#usb3.0 hdd

[atplblog]

Price: [price_with_discount] (as of [price_update_date] - Details) [ad_1] 【Wide Compatibility】- 500GB Portable External Hard Drive, Y-Design, 2.5 Inch SATA USB 3.0 HDD, Fast Data Transfer. Also compatible with Windows, Linux and Mac OS systems, compatible with WD, Seagate, Samsung, PS4, TV, and other devices. 【USB3.0 5Gbps】- Adopting with USB 3.0 interface and UASP accelerated transmission protocol supported, the Portable Hard Drive can help with the data transfer rate up to 5Gbps, about 20% faster than traditional USB data port, transfers 1G file in 3 seconds, no data delay. 【Easy to Use, Plug and Play】- From installing to using only few seconds; connect attached cable to your devices, then you can open files, play videos, back up data, etc. Support hot swap. [Note: Please format the new hard disk before using it. When use finished, eject the drives then unplug the cable. Do not unplug the cable halfway to avoid data loss.] 【Shock-proof Performance】- with a shock-proof sponge pad, enhance the protection of the hard drive effectively and keep it steady. 500GB Portable External Hard Drive, Y-Design PLUG AND PLAY EASY TO CARRY [ad_2]

[howzitsa]

Raidmax H704 ARGB Sync Gaming Chassis - Black The Raidmax H704 features a very clean and modern-looking design thanks to a closed-up front with a slanted grille design for ventilation. An ARGB fan can be seen in the front behind the slanted grille giving it a very unique look. While the tempered glass side panel lets you show off all your hardware in a sleek and minimalistic-looking chassis. Built with an open grill composed of diagonal lines in the middle of the front panel and preinstalled 1 x 120mm ARGB fan at the front, this chassis allows for clearly viewing your front lighting effects while providing superior airflow circulation. You can get a grandstand view of everything in your chassis with the H704. Whatever gaming hardware or custom-loop cooling inside the chassis is shown in a panoramic view through a fully complete tempered glass side panel. The magnetic dust filter on the top of the chassis helps protect from dust while being easy to remove and clean. The front of the chassis supports up to 3 x 120mm fans while the top supports up to 2 x 140mm or 2 x 120mm fans, with 1 x 120mm fan in the rear of the chassis. The chassis also supports motherboards up to ATX in size, CPU cooler support up to 160mm, and graphics card support up to 315mm in length. This gives you multiple options when deciding which hardware to get. It also supports storage slots for 2 x 2.5″ SSDs, 2 x 3.5″ HDDs, and an ATX power supply. FEATURES: Modern and sleek front panel design with ARGB fan and grille Tempered glass side panel Cooling support for multiple fan and radiator layouts Maximum GPU length of 315mm A cleaner and more ventilated case with its top-mounted magnetic dust filter SPECIFICATIONS: Colour: Black Motherboard Support: ATX / Micro-ATX / Mini-ITX Expansion Slots: ​7 Chassis Material: Plastic, Steel, Tempered Glass 3.5″ HDD: ​2 2.5″ HDD: ​2 I/O PORTS: USB3.0 x 1, USD2.0 x 2, HD Audio Preinstalled Fans: Static RGB Fan 120mm x 2 (front & rear) Fan Support: Front Fan: 120mm x 3 / 140mm x 2 Top Fan: 120mm x 2 / 140mm x 2 Rear Fan: 120mm x 1 Bottom Fan: N/A Radiator Support: Front Radiator: 240mm Top Radiator: N/A Rear Radiator: 120mm Maximum GPU Length: 315mm Maximum CPU Cooler Height: 160mm Left Side Panel: Steel Right Side Panel: Tempered Glass PSU Support: Standard PS2 / ATX PSU (Bottom Mounted) Product Dimensions: 37 x 20 x 45.8 cm WHAT’S IN THE BOX: Raidmax H704 AUREOLA ARGB ATX Gaming Chassis – Black x1

[golondoner]

USB3.0/Type C 2.5'' HDD Enclosure Transparent

Supporting Hard Drive Capacity: 3TB External Interface: USB Package: No Internal Interface: SATA Case Material: Plastic Size: 2.5" Model Number: T09 Brand Name: UTHAI Origin: Mainland China 1: USB3.1 (type-c) main chip is ASM225 Tool-free installation; hot-swap plug and play; No Reboot or Additional Driver needed; Super Speed Transmission: With USB3.1 Gen1 Type-C to SATA III, data…

[tdsci]

(Renewed) Dell Optiplex 790 Desktop (IntelCore i3/8 GB RAM/ 1 TB HDD/ Windows 10 Pro,MS Office/Intel Q65 Express Chipset/DVD R/W, 17"Monitor(1398 x 780), Black

Price: (as of – Details) From the manufacturer Memory & Storage: 8 GB RAM with Intel HD Graphics 2000|Hard Drive: 1 TB HDDOperating System: Windows 10 Pro| Preinstalled Software: MS Office| In the Box: CPU,Power Cord,Monitor, Keyboard, Wifi Adaptor and MousePorts & CD Drive: 4 X USB 2.0 Ports,6X USB 3.0 Ports, DVDR/WHardware Interface: Usb3.0; Form Factor: Small Form Factor; Connectivity…

[kiran-s1-blog]

ORICO 2 Bay 2.5" / 3.5" USB3.0 HDD|SSD Standalone Clone Dock - Black

The Orico 2.5/3.5 inch 2 Bay USB3.0 1 to 1 Clone Hard Drive Dock makes it easy to connect internal 2.5″ or 3.5″ SATA HDDs or SSDs to your laptop or desktop computer. It supports solo cloning, which eliminates the requirement for a computer connection and increases convenience. It has built-in indicators and progress tones for easy cloning monitoring. It is compatible with Windows/Linux/Mac and…

[technodora]

🎮 Raidmax X902 Mid Tower Gaming PC Case with 3 Fans 🎮

Looking to upgrade your gaming setup? Check out this sleek and versatile Raidmax X902 Mid Tower Gaming PC Case with 3 Fans! It's packed with features to accommodate your gaming needs.

✨ Key Features: 🖥 Motherboard Support: ATX/Micro-ATX/ITX 🔌 Expansion Slots: 7+2 🏗 Materials: Steel + Plastic 💾 HDD/SSD Support: 2 x 3.5" HDD or 1 x 2.5" SSD (convertible), 1 x 2.5" SSD 🔌 I/O Ports: Power, Reset, LED Control Button, USB2.0 x1, USB3.0 x1, HD-Audio 🌬 Cooling System: Front Fan - 120mm x 3/140mm x 3, Top Fan - 120mm x 2, Rear Fan - 120mm x 1, Power Supply Fan - 120mm x 2 🌀 Included Fans: 120mm ARGB fans x 2 in front + 120mm regular fan in rear x 1 🌡 Radiator Support: Front - 120mm/140mm/240mm/280mm, Top - 120mm/240mm 📏 Max GPU Length: ≤ 270mm 💻 Max CPU Cooler Height: ≤ 160mm 🔍 Side Panel: Tempered Glass ⚡ PSU Support: ≤ 160mm (with HDD) / ≤ 295mm (without HDD) 🌬 Dust Filter: Top 🖤 Colour: Black 📏 Product Dimensions: 36.2 x 21.7 x 46.1 cm ⚖️ Product Weight: 4.35kg

This gaming PC case is in excellent condition and ready to take your gaming experience to the next level. Whether you're building a new rig or upgrading an existing one, the Raidmax X902 has you covered!

🚚 Delivery: We offer island-wide delivery, ensuring the secure packaging of your order. ⚖ Delivery charges: Calculated in accordance with the weight of your package. 💰 Payment methods: Facilitated through card payments (PayHere), Koko pay, bank transfers, and cash on delivery. 🤖 Pay in 3 interest-free installments with Koko pay, utilizing any debit or credit card. 💳 Installment plans: Spanning up to 12 months, are available through DFCC, Commercial, Sampath, and HNB Credit Cards. 📲 Reach out to us at +94 76 774 9986 👩‍💻 Connect with our digital assistant via https://wa.me/94767749986/ 📍Our location? Discover it here: https://goo.gl/maps/kDtEUL2mbkWe9ngd7 @ Athurugiriya 🛒 Visit our website and make your purchases online: https://www.technodora.lk/

[segotep]

How can a wide chassis benefit heat dissipation of your hardware

If you are a car lover, should know that a wide body and framework will make the car look more beautiful and wider tires and hubs will help the stability and speed when the car is turning. He case is the same to PC DIY. A wide chassis means more room inside, which is compatible with more types of hardware and it will the whole computer look appealing.

The case released recently by Segotep named Endura 1 is just one these cases. Though Endura 1 is small, but it is designed with a wide framework with ample room. Capsules for hardware are independent, so there will no be interference among hardware. This case is suitable for users who will build their computers will high-end hardware and flagship air coolers.

The front panel of the case is equipped with a big area of vents with a PVC dust-filter produced through back-stamping technology.It can both ensure more air can be taken into the case and protect the hardware against the dust which may ruin the appearance or even shorten the lives of the hardware.And please note that 2pcs of plastic screws are included in the bundle for fans to be installed in the front panel.

On the left is a 4mm thick transparent tempered glass, through which the hardware can be seen. Users who are found of RGB lighting will be interested in this design.The right panel is made of metal. Both sides of panels are designed with snap locking for stability and easier maintainance in the future.

The I/O ports in the panel include one USB3.0, one USB2.0 and a HD AUDIO jack.This is able to meet the basic need of ordinary users. But it would be better if these two USB ports were 3.0 version.

It can be seen from the top that the chassis is wide. It can provide better compatibility to hardware. As we just said, despite its compatibility with a 240 liquid cooler in its top, this case is a perfect match to a flagship air cooler. A dust filter is also available on its top front panel to protect the case against dust or foreign matters.

Regarding the motherboards, Endura 1 supports commonly-used ones from ITX to E-ATX(305*330mm or smaller), which brings convenience to users who change their cases really often. Because this is a way to save money of buying cases. Thanks to the wide body of the case, the motherboard and the liquid cooler will not interfere with each other or block the lighting and the heatsinks of the Memories.

On the other hand, a wide body also helps Endura 1 to support more air coolers. It is available to installation of any flagship air cooler with a maximum height of 175mm that you can buy in the market.The 8 fan bays in the case allow users to build a stereoscopic heat dissipation channel with cold air being taken in from the front and bottom panels and low out the heated air through the rear and top panels.

The ample room inside the case allows a 3-fan graphics card with a length of up to 350mm. The 7 PCI slots bring the case with easy compatibility of high-end RTX40xx graphics cards, and, it can be fit in with some GPU with 2 fans and thick heatsinks.

The capsule for PSU is independent for better hiding the redundant cables. What’s more, the hard drive bays on the bottom can be moved backwards or forwards.When moved backwards, it can make room for a PSU with a length of up to 190mm, which is always the size of a 1000W+ power supply.

We are going to build a whole pc with B760-chipped motherboard, 13490F CPU, Segotep LUMOS G6 white edition air cooler and MU1000G power supply. Let’s see how much room would be left after we putting in all the hardware.

The installation process was easy.The 24mm rear space in the back of this wide case, together with the flex cables of MU1000G power supply, has facilitated the cable routing. There is much headroom after the installation of the PSU, which made the connection of cables easy. And the hard drive brackets is compatible with 2pcs of 3.5 inch HDDs or with one 3.5 inch HDD and one 2.5 inch SSD.

With 6 heat-pipes directly contacting the CPU cover to improve its heat dissipation capability, the LUMOS G6 cooler, with single fan, is designed with a height of 158mm. All the fins are strung together with copper heat pipes with same pitches for faster heat spreading. All heat will be took away by the 120mm hydraulic hearing fan. By the way, the fan is built with shock pads on its both sides, it will be much easier for users to build heat dissipation channels as needed. With an air pressure of up to 1.98mm H2O and the maximum volume of 82.61 CFM, LUMOS G6 works just perfectly for this processor.

After being tested with OCCT for 10mins, the power consumption of the whole computer is just around 300W and CPU temperature is around 78℃ which suggests the wonderful capability of the LUMOS G6 cooler.And the 55.3℃ of the graphics card is to justify the reasonable heat dissipation channel of the case.

The wide body design of Endura 1 has pushed this case to a new high with its compatibility with hardware.It can be fit in easily with from ITX to E-ATX motherboards and from flagship twin-tower air coolers with a maximum height of 175mm to mainstream graphics cards.Admittedly, it is one of the cases with a high cost-performance rate in PC DIY industry. Moreover, a wide chassis will surely deliver better heat-dissipation performance with air coolers or 240mm liquid coolers. Besides, the appearance of this case is good-looking with a sense of quality and simplicity, it is just fine to go with any hardware. Don’t hesitate to buy Endura 1 if you are looking for a case of high-performance and expandability.

[123lineengineers]

Seagate Unadorned 5TB Desktop HDD in Dim

Product Description Seagate Unadorned 5TB Desktop Exterior Crisp Pressure in Dim - USB3.0 Seagate Unadorned pairs delivers easy drag-and-drop spare in a light-weight, compact design. The outcome? As much as 5 TB of difference bank on your pc in a conveyable brittle force that's absolute best for time at the cross. Give Your Laptop Residue Moveable Crisp Pressure Dimension Whether or not you need to separate up brittle force range to your Home windows pc or just again up recordsdata in order that you've were given a 2nd album, Seagate Unadorned makes it ridiculously simple - simply drag and leave! With as much as 5 TB of capability, there's enough quantity of room on your rising selection of recordsdata. Remove Your Additional Crisp Pressure Anyplace Light-weight, compact, and utterly transportable, Seagate Unadorned is designed with the intention to deliver a whole lot of recordsdata anyplace you cross. Simply slip the USB 3.0 exterior brittle force to your bag, head out, and tie for your pc by way of the integrated cable. Negative Device. Negative Fuss. On the subject of spare for Home windows, Seagate Unadorned will get directly to the purpose. You don't want to concern about putting in tool or anything - it's able to cross out of the field. To worth with Macs, merely reformat. Welcome to easy, on-the-go bank on your virtual international. Primary Options Leverage easy drag-and-drop usability Extend your pc's capability with a light-weight, compact answer Benefit from immediate plug-and-play PC compatibility Switch recordsdata speedy with USB 3.0, backward-compatible with USB 2.0 Source link Read the full article

[technationgr]

SEAGATE HDD EXT. OneTouch HDD 4TB, STKC4000401, USB3.0, 2.5'', SILVER

Rescue Data Recovery Services

[atplblog]

Price: [price_with_discount] (as of [price_update_date] - Details) [ad_1] Our 3.0 Portable HDD Drive (1TB) – Ready To Store. Simple To Use. Portable HDD Drive external hard drive uses USB 3.0 Gen 1 technology for transfer speeds of up to 5 Gbit/s – and with plug-and-play technology you’re able to quickly save and secure up to of media to a compact, portable device. Our 3.0 Portable HDD Drive includes ramp load design that prevents damage to the disk while mobile, and a shock sensor that will cut the power to protect data in the event of physical stress – so you can rest assured that your files are safe. 2.5” External Hard Drive | Two-Tone Matte and Gloss Finish | SuperSpeed USB 3.0 Gen 1 | USB-Powered | Drag-and-Drop Us COMPATIBLITY: Setting up this portable hard drive is effortless. Just connect it to your gaming console, PC, or laptop using the provided USB 3.0 cable, and you're all set. It works seamlessly with popular gaming systems. offering a versatile storage solution for all your data needs. ULTRA STORAGE CAPACITY: This external HDD provides plenty of storage for all your favorite games, game saves, and multimedia files. You'll never have to stress about running out of space again, as you can conveniently house your entire game library, music, photo, documents all in one location and access it effortlessly whenever you choose. USB3.0 - Adopting with USB 3.0 interface and UASP accelerated transmission protocol supported, the 2.5” HDD/SSD can help with the data transfer rate up to 5Gbps, about 20% faster than traditional USB data port, transfers 1G file in 3 seconds, no data delay. All-round Protection & Security Crafted - with high-quality ABS plastic and equipped with a high-performance chip, the 2.5" hard drive enclosure ensures all-round protection. It features over-current protection, over-voltage protection, and overheating protection to safeguard your drives and valuable data. The attached EVA foam pad also protects your hard disks from shaking and crashing issues. Universal Compatibility - This SATA to USB 3.0 offers broad compatibility with Windows, Mac, Linux, and most operating platforms. It is designed for 2.5-inch 7mm/9.5mm SATA HDD & SSD up to 6TB, providing quick connectivity to your laptop, PC, TV, PS4/5, and more. Compatible with brands like Western Digital, Toshiba, Samsung, Kingston, Crucial, Hitachi, and others. EASY PLUG & PLAY - This external hard drive is designed for hassle-free setup, with no need for extra software. Just plug the USB drive into your laptop, Mac, PC, or desktop, and you can begin transferring files immediately, without any complex setup.. [ad_2]

[howzitsa]

Unitek SmartLink Manta USB 3.0 to 2.5" SATA III Adapter Model: Y-1096 Color: Black Products Features: Convert USB to SATA interface. Support SATA III (6Gbps) / SATA II (3Gbps) / SATA I (1.5Gbps). Support 2.5 inch SATA HDD & SSD with any capacity. With USB3.0 specifications, data transfer speed up to 5Gbps. Backward compatible with USB2.0/1.1. With UASP (USB Attached SCSI Protocol) function, it accelerates data transfer speed up to 20%. With sleep mode function, it is automatically turn into sleep mode after no action for 30 minutes. Plug and play, no need to install the driver. Specifications: Product Dimension: 71mm x 41mm x 9mm Upstream: USB3.0 Type-A Male Downstream: SATA6G Cable Length / OD: 30cm / 4.5mm Package Contents: 1 x USB3.0 to SATA6G Converter 1 x User Manual Packaging: UNITEK Gift Box

[hdmicouk-blog]

Need Micro USB 3.0 Cable for connecting Portable External USB 3.0 Hard Drive to a Computer? Use Cablesson USB Version 3.0 A Male to Micro B Male Cable 1m - 5m.

[braveins]

2.5” SATA HDD/SSD Enclosure Alternative - High-Speed 6Gbps USB 3.0/Type-C Adapter Cable

If you want to connect your 2.5-inch SATA hard disk drive (HDD) or solid-state drive (SSD) to your computer without using an enclosure, you might want to try a high-speed 6Gbps USB 3.0/Type-C adapter cable. This cable lets you plug your HDD or SSD directly into your USB port and access your data with ease. It also supports hot-swapping and UASP protocol for faster transfer rates. Whether you need to back up your files, clone your disk, or expand your storage capacity, this adapter cable is a convenient and affordable alternative to a SATA HDD/SSD enclosure.

ORDER NOW