#rc10b6.1

[teamassociated]

Team Associated and Reedy Dominate Australian Nats 1/10 Offroad

Team Associated and Reedy Power dominated the 1/10 Australian Nationals with Chris Sturdy (2WD Modified) and Andrew Selvaggi (2WD 17.5) taking TQ and first, with AE filling nine out of ten spots in the 2WD Mod A Main! Around 230 entries were received from all around the country for the event, and the club prepared a brand new outdoors fast and challenging dirt track layout. (Pictured: 2WD Mod podium.)

More: http://bit.ly/2Co58HV

[teamassociated]

In stock and shipping: Limited Edition RC10B6.1DL Team Kit.

The Limited Edition B6.1DL will be the buggy of choice for tracks with very high traction where a forward mass is beneficial and chassis roll needs to be tamed through a low center of gravity. The B6.1DL has a Laydown Stealth(R) transmission that gives the car additional traction when exiting the corners. The addition of +1 Ackermann plates and gull wing suspension arms tune the steering for a razor-sharp feel and more control. The B6.1DL features our easy-access differential, diff height adjustability, and an all-new slipper with the speed, durability and lineage expected of a true champion.

More: http://bit.ly/asc90021L

[teamassociated]

New! B6.1 Aluminum Differential Height Inserts

Replace your standard diff height adjusters with these long-lasting aluminum versions. Orientation numbers are etched onto the inserts, making them easy to read. Compatible with RC10B6.1, RC10B6.1D, RC10B6.1 FL, RC10T6.1, and RC10SC6.1

More: http://bit.ly/asc91793

[teamassociated]

In Stock and Shipping! RC10B6.1 Factory Lite Kit

Team Associated's RC10B6.1 has been met with wild success by racers across the globe. As good as that may be, the engineers of Team Associated's Area 51 became aware of the advantages that could be gained in certain track conditions by racing a lighter-weight B6.1.

More: http://bit.ly/asc90022

[teamassociated]

Pill Chart/Inserts Calculator

The aluminum rear arm mounts use eccentric pill inserts to make fine adjustments to anti-squat, toe, pin height, and pin width. Now online at http://bit.ly/ateamapps

[teamassociated]

5 Team Associated Podium Wins at the Pro-Line Summer Off-Road Shootout

(Pictured: 2WD Open Buggy Podium, Broc Champlin, winner.)

It was a successful weekend for Team Associated and Reedy Power at the 22nd Annual Pro-Line Summer Off-Road Shootout hosted by Rainman's Hobby and R. C. Raceway in Bakersfield, CA. For the first time, the Shootout (previously held at Hot Rod Hobbies) was moved to an indoor facility. The two-day event was held Saturday and Sunday, June 29-30, 2019. The event featured a 3-round qualifying format Saturday, and Triple-A mains for all classes Sunday. Drivers were challenged with changing track conditions and grip level throughout the event. The drivers who could stay in the narrow groove found their way to the top.

Full results: http://bit.ly/2XHGxe5

[teamassociated]

New! Limited Edition RC10B6.1DL Team Kit

The engineering continues. The Limited Edition B6.1DL will be the buggy of choice for tracks with very high traction where a forward mass is beneficial and chassis roll needs to be tamed through a low center of gravity. The B6.1DL has a Laydown Stealth(R) transmission that gives the car additional traction when exiting the corners. The addition of +1 Ackermann plates and gull wing suspension arms tune the steering for a razor-sharp feel and more control. The B6.1DL features our easy-access differential, diff height adjustability, and an all-new slipper with the speed, durability and lineage expected of a true champion.

More: http://bit.ly/2LBixUe

[teamassociated]

Team Associated and Reedy dominated Modifieds at Keilor Invitational

Team Associated and Reedy dominated Modifieds at Keilor Invitational Team Associated and Reedy dominated the Modified class race results at the 2019 Keilor Invitational in Australia, with AE / Reedy factory drivers Ray Munday (Invitational Modified) and Cameron Zammit (Open Class 2WD and 4WD Modified) taking the overall victories.

More: http://bit.ly/2HeYFTb

[teamassociated]

NEW! Factory Team Titanium Top Shaft Screw

This new top shaft screw replaces the stock steel version found in the B6.1, B6.1D, T6.1, and SC6.1 Team Kits. It reduces the rotating weight and comes with preinstalled pin for easy assembly.

Compatible with layback, laydown, and standup gearboxes when using the slipper clutch. Weighs 40% less than the stock steel screw.

More: http://bit.ly/asc91797

[teamassociated]

New! FT Carbon Laydown Gearbox and Chassis Braces

The carbon material offered by Factory Team has become a popular upgrade for many parts across the Team Associated line of race cars. Adding rigidity to suspension components and limiting chassis flex is a great tuning option for race cars. The carbon laydown gearbox and chassis braces reduce the flex in the rear of the chassis, resulting in a more consistent and precise feel on track. This set is a direct replacement for #91791 and #91709.

Available: now. (Pictured: #91952 RC10B6.1 FT Laydown Gearbox and Chassis Braces, carbon.)

More: https://tinyurl.com/asc91952

[teamassociated]

New! RC10B6.1 FT Carbon Fiber Standup Motor Plate

New for the Factory Team brand is the carbon fiber standup motor mount. This 3mm thick motor mount is lightweight and replaces the discontinued blue aluminum version #91794 RC10B6.1 Standup Motor Plate.

This mount is great for dirt or oval racers who want to convert to the standup transmission. Use #91717, 91788, and 91798 gearbox parts to complete the conversion.

Fits RC10B6.1 series, RC10SC6.1, and RC10T6.1, when used with the #91788 gearbox.

Available now. (Pictured: #91787 RC10B6.1 FT Carbon Fiber Standup Motor Plate.)

More: https://bit.ly/asc91787

[teamassociated]

In Stock and Shipping: RC10B6 Series Option Parts

Racers now have a full range of Factory Team option parts for the new RC10B6.3, some of which fit other Team Associated vehicles. Whether these options are used to bling up your ride on the bench or to gain a performance advantage on track, Factory Team has you covered. See full part descriptions and compatibility details below. Available now. (Pictured: #91907 RC10B6.1 FT Laydown/Layback Motor Plate, 3.5mm, blue.)

More: https://bit.ly/3eYFOuL

[teamassociated]

NEW! FT Graphite Laydown/Layback Motor Plate

Our new Factory Team Motor Plate adds strength and rigidity with its 3mm thick material, while also reducing the weight by 40% over the stock motor plate. It fits the Laydown and Layback gearboxes on the B6.1, B6.1D, T6.1, and SC6.1.

More: http://bit.ly/asc91796