#CoreMarking

[gauntghoul]

bro im at the rocklin store and tryin to fix the office cuz its makin me feel evil but theres sooo much backstock. like ik u guys arent selling this much and its all so Everywhere

[wreckerscientist]

Coremark

[dondadon8]

UBTECH UGOT kit-AI Space Exploration version - ROBOSTEAM

https://robosteam.ro/product/ubtech-ugot-kit-ai-space-exploration-version/

Arduino GIGO R1 WIFI is the moat powerfull Arduino board ever, the GIGA R1 is based on the same microcontroller as thr Portenta H7, the STM32H747. The Arduino I/O pin can handle 40ma as an absolute maximum without damage to the Arduino. The STM32H7x7 lines combine the performance of the Cortex-M7 (with double-precision floating point unit) running up to 480 MHz and the Cortex-M4 core (with single-precision floating point unit)

- PERFORMANCE

480 MHz fCPU on the Cortex-M7, 240 MHz on the Cortex-M4, 3224 CoreMark / 1327 DMIPS executing from Flash memory with 0-wait states thanks to its L1 cache

L1 cache (16 Kbytes of I-cache +16 Kbytes of D-cache) boosting execution performance from external memories

- Security

Crypto/hash hardware acceleration, secure Firmware Install (SFI) embedded, security services to authenticate protect your software IPs while performing initial programming

Secure Boot Secure Firmware Update (SBSFU)

Power efficiency multi-power domain architecture enables different power domains to be set low-power mode to optimize the power efficiency. Embedded SMPS to scale down the supply voltage, supply external circuitry , combined with the LDO for specific use cases. USB regulator to supply the embedded physical layer (PHY).

145 µ/MHz typical @VDD = 3.3 V and 25 °C in Run mode (peripherals off) and SMPS

2.43 µA typical in Standby mode (low-power mode)

460 nA typical in VBAT mode with RTC (low-power mode)

- Graphics

LCD-TFT controller interface with dual-layer support MIPI-DSI interface for driving the DSI display Chrom‑ART Accelerator™. boosts graphical content creation while saving core processing power, thus freeing up the MCU for other application needs JPEG hardware accelerator for fast JPEG encoding and decoding, off-loading the CPU

- Embedded peripherals

Up to 35 communication interfaces including FD-CAN, USB 2.0 high-speed/full-speed. Ethernet MAC, Camera interface

Easily extendable memory range using the flexible memory controller with a 32-bit parallel interface, or the Dual-mode Quad-SPI serial Flash memory interface.

Analog: 12-bit DACs, fast 16-bit ADCs

Multiple 16- and 32-bit timers running at up to 480 MHz on the 16-bit high-resolution timer

[happyjoyisfree]

Check out this listing I just added to my Poshmark closet: Core Mark Tie Lapel Pin Anniversary Commemorative, Gold Vermeil & 2mm Diamond.

[govindhtech]

Launching the Simics Simulator with RISC-V Platform

The amount of processor cores, active instruction set extensions, memory capacity, virtual disk size and content, Ethernet network address, and other configuration options can all be changed on hardware. The platform employs virtio devices for networking, drives, and entropy (instead of devices from some particular real-world RISC-V-based system-on-chip (SoC)) to simplify program support. Practically speaking, it feels and appears like a little embedded device, despite the fact that it may be configured with many gigabytes of disk and RAM.

Both Linux and bare-metal software can be executed on the platform. Buildroot is used to build the standard software stack for Linux. Creating a bootloader, Linux kernel, and bootable file-system image for the RISC-V virtual platform is a pretty simple task when you use Buildroot.

Connecting the Virtual Platform RISC-V

Enabling networking was a fairly intriguing use case throughout the platform’s development. It wasn’t difficult to get networking to function at the point where machines could “ping” one another. It required some effort to enable remote login from one computer to another.

Telnet would have been used to accomplish this in the past. There is minimal configuration required, and the protocol, client, and server are all straightforward. But the networking world isn’t what it used to be, and almost every Linux distribution demands that secure shell (SSH) be used for any form of remote login. It only takes a few lines of setup to add SSH to Buildroot, then rebuild.

SSH, however, is a more intricate creature. After adding SSH to the root filesystem, the target machine would not start up and would hang right before the login prompt appeared. The absence of unpredictability was the issue. SSH requires a source of randomness in order to produce a host key when it is first installed. The random pool was filling up very slowly since the Linux kernel could not find many sources of randomness to use on the very basic virtual platform. stopping the boot’s advancement. Nice example of “oh, I didn’t realize that might be an issue.”

Intel enhanced the target system by adding a “Virtio entropy” device. This gives the target system a high-bandwidth source of randomness. To assure simulation repeatability, it is implemented in the simulator using a deterministic pseudorandom system, even if it appears to the target system to be a hardware random-number generator (RNG). The variation is undetectable to the target software.

This is a straightforward simulated network architecture that makes use of several RISC-V virtual platforms, each with a unique hardware arrangement. It should be noted that the virtual network also has a “service node” that offers standard services like DHCP for system configuration and a dependable target for ping to check network connectivity.

SSH is being used by the “small” machine to connect to the “medium” machine. To display the memory size, the “medium” and “large” machines are both operating at the top. In order to show the simulation of a multicore target system, they are also running a few copies of the single-threaded coremark benchmark. A list of the simulated machines and every processor core in the active simulation is displayed by the Simics simulator command line.

The target machines differ in terms of clock frequencies, memory sizes, and core counts, as can be seen from the Simics command-line interaction in the terminal.

Because each RISC-V target is housed in a separate Simics simulator cell, the simulation can run three machines concurrently, which speeds up the simulation. Additionally, each machine has the option to activate parallel simulation, which might result in the creation of two + four plus eight, or 14-way parallelism in this instance. Workloads involving a lot of computation benefit greatly from this acceleration.

Using the Quick Start Platform for networking

Heterogeneous mixed-architecture simulations can be conducted since the Intel Simics Simulator Public Release includes the Intel Architecture-based Quick-Start Platform (QSP). Combining the two targets into a single network within a single Simics simulation operation is a basic example. similar to this

The service node’s Network Address Translation (NAT) feature allows any virtual network to be connected to the outside world. The screenshot below shows the host system (this time running Microsoft Windows for variety’s sake) logging into the RISC-V target system via inbound port forwarding with an SSH client. Additionally, two SSH connections are open due to an SSH login from the QSP target system to the RISC-V target system..

All that is required to set this up is a short amount of top-level scripting over the virtual platform scripts that are already in place. Initially, default parameter values that deviate from the targets’ standard values are set up using a YAML file. Keep in mind that the exact names of the parameters and the parameter hierarchy may vary because this is based on early drops of the targets.

Second, the YAML file calls a Simics simulator command-line script, which uses pre-existing setup scripts to produce the separate setup components in order to build the network and target systems.

Read more on Govindhtech.com

[forlinx]

RISC-V: An open, Flexible, and Innovative Processor Architecture Leading the Future

As technology develops rapidly, smart devices play an increasingly important role in our lives. Have you ever wondered why your smartphone, computer, and other smart devices can run various complex software and applications? This is all thanks to the powerful processor architecture. Today, we will take you into an eagerly anticipated processor architecture - RISC-V.

RISC-V originated from the University of California, Berkeley, and was created by a group of researchers including Andrew Waterman, Krste Asanović, and Yunsup Lee. Their vision is to break the closed design pattern of computer processors and provide an open and flexible instruction set architecture. Since its release RISC-V has received widespread attention in various fields and has become a highly praised architecture.

Advantages of RISC-V:

1. Openness and freedom: RISC-V’s open-source allows anyone to use and customize it for free, without paying patent royalties.

2. Modularity and customization: RISC-V’s design allows developers to choose different modules and create custom instruction sets that meet specific needs.

3. Technological innovation: RISC-V’s openness encourages technological innovation and attracts the participation of many companies and research institutions.

4. Wide range of application fields: RISC-V can be used for embedded systems, IoT devices, servers, high-performance computing and other fields.

RISC-V is an eagerly anticipated open-source instruction set architecture, with a wide range of application prospects. It represents the future direction of computer processor design, and its openness, freedom, and technological innovation make it have potential in multiple fields. To boost the development of RISC-V, Forlinx Embedded launched a new product - FET7110-C System on Module, which is the first product based on RISC-V architecture.

FET7110-C SoM is based on StarFive’s 64-bit high-performance quad-core RISC-V JH7110 processor design and development, with high performance, multi-function, low power consumption characteristics, CPU stable working frequency 1.5GHz, Coremark score of 5.09 CoreMark/MHz, performance better than Cortex-A55. 7110 uses IMG BXE-4-32 MC1 architecture, provides powerful GPU processing capability, supports multi-channel video encoding and decoding, and supports rich functional interfaces such as 2 PCIe2.0, 2 Gigabit Ethernet, and 2 CAN2.0, making its application scenarios more extensive.

In terms of power consumption, the FET7110-C SoM is divided into eight power domains that can be switched independently. By using software, the CPU frequency can be adjusted, allowing customers to dynamically control the power consumption according to different application scenarios.

FET7110-C SoM is a versatile board for all industries and can be used in many industries such as industrial intelligence, smart surveillance, commercial electronics, smart home and power and energy. After rigorous testing, the FET7110-C SoM can provide stable performance support for customers' high-end applications.

The emergence of RISC-V provides a new option. In the future, with the increasing demand for openness and customization, RISC-V is expected to continue to grow in different application fields. In particular, RISC-V is expected to gain more market share in embedded systems, IoT, education and research.

[riverfloww]

Dear Friends and Family, In memory of my son “Gregory R. Alexander” I have set up on memorial fund in his honor to support the fight of teens against gun violence. The senseless death of my son due to gun violence continues to bring to light a need for gun control and resources in the African American communities who are disproportionately affected by gun violence. The Killing of our people of youth by each and others must Stop By creating this memorial fund, I hope to continue to raise awareness of this pressing issue in the black communities. We can save one life at time. I will honor my son’s life and legacy by picking up the torch and help fight the fight through my testimony of his life and senseless death. It is my hopes that others will join me in this fight to save our youth by supporting this cause. No words or actions will bring back my son, but it will allow his death to not be in vain and may save the lives of your sons, daughters and grandchildren in the future. Its time we believe in ourselves as a people, believe in our community, invest in our youth and build up one another. Let’s not let Gregory’s death be in vain stop the violence. I want to thank you in advance for your support of “The Gregory R. Alexander Memorial Fund” a gift of any size will help to support these efforts. To make your  donation please go to https://www.paypal.me/123Harmony or https://cash.app/app/XCSVMCR Thank you for taking the time to read this note during a time sorrow and for being a part of Gregory’s life and help build his legacy. He will never be forgotten as we continue to show his life mattered by supporting this great cause. Sincerely with Love His Father Gregory Alexander New Orleans Original Barber Masters Barber , 5043727398 Mobile 1 504-316-5689 https://anchor.fm/gregory-alexander Riverfloww #Riverfloww #Gateway #Centerlifecycle #BuildingCenter #CoreMark #XPOLogistics #Boys&GirlsClub #EvergreenConstruction #3CVentures #secoPhoenix #CSMAmerica #3CVentures #heatinglinearair #WasteProDiverse #StaffingVirginia #Highland #PowerselectricalSolutions #PremierProperties #EmpireDistributorsIncorporated #MetrowaterproofingInc #DunnConstruction #LanierHavocseries (at Georgia Works) https://www.instagram.com/p/B7194p5lmwX/?igshid=b9ihz0y12ho1

[princessallura]

I had planned to do an update yesterday evening but I got conned into working last night and I also got conned into Thursday with today being the only day off. Hell, when you are given a chance for overtime pay, you take it! 

When I walked into work yesterday, my boss’s boss was there. I am not a fan of Edgar but surprisingly he was pleasant to deal with. He was happy to see me and happy I was stepping into a bigger role at the store. I did not get to talk to him much because we were busy.

But after he left, Tom came up to me and asked if I was interested in overtime and I was like, “HELL YES!” I had to choose between working later on today or Thursday. I took Thursday to allow myself a chance to rest. When I left work tonight I clocked out with nearly forty-one hours under my belt. By the end of Thursday evening, I am looking at nearly fifty hours. 

I would not have had that extra hour if it had not been for Victoria. She was supposed to show up last night. When the clock hit eleven, I thought, “Okay, she is running a bit behind.” Eleven turned into eleven-thirty and I had to call Tom. I was actually contemplating not even calling him and just staying the extra hour but I did not want to get him into trouble so I did. He came in at midnight and sent me on my way. 

I learned that Victoria did not show up until nearly two that morning and when Tom returned later that morning, nothing was done. I had planned on making cookies but I was left with a mess of store - Coremark had come in and I had to check everything in and get it squared away. I had wanted to finish putting things up (all I had left was three boxes of candy that needed to put up) but I had been busy all day and I was slightly behind in the things that needed attention around the store.

Honestly, I did not get a chance to touch the cooler like I wanted to. After finally getting dishes done and putting everything else away, the cooler was the last thing on my mind. I did tell Mike that the cooler would be the only concern that would need his attention. I think he was surprised to see me since I was supposed to be off. xD

As for When My Heart Shatters, I am working on that. I just have not had any time to do any sort of writing. I cannot offer a date that the next chapter will be released but know that each time I am off work, I do work on it. I have been going back and forth over the whole Miroku/Sango part and been taking out and adding to it. I have started the Toga and Sesshomaru portion of it but my Muse has written out some of it and then completely deleting it when it doesn’t come out the way she wants. So, please have patience for me. I have no intentions of abandoning either When My Heart Shatters or A Jealous Betrayal. Those will be updated as soon as possible.

Anyway, I need to end this. I need to find something to eat and then write for a bit. See you later on! 

[beetnelson]

Had to come here at 10 am to help stock the coremark order and the bitches didnt even come.

[gauntghoul]

love working on coremark days lit just get to vibe and do a bunch of checking and rechecking and stocking and organizing

[imagicsolution-blog]

How To Improve Security on Weighbridge for Vehicle Weighing  and Ticket Printing

How To Improve Security on Weighbridge for Vehicle Weighing  and Ticket Printing

                 Now Day All Type of Industries Using In-house Weighbridge for Material Inward and Outward in Factory, also many People Install Road Weighbridge, all are not trusted weighbridge,  some time operator thieving / stealing by change Vehicle Weight, after long time related department will get information about this, it very late to recover all loss and  company Goes very big Loss,  

Problem :  

·         Bellow pint provide detail how to operator thieving

·         Weighbridge Operator enter weight manually and modify

·         Weight Wrong Vehicle Against to right Vehicle

·         Wrong Vehicle Placement position on Weighbridge

·         Operator and Driver take wrong weight

Solution :

               For avoid above Problem Imagic Solution Provide Secure CCTV Weighbridge Software,  it will connect Any Make IP Camera and Capture Vehicle At the time of Weigh ticket and Generate PDF with vehicle and send to email.

                 In Market List Of Company Provide Weighbridge and Scale Like Monil Automation, Metlor toledo, Race Lake, Sartorius, Imagic Solution, Kunal Enterprise, M.D Kantawala,  Endeavour Instrument, Essae Digitronics, Himatnagar Scale Mfg, Sampad Scales & Systems, AXPERT ENTERPRISE, Wel-tech Weighing Systems, JAI KISHAN INDUSTRIES, Poonawala Electro Weigh, Tulsi Trading Company, MANSI INSTRUMENTS, Endel Weighing system, Axpert Corporation, Technoweigh India, EAGLE SCALE MANUFACTURING WORKS, ORBIT Computer & Telecommunication, SmartB Technology, Samurai Technoweigh (India) Pvt. Ltd, S. S. Weighing Solution, Leion Engineering, Expert Weighing Solution, Swastik Systems & Services, Unitech System & Automation, Digital Weightronics, Sensotech Weighing System Pvt.Ltd., Rkd Weighing Pvt. Ltd, Coremark India Pvt. Ltd, Micro Weigh Engineers & Technologies, Techno Scale Industries,  Prime And Automations, Swisser Instruments Pvt. Ltd, Eroz Environ Engineer Pvt. Ltd etc..

               All Above Company Provide Weighbridge but it its provide simple software, but we adding extra facility in above all weighbridge with Camera, Email, SMS, RFID etc, and Make Secure solution for Weight ticket Generating, Main benefit of this software can communicate any make weighbridge indicator, so it will implement anywhere or any existing weighbridge, also this very easy to use so operator can familiar with it.

                 Now day weighbridge happen theft and mall function process,  so Imagic solution design CCTV Security Weighbridge software with cctv camera, CCTV Weighbridge software capture Automatically Vehicle Image at the time of ticket save, and store Image in HDD, it will also Print Vehicle Image/photo in Print, also software automatically sending email to registered email id with pdf file, and relegated dept verify that for more detail need to visit : imagicsolution.com

                 In this time everybody use to computer and software, in particular weighing field is very critical to mange vehicle and goods weighing with perfection, also weighing operator is not much educated too,  so he cannot manage Complicated software,  so we design easy to use weighbridge software,

               Imagic Solution Weighbridge Software developed in latest technology that’s why it speedy and support latest OS like XP, Win7, Win10, Win8, Vista etc...

  This Software suite for following industry

ð  Cement Industry

ð  Sugar Industry

ð  Mines Owner

ð  Crusher Industry

ð  Quarry  Industry

ð  Any Industry who can operate weighbridge

ð  Oil Industry

ð  GAS Industry

ð  Petroleum product Industry

ð  Plastics Industry

ð  Metal Industries

  Software Key Feature:-

ð  User Friendly Software

ð   Working with Any Make Indicator

ð   Window Based Software

ð   Support XP, Win7, win8, win10  with OS

ð   Connectivity with SAP, ORACLE, ERP, AX, EBiz, etc..

ð   Master for Customer, Product, Supplier, Transporter.

ð   Provide Custom Flexi User define 12 field

ð   Communicate With Any Make RS232 Indicator and LAN Indicator

ð   Connect with Any Brand Existing Weighbridge

ð   Provide various type of report

ð   Support to Malty Database

ð   Integrate Any Make 4 IP Camera with software

ð   Automatically Capture Vehicle Image /Photo at the time of ticket save

ð   Generate automatically pdf file with Vehicle Image

ð   Send Automatically pdf file to registered email id

 for demo video please visit link.  http://www.youtube.com/watch?v=qFKhJU_Abjg&feature=youtu.be

[tradecomp]

AMD Ryzen Embedded V3000

A família de processadores AMD Ryzen Embedded V3000 traz o alto desempenho da arquitetura de CPU “Zen 3”, entregando novos níveis de poder de processamento, eficiência térmica, e conectividade I/O de alta velocidade, em um footprint BGA compacto e competitivo. Oferecendo desempenho escalonável de processamento para uma grande variedade de aplicações de Storage (enterprise e industrial), e sistemas de Networking e Edge, a família de processadores V3000 é otimizada para operação 24x7 com alta confiabilidade, para aplicações que possuem requisitos pesados de workload.

Veja abaixo os destaques da família V3000:

- AMD “Zen 3” x86 CPU cores com opções desde 4 cores/8 threads até 8 cores/ 16 Threads ;

- O processador Ryzen™ Embedded V3C18I (25W) entrega até 124% melhor desempenho single thread de CPU vs o Ryzen™ Embedded V1500 (25W) no CoreMark ;

- Baixos TDPs (thermal design power) variando de 10W até 54W ;

- Memória DDR5 dual-channel (até 4,800 MT/s , suporte a ECC) ;

- DRAM Error correcting code (ECC) para correção single-bit da memória ;

- Até 20x lanes de PCIe Gen4 ;

- Grande variedade de periféricos de alta velocidade e suporte à interfaces, incluindo 2x SATA 3.0 ou 2x4 NVMe, 2X USB 4.0 (até 20Gb/s por canal, 40Gb/s por port), 2x USB 3.2 Gen2 (até 10Gb/s) e 4X USB 2.0 ;

-  Dois MACs , 10Gb Ethernet ;

- BGA package FP7r2 (25x35mm, 0.65mm pitch) ;

- Suporte ao Linux® OS  ( Ubuntu® and Yocto drivers ) .

Para maiores detalhes :

AMD Ryzen™ Embedded V3000 Series website: https://www.amd.com/en/products/ryzen-embedded-v3000-series

Contac us:

Phone: +55 11 5507-2627

Email: luciano-taddeo@tradecomp.com.br

[rockinmyownboat]

I don't care about being late for work if the job is a stress filled hell hole.

The guys on my crew (with the exception of our lead) are assholes. I could not care less about them.

The company itself is a disorganized understaffed chaotic mess. Maybe if they had some sense to their business decisions that would be different. They like to THINK they are running a full staffed crew. The spineless beauracrats in tinseltown never come down from their windowed offices to the freezer to see what life is like for the common men they sign the biggest paychecks for.

Yeah we make the most. Cause we get shit on the most.

I could not care less about them.

They claim they're trying to "make some changes..."

If that were the case, they would have already made them.

I love being able to see right through the smoke and mirrors.

But it makes it hard to get along with everyone that accepts that false paradigm.

I keep telling my bosses,

"Look this transaction is simple. I come to work. I do my job. You pay me. End of story. Everything else is fucking politics."

I literally chose this job because of it's simplicity and the experience I'm gaining. I wanted to know what it's like working long hard hours in the freezing cold 🥶

I have to remind myself there's a reason I'm doing this and putting myself through it. It's not to suffer for it's own sake but to build up my own endurance and character.

There's a method to the madness. I'm building something. Gaining valuable skillsets. I can't get lost in the moment.

The supervisors and leads all love me. My fellow coworkers feel differently however.

Turns out people are extremely political even when they claim they aren't. They have to choose sides.

They have to have someone to love. And an enemy to hate.

Creating an enemy out of thin air is exactly what politics are all about. Making a choices to hate someone based on nothing more than an imaginary perception of them.

Fuck.

That.

I don't do politics. With me, what you see is what you get. I know what I know until I know something different.

If I come crooked it's because you've crossed a personal boundary. We're not enemies until you commit yourself to making one. That's not on me. That's on you.

I will still have no problem telling you to fuck off though. Believe that.

#mylife

#mythoughts

#winterwonderland

#coremark

[happyjoyisfree]

Check out this listing I just added to my Poshmark closet: Core Mark Tie Lapel Pin Anniversary Commemorative, Gold Vermeil & 2mm Diamond.

[forlinx]

Forlinx Officially Launches RISC-V SoM Based on StarFive JH7110!

Forlinx has officially launched their latest System-on-Module, featuring the powerful StarFive JH7110 RISC-V chip. These versatile SoM and compatible carrier board are now available for order, catering to a wide range of applications including commercial, medical, and industrial automation.

Recently, a few embedded products have emerged utilizing the same processor, including the VisionFive 2, Pine64, and Milk-V Mars. However, the FET7110 SoM will be the first product from Forlinx to feature the integrated Jinghong 7110 processor. See the JH7110 block diagram for reference.

• JH7110 – 64-bit RISC-V, up to 1.5GHz (quad SiFive U74-RV64GC, up to 5.09 CoreMark/MHz)

JH7110 block diagram

The JH7110’s GPU integrates the IMG BXE-4-32 MC1 (up to 600MHz) which offers full support for mainstream APIs like OpenCL 3.0, OpenGL ES 3.2, and Vulkan 1.2.

Regarding power consumption, Forlinx indicates that the JH7110 is segmented into eight independently switchable power domains. Additionally, the CPU frequency can be dynamically adjusted via software, allowing customers to fine-tune the frequency based on various application scenarios that require flexible control and power consumption.

The JH7110 facilitates camera access through both MIPI-CSI and DVP interfaces, with ISP support. It enables video decoding capabilities of up to 4K@60fps and video encoding of 1080p@30fps. Moreover, the SoM supports HDMI (4K@30fps) and RGB (1080p@30fps) display output interfaces, along with MIPI-DSI (2K@30fps).

Specifications listed for the FET7110-C SoM include:

• Memory/Storage:

￮ 2/4GB LPDDR4 RAM

￮ 32GB eMMC 5.0

￮ 100 Mbps QSPI

￮ SD 3.0/MMC 5.0

• Connectivity:

￮ 2x GMAC for RMII/RGMII 10/100/1000 Mbps

• Display/Audio:

￮ 1x HDMI 2.0 (up to 4K@30fps)

￮ 1x 4-lane MIPI DSI, (up to 2K@30fps)

￮ 8-lane I2S PCM/TDM

• Camera:

￮ 1x 4-lane MIPI-CSI

• Expansion:

￮ 1x PCIe2.0x1, 2 PCIe2.0 controllers integrated w/ PHY

• USB:

￮ 1x USB 2.0

￮ 1x USB 3.0

• I/O Peripherals:

￮ 6x UART, 7x I2C, 7x SPI

￮ 1x SDIO

￮ 8x PWM

￮ 64x GPIOs

￮ 2x CAN 2.0B (Up to 5Mbps)

• Power:

￮ 5V DC

• OS:

￮ Linux 5.15.0

• Mechanical:

￮ 60 x 38mm

￮ B2B connectors (3x 80-pin)

Specifications listed for the OK7110-C development board include:

• Memory/Storage:

￮ 2/4GB  LPDDR4 RAM

￮ 32GB eMMC 5.0

￮ 100 Mbps QSPI

￮ SD 3.0/MMC 5.0

• Connectivity:

￮ 2x Gigabit Ethernet ports

• Display/Audio:

￮ 1x HDMI 2.0 port

￮ 1x MIPI DSI

￮ 2x Speakers

￮ 1x Mic

• Camera:

￮ 1x MIPI-CSI

• Expansion:

￮ 2x PCIE 2.0

￮ 1x Micro SIM

• USB:

￮ 1x USB Type-C

￮ 3x USB 3.0

• I/O Peripherals:

￮ 2x CAN

￮ 2x RS485

• Other Features:

￮ 1x Power button, 1x Reset key

￮ RTC battery

• Power:

￮ 12V DC (via barrel connector)

• Mechanical

￮ B2B connectors (3x 80-pin)

These products are now available for ordering. Customers can find the product page for the FET7110-C SoM here.