#powerrangersdino

[darksteedstudios]

For just $50.00 3D printed Fallout Pipboy. This item is printed in black or white ABS Filament and dipped in a vapor bath to smooth and shine the item and ready to be painted. The Pipboy comes in two parts the top and bottom. They are secured by tiny strong magnets. If you have a color preference please note it in check out or you will receive the item in black or white.

[meganews77-blog]

Strongest Power Rangers Dino Charge Villains Sledge Sledge is an intergalactic bounty hunter who prides himself on capturing monsters (which he sends to fight the Rangers) and collecting the bounty on their head, as well as collecting asteroids. He is rather ill-tempered to his subordinates, though he does show a softer side to his fiance Poisandra. He plans to capture the Energems and gain ultimate power for himself. During pre-historic Earth, Keeper set a trap, setting his ship away from Earth and his asteroids caused the extinction of the dinosaurs. He tried all he could to get the Energems from the Rangers, he ultimately got the Purple and Red energems but was thwarted by the Red Ranger and is presumed destroyed. Fury Fury is the ill-tempered and irritable general to Sledge, who wields a Seven-Branched Sword that can harness lightning. After arriving on Earth, Fury is sent to capture the Energems from Keeper. But Fury falls for a trap set by Keeper that crippled Sledge's ship. Though assumed to have been caught in the asteroid debris, Fury survived and became a reoccurring nemesis to Keeper for millennia. Tyler believes Fury to be connected to the disappearance of his father, even though the two met, his father was safe. SIr Ivan was trapped inside of Fury for a couple of hundred of years until the Rangers helped him escape. Fury now serves Heckyl/Snide. Wrench Wrench is another of Sledge's generals who has a whiny personality if he is badly hurt. Though he serves as the ship's technician, Wrench can use a battle axe in a fight. Wrench was also the one who created Curio for Poisandra. Wrench created various devices such as a device to use Ivan's energy, a weapon using the Energems, a monster duplicator and other devices. Poisandra Poisandra is Sledge's heart-themed fiance and her own agenda is to get married to Sledge. However, he constantly puts their marriage plans on hold due to his immense greed. Poisandra has musical-themed attacks. When Sledge got the Red Energem, Poisandra was ready to leave Sledge but once he was believed to be dead, she mourned him. Under Heckyl/Snide's reign, she barely ever goes down to Earth but does make the odd comment here and there. Curio Curio is a doll-like companion of Poisandra that Wrench created out of spare monster parts as an early wedding present while doubling as a means to keep Poisandra at ease while Sledge focuses on retrieving the Energems. Snide Snide is Heckyl's monstrous side, they exist in the same body. When Snide is in charge, he can see Heckyl on his sword. When Heckyl is in charge, he can communicate with Snide on his pocket watch. Snide is ill-tempered and all about brute-force. The Rangers met him before Heckyl. Singe Singe is an alien who arrives in a burning ship on Earth, met Snide and he partners up with him to get the Energems. He does not get along with Fury, they often argue and Heckyl traps both of them in the same prison. Singe is upstoppable against the Rangers, grows big but because he is winning, Fury shrinks him down. Singe also uses Zotak rings on the Rangers' energems and even on Fury to de-power him. #powerrangers #powerrangersdinocharge #powerrangersdinosupercharge #powerrangerssuperdinocharge #powerrangersdino #dinopowerrangers #powerrangersvillains #powerrangersdinochargevillains #dinochargevillains #powerrangersdinosuperchargevillains #powerrangersdinochargevillainfigures #Sledge #Fury #Wrench #Poisandra #Curio #Snide #Singe https://youtu.be/D6H4y70XoMk

[darksteedstudios]

For just $25.00 Deadpool movie costume chest knives and sheath as seen in the Deadpool movie! They are 3d printed and ready to attach to a costume or paint! You will receive either 2 knives and sheaths or sheaths depending on the option you select! Please note current time to ship is 3-4 weeks. If you need an item earlier please contact me to see if it can be arranged.

[darksteedstudios]

For just $85.00 Xena’s Sword! I offer two version one fully finished as seen in the photos and a raw printed version show in the last two photos please be sure to select the version you want! The sword is printed in ABS filament and dipped in a vapor bath to smooth and increase durability. Total length is 32” long! The finished version is made using inlaid paua shells and a leather wrap on the handle. Please note current time to ship is 3-4 weeks. If you need an item earlier please contact me to see if it can be arranged.

[darksteedstudios]

For just $85.00 Xena’s Sword! I offer two version one fully finished as seen in the photos and a raw printed version show in the last two photos please be sure to select the version you want! The sword is printed in ABS filament and dipped in a vapor bath to smooth and increase durability. Total length is 32” long! The finished version is made using inlaid paua shells and a leather wrap on the handle. Please note current time to ship is 3-4 weeks. If you need an item earlier please contact me to see if it can be arranged.

[darksteedstudios]

For just $100.00 Xena’s Chakram! 10” diameter fitted with paua shells! Please note current time to ship is 3-4 weeks. If you need an item earlier please contact me to see if it can be arranged.

[darksteedstudios]

For just $80.00 Power Rangers Dino Thunder White Drago Sword! This sword is 30" long and it is 3d printed in ABS plastic and painted as shown. The sword weights approximately 2lbs if not less! There are two options for purchasing, one with the holster and one without! Please note current time to ship is 3-4 weeks. If you need an item earlier please contact me to see if it can be arranged.

[darksteedstudios]

For just $80.00 Power Rangers Dino Thunder White Drago Sword! This sword is 30" long and it is 3d printed in ABS plastic and painted as shown. The sword weights approximately 2lbs if not less! There are two options for purchasing, one with the holster and one without! Please note current time to ship is 3-4 weeks. If you need an item earlier please contact me to see if it can be arranged.

[darksteedstudios]

For just $50.00 Go Retro with this Power Rangers Dino Thunder White Drago Morpher! It comes with a moving jaw as well as interchangeable face plates! The item is 3d printed in ABS filament sanded and all prepped for painting! I do offer a painted option as well which is seen in the photos! You will get the following: Movable Jaw Morpher Base Dragozord Face Parazord Face Stegazord Face

[darksteedstudios]

For just $130.00 Power Rangers Dino Thunder Brachio Staff 3d printed and painted! Total length is 37" long! Please note current time to ship is 3-4 weeks. If you need an item earlier please contact me to see if it can be arranged. I offer two options.. one finished and painted and unpainted. Please note the unpainted version may come in a different color than shown.

[darksteedstudios]

For just $80.00 Power Rangers Dino Thunder White Drago Sword! This sword is 30" long and it is 3d printed in ABS plastic and painted as shown. The sword weights approximately 2lbs if not less! There are two options for purchasing, one with the holster and one without! Please note current time to ship is 3-4 weeks. If you need an item earlier please contact me to see if it can be arranged.

[darksteedstudios]

For just $180.00 Blue Ranger’s Power lance! Can be used aa staff or two tridents! 72” long!

[darksteedstudios]

For just $80.00 Power Rangers Dino Thunder White Drago Sword! This sword is 30" long and it is 3d printed in ABS plastic and painted as shown. The sword weights approximately 2lbs if not less! There are two options for purchasing, one with the holster and one without! Please note current time to ship is 3-4 weeks. If you need an item earlier please contact me to see if it can be arranged.

[darksteedstudios]

For just $25.00 3d printed and ready for painting! The buckle comes in four pieces as show for easier painting! Please note current time to ship is 3-4 weeks. If you need an item earlier please contact me to see if it can be arranged.

[darksteedstudios]

For just $25.00 Deadpool movie costume chest knives and sheath as seen in the Deadpool movie! They are 3d printed and ready to attach to a costume or paint! You will receive either 2 knives and sheaths or sheaths depending on the option you select! Please note current time to ship is 3-4 weeks. If you need an item earlier please contact me to see if it can be arranged.

[darksteedstudios]

For just $50.00 Power Rangers Light Speed Rescue Titanium Ranger Morpher! 3d printed sanded and ready for paint if you select the not painted option. Please note current time to ship is 3-4 weeks. If you need an item earlier please contact me to see if it can be arranged.