tallowren

[tallowren]

Because my friends were talking about hobbies, I'm back to building. My first 1/100 IBO kit and it's great. I haven't built 1/100 scale in a while, so it's weird getting used to large pieces again, but also the intricacies that can be made with small pieces at this scale. https://www.instagram.com/p/CLSou0CjBDd/?igshid=1lk63avllrxwe

[tallowren]

My warm up project to get me back into gunpla. The intention was simply to improve on an existing kit. From basic stuff like elongating parts to creating new elbow joints. First time making elbow joints, tough but rewarding. #gunpla https://www.instagram.com/p/B4Is47RBL_w/?igshid=scmvbweckrbd

[tallowren]

New Content

A friend told me to start writing, so I will.

If you like semi-longish reviews/recommendations about toku and why I love certain shows (and maybe why you should too), stay tuned to this blog.

Also some DnD stuff is incoming, but later.

[tallowren]

After a long break from model kits I'm back with a not-gunpla. I've built a Frame Arms kit before but I wanted to give Frame Arms Girls a try. My plan is for a Megaman Zero/ZX(A) look using my unbuilt Baselard parts. At the same time I do plan on going back to my other builds. I know the trap of always starting new things and never finishing anything and that's how a backlog forms. #framearmsgirl https://www.instagram.com/p/BnXdSraDIBo/?utm_source=ig_tumblr_share&igshid=4hwwmkgudbah

[tallowren]

I'm currently in the process of moving, so I can't work on my gunpla, and therefore can't post much here. So instead I will post some old pictures of my second ever kitbash, first finished custom, and first attempt at something way beyond my skill level at the time. I used spare parts from the Gastima, Gaeon, Hyakuren and Hyakuri to make a gunpla Tauburn from Star Driver over a few months. #gunpla #gundam #plamo #plamodel #customgunpla #gunplawip #kitbash #sandiegogunpla

[tallowren]

So, I messed up and didn't link my pictures properly when I submitted my #gunplabuildersassociation Cannon Fodder entry, so they only got the first image in the Google Drive folder, the "proof of straight-build" picture. However, the contest organizers must have missed my submission, because my entry never showed up in the full album until a few days ago (and even then it was the "proof of straight-build" picture). By then it was too late, the contest was over. And they never contacted me about the whole issue, probably because it was way too late and they were busy managing the rest of the contest. My entry just slipped through the cracks. But, unlike the image above suggests, I'm not mad. I'm sad I missed my chance to show off my completed kit. Nothing against the contest organizers, I'm sure they did their best. I'm still satisfied with what I was able to accomplish in 3 months for my second ever contest, even if it didn't turn out exactly the way I intended. I learned a lot along the way, and intend to use that experience to make my next build better, and the one after that, and the one after that. Thanks for reading this really long message, and I hope my lack of salt inspires you in some way. #gunpla #gundam #plamo #plamodel #customgunpla #sandiegogunpla

[tallowren]

My next project, which is actually an old project. Keeping to my loose theme of using the least kits possible per custom, I'm making an AGE-1 Samus, with the idea being I'm making a mobile suit in the image of Varia Suit Samus as opposed to "actually making Samus", arm cannon and all. #gunpla #gundam #plamo #plamodel #customgunpla #gunplawip #kitbash #gundam age #samus #metroid #sandiegogunpla 

[tallowren]

Overflag - Stealth Fighter Made for the #gunplabuildersassociation Cannon Fodder contest Now that the contest is over, I can post about my completed build. The inspiration came from stealth jet fighters; I looked at modern planes to see what their design philosophy was, and tried to emulate that as best I could on the Overflag. The results were mixed. The Flag's base design is that of a transforming plane, so a lot of real world plane design doesn't fit well. (The tail fins being on the legs, the front of the jet mode being a detachable gun, etc.) Additionally I didn't think alot of the execution out, so some of my ideas came out looking half-complete (the top of the gun and the sides of the wrists). But overall I glad I was able to finish on time, and it was my first time top coating, so I'm glad that turned out well. Technically, since I haven't yet finished my Anubaze, this is my first finished build. As for my next build, I'll be returning to an old build I've been planning for at least several years and I finally have the tools and skills to make it happen. More that later. #gunpla #gundam #plamo #plamodel #customgunpla #gunplawip #kitbash #gundam00 #overflag #sandiegogunpla 

[tallowren]

Something like that. Next up is adding two slanted plane tails to the feet. #gunplabuildersassociation contest due in three weeks. #gunpla #gundam #plamo #plamodel #customgunpla #gunplawip #gundam00 #overflag #sandiegogunpla

[tallowren]

Of the two customs I've built so far, my greatest construction challenge that I've made for myself is the creation of 3D shapes out of plaplate. This time, it's 3D triangular prisms with a small gap at the top to allow the wings to still move. #gunpla #gundam #plamo #plamodel #customgunpla #gunplawip #scratchbuild #gundam00 #overflag #sandiegogunpla

[tallowren]

*makes airplane noises* My base kit for the @gunplabuildersassociation build contest. My current plan is to customize it into some sort of stealth fighter, so I'm reading up (mostly Wikipedia) on existing stealth fighters to find what about their design makes them so stealthy. I want to make sure it looks good both in both transformation modes. The Anubaze is on the backburner for now, since the contest has an actual deadline, but I'll likely keep Pledge gloss coating it in the meantime. #gunpla #gundam #plamo #plamodel #gunplawip #gundam00 #overflag #sandiegogunpla

[tallowren]

EB-068r Anubaze Because the Graze Ritter is EB-06r and the Reginlaze is EB-08. #gunpla #gundam #plamo #plamodel #customgunpla #gunplawip #kitbash #ibo #ironbloodedorphans #graze #reginlaze #sandiegogunpla

[tallowren]

I return for the new year. Before I left for the holidays I had been topcoating pieces with Pledge Floor Care Finish. I left them to dry, and then today I returned to test fit them. Here's a picture of how the colors turned out with the Pledge topcoat. I'm still experimenting with how many layers of Pledge I need to brush on, and I need to fix the paint layer because I only noticed some mistakes after topcoating but it's my first time doing anything like this so I'm learning! #gunpla #gundam #plamo #plamodel #customgunpla #gunplawip #kitbash #ibo #ironbloodedorphans #graze #reginlaze #sandiegogunpla

[tallowren]

If you found this blog in the before-time, that blog has been reincarnated as this blog. Please join me as I try to build a name for myself.