#category-/Computers & Electronics/Consumer Electronics

[inventivaindia]

Fitbit and Samsung heart rate monitors may be inaccurate on dark skin

Fitbit and Samsung heart rate monitors may be inaccurate on dark skin

It goes without saying that the performance of a key feature in wearables — heart rate measurement — should be uniformly accurate across users regardless of their ethnicity. But a report from Stat suggests that some of the most popular wearables, including models sold by Fitbit, Samsung, and others, are inaccurately measuring the heart rates of people of color, an issue attributable to reliance…

[vapormaison]

2019 Best Vinyl Pressing 1/4: 魂のための歌 by 憂鬱

Preface: Throughout the month of December, Vapor Maison will be nominating  “BEST OF” albums of 2019. Slots will remain open for this month’s releases. Categories include Best Vaporwave Release, Best Future Funk Release, Best Re-Release (V & FF), and Best City Pop Re-Release, among others. This is one nominee for best Vinyl Press.

Author’s Note: For the writer’s ease of writing and readers ease of reading, I’ll be using the transliteration of 憂鬱:Yūutsu, and the translation of “Soul’s Song” in lieu of “魂のための歌”. I’ll maintain the Japanese track listings for easy reference. Apologies to Purity, a maiden as tedious as she is cruel.

Are the merits of a vaporwave album on vinyl even worth reviewing?

 Obviously, you’re reading a vaporwave vinyl review — creating a sort of circuit — so in the strictest sense of the word, yes, — but naturally, a follow up question must be asked by any smart music consumer. If so much of vaporwave, and by extension future funk, is centered around digital manipulation of either computer programs (vocaloid, electronic loops, midis, drum kits, etc), and pre-existing digital rips of j-pop (by definition most of future funk) — what’s the point of a vinyl press? Pressing mp3s onto vinyl is pointless — as no amount of “warmth” from a vinyl-based Hi-Fi system will ever make up for a low-quality source. What’s more, the indie releases of these tracks can make it hard to justify an expensive vinyl mastering session. In my most unfortunate purchases, I’ve had MP3s outperform certain 45s.

But sometimes, you can get just the right format, just the right mix and master, and it just makes your hifi set sing. You, as a Vaporwave/Future Funk/Chillwave/etc. enthusiast, can certainly approach the sonic repro quality of lore — that Platonic form of an “audiophile’s album”. How can I prove this? Look no further than Soul’s Song by Yuutsu. Point blank, full stop. This is the one of the rare vapor records for a true audiophile. In this next section, I’ll be giving my thoughts on the album’s tracklist. In Part 2, you can join me for a trip into Hi-Fi World for a discussion of Vapor-Vinyl’s legitimacy.

PART 1: THE MUSIC

小さい鳥 opens the album with a moody, synthetic mandolin-like twang and elegiac Vocaloid vacillations extended in a sort of melancholic embrace that brings you — willing or otherwise, into the arms of this project. The arrangement of the loops are of particular note here, with the layering of additional sonic flutters that culminate in an anti-climactic crescendo that leaves you as sad and disappointed as the album no doubt wants you to feel.

それは愛を返さありません ends up being the most “atmospheric” of all the tracks, a listening experience I’d describe as a fitting background track for a KEY visual novel — eerie, haunting monosyllabic Vocaloid chants of comprising the long, long hooks. While running at 5:24, it definitely feels longer — perhaps created by a symphonic discord between vocals and music at intermittent portions of the piece. I’d characterize this piece as the most experimental of the album, deftly playing with my expectations more than any of the others.

闇 is incredible — and without a doubt the highlight of the tape. Because it departs from the simple string looping and gives us something more — something resembling a tragic and contemplative harmony, however discordant, and one that builds into lyrically what I consider to be a genuine contemplation of spirituality and the other world — a natural place, topically, for an album titled “Soul’s Song”. A sort of hollow computerized synth also left me considering — was this song about the soul of the Vocaloid program itself?

The digitized horns, eerie synths, and what I could best classify as the crackling of amplifiers introduce the thirty-eight second interlude of 変更 and serve as the riser to the climactic shift of the EP beginning in おやすみ. This four-minute piece deftly blends electric and analog strings and brings the vocaloid program to its emotional and sonic heights, really making the high-end pop in a for a surprisingly refreshing experience.

We conclude the album with a hybrid piece ネコチャン which captures the electric energy of おやすみ, the distorted samples of 変更 and adds a fleeting feeling of warmth with that familiar sound of tennis shoes on a waxed gym floor, evoking nostalgia that never was of doldrum days in a Japanese high school. The album fades out, with our familiar vocaloid’s calling out of Neko-chan, melting away like memories.

PART 2: THE VINYL LISTENING EXPERIENCE

When re-starting this review blog in earnest over the past month or so, I made a point to get my best gear serviced. I couldn’t claim to be fulfilling my broadened duties without having a fully-serviced, properly functioning kit. One of the more essential and dreaded refurbishments was getting my KEFs over to the local stereo shop wizard for a re-foam. I’d be without my workhorses for a week: an audiophile Alexander without his binaural Bucephalus. In the meanwhile, my backup speakers — a pair of Cambridge Audio SX-50 bookshelf speakers that I use as computer monitors, stepped up to the plate as pinch hitter.

I provide this anecdote for a reason: the very afternoon I dropped my KEF’s off at the shop is also the afternoon I received my copy of Soul’s Song by Yūutsu.

Admittedly, I can’t say I was particularly hyped for this release, or very eager tor receive it in the post. The previous evening I had been sleeplessly experimenting on a DJ set of city pop for the journal’s launch party at my alma mater. I was decidedly on an upbeat, caffeine-fueled kick of positive thoughts and big dick energy. Success had triggered the dopamine receptors, and the idea of sitting down for a serious listening session of an album that many BandCamp users had dubbed as “peak sadwave” seemed like an unnecessary vibe check.

But— being a self-appointed music blogger— a craft which I imagine has real pretensions about it somewhere, I buckled —a serious listening session was attempted.

And I was utterly blown away.

***

A final word on gear. The Cambridge SX-50s — and Cambridge Audio in general— do have a bit of a cult-following among guitar enthusiasts in various audiophile spheres. I also am familiar with a listening bar in Nagoya (where I studied abroad for a semester) that uses top-shelf Cambridge Hi-Fi gear solely for Vocaloid listening sessions!

Suffice to say, I was not actively thinking about either of those two facts when I first let the needle drop, but when the twangy synthetic guitar loop and the eerie vocalic chants of それは愛を返さありません began, a sudden wave of melancholy set in and brought my mind back to a lonely winter spent in that basement bar after breaking up with my girlfriend. And to the Cambridges. At that time, I became intimately familiar with how an upbeat, poppy — sometimes even jazzy track— accompanied with Vocaloid vocals could really make those speakers sing. And it was happening right now, as I was cuddled by the warmth pouring from those drivers in spite of the cold sadness of the arrangement. That dichotomy was on full display as “Ya-aa-mi” invocations of 闇 reached its penultimate hook.

In may respects, these Cambridges were and still are petty. I had previous experience with them butchering a poor quality vinyl of the Luxury Elite/Saint Pepsi Late Night Delight EP two years ago. My KEF’s usually take it upon themselves to run cover for a bad release. Cambridge-chan couldn’t be bothered. On a bad day, with a bad play, they’ll seem like the most clinical JBL studio monitor — but here they were, absolutely singing. This album was making them slap — metaphorically. And that’s when I realized what a magical press this was.

Five days later, the KEFs were securely hooked up to my amp again. The first vinyl to be put through the paces was, of course, Soul’s Song. Again I was impressed. The exquisite layering of this album can’t be expressed enough — and while the SX-50s brought out the synthetic string and vocals to the fore, my 104s filled in the rest of the sonic picture. I felt as if I was being re-acquainted with a piece of sculpture upon viewing it from a different angle, or witnessing a church’s mosaic in person after seeing a small reproduction in a well-printed textbook. This is a pressing far and above the previous standards I’ve set for vaporwave.

***

As any Vapor Vinyl review would be incomplete without a brief take on the overallＡｅｓｔｈｅｔｉｃ of the release, so I’ll just start by saying that I really enjoy the three-tone front end. The lavender, beige and white undeniably make this a very “Aloe” release, who tend to make things easy on my very nearsighted eyes by never making the cover too busy. This is perhaps with the notable exception of VR 97’s recent cassette release — not a trend, I hope!

I do have to admit I’m getting a bit tired of pink vinyls, though — and Soul’s Song unfortunately now joins a very crowded pack. I suppose if you were being pedantic, you could compare the “pinkness” of the album vis a vis the 2nd pressing of Macros 82-99’s Sailorwave (fuller, more saturated), or even the “bubblegum” first pressing of Vektroid’s Floral Shoppe (just naming two iconic releases) — but I think this release would have been fine (and moved units) as, say, a picture disc — making use of the powerful, emotive cover art to its fullest extent. In short, it takes something unique and then commodifies it to the point of exhaustion. While I suppose this criticism could be leveled at all of the genres I cover— I think generally speaking Vaporwave and Future Funk (to a lesser extent) treads this line of “capitalist critique” and “modified consumption” rather adeptly.

The main thrust in the previous paragraph, I should qualify, is not a specific criticism of Aloe City Records, however — I think they’ve done a fine job generally. If I could make a list of three releases that justify a special edition vinyl — this is certainly one.

For audiophile vaporwave/chill-wave fans, I’d encourage you to snap it up while you can.  You can even buy it ethically — it’s still in stock on Aloe City’s band-camp page. It’s in my mind — without doubt — one of the best presses of the year.

[shineclicker]

5 Best Free Classified Websites in India

You all are aware -that most free advertising sites are constructed for local businesses’ promotion in a classified ads layout.

You do not have to spend your savings on promoting your business on paid campaign budget now Because Advertisement posting platforms are doing your job easy for you by making available the option for you to sell your Services and products on the classified platform. You don’t have to think about reaching your target audiences.

Now, what else is the question that may be fallen for you?

Looking For free Classifieds posting sites?

Your Business is newly started and wants to promote your business so that people are aware of your services and products. Here you are on the exact platform.

What is classified Submission?

Classified Submission is the process by which a classified document is prepared and submitted for storage in the appropriate repository. This involves creating a classification label for each item, including a description of its contents or any distinguishing features or characteristics.

Classified Submission is simple as it is one of the best ways to share information, like pictures and documents. By uploading your file to the classified submission website, it provides a specific location where you can directly send files, including photos and documents. It’s not just about having your file saved with no place for it to be released otherwise left on your computer or external hard drive, this service takes care of everyone’s privacy when doing business online.

Here’s the list of the Top 5 Indian Sites to Post Free Classified Ads:

1. Craigslist

2. OLX

3. Shineclicker

4. Locanto

5. Adpost

1) Craigslist:

Craigslist is an American classified advertisements website with sections devoted to jobs, housing, for sale, items wanted, services, community service, résumés, and discussion forums. Craigslist is a classified ad posting platform that enables you to post advertisements for your Business. The Business Profile is then open to consumers to leave reviews. You can add photos of your product or services.

Website: www.craigslist.org

2) OLX

OLX is the ad posting site. When you list your products through an OLX Classified Ad, you state a price, the buyer contacts you and both of you finalize the product sell or buying deal.

Website:www.olx.in

3) Shineclicker

Shineclicker is the perfect classified platform to buy and sell your product or services locally! No need to visit the market to find the best deals on the pre-owned product!

Shineclicker is a free classified ad posting website for Second-hand cars, used electronic items, jobs, Real Estate, and Services ad posting. You don’t have to spend a single penny for your product promotion.

Website:www.shineclicker.com

4) Locanto

Posting an advertisement on Locanto free classifieds is very easy and works just like the classified ads posted in the local newspaper classifieds. Except that Locanto enables you to post your free classifieds ads are featured for as long as you would like, and therefore reach a much larger audience!

Website:www.locanto.com

5) Adpost

Adpost is a classified listing site where people can buy, sell, or rent their next Vehicle here! Job Listings for Employers and Job Seekers! Real Estate & Rental Listings, for your home or office! Various categories are available to post advertisements for services and products. The Adpost site has an option for different countries so that people can choose their targeted countries. It is available on local and global platforms.

Website:www.adpost.com

Ad Posting Categories on Shineclicker

1. Cars and vehicles

2. Mobiles and Tablets

3. Electronics and appliances

4. Jobs

5. Real Estate

6. Home and Lifestyle

Shineclicker Listing Features:

1. Post-Free Ads

2. Post your Item and get buyers online.

3. Find — faster and easier buyers in your locations

4. Increase Online Visibility

Shineclicker let helps you to get the Backlink for your website and will be beneficial to generate quality traffic for your business. You can visit our website to buy & sell all kinds of office and home furniture.

Shineclicker offers a wide range of home and office furniture, such as office tables, chairs, cabinets, partitions, sofas, wardrobes, beds, dressers, dining tables, and so on.

Benefits of Classified Submissions Sites

1. You can improve your online traffic with the help of classified submissions.

2. It is one of the modern ways to improve or boost your business.

3. Your business can get higher earnings.

4. It will create brand awareness for your business.

5. Nowadays- people get the help of classified sites to create top backlinks which can again generate more traffic.

6. Easily Operated- The classified ad websites are structured specially to attract many potential consumers.

7. Cost-efficient approach

8. 24 x 7 available for posting advertisements

Conclusion:

We are here to help you with your business promotion in all possible ways. You can get free classifieds posting sites. And we provide you with a platform where you can promote your services, products, and business as well. It’s clear why Shineclicker platforms are best because we provide tons of exposure for new ventures in terms of attracting new customers through appealing demographic profiles as well as promoting their products & services on a wide range of forums; thus providing better visibility to its customers as compared to other platforms like Craigslist, Clickindia,locanto.

[educationtech]

What is the best future for electronics and communication engineering - Arya College

The branch of engineering dealing with electronic gadgets and gizmos, circuits, and the various types of Communication equipment like the IC (integrated circuits), receiver, transmitter, ECE (Electronics and Communication Engineering) is one of the most rapidly rising course-fields for the students of best electronics and communication engineering college in Jaipur. The degree of Electronics and Communication Engineering is compiled in a core of Electronics Engineering and along with that an elective on Communications Engineering. It aims to focus on improving the communication skills of an individual along with an in-depth knowledge of the subject of electronics engineering. In other words, the subject matter is involved with the process of transmission of corresponding information across a channel through coaxial cable, optical fibre, or free space.

Future Scope And Opportunity For ECE Students

As a result of combination of electronics and communication mediums into a huge number of new industrial verticals, there are various opportunities for students and freshers for ECE background. Some of the latest technologies includes automation in industries, self-driving cars, robotics, autonomous drone logistics, smart energy systems etc.

Engineers of top engineering colleges in Jaipur have occupied thousands of opportunities in India. Whereas Electronics engineers holds more job opportunities in India. The analysis of the statistical data shows an exponential increase in the number of ECE Engineers, i.e., the scope for electronics engineers is going to rise especially in the core industries. The recruiting industries are heavily relying upon the expertise of skilled engineers who can handle different tasks like manufacturing of electronics and communications devices and components.

Job Scope Of Electronics And Communication Engineering

Students from Electronics and Communications background are likely of having a future in the certain industries including Telecommunication, Mobile Communication (2G, 3G. 4G or 5G), Automotive Industry, Consumer electronics manufacture organization, IT industries, Internet and Ethernet technologies, Health care equipment manufacturing, Power Electronics, Steel Industry, Petroleum Industry, Chemical Industry, etc. Opportunities for ECE students are also available in several companies in various fields like designing, installing, manufacturing, operating and subsequent maintenance of the electronics systems and corresponding equipment. Or you can say, it helps students of best engineering colleges in Jaipur to secure a central government job or a state government job, or a job in either of the public & private sectors. Also, ECE offers opportunity in two major categories including Software Industries and Telecom Industries. Now, an electronics and communication engineer can choose to work in avionics and aviation, electricity plant, electricity plant, consumer electronics, communication & telecommunication manufacturing, radio & television, computer application, transportation, diagnostic equipment manufacturing and offshore companies. Also, students from Electronics Engineering can enjoy various avenues including the following:

1. Analog and Radio Frequency Circuits -

Televisions and mobile phones would not have existed without analogue and radio frequency circuits, Wi-Fi, bandwidth would have been terms no one had ever heard. Consumer demands have increased tremendously with time. Hence, new industries are built across the globe to meet the demands. Consequently, there are lots of scope in this field.

2. Computer & Digital Systems -

With the help of computers, each and every industry everywhere is growing via economy and technology at a tremendous pace. Thus, this field will always be in highest demand for recruits.

3. Communication and Signal Processing -

Transmitting, storing and analyzing information signals have always been in great demand for the students of private engineering colleges in Jaipur. No matter whether it is Defence administration of the nation or a radio channel.

4. Image processing and Computer vision -

Nowadays, with the advancement of technology, an individual can access medical devices that uses magnetic-resonance imaging technology to identify diseases and display images at the same time. As technologies are helping furtherment in photogrammetry, surveys and different medical fields are always in need of more ideas.

5. Networking -

3G, 4G and even 5G services can be experienced easily nowadays in all the possible corners of the world. It helps in smooth collaborations and easy communications, both on international and domestic scales. Nobody denies the fact that it offers a huge amount of scope for anyone who wants to work in this field.

6. Remote Sensing -

Radios, smartphones, televisions and all other devices that demand an accurate connection of internet further requires smooth and stable radio waves communication. Hence, remote sensing plays an important role in various technologies like navigation or mapping.

7. Control Systems and Robotics –

Today, large number of industries have adopted robots and automation into various fields, so as to increase the general proficiency of the operations. With the increasing demand, there is a golden opportunity for anyone with interest in Robotics from an ECE background at best BTech colleges Jaipur.

8. Energy Storage Technology -

There has been an exponential global increase in the demand for advanced energy storage systems. They are due to the decrease in non-renewable energy sources and increase in concern for environment-friendly modes of storage. Hence both unit level and grid level energy storage systems are essential by considering the size occupancy or economic sustainability. Thus, there is a huge scope in this field which will not decrease anytime soon.

9. Nanotechnology -

A huge number of industries today are using nanotechnology to make their products like solar cells or microscopic sensors or tracking chips or transistors smaller in size but more proficient. With time, more and more industries will resort to nanotechnology from different fields.

10. Sustainable Energy and Power Systems -

With the world shifting to renewable energy sources, large number of industries are investing a huge amount of financial and manual labor to generate solar energy, wind energy, bio-thermal energy or tidal energy.

[droneseco]

Is the Jackery Explorer 1500 the Best Portable Power Station of 2021?

Jakcery Explorer 1500

9.50 / 10

Read Reviews

Read More Reviews

Read More Reviews

Read More Reviews

Read More Reviews

Read More Reviews

Read More Reviews

Read More Reviews

Read More Reviews

Shop Now

For lovers of portable power, the Explorer 1500 is just about perfect. 

Key Features

Dual MPPT DC inputs (48V)

Maintenance-free design

Onboard Battery Management System

Overcharge Protection/Short Circuit Protection

Multiple charging methods

Smart LCD display with estimated remaining runtime

LED Flashlight

Specifications

Brand: Jackery

Weight: 33lbs (15KG)

Size: 14” x 10.4” x 12.7” (35.6 x 26.5 x 32.3 cm)

Capacity: 1488.2Wh (41.34Ah, 36V)

Maximum Discharge: 1800W continuous / 3600W peak

Maximum Charge: 500W

Solar Controller: Yes

Ports: 7 outputs, 2 inputs

Ports: 3 x AC, 2 x 12V DC, USB-C, 2 x USB-A, 12V Carport

Pros

Solar support is fantastic

Easily powers high wattage devices

All-day capacity

7 outputs

Sturdy build quality

Colorful LCD display

Cons

Heavy

Solar panel option is expensive

No Anderson connections

Buy This Product

Jakcery Explorer 1500 other

Shop

// Bottom var galleryThumbs1 = new Swiper('.gallery-thumbs-1', { spaceBetween: 10, slidesPerView: 10, freeMode: true, watchSlidesVisibility: true, watchSlidesProgress: true, centerInsufficientSlides: true, allowTouchMove: false, preventClicks: false, breakpoints: { 1024: { slidesPerView: 6, } }, }); // Top var galleryTop1 = new Swiper('.gallery-top-1', { spaceBetween: 10, allowTouchMove: false, loop: true, preventClicks: false, breakpoints: { 1024: { allowTouchMove: true, } }, navigation: { nextEl: '.swiper-button-next', prevEl: '.swiper-button-prev', }, thumbs: { swiper: galleryThumbs1 } });

There's just something about going off the grid. Maybe it's drinking that first cup of coffee as you bask in the morning quiet of the woods. Or perhaps it's swapping stories around the orange glow of a smoky campfire. Whatever it is, eschewing the busy world and getting back to nature is something we should all do from time to time. Just ask Thoreau.

But, if old Hank were around today, he'd probably have a cell phone. He'd also probably have a laptop, and he'd need a way to charge that puppy while pontificating out on Walden Pond. In other words, he'd need some portable power.

Well, Jackery has heard this siren song and created the Explorer 1500 portable solar generator. This beastly unit promises 1800 watts of continuous AC power and a generous 1488 watt-hour capacity. But is it any good? That's what we're going to find out in today's Jackery Explorer 1500 review.

Meet the Jackery Explorer 1500

The Jackery Explorer 1500 is a portable "solar generator" used to power your various electronic devices. Think of it as a giant battery bank with enough juice to take out to the campsite or use for emergency electricity, which can be charged from a variety of sources, including solar.

The Explorer features three ways to charge the unit, including a 12-volt auxiliary power adapter, AC power, and optional solar panels (not included). The Explorer houses a lithium-ion battery rated at 41.34 amp hours and 36 volts. It also offers 1488.2 watt-hours of total capacity.

The Explorer 1500 is available for $1599 on Jackery’s website and can be packaged with four SolarSaga 100W solar panels for $2699.

Technical Specifications

Dimensionst: 14 x 10.4 x 12.7 inches (35.6 x 26.5 x 32.3 cm)

Weight: 33.1 lbs (15 Kg)

Battery: Lithium-ion

Capacity: 1488.2Wh (41.34Ah, 36V)

Input: 2 SolarPeak MPPT DC 48V inputs

Outputs: 7 total.

3 Pure Sine Wave AC outputs (110v ~60Hz)

USB-C (60W PD)

Qualcomm Quick Charge USB-A 3.0,

USB-A (5v, 2.4A)

Carport (12V, 10A)

Inverter: 1800W AC (3600W surge peak)

Display: LCD

Certifications: RoHS, UN38.3, FCC, Qualcomm Quick Charge 3.0

Operating Temperature: 14 - 104F (-10C - 40C)

Recharge Temperature: 32 - 104F (0 - 40C)

Warranty: 24 Months (extended to 3 years if registered)

Extras: LED Flashlight

Cost: Battery alone $1599.99 US, and as tested $2699.99

What’s in the Box?

In the box for the Jackery Explorer 1500, you’ll get:

The Explorer 1500

2 Jackery Parallel Solar Power Cable Adapters

12-Volt Power Cable

AC Power Cable with Power Brick

Neoprene Pouch For Power Cable Storage

The Explorer 1500 Instruction Manual and Warranty Information

Who is the Jackery Explorer For?

There are two types of consumers who might be interested in the beefy Explorer 1500. The first is looking for a way to power their devices in case of an emergency. For example, sustained power outages, natural disasters, or the odd one-off zombie apocalypse. For these folks, the Jackery Explorer 1500 offers a few benefits over a gas generator.

The second type of consumer who will appreciate the Jackery Explorer is the outdoor type. Jackery’s motto is “Power Outdoors,” which demonstrates the kind of consumer Jackery is targeting.

Campers who enjoy periodically going off-grid, weekend-warriors, and vehicle-based nomads will all love the freedom that the Explorer 1500 provides. This category also includes people like me, who need to power photography equipment, lighting, computers, tablets, phones, and other mobile content creation gear outside my home studio.

Related: Camping Apps for the Perfect Camping Getaway

Key Features

The most important key feature of the Jackery Explorer 1500 is its high wattage capability. Devices like hairdryers, countertop microwaves, and electric tea kettles use high wattage to operate. Jackery states that this unit should accommodate up to 85% of all electronic devices.

As long as your device doesn’t go above 1800 running watts for a sustained period, then the Explorer 1500 should power it. They can peak at up to 3600 watts, but not for long.

The all-in-one design of the Explorer 1500 is safer than a gas generator and requires very little maintenance. There's also absolutely no risk of carbon monoxide poisoning with this unit.

Plus, the Jackery is much quieter than your standard gas generator and will likely draw less attention from folks who might want to borrow power in an emergency. The device doesn’t need gas to function, and the giant battery will juice up all sorts of household items.

The onboard battery management system keeps the Explorer 1500 from overcharging, and Jackery states that you can leave the device plugged into AC power without any ill effects. The internal lithium-ion battery is rated for 800 cycles. That means you’ll have power when you need it, and you can use the Explorer 1500 for years without killing it.

Recharging the unit is accomplished by plugging it into AC power, using the solar panels, or using the supplied 12-volt car charger. Using these charging methods results in different overall recharge times. The 12-volt car charger is the slowest, taking around 13 hours to recharge the unit thoroughly.

With two SolarSaga 100W panels, a full charge takes around nine hours. With four SolarSaga panels, the total time to fully charge is approximately five hours. Finally, charging the Explorer 1500 with two Jackery AC power adapters takes around two hours to get to 80% power. In this case, you’ll have to purchase another AC power brick, but if you need to fast charge the Explorer 1500, then dual AC is the speediest way to go.

Using the single AC charger supplied with the unit takes around six hours to charge the Explorer 1500 to maximum. This time is relatively fast considering the size of the unit.

Something possible, though not recommended for extended periods, is pass-thru charging. With pass-thru charging, you can charge your devices while you’re charging the Explorer 1500.

Testing the Jackery Explorer 1500

On Jackery’s website, there's a list of appliances that the Explorer 1500 can power and the approximate times the Explorer can run them continuously. Included are a mini cooler for 21 hours, a coffee maker for 68 minutes, a pressure cooker for 75 minutes, an electric grill for 60 minutes, and a microwave for 68 minutes.

To see which household devices the Explorer 1500 would power, I decided to put some of them to the test. I didn’t have a mini-cooler, but I do have a mini chest freezer in my garage, so I hooked the Jackery up to that to see what kind of power it drew. The chest freezer pulled between 300-350 watts when the compressor cycled on, but the wattage output on the Jackery Explorer sank to zero when it stopped.

Some people might ask if the Explorer 1500 will power a camp freezer or mini-fridge. I attempted to answer that question with my tests. Unfortunately, I don't have a camp-sized fridge, but I do have a full-sized home fridge that I plugged into the solar generator.

With the fridge plugged in and running, the Explorer reported around 265 watts being drawn and around 7.1 hours of possible run-time. If you’ve ever experienced a multiple-day power outage, then this device would be great to have around the house as backup power.

As for other appliances, I also tested a 1200W toaster, a 1000W blender, and a 1000W tea kettle. The Jackery Explorer 1500 allowed all of these appliances to function well. Using all three within a short time also only resulted in a 10% reduction in overall charge. This test indicates that the Explorer 1500 is fully capable of powering small kitchen appliances with high wattage requirements.

I also used the Explorer 1500 to power a small 15-amp Ryobi circular saw for a weekend project. Unfortunately, I wasn’t able to get power output readings for the saw, but the Jackery had more than enough chutzpah to help me finish the job.

The ability to provide power to carpentry tools indicates another potential use case for the Explorer 1500—as portable power for a small worksite. Would I use the unit on a big project with heavy power needs? Probably not. But for minor home repair work, this power station is perfect.

Testing the SolarSaga 100W Solar Panels

I also wanted to test the solar charging potential of the Explorer 1500. Setting up the SolarSaga 100W panels involves plugging the panels into the parallel solar power cable adapters and then plugging those adapters into the two MPPT input ports at the top of the device.

These 8mm connectors are standard on many other Jackery units, such as the Explorer 500 and 1000. Unlike those units, however, the 1500 does not include any Anderson connectors. That means if you’re planning on using the Explorer 1500 with solar panels that aren’t the SolarSaga 100W, you’ll likely need an adapter. Fortunately, you can pick up these adapters relatively inexpensively.

The third version of these SolarSaga 100W panels have some exciting features, such as the included built-in stands, ETFE surfaces, and USB-A and USB-C charging ports, which you can use for on-the-go device top-ups.

Using the panels in direct sun, I was able only to achieve around 60W of power input per panel. But it was around 3 pm and somewhat overcast during testing. So, I was expecting input wattage to fall short of the maximum.

Now, if you’re planning on over-paneling this unit, understand that the Explorer 1500 is only rated for 12-51 volts. The top-end of that range is a hard cap, and if you exceed that voltage on either of the input ports, then the unit will stop charging.

What Do We Love About the Jackery Explorer 1500?

The best part of the Jackery Explorer 1500 is the sheer amount of stuff you can power with the unit. The massive 1488Wh capacity of this unit is also something remarkable. While other generators of this type, such as the Bluetti EB150, and EB240 offer similar or higher watt-hour capacity, these devices can’t touch the Explorer 1500’s muscular 1800W inverter performance.

Then there’s solar power. If you can afford it, solar is your ticket to nomadic off-grid bliss. The SolarSaga 100W panels fold up into an ultra-thin package and are only slightly larger than an extra-large pizza box. Packing these panels into your camper or RV will take up only a tiny amount of space.

The panels’ magnetic clasps are also well made, and each time you close the panels, they snap shut with confidence. But, these panels are pricey. On the other hand, if you’re going to invest in a solar generator like the Explorer 1500, add-on solar is undoubtedly worth the bump in cost.

The unit also has the benefit of being equipped to charge seven devices at once. That means no fighting your kids for a spot on the Explorer when they want to charge up their mobile devices. (Your Nintendo Switch is just as important!) And pass-thru charging is a boon, even if you only use it occasionally.

The build quality of the Explorer 1500 is top-notch, and it’s clear that Jackery wasn’t aiming to cut corners. Or, maybe the company was, because there are no sharp corners on this unit. While that might not seem like it matters, try smacking yourself in the back of your leg with 33 lbs. of pointed object, and you’ll understand why this attention to detail is important.

Finally, the unit’s LCD is bright and colorful, and it looks much better than Jackery’s previous Explorer 1000 iteration. The display is easy to read, and even in the dark, you’ll always know how much juice you have or how much power you’re using.

What’s Not to Love?

There are only a few issues with the Explorer 1500 that prevent it from earning a perfect score. The first is the noise of the fan. This fan is noticeably loud. Will that be a problem for some people? Maybe.

For someone like me, who uses the Explorer in a videography setting, as long as my microphones don’t pick up the generator’s noise, then I’ll be happy. And at this point, I haven’t had much trouble. But don’t expect a unit that is whisper-quiet if you’re thinking about buying the Explorer.

Next is the weight. This unit is ultra-portable, but I would not consider it light. It’s 33 lbs of dead weight that will take some muscle to move over long distances. Again, this might not bother you, but if carrying the equivalent of a car battery around with you on your camping trip sounds agonizing, then you might want to search out some smaller power generation options.

There are also no Anderson connectors on the Explorer 1500. For those folks who already have solar panels with Anderson connectors, this might be a bit frustrating. But, you can solve this frustration by purchasing an Anderson adapter for the Jackery. For this, you’ll have to go to the aftermarket, but these adapters are certainly less money than buying all new solar panels.

Finally, the cost of this unit is going to be hard to swallow for some folks. With a complete set of solar panels, the Explorer 1500 will set you back around $2700. That’s a lot of money for someone who is just looking for supplemental weekend power. But, if you’re a serious outdoor person or a digital nomad, then this price may be perfectly justifiable.

Should You Buy the Jackery Explorer 1500?

If the cost of this unit fits your budget, then the Explorer 1500 is a great buy. While I’d recommend it more for its outdoor uses, there is viability to keeping this device charged up in your basement in case of disaster. And, if you’re the type of person who is vehicle-based and in search of portable power, then the Explorer 1500 by Jackery is a no-brainer.

This device is compact, easy to use, and eliminates one of the major problems of “roughing it.” Namely, the lack of portable electricity. The unit is fantastic, and for us, the Explorer 1500 is forging some new and exciting territory in the mobile power market.

Is the Jackery Explorer 1500 the Best Portable Power Station of 2021? published first on http://droneseco.tumblr.com/

[wesleybates]

Types of developers

How many types of developers do you know? And, if you are a developer, to which type do you refer yourself? In the real world, the boundaries between different types of developers are blurred. The more professional you become, the more types you will fit. So let’s see, how many types of developers are available in software development industry.

Before we start, we’d like to say thanks to Lorenzo Pasqualis whose article inspired us to create this material.

To be honest, most of us recognize only three types of software developers: frontend, backend and fullstack. That is obvious, but this is just a half of the truth. Nowadays different developers with the same tech stacks unlikely can apply their skills and knowledge to the different area. It’s like asking your mobile developer to work on creating a game. He could know the tools, but he is not a game developer. And that makes a huge differentiation in developer’s types.

We’ll start with the main types:

Frontend:

Yesterday we wrote the biggest article with cheatsheet for frontenders. So who are they? This is a type of developers who specialize in visual user interfaces, aesthetics, and layouts. Their code runs on a web browser, on the computer of the site user. They work on creating web apps and websites. Hardware is not what frontend specialists usually think about.

Their work requires an understanding of human-machine interaction and design principles more than computer science theory.

Frontend development skills:

design of user interface (UI)

design of user experience (UX)

CSS

JavaScript

HTML

UI frameworks.

Frontend devs need to be familiar with frameworks like Bootstrap, Foundation, Backbone, AngularJS, and EmberJS, which ensure great-looking content no matter the device, and libraries like jQuery and LESS, which package code into a more useful, time-saving form. A lot of front-end developer job listings also call for experience with Ajax, a widely used technique for using Javascript that lets pages dynamically load by downloading server data in the background.

Backend:

The second most popular type of developers. The backend developer specializes in the design, implementation, functional core logic, performance, and scalability of a piece of software or system running on machines that are remote from the end-user. They integrate a vast array of services such as databases, caching, logging, email systems etc.

What makes the front end of a website possible? Where is all that data stored? These are the questions for the backend development. The backend of a website consists of a server, an application, and a database. A backend developer builds and maintains the technology that powers those components which, together, enable the user-facing side of the website to even exist in the first place.

Backend development skills:

Java

C, C++

Ruby

Python

Scala

Go, etc.

They also use tools like MySQL, Oracle, and SQL Server to find, save, or change data and serve it back to the user in front-end code. Job openings for backend developers often also call for experience with PHP frameworks like Zend, Symfony, and CakePHP; experience with version control software like SVN, CVS, or Git; and experience with Linux as a development and deployment system.

Fullstack:

Call this developer a wizard, but he (or she) does both frontend and backend work. The fullstack developer has the skills required to create a fully functional web application. It is considered that working on both the server side and client side professionally opens more opportunities. They’re jacks-of-all-trades.

The complexity of full stack development can be illustrated with this picture (of course, there more technologies):

The fullstack developer should be able:

to set up and configuring Linux servers

to write server-side APIs

to dive into the client-side JavaScript powering an application

to turn a “design eye” to the CSS

Mobile developer:

This is a developer who writes code for applications that run natively on consumer mobile devices such as smartphones and tablets. This type appeared after the boom of mobile devices in the early 2000s and the explosion of the smartphone market. Before then mobile development was considered a subset of embedded development (we will write about embedded developers in this article too).

A mobile developer understands the intricacies of mobile operating systems such as iOS and Android, and the development environment and frameworks used to write software on those operating systems.

Mobile developer skills:

Java

Swift

Objective-C

C, C++ and Java

Application Programming Interfaces (API) like Apple iOS, Android, Windows Mobile, and Symbian

Web development languages like HTML 5 and CSS

Cross-platform mobile suites like Antenna and AMP ( Accounting-Management-Promotion)

Game developer:

Every game-addicted child wants to become a game developer in future. But this occupation as much romantic and fun as complicated and demanding.

Game developer specializes in writing games and can fall into one of the other categories of developers, but they often have specific knowledge and skills in designing and implementing engaging and interactive gaming experiences.

Skills for game developers:

DirectX, OpenGL, Unity 3D, WebGL frameworks

languages such as C, C++, and Java

JavaScript and HTML5

Swift and Java for mobile devices.

Data Scientist:

This type of developer writes software programs to analyze data sets. They are often in charge of statistical analysis, machine learning, data visualization, and predictive modeling. Quite romantic, right? But the list of skills a data scientist should have covers a lot of science-related things:

Statistical programming languages, like R or Python, and a database querying languages like SQL

Understanding the statistics and different techniques that are (or aren’t) a valid approach

Familiarity with machine learning methods

Knowing Multivariable Calculus and Linear Algebra principles

Knowing how to deal with imperfections in data (including missing values, inconsistent string formatting etc.)

Visualizing and communicating data is incredibly important

Having a strong software engineering background

Ability to solve high-level problems

DevOps developer:

This is a type of developer familiar with technologies to build, deploy and integrate the system and administer back-end software and distributed systems.

To explain the way:

A developer (programmer) creates applications

Ops deploys, manages, monitors applications

DevOps creates applications AND deploys/manages/monitors them.

DevOps was made possible because of the cloud and the tools/platforms to make deployment and management easy. Skills needed by devops:

Kubernetes

Docker

Apache Mesos

the HashiCorp stack (Terraform, Vagrant, Packer, Vault, Consul, Nomad)

Jenkins, etc.

Software Development Engineer in Test:

This type of developer is responsible for writing software to validate the quality of software systems. They create automated tests, tools and systems to make sure that products and processes run as expected. Skills needed for engineers in test:

Python

Ruby

Selenium.

Embedded developer:

The embedded developer works with hardware that isn’t commonly classified as computers. For example, microcontrollers, real-time systems, electronic interfaces, set-top boxes, consumer devices, IoT devices, hardware drivers, and serial data transmission fall into this category.

Embedded developers often work with languages such as:

C, C++

Assembly

Java or proprietary technologies, frameworks, and toolkits

With the embedded developer definition, we would like to finish the list of developer’ types. We named for you the main developer types which are fundamentally different. But you could also hear about:

– web developer (the purpose of web development is obvious)

– application developer (who is proficient in creating different types of apps)

– security developer (who creates systems, methods, and procedures to test the security of a software system)

– CRM developer (they hang out with SAP, Salesforce, Sharepoint, and Enterprise Resource Planning)

– Big data developer (rarely met, this type of developers use systems for distributed storage and processing of vast amounts of data such as MapReduce, Hadoop, and Spark)

– Graphics developers (they specialize in writing software for rendering, lighting, shadowing, shading, culling, and management of scenes)

If you want to know more about web development, then get in touch with the experts of Web Developers in Denver, CO

[creative-webdesign]

Mobile App Development Trends 2019

AI / MACHINE LEARNING

AI is the simulation of human intelligence processes by machines, especially computer systems.

WEARABLE APP INTEGRATION

Wearable Technology is typically a category of technology devices that are worn by a user either directly as an accessory or as a part of other materials like clothing.

AUGMENTED REALITY  ( AR )

AR is a type of interactive, reality-based display environment that takes the capabilities of computer generated display, sound, text and effects to enhance the user's real-world experience.

MOBILE WALLETS and PAYMENT GATEWAYS

e-Wallet acts as a virtual wallet, allowing users to make payments and transfer money straight from their phones and a payment gateway is a merchant service provided by an e-commerce application service provider that authorizes credit card or direct  payments processing for e-businesses.

CLOUD INTEGRATION

Cloud-based integration is a form of systems integration business delivered as a cloud computing service that addresses data, process, service-oriented architecture and application integration.

INSTANT APPS

Instant apps are quantified self mobile app for iOS and Android. It tracks the user's phone/app usage, travel, places, fitness and sleep automatically. It puts all this information on a dashboard and gives the user analyzed reports based on the data.

APP SECURITY

App security is the measure and means of defending mobile device apps from digital fraud in the form of malware, hacking, and other criminal manipulation.

ON-DEMAND APPS

On-demand software enables a user/organization to subscribe to software on a pay-as- you-go, monthly billing method.

ACCELERATED MOBILE PAGES ( AMP )

AMP is an open source project created to improve the performance of web pages for mobile devices. The project was spearheaded by Google and Twitter. The technology behind AMP enables lightweight page that load more quickly for smartphone and tablet users.

M-COMMERCE

M-commerce is the delivery of electronic commerce capabilities directly into the consumer’s hand, anywhere, via wireless technology. Commercial transactions conducted electronically by mobile phone.

[inventivaindia]

Ultrahaptics acquires AR/VR pioneer Leap Motion for only $30 million

Ultrahaptics acquires AR/VR pioneer Leap Motion for only $30 million

Leap Motion publicly established itself as a pioneer in VR hand-tracking controls and DIY augmented reality gear, but reportedly didn’t generate much revenue — one reason its valuation sank from $300 to $30 million as it entertained buyout offers from companies including Apple. Today, U.K.-based Ultrahaptics partially confirmed a Wall Street Journal report that it’s acquiring Leap Motion,…

[christophergill8]

7 tax record keeping FAQ

Tax season is over for another year. Now all that's left cleaning up after the filing crunch.

I know many of y'all are tempted to simply toss everything in the trash. Don't.

You don't have to the tax version of television's Hoarders, but there are some tax-related documents you need to hang onto, at least for a while.

These 7 frequently asked questions and answers can help you get a better handle on your tax record keeping.

1. Why should I keep records? Well-organized records make it easier to prepare your tax return. Documentation, both the amount and in good order, also can help you provide answers if the Internal Revenue Service has any questions about your return.

2. What kinds of records should I keep? The quick answer is everything, but again, we're trying not to be too obsessive-compulsive. So let's break it down into key material in specific categories.

It is an income tax, so to verify your earnings you need to keep copies of W-2 forms, all types of 1099 forms (MISC, DIV, INT, G and R), gambling and prize winnings not reported on a 1099, bank statements, brokerage statements and K-1 forms.

If you're getting retirement money, hang onto the official statements detailing retirement distributions. This will help you and the IRS know how much, if any, of a cut due the federal government. In addition, Form 5498, Roth and traditional IRA contributions, and Form 8606, nondeductible IRA contributions, can help you differentiate taxable and nontaxable retirement money.

When it comes to expenses and deductions, hang onto receipts, sales slips, invoices, canceled checks, credit card statements, gambling losses and written statements from charities.

Your home is likely your biggest investment, so keep all your residential records, not just those related to your taxes. These include closing statements, purchase and sales invoices, proof of payment, insurance records, property tax assessments and payments, receipts and documents related to disaster losses and receipts for improvement costs. These could affect not only your annual filings, but also any potential tax bill when you sell.

The same is true for investment documentation. Hold your transaction data, including individual purchase or sale receipts as well as annual statements.

In some cases, photos also are helpful, such as when you claim property losses after going through a disaster.

And, of course, you'll want to keep a copy of each year's tax return that you file. This includes not just the 1040 itself, but also any associated schedules that sent to the IRS that year. You'll be glad you have them at your fingertips when you apply for a loan or other financial assistance, such as college money.

3. How long should I keep records? This is the question that flummoxes pack rats and well-adjusted taxpayers alike. As is the case with most tax questions, the answer is "it depends."

Generally, you must keep your tax records as long as they may be needed to prove the income or deductions you entered on a tax return. But the length of time you should keep certain tax documents is based on the action, expense or event the documents record.

The IRS also has a statute of limitations framework it follows.

For basic annual return filing, the tax man has three years to review your return.

When IRS examiners believe you've shorted your income entry on a return by 25 percent or more, they can come asking questions up to six years later.

The period of limitations goes to seven years if you file a claim for a loss from worthless securities.

When it comes to real property, keep relevant records until the period of limitations expires for the year in which you dispose of the property. These records help figure your basis for computing gain or loss when you sell or otherwise dispose of the property.

Then there's fraud.

When Uncle Sam suspects you've intentionally tried to escape your rightful tax liability, his tax collecting agents get a lot of leeway. A whole lot. Like forever.

There is no statute of limitations for folks who commit tax fraud. IRS agents can investigate you at any time it suspects you entered illegal information on your return. So if you tend to be a bit aggressive with your Form 1040 entries, keep your records for those claims in perpetuity. Just in case.

There's also no limitation on the time the IRS can ask you questions if you don't file a tax return. That's why you should keep documentation of why you didn't file a return in a particular year or two or more.

Don't freak out. It's not as difficult as trying to prove a negative. Say, for example, you spent a year taking care of sick relative and didn't earn any or enough income to require that you file. Proof of how you spent your non-income-producing time will short-circuit a detailed IRS examination of your missing tax year.

And about those copies of the 1040s you filed, hang onto those forever, too. You never know when an old tax return might be necessary or at least handy. They also can be a fun time capsule. When I'm feeling nostalgic, I go back and peruse the first joint tax return the hubby and I ever sent the IRS.

4. How do I fill in tax record gaps?  When you start getting your records in order, either in real paper form or electronically, you might discover you're missing some documentation.

The IRS can help you fill in the gaps. You can order transcripts of your filing history.

You have two options.

Complete Form 4506-T or Form 4506T-EZ to order a tax return transcript. This document shows most line items on your return as it was originally filed, plus information on any accompanying forms and schedules. It will cost you $50 for each tax return transcript you need.

Or request a tax account transcript. This shows your return's basic data, including marital status, type of return filed, adjusted gross income, taxable income, payments and adjustments made on your account. An account transcript is free and it arrives in about 10 days.

You can request either a tax return or tax account transcript online from the IRS.

5. What kind of record keeping system should I use?  Except in a few cases, which generally are related to business operation, the law doesn't require you to use any special kind of record keeping system. You may choose any method as long as it clearly shows your income and expenses.

If you're happy still using paper documentation and have the space, fill up as many filing cabinets with tax records as you need.

Or you can maintain your records on a flash drive or in the cloud. The IRS has been accepting digital records for 22 years. Back in 1997, the IRS referenced optical disks as the storage option, but as Uncle Sam has gotten more tech savvy, it recognizes today's wide variety of options.

All the IRS requires is that your electronic record storage meet the same standards as apply to hard copy books and records. That means when you replace the paper versions, you must maintain the electronic storage systems for as long as they might be needed under the tax statutes of limitation.  

You also want the records' format to be one that makes it easy for you to produce the material if the IRS asks.

And be sure you back up your electronic tax records and keep a separate copy in a safe place in case something happens to the original.

6. What is the burden of proof during an audit? Let's be real here. The main reason you hang onto your tax records is in case you're ever audited.

And here's the really disconcerting part of such an encounter. Unlike the U.S. legal system, where you're presumed innocent until proved guilty, it's the opposite when you're facing the federal tax collector.

During an audit, you are considered tax guilty until proven otherwise.

The burden of proving your tax innocence, or at least showing that the information on your Form 1040 is correct, falls squarely on you.

Good thorough and well-organized tax records can help you do that.

7. When I do discard tax records, what's the best way?   OK, you've sorted through all your documents and have decided which ones you need to keep, at least for now, and which you can toss.

Let me repeat what I said at the start of this post. Don't just toss them into the nearest trash can.

Most tax-related documents are full of personally identifying information. That's exactly what identity thieves want. If someone digs through your garbage and finds your Social Security number or bank account of credit card numbers, they've got what they need to take over your life in the most destructive of ways.

True, literal dumpster diving for financial data isn't that common as it once was. But don't take any chances.

Shredding the documents is still the best route here. It is time-consuming, so consider hanging onto to your tax and personal records until a bulk shredding option arrives. Many office supply stores periodically hold these events, often around the end of tax time, allowing you to bring in your documents to be securely scrapped for free.

If you keep your records digitally, make sure they also are properly destroyed. You can find more on various options for erasing electronic records options in this article from the Records Management Assistance unit of the State and Local Records Management division of the Texas State Library and Archives Commission (there's a mouthful for you!).

The bottom line is that you need to keep some records connected to your taxes. Some you need to keep forever.

Knowing which documents, why they are important and how long you need to keep them can, at the very least, help you establish a manageable record keeping system.

You also might find these items of interest:

Save space and trees: Digitize your tax records

The importance of good, and separate, business records

Reconstructing tax & other records after a natural disaster

Advertisements

  // <![CDATA[ // <![CDATA[ // <![CDATA[ // <![CDATA[ // <![CDATA[ // <![CDATA[ // <![CDATA[ // <![CDATA[ // <![CDATA[ // <![CDATA[ // <![CDATA[ // <![CDATA[ // <![CDATA[ // <![CDATA[ // <![CDATA[ // <![CDATA[ // <![CDATA[ (adsbygoogle = window.adsbygoogle || []).push({}); // ]]> // ]]> // ]]> // ]]> // ]]> // ]]> // ]]> // ]]> // ]]> // ]]> // ]]> // ]]> // ]]> // ]]> // ]]> // ]]> // ]]>  

from Tax News By Christopher https://www.dontmesswithtaxes.com/2019/04/tax-record-keeping-questions-and-answers.html

[industrystudyreport]

Broadband Capacitor Market Size Analysis, Segmentation, Industry Outlook and Forecasts, 2023

Global broadband capacitor market is estimated to grow considerably in the coming years due to high demand for smartphones and increase in applications from automotive and telecom industries. Capacitor is a device that stores electric charge consisting of pairs conductors detached by an insulator. It is specially designed to add capacitance to any circuit. Broadband capacitors are mainly used for connecting RF (radio frequency) signals for avoiding them to ground while blocking during charging. They are used in high speed data or optoelectronics, TOSA/ROSA (Transmit/Receive optical subassemblies), broadband test equipment, millimetre wave oscillators and wave amplifiers, and broad band microwave.

The key drivers of broadband capacitor market comprise increasing need for quality MLCCs in electrical devices, rise in demand for consumer electronics, and growing demand from industries like medical, industrial, military that need high reliability. Moreover, increasing use of IoT in most wearable devices, industrial automation, automated cars, and smart homes is also expected to boost the market. However, growing awareness about defects MLCC material functionalities is hampering the market growth.

Few trends observed in the broadband capacitor market are rise in adoption of digital televisions, technological innovations in ceramic-based capacitors, and growing popularity of Internet of Things. Growing population of emerging economies like China and India is the key reason behind high adoption of digital televisions. Also, in the recent past, Sony, LG, Samsung rolled out significant number of TV models in the market. The market also witnessed technological advancements like additional flexible termination layer. This layer safeguards electrical integrity during the application of external forces. IoT in capacitors enable data transfer over wireless or wired network with no human intervention.

Get Free Sample Copy of This Report @ https://www.millioninsights.com/industry-reports/broadband-capacitor-market/request-sample

Broadband capacitor market is categorized on the basis of type, application, and geography. On the basis of type, market is divided into tantalum capacitor, aluminium capacitor, ceramic capacitor, and paper & plastic AC & DC film capacitor. Ceramic capacitor segment is expected to lead the market in future since they are economic and are highly demanded for use in line voltage segment. These strong performing capacitors also have applications in consumer electronics.

In terms of application, market is divided into consumer electronics, telecom industry, automotive, and computers. Telecom industry is expected to hold significant share of the the market owing to the shift from customary handsets to advanced smartphones. Advanced smartphones need tantalum chip capacitors and multilayer ceramic capacitors to meet the increasing demand.

Geographically, broadband capacitor industry is segmented as North America, Latin America, Europe, Asia Pacific, and Middle East & Africa. Asia Pacific is expected to dominate the market owing to high revenue contribution from the region, increase in population and high demand for smartphones. High revenue contribution can be attributed to large number of established OEMs (original equipment manufacturer) and ODMs (original design manufacturers) of industrial and automotive industry. Further, North America and Europe are also expected to lead the market.

The major players profiled in broadband capacitor market include TDK (EPCOS), American Technical Ceramics Corporation, Murata, Payton, Vishay, Taiyo yuden, Rubycon Corp, Kemet, Panasonic Electronic Components, TOKO, Hitachi AIC, TE Connectivity AMP Connectors, and United Chemi-Con.

Browse Related Category Reports @ https://industriesstudyreport.blogspot.com/

[bestportablewm]

Best Desktop Audio Interface

Are you looking for a top audio interface card? Tired of those plug-and-play solutions that have latency problems? Don’t want to deal with USB and Firewire ports? On a budget? See below for several options when it comes to professional recording desktop interfaces for your podcast, music production, and overall recording needs!

Top Computer Audio Interface Cards For 2019

Name: Rating:Price on Amazon: M-Audio M-Track 2X2M5.0 (Best Overall) Focusrite Scarlett Solo4.8 (Best For Music Production) BEHRINGER Audio Interface4.7 (BEST For Live Music )

M-Audio M-Track 2X2M

M-Audio seems to be constantly looking for what a consumer desires in low-cost consumer audio gear. As time and technology progresses, it seems that home audio interfaces are becoming faster, smaller, and more feature-packed than ever before. At first glance, the Fast Track Ultra seems to fit perfectly into this mold. The unit is an development on the previous Fast Track Pro, and finds a happy middle-ground between being a small and lightweight portable interface, and a studio tool with a wealth of I/O options and high-quality components.

As a longtime owner of the now-aging M-audio OmniStudio interface, I was curious how this new M-audio interface would stack up against what I considered my small home-studio workhorse. So is M-audio able to continue to improve upon their product line, or are their promises becoming too good to be true?

The Unit

The body of the Fast Track Ultra is clearly a tight squeeze for a unit containing four XLR mic pre-amp inputs on the front face. While my M-audio OmniStudio would support rack ears, the Fast Track is only just over a half rack space wide, clearly showing it is intended mainly as a desktop interface. The unit’s body is plastic, as opposed to the OmniStudio unit which is cased in an aluminum shell. Combined with some questionably loose 1/4” inputs, I am reluctant to say whether the unit would be able to endure heavy use as a portable audio interface. Nevertheless, it is a very attractive unit with easily accessible connections and knobs, giving it a very use-friendly image from the start.

The I/O

Many low-cost and portable audio interfaces seem to fit into two categories: The small 2-channel interface for simple projects or stereo remote recordings (Presonus Firebox, M-Audio Fast Track Pro), or the expanded units, often with eight built-in pres (Presonus Firestudio, Alesis MultiMix). With four built-in mic pre-amps, the Fast Track Ultra fits nicely in the middle.

The M-Audio Fast Track Ultra provides a complete recording solution, with six channels of analog inputs and outputs plus 2-channel digital S/PDIF I/O. Unlike most USB audio interfaces, it features two dedicated inserts on the first two channels, giving you the ability to insert outboard processing before A/D conversion. Easy connection via a single USB 2.0 cable delivers both audio and MIDI communication with your computer.

Getting Connected

The card is the first interface released by M-audio to have USB 2.0 connectivity, a change that seems a bit late. After booting up your computer, you may be surprised to find out that the Fast Track Ultra will power up as well, even without a power adapter. The unit can run with a minimal 2-in 2-out connectivity while being powered through the USB bus alone. A 5V power adapter, which looks oddly like a cell phone power supply, allows for full usage of the I/O options.

I noticed a weird problem after tracking some MIDI keyboards using the unit’s USB bus power. In order to hear playback, I put on my headphones and immediately noticed a hum. After unplugging the MIDI cable, the hum vanished. I decided to leave the MIDI cable inserted and plug in the power adapter. After restarting the unit, the hum again was gone.

The included drivers and software couldn’t have been easier to install on my Mac. The unit supports ASIO and WDM on PC, and core audio on Mac. The installation includes a Control Panel that exists both in the Applications folder and in System Preferences, bringing up the software mixer and monitor controls. Within less than ten minutes, you should be setup and ready to go.

The Control Panel

The m-audio allows monitoring all eight direct inputs (six analog channels and two of S/PDIF digital) as well as software returns, all of which can be separately adjusted in the Control Panel. The monitor windows are clean and simple, and allow fast and easy adjustments with flexible routing. The window looks like a basic mixer and includes a fader, pan, solo, mute, stereo channel link, and an effect send, as well as master out faders with effects return.

Adding up to monitor control, there is a tab for settings, meters, and a status screen labeled “about”. There is also a unusual tab named “flow” that initially seems to be a visual means of re-routing I/O. The screen is, in fact, a diagram for reference, perhaps to give a better on-screen understanding of the unit’s signal flow.

The settings tab has a sample rate selector, a toggle between internal and external clock sync, and settings for the hardware DSP processors, but before you get too excited, this is not intended to be a software plug-ins solution, but pretty a tool for routing monitor reverb or delay to a player without exhausting the cpu. This is a smart and useful, yet partial concept. Each channel is given an individual effect blend via the control panel, but the effects are restricted to several reverb, delay, and echo settings, all of which do not sound particularly great. Even so, this feature is not found on most units in this price range, and is a nice tool to have handy, regardless of its limitations.

The Sound

After completing a project, I am very pleased with the functionality of the unit. I connected it to an iMac with an external firewire hard drive, and we recorded up to six channels flawlessly, with very minimal latency and no clicks or other digital errors.

My only complaint is that the headphone outputs did not have enough gain to my liking, especially for drum tracking. A solution to this could be a better isolating pair of headphones.

Although the build quality of this audio interface seems decent enough, it is still a downgrade from my older OmniStudio, which has a heavier chassis and tighter knobs. Even so, I think the fast track would resist the test of time as long as it’s treated with care.

Whether you’re a musician, producer or DJ, the powerful combination of Apple and M-Audio  gives you everything you need to put together a high-powered personal studio.

Best Audio Interface for Electronic Music Production

Focusrite Scarlett Solo

I use the Focusrite Scarlett Solo for recording podcasts, acoustic songs, and even vocals for some of my club mixes. Even with that wide variety of uses, I have to say that this audio interface gets the job done. My system is an everyday HP desktop that I purchased online that’s a little bit on the more advanced end of the spectrum. For software, I use Adobe Audition as I’ve been using its previous version, Cool Edit Pro, since high school. The Delta 44 and Adobe Audition have been a winning combination for me on my desktop.

The problem I had in the past with recording solutions was the constant snap, crackle, and pop of the audio. Reviewers complained about this issue with the Focusrite Scarlett Solo as well, but the informed reviewers stated that with the proper tuning and by actually reading the instruction manuals, you can have a professional recording setup on your desktop without breaking the bank. Initially, I was skeptical due to the negativity, yet I decided to take the plunge and try things out myself. The worst that could happen is a refund or putting it for sale somewhere online for a little bit of a loss. To me, that’s no big deal so I went along with it.

When the audio card arrived in the mail, I knew I had to do as the positive reviews suggested. I read the instructional manual, took into consideration some tips of reviewers, and even checked some other information online. When I felt I was ready to get the show on the road, I popped open my desktop tower and inserted the card into one of the PCI slots on my motherboard. Yes, even as a top audio interface today, this audio card still relies on a PCI connection rather than a PCI Express connection, which is more common nowadays.

Even with the slightly dated technology, this audio card runs like a charm. My first test was to record one segment of my upcoming podcast for my buddy’s exercise and health website. I made sure my buffer settings were just right – not too high and not too low as suggested by a reviewer of the the Delta 44 online. My voice has never sounded so clear, and this was without any filters. So once I applied my usual filters and effects with some tiny tweaks to mesh better with the new audio card, I sounded like a professional radio personality. Considering how much I spent on this audio card compared to my previous audio interface, it was basically a steal. I guess that’s what happens when you switch from a USB solution to an audio card interface.

So if you have the capacity for a top audio interface in your recording rig, you need to get this Focusrite Scarlett Solo . A few years ago, I purchased a Lexicon Lambda USB interface for my Dell laptop at the time. For what I wanted to do, it got the job done, but took way too much time to configure to get subpar results. There was constant sound popping and recordings cutting out no matter what I did. Even after going through page upon page of support topics, I didn’t get the end results I needed. With the Delta 44 though, everything’s working with much better ease. My acoustic songs sound pretty close to professional quality even though I’m recording things from my bedroom and my recent dance songs have more punch to them.

On the side, I moonlight as a DJ at the local clubs in my area. Aside from spinning remixes of the latest hits on the radio, I like creating my own songs and mashups with my own vocals. A lot of people have been digging my originals, so I had to step things up with better sound quality. The solo delivers.

If you’re in the market for a top audio interface that delivers professional results while on a budget, then the Focusrite Scarlett Solo  is what you need in your recording rig. As long as you read the instruction manual and understand the basics of setting up this audio card with the rest of your recording equipment, you’ll be able to create sound recordings pleasant to the ears.

Best Audio Interface for Live Performance

BEHRINGER Audio Interface

Having experience with M Audio in the past, I knew I needed a more robust BEHRINGER Audio Interface controller compared to what I had before. I was making progress with my electronic music, so an upgrade was needed. My recording adventures began in high school when I would simply record acoustic tracks and vocals with my Dell desktop’s cheap computer microphone. With a couple of tweaks within Cool Edit Pro (now Adobe Premiere), I was able to get some decent sounding recordings.

When I got to college, that’s when I got heavy into acoustic recordings and gigs with my roommate at the time. However, I gradually saw myself transitioning into electronic dance and pop music. To me, there’s nothing like really getting into a beat and wanting to bust a move in a fun environment. So on my computer, I’d mess around with Fruity Loops, Reason, and Garageband once I got a Macbook Pro. For a while, I used an M Audio Radium 61 as my MIDI controller in Reason and Garageband. I really enjoyed its solid construction and its overall functionality. However, I needed an input device with a full keyboard. That’s when I knew I had to drop more than $100 or $200 on a MIDI controller to get what I wanted.

After some digging through M Audio reviews, as I knew I would be sticking with this solid brand, I found the BEHRINGER. Like my previous controller, it’s USB-powered, so I don’t have to worry about lugging around a clunky AC adapter or dealing with a bunch of wires. The wires involved with my Macbook Pro and other equipment are enough for me. However, some people might prefer using the optional AC adapter to relieve some stress off their computer’s calculations and whatnot.

The Oxygen 88 also comes with 4 velocity curves and 3 pedals – 2 sustain pedal inputs and 1 expression pedal.

What I absolutely love about the Oxygen 88 are the hammer-action keys. Rather than pressing onto something that feels cheap and overly plastic, it really feels like I’m pressing the keys to a legitimate upright piano. For how much I paid, that’s a pretty solid deal.

Of course, if I wanted to simply play piano, I could’ve gone with something more cost effective, but of course I bought this BEHRINGER Audio Interface controller to make awesome beats. For a few weeks, I messed around with Garageband and Reason utilizing the built-in functions of this MIDI device. Gradually, I got back to that level of comfort I had with the Radium 61, and I actually enjoy using this more due to those hammer-action keys. At first, I was reluctant to upgrade my MIDI controller because its keys just felt so right to me. Now I don’t see myself using a cheaper device again. Actually being able to feel the weight of the keys helps when I’m trying to add a certain effect or certain level of expression in my songs. This is something that is hard to create in mixing software without having to manipulate the settings and filters.

Now that I was feeling more comfortable with my new MIDI setup, I decided to test things out at a mug night for the upperclassmen at school. They apparently needed someone to replace this local band that was supposed to play for their event. One of my buddies was running this mug night and knew I liked DJing and throwing in a few of my own custom mixes, so he asked if I wanted to fill in that empty spot.

The night went on without any problems. Sure, it’s a different ballgame going from using this BEHRINGER Audio Interface controller to program notes to playing bits and pieces live, but I felt I knew what I was doing. Well I hope so. Most people wouldn’t have noticed anyway given the type of event I was playing for. Regardless, I was really feeling my songs – beat by beat, track by track. Having those extra keys on the Oxygen 88 really helped me out with my live playing. It was so much easier being able to assign instruments all across the board, especially since I was experimenting with more layers in my songs.

Everyone at that mug night event seemed happy and I was happy with how the Oxygen 88 helped me win the crowd over. I doubt I would’ve been able to pull this off if I was using a shorter keyboard. Don’t get me wrong. I’m not saying the Radium 61 is a bad MIDI controller, as it was my pride and joy for years. It’s just that with the layering and complexity of my songs now compared to in the past, the Oxygen 88 is the right BEHRINGER Audio Interface controller for my needs.

  The post Best Desktop Audio Interface appeared first on Best Portable Reviews.

from Best Portable Reviews https://bestportablereview.com/best-desktop-audio-interface/

[itspranavireddy]

An Introduction to Entertainment, Media & Journalism

Industry Overview An internship in the media, entertainment and journalism industry means you can get involved with news and politics, sports, arts and culture, science or business. The work will cover global, national or local events, entertainment and human interest stories.

Junior roles in these industries typically rely on shadow, assistance and reporting to top executives such as editors, directors and producers.

Roles in media, entertainment and journalism are becoming multi-platform, making IT, the web and broadcasting skills valuable. Knowledge of various media platforms, traditional and modern, is highly sought after.

As the rise of technology makes the world more accessible to media, entertainment and journalism, industries are becoming a global force. These sectors have the power to connect and unite people on opposite sides of the globe.

Types of Company: What Do They Do? Who do they do it for? And why they do it

There are various fields of media, entertainment and journalism, including photography, print, television, mobile, digital, video games, internet, radio and music.

There are different types of companies in each field:

Public Service: — Public broadcasting includes radio, television and other electronic media outlets, whose primary purpose is public service. In most parts of the world, funding comes from the government, especially through the annual fee charged on receivers.

Independents: — Independent media refers to any kind of media, such as radio, television, newspapers or the Internet, without the influence of government or corporate interests. తం Independence ’is often used synonymously with alternative media to refer to media that identify themselves with the mainstream media.

Compounds: — A conglomerate is a combination of two or more companies engaged in completely different businesses that fall under one corporate group, usually the parent company and several subsidiaries. Often, a conglomerate is a multi-industry company. Conglomerates are often large and transnational. 21st Century Fox is an example of a conglomerate.

Multinational corporations: — A multinational corporation (MNC) is a company that has its facilities and other assets in at least one country, not its home country. Such companies have offices and / or factories in different countries and usually have a centralized headquarters, where they coordinate global management.

The job market Market outlook: Who is hiring?

The current business models continue to evolve as the media, entertainment and journalism industries begin to evolve into new models. The traditional model still dominates, but the movement to the online “over the top” (OTT) model is accelerating.

Acceleration is driven by the rise of devices such as tablets and smartphones that offer fast-growing content and high-quality viewing experiences online. This increase reflects the public’s appetite for content, especially video, anywhere, anytime and on any device. The consumer world, especially the younger generation, can quickly find their way into the viewers’ market using multiple devices inside and outside the home to consume content, sitting in their rooms to watch television shows at programmed times, and at a time and order of their choosing.

Changing dynamic presents challenges, but it also offers lucrative opportunities in these new types of media. However, the admiration and desire for quality media, such as film, photography and journalism, is still alive and well.

Roles, career paths, earnings and work-life balance: What can I do?

There are whole host areas of media that are interested in pursuing graduate. Many of these areas require transferable skills that can be easily applied to more than one aspect of the wider industry.

Here are just a few examples:

Animator: Animation is the art of making images that come to life on screen. It features all kinds of media, from feature films to commercials, pop videos, computer games and websites.

Audio Visual Technician: The Audio Visual Technician handles equipment to create sound and visual images.

News Editor: News Editor means not only editing recordings for newscasts, but also monitoring and recording network feeds, maintaining archives, and coordinating feeds from bureaus and live trucks. This person needs a good grasp on editing techniques and is able to edit video on tape-to-tape systems or non-linear setups.

Post Producer: The Post Producer is an integral person to Film and TV who does original editing, dubbing and other post production tasks when shooting and tapping is complete.

Producer: A producer directs the situation for a television or radio show, documentary, music video or movie production. A producer initiates, coordinates, oversees and controls all aspects of a product, from fundraising and hiring of key personnel, to supplier arrangements. The producer sees the project from start to finish, from development to completion.

Researcher: Researchers develop or develop ideas, increase their knowledge and understanding of industry needs, and present their findings to decision makers. They are fact checkers and ‘brief’ authors for various stages of production.

Journalist: A person who writes for newspapers or magazines or prepares news for broadcast on radio or television.

Individual tasks depend on your role in the media, entertainment, and journalism, but may include:

1 Setting up and hosting client meetings Networking and building contacts Finding and researching stories and ideas through company contacts, press releases and other media People attend PR nights, previews, premieres, sporting events, photoshoots and press conferences. Working with other departments such as news teams, photographers, editors, production, casting, and research. Note taking and data collection Action on feedback to produce final products Creating and uploading content for your publishing website Increasing work area — direct online reporting or real-time blogging while covering important events Earnings

Salaries range from $ 35 to $ 100K + depending on location, experience and specific company. US National Average Industry Salary k 36K

Work / life balance

Work / life balance: 3/5

Difficult to generalize, work / life balance depends on various factors. In a media career, it depends on client demands, but you can expect more flexibility throughout entertainment and journalism.

Educational, hard and soft skills: What do I want?

In a competitive field, such as the media, entertainment and journalism field, strong resume startups differentiate candidates. Relevant work experience and extracurricular activities are highly recommended.

You need to display:

Strong written and oral communication skills Story-telling abilities Interest in news, current affairs, business, popular culture and people Good organizational skills and ability to work under strict deadlines Ability to quickly understand complex problems Resilience, determination, flexibility, persistence, motivation and integrity Expert technical skills in the field of your choice is a huge bonus How To Know Social Media And Blogging To Succeed In These Modern Industries A portfolio of work with examples of your creative skills is a great way to improve your profile

Industry Knowledge: Things you need to know Terminology: What Terms, Phrases, and Concepts Should I Know?

Censorship — A method of suppressing text or text that is considered offensive by some standards.

Annotation — A description of the value, meaning or ideology associated with media text is added to the text by the audience.

Structure or structure — The process by which a media text is shaped, subjected to a variety of decisions, and designed to keep the audience interested in the text.

Customers — for whom commercial media text is built and who responds to text with commercial activity.

Convergence — Merger, publishing, computers, film, music, and broadcasting technologies that were formerly different communication industries made possible.

Critical Autonomy — The process by which an audience member can read media text in a way other than preferred reading. It is also used to illustrate the ability of media literacy students to reproduce texts outside the classroom.

Demographics — Measurable characteristics of media users such as age, gender, ethnicity, education and income level.

DENOTATION — The interpretation of the media text indicates its common sense and clear meaning.

Flock — an organized effort to influence media content, which takes the form of letters, phone calls, petitions, lawsuits and laws.

Style — A category of media texts classified by a specific style, form or content.

Dominance — The dominant ideology persuades dominant groups to subordinate groups for their own purposes. The task of the media in the process is to promote genuine management.

Intertextuality — A media text that refers to another text that is, on the surface, unique and distinct.

Medium — A singular form of media, the term usually describes personal forms such as radio, television, film.

Narrative — How the storyline or story is told. In media text, narrative is a coherent sequence of events in time and space.

Product Values ​​- Describes the quality of a media product in proportion to the money and technology spent on the text.

Publicity — Its primary purpose is to publicly convince the audience of the validity of a particular viewpoint.

Psychographics — A more sophisticated form of demographics that includes information about the psychological and social characteristics of media users, such as attitudes, values, emotional responses, and ideological beliefs.

Representation — The process by which a built-in media text refers to people, places, events or ideas that represent, represent, or refer to the existence of reality and outside the text.

Synergy — a combination of two different media texts or products that share similar features, thereby helping to market the other.

Transparency — The quality of media text looks natural without it being built.

Vertical integration — the process by which a media company earns another place in the production process.

FuGenx is a top notch mobile app development company based out in USA. Provide Wide variety of services like Android. Ios app development services, Game app development services and more.

If you are looking out to develop an app or have an idea drop your details visit Fugenx.com

Looking for app development services Click here to develop a mobile appand get a free consultation.

[rowanbusiness-blog]

Why To Work on Online Business

The Evolution of Internet Search Engine Marketing

Nobody likes a man or woman who comes as a fresh guest to some forum also commences

spamming inbound links. All over again, you have to consider doing the maximum level of work

for the very first return. Add value. Speak to Other People. Earn suggestions.

Remedy inquiries. Just don't spam hyperlinks. Add your link into a signature after

some posts or following the rules of this forum enable you to accomplish this, but do not try

to direct folks to your internet site at every bend and then turn. It won't work out well

for you in the event that you do so.

Certainly, optimization of one's internet site for important key words is a important

facet of marketing and advertising your enterprise online. Nevertheless, usually the one factor to stay in

intellect is that in the event your small business is fresh -- significantly less than two years old -- and also you also've

assembled hardly any ability or content, then you are definitely going to have a tough time

ranking on very top of Google's SERPs for virtually any key word which is marginally

competitive.

There really are a lot of most high-domain authority sites you could find pics and

movies onto create a subsequent. Pintrest, Flickr, Tumblr and Instagram come to

brain first. Use relevant hash tags and descriptions to properly categorize exactly what

you are post on, and follow others on your industry or niche communicating together with

these hash tags.

To reach all those people, we desire amplifiers, energy consumers and influencers to help

spread our communications. While this wont be free, it is going to give you instantaneous access

to a wide audience inside your precise niche provided that you choose the best

Insta-gram influencer that will help disperse your message.

On the other end of the spectrum, a lot folks are online-searching sleuths.

We're professionals, able to anonymously browse the entire world's annals of information

easily with ease. We can tap into this huge knowledge available at a

minute's notice from highly effective, blazing-fast pocket computers, on cue and in

almost any moment; point. Yes we most certainly understand how to run a research.

You should consist of social networking links in your email signature far too, along side

any relevant links to major company advertising pieces -- electronic brochures

or news pieces which feature your business. Dip a small tag-line or one-sentence

catch phrase about your business and its assignment too.

LInkedIn classes are likewise a great method of calling people that you could maybe not

have mutual connections with. You can message every other member at the group

with no joined, which can turn into a huge asset depending upon your

special conditions. Share upgrades often in the category, and be certain to

remain in the highlight without any over-sharing.

Facebook advertising, whilst maybe not free, offer an outstanding opportunity for reaching the right

demographics for your industry. As long as you know-your-customer effectively, you

may use metrics like interests, geographic location, marital status, era and

more, to locate prospective customers to send strategically-targeted

landing pages, and additionally known as press webpages.

## 2-1\. Post photos and videos together with applicable hashtags on P-interest, Flickr,

Tumblr and Insta-gram.

The problem? We are the product of an instant-gratification culture. We need

points, and also we would like them now. This really is produced out of the genetic makeup,

but further fostered by societal and social norms that highlight the hedonistic

delights associated with enjoying life's many primal urges to consume, earn and

procreate.

Exactly what does it take to advertise your business enterprise on the web? Without a long time and

years to proceed the positions on Google's SERPs, the way can an entrepreneur get

the proverbial phrase out? There are definitely some ways to advertise your

company that will offer a better return on the expense of your own time compared to

others. A few will need months to pan out; while others are going to need months and

a long time.

Trustpilot and Yelp are specifically dedicated to aiding consumers get the

perfect organization to operate with, also additionally increases transparency by offering past

customers' experiences with the corporation. All these websites will be the most significant from the

world for internet evaluations and may be leveraged to help build trust with

potential consumers.

Find some thing you may provide a way and cosponsor a award or contest with

another business, group or professional in your field. Use tools such as LinkedIn

and face book to community with others, and locate another likeminded corporation or

practitioner willing to run a award or give-away with you. The whole purpose

here will be always to incorporate value in the public eye catching.

That isn't an on-line marketing and advertising technique which can get you instant earnings or

even instant site visitors. It's going take time. But as long as you're adding value and

you're enthusiastic about what you do, you'll create that after up more than

the forthcoming months and years. Don't forget to remark, like and interact together along with additional

individuals's articles just as far as possible in order to get out yourself there in the

commencing.

Today, with all the ever-pervading strength of societal media, you may immediately reach

droves of men and women from across the globe in a moment's note. But we also know

that calculations and prominence are working contrary to us, notably when we

do not have the reach of tens of thousands or even thousands of followers.

Press-releases aren't planning to secure you instantaneous media policy. While some

media professionals will utilize outlets such as Help a Reporter, or perhaps scour

press release websites like PR Internet, you are probably not going to get any type of

minute news coverage by simply putting out a press release.

If you are interested in getting some traffic that is early, and now you have a fairly fresh domain

-- less than 2 yrs old with minimal authority built up -- you really should work with

promoting your content on websites such as Medium and Quora. How can this function? Produce

1 high-quality item of content on your own website. Make sure it really is keyword-

centric, insightful, exceptional and adds lots of value. Ensure that all

you are talking about will help individuals in some way, form or shape.

## 1-5\. Optimize your website to get SEO.

Our nascent fascination with search stems right back to the net's earliest days

when algorithms didn't reign supreme. Back then it had been far simpler to function as

entirely on the internet. It didn't require all of the specialized knowhow, breadth and

comprehension of countless of ranking aspects to be able to be discovered relevantly

within an online research.

But a media release that's well-written and also has a healthful hyperlink account

can aid you slightly with search engine optimisation, but it could also let you communicate

essential companion events or news you could then use to actively pursue

networking outlets with through the suitable PR stations.

Experiment with micro-spends to determine which ad copy and squeeze web page receives

the best responses for dropping consumers into your product sales funnel. It may

require a rather large period of time and energy to get the most suitable mix or recipe when it

arrives to advertisements on a platform such as Facebook, but once your effort is

lucrative, all you want todo is continue to scale.

## how can you market your business online?

## 14\. Utilize business listing sites like Yahoo Local and Google Local.

If you're seeking to obtain a bit of traction with your content, you also can use

prosperous snippets, Accelerated cell Pages (AMP) or Facebook Instant content

(FBIA) to help with a few early vulnerability. Wealthy snippets employ into a number of

content material forms including articles via the AMP saver, neighborhood organizations,

audio, recipes, evaluations, TV, videos and movies.

Utilize face-book advertising and strategically-targeted landing pages.

In case you're an authority within your area, why not offer a conversation in a expert

seminar or webinar? Clearly, TED Talks would be the first suggestion for

pro conventions, however you could speak at a number of different kinds of

conventions or webinars conducted on line.

A large way to get this come about is always to offer your professional services to get being a guest blogger.

Obviously, you should need a superior background written down yourself, plus it

might be difficult to locate a popular blog eager to make it possible for you to try it, however

it'd be well worth an attempt in case you eventually secure a guest article.

October 26, 2016 18 min read

**Linked:10 on the Web Entrepreneurs to Follow For Inspiration and Expansion**

You'll find Wordpress plugins you are able to use for abundant snippets by means of Schema.org's

specifications, along side plugins for the two AMP and FBIA. Considering the

recent concentrate on mobile by Google and face-book, as an instance, having AMP along with

FBIA posts will give you some little benefit over those who don't, escalating

your visibility on SERPs and in newsfeeds.

Reaching to common bloggers in your niche might be an efficient method to

advertise your organization online, particularly if you have something of value in order to incorporate

to a number of the posts. In the event you turn up a popular blogger who often writes about a

particular theme that directly contrasts into your line of job, why do not

reach out and search for ways to collaborate?

YouTube is just a huge resource for tutorials as you are able to teach men and women simply

about anything in an easy-to-understand format. Whether you're screen-sharing

to teach an electronic digital skill, or you are recording something in the actual Earth,

just be sure the caliber of the recording and also the overall content is high quality.

Additionally, be sure to drop a connection in the outline back to relevant content

on your site.

The aim is always to develop excellent articles, but also ensure that you Boost your

site's On-Page and OffPage search engine optimisation. Although this could develop into a very lengthy

discussion, pay attention to things like your internet site's speed, mobile usability,

meta-descriptions, connect profile, studying level, mentioning of resources, articles

caliber, insightfulness therefore forth. This is significantly more likened to your marathon compared to the usual

sprint, and thus aren't getting frustrated in the quick term in case that you do not see monumental

outcomes.

E mail marketing is something which each business operator ought to be participated in,

but it really is no effortless feat. To succeed with email advertising, you have to give

away something free of charge in exchange for the buyer's email address. It requires

to become some thing of value. If you are seriously interested in collecting emails, then have the

moment for you to develop a absolutely free ebook or report which helps people within your business

or area of interest. Then, create a relationship with this particular consumer by means of drip-fed

campaigns using a system like Aweber, Access Response, Constant Contact or

Mailchimp. But don't try to promote at each and every corner and then also turn. Join,

afterward focus on selling.

Among those hurdles holding back small business people and professionals alike is

that of trust. People are reluctant to trust companies they don't possess

direct knowledge of know someone who's worked with them. Certainly, websites

enjoy Yelp will benefit that, but so may a site like Trust Pilot.

If you may identify which clients are building the absolute most income for your

organization, you can scale out your sales by sending them more offers and

special discounts for other products. You could even gear your online

marketing specifically to these customers if they are using a portal system to log-in

or if they're being monitored by cookies.

## 18\. Use pressreleases to communicate relevant company news or events.

**Relevant:Why You Are Not (Yet) a Good Presenter (and 5) Items You May

Do About It)**

The 80-20 rule, or the Pareto Principle, says that 80 percent of those results

come from 20 percentage of those initiatives. Ostensibly, it is only a small part of

that which we do that actually produces consequences. But this applies to

which claims that 80 percent of your revenue comes in 20 percentage of

your customers.

Clearly, the most important method you may advertise your business enterprise online would be always to

assemble a site where it is possible to share and post high quality content that provides an

exceeding top amount of value on a normal foundation. This is undoubtedly a very

long-term strategy, also it wont cover off instantly, however each and every entrepreneur

needs to understand the importance of embracing this internet advertising process.

Whatever you provide, be sure to secure the customer's contact details you

can get in touch with them afterwards. If you should be giving a service for free,

you now have the opportunity right then to up-sell those customers to some compensated

services. People are somewhat more inclined to really feel as though they owe you when they acknowledge

some thing free of charge as well.

Join the others around LinkedIn classes.

## 6.

Make useful video tutorials on YouTube.

Sites like Angie's listing and TripAdvisor offer you a path for practically any

firm to reach a tremendous audience of expected consumers. These websites are

a huge source for acquiring any local business, giving you the opportunity to

have buyers go away reviews predicated in their adventures along with your organization.

## 5\.

Affect the power of Insta-gram influencers.

Certainly one of the easiest ways that you can promote your small business on the internet is by utilizing

an branded email signature. Place your links and some other possible accolades that your

company may have received straight into your email signature. This helps you to

properly promote your company to those who you are in connection together to the

everyday basis.

## 19\. Create a branded e mail signature.

Research has demonstrated that folks are more likely to accept some thing for

free than they have been to pay a minimal price to get it. Thus, why not offer a totally free

product or service to your web visitors? Possibly you provide a totally free 15-minute

consultation or an entry-level product you want to give away.

## 20\. Implement the 80-20 principle to spot and promote to high-value customers.

Develop a partnership with your clients through electronic mail advertising.

When it has to do with internet promotion, webinars are one of the most potent instruments

for selling not exactly whatever to a highly-engaged crowd. And the more expensive that

audience, a lot more inclined you're going to be in a position to market your services or products.

Long term, this would most certainly give you exposure and allow one to develop

more power over time, and it has a superb portfolio piece or restart item

which can serve too, particularly in event of expert speaking

engagements.

If you are running a local company and attempting to attract nearby customers to

a popular locale or offering a expert service that's

geographically-specific, you need to list your organization on neighborhood small business

list websites like Yahoo Local and Google Local.

## 12\. Regularly lead to forums that are inbound.

## 17\. Provide a conversation at a expert conference or on a webinar.

## 1-3\. Offer a absolutely free product or service to clients.

## 10\. Make Use of snippets, AMP and FBIA.

## 9\. Consumer trust on programs like Trust and Yelp Pilot.

But today, with all the evolution of Google's heart search algorithms, also in

the aftermath of key adjustments which have now gone by titles like Panda, Penguin and

Humming Bird, being found on the web https://pari.info/internet-marketing has become conducive to obtaining a doctoral

degree in physics or math.

## 1. Make a website and place high-quality articles routinely.

Use TripAdvisor or Angie's Listing.

Nevertheless, in order to be successful in business or in existence, you need todo the maximum

amount of job to your smallest amount of initial yield, but not another way round. You

must suffer the pain should you would like to experience the fun. And when it's

comes down to advertising and marketing your small business, you'll probably encounter

tremendous amounts of annoyance in case you don't know exactly what you're doing.

Translation?

Anybody who's considering controlling hunt has to know that it

takes many, many years to build up the form of link, authority and

articles to position nearly effortlessly for specific search phrases. The accuracy of the

thing? You want to complete the maximum quantity of work for the very first yield if

you are seriously interested in gaining any traction with all-natural marketing online.

YouTube provides a excellent reference for promoting your company around the net. Though

you may get some friction at the outset for developing your own audience, in the event that you

give attention to creating video tutorials that are useful, finally, you will reach a huge

amount of individuals. All over again, you've got to focus on incorporating price without much

issue for generating profit.

Linked-in groups are a fantastic method for quickly linking together from your

business or niche that will help disperse your information. You may promote your content

via linked-in groups as long as you don't come around as spammy. It's best

in order to add value to some conversation or discussion before trying to shed your links.

As business owners, we all know that the very ideal solution to successfully promote any firm online

is to be seen by means of an internet search at the top of Google's lookup

engine results pages (SERPs). It's totally free and offers near-limitless targeted visitors to

people who are able to master that this highly-convoluted field of online search. However, DO-ing

that's also become a massive undertaking.

Not only does

[bixeapage]

Mytek Liberty DAC And Headphone Amplifier Review

The Mytek Liberty DAC and Headphone Amplifier surprises by providing distinctly smooth sound while remaining clean and dynamic. This is an excellent-sounding component, and both the DAC (used as a preamplifier) and headphone amp are exceptionally well-voiced.

Highlights

Mytek Liberty DAC and Headphone Amplifier

Handles PCM, MQA, and DSD files from its USB2 input

Sounds significantly less strident than the majority of Sabre-chip DACs

Balanced and unbalanced volume-controlled analog output jacks for preamplifier feed

127dB of dynamic range

Up to 384K, 32-bit PCM capability

DSD inputs at DSD – 64 / 128 / 256

Built-in 3-Watt headphone amp

Introduction

The Liberty DAC and Headphone Amplifier is the latest product from Mytek Digital Corporation. Mr. Michal (pronounced “Mehow”) Jurewicz is the company’s guiding light, and designer of the Mytek Liberty DAC. Jurewicz is married to Icelandic artist Hrafnhildur Arnardottir, and they currently live in Brooklyn with their two teenage children.

As to Michal’s background, after earning an Electrical Engineering degree in Warsaw, Poland, he moved to New York City. Jurewicz was the recording engineer at two of the top recording studios there. When he saw the coming digital revolution, he started Mytek Digital in 1991. Originally building analog-to-digital converters for recording studios, Mytek launched its Consumer Division in 2011. Many famous recording artists use Mytek gear, including Stevie Wonder.

Mytek Liberty DAC and Headphone Amplifier Specifications

Digital to analog conversion rates:

up to 384k, 32-bit PCM, native DSD up to DSD256, DXD, @ 127dB Dynamic Range

MQA decoding:

Built-in and certified MQA

hardware decoder

Digital inputs:

USB2 Class2 (OSX, Linux driverless, all formats) AES/EBU (PCM up to 192k, up to DSD64 DOP) 2 x S/PDIF (PCM up to 192k, up to DSD64 DOP) Toslink/ADAT 2 x S/PDIF (PCM up to 192k, up to DSD64 DOP)

Analog outputs:

1 pair of unbalanced RCA 1 pair of balanced TRS TRS to XLR Metropolis Cable can be added as option

Headphone amplifier:

Reference high-current, high-transient headphone amplifier 300mA @ 3 Watts, unbalanced single ¼” headphone jack Designed to drive high-impedance headphones 0.1 Ohm output impedance

DAC Chip:

Sabre ESS9018K2M

Clock generator:

Low-noise with 10ps of jitter

Firmware:

Upgradable via USB via Mytek Control panel application

Optional DC/battery power input:

12V DC

Dimensions:

WxDxH=5.5” x 8.5” x 1.74” / 140 x 216 x 44mm

Weight:

3lbs / 1.5kg

Warranty:

2 years

Manufacturer-suggested retail price (MSRP):

$995 / €995

Company:

Mytek Digital

Secrets Tags:

MYTEK, DAC, LIBERTY, Reviews, 2018, Headphone amplifier, Sabre, consumer, DAC and Amplifier Review 2018

Linkbacks

MYTEK LIBERTY shipping announcement

MQA at Consumer Electronics Show 2018

MYTEK BROOKLYN announcement at the Munich audio show

The Liberty is a 1/3-rack-unit-sized device that was originally developed for professional studio-recording use. Additional “one function” Liberty line products are anticipated later this year.

The Liberty design concept is to provide a simple, small and robust unit which can do one specific function very well. The Mytek Liberty DAC was intended to be a great-sounding USB DAC, that can play every possible format including full decoding of Master Quality Authenticated (MQA) files. The Liberty DAC is intended to provide a good balance of detailed, transparent, and musical sound while also being a very good headphone amplifier.

The Liberty DAC firmware is updateable via the Mytek Control Panel app. There will be new firmware releases as features are added. The content will be fine-tuned based on customer feedback.

Secrets Sponsor

googletag.cmd.push(function() { googletag.display(‘div-gpt-ad-1438634291880-0’); });

The USB input is asynchronous Class 2. That means the DAC runs on its exceptionally-clean internal master clock and requests data as needed, eliminating any jitter created by the source component. The USB input also accepts high speed formats not available on other digital inputs including signals up to 32-bit/384K in both PCM and DSD256 flavors, and up to DSD128 on a Mac using DOP.

When the non-USB, synchronous digital inputs are used, two methods are operating simultaneously for improved sound. Jitter reduction is accomplished not only by a sophisticated Phase-Locked-Loop (PLL) on the input, but also by the asynchronous architecture of the Sabre 9018 DAC chipset itself. Additionally, a low-jitter master clock is used for the last stage of data conversion.

Design & Setup

The Mytek Liberty DAC and headphone amp is the newest of the Mytek Digital products. It uses the Sabre ESS9018K2M DAC chipset – so I’ll start with a confession. Many reviewers as well as many on the internet have claimed that Sabre DACs have a characteristic sound. Some claim that the sound is detailed while others claim that the sound is bright and glare-prone in the lower treble. I’ve owned at least two Sabre-DAC-based products in the past. My first, an OPPO BDP-105 Blu-Ray player I considered quite detailed, but without the notorious “Sabre glare.” But my second Sabre product, the newer Oppo UDP-205 4K player, strikes me as crossing the line into the “bright and glare-prone” category.

So, I must admit that I had negative expectations for the Mytek Liberty DAC, based solely on its Sabre chipset. Now note that all these Sabre-DAC devices, including the both OPPOs and the Mytek Liberty, measure ruler-flat in the frequency domain. But the sounds are distinctly different; due (I’m presuming) to the filters used and the implementation and voicing of the output buffer amplifiers.

And not to keep you in suspense – the Mytek Liberty retains all the expected detail of the Sabre chipset without any of the brightness and glare. How Mr. J. and company managed this, I can’t say, but the results speak for themselves.

Looking inside the Mytek Liberty’s box gives no clue as to its sound either. If you’re looking for audiophile wiring, expensive brand-name resistors, or fancy film capacitors, you won’t fine them here. This is obviously a consumer product with its plethora of (reasonably high quality) polarized and non-polarized electrolytic caps.

My Mytek Liberty DAC was supposed to arrive with some TRS-to-XLR Metropolis (adapter) cables, but as you can see from the photo above, the only cables in the review box were the standard IEC power cord and a USB-2 cable. Fortunately, I had some adapters in my spare parts box, and was able to listen to the outputs via both RCA (unbalanced) and XLR (balanced) options.

After a very simple setup, the DAC is ready to play. The short and to-the-point owner’s manual is adequate and accurate. The front of the DAC includes a single tri-function rotary knob, a ¼” headphone jack, and a selection of very, very bright LED lights. The knob can be used as an on-off switch, an input selector, and a (digital-domain) volume control. Because this device is intended as either a professional rack-mount item or as an enhancement to computer desktop audio, no remote control is included. Now this omission is a bit disappointing in a device priced close to $1,000. But in keeping with the Liberty philosophy of “one use,” it is understandable. The Liberty DAC was never intended to be a preamplifier. So, in its role as DAC and headphone amp, a remote control would have been mostly superfluous. Even so, I can always wish…

The back of the Mytek Liberty DAC is equally straightforward. There are multiple digital inputs, a power socket, and two pairs of analog outputs. There is also a 12-volt input jack and Mytek suggests that using a high-current 12-volt source (such as an auto battery) can provide improvements in performance. I didn’t try this option, but can understand how it could be so, provided that sufficiently heavy-gauge connecting wire was used and that the socket/plug can pass enough current.

Secrets Sponsor

googletag.cmd.push(function() { googletag.display(‘div-gpt-ad-1438634291880-1’); });

I expect that few will avail themselves of the battery option, simply due to the inconvenience. However, if you do opt to try this, be aware that auto batteries contain sulfuric acid, that leaks can be highly corrosive, and that the battery cells can generate free hydrogen. That hydrogen must be vented and dispersed lest flammable mixtures occur. Blowing up your stereo would have a profoundly low spousal-acceptance factor! (I’m picturing snickering firemen too. Ed.) So, remembering that hydrogen gas is lighter than air, be aware that ventilation above the battery is mandatory. (Safety rant concluded…)

In Use

So how does the Mytek Liberty DAC and Headphone Amplifier sound? I first evaluated the DAC with the unbalanced outputs driving a power amplifier directly. The sound was clean and detailed with absolutely none of the “Sabre-glare” that I was expecting. This alone makes the Liberty DAC highly unusual in the galaxy of Sabre-DAC devices. My only complaint (the lazy-man’s one) had to do with the lack of a remote and the necessity to get up and cross the room for every volume adjustment.

I then used the XLR adapters to feed a fully-differential, fully-balanced integrated amplifier. With the Liberty DAC’s output set to 100%, I could use the analog and remotely-controlled volume control of the integrated amp. In this mode, I again found the sound far better than average.

I soon noticed, however, that my left channel sound was intermittent. After verifying that the DAC, amplifier, and interconnects were functioning properly, I noticed that my TRS-to-XLR adapters were too wide for the spacing allowed by the Mytek Liberty’s TRS jacks. The shoulders of the adapters were physically pushing each other aside, making for intermittent connection on the stereo ¼” phone plugs. This is not the fault of the DAC, and a slimmer pair of cables (such as Mytek’s Metropolis models) would certainly not have this problem. I mention it only to caution those who might try to employ adapters such as mine.

Finally, I listened to the headphone output using easy-to-drive Koss Porta-Pro headphones. Running these phones was a walk in the park for the Mytek, which is built to run very demanding headphones. But despite the “running at an idle” state of the Mytek, the Koss phones sounded as good as I’ve heard them.

So as a preamplifier, I rate the Mytek Liberty very highly. It is not my choice for a primary preamplifier only because of its missing remote volume control. But since preamplifier use was never the primary purpose of the Liberty, that should not be a deciding factor.

What the Mytek Liberty DAC is primarily intended to be is a very high-quality headphone amplifier. As I’ve said, my selection of headphones is very limited, since I’m not a big cans listener. My choices were Apple ear-buds (that I don’t like anyway and didn’t try) and the lightweight Koss Porta-Pros. The Liberty’s detail from my Porta-Pros was as good as any I’ve heard.

The good news is that my audio amigo has a pair of very hard to drive Sennheiser HD-600 headphones that he’s agreed to use with this Mytek. Once he has a chance to try those phones with the Mytek Liberty, I’ll update this review in the comments section to discuss how well the Liberty’s headphone amp works with really demanding headphones.

Associated Equipment

MacBook Pro running jRiver Media Center 22 (Media center was not used with 192/24, MQA, or DSD content)

Ixos digital interconnect for S/PDIF inputs of the Mytek

AudioQuest and Blue Jeans interconnects

Emotiva BasX A-300 power amplifier

Yamaha A-S2000 integrated, balanced amplifier

Straight Wire and AudioQuest speaker wires

Thiel 1.6 speakers with and without subwoofers

Tekton Pendragon speakers with no subwoofers

RBH MC-6C sealed bookshelf speakers with subwoofers

PowerSound Audio S3601 dual 18” subwoofer

RBH DSA-31 10” subwoofer

A variety of music was used while auditioning the Mytek Liberty as a preamplifier. Included in my notes are:

“One Night In Rio” by Louie Austen – (Hôtel Costes byStéphanie Pompougnac)

Louie’s voice is one that can sound unnatural through many DACs, but the Mytek Liberty nailed his whiney tone perfectly here.

“Barflies at the Beach” by the Royal Crown Revue (New Music from Interscope Records 1997)

The big Royal Crown band should blare without glare. With this DAC, they do.

“Banned in the USA” by The 2 Live Crew (As Nasty As They Want To Be)

There is a great host of sound effects in this song, from news announcers to samples of “My Country ‘Tis Of Thee.” This is an oldie, but a goodie, and the sound effects should be startling in their diversity. The Mytek brings the goods!

“Cast Your Fate To The Wind” by (the late) Allen Toussaint (Allen Toussaint 1971)

This soulful take on an old classic is so much fun, in my opinion, that it should be part of almost every review. Allen’s piano should sound real and present without any portion of its frequency range sounding recessed or excessively forward. The Liberty manages a clean and nuanced presentation.

“Pukara” by Andean Symphony V (Inca Gold, 1998)

The bass wind instrument (I’m not sure of the name) on this recording is difficult to reproduce. Some DACs have disassociated the puff of the breath and the hum of the wooden instrument. But the Mytek makes the combination a whole. Even so, some of my speakers fought the music (being mostly a satellite-subwoofer-crossover artifact, I think). But headphone listening makes clear that the disconnect is not the fault of the Liberty.

“Un Fiesta Anima” by Padu Del Caribe (Cu Amor | Carino)

This is “love it or hate it” music, and I’m obviously in the former camp. I find the juxtaposition of the piano and out-of-time accompaniment to be a musical jolt, but an enjoyable one. Others for whom I’ve played this music absolutely can’t stand it. But what I think makes this a good recording for analyzing a DAC is that deliberately discordant timing makes the listener pay more attention to the sounds of the instruments. If the DAC cannot differentiate between all the things happening in the mix, this song can sound like a disorganized jumble. But if the tonality is right, this music is great, great fun. Again, the Mytek nails it!

“Orleans Stomp” by The Cruel Sea (Honeymoon is Over 1993)

Yes, I’m partial to New Orleans music. And this one reminds me of the Meters in its presentation. Again, a dense mix demands a lot from the DAC, and again, the Mytek seems to come through without any of the dreaded “Sabre glare.” Well done.

“Scarlotti Sonata K. 491” by Vladimir Horowitz (A Reminiscence – 2004)

Solo piano is always one of the toughest tests of a DAC (and the rest of the system, for that matter). Since we’ve all had plenty of experience hearing real pianos in real spaces, our minds are calibrated to the live sound. Some DACs emphasize one part of the frequency spectrum over another, making a pianist sound as if she or he is playing louder and softer (or often closer and farther away) as the music ascends or descends the keyboard. But to my ears, the Mytek provided a unedited frequency response from one end of the instrument to the other.

“Wieniawski Scherzo Tarantelle” by Itzhak Perlman (Itzhak Perelman Encores – 1988)

So, HERE’S where any glare will be evident (if it’s there to be heard in the first place). The fundamentals and overtones of the violin strings and its body sounds span the entire upper midrange to treble region. The finger sounds and bow scrape should be clear and obvious without being dominating. If Mr. Perelman doesn’t seem to be in the room with you, something’s wrong. If the instrument sounds screechy, something’s wrong.

Here’s where I listened most closely for the “Sabre glare”, to my surprise and pleasure, I found none from the Mytek Liberty. If only my OPPO 205 had such poise and neutrality! Ironically, my older 105 Oppo COULD present this music as well as the Mytek does. But rest assured that to my ears, the Mytek is as glare-free as two of the best DACs I’ve yet auditioned, Schiit’s Gungnir Multibit and Rega’s DAC-R.

Bellezza Crudel – Vivaldi “Cupido, Tu Vedi by Tone Wik & Baokkanerne”

Vivaldi Cantata Rv 679: Che Giova Il Sospirar, Povero Core – Aria: Cupido, Tu Vedi by Tone Wik & Baokkanerne.Playing this off the hard drive in full MQA provided a better image (both side-to-side and front-to-back) than my previous Meridian Explorer II in hardware MQA mode. The imaging, through the Mytek, also exceeded the performance of my previous AudioQuest Dragonfly Red in software MQA mode.

Why this is so, I won’t even speculate, because the MQA format itself is supposed to minimize playback variability. But the sound spoke for itself, and the Liberty DAC delivered yet again.

Almost all the above music was played via the TOSLINK optical and the S/PDIF coaxial inputs of the Mytek Liberty DAC. To test the USB capabilities, I hooked up my MacBook Pro directly to the USB input of the Mytek, made a few changes in the setup, then tried a variety of 192/24, MQA, and DSD files. All played perfectly, and without trouble. The lights on the front of the Liberty DAC confirm the type of file currently playing. The MQA material (mostly downloaded from the 2L website) was particularly pleasant.

I’ll mention again that my limited trial of the headphone amplifier was done using Koss PortaPro cans, and that I’ll be sure to follow-up this review in the future with at least one, and preferably more, harder-to-drive headsets.

Conclusions

The MYTEK LIBERTY DAC AND HEADPHONE AMPLIFIER offers exceptionally good sound with a smooth and detailed frequency response that avoids glare. Its price is commensurate with its performance.

Likes

Avoids the lower treble brightness that some Sabre chipsets exhibit

The ability to run balanced or unbalanced outputs allows flexibility

MQA-in-hardware decoding is still a rare feature in DACs

Full hardware MQA capability

This DAC sounds very good!

Would Like To See

A remote-volume control would have made this a viable preamp

The front panel LEDs are exceptionally bright – a dimmer control would be nice

As a balanced and unbalanced DAC and preamplifier, the Mytek Liberty has superb technical chops. Its ability to handle any and all sources I threw at it (including MQA, DSD, and high-bitrate files) exceeds that of any other device I’ve tested. On the other hand, the lack of a remote-control volume pretty much disqualifies the Liberty (for most potential buyers) as anything but a headphone amplifier. This is in keeping with the Liberty’s stated design goal of “one-function, done very well.”

The sound of the Mytek Liberty is also exceptionally good. Better, in fact, than any other DAC I’ve yet heard that uses the Sabre-brand chipset. Apparently, significant attention was paid to filtering and buffering, and that attention shows in its highly-dynamic sound that (at least in my system) lacks any hint of harshness or glare.

Used within its intended parameters, the Mytek Liberty DAC and Headphone Amplifier seems like a winner to me!

The post Mytek Liberty DAC And Headphone Amplifier Review appeared first on HomeTheaterHifi.com.

Mytek Liberty DAC And Headphone Amplifier Review syndicated from http://onetwothreemovies.blogspot.com/

[inventivaindia]

Telia tests world’s first 5G movie theater with livestreaming films

Telia tests world’s first 5G movie theater with livestreaming films

Smartphones have gained popularity as video players over the past decade, but movie theaters have been adapting to the times, and their next evolutionary step could see big and little screens sharing the same streaming technology: 5G. In a partnership with Norwegian cellular carrier Telia, Odeon is now operating the world’s first 5G movie theater, displaying films that have been transferred over…

[camerausermanual4-blog]

Digital Camera Information

camera user guide

Digital Camera Software

A blend of a digital camera, a colour scanner and image manipulation applications is highly suggested. The program digital camera software that's comprised also provides professional grade workflow options for easy use.

The majority of the program is intended for digital camera users, compatible with most current digital camera versions.

camera user guide

Photo editing software & photo printing software that is renown for its simplicity of use. At last there is easy-to-use digital camera applications for both business and home users.

Picture

The image sensor used by the majority of digital cameras is a charge coupled device (CCD).  Some present digital camera models save mixtures of video (MPEG or AVI films), picture sequences or audio. Although Canon's graphics are marginally better, the Casio is a ultra-thin, glossy digital camera that does not sacrifice overall picture quality.

Easy-to-understand details regarding digital cameras, accessories, picture editing and much more. Picture quality is dependent upon the resolution of this camera. To make image files virtually every digital camera employs some type of compression. This EasyShare digital camera's resolution of 5 megapixels, 3x optical zoom along with an all-glass lens combine for amazing image clarity and detail.

Resolution is the most talked about digital camera feature and is frequently utilized to refer to image quality.

In case you've got the choice, select optical instead of digital picture stabilization on your camera. It's most likely the finest digital camera created and generates image quality which rivals medium format film (e.g., 6x6cm Hasselblad).

Picture processing for single-sensor digital camera: a mathematical barrier This entry is from Wikipedia, the leading user-contributed encyclopedia.  A normal slave unit will fire the pre-flash it senses while the digital camera captures the image on the flash.  The picture quality accessible from digital cameras is surprisingly great.

Film

In reality, an electronic camera is much better than a film camera in several vital respects! The electronic cameras enjoy the benefit of a built-in electronic signal processor your roll of film does not have.

Many digital cameras are somewhat similar to a 35 millimeter camera at cost without the additional added cost of purchasing or growing film. Back to top Printing images Unlike with film cameras, you can print digital photographs at home.

Is contemplating putting off the evolution of new movie cameras since it targets resources on its digital camera company. Though digital cameras do not use film, they've embraced the exact same evaluation system for describing the sensitivity of this camera's imaging sensor. Thus far, very few digital cameras are created using a receptor employing the complete size of 35mm movie.

Whether you are using a digital camera, bring a sturdy tripod.  Shooting with a digital camera is a bit like shooting slide film.  A few years back, I got to the digital camera item to the point I made my roll film cameras. The electronic camera situation is comparable because mega pixels are much like movie size. To design and construct a high performance electronic cine camera together with the standard of 35mm movie and ease of a camera.

Quality

The level of your pictures could be improved by the digital camera accessory you pick. You'll find quality manufacturers of digital cameras, 35mm cameras, lenses, video cameras, memory cards and camera accessories at reasonable rates.  An simple to use quality digital camera purchase will be completely employed by employees and pupils. But, not all digital cameras can produce prints of the identical quality.  I desired a go-anywhere high quality digital camera that is user friendly with both manual & auto controls. At the less expensive end of this camera climb, the grade could be notable for the purchase price.

Purchase

It's much better to get a digital camera using a 100% glass lens to get your very best photos. Many retailers promote their very best buy digital camera a single using a plastic lens. It's also advisable to search for the best buy digital camera packs together with the maximum RAM which you could spend. A good deal of unscrupulous retailers can advertise a price for a best buy digital camera but charge high transport prices.

Lastly, make sure that you have accounted for almost any delivery costs prior to making your final decision on which best buy digital camera you buy. There has never been a better time to get a digital camera. Needing to purchase re-chargeable batteries and a charger will normally include from $20 to $100 to the price of your camera.

As a individual constantly taking photographs I made this webpage for a good deal of individuals keep asking me what digital camera they ought to buy.  Try before you buy - I have always been a firm believer that you ought to take care of a digital camera before buying it.

Size

Experienced digital camera consumers understand pixel size is not everything. The small size and flexibility allow simple integration of digital cameras to all areas of the program. Should you care more about cost and characteristics than compact dimensions, pick a normal size digital camera.

There are 3 fundamental "dimensions" of electronic cameras, and understanding what size camera matches your requirements will make your look easier. For digital SLR cameras with interchangeable lenses it is harder as different cameras have different size detectors. That is the reason why I'm currently searching to get an additional digital camera with a minimum size along with a maximum number of helpful capabilities.

All these are all about the size of a matchbook and utilized in electronic cameras produced by Nikon, Canon, Kodak and lots of more. When deciding on a digital camera you need to consider the resolution of these images, memory and size. A larger inner diameter makes the L-Ring 3200 ideal regardless of the lens dimensions of your camera. This doesn't have anything to do with your own camera being digital it's entirely a consequence of smaller frame dimensions.

Video

However, modern digital photography cameras have a video function, and also a growing number of camcorders have a still photography function.  Modern compact digital cameras are typically multifunctional, using a few apparatus capable of taking photos, video, or audio.

Classification Digital cameras can be classified into different categories: Video cameras Professional video cameras such as those used in television and film production.  Some digital cameras have direct video outside.... Another option, though not directly an electronic one, is to buy one of those analog peephole movie cameras.

Lens

The superb multi layer lens coating reduces ghost and flare, a more frequent problem with digital cameras. The huge majority of digital cameras are "point-and-shoot" versions with just one, noninterchangeable lens. Because auto focusing on many digital cameras is performed via the lens, the attention change is automatically taken care of. Exposure and Focus: Fixed-focus electronic cameras have a lens that's preset to concentrate at a particular selection. All these are based on the real (rather than relative) diameter of the lens aperture, making them particularly painful for electronic cameras.

Memory

You will get a memory card reader or extra battery to keep your digital camera powered up for any circumstance.   SD is currently the most popular kind of digital camera card. Various kinds of memory cards are accessible for use with your digital camera. Documents deleted from PC, digital camera or memory stick may be restored with higher speed and dependability. When using your camera to create movies it's also extremely important to have ample Flash Memory available too.

Battery

All digital cameras can operate on rechargeable batteries one of 2 kinds: a costly battery package or a pair of AA batteries. A battery is recorded to the inside cover of this box the Olympus digital camera arrived in. Just take a few minutes to shop around, keep your camera, digital camera or notebook computer functioning like brand new with a new battery now! The Digital Camera Battery can power two devices at precisely the exact same time and has adjustable outputs that fit each device.

Photography

BytePhoto.com - Digital camera reviews, digital photography tips, forums and free photo sharing for digital photography fans.  Jen Roesner from Germany has an entire site devoted to digital infrared photography, such as a comparison table of different cameras' IR sensitivity. Not quite essential in digital photography because the camera's white balance system corrects to the color temperature of the scene. Back to college - If you're a beginner or a professional, then there are a lot of free online classes in electronic photography and cameras.

Looking

If you are looking to update, you can sell your old digital camera and use the funds to buy that latest spiffy digital camera.  Whether you're searching for your first camera or you are a seasoned professional Digital Camera has everything you want.