geekycaticorn

[geekycaticorn]

A much overdue update!

A much overdue update!

First off, let me apologize for being so inactive for the last 5 months or so, there’s been a lot of personal and family stuff has been going on, sadly, most of it not good. I won’t go into specifics, but, hopefully things are going to start turning around for the better!

I have still been doing shows, and have 1more left for the year! The beginning of the year is shaping up to be another busy…

[geekycaticorn]

I've finally re-emerged from under my rock! 😅😅

I’ve finally re-emerged from under my rock! 😅😅

Hello all! It’s been a few months, I know and I’m so sorry 😢😢 It’s been a very hectic year and things have just slowed down. I’m basically taking the summer “off”, to concentrate on new products and getting my Etsy shop updated, so that it can actually reflect what I sell at cons, instead of a few decoden phone cases and some supplies. 😞😞😞

My goal is to open sometime in June, no later than the…

[geekycaticorn]

Sneak peak at Mimi's twin sister Misha! Mimi will be getting a little makeover as well. Can't wait for the super talented @corpse.cutie to have time to complete her! So excited!!!!! 💖💖💖💖 #geekycaticorn #preview #sneakpeek #newmascot #corpsecutie

[geekycaticorn]

What an awesome 1st day at Sakura con today! Thank you so much to everyone who stopped by! Looking forward to day 2! If you couldn't find me today, I'm in the vendor's hall booth 721! #geekycaticorn #sakuracon

[geekycaticorn]

Looking forward to seeing everyone this weekend! Make sure you stop by booth 721 im the exhibitors hall and say hello! I'll have magical squad prInts available along with enamel pin preorders!!! Hope to see you all there!!! 💖💖💖 #geekycaticorn #sakuracon #vendorshall

[geekycaticorn]

I don't think anything more needs to be said 😉😉 #geekycaticorn #twitchstreamer #twitch #livestream #crafting

[geekycaticorn]

Good news!!! I will have prints and postcards available soon for these! Postcards will go up in my etsy shop when I get them. I'm debating on weather or not I want to do these as charms & stickers, so get your vote in & help me decide!!!!! These were a collaboration with @corpse.cutie . I came up with the initial design & did the coloring & Corpse Cutie did the linework (since I still REALLY suck at it) #geekycaticorn #magicalboy #magicalgirl #sneakpeak #newmerch #prints #collaboration

[geekycaticorn]

New buttons! They will be available for the first time, this weekend at Oregon Coast Comic con! Stay tuned for another exciting update on enamel pins in the next couple of days!!!! #geekycaticorn #gamer #buttons #gamergirl

[geekycaticorn]

YAY!!!! I finally got it to work! Increasing the internet speed has seemed to work. Now we'll just see how well it works when the hubby is watching his YouTube stuff. I'm just doing a little resin tonight.

[geekycaticorn]

Any help would be greatly appreciated! So, I already know that I need to up my internet speed (I've only got 30 Mbps right now😳😳), what I need to know is, what is the lowest speed I can get away with, with out all the buffering. I'm increasing it to 50Mbps, for now, because anything more than that will require a new box and the earliest they can install it, is 3/23. My provider says I should go with 150 Mbps, but I know they always wamt to sell you the more expensive option. I would like to go with 75 Mbps, and be successful, but I'm assuming I'm going to have to at least go with 100 Mbps. I don't know if the streaming platform matters, but it will be on Twitch. And the only other things that might be going on while I'm streaming, is my husband may be on YouTube & my daughter will either be using Netflix or looking up memes. Otherwise, it's most likely I will be the only one using the internet. So far, everyone I've asked has Comcast, or is like me & has no clue lol. Any help would be greatly appreciated!!! Thank you! #livestream #twitch #questions #advice #fios #internetspeed #livestreaming

[geekycaticorn]

I can't believe I forgot about that! If you're interested in some yarn, resin pieces beads & a some resin molds, make sure you check out the sale! 😁😁 #Repost @geekycaticornsales (@get_repost) ・・・ I totally forgot about Daylight Saving time, so sorry about that! 😔😔😔 Sale will be starting in about 30 minutes, at Noon PST. Items will be up for a week, & will be cross posted after I finish posting, so you all will have first pick on all the goods!

[geekycaticorn]

OMG!!! I'm gonna brave it again! Gonna start probably around 7:30 pm PST, since I gots to eat & clean up a little bit, so I can work do some resin! 😅😅😅 Maybe even a little decoden! I also need to heat up my little work room so it's not so cold in there 😋😋 So, please forgive me for being a #twitch n00b! This will be my first time using my new webcam, & hopefully the Mic on it will pick up enough. If not & you're watching, please let me know, so I can get my hubby to get me a Mic 😶😶😶 & if you can recommend a Mic that will work with my Surface Pro 2, that would be super awesome! #geekycaticorn #livestream #twitch #forrealthistime

[geekycaticorn]

Happy Saturday all! I just wanted to let you all know, that I will be having a sale on my other page tomorrow, @geekycaticornsales. It will be mostly a destash sale, but there will be some new stuff too. I will also be selling decoden whip! I have to finalize the math tonight, but it looks like it will be about $6.50 for 4 oz. I will post a video of the batch I made before leaving for ECCC, which is still soft BTW! 😄😄 So, yea, if you would like to participate in the sale, please go give the other page a follow & I even have a tag list if you'd like to be tagged when it starts. I'm not sure exactly what time, but late morning/early afternoon, after hubby goes to work.

[geekycaticorn]

And I'm already for day 3! Had to add an extra tier, now that my bats are done. It's been an awesome weekend so far. Thanks to everyone who's stopped by this weekend!

[geekycaticorn]

Was pretty hectic with set up & con yesterday forgot to post this. Here is my booth for #eccc! HG205, was an amazing first day & not as overwhelming as I thought it would be. Thanks to all those who stopped by!!!! #artistalleysetup #artistalley

[geekycaticorn]

So not ready for this!!! Lol but still looking forward to an awesome weekend! #geekycaticorn #eccc #emeraldcitycimiccon

[geekycaticorn]

Another custom order placed through my Etsy, a Spideypool romance themed case! This was a lot if fun to make, all but 2 of the pieces were made by me. I love it when I get to make pieces for phone cases! #geekycaticorn #samsung #galaxys5 #decoden #decodenphonecase #customcase #spiderman #deadpool #spideypool #cute #creepy