wecivilengineers
wecivilengineers
We Civil Engineers
298 posts
 Civil Engineer, You-Tuber, Blogger Love to Read & share Knowledge.  
Don't wanna be here? Send us removal request.
wecivilengineers · 5 years ago
Text
HOW TO CALCULATE BRICKS, CEMENT, AND SAND QUANTITY IN 9" BRICK WALL
HOW TO CALCULATE BRICKS, CEMENT, AND SAND QUANTITY IN 9" BRICK WALL
Quantity of Bricks:-
Assuming:-
•Brick size = 9”x4.5”x3”  •Thickness of wall = 9” •Thickness of mortar = 0.39” •Brick size with mortar= (9+0.39)x(4.5+0.39)x(3+0.39) = 9.39”x4.89”x3.39” •
             No. of bricks = Volume of Brickwork/ Volume of 1 Brick with mortar
Volume of 1 Brick = (9/12)x(4.5/12)x(3/12)= 0.75’x0.375’x0.25’ = 0.070 CFT
Volume of 1 Brick with mortar =…
View On WordPress
0 notes
wecivilengineers · 5 years ago
Text
4.5 inch wall BRICK CALCULATIONS
4.5 inch wall BRICK CALCULATIONS
Assuming:-
Brick size = 9”x4.5”x3”
Thickness of mortar = 0.39”
Brick size with mortar= (9+0.39)x(4.5+0.39)x(3+0.39)
                                            =9.39”x4.89”x3.39”
Thickness of wall = 4.5”
  No. of bricks = Volume of brickwork/ Volume of 1 brick with mortar
Volume of 1 Brick = (9/12)x(4.5/12)x(3/12)=0.75’x0.375’x0.25’ = 0.070 CFT
Volume of 1 Brick with…
View On WordPress
0 notes
wecivilengineers · 6 years ago
Text
Difference between dowel bars and tie bars
Difference between dowel bars and tie bars
Dowel bars
Dowel bars are placed at the transverse joints of concrete pavement and they take part in partial wheel load transfer from one slab to its adjacent slab. The dowel bars also allow axial thermal expansion and contraction of the concrete slab along the axis of the dowel.
Tumblr media
Tie bars
Tie bars are deformed rebars or connectors used for holding faces of rigid slabs in contact to maintain…
View On WordPress
0 notes
wecivilengineers · 6 years ago
Text
Bulking of Sand Test
Bulking of Sand Test
What is bulking of sand?
Bulking of sand means increase in it’s volume due to presence of surface moisture . The volume increases with increase in moisture content . The volume may increase up to 20 to 40% when moisture content is 5 to 10 %.
As fine grained sands have higher voids than medium and coarse grained sands, the percentage of moisture absorbed and the percentage volume increase is the…
View On WordPress
0 notes
wecivilengineers · 6 years ago
Text
River Sand vs Manufactured Sand
River Sand vs Manufactured Sand
The natural river sand was the cheapest resources of sand. However the excessive mining of rive bed to meet the increasing demand for sand in construction industry has lead to the ecological imbalance in the state. Now the sand available in the riverbed is very coarse and contains very high percentage of silt and clay. The silt and the clay presence in the sand reduce the strength of the concrete…
View On WordPress
0 notes
wecivilengineers · 6 years ago
Text
Manufactured Sand (M-Sand) in Construction | Advantages & Disadvantages
Manufactured Sand (M-Sand) in Construction | Advantages & Disadvantages
M-sand is “crushed aggregates produced from hard granite stone which is cubically shaped with grounded edges, washed and graded with consistency to be used as a substitute of river sand”.
Advantages of M sand
Greater Durability M-Sand has balanced physical and chemical properties that can withstand any aggressive environmental and climatic conditions as it has enhanced durability, greater strength…
View On WordPress
0 notes
wecivilengineers · 6 years ago
Text
Silt Content Test of Sand (Fine Aggregates)
Silt Content Test of Sand (Fine Aggregates)
AIM
To find-out the silt content in sand (fine aggregates)
Apparatus Measuring cylinder
Measuring cylinder – 250ml
Sand  – Specimen
Water
Salt Solution
Procedure
The measuring cylinder should be free from moisture and dry.
Fill the water up to 50 ml with 1% salt solution.
Then add sand to it until the level reaches 100 ml. 
Again add salt solution up to the level of 150 ml.
Close the mouth of…
View On WordPress
0 notes
wecivilengineers · 6 years ago
Text
Why we can't use sea sand in building construction?
Why we can’t use sea sand in building construction?
We do not use use sea sand in construction due to following reasons
Sea sand  tends to very fine and rounded, Smooth rounded particles would offer less resistance to rearrangement than angular or elongated particles with rough surfaces.
Tumblr media
In sea water, chloride is present which will cause corrosion of steel and iron which ultimately leads to reducing carrying capacity of steel and iron, so that the…
View On WordPress
0 notes
wecivilengineers · 6 years ago
Text
Can desert sand be used in construction ?
Can desert sand be used in construction ?
Answer is both Yes and No.
let’s see  we should not use desert sand in construction?
Desert sand grains are finer and smoother so their surface chemistry would not be able to offer sufficient number of multi-directional chemical linkages. If their grain size is too small, the slurry slip and the concrete would have poor strength. Desert sands possess an open structure, and there is little…
View On WordPress
0 notes
wecivilengineers · 6 years ago
Text
What is tie bar in civil engineering
What is tie bar in civil engineering
Tie bars
Tie bars are deformed rebars or connectors used for holding faces of rigid slabs in contact to maintain aggregate interlock. Tie bars are not load transferring device. For instance, tie bars are used in longitudinal joints at mid depth of concrete pavement. Generally it is made of epoxy coated steel. 
Advantages of using Tie bars in pavement:-
It prevents the lanes from separation 
To…
View On WordPress
0 notes
wecivilengineers · 6 years ago
Text
What is a dowel bar? | Purpose & Advantages.
What is a dowel bar? | Purpose & Advantages.
Dowel bars are placed at the transverse joints of concrete pavement and they take part in partial wheel load transfer from one slab to its adjacent slab. The dowel bars also allow axial thermal expansion and contraction of the concrete slab along the axis of the dowel.
Half of the length of this bar is embedded in one of the concrete slabs and the remaining portion is bonded in the other adjacent…
View On WordPress
0 notes
wecivilengineers · 6 years ago
Text
Diamond Drilling Tool: The Best Drilling And Cutting Solution Your Project Needs
Diamond Drilling Tool: The Best Drilling And Cutting Solution Your Project Needs
This planet is blessed with the diamonds which is the hardest substance. This material is versatile and used in a variety of activities and not only restricted to jewellery, like concrete cutting activities on the construction sites.
While there are a lot of traditional methods that have been used to cut the concrete or another type of building structure, diamond drilling tools are considered…
View On WordPress
0 notes
wecivilengineers · 6 years ago
Text
Creating a Water Savings Plan For the Household
Creating a Water Savings Plan For the Household
    Creating a waters savings plan for the household is an important component of any plan to live in a way that creates the smallest carbon footprint. But in Australia, it serves another purpose, which is to reduce water consumption in a country beleaguered by short periods of torrential rains and long periods of no rain.
When you read the research material, it is clear that some people are…
View On WordPress
0 notes
wecivilengineers · 6 years ago
Text
Why Steels are Bind by Binding Wire?
Why Steels are Bind by Binding Wire?
One of the major use of binding wires is to keep the reinforcement provided in proper place because without the binding wire reinforcement will be free to move which could lead to increase in spacing between reinforcement in a particular section and decrease in a particular section which can lead to the decrease in strength and ductility of the structure and increase the chances of failure.
Pu…
View On WordPress
0 notes
wecivilengineers · 6 years ago
Text
Tips to Construct your Own Metal Workshops
Tips to Construct your Own Metal Workshops
Break down the job into smaller jobs and work through every with deliberation. Starting with creating a funding by installing the utilities, then here is the way to construct your own metal workshop. Whether you’re a hobbyist or a artisan that needs more room, a metal workshopwould be the ticket to a fantastic work-space that’s designed especially for you. Building your workshop can be…
View On WordPress
0 notes
wecivilengineers · 6 years ago
Text
What is the difference between Concrete and Screed
What is the difference between Concrete and Screed
Both screed and concrete are normally used in construction industry and formed of same basic ingredients like water, cement, and aggregates. While both are used in construction purpose but  what makes them different is  the size of aggregates, the cement grade, mix consistency, and of course their intended application or use.
Due to the presence of coarse aggregates in concrete, its texture is…
View On WordPress
0 notes
wecivilengineers · 6 years ago
Text
MICRO CONCRETE
Micro Concrete, otherwise known as Micro Cement, is a popular design product for those who want to create a concrete aesthetic where it would not normally be possible.
What is Micro Concrete
Micro Concrete is a cement based coating which can be applied thinly (approximately 2-3mm) to a range of different surfaces to provide the look and feel of concrete at a fraction of the cost and weight of…
View On WordPress
0 notes