need to get earthquake insurance. Another tip: Make sure you purchase enough homeowners insurance to cover the cost of completely rebuilding your home if it’s destroyed. If you’re underinsured, you could be left footing a massive bill to repair or rebuild your home if a major disaster hits.

Why is the seller leaving? Understanding why the seller is moving—whether it’s due to downsizing, a job relocation or as a result of a major life event—might help you figure out how motivated they are when negotiating. A good buyer’s agent will try to find out this information for you and gauge how flexible (or not) the seller might be during negotiations. A motivated seller who needs to move quickly or whose home has been on the market a while is more likely to work with you than someone who isn’t in a rush to move.

What’s included in the sale? Anything that’s considered a fixture is typically included when purchasing a house—think cabinets, faucets and window blinds. However, there could be items that you think are included with the home but actually aren’t. This depends on your state’s laws. The listing description should spell out any exclusions that the seller is not including, but that’s not always the case.

Make sure to ask in your offer what is (and isn’t) included with the home. Do you really want the washer and dryer, or that stainless-steel refrigerator? Ask if the seller will throw these items into the deal.

Were there any additions or major renovations? In some cases, property records and listing descriptions don’t always match up. A home might be advertised as having four bedrooms, but one of those rooms may be a non-conforming addition that doesn’t follow local building codes. Find out what major repairs or renovations the seller has done since owning the home, and request the original manufacturer warranties on any appliances or systems if those have been replaced. Knowing a home’s improvement history can help you better gauge its condition and understand the seller’s asking price.

How old is the roof? Let’s face it: roofs are necessary and expensive. If a home’s roof is at the end of its lifespan and you wind up having to replace it shortly after move-in, you’ll be shelling out thousands of dollars. Ouch. If the roof has existing damage, your lender may require that it be repaired in order to approve your loan. In other words, if the listing description doesn’t list the roof’s age, make sure to find out ASAP to avoid a costly headache later.

How old are the appliances and major systems? Again, understanding the anticipated lifespan of essential systems and appliances, such as the air conditioner, furnace, water heater, washer, dryer and stove, can help you anticipate major repair or replacement expenses. If these items are already at the end of their lifespan or near it, ask the seller to purchase a home warranty, which can help cover the replacement costs in certain instances.

How long has the house been on the market? The longer a house has been on the market, the more motivated the seller will be to make a deal. This means you might find flexibility to negotiate the price, contingencies, terms and credits for replacing outdated carpet or other noticeable issues.

Many times, a home will languish on the market if it was priced too high at the onset, resulting in the need for multiple price reductions. A listing that shows multiple price cuts and has been sitting on the market too long may give buyers the impression that something is wrong with it—and that gives you a prime opportunity to negotiate a deal.

How much have homes sold for in the neighborhood? Understanding the current local market will help you determine if a seller’s asking price is on target—or way too high. Your REALTOR® can pull the comparable listing data for similar homes that are currently on the market and have sold in the last six months or so as a basis for comparison.

“If conditions support further negotiating, consider (making) a lower offer or even concessions like asking the seller to pay for some closing costs,” Mays says.

Are there any health or safety hazards? Items like lead paint, radon, mold or other major hazards can be costly to address and hold up your loan approval. Ask the seller to provide documentation if there have been past issues and find out exactly what was done to resolve those problems. If you suspect hazardous problems or a home inspector suggests additional testing, you might need to pay extra for those specialized services.

What’s the history of past insurance claims? Get a copy of a Comprehensive Loss Underwriting Exchange, or C.L.U.E., report from the seller to see if there have been any homeowners insurance claims filed in the last seven years. This report can give you an insight into what, if any, damage the home has sustained from a weather event or vandalism that a home inspection doesn’t catch or a seller fails to mention.

What are the neighbors like? Getting the true feel of a neighborhood can be difficult before moving in, but this aspect shouldn’t be overlooked. Ask the seller what the neighbors are like. Noisy or quiet? Is it a pet-friendly place or are there few pets around? Are the existing neighbors friendly or more likely to keep to themselves? Don’t rely solely on the seller to reveal these details because you might not get the full story.

“Drive the neighborhood and stop and speak with neighbors,” Mays suggests. “Neighbors are an excellent way to get information about the community that a seller might not want to share.”

How is the neighborhood? You can always change a house and fix things you don’t like, but the neighborhood is there to stay. It’s important that you like the environs you’ll be living in for the next 10, 20 or 30 years. Your REALTOR® can help you find out key information, such as community amenities, crime statistics, school ratings and how busy traffic is where you’ll be living.

Thankfully, the internet is also a great resource where you can research schools, homeowners association rules (if applicable), nearby parks and other amenities—and don’t forget to time your commute to work, which might be a deal-breaker.

Are there any problems with the house? Sellers are required to provide a disclosure form listing any known defects, but what they don’t disclose and you don’t know can lead to major issues later. That’s why it’s critical to get a home inspection done by a professional home inspector as soon as a purchase agreement is signed.

The inspection report outlines the home’s overall condition and can help you negotiate future concessions, such as repairs or seller-paid credits, before closing the deal. If a home has too many problems and you included a home inspection contingency, you’ll be able to back out of the deal without penalty and (in most cases) get your earnest deposit returned.

How much will I pay in closing costs? The down payment isn’t the only cash you’ll be forking over on closing day. You’ll also be responsible for closing costs, which typically include loan origination fees and third-party fees for title research, processing of paperwork, an appraisal and other administrative tasks. Expect to pay around 2 percent to 5 percent of the home’s purchase price in closing costs, but that can vary depending on your area.

The closing disclosure, which a lender is required to provide you three business days before closing, will spell out all of your loan fees and how much cash you’ll need to close.

“Once the closing documents are signed by both parties and the escrow company sends it to the lender, the lender will fund the loan,” Sampaga says. “Now you’re a homeowner.”

The post 15 Best Questions to Ask When Buying a House appeared first on RISMedia.

15 Best Questions to Ask When Buying a House published first on https://thegardenresidences.tumblr.com/

0 notes

batmultilayer · 4 years

Text

Companies do everything possible to improve

Companies do everything possible to improve their adaptability, technical standards, equipment, management and efficiency, etc. This trend has led to the continuous improvement of the standardization of molds, higher and higher mold accuracy, shorter and shorter production cycles, and lower and lower ratios of fitters, which ultimately promoted the continuous improvement of the overall level of the mold industry. China's mold industry currently has more than 10 national high-tech enterprises and about 200 provincial and municipal high-tech enterprises..　　

Vigorously improve the development ability, push the development work forward as much as possible, until it is involved in the product development of the mold user, and even develop before there is no clear user target, turning passive to active. This is not only a change in the means of production, but also a change in the mode of production and a rise in concepts. In the information society, as a high-level modern mold company, the application of CAD/CAM is far from enough.　　

With the improvement of the design and processing level of mold companies, mold manufacturing is changing from relying mainly on the skills of fitter to relying mainly on technology