#daslapbox

[dabadnewz]

Sound deadening is probably the easiest way for anyone to instantly improve the sound quality in their car by blocking out the outside noises and minimizing vibrations.  The results are instantly noticeable and worth far more than the modest price on Amazon.

In this video I add sound deadening to the doors and door panels of my 2011 Scion xB car audio build called DaSlapBox

It’s not a racecar, it’s a bass car

I used a 36sqft pack of Noico 80 mil and managed to do all four doors and several interior panels

Check it out!

[dabadnewz]

#DaSlapBox recently received the Big 4 Upgrade courtesy of some @SkyHighCarAudio 1/0 gauge!! The Big 4 (usually the Big 3), is an upgrade to the electrical system that helps the battery charge faster, as well as helping it to keep its charge. The usual Big 3: Positive - Battery to Alternator Ground - Battery to Chassis Ground - Battery to Engine Mine will be the Big 4 because I'll also be adding a ground between the battery and the alternator (as per the alternator manufacturer's instructions). Check out the link in the bio for the full video! #CarAudio #CarAudioAddicts #CarAudioInstallation #CarAudioSystem #CustomCarAudio #CarAudioWorld #CarAudioLife #SkyHighCarAudio #SHCA #0gauge #ChargingSystem #BassHeadLife #BassHeadNation #BuildItYourself #SanDiegoCars #DaSlapBox #Slappin #MechmanAlternators #HighOutputAlternator #CustomAudio #ItCanNeverB2Loud #SPLBass #SubwooferBox #B2loud #Big3Upgrade #Big4Upgrade #CarAudioBig3 #Big3CarAudio (at Rec Life Media) https://www.instagram.com/p/CDAEZEvgJzr/?igshid=wrcast2ptsts

[dabadnewz]

Finally got around to upgrading the Big 4 in "DaSlapBox”!

The Big 4 (usually Big 3), is an upgrade to a car’s electrical system that allows the battery to charge faster and more efficiently while also helping it to maintain a charge.

This is such a crucial upgrade for car audio systems because the additional amps and accessories draw much more power than the car would from the factory, so wires that can handle greater electrical currents are necessary (if not required)

The wires that get upgraded in a typical Big 3 upgrade are: + Battery to Alternator - Battery to Chassis - Battery to Engine

My setup will be a little different since I’ll be doing an extra wire between the battery and alternator grounds.  I’ll also be going from the chassis to the engine instead of battery to engine, since this is how my car is set up from the factory