tplinkdevice3713-blog

[tplinkdevice3713-blog]

Configurations for Linksys

Setting up and configuring a Wireless or any type of network is a very frustrating task especially when you are a layman. There are a couple of things that you need to be done in order to successfully setup and configuration. Are you thinking the same? Well, you are not the only one who is facing a problem, many others Linksys user facing the problem. In reality, setup and configuration process is very simple and faster. You can follow the step by step guide to know how you can easily configure the Linksys Wi-Fi. Here in this article, we are going to talk about Linksys extender setup ac1200 re6700 and how to configure it without facing any problem.

How to the configuration for Linksys?

Step 1: Firstly, connect the Linksys Wi-Fi router to the computer and plug it into the power source.

Step 2: Open a web browser on your computer and log on to http 192.168.1.1 and hit on the “Enter” button.

Step 3: Once you to log on to the address, you will direct to the Linksys web-based online dashboard.  Here, first, you have type the username and the password and hit on the “Enter” button or simply click on the “ok”.

Step 4: Web-based interface will appear, you have to click on the “Setup” tab.

Step 5: Under the Setup tab, click on the “Mac Address clone” below the Access Restrictions tab.

Step 6:You have to click on the “Enabled” radio button and hit on the “Clone My PC’s Mac.

Step 7: Click on the “Save Settings” to apply changes that you have made.

If you want to know how to configure the Linksys extender setup ac1200 re6700 then, this article is dedicated to you. These steps are very easy to understand and implement.

[tplinkdevice3713-blog]

FastLane Technology for WiFi Extenders

The internet surfing mode or normal operating mode of the Wi-Fi extender allows the devices on the bands 2.4 GHz and 5 GHz to connect to the internet.  

To enable the Fast Lane Technology, you have to select any of the two options.

•             In this step, you can use the 5 GHz band so as to connect the extender to the Wi-Fi devices and the 2.4 GHz band so as to connect the extender to the Wi-Fi router.  You have to use this mode if the devices that you want to use support the 5 GHz band.  This settings allows you to play the game online and video streaming.

•             You can also use the 5 GHz band to connect the extender to your Wi-Fi router and 2.4 GHz to connect your extender to the Wi-Fi devices.  You can use this mode if your router supports the 5 GHz band settings.

 The following are the steps to enable the Fast Lane Technology

•             First of all, open the web browser on your computer and type the web address www.mywifiext.net in the address bar menu or search for http www routerlogin net and then press enter.

•             This will redirect you to a page where you have to enter your username and password, the default username is admin and the default password is “password”.

•             Then the Internet Surfing radio button is selected by default.  After that, you have to go to the Fast Lane Technology.

•             In the next step, you have to select one of the two given options under the Fast Lane Technology.

You can either select the “Device-to -extender in 5GHz and extender-to-router in 2.4 GHz only”.  For this setting, your device must have to support the 5 GHz band.

Another option is the “Device-to-extender in 2.4 GHz only and extender-to-router in 5 GHz only.  Then click apply and your setting will be saved.

[tplinkdevice3713-blog]

Amped Wireless TITAN-EX device

Hey guys what’s up! From my couple of days of research, I have found that many of you are looking for the features of Amped Wireless TITAN-EX device. Still now if you are looking for the same thing then you are at the right post. Because in this article we are going to discuss each and everything Amped Wireless TITAN-EX device as well as amped wireless range extender setup.

Features of  Amped Wireless TITAN-EX device

•    With the help of this device, you will be able to Extend the range of any Wi-Fi router for up to 14,000 sq.

•    Amped Wireless TITAN-EX device has 14 powerful amplifiers as well as 4 high gain antennas, which means it has the capacity of High Power Wi-Fi for ultimate coverage.

•    You can play online games without lag and can stream HD and 4K media to multiple devices at once without any buffering.

•    Amped Wireless TITAN-EX device has Blazing-fast AC1900 which can deliver Wi-Fi speeds  up to 2.4GHz 600Mbps + 5GHz 1300Mbps

•    It can also share a file with a USB 3.0 and a USB 2.0 port as well as 5 Gigabit ports for network devices.

•    It can work with any router as well as any service provider gateways.

How to setup amped wireless range extender.

•    At first, connect your amped wireless range extender with your computer, then plugin your extender into power cable. After that turn on your wireless range extender.

•    Now open any of the web browsers on to your computer, then on the address bar of the web browser enter your router default IP address. Then press enter.

•    Now a new login page of the router will open where you have to enter your router default username and password.

•    Once you enter correct username and password you will be login, after login goes to advance section then go to setup, from there you can set up amped wireless range extender.

[tplinkdevice3713-blog]

Now you have to access the amped wireless dashboard. For accessing at first you have open any of the web browsers on your computer then on the address bar enter your router default Ip address.  After doing all of the above settings, at last, you have to connect your computer to the new Extended Network.

[tplinkdevice3713-blog]

The router comes with ready firmware that allow you to control and extender your network, Linux-based firmware can also be modified to provide additional customization. The router can be transformed into a commercial-grade wireless device featuring enterprise-level functionality with least effort and cost.

[tplinkdevice3713-blog]

Set Up Amped Wireless REC10 Wifi Range Extender

Hey guys what’s up! IT is the query among many of you that how to Set Up Amped Wireless REC10 Wifi Range Extender. And if you are looking for the same thing then you are at the right post. Because in this article we are going to discuss how you can Set Up amped wireless dashboard REC10 Wifi Range Extender. Below is the way.

Set up amped wireless dashboard REC10 wi-fi range extender.

•    At first, you have to connect the RCE10 to the power outlet. Now on your Wi-fi list, you will find Amped_REC10 now click to connect.

•    Now you have to access the amped wireless dashboard. For accessing at first you have open any of the web browsers on your computer then on the address bar enter your router default Ip address.

•    Now you have to set up the Extended network. For set up, at first, you have to select the network which you want to extend. (70% or more the signal strength must be).

•    After doing all of the above settings, at last, you have to connect your computer to the new Extended Network.

In this above way, you will be able to Set Up Amped Wireless REC10 Wifi Range Extender.

Conclusion

I hope that our service has pleased you still now if you have a query relating to this article then comment down below in the comment section. We will try to reach your problem as soon as possible. And if you have like this article then share this article. Help other also to Set Up Amped Wireless REC10 Wifi Range Extender. Do follow us for more latest update related to the router.

Thank you!

[tplinkdevice3713-blog]

The packaging of the shampoo is very impressive. The shampoo comes in a brown colored plastic bottle with a pump dispenser at the top. The cap of the bottle is also equipped with a lock mechanism, which you cantwist in order to avoid leakage.

[tplinkdevice3713-blog]

you have used “INTERET DAY” giving as name of the instruction and then chosen “Mon”, “Wed” and “Fri” as the scheduled days we actually wish to the Netgear booster setup Wireless Connection to be accessible. Obviously you can then; choose other days or just choose “All Week” Finally, you have chosen the time format that appears as in “24 hour” and specified a “Start Time” as 06:00 unless the “End Time” of 22:00.

[tplinkdevice3713-blog]

Go to scan to open upgetting the entire accessible network to spread. Choose the network that you just wish to expand. You need to be surethat the signal powermust be superiorto 70%. If it is very slower, you must find next other location for the REC10 which is amongst your wireless router and numbregion. Type the security key for your present network and go to Next. Type the network ID and security key for your protracted network. You will then just click on Clone Settings to make use of the similar security key and also same Network ID.

[tplinkdevice3713-blog]

When the router is not connecting to the internet, there could be a problem related to connection or power cycle. First, you should try to check connection and make sure that router is properly connected to the modem and your computer. If you don’t know how to do power cycle or anything about router and modem then there is a website called as http www routerlogin net, by visiting this website you can know all about routers, modems, ex panders and connectivity things.

[tplinkdevice3713-blog]

When you need to change the wifi access password for your device, you will need to access Amped wireless login page. If you are having default login password and user name for your device then you must change these login details as soon as possible.

[tplinkdevice3713-blog]

When you need to change the wifi access password for your device, you will need to access Amped wireless login page. If you are having default login password and user name for your device then you must change these login details as soon as possible.

[tplinkdevice3713-blog]

Linksys cloud account for Ping test

To trace the communication in between the computer or the router to any websites or devices connected in the network, we take the help of Ping test. Sometime you might need to troubleshoot the connectivity issue. There also Ping test is useful to troubleshoot issues and this Ping test can even be done for measuring response time for any request.

You can even take the help of router's admin page to solve some network issues, 192.168 1.1 admin admin        can guide you for such steps.

Here in this article we will discuss the steps involved to carry out a Ping test on your Linksys cloud account.

Steps for Linksys cloud account for Ping test

Step 1:

Open a web browser and access your Linksys cloud account by visiting the cloud link and providing required credentials.

Step 2:

Now you can see the navigation pane under Router Settings. Click over Troubleshooting in that pane.

Step 3:

It will open a screen with some tabs, Click the Diagnostics tab. From here you can easily diagnose the issues and get required suggestion.

Step 4:

Now under this diagnoses section enter the IP address or host name of the website or you can even enter the devices that you want to test. And then select the desired Number to ping.  Then click on the start to Ping button. This will start the ping process.

NOTE:  The provided option 'Number to ping' is the number of times you want your computer to seek out replies from the provided website or specified device. It's default value is set to 5, but you can change it as per your requirement.

To check the stability or to perform the load testing, this number can be increased.

Ping test Result

Once the above process is complete, a window in popup with the result of Ping request.

·         If the number of sent packet and received are same, then it is working fine.

·         In case of failure you may see message like Destination Host unreachable or Request Timed Out.

[tplinkdevice3713-blog]

Internet is a worldwide network of billions of computers and other electronic devices. It is connected to the entire world. Assuming current personal and professional environment without internet is totally impossible. Internet is a lifeline for today’s world. It was firstly started with the name of “ARPANET” in 1960’s. Since 1993, the internet has the largest growth and is not accessible to the rest of the world.

[tplinkdevice3713-blog]

NBN network introductions for Netgear wifi router device

The NBN network is National Broadband Network which is a national wholesale open access data network project of Australia which includes wired as well as radio communication components in it. The internet service providers have a contract with National Broadband Network and they sell fixed internet access to the customers or users. You can use any router to get the benefits of this network. Most people use Netgear Wi-Fi routers to get the maximum speed of the network but some of the people face issue with router Netgear login, so in this article, we will learn to set up your Netgear router.

For installing a Netgear router you need an internet connection, modem, Ethernet cable, any device from laptop, computer, mobile to open a browser on it and you should know your internet connection type like DHCP, Static IP, PPPoE etc and if you don’t know then you can ask your internet service provider. Once you have all these things, follow the steps to install the Netgear wireless router to know about router Netgear login of your Netgear router device:

1.       You need to connect the modem with your Netgear router first using an Ethernet cable and make sure that you connect Ethernet from modem WAN port to router yellow port.

2.       Connect your computer using an extra Ethernet cable from the first LAN port of the router.

3.       Now, restart all the devices like router, modem, and computer or laptop.

4.       Once rebooted, open a browser and type 192.168.0.1 in the address bar and press enter.

5.       It will now ask you for Username and password, so use admin as username and password as the password.

6.       After logging in, go to setup wizard and detect your internet connection type and click yes and then click on next option. After this, your Netgear router will automatically detect your Internet connection and begin the setting of your router.

[tplinkdevice3713-blog]

If you need to manage the DSL modem settings for your tplink wifi router device then these settings and configurations are totally easy for the devices. ( tplinklogin.net )  You can easily manage the DSL configurations for your device only if you can manage the tplink login net access for your device. In this article we are explaining the steps for having the DSL modem settings for your tplink devices. Here are the Complete Steps that you can Follow

[tplinkdevice3713-blog]

No WiFi Connections for Netgear Devices

If you are using Netgear wifi router devices and there are no wifi connections then you will need to make a review for the settings of your Netgear devices. There are some simple steps that will resolve your wifi issues that you are getting with Netgear router and wifi extender devices. In this article we will explain the tricks that will help you for sure.

You can access Netgear signin window and there you can check the channel settings for your router device. From the configuration window you can easily change the channel settings for your Netgear wifi router devices.

You will also need to change the wireless devices that are connected to your network. If you have attached many wireless devices like mobile devices and laptop devices to your Netgear wifi router devices then you will need to remove some devices from network. If you want to attach more than 10 wireless devices with your Netgear device then you will need to attach Netgear wifi extender device to your Netgear devices.

When there some kind of update issues for your Netgear wifi router devices then you will need to update your Netgear firmware as soon as possible. If you want to update firmware for your device then you can access Netgear routerlogin.net web address and then you can update your Netgear wifi router and wifi extender devices.