Tumgik
#Indium gallium nitride
A new kind of solar panel, developed at the University of Michigan, has achieved 9% efficiency in converting water into hydrogen and oxygen -- mimicking a crucial step in natural photosynthesis. Outdoors, it represents a major leap in the technology, nearly 10 times more efficient than solar water-splitting experiments of its kind.
But the biggest benefit is driving down the cost of sustainable hydrogen. This is enabled by shrinking the semiconductor, typically the most expensive part of the device. The team's self-healing semiconductor withstands concentrated light equivalent to 160 suns.
Currently, humans produce hydrogen from the fossil fuel methane, using a great deal of fossil energy in the process. However, plants harvest hydrogen atoms from water using sunlight. As humanity tries to reduce its carbon emissions, hydrogen is attractive as both a standalone fuel and as a component in sustainable fuels made with recycled carbon dioxide. Likewise, it is needed for many chemical processes, producing fertilizers for instance.
"In the end, we believe that artificial photosynthesis devices will be much more efficient than natural photosynthesis, which will provide a path toward carbon neutrality," said Zetian Mi, U-M professor of electrical and computer engineering who led the study reported in Nature.
Read more.
28 notes · View notes
itsgerges · 2 months
Text
Tumblr media
Kind Regards
Can A Light Beam Its Speed 1.16 million km per second Be Found? (Revised)
or
or
or
Abstract
The paper provides 4 hypotheses with their explanations and proves – let's provide them in following
Paper hypotheses
Hypothesis No. (1)
The space is created from one energy and this energy is provided by a light beam moves by a speed 1.16 million km per second – the speed is registered in the created space proves the speed is a fact.
Hypothesis No. (2)
The Gravitational Waves Are Produced By The Planets Motions Energies And Not By The Sun Gravitational Field– Moreover- The Sun Does NOT Produce A Gravitational Field And It Has No Massive Gravity- 
Hypothesis No. (3)
Mars original orbit was between Mercury and Venus and Pluto was The Mercury Moon (Pluto size was equal Mercury size) But these two planets had migrated from their original orbits as a result for a collision- the planets migration caused a risk for the solar system geometrical design- Uranus and Jupiter the Two planets worked to repair the solar system design– that caused Jupiter orbit to be the main orbit in the solar system design- Jupiter orbit proves the speed 1.16 million km per second is a fact.   
Hypothesis No. (4)
The Sun Is a phenomenon created by the planets motions
The sun rays is created from the gravitational waves motions energies and the gravitational waves are produced by the planets motions energies-
Based on that 
The Sun Is A Phenomenon Created By The Planets Motions
And
The Sun Is NOT Doing Nuclear Fusion To Produce Its Rays- instead- The Planets Motions Energies Total Is Used To Produce The Sun Rays
The Sun Is Created After All Planets Creation And Motion – means
The Planets Are Created And Moving In Their Orbits Around A Point Of Space Before The Sun Creation- And The Sun Is Created On This Point Of Space around which the planets revolve - And
No Planet moves by The Sun Gravity (Newton is Wrong) - And
The Sun Doesn't Produce A Gravitational Field (Einstein Is Wrong)
And
The Sun Is A Phenomenon Created By The Planets Motions– means-The Sun creation and death depends on a cycle – means – after this current sun death another sun will be created for the solar system.
The Hypotheses Explanation
The abstract provides the hypotheses explanation and the paper provides their proves and discussions- In following the hypotheses will be explained in details 
NOTICE - The creatures and all matters on the Earth are created from the sun light energy and the sun light speed is 300000 km/s, because of that, the creature realization is limited to the speed 300000 km/s and can't realize the original speed (1.16 million km per second) that means the speed 300000 km/s is a limit for the creatures realization and not for the universe design.   
Notice- this revised version adds only more proves for the paper first hypothesis-
Hypothesis No. (1)
The space is created from an energy and this energy is provided by a light beam moves by a speed 1.16 million km per second – the speed is registered in the created space which proves the speed is a fact
The Hypothesis Explanation
I- The Space Is Created By One Light Beam Energy- And This Light Beam Speed Is 1.16 million km per second
I-1 Preface (the main idea)
I-2 The Space Creation Method (the distances are one network)
I-3 Light Coherence between light (1.16 million km /s) and light (300000 km/s)
I-4 The Matter definition (based on my planet diameter equation)
I-5 The Planets Creation
I-6 Can The Time Machine Be A Fact?
The Hypothesis Proves
I-7 The Proves Logic Analysis
I-8 Planet Velocity Is A Function In A Speed = (1.16 million km /s)
I-9 Planets Orbits Are Defined By A Motion Its Speed = (1.16 million km /s)
I-10 Jupiter distances are defined by a motion by a speed = (1.16 million km /s)
I-11 The Solar System Geometrical Design Proves The Hypothesis
I-12 The Solar System Distances Analysis Prove The Hypothesis
I-13 Deep Analysis For The Planets Orbits
1-14 Light defines each planet orbital period
I-15 Can Planet Diameter Be Used As A Period Of Time
I-16 Mercury Orbit Analysis
I-1 Preface (The Main Idea)
The solar system (planets and distances) is created from one energy and this energy is provided by one light beam and this light beam moves by speed (1.16 million km/s)
The space is created before the planets creation-
Let's write the whole story in following
The light beam (1.16 million km per second) started its motion from Mercury orbit moves toward Pluto orbit– by that– we consider Mercury orbit is the origin point-
Now- we should notice- No planet is created yet- the motion from Mercury orbit to Pluto orbit defines the motion direction- and No planet is created before this motion end nor during this motion- the planets will be created after this motion is finished means when the light 1.16 million km per second reaches to Pluto (orbit)- after this event – the planets will be created –as I will explain later  
Notice
The light (1.16 million km per second) creates the distances by its motion- means- the light moves from Mercury point to Venus point– the distance from Mercury to Venus was not found and is created only by the light motion through it for first time- means – before the light motion this distance was NOT found- It's found after the light moves through this distance for first time-    
This is similar to the blood motion through the arteries, the blood creates these arteries and the blood moves through these arteries, but the blood created these arteries with its first motion and that needed energy- but – after the arteries creation the blood move through them without any energy is required- means- the first motion is the most important one because by it the arteries are created
Shortly- The space is created from the energy of this light beam its speed 1.16 million km per second – NOW- after the Space creation- the light beam energy is decreased because of the energy consumption in the space creation process- and the rest energy is one light beam its speed is (C=300000 km/s =the light known speed) – But - We understand that- it's the same one light beam- its speed was 1.16 million km /s before the space creation- and the light created the space and that caused to consume the light energy and that caused to decrease the light speed to be 300000 km/s
Shortly- the light beam started its motion from Mercury (orbit) with speed 1.16 million km /s and reaches to Pluto (orbit) with a speed 300000 km/s because of the energy consumption in the space creation process  
Let's give example to explain this idea
Imagine we create A Sea Of Water- we use energy to create this sea of water- now we have some energy and we use this energy to create this sea of water- BUT- our energy is NOT spent completely But there's a small part still rest with us – this small part of energy is used to create one wave moves through this sea and this wave speed is 300000 km/s (I suppose the space is similar to the sea of water)
Now – the rest energy is found in one light beam its speed 300000 km/s and this light beam is found NOW in Pluto Orbit – and this light beam will be reflected from Pluto orbit toward the inner planets– means- the rest energy will move in the reflected direction to the original light motion direction.
This idea will be explained in details in the next point- shortly
The light beam (300000 km/s) will be reflected from Pluto toward the inner planets
AND  the light 300000 km/s will meet the original light beam (1.16 million km per second) in the origin point (in fact – beside the origin point) and there's a coherence of light is done between the light beam (300000 km/s) and the light beam (1.16 million km per second) – this coherence of light is proved strongly- we have to ask (how can that be possible while the light beam 1.16 million km /s is consumed and the new light beam 300000 km/s is the rest energy? how this light beam (300000 km/s) can meet the original one (1.16 million km per second)? in points no. (I-3) and no.(I-6) I answer this question.
Notice (1) I suppose the rest energy is a light beam its speed is (C=300000 km/s) but this idea is for simplicity- the rest energy can be in any wave form its speed (C=300000 km/s) – no necessity to be in visible light beam form
It's simply energy moves by the known speed of light (C=300000 km/s)
Notice (2)
All Planets Orbits Are Defined Before Any Planet Creation-
The light used the distance from the sun to Pluto as one area and create one geometrical design for this area before any planet creation 
Notice (3)
The planets are created from the rest energy its speed (300000 km/s) – means- the space is created by the light 1.16 million km per second and the energy is consumed in the space creation and the rest energy is one light beam its speed 300000 km/s (or one wave moves by the known speed of light C=300000 km/s) – the solar planets are created from this one wave its speed 300000 km/s and that means all planets orbit are created and defined before any planet creation
Notice (4)
The Sun Is Created After All Planets Creations And Motions
The sun is a phenomenon created by the planets motions energies total
The sun doesn't produce a gravitational field and doesn't have massive gravity
Logically – No planet moves by the sun gravity
(The Planet Moves With The Energy From Which The Planet Is Created – Newton is wrong- later we discuss the proves)
Notice (5)
The child (fetus) inside his mother is created by the blood motion- the blood motion creates arteries for this child and through these arteries the blood moves also but the arteries themselves are created by this same blood motion- Similar to that- the distances are created by the light motion energy and the light moves through these distances also but originally these distances themselves are created by the light motion energy-  means the distances creation is done with the first time of the light motion through them - that required energy- but after the distances are created no more energy is required- the light (or planet) can pass simply through these distances
I-2 The Space Creation Method (the distances are one network)
Data
778.6 = 1.16 x 671
721    = 1.16 x 621
629    = 1.16 x 543
543    = 1.16 x 468
5906  = 1.16 x 5127
These numbers are distances in (million km)
778.6, 721, 671, 629, 551 are Jupiter distances to the sun, Mercury, Venus, Earth and Mars respectively- 5906 and 5127 Pluto distances to the sun and Jupiter respectively     
468 = 936 /2 where (940 million km = the Earth orbital circumference)
Discussion
(1)
The previous data tells us how the light beam motion creates the distances-
Simply the light uses a distance as (a period of time) and travels through this period another distance- that can be understood clearly from Jupiter distances- let's look deeply as possible
The light beam (1.16 million km per second) uses the period 629 seconds to pass a new distance = 729 million km (Mercury Jupiter distance is 721 million km error 1%) – where 629 million km = Jupiter Earth distance
Also  
The light beam (1.16 million km per second) uses the period 671 seconds to pas a new distance =778.6 million km (Jupiter orbital distance) 
where 671 million km = Jupiter Venus distance
by this method the light creates the distances based on each other- and that makes all distances to be created depends on one another and that makes all distances in the solar system to be One Network where all distances are created based on the same One Geometrical Design
(2)
The data shows the creation method- and we understand that- the distance 551 million km (Jupiter Mars Distance) is created firstly and the light (1.16 mkm/s) used this distance as a period of time (551 sec) and the light travels during this period a distance =(639 million km where 629 million km is Jupiter Earth distance error 1.5%) and then the light uses the new distance (629 mkm) as a period of time (629 sec) and the light travels during this period a distance = (729 million km – where 721 million km = Mercury Jupiter distance – error 1%)
The data shows the method clearly and we understand the light original motion started from Mercury orbit to Pluto orbit because the distances are created based on one another in that direction of motion as explained clearly
(3)
New data NO. (1)
2723 sec x 2 x 300000 km/s = 1622 million km – where
2723 million km = Uranus Earth Distance
1622 million km = Uranus Neptune Distance
The data shows- the light beam its speed (C=300000 km/s) is in proportionality also with the created distances but this proportionally is found in Reflected Direction
Logically, The light can NOT move from Uranus to Neptune and after that the light returns to move from Uranus to the Earth- it's simply reflected direction  
The distances are NOT created by the motion of this light beam (300000 km/s) – but the distances are created by the motion of the original light beam (1.16 million km per second) but the proportionality between the distances with the light (300000 km/s) is found because there's a proportionality between the original one (1.16 million km per second) and this light beam (300000 km/s) – AND 
Because the light (300000 km/s) moves in the reflected direction of the original light beam (1.16 million km per second) that causes the proportionality between the distances and the light (300000 km/s) be in a reflected form
New data NO. (2)
2094 sec x 300000 km/s = 629 million km
2094 million km = Uranus Jupiter distance
629 million km   = Earth Jupiter distance
The light (300000 km/s) moves in reflected direction- for that- the distance 2094 million km is used as a period of time to pass a new distance (629 mkm)
The data proves the idea clearly
Notice (1)
The proportionality between the light (1.16 million km/s) and the light (300000km/s) will be discussed in point no. (I-3)
Notice (2)
In Point (**) I prove the gravitational waves are produced by the planets motions energies- and I prove that – the planets motions energies move toward Pluto and this energy is reflected from Pluto toward Venus- this fact is proved by powerful data and proves- for that – I don't explain in details the light motion trajectory from Pluto toward the inner planets because this motion trajectory is studied in details in the hypothesis No. (2) of this discussion- understandable that- the planets motions energy trajectory is the same trajectory the light moves through it – means this trajectory is studied in details and powerful proves in point no. (**)
Notice (3)
Jupiter Distances Analysis shows that Jupiter orbit is the central orbit for the light (1.16 million km per second) based on which all planets orbits are defined.
But – this is not the first creation case –
The light (1.16 million km per second) created the planets orbits based on each other starting from Mercury orbit moves toward Pluto orbit – this is the fist creation case – and this fact is proved strongly in point no. (I-9*)
BUT
Mars had migrated from its original orbit (Mars original orbit was between Mercury and Venus) and Pluto had migrated also (Pluto Was The Mercury Moon revolves around Mercury and Pluto size was equal Mercury size)
The planets migration caused a serious risk for the solar system geometrical design- Uranus was the first planet tried to repair the solar system geometrical design and to save it- by that
Uranus created a vertical effect on Jupiter orbit to fix Jupiter in its orbit and prevent it to migrate with the migrant planets- and based on Jupiter orbit the other planets orbits are modified – that supported the solar system original design and saved it which causes to protect the geometrical design from the destruction.  
As a result
That causes Jupiter orbit to be the most important orbit in the solar system- the paper third hypothesis explains the planets migration and Jupiter orbit analysis is done with the solar system design analysis (I-11*)
I-3 Light Coherence between light (1.16 million km /s) and light (300000 km/s)
(1)
The Coherence Of Light
The previous explanation told us that we have 2 light beams-
The original light beam its speed (1.16 million km per second) and it started its motion from Mercury orbit to Pluto orbit (where Mercury orbit is the light motion origin point) – and this light beam created all distances in the solar system and lost its energy in the space creation process and the rest energy is one light beam its speed is (C=300000 km/s)
The other light beam is the rest energy- its speed is (C=300000 km/s) and it moves in a reflected direction from Pluto toward Venus and Mercury-
Now – we have a coherence of light between these two light beams- the coherence is proved by powerful proves BUT firstly we have to ask (how can this coherence be occurred)? Because the original light (1.16 million km/s) is consumed and its energy is used already and the rest energy is this light its speed is (300000 km/s) - HOW can the light (1.16 million km/s) meet the light (300000 km/s)??
Imagine we have (116 dollars) and we spent all money except (30 dollars)- how can this (30 dollars) meet the original money (116 dollars)??
Let's write the answer
Suppose the light beam (300000 km/s) moves in the reflected direction (in the space) and also (in the time) – that can enable the light (300000 km/s) to meet the original one (1.16 million km/s) in the past and the coherence will be done there in the past- and we see the coherence results and effects on the solar system -
Means – the light (300000 km/s) moves into the past and found the original light (1.16 million km/s) in the past
Notice No. (1)
The original light beam (1.16 million km/s) can NOT move toward the future to meet the light (300000 km/s) because in the future the original light beam (1.16 million km/s) is NOT found –by that – the coherence can't be occurred in the future - But – the light (300000 km/s) can move into the past because this light beam (300000 km/s) was found in the past because it's a part of the original light beam (1.16 million km/s)
Notice no. (2)
I prove the coherence is done by powerful proves- that tells- this idea is a fact–means- there's a strong proof tells (in fact the light beam 300000 km/s moved into the past) and if we can use this feature practically we can get photos from the past events and by that we can have photos from the catastrophe which killed the dinosaurs and know much better about what had happened really in that time - This can be a real machine of time – the light motion into the past is a strong method to perform this invention. 
Notice no. (3)
Why Can NOT We Move Into The Past As We Move Into The Future?
This question is answered in point no. (**)
(2)
The Light Coherence Proves
First Proof
The planets order is typical to the interference of Young –
In the double slits experiment, Young Interference is consisted of bright fringes and dark fringes - If we consider planet diameter is equivalent to bright fringe – we will see that- the planets order is typically to Young interference because
Jupiter (the greatest fringe) is in the middle and the fringes width is decreased gradually on both sides – typically to the planets order
Notice / I have proved that (Mars original orbit was between Mercury and Venus) if we restore Mars to its original orbit the order will be typical to the Young Interference
(I prove this fact in point no. **)
Second Proof
The planets velocities are defined based on the speed (1.16 million km per second) and the planets velocities analysis shows the speed (300000 km/s) is the planets motions limit- means- the planets velocities are defined based on both velocities (1.16 million km per second) and (300000 km/s) I prove this fact in point No. (**)  
Third Proof
The light coherence defines the solar day period (24 hours) which is the solar system design cornerstone 
(1.16 /0.3) x 2π = 24.3
By this equation the space and time are created- the equation tells–the space is created in curves (2π) and the time is created in units each unit is (24 hours) 
Please note – the solar system geometrical design depends on the light motion in a solar day (24 hours = 86400 seconds) 
The light (1.16 million km per second) moves in a solar day (86400 seconds) a distance  = 100733 million km (= the planets orbital circumferences total)
Fourth Proof
The planets data prove there's a speed (1.16 million km per second) found in the solar system but the sun light beam moves by speed (300000 km/s) that tells the two speeds are facts and found in the solar system and the coherence between them is a logical result
The hypothesis proves discuss many powerful proves for this fact-
Notice- the coherence of light is a very important fact because it tells the light (300000 km/s) moved into the past and by that gives us a proof for the motion on the time axis- for that – many powerful proves support this fact.
I-4 The Matter definition (Based On My Planet Diameter Equation)
(1)
Let's remember my planet diameter equation
Planet Diameter Equation (v1/v2)= (s/r)= I
v = Planet Velocity                                                          
r = Planet Diameter
s= Planet Rotation Periods Number In Its Orbital Period
I= Planet Orbital Inclination        (example, 1.8 degrees be produced as a rate 1.8)
v2, s, r and I are belonged to one planet and v1 is belonged to another planet
The planet (v1) is defined by test the minimum error 
Earth Equation uses Neptune velocity
Mars Equation uses Pluto velocity
Jupiter Equation uses the Earth moon velocity
Saturn Equation uses Mars velocity
Uranus Equation uses Neptune velocity (As Earth)
Neptune Equation uses Saturn velocity
Pluto Equation uses the Earth moon velocity (As Jupiter)
(The Equation works from The Earth To Pluto) (the discussion explains the reason)
Example
Neptune Equation (89143 /49528) = 9.7/ 5.4 =1.8         
89143          = Neptune rotation periods number in Neptune orbital period
49528 km    = Neptune diameter
9.7 km/s      = Saturn velocity
5.4 km/s      = Neptune velocity
59800 days = Neptune orbital period (and Neptune rotation period =16.1 hours)
1.8 degrees = Neptune Orbital Inclination
(the equation is proved and discussed in details in point no. **)
(2)
Can We Define The Matter Nature Based On My Planet Diameter Equation?
The equation tells, the matter is created based on its motion! means Neptune diameter is 49528 km because Neptune velocity is 5.4 km/s!!
That tells the motion with velocity 5.4 km/s is defined before Neptune diameter is created! Can we understand such definition for the matter nature? let's try
(A)
The Matter Nature
The space and matter are created from the same original energy and they move with this original energy motion- BUT the matter has a distinguish picture and different velocity from the space picture and velocity (notice- The Gravitational Waves Prove That The Space Has A Motion)  
If we suppose the space is similar to the sea of water, the matter be similar to a whirlpool or a vortex found on the sea page- means- the matter is a geometrical design has a distinguish picture from the space- as the whirlpool, it's created from the sea water but it has a distinguish picture from the sea waves picture
Means
The whirlpool is carried by the waves motion- and- the matter is carried by its original energy and moves with it- No Mass gravity is required for the matter motion- means- the matter is MOVABLE by nature.
Also
The whirlpool dimensions are defined by the water motion - for example- we have a whirlpool its diameter is (2 meters)- this diameter is defined by the sea water motion features (velocity, pressure and other motion features) by that- the water motion analysis explains how the whirlpool dimensions are created
Also- the whirlpool is created but the creation requirements are needed every day- means- even if this whirlpool is found since years it can be changed immediately if the water motion features are changed- means- the whirlpool creation process is NOT a historical one.
Also- the matter is similar to a creature muscle, the muscle is found based on the blood motion and without this motion the muscle can be changed or removed.
Shortly
The Original Energy Was Found In Motion By Itself (As Moving Light Beam)
From This Moving Energy The Planet Matter Is Created
The Created matter dimensions are defined by the features of this original energy motion (means the planet creation data is defined by the energy motion features)
After the planet creation- The Planet Moves With This Original Energy – means- the created planet moves a motion depending on the motion of this original energy because the planet moves with this original energy motion- and – the planet moves by this original energy motion (No mass gravity is required to cause the matter motion)
The planet creation data is in full harmony with its motion features- this fact is produced logically because the planet data is defined by the original energy motion features.
This explanation tells (Neptune diameter is 49528 km because Neptune velocity is 5.4 km/s)
Example For Explanation
We agreed that the space is similar to the sea of water and the planet (matter) is similar to a whirlpool found on the sea page-  this picture explains the idea clearly- because
We see the whirlpool doesn't move by the sea water waves velocity but by another velocity and that shows a distinguish in form and motion between the whirlpool (the planet) and the sea waves (the space)- BUT- the whirlpool dimensions are defined based on the sea water motion features- and if the motion features are changed the whirlpool dimensions will be changed also- also the whirlpool moves by the sea water motion even with a different velocity relative to the sea waves velocity but the whirlpool motion still is  caused by the sea water motion- based on this picture we can say (because the water motion velocity is 80 km/h that causes this whirlpool diameter to be 2 meters "for example') – this is perfectly our sentence – let's remember it     
(because Neptune velocity is 5.4 km/s that causes Neptune diameter to be 49528 km)
This idea is proved by my planet diameter equation (my fourth equation) (point No.**)  
(B)
Now The velocity is a motion in (A Defined Direction)
Means– the matter is created because it depends on a motion in a defined direction- as we have seen- Neptune diameter is 49528 km because Neptune velocity is 5.4 km/s but this velocity is a motion in defined direction- and that tells Neptune creation depends on a motion in the direction of the (x axis positive "+x ") (for example)
That tells, if this motion moves in (x axis negative "-x ") that will cause Neptune diameter to be changed or perished
Means- the matter creation needs a motion in A Defined Direction
Now let's ask our question
Why Can't The matter (creature) Moves Toward Its Past?
Because the matter depends on a motion in one defined direction- that causes the matter moves into (the future) always and can't move into (the past) let's discuss this question more deeply in point no (I-6)
Notice
No Planet Moves By The Sun Gravity (Newton is wrong) – logically because- the planet moves by its creation force- means- the planet creation and motion should be done by one force only (one energy only) because if two forces have effects on the same one planet- this planet will be broken- this fact is proved strongly with the gravitational waves source discussion (Point no.**)  
I-5 The Planets Creation
I summarize the main idea in following and the idea proves and discussions are found in point no. (**)
(i)
We know, the solar system is created from energy of one light beam its speed is 1.16 million km per second- and – the light created the space (the planets orbits) firstly and the energy is consumed in the space creation- and for that- the rest energy is found in one light beam its speed is 300000 km/s - And
From this light beam 300000 km/s the solar planets are created
Shortly
before the solar planets creation
The solar system was one light beam (or one wave moves by speed of light (300000 km/s)- by that – the solar system is One Wave moves by speed of light (300000 km/s)
Now
The Solar System needs To Create A Stationary Point Its velocity Zero relative to the moving one wave (300000 km/s)
This is the basic information in the solar system design-
The solar system needs to create a stationary point relative to the wave motion- by that – two velocities will be found which are (v1= the wave its speed 300000 km/s) and (v2= Zero= the stationary point velocity relative to the wave motion)–these two velocities produce a relative motion with different velocity 300000 km/s– this relative motion is the solar system design cornerstone.
Shortly – the solar system needs to create A Stationary Point 
Notice– The solar system is carried by the light beam motion, NO stationary point can be found here – it's similar to a ship on the sea water- Nothing can stop- because the motion is done forcedly by the sea water –
The stationary point will be similar to the whirlpool (vortex) on the sea page-  BUT
The solar system needs to create this stationary point - Now – let's try to create this stationary point in following - The solar system uses two procedures to do that,  
(ii)
The first procedure
The wave its velocity 300000 km/s revolves around a point in space (any point in space), the revolution motion creates 2 equal velocities on both sides of the revolution- the two velocities are equal in value and opposite in direction- their total be equal Zero-means- the revolution motion creates A Stationary Point in the center of the revolution. 
The second procedure
The previous idea is correct- but –the velocity 300000 km/s is a huge one and to decrease it to Zero velocity this is a complex process– for that- the wave (300000 km/s) created small waves with low velocities to use them as steps to decrease the velocity to Zero- the small waves are The Planets- (The planet is a small wave moves by low velocity relative to the original wave its velocity 300000 km/s) 
Why Are These Small Waves Required?
Because the velocity 300000 km/s is decreased to Zero by using these small waves and their low velocities- the low velocities are used as steps to decrease the unified wave velocity (300000 km/s) to be (Zero)- this process decreases the velocity gradually from 300000 km/s to Zero depending on these small waves velocities (the planets velocities)  
Means- the planets are created for this process to decrease the wave velocity from 300000 km/s to Zero- and The Planet Is A Small Wave Moves By Low Velocity 
Shortly – the solar system has one complete system of velocities, Starting from Zero to 300000 km/s where the planets velocities are the steps between the two velocities – let's prove that here
(iii)
300000 km = 7.1 x (205.8)^2 where
7.1 is Lorentz length contraction effect for speed 297000 km/s (99% of speed of light)
205.8 km/s = the 9 planets velocities total (176 km/s) + the Earth moon velocity
(The moon velocity =29.8 km/s = the Earth velocity because they revolve together)
Why does the data use the squared value (205.8)^2?
We know the answer- but - Let's remember it
The planets are geometrical points on the same light beam and move with its motion- for that- the planets velocities rates creates rates of time– for example-  Mercury velocity = 1.6 the Earth velocity- that means – one hour of Mercury clock = 1.6 hours of the Earth clock- Why??
Because Mercury and the Earth are carried by the same one light beam- the light moves one motion and passes one distance in one period of time- by that Mercury and the Earth have to move this same motion and to pass this same distance in this same period of time- but the two planets velocities are different- for that- the planets use different rates of time based on their velocities rates and by that the planets move equal distances in the same period of time –
Now- the velocity (205.8 km/s) moves relative to the stationary point (Zero) and creates a rate of time (1 second = 205.8 seconds) –
(one second of the unified wave clock = 205.8 seconds of the stationary point clock)
But – the energy is reflected in the solar system (I prove that in point no.**),
The energy reflection reflects the players – means
(one second of the stationary point clock = 205.8 seconds of the unified wave clock)
The stationary point will be THE SUN – by that
(one second of the sun clock = 205.8 seconds of the unified wave clock) – means
(one second of the sun clock = 205.8 seconds of any planet clock) –
Now during one second of the sun clock, the wave clock needs 205.8 seconds while the wave moves by a velocity 205.8 km/s- means –
During one second of the sun clock, the wave moves 42253 km = 300000 km /7.1
That creates the different velocity 300000 km/s between the sun motion and the wave motion-
Notice 1
The wave (205.8 km/s) moves during 1461 seconds a distance = 300000 km, and we know the Earth cycle (1461 days = 365 +365 +365 +366)
That tells, the speed of light (300000 km/s) is performed by the rate of time and that causes to create the Earth cycle-   
Notice 2
Planet velocity is created by the rate of time- means- if no rate of time can be used – No planet velocity can be created – instead- all motions will be only by speed of light (300000 km/s)- the planet can create a small velocity because it can use rate of time
We realize that clearly because
The planets motions depend on the light motion- by that – the motion is done by One Motor only which moves by speed of light (300000 km/s), the planets can only move by speed of light or create a rate of time for their smaller velocities - No more options are provided.  
Notice 3
We understand that, the planets are geometrical points on the same light beam, means
The planets are similar to carriages in one train and the light motion is the train engine  means the planets are carried on the light beam and move with this light motion
I-6 Can The Time Machine Be A Fact?
To answer this question we need to review basics facts we have studied – let's do that in following
(1)
The solar system is created from one energy and this energy is provided by one light beam
(2)
The light moves simply and freely in any direction (for space) and (for time)- means- the light can move into the future (as matter does) or into the past (which the matter can Not do)
(3)
We know, the solar system is created from one light beam, and this light moves by a speed (1.16 million km per second) - And
We know, the light (1.16 million km per second) created the planets orbits firstly before any planet creation and the energy is consumed in the space creation and because of the energy consumption the light speed is decreased from  (1.16 million km per second) to the known speed of light 300000 km/s – also
We know, the light (1.16 million km per second) started its motion from Mercury orbit moves toward Pluto- that means- the light (1.16 million km per second) started from Mercury orbit with speed (1.16 million km per second) and the light created all planets orbits till Pluto orbit- before any planet creation- and by that- the light lost its energy and the light beam in Pluto orbit reduced its speed to be 300000 km/s as a result for the energy consumption in the space creation process
(4)
Also we know the energy is reflected from Pluto toward Venus (the inner planets)
By that the light beam (300000 km/s) moves in the reflected direction to the original light beam (its speed 1.16 million km per second) 
And – we know-
The light beam (300000 km/s) reaches to the original point (Mercury Orbit) from which the light (1.16 million km per second)  started its motion 
And we know that
A coherence of light is done between the original light beam (1.16 million km per second) and the light beam (300000 km/s)
BUT  we don't know how such coherence can be occurred? Let's analyze that deeply in following
(5)
The produced light beam (300000 km/s) moves in (the reflected direction) to the direction of the original light beam (1.16 million km per second) (In Space)  and reaches to Mercury orbit (the origin point)
But– logically – the produced light beam (300000 km/s) can NOT find the original light beam (1.16 million km per second) there because the original light beam is consumed already in the space creation process and the rest energy is this produced light beam (300000 km/s) – based on that –
How Can This Coherence Be Occurred? Means-
How can the produced light beam (300000 km/s) meet the original light beam (1.16 million km per second)?  The answer is
The produced light beam (300000 km/s) moves (in the reflected direction) to the motion direction of the original light beam (1.16 million km per second) (In Space) and (In Time) Means- the produced light beam moves into (Its Own Past) and in the past this produced light beam (300000 km/s) was (A Part of the original light beam 1.16 million km per second) and because of that the produced light beam (300000 km/s) can meet the original light beam (1.16 million km per second),
And
The two light beams create a coherence (in the past) and we see the results of this coherence in our present time-
The idea is very important because – the coherence of the two light beams (1.16 mkm/s and 0.3 mkm/s) is proved strongly and with powerful proves and any explanation for this coherence will prove that the produced light beam (300000 km/s) must move Into The Past to enable this coherence occurrence- and that tells clearly- the travel through the time is possible and fact
BUT
Can the matter moves into its past as the light does? NO
Why?? Because
We know the light can move simply in any direction (+ x, + y, + z, + t) by that the light can move into the future and can move into the past BUT
The matter creation depends on A Motion In A Defined Direction-
let's remember this idea
Neptune diameter =49528 km because Neptune velocity is 5.4 km/s
(This Fact Is Proved By My Planet Diameter Equation)
Now, Neptune velocity is a motion in a defined direction
(for example a motion in +x direction)
The energy moves in this direction (+x direction) and because of this motion Neptune matter is created and Neptune diameter is defined- now if the energy moves in (opposite direction "–x direction") that will change Neptune diameter or cause to perish its matter at all
Means- as long as – Neptune is found- that means – the energy moves in one direction (and not two directions) – for that Neptune can move into the future but can NOT move into the past.    
Notice
The matter can not move into the past but the light can do that-
Means- we have the time machine already- we need to know how to send the light into the past and by that we can have photos from the past events- and this will be The Time Machine
The Hypothesis Proves
I-7 The Proves Logic Analysis
I-8 Planet Velocity Is A Function In A Speed = (1.16 million km /s)
I-9 Planets Orbits Are Defined By A Motion Its Speed = (1.16 million km /s)
I-10 Jupiter distances are defined by a motion by a speed = (1.16 million km /s)
I-11 The Solar System Geometrical Design Proves The Hypothesis
I-12 The Solar System Distances Analysis Prove The Hypothesis
I-13 Deep Analysis For The Planets Orbits
1-14 Light defines each planet orbital period
I-15 Can Planet Diameter Be Used As A Period Of Time?
I-16 Mercury Orbit Analysis
I-7 The Proves Logic Analysis
Why can we prove that, a light beam its speed 1.16 million km per second is found in the solar system? also, the theory tells this light beam energy is consumed and the rest energy is found in one light beam its speed 300000 km/s (the known speed of light), if this light energy is consumed, how can we prove its existence?
There are two major reasons, which are
The Planets Orbits Are Created Before Any Planet Creation- And These Orbits Are Created Based On One Motion- And This One Motion Is Done By A Speed 1.16 Million Km Per Second.
The Planets Matters Are Created Based On Their Orbits – means- the planet is similar to a tree and the orbit is similar to a ground and the tree is planted in the ground-
NOTICE
after the planet creation, the planet can migrate from its original orbit to any other orbit - as Mars and Pluto did and that will not cause to destroy the planet. 
Shortly-
the planet matter and data is created based on this planet orbit- the orbit is defined before any planet creation and based on the orbit the planet matter and data is created (we remember- the space is similar to the sea of water and the planet matter is similar to a whirlpool found on this sea page- that tells the whirlpool is created based on its place in the sea of water)
Shortly- The Planet Matter Is Created Depends On This Planet Orbit
The speed 1.16 million km per second is registered in the planets orbits because the orbits are created from the energy of the light beam (1.16 million km per second), and the planet matter is created from this planet orbit (energy)
Shortly
The light beam (1.16 million km per second) is the source of energy for (everything) in the solar system-
All orbits are defined by its energy, all matters are created by its energy, and all motions are done by its motion-
Can we prove this light beam is a fact? YES we can
The analysis for any data or any motion will discover this light beam because it's the source of energy for everything
Shortly
the light beam (1.16 million km per second) is The Source Energy of the solar system
The mother of all children can be discovered by analysis these children data 
A QUESTION
Can the solar system design uses a rate 1.16 and I can't understand that but wrongly consider this rate (1.16) as a speed of light 1.16 million km per second?
NO- this can't be possible – Because
The light beam (1.16 million km per second) behaves typically to the known light beam (300000 km/s) – as we will see in the data discussion
I-8 Planet Velocity Is A Function In A Speed = (1.16 million km /s)
DATA
My 5th equation (v1v2=322)- the planets velocities prove it–let's see that in following  
322 = 47.4 km/s (Mercury velocities)  x 6.8 km/s  (Uranus velocities)                    
322 = 35 km/s  (Venus velocity) x 4.7 km/s (Pluto velocity) x 2             
322 = 29.8 km/s (the Earth velocity) x 5.4 km/s (Neptune velocities) x 2      
322 = 24.1 km/s (Mars velocity) x 13.1 km/s (Jupiter velocity)               
322 = (17.9 km/s)^2 (Ceres velocity) (Max error 2%)
DATA ANALYSIS
The previous data tells the planets velocities are defined by three features
(1st Feature)
The planets velocities are complementary one another –means - each planet velocity is complementary with another planet velocity– means– The planets velocities are defined in pairs and not in single planets. 
(Notice, the inner planets orbital inclinations are defined by the rule (v1/v2), for example, Mercury orbital inclination 7 deg = Mercury velocity 47.4/ Uranus velocity 6.8 that proves the effect of the rule (v1v2=322) on the planet motion)
Ceres velocity tells the idea - Ceres is used as the main point - as a result the outer planets be complementary with the inner planets – for that the rule (v1v2=322) controls the planets velocities- that means- The planets velocities are created based on One Design- Ceres velocity is used as the main point for this design
(2nd Feature)
Why the constant is 322? because 1160000 seconds = 322 hours – means- there's speed of light = 1.16 million km /s - Shortly
Mercury (47.4 km/s) moves during 6.8 hours a distance             = 1160000 km 
Uranus (6.8 km/s) moves during 47.4 hours a distance               = 1160000 km  And
Venus (35 km/s) moves during 2 x 4.7 hours a distance             = 1160000 km 
Pluto (4.7 km/s) moves during 2 x 35 hours a distance               = 1160000 km 
Earth (29.8 km/s) moves during 2 x 5.4 hours a distance             = 1160000 km 
Neptune (5.4 km/s) moves during 2 x 29.8 hours a distance        = 1160000 km  And
Mars (24.1 km/s) moves during 13.1 hours a distance                = 1160000 km 
Jupiter (13.1 km/s) moves during 24.1 hours a distance             = 1160000 km  And
(Notice - Saturn (9.7 km/s) moves during 33.2 hours a distance = 1160000 km  - (between 33.2 and Venus velocity 35 km/s the error 5%)) (Data Max error 2%)
The Data Proves, The Planets Velocities Are Functions In The Speed 1.16 Million Km Per Second. That proves the speed (1.16 million km per second) is A Fact
(notice the planets velocities are complementary one another also based on the known speed of light 300000 km/s, the paper provides this data) 
(3rd Feature)
The planets velocities limit depend on the known speed of light 300000 km/s
Let's explain that in following
The 9 planets velocities total is 176 km/s (I add the Earth moon velocity 29.8 km/s)
The 10 planets velocities total is 205.8 km/s
300000 km = 7.1 x (205.8)^2
The speed 297000 km/s (99% speed of light) causes Lorentz length contraction effect with the rate 7.1
The velocity (205.8 km/s) moves during 205.8 seconds a distance 42253 km
Where 300000 = 7.1 x 42253 km BUT 42253 = (205.8)^2
The squared value (205.8)^2 is found because of the used rate of time
We have studied this equation in point (I-5**) -the data shows, the planets velocities are defined as parts of a complete system of velocities starts from (Zero = stationary point) and reaches to the speed of light 300000 km/s and between these two values the planets velocities are defined to support this same system- that tells- the planets velocities are defined with limit to the speed of light (300000 km/s) - The data proves the speed (1.16 million km per second) is a fact -and also the data proves the coherence is done between the light (1.16 million km per second) and the light (300000 km/s)
I-9 Planets Orbits Are Defined By A Motion Its Speed = (1.16 million km /s)
(1) Mercury Motion
During 310s light its speed (1.16 million km per second) travels 360 million km
During 310 s light known speed (300000 km/s) travels 93.1 million km
BUT
93.1 million km x 2π = 586 million (this value will be used by Venus as a period) 
Where 360 million km         = Mercury Orbital Circumference
(2) Venus Motion
During 586s light its speed (1.16 million km per second) travels 680 million km
During 586s light known speed (300000 km/s) travels 175.8 million km
BUT
175.8 million km x 2π = 1104 million (this value should be used by Earth as a period) 
680 million km            = Venus Orbital Circumference
(3) Earth Motion
During 810s light its speed (1.16 million km per second) travels 940 million km
During 810s light known speed (300000 km/s) travels 243 million km
243 million km x 2π = 1526 million (this value should be used by Jupiter as a period) 
Where 940 million km       = Earth Orbital Circumference
BUT
During 940s light its (1.16 million km per second) travels 1104 million km (error 1%)
That shows the direction reflection between the Earth and Venus because of the reflection of energy- I proved that in point no. (**)
Notice –
Jupiter is the next planet after the Earth based on the light motion design for that the Earth value (1526 million km) should be used by Jupiter because Mars is a migrant planet and Mars original orbit was between Mercury and Venus and the next planet for the Earth was Jupiter- the confusion in data is made by Mars migration effect
(More explanation is provided in the comment on the data)
(4) Mars Motion
(Mars Is Exceptional)
During 1235s light its speed (1.16 million km per second) travels 1433 million km
During 1235s light known speed (300000 km/s) travels 371 million km = 2π x 59 mkm Where 1433 mkm = Mars Orbital Circumference
(5) Jupiter Motion
During 4224s light its speed (1.16 million km per second) travels 4900 million km
During 4224s light known speed (300000 km/s) travels 1267 million km –
4900 mkm  =Jupiter Orbital Circumference
1267 million km x 2π = 7960 million km (this value be used by Saturn as a period) 
Notice
Mars is a migrant planet for that – the Earth value isn't used for Mars orbit- but it's used for Jupiter orbit- and because of the reflection between Venus and the Earth- the Earth produces the value directly (1526 million km) without using the light speed (1.16 million km per second) where
1526 million km = Jupiter Orbital Distance 778.6 million km x 2 (error 2%) 
Notice
During 4224s light its speed (1.16 million km per second) travels 4900 million km
4900 million km = Jupiter orbital circumference while 4222.6 hours = Mercury day period- if (one hour of Mercury = One second of light clock) that will connect Jupiter with Mercury strongly- this is a fact because- the solar system depends on Mercury clock in its motion and the planets orbits are defined based on Jupiter orbit after the planets migration- that makes Mercury and Jupiter the two heads of the solar system unified motion. 
(6) Saturn Motion
During 7960s light its speed (1.16 million km per second) travels 9007 million km
During 7960s light known speed (300000 km/s) travels 2388 million km
9007 mkm = Saturn Orbital Circumference
2388 million km x 2π =15004 million km (this value be used by Uranus as a period) 
(7) Uranus Motion
During 15559s light its speed (1.16 million km per second) travels 18048 million km
During 15559s light known speed (300000 km/s) travels 4668 million km
18048 mkm = Uranus Orbital Circumference
4664 million km x 2π =29305 million km (this value be used by Pluto as a period) 
Notice
The transported value from Saturn is 15004 but the used value is 15559 (error 3.5%)
(8) Neptune Motion
(Neptune is exceptional)
During 24348s light its speed (1.16 million km per second) travels 28244 million km
During 24348s light known speed (300000 km/s) travels 7305 million km
28244 mkm = Neptune Orbital Circumference
(9) Pluto Motion
During 31983s light its speed (1.16 million km per second) travels 37100 million km
During 31983s light known speed (300000 km/s) travels 9595 million km
37100 mkm  = Pluto Orbital Circumference
(10) The Earth Moon Motion
During 639s light its speed (1.16 million km per second) travels 724 million km
During 639s light known speed (300000 km/s) travels 191.6 million km = 2π x 30.5 mkm – BUT  
30.5 mkm     = 88000 km x 346.6 days
The moon displacements total during 346.6 (solar days) = 30.5 mkm
346.6 solar days= The nodal year and  88000 km     = The moon displacement daily
742 mkm = The distance is passed by Uranus in 30589 hours -  The data tells, the moon orbit regression be done by effect of Uranus motion.
THE COMMENTS ON DATA
(1)
We should note that, the data follows the rule perfectly- as we see in Mercury and Saturn data – the confusion in data is found by the planets migration – let's prove that
680 mkm (Venus Orbital Circumference) x (1.16 mkm/s) ^2 = 940 mkm
28244 mkm (Neptune Orbital Circumference) x (1.16 mkm/s) ^2 = 37100 mkm
(Max error 2.5 %)
940 mkm = Earth Orbital Circumference
37100 mkm = Pluto Orbital Circumference
Clearly the confusion of data is done for the Earth and Jupiter (Mars migration effect) and for Pluto and Neptune and Uranus (Pluto migration effect)
Shortly
The light (1.16 million km per second) created the solar system distances based on one another as the chess board distances- perfectly the light created the distances based on one geometrical design and as one network- But – The planets migration caused confusion for the data- by that the planets orbits data is confused and no longer be seen as designed by the light motion- specially because the solar system design repair needed to make Jupiter orbit as the central orbit based on which all planets orbits are modified- by that– the discovery for the light motion effect on the solar system distances creation needed deep analysis in data to remove the confusion.
Notice
The Earth data produced the value (1526 mkm) and this distance is used by Jupiter as a distance (1526 mkm = 2 x 778.6 mkm Jupiter Orbital Distance) (error 2%)
And
Uranus data produced the value (29305 mkm) and this distance is used by Neptune as a distance (29305 mkm= 28244 mkm= Neptune Orbital Circumference) (error 4%)
The behaviors are typical tell that by the same effect the modifications of both planets data are done- 
Notice
680 sec x 1.16 million km /sec = 789 mkm (Jupiter orbital distance 778.6 mkm error 1.3%) – the data shows – Jupiter is the mentioned planet after the Earth because Mars original orbit was between Mercury and Venus by that the light motion moved from the Earth to Jupiter directly- Mars is not seen in this motion-
(2)
The inner planets distances ( 93.1, 175.8, 243, 370.6) can be used as cycles periods
175.8 solar days =Mercury day period
243    solar days = Venus rotation period
370.6 solar days are near to 365.25 days (error 1.5%),
(93.1 days x 2π= 584 days =the period of periodical meeting of Earth and Venus)
This equality depends on the rate 1mkm = 1 day
That  tells each planet creates its PREVIOUS NEIGHBOR CYCLE PERIOD
And the outer planets distances in blue color (1267, 2330 , 4664, 7305, 9595)
2330 = 2 x 1165             = 2π x 371
4664  = 4 x 1165             = 4π x 371
7305 = 2π x 1165           =2π2 x  371
9595 = 8 x 1165            = 8 π x  371                                                 (error 3%)
This data cornerstone is the number (371), (the Earth year 365.25 days)
The data refers to the Earth year because of the Earth effect on the sun creation
NOTICE
The data proves each planet orbit is defined based on its neighbor – my first equation (Planet orbital distance equation) proves this fact –
In following I put my planet orbital distance equation for revision
Planet Orbital Distance Equation
(My First Equation)  (d)2 = 4 x d0 x (d- d0)  
d = A Planet Orbital Distance
d0= Its Direct Previous Neighbor Planet Orbital Distance
The equation depends on the planets order, for that , just 2 neighbor planets can be used in this equation, means if (d is Venus distance, d0 be Mercury distance) 
The equation exceptions are,
Earth depends on Mercury Not Venus – and Mars depends on Venus Not Earth And Pluto depends on Uranus Not Neptune
Note, we don't use the forma (d=2d0) instead we use the forma (d2 = 4d0 (d-d0)) because it uses the distance between the 2 planets and that decreases the errors
Let's test the equation
(1) Venus Motion
(108.2)2 = 4 x 57.9 x (50.3)                                        
d= 108.2 million km  = Venus Orbital Distance
d0= 57.9 million km    = Mercury Orbital Distance
50.3 million km          = The Distance Between Venus And Mercury 
Venus Depends On Mercury
(2) Earth Motion
(149.6)2 = 4 x 57.9 x (149.6-57.9)                                                  (error 2.8%)
d= 149.6 million km  = Earth Orbital Distance
d0= 57.9 million km   = Mercury Orbital Distance
Earth depends on Mercury and doesn't on Venus 
(3) Mars Motion
(227.9)2 = 4 x 108.2 x (227.9-108.2)                          
d= 227.9 million km   = Mars Orbital Distance
d0= 108.2 million km = Venus Orbital Distance
Mars depends on Venus and doesn't on Earth 
(4) Ceres Motion
(415)2 = 4 x 227.9 x (415-227.9)                      
d=  415  million km      = Ceres Orbital Distance
d0=  227.9 million km = Mars Orbital Distance
Ceres depends on Mars
(5) Jupiter Motion
(778.6)2 = 4 x 415 x (778.6- 415)                     
d= 778.6 million km = Jupiter Orbital Distance    
d0= 415 million km = Ceres Orbital Distance
Jupiter depends on Ceres
(6) Saturn Motion
(1433.5)2 = 4 x 778.6 x (1433.5- 778.6)           
d = 1433.5 million km = Saturn Orbital Distance    
d0  = 778.6 million km = Jupiter Orbital Distance
Saturn depends on Jupiter
(7) Uranus Motion
(2872.5)2 = 4 x 1433.5 x (2872.5- 1433.5)                  
d= 2872.5 million km = Uranus Orbital Distance    
d0 = 1433.5 million km = Saturn Orbital Distance  Uranus depends on Saturn
(8) Neptune Motion                                                                          (error 4%)
(4495.1)2 = 4 x 2872.5 x (4495.1- 2872.5)
d= 4495.1 million km = Neptune Orbital Distance    
d0 = 2872.5 million km = Uranus Orbital Distance     Neptune depends on Uranus
(9) Pluto Motion
(5906)2 = 4 x 2872.5 x (5906- 2872.5)
d= 5906 mkm = Pluto Orbital Distance    
d0 = 4495.1mkm = Neptune Orbital Distance     Pluto depends on Uranus
Notice the error is less 1% for all planets except (Earth 2.8%) and Neptune (4%)  
The Equation Discussion
(a)
The Equation tells each planet orbital distance depends on its previous neighbor planet orbital distance – but – there are 3 exceptions which are –
Earth depends on Mercury not Venus –
Mars depends on Venus not Earth–
Pluto depends on Uranus not Neptune–
(b) 
The equation shows – the distance from the sun to Pluto be distributed based on one geometrical design – means – the distances be created together as one group in one a network form – the distances be similar to the chess board distances- they are distributed geometrically and in one network based on one design -
Shortly
No Single Distance be Created independently or individually – We deal with one network of distances - 
Means
By Using Mercury Orbital Distance (57.9 million km) (one data) We Can Conclude All Planets Orbital Distances (9 Data) By Using Mathematical Calculations Only
(c)
Kepler stated (Planet orbit defines its velocity) – this concept is used in my third equation (d1/d2) = (v2/v1)2 where  d= Planet Orbital Distance and v = Planet Velocity
The concept tells– If we know a planet orbital distance, we can conclude its velocity by mathematical calculations only    
Shortly
By Using my 1st equation (d2 = 4d0 (d-d0)) and kepler law and the One Data (Mercury orbital distance = 57.9 million km) we can conclude by mathematical calculations only All Planets Orbital Distances, Velocities And Periods (27 Data)
That proves the concept (Planet data be created based on exact equations)
Planet Orbits Are Defined By Very Accurate System
Each planet orbit is defined based on an angle, these angles are reflected also – let's prove that  (I suppose –There's a right triangle by the three points The Sun, Mercury and Venus) - Now
Venus angle is (61 degrees) because Venus orbital distance (108.2 mkm) x cos (61) = Venus Mercury distance (50.3 mkm) -
Here we can replace Venus with any other planet in the same triangle to define this planet angle based on similar calculation – as a result
Earth angle is (51 degrees) because Earth orbital distance (149.6 mkm) x cos (51) = Earth Mercury distance (91.7 mkm)
Mars angle is (41.7 degrees) because Mars orbital distance (227.9mkm) x cos (41.7)= Mars Mercury distance (170 mkm)
Jupiter angle is (22.2 degrees) because Jupiter orbital distance (778.6 mkm) x cos (22.2)= Jupiter Mercury distance (721 mkm)
Similar to that – Saturn angle is 16.5, Uranus angle is 11.6 deg, Neptune angle is 9.2 deg and Pluto angle is 8 deg- these angles follow the same system – for example
Pluto angle is (8 degrees) because Pluto orbital distance (5906 mkm) x cos (8)= Pluto Mercury distance (5848 mkm)
NOTICE No. (1) The right angle and its triangle is (a hypothesis) – we Can prove it because (v1/v2) = (θ1/ θ2)
means – these angles are rated with their planets velocities – for example
(Neptune velocity 5.4/ Pluto velocity 4.7) = (9.2 deg /8 deg)
Shortly -the angles which are defined based on the sun perpendicularity on Mercury orbit – all of them- are the correct angles by which the planets orbits are defined – that because the planets velocities are rated with these angles and Kepler stated (Planet orbit defines its velocity)- means- the planets orbits are defined based on these angles and that causes the angles rates to be equal with the velocities rates - Shortly -That tells indeed the sun position is perpendicular on the (inner planets orbits) – in fact – the sun is perpendicular on the Earth moon orbit- and this perpendicularity has effect on all inner planets because of the small distances among them. 
I-10 Jupiter distances are defined by a motion by a speed = (1.16 million km /s) Data
(1)
(1.16 million km /s) x 300 sec   = 348 mkm (300 mkm = Earth orbital distance x 2)
(1.16 million km /s) x 348 sec   = 470 mkm (470 x2 = Earth Orbital Circumference)
(1.16 million km /s) x 470 sec   = 551 mkm                       (Mars Jupiter Distance)
(1.16 million km /s) x 551 sec   = 629 mkm                       (Earth Jupiter Distance)
(1.16 million km /s) x 629 sec   = 721 mkm                       (Mercury Jupiter Distance)
(2)
(1.16 million km /s) x 108.2 sec x 4 = 500 mkm        (108.2 = Venus orbital Distance)
(1.16 million km /s) x 500 sec   = 580 mkm                      
(1.16 million km /s) x 580 sec   = 671 mkm                       (Venus Jupiter Distance)
(1.16 million km /s) x 671 sec   = 778.6 mkm                    (Jupiter Orbital Distance)
(1.16 million km /s) x 778.6 sec x 2    = 1806 mkm
(1.16 million km /s) x 1806 sec           = 2094 mkm          (Jupiter Uranus Distance)
(1.16 million km /s) x 2094 sec           = 4900 mkm/2  (Jupiter Orb. Circumference)
(3)
(1.16 million km /s) x 5127 sec = 5906 mkm                    (Pluto orbital Distance)
(1.16 million km /s) x 4437 sec = 5127 mkm                   (Pluto Jupiter Distance) 
(1.16 million km /s) x 3825 sec = 4437 mkm                   (Mercury Neptune Distance)
(1.16 million km /s) x 3244 sec = 3825 mkm  (=π x 1205 mkm Mars Saturn Distance)
(1.16 million km /s) x2872sec=3244mkm (=2x1622 mkm Uranus Neptune Distance)
(1.16 million km /s) x4900sec=2 x 2872 mkm (Uranus Orbital Distance)
(4)
(1.16)2 x 170 sec             = 227.9 mkm                            (Mars Orbital Distance)
Where 170 mkm = Mercury mars Distance
(5)
(1.16 million km /s) x 1980 sec           = 2296.8 mkm
(1.16 million km /s) x 2296.8 sec        = 2644.6 mkm       (Mars Uranus Distance)
(1.16 million km /s) x 2644.5 sec        = 3033.5 mkm       (Uranus Pluto Distance)
1980 million km = the orbital circumferences total of (Mercury + Venus + Earth)
(6)
(1.16 million km /s) x 3717 sec           = 4310 mkm          (Earth Neptune Distance)
(1.16 million km /s) x 4346 sec           = 5040 mkm          (Jupiter Pluto Distance)
3717 mkm = Jupiter Neptune Distance –
(Earth Neptune Distance 4345mkm "error 1%" and Jupiter Pluto dis. 5127 mkm error 1.7%)
Discussion - the data tells the idea clearly, it tells 
The distances in the solar system is created together based on one design and by one motion- this one motion is the light motion (1.16 million km per second) and the light creates the distance and after that the light uses the created distance as a period of time to create another distance, and by that, the light created all distances in one network together based on one geometrical design and this creation of the distances is done before any planet creation- the data clearly and strongly proves the hypothesis. 
NOTICE - The total distances in the solar system (the orbital and inner distances) are 45 distances, the previous data used almost 50% of these distances (because many distances are equal in the solar group – for example – (Saturn orbital distance = Mars orbital circumference)- this distances equality makes the previous data behave in place of around 50% of all distances- and no logic to suppose these all distances are rated by the way with the rate (1.16)!!
The logical explanation is my theory I have explained- the light (1.16 million km per second) creates the distances based on one another by using the distances as periods of time - Also this behaviors is typical to the behavior of the known speed of light (300000 km/s)– as we have seen before - During 2094 seconds the light (300000 km/s) moves 629 million km (=Jupiter Earth distance) where 2094 million km (= Jupiter Uranus distance)- Simply it's typical behaviors tells the fact that the speed 1.16 million km per second is real fact and used in the solar system design)   
I-11 The Solar System Geometrical Design Proves The Hypothesis
Data (1)
(A) (1.16/0.3) x 2π = 24.3
(B) 1.16 million km per second x 86400 seconds = 100733 million km
(100733 million km = The Planets Orbital Circumferences Total)
Data (2)
(a) 4224 x 1.16 =4900
(b) 100733 = π x 32200                                        
(c) 1.1318/0.3 = 5906 / (778.6 /2)  
Discussion
Data (1)
Data no. (A) - (1.16/0.3) x 2π = 24.3
By this equation the space and time are created- because it shows the coherence of light between the light (1.16 million km per second) and the light (300000 km/s)
The equation tells – the space is created in curves (2π) and the time is created in units each unit = (24 hours)
Shortly- the time essential units are 2 units (the second and 24 hours) because of the rate of time (one second of light clock = 24 hours of planet clock) by that the period of the (one second) (for light motion) is comparable with (24 hours) for planet motion that means- the period (24 hours) is one unit can't be divided and it's similar to the second period which is a unit can't be divided
Data no.(B) 1.16 million km per second x 86400 seconds = 100733 million km
The data tells the light (1.16 million km per second) moves in solar day (24 hours=  86400 seconds) a distance = 100733 million km = The Planets Orbital Circumferences Total - that proves the solar planets orbits creation is done by the motion of this light beam (1.16 million km per second) - the data proves the solar system design depends on this light motion.
Data (2)
Data no. (a) 4224 x 1.16 =4900
The data tells, the light (1.16 million km per second) moves in 4224 seconds a distance = 4900 million km = Jupiter Orbital Circumference
But – Mercury day period is 4222.6 hours (4224 hours approximately)
If (one second of light clock = one hour of Mercury clock), that will make the period (4224 s) as Mercury day period – and – we know that Mercury day period is the main period in the solar system because the sun rate of time is created based on it as I explain in the second and fourth hypotheses of this paper-
Shortly- while Mercury is the solar system head- Mercury day period is the main period in the solar system and this period is used for Jupiter orbital circumference because all planets orbits are defined based on Jupiter orbit after the planets migration- this fact is discussed in the third hypothesis is details – let's summarize it
Mars original orbit was between Mercury and Venus, and Pluto was the Mercury moon, and Pluto size was equal Mercury size- But- Mars and Pluto had migrated from their orbits- the planets migration caused serious risk for the solar system geometrical design- And Uranus provides a vertical effect on Jupiter to fix it in its orbit and prevent Jupiter to migrate with the migrant planets- after Jupiter be fixed in its orbit all other planets redefined their orbits according to Jupiter orbit – by that – Jupiter orbit be the most important distance in the solar system-  
Notice- later Uranus caused to create Saturn to support Jupiter role- Saturn creation is done after the Earth moon creation because the energy reflection caused this delaying  
The data shows how the solar system design depends on Jupiter orbit
Data no. (b) 100733 = π x 32200
32200 million km = the different distance between Pluto orbital circumference and Jupiter orbital circumference
100733 million km = The Planets Orbital Circumferences Total
The data supports the same idea- Jupiter and Pluto orbits create the general design of the solar system- because Jupiter is the main orbit in it and Pluto the last orbit.  
Data no. (c) 1.1318/0.3 = 5906 / (778.6 x 2)  where
5906 million km              = Pluto orbital distance
778.6 million km             = Jupiter orbital distance
1.1318 million km           = Jupiter motion distance per solar day
0.3 million km                = speed of light 300000 km/s
The data shows the distribution of Jupiter and Pluto orbits are in proportionality with speed of light (300000 km/s) and speed of (1.16 million km per second)
BUT the data shows Jupiter velocity daily (1.1318 million km per day) in place of the speed of light (1.16 million km per second) Why??
Another question asks (Why do all Jupiter distances depend on the speed of light 1.16 million km per second?) as we have seen in the previous proof No. (1-10)?
The story told the facts, Uranus provided effect on Jupiter and as a result Jupiter orbit be used as the main orbit in the solar system- BUT- what's this effect Uranus provided on Jupiter? What had happened really?
Uranus sent a light beam its speed (1.16 million km per second) to Jupiter for that Uranus velocity and Jupiter velocity both depends on the speed (1.16 million km per second)
Jupiter should move a distance 1.16 million km per solar day (24h) BUT Mars effect created more problems and caused Jupiter to use (Mars rotation period 24.6h) in place of the solar day and decreased the velocity with 2.5%
Uranus moves a distance 1.16 million km (in TWO solar days- error 1.3%)
The solar system basic design depends on (two seconds and not one second) as I explained in details in the fourth hypothesis of this paper- now – the system design uses two seconds in place of one second because Uranus moves the required distance 1.16 million in two days
Shortly – the force which is sent from Uranus to Jupiter was a light beam its speed 1.16 million km per second and by this force Jupiter helped the solar system and supported the planets in their orbits to prevent more migration in the solar system
I-12 The Solar System Distances Analysis Prove The Hypothesis
DATA (No. I)
50% Of All Distances In The Solar System Are Equal One Another (WHY?)
 (1)
Saturn Orbital Distance = Saturn Uranus Distance =1433 million km =
                                      = Mars Orbital Circumference 
                                      = Pluto Neptune Distance         (error 1.5%)
          = Pluto eccentricity Distance     (error 1.5%)
= Neptune Orbital Distance/π
= Uranus Orbital Distance /2
= Mercury Jupiter Distance x 2     
(2)
Neptune Orbital Distance     = Saturn Pluto Distance
Jupiter Pluto Distance          = Uranus Neptune Circumference
Earth Neptune Distance       = Mercury Saturn Circumference  (0.5%)
(3)
Jupiter Mercury Distance     = 2 Mercury Orbital Circumference
Jupiter Venus Distance        = Venus Orbital Circumference   (1.5%)
Jupiter Earth Distance          = Earth Orbital Circumference   (1.2%)
(Earth and Jupiter at 2 different sides from the sun)
(4)
Jupiter Mercury Distance     = Mars Orbital Distance x π      (0.6%)
Jupiter Uranus Distance       = Venus Jupiter Circumference  (0.8%)
Pluto Orbital Distance          = Earth Orbital Circumference x 2π
DISCUSSION
The data tells these distances must be created based on each other because all of them are parts in one design and one network- the data tells – it's impossible for these distances to be created univocally nor independently – but they are created by one motion based on one design and for one result. 
DATA (No. II)
(778.6/721)=(721/670)= (670/629)=(1433/1325)=(1284/1205)= (2872/2644)= 1.0725
These are distances measured in millions km – let's define them
778.6, 721, 670 and 629 are the distances between Jupiter and the sun, Mercury, Venus and the Earth respectively.
1433, 1325, 1284, 1025 are the distances between Saturn and the sun, Venus, the Earth and Mars respectively.
2872 and 2644 are the distances between Uranus and the sun and Mars respectively.
MORE DATA (No. I)
629 million km (The Earth Jupiter distance)= (1.0725)^2 x 551 million km (Jupiter Mars Distance)
4495.1 million km (Neptune Orbital Distance) =1.0725 x 2 x 2094 million km (Jupiter Uranus Distance)
5906 million km (Pluto Orbital Distance) = (1.0725)^2 x 5127 million km (Jupiter Pluto Distance)
5127 million km (Jupiter Pluto Distance)= (1.0725)^2 x 4437 million km (Mercury Neptune Distance)
2.574 million km (Earth motion distance daily) = 1.0725 x 2.4 million km (TheMoon Orbital Circumference)
DISCUSSION
These distances are rated each other with (1.0725) this rate is created by Lorentz length contraction effect (as I supposed and proved)- but – regardless this rate reason the question is – How can all these distances be effected by this rate together?
That can be possible only if (these distances are parts of one design and this design is effected by this rate as a result all distances be effected together)   
The data proves the distances are created together based on one design and the distances are effected together by the same one effect – shortly- these distance can NOT be independent from one another but they are one group created based on one design.
I-13 Deep Analysis For The Planets Orbits
The Light Uses Each Planet Orbital Period To Move A Distance = This Planet Orbit + All Previous Planets Orbits Total
DATA
(1)
14 x 24 x (300000 km/s)           = 100.8 million km = 2 x 50.4
(2)
35.76 x 24 x (300000 km/s)      = 258 million km = 149.6 + 108.2
(3)
58.1 x 24 x (300000 km/s)         = 418 million km = 149.6 + (2 x 108.2) + 58
(4)
109.3 x 24 x (300000 km/s)       =787 million km = 58+ 108+149.6 +2 x228 (error 2%)
(5)
687 x 24 x (300000 km/s)          = 4900 million km
(6)
687 x 24 x (300000 km/s)          = 4900 million km
(7)
1710 x 24 x (300000 km/s)        = 12312 million km = 28244/(1.16 x2)
(8)
4868 x 24 x (300000 km/s)        = 17600 million km x 2
(9)
9517 x 24 x (300000 km/s)        = 68522 million km = 2 x 18048 + 32400
(10) 
14413 x 24 x (300000 km/s)      = 103773 million km
DISCUSSION
The data shows the rule (Planet Orbital Period "days"/2π) x 24 x Speed Of Light (300000 km/s) = A Distance = This Planet Orbital Circumference + All Previous Planets Orbital Circumferences Total – let's prove this rule in following
(1) Pluto Data
90560 days (Pluto orbital period) /(2π) = 14413 days
14413 x 24 x 300000 km/s = 103773 million km
The planets orbital circumferences total is 100733 million km  
Between 103773 mkm and 100733 mkm the error is (3%)
Pluto follows the rule perfectly- the light passes a distance = Pluto orbital circumference + all previous planets orbital circumferences = the planets orbital circumferences total
(2) Neptune Data
59800 days (Neptune orbital period) /(2π) = 9517 days
9517 x 24 x 300000 km/s = 68526 million km = (2 x 18048) + 32400
The distance 2 x 18048 million km = all planets orbital circumferences total before Neptune
32400 mkm = 1.16 mkm/s x 28244 seconds 
28244 million km = Neptune orbital circumference
Neptune follows the rule perfectly but because of the energy reflection the speed (1.16 mkm/s) is used one additional time- clearly we see Neptune follows perfectly the rule   
(3) Uranus Data
30589 days (Uranus orbital period) /(2π) = 4868 days
4868 x 24 x 300000 km/s = 17600 million km x 2
18048 million km (Uranus Orbital Circumference) (error 2.5%)
Uranus follows the rule perfectly because Uranus orbital circumference =18048 mkm and all previous planets orbital circumferences total is = 18048 mkm
(4) Saturn Data
10747 days (Saturn orbital period) /(2π) = 1710 days
1710 x 24 x 300000 km/s = 12312 million km
Jupiter orbit (4900) + Saturn orbit (9000) = 14000 million km
Light (1.16 million km/s) x 12312 seconds = 14282 million km
Means
The value (12312) equal (Jupiter orbital circumference)+Saturn orbital circumference
But the reflection of energy uses the speed of light (1.16) to have effect on the data
That tells Saturn follows the rule
Notice
12312 sec x 1.16 mkm/s = 14282 mkm = 28244 mkm/2
28244 mkm = Neptune orbital circumference – that tells the confusion in Saturn data is done by Neptune orbit effect   
Notice
We see the speed of light (1.16 mkm/s) has effect on Saturn data by division (12312 = 14282/1.16) but in Neptune data we have seen the speed of light (1.16 mkm/s) has effect by multiplication (28244 x 1.16 = 32400)
That tells we have opposite positions between (Neptune and Saturn) and the light connects them together by one motion- 
The data tells simply (A x 1.16 and B/1.16) this is effect of one light beam motion through both points.
(6) Jupiter Data
4331 days (Jupiter orbital period) /(2π) = 687 days
687 x 24 x 300000 km/s = 4900 million km
Jupiter orbital circumference = 4900 million km
The distance equal Jupiter orbital circumference only without the previous planets BUT - The inner planets orbital circumferences total be = 4900 million km
Let's prove that
360 (Mercury) + 680 (Venus) +940 (Earth) + 1433 (Mars) = 3413 million km
4900 million km – 3413 million km = 1433 million km
That tells – the data supposes the Earth moon orbital circumference around the sun = Mars orbital circumference = 1433 million km
By that 360 + 680 +940 + 1433 + 1433 = 4846 million km = Jupiter orbital circumference (4900 mkm) (error 1%)
(7)Mars  Data
687 days (Mars orbital period) /(2π) = 109.3 days
109.3 x 24 x 300000 km/s = 787 million km = Jupiter orbital distance 778.6 million km  (error 2%)
778.6 million km= 57.9 mkm + 108.2 mkm + 149.6 mkm + 227.9 mkm+ 227.9 mkm
Means- Mars Value (787 = 778 = the four inner planets orbital distances total + the Earth moon orbital distance to the sun (which is considered = Mars orbital distance)
Here the value provided the distances total and not the circumferences total
But Mars follows the rule perfectly because
The value (778) = the 5 planets orbital distances total
(8)Earth Data
365.25 days (Earth orbital period) /(2π) = 58.1 days
58.1 x 24 x 300000 km/s = 418 million km = 149.6 mkm (Earth orbital distance) + 2 x 108.2 mkm (Venus orbital distance) + 57.9 mkm (Mercury orbital distance)
The Earth follows the rule- the modification can be done by the moon effect on the earth motion.
(9)Venus  Data
224.7 days (Earth orbital period) /(2π) = 35.76 days
35.76 x 24 x (300000 km/s)= 258 million km = 149.6 mkm  (Earth orbital distance)+ 108.2 mkm (Venus orbital distance)
(10)Mercury Data
88 days (Earth orbital period) /(2π) = 14 days
14 x 24 x (300000 km/s)  = 100.8 million km = 2 x 50.4  
50.4 million km = Mercury Venus Distance
The Comment On The Data
(1)
We notice a deep interaction between Mars and Jupiter where Jupiter orbital period (4331 days /2π)= 687 days (Mars orbital period)  
And Mars value (109.3 days) enables the light to pass a distance 778.6 mkm
109.3 x 24 x 300000 km/s = 778.6 million km (Jupiter orbital distance) 
That shows deep interaction between Mars and Jupiter which is logical behavior because Mars is a migrant planet and Mars created an interaction with Jupiter to enable Mars to stay in its New orbit and prevent any more migration.
(2)
Mars orbital period 687 days = 88 (Mercury) + 224.7 (Venus) + 365.25 (Earth)
(error 1.5%)
Notice - 551 mkm (Mars Jupiter distance) = 57.9 mkm (Mercury orbital distance) + 108.2 mkm (Venus orbital distance) + 149.6 mkm (Earth orbital distance) + 227.9 mkm (Mars orbital distance) (error 1.5%)
(3)
The data shows very important fact
The data tells that (The Light Motion Is The Main Player Behind All Data)
Let's use the sea water as example
The sea water motion is the main player behind the sea waves, the ship sailing, the fish swimming and the cause for any motion in the sea - Different forms of motions in the sea we can discover but the motion reason and motor is the same one reason and motor –  This is the useful result of this data- it's simply a major proof for my theory- the light motion is the reason behind all planets motions and data-
Notice - Why Is The Planets Data Analysis Method Important?
The planets data analysis makes some anatomy for the planets data, by that, we can know how this planet data is created and what geometrical reason caused to create this data- the planets data analysis also enable us to discover if a planet violates a rule used by the other planets- and it shows the geometrical reason behind this violation-
1-14 Light defines each planet orbital period
The light defines each planet orbital period based on this planet diameter
Data
142984 s x (0.3)^2 = 12868 = π x 4331 (error 5%)
120536 s x (0.3)^2 = 10747
51118 s x (0.3)      = 30589/2
49528 s x (0.3)^2   = 4457
7510 s x (0.3) x 4π^2 = 88945 (= 90560 error 1.8%) (notice 7510 x 4π^2 =296483)
6792 s x (0.3)^2    = 611
7510 s x (0.3)^2    = 676 = 687 (error 1.5%)
12756 s x (0.3)^2   = 1148 = π x 365.25
12104 s x (0.3)^2   = 1089 = (π^2)/2 x 224.7
4879 s x (0.3)^2    = 439 = (π^2)/2 x 88
Notice
7070 s x (0.3)^2    = 637 = 687 / 1.0725
Where
(1)
The left side data is the planets diameters, in details
142984 km, 120536 km, 51118 km, 49528 km and 7510 km are the diameters of (Jupiter, Saturn, Uranus and Neptune respectively and 7510km =Pluto circumference)
And
6792 km, 12756 km, 12014 km and 4879 km are the diameters of (Mars, Earth, Venus and Mercury respectively) – all diameters are used as periods of time with the rate (1 km = 1 second) - The periods are used by light known speed (300000 km/s)
(2)
The right side is the planets orbital periods
12868 = π x 4331 (error 5%) (4331 days = Jupiter orbital period)
10747 days = Saturn orbital period
30589 days = Uranus orbital period
90560 days = Pluto orbital period
Notice
4457 million km = Neptune orbital distance
That shows Neptune produced its orbital distance in place of its orbital period based on the same rule proves that Neptune is found on the opposite direction to the other planets.
687 days      = Mars orbital period (with 611 the error 12%)!
1148 days    = π x 365.25 days (Earth Orbital Period)
1089 days  = (π^2)/2 x 224.7 days (Venus Orbital Period)
439              = (π^2)/2 x 88 days (Mercury Orbital Period)
Notice
7070 s x (0.3)^2    = 637 = 687 / 1.0725
7070 km was Mars original diameter before its migration- and the rate 1.0725 is found by Lorentz length contraction effect.
 The Comment On The Data
The data shows the following
Light Motion Connects Each Planet Diameter With Its Orbital Period
The equation modifications can NOT refute the theory because the modifications depend on geometrical constant as (π), or depend on the using of (C) or (C^2)- these values can't be considered new values nor change the rule because they are geometrical constants which shows modifications are done for the energy- for example- the energy reflection causes to square the speed, by that, the planets which us (C) have no reflection of energy but the planets use (C^2) are suffered from the energy reflection- Shortly- the modifications can't refute the theory- means- the data tells – planet orbital period is defined based on this planet diameter by effect of the speed of light
I-15 Can Planet Diameter Be Used As A Period Of Time
DATA
Jupiter (13.1 km/s) moves during 10921 s a distance = 142984 km = Jupiter diameter
Uranus (6.8 km/s) moves during 7510 s a distance =51118 km = Uranus diameter
Pluto (4.7 km/s) moves during 10921 s a distance =51118 km = Uranus diameter
Pluto (4.7 km/s) moves during 51118 s a distance =2 x 102536 km = Saturn diameter
Pluto (4.7 km/s) moves during 2 x 120536 s a distance =1.1318 mkm
(1.13184 mkm = Jupiter motion distance per solar day)
Where
10921 km = The Moon Circumference 
7510 km   = Pluto Circumference
The data shows the planets diameters are used as periods of time (for planets motions) also and not only for light motion – the fact is proved simply
The Comment On The Data
(1)
My planet diameter equation proves that planet diameter is created as a period of time because the diameter is created as a function in this planet rotation period.
(2)
The previous data is example of many similar which proves the planet diameter is used as period of time.
(3)
How can the planet diameter be used as a period of time?
Planet diameter is used as a period to define another planet diameter-
The idea is that- the solar system is created from one motion (the original light beam motion)- by this one motion all planets diameters are created for that each planet diameter defines the next planet diameter.
(CONT)
Gerges Francis Tawdrous +201022532292
Physics Department-  Physics & Mathematics  Faculty 
Peoples' Friendship university of Russia – Moscow   (2010-2013)
Curriculum Vitae                  https://www.academia.edu/s/b88b0ecb7c
E-mail                            [email protected], [email protected]
                                      [email protected]                   
ORCID                          https://orcid.org/0000-0002-1041-7147
Facebook                        https://www.facebook.com/gergis.tawadrous
VK                                 https://vk.com/id696655587
Tumblr                           https://www.tumblr.com/blog/itsgerges 
Researcherid                   https://publons.com/researcher/3510834/gerges-tawadrous/
Google                                https://scholar.google.com/citations?user=2Y4ZdTUAAAAJ&hl=en
Livejournal                     https://gerges2022.livejournal.com/profile
Pocket                                                                     https://getpocket.com/@646g8dZ0p3aX5Ad1bsTr4d9THjA5p6a5b2fX99zd54g221E4bs76eBdtf6aJw5d0?src=navbar
PUBLICATIONS
box                                 https://app.box.com/s/47fwd0gshir636xt0i3wpso8lvvl8vnv
Academia                       https://rudn.academia.edu/GergesTawadrous
List of publications         http://vixra.org/author/gerges_francis_tawdrous
Slideshare                            https://www.slideshare.net/Gergesfrancis
0 notes
strangemusictriumph · 2 years
Text
UV LED Market - Forecast (2022 - 2027)
The market for UV LED is forecast to reach $1.2 billion by 2026, growing at a CAGR of 20.3% from 2021 to 2026. The UV LED Market is estimated to witness a sustainable growth over the forecast period majorly because of the environment friendly features for use in various applications. Rise in Environmental concerns is one of the major driving factors of UV LED Market in global level. Moreover, with the ongoing governmental regulations in global market for deploying energy-efficient lightings such as LED lightings, which tend to create a major impact in the rapid adoption of UV LEDs. 
Ultraviolet light occurs between the visible and x-ray spectrums. The Ultraviolet wavelength range is specified between 100 nm to 400 nm which categorizes UV LEDs into three different types. However, many photoelectric manufacturers also consider wavelengths as high as 430 nm to be in the UV range. The replacement of CCFL with LEDs made of Silicon Carbide, Gallium Nitride and other materials will drive the demand in UV Curing and medical phototherapy applications.
Tumblr media
UV LED Market Report Coverage
The report: “UV LED Market– Forecast (2021-2026)”, by IndustryARC covers an in-depth analysis of the following segments of the UV LED Market.
By Type – Ultraviolet A (UV-A), Ultraviolet B (UV-B) and Ultraviolet C (UV-C). By Wavelength Range – 430nm-315 nm (UV-A), 315nm-280 nm (UV-B) and 280nm-100 nm (UV-C). By Material – Indium gallium nitride (InGaN), Aluminium gallium indium phosphide (AlGaInP), Aluminium gallium arsenide (AlGaAs), Gallium phosphide (GaP), Silicon Carbide (SiC), Gallium Nitride (GaN) and Others. By Applications – UV Curing, Adhesive Coating, Lacquer Coating, Sterilization, Forensic Application, In-Line Coating, Counterfeit Detection, Sensing and Others. By End-Use Industries – Healthcare, Research, Industrial, Residential, BFSI, Security and Others. By Geography - North America (U.S, Canada, Mexico), Europe (Germany, UK, France, Italy, Spain, Russia, Netherlands and Others), APAC(China, Japan India, SK, Australia, Indonesia and Others), South America(Brazil, Argentina, Chile, Colombia and others), and RoW (Middle East and Africa).
Request Sample
Key Takeaways
The UV LED Market is estimated to witness a sustainable growth over the forecast period because of the rising environmental concerns for adopting eco-friendly lighting systems at various industries. 
The other factor responsible for the growth of UV LED Market are the various environmental friendly features it offers to the sterilization industry and different disinfection processes such as of water, air and different surfaces.
In addition, increasing safety concerns over water-borne diseases have brought an increase in people's awareness of consuming treated water. The growing awareness of the benefits of treated water consumption has impacted the applications UV LED that tend to propel its market growth.  
The scope for a UV LED is becoming abundant in sterilization applications, as it is being proved to be one of the cheapest way to provide safe drinking water across the globe. This safety benefits are expected to enhance the demand of UV LEDs in global market further uplifting its market growth.  
UV LED Market Segment Analysis - By Type
Ultraviolet C (UV-C) has dominated the UV LED Market with a share of 46.5% in 2020. In general, UV-C LEDs have wavelength range of 275 nm (280-100 nm) and they are available in different power levels and styles. Offering different operations in various industries, UV-C is available in different light sources such as single, chip-on-board and strip module of different specifications. Longer strip lengths with higher outputs is one of the widely used type. LED's have been increasingly used in applications where UV lamps (mercury, xenon, amalgam, excimer) have operated for decades. Improvements in UV-LED flux density, stability and life hours have made UV LEDs a viable solution for replacing traditional UV light sources such as mercury arc lamps, arch lamps, hot and cold cathode lamps and grid lamps. UV LEDs are more environment friendly as they do not contain harmful mercury, they do not produce ozone and consume less energy as well. These major advantages uplift the demand of UV LEDs, particularly using Silicon Carbide and Gallium Nitride materials which is expected to propel its market growth in forecast period. UV-C LED usage is rapidly growing in applications such as germicidal (UVGI) for air, surface and water purification.
Inquiry Before Buying
UV LED Market Segment Analysis - By End Use Industry
UV LEDs are widely used for different Healthcare and Sterilization applications and are projected to grow at a CAGR of 23.4%. UV LED Curing uses light-emitting diodes which convert electrical current into light. When the electrical current flows through an LED, it gives off ultraviolet radiation. The ultraviolet light causes chemical reactions in the molecules within the liquid, forming chains of polymers until the liquid becomes a solid. This process is a new technology which was designed to provide solutions to many of the issues found in traditional UV curing and heat-set drying. UV LED curing offers all the benefits of traditional curing, and also provides solutions to the negative environmental impact. This new technology reduces heat radiation and offers instant on-and-off switching. UV LED curing also does not require the use of moving parts which further reduces the amount of energy required. All these advantages tend to boost its demand in Healthcare and Purification industries which uplift its market growth.
UV LED Market Segment Analysis - By Geography
Asia-Pacific accounts for being the highest market at 34.6% in 2020. The market growth in this region is predominantly rising due to leading economies such as China, India, Japan and Others. As Asia-Pacific region holds the largest population and is covered by largest ocean, the demand for freshwater has been high at different industrial as well as residential sectors. Thus, the demand for water sterilization and purification processes is of great extent. This demand enhances the market growth of UV LED in this region. According to World Bank Reports, investments done in water and sanitation in Asia-Pacific region is highest and has been increasing rapidly from $50M to $910M in recent years. These tend to propel the market growth of UV LEDs using Silicon Carbide and Gallium Nitride materials in forecast period as freshwater demand will always be high. Asia-Pacific is closely followed by North America in the UV LED Market growth due to presence of major market players in this region which provides technology upgrades in UV LEDs.
Schedule a Call
UV LED Market Drivers
Rise in Environmental concerns drives market growth
With the rising Environmental concerns at global level, the adoption of UV LEDS for various applications in different industries tend to drive its market growth. LED's have been increasingly used in applications where UV lamps (mercury, xenon, amalgam, excimer) have operated for decades. Improvements in UV-LED flux density, stability and life hours have made UV LEDs a viable solution for replacing traditional UV light sources such as mercury arc lamps, arch lamps, hot and cold cathode lamps and grid lamps. With the rising Environmental concerns, the adoption of UV LEDs came into play. UV LEDs are more environment friendly as they do not contain harmful mercury, they do not produce ozone and consume less energy as well. These major advantages uplift the demand of UV LEDs which is expected to propel its market growth in forecast period. UV-C LEDs is rapidly growing in applications such as germicidal (UVGI) for air, surface and water purification. UV LED curing provides solutions to the negative environmental impact as it offers improved flux density, stability and long-life hours which makes UV LEDs a viable solution for replacing traditional UV light sources such as mercury arc lamps, arch lamps, hot and cold cathode lamps and grid lamps which drives its market growth in the forecast period.
UV LEDs offers compactness and long durability
UV LEDs do not contain toxic mercury and are often found in CCFL technology. They are much smaller and more durable than CCFLs and are more resistant to vibration and impact, resulting in less product breakage and reduced waste and maintenance expense as well. These advantages tend to drive its market growth in forecast period. The overall heat generated by the UV LEDs is considerably low. The UV LED lamps based on Silicon Carbide and Gallium Nitride materials reaches a maximum of 40 degree Celsius, whereas mercury lamps heat up to more than 60 degree Celsius. Low-pressure germicidal lamps which are traditionally used in these applications are typically associated with lifetime claims of 8000 to 10,000 hours. As a solid-state device, UV-C LEDs can be cycled on/off tens of thousands of times with little or no observable difference or degradation in performance. UV-C LEDs also offer a near-instant capability to provide full rated output, requiring no warmup time which makes it available for 25,000 to 100,000 hours. These advantages tend to drive its market growth in global market.
Buy Now
UV LED Market Challenges
High Installation Cost
One of the major challenges faced by UV LED Market globally is the high installation cost. UV LEDs are comparatively costlier than other alternatives. This tend to restrain its demand of UV LEDs thus bringing major challenge in its market growth. Several other challenges have been expected to hinder the market growth by hampering the adoption of UV LEDs using Silicon Carbide and Gallium Nitride materials, specifically for those in the UV-B (280nm – 315nm) and UV-C (100nm-280nm) spectral regions. LED manufacturers are struggling to improve the light output and efficiency while at the same time increases the reliability and useable life of the LED. Improvements are being made, but this has brought an exponential rise in the overall cost of these UV LEDs. This brings a major challenge in the market growth of UV LEDs in forecast period.
UV LED Market Landscape
Product launches, acquisitions, and R&D activities are key strategies adopted by players in the UV LED Market. The UV LED Market is dominated by major companies such as Lumileds Holding BV, Nordson Corporation, Seoul Viosys Co.Ltd., Honle UV America Inc., LG Innotek Co. Ltd, Halma Plc, Heraeus Holding Gmbh, Hnle Group, OSRAM, Koninklijke Philips N.V., Crystal IS, Sensor Electronic Technology, Phoseon Technology.
Acquisitions/Technology Launches/Partnerships
In January 2021, Sensor Electronic Technology (SETi) and Seoul Viosys, the leading global providers of UV LED technology and subsidiaries of Seoul Semiconductor, partnered together to launch their new Violeds technology that can quickly and effectively kill 99.437% of SARS-CoV-2 in less than one second. The testing was conducted in December 2020 through KR Biotech, a South Korea-based research institute specializing in sterilization testing of the new coronavirus.
In January 2021, OSRAM launched their new portable UV-C air purifier that fight against viruses and bacteria in this pandemic situation of Covid-19. The invisible, ultraviolet light destroys viruses and bacteria with a reliability of 99.9 percent.
For more Electronics Market reports, please click here
2 notes · View notes
researchrealmblog · 2 months
Text
Why will RF Semiconductor Usage Shoot Up in Asia-Pacific in Future?
The burgeoning sales of smartphones in both developed and developing countries are driving the demand for radio frequency (RF) semiconductors across the world. Emerging economies such as India, Pakistan, China, Nigeria, and Indonesia are witnessing a sharp surge in smartphone usage, on account of the rising internet penetration, soaring disposable income of people, and increasing urbanization rate. According to the Global System for Mobile Communications Association’s Mobile Economy 2020 report, in APAC, smartphone usage will rise from 64% of the total population to 81% from 2019 to 2025.
Tumblr media
The other major factor driving the expansion of the RF semiconductor market is the growing adoption of the internet of things (IoT) technology in various operations. IoT assists in building an interconnected framework of physical things such as smart systems through secure networks with the help of RF technologies. For instance, RF transceivers are incorporated in smart home systems for connecting with the internet using Bluetooth or Wi-Fi. In addition to this, the surging number of smart city projects in various countries is also augmenting the requirement for smart devices.
Besides, the rapid technological advancements being made in wireless communication are also fueling the sales of RF semiconductors across the world. Due to these factors, the revenue of the market will surge from $2.1 billion in 2019 to $5.0 billion by 2030. According to the estimates of the market research company, P&S Intelligence, the market will advance at a CAGR of 8.8% from 2020 to 2030. Gallium arsenide (GaAs), indium phosphate (InP), silicon (Si), silicon-germanium (SiGe), and gallium nitride (GaN) are the most commonly used types of RF semiconductor materials.
Out of these, the demand for GaAs RF semiconductors was found to be the highest during the last few years, primarily due to their less power dissipation, lower power consumption, high efficiency, and high voltage and temperature tolerance than the other RF semiconductors. Power amplifiers, low-noise amplifiers (LNA), switches, tuners, and filters are the main components used in RF semiconductors. Out of these, the demand for power amplifiers was observed to be the highest in 2019.
This was ascribed to the fact that power amplifiers are one of the essential components of telecommunication and consumer electronic devices. Moreover, the surging demand for tablets, smartphones, laptops, surveillance systems, gaming consoles, IoT devices, and networking equipment and the increasing infrastructural development activities are propelling the sales of power amplifiers. Across the world, the demand for RF semiconductors was the highest in the Asia-Pacific (APAC) region in the years gone by.
This trend is also predicted to continue in the forthcoming years, mainly because of the growing usage of wireless communication devices, soaring popularity of the IoT technology, burgeoning requirement for video streaming, and rapid digitization of various business operations in the region. On the other hand, North America is expected to be the fastest growing region in the RF semiconductor market in the upcoming years, mainly because of the increasing internet penetration and surging adoption of the 5G technology in the region.
Hence, it is safe to say that the demand for RF semiconductor will surge sharply in the coming years, primarily because of the increasing usage of smartphones, growing 5G deployment, and soaring adoption of the IoT technology across the world.
1 note · View note
rohitpalan · 3 months
Text
Bright Horizons: Navigating the LED Lights Market Surge with a 16.2% CAGR Through 2023
The global LED Lights market is forecast to expand at 16.2% CAGR over the estimated time period, as per FMI’s analysis. The industry’s size is predicted to reach a market value of US$ 87,242.8 Million in 2023. LED lights market to reach US$ 392,675.9 Million by 2033.
The LED lights can be effectively integrated in living environments, thereby supporting the market demand for LED lights. Additionally, producers of LED lighting systems are focusing on reducing the price sans any change in the product quality.
Since homeowners are persistently striving to adopt eco-friendly practices, LEDs are becoming the choice of product. LEDs are recyclable and don’t possess mercury. Besides houses, offices too are becoming a ubiquitous LED lighting applications.
Presently, in the business world, office management team is concerned about overall well-being of the employees. They are increasingly shifting to LED lights to make offices a brighter place for employees, thereby reducing eye-fatigue and better vision in the workplace. Overall, presence of bright light increases general comfort of employees.
Get an overview of the market from industry experts to evaluate and develop growth strategies. Get your sample report here  https://www.futuremarketinsights.com/reports/sample/rep-gb-4797
The primary investment to manufacture LED lights is high owing to the raw material it utilizes. Production of LED lights necessitates the use of superior quality semiconductor materials like gallium nitride, gallium arsenide, and indium phosphide. These materials are costly. In addition to this, LED lights utilize other materials like phosphors and electronic components, that are also fairly costly.
Top Highlights of LED Lights Industry: 
The North America LED lights industry acquired a market share of 29.8% in 2022.
The United States is projected to stand out on a global as well as regional scale over the forecast period. In 2022, the market share of the United States was 16.4%.
The Europe LED lights industry procured a market share of 23.2% in 2022.
The German LED lights industry is expected to obtain a market share of 9.8%.
The United Kingdom is expected to perceive a CAGR of 12.4% in the latest time-frame.
Within Asia Pacific, India and China are anticipated to observe noticeable growth over the estimated time-frame. India is expected to expand at 17.3% CAGR and China at 14.2% CAGR.
Under the product type category, lamps are projected to grab a market share of more than 57.8% in 2023.
Based on sales channel, convenience stores segment is estimated to have the maximum share surpassing 27.5% in 2023.
Speak to Our Research Expert https://www.futuremarketinsights.com/ask-question/rep-gb-4797
Stay Updated with Recent Developments:
Nichia, in January 2023, declared the inclusion of NVSW219C-V2 and NVSW719AC to its robust-power 3535-size profile of The NVSW719AC is a completely new LED that escalates the possibility of lighting design. NVSW219C-V2, in comparison, has an unparalleled color consistency through a dome-less structure.
Infineon Technologies AG and Nichia Corporation, in January 2023, declared the debut of first-ever completely integrated micro-LED light engine for HD adaptive driving beam applications.
GE Lighting unveiled its first collection of new pendants and ornamental light fixtures with an integrated LED lighting in December 2022. The new fixtures integrated with LED lighting have the capacity to be customized.
Market Segmentation:
By Product Type:
Lamps
Luminaries
By Sales Channel:
Modern Trade
Departmental Stores
Convenience Store
E-Commerce
Other Retail Format
By Application:
Residential
Office
Industrial
Shop/ Stores
Hospitality
Outdoor
Architectural
By Key Regions covered:
North America
Latin America
Europe
Asia Pacific
The Middle East and Africa
0 notes
casyoo · 3 months
Text
Material and Manufacturing Improvements Enhance LED Efficiency
Tumblr media
In theory, making high-brightness LEDs is easy. Just glue together n- and p-type semiconductors, add a small bias voltage, and stand back while the photons stream out. However, in practice these solid-state light sources are anything but simple. Advanced materials and manufacturing processes have come together to produce exotic devices with light outputs that would have been considered fanciful just half a decade ago.  Even though they produce impressive and highly efficient devices, the LED makers are not resting on their laurels. Leading LED companies such as Cree, OSRAM, and Seoul Semiconductor spend millions of dollars on material science and manufacturing technology to further enhance the performance of their products.  Contemporary high-brightness LEDs are already benefitting from advanced substrates and fabrication techniques, such as silicon carbide (SiC) and chemical vapor deposition (CVD), and tomorrow’s chips will take advantage of materials like patterned sapphire that are still percolating in the laboratory. This article takes a closer look at these materials and processes and assesses their impact on commercial LED performance.  Mind the band gap  Because the wavelength of the light emitted is a function of the energy band gap of the n- and p-doped semiconductor used to form the junction, engineers are limited in their choice of materials for fabricating LEDs. There is little point in selecting a semiconductor that emits photons that the eye cannot detect.  After many years of experimentation and hundreds of millions of research dollars, it turns out that Indium Gallium Nitride (InGaN) – a combination of Gallium Nitride (GaN) and Indium Nitride (InN) – is the best currently available semiconductor for high-brightness LEDs. The band gap of InGaN can be manipulated by altering the ratio of GaN to InN. The chips used at the heart of “white” LEDs, for example, emit photons in the 390 to 440 nanometer part of the spectrum (ultraviolet, violet-blue, and blue)1. These photons are then converted to white light by interaction with phosphor powder.  However, while InGaN has a number of advantages for photon generation, it does have some significant drawbacks from a volume manufacturing perspective. Chief among these is the fact that it is very difficult (and hence expensive) to “grow” InGaN ingots (unlike the silicon used for manufacturing integrated circuits (IC)). Ingots are advantageous for mass production because they can be sliced and processed as large wafers leading to lower cost chips.  Instead, manufacturers typically employ a much cheaper process whereby InGaN thin films are grown by a process known as epitaxy - the deposition of a crystalline overlayer on a crystalline substrate. There are several epitaxy techniques for forming the InGaN layer required for high-brightness LEDs, but the most common contemporary method is metal-organic CVD (MOCVD).  MOCVD is a complex process, but in basic terms, reactive gases are fed into a vacuum chamber and combine – at the atomic level – with the substrate and form a thin crystalline film.  During MOCVD, the crystalline structure of the deposited film attempts to orientate with the crystal structure of the substrate. The accuracy of this orientation depends on the similarity of the crystal lattice of each material. Poorly matched lattices result in a deposited film that while bulk crystalline on the macroscale is actually full of microscopic dislocations.  Reducing threading dislocations  A simplified schematic of the structure of a commercial high-brightness LED is shown in Figure 1.
The MOCVD process builds up the LED’s active regions – the multiple layers sandwiched between the p- and n-contact – by depositing successive thin films typically on a sapphire substrate. Sapphire has a number of advantages as a substrate for LED production: it is relatively inexpensive; it is used as a substrate for ICs so manufacturing processes are well established; it is very hard and durable, and it is a good insulator.  But there are some drawbacks. One such drawback is the mismatch in the coefficient of thermal expansion between sapphire and InGaN that can lead to high stresses and cracking of the fabricated die. However, an even bigger drawback is the relatively large mismatch between the crystal lattice of InGaN and sapphire (Figure 2). The mismatch – of around 14.8 percent – results in microscopic flaws in the InGaN thin film known as threading dislocations (Figure 3).
Figure 2: Lattice mismatch between sapphire substrate and InGaN thin film creates threading dislocations. (Courtesy of Cree.)
Figure 3: Threading dislocations in InGaN substrate.
Threading dislocations are a challenge in the drive to improve LED efficacy because recombinations between electrons and holes that occur at such sites are primarily “nonradiative.” In other words, no visible photon is emitted. This is because the dislocations introduce extra band gaps beyond the one that the designer intended, and hence do not correspond to the energy differential that produces a photon with a wavelength in the visible part of the spectrum.  Alternatively, the energy emitted in the recombination is transferred by the emission of a “phonon”, a vibration introduced to the crystal lattice that adds nothing to the chip’s luminosity but does generate unwanted heat. Because of the mismatch with the sapphire substrate, InGaN suffers from many threading dislocations, exhibiting typical densities exceeding 108 per cm2 or more.2 Worse yet, threading dislocations increase in number as the LED ages, further compromising luminosity (see the TechZone article “Understanding the Cause of Fading in High-Brightness LEDs”).  The drive for greater efficiency  Because of its fabrication advantages, the majority of manufacturers have been prepared to accept the threading dislocation compromise that comes with sapphire while improving their products’ efficacy by focusing on other aspects of LED performance.  LEDs such as OSRAM’s OSLON SSL, for example, can produce up to 108 lm/W (at 350 mA), a state-of-the-art performance, while fabricated on a sapphire substrate. In fact, over 90 percent of today’s high-brightness LEDs from most of the leading manufacturers are fabricated on sapphire substrates.3 As the efficacy returns from improving the other aspects of a LED’s performance – such as carrier injection efficiency, photon extraction, and phosphor conversion efficiency – begin to diminish, LED makers are turning their attention to alternative substrates.  One of those alternatives is silicon carbide (SiC). Like sapphire, SiC can be produced in bulk using fairly standard semiconductor manufacturing techniques. It also has the added advantage of a coefficient of thermal expansion that’s similar to InGaN, limiting stress buildup and die cracking. The primary disadvantages are high cost and patented manufacturing processes that require the payment of licensing fees.  Cree, a leading U.S.-based LED lighting maker, has – perhaps not surprisingly considering it owns many of the manufacturing patents – championed the use of SiC substrates for LED fabrication. The major advantage the material has over sapphire is a lattice structure that's much more closely matched to InGaN. By using SiC, the lattice mismatch with InGaN is reduced to 3.4 percent.4 This close matching is still not sufficient to eliminate threading defects completely (Figure 4), although the defect density is considerably reduced – by at least one and sometimes two orders of magnitude lower than sapphire5 – dramatically decreasing the number of sights for nonradiative recombination, improving efficacy and prolonging the life of the LED by slowing the rate of fading.
1 note · View note
reignnewgate · 9 months
Text
LED Chip Manufacturing Plant Setup
Light emitting diode (LED) chip is a small semiconductor device that emits light when an electric current passes through it. It is manufactured using materials like gallium nitride (GaN), gallium arsenide (GaAs), or indium gallium nitride (InGaN).
0 notes
samairablog12 · 11 months
Text
Epitaxy Deposition Market Size, Share & Trends Analysis Report
Global Epitaxy Deposition Market: Global Size, Trends, Competitive, Historical & Forecast Analysis, 2020-2025
Scope of Global Epitaxy Deposition Market:
The latest business intelligence report on the Epitaxy Deposition Market offers a comprehensive overview of the pivotal aspects pertaining to this industry vertical. It incorporates an accurate assessment of historical records, projections, growth drivers, opportunities, challenges, and restraints, among others.
Epitaxy deposition is a specialized technique used in the field of materials science and semiconductor fabrication. It involves the growth of a crystalline film or layer on a substrate with a well-defined crystal structure and orientation. Epitaxy deposition plays a crucial role in the development and production of advanced electronic devices, such as integrated circuits, optoelectronic devices, and high-performance transistors.
The scope of epitaxy deposition is broad and encompasses various applications and material systems. It enables the precise control of material properties, such as crystal structure, thickness, composition, and doping concentration. Epitaxy deposition techniques, such as molecular beam epitaxy (MBE) and metal-organic chemical vapor deposition (MOCVD), allow the growth of thin films with atomic-level precision, ensuring the desired material characteristics and performance.
In the field of electronics, epitaxy deposition is used to fabricate high-quality semiconductor materials, including silicon, gallium nitride (GaN), indium gallium arsenide (InGaAs), and other compound semiconductors. These materials serve as the building blocks for advanced electronic devices, such as transistors, light-emitting diodes (LEDs), laser diodes, and solar cells. By controlling the epitaxial growth process, researchers and engineers can tailor the properties of these materials to meet specific device requirements, such as enhanced electrical conductivity, improved light emission, and higher power efficiency.
Browse In-depth Market Research Report (300 Pages) on Epitaxy Deposition Market:
Epitaxy Deposition Market Companies:
Tokyo Electron
IQE
Applied Materials
Hitachi Kokusai Electric
Canon Anelva Corporation
ASM International
AIXTRON
LAM Research
Veeco Instruments
Others
Regional Insights:
The regions covered in this Global Epitaxy Deposition Market report are North America, Europe, Asia-Pacific, and Rest of the World. Based on country level, the market of Managed security service is subdivided into the U.S., Mexico, Canada, U.K., France, Germany, Italy, China, Japan, India, Southeast Asia, Middle East Asia (UAE, Saudi Arabia, Egypt) GCC, Africa, etc.
Global Epitaxy Deposition Market Segmentation:
By Product Type:
Homoepitaxy Deposition
Heteroepitaxy Deposition
By Application:
IDMs
Memory Manufacturers
Foundries
0 notes
siddhiblogpatil · 1 year
Text
Epitaxial Reactor Market Size, Emerging Trends, Technological Advancements, and Business Strategies 2023-2032
The global Epitaxial Reactor market was valued at US$ 1322.9 million in 2022 and is projected to reach US$ 2244.8 million by 2029, at a CAGR of 7.8% during the forecast period. The influence of COVID-19 and the Russia-Ukraine War were considered while estimating market sizes.
Get Full Report @ https://semiconductorinsight.com/report/epitaxial-reactor-market/
Epitaxial has been a primary application of Chemical Vapor Deposition (CVD). In semiconductor manufacturing, epitaxial processes are used to produce the perfect crystal layers needed to manufacture semiconductor devices, to deposit crystal films with the designed electrical properties or to modify the mechanical properties of the substrate to enhance its electrical conductivity.
Epitaxial reactor is a specialized device used in semiconductor manufacturing to deposit thin layers of crystalline material onto a semiconductor substrate. The process is known as epitaxy, which involves growing a crystal layer with a specific crystal orientation and structure that matches the underlying substrate. The epitaxial reactor provides controlled conditions for the deposition process, such as temperature, gas composition, and pressure, to achieve precise layer thickness and crystal quality.
The semiconductor industry is experiencing remarkable growth on a global scale. The escalating demand for electronic devices, such as smartphones, laptops, and tablets, is a key driver behind this growth. As a result, the epitaxial reactor market is poised to benefit significantly from the expansion of the semiconductor industry.
In addition, the LED industry is undergoing rapid growth due to the rising need for energy-efficient and durable lighting solutions. This surge in demand within the LED industry is expected to have a positive impact on the epitaxial reactor market.
Likewise, the solar cell industry is also witnessing substantial growth, primarily fueled by the increasing demand for renewable energy sources. As the solar cell industry expands, the epitaxial reactor market is anticipated to reap the benefits of this growth.
The epitaxially grown new single crystal layer can be different from the substrate in terms of conductivity type, resistivity, etc., and can also grow multi-layer single crystals with different thicknesses and different requirements, thereby greatly improving the flexibility of device design and device performance. The epitaxial process is also widely used in PN junction isolation technology in integrated circuits and in improving material quality in large-scale integrated circuits.
The core of an epitaxial (epi) reactor is the reaction chamber, typically made of quartz. Inside the chamber a holder for the silicon substrates, typically made of graphite coated with silicon carbide, is heated up to 900-1250°C while gases flow inside. These gases contain a volatile silicon compound and some dopant compounds carried by a chemical reducing or inert main gas flow.
Total Market by Segment: Global Epitaxial Reactor Market, by Type, 2018-2023, 2024-2029 ($ Millions) & (Units) Global Epitaxial Reactor Market Segment Percentages,
by Type, 2022 (%)
MOCVD
MBE
HVPE
CVD
Others(VPE, LPE, SPE)
Global Epitaxial Reactor Market, by Application, 2018-2023, 2024-2029 ($ Millions) & (Units) Global Epitaxial Reactor Market Segment Percentages,
by Application, 2022 (%)
Semiconductor
LED
Semiconductors
Light-Emitting Diodes (LEDs)
Solar Cells
Optoelectronic Devices
Power Electronics
Others
Global Epitaxial Reactor Market, by Substrate Material, 2018-2023, 2024-2029 ($ Millions) & (Units) Global Epitaxial Reactor Market Segment Percentages,
By Substrate Material:
Silicon
Gallium Arsenide (GaAs)
Gallium Nitride (GaN)
Indium Phosphide (InP)
Silicon Carbide (SiC)
key players include:
AIXTRON
Veeco
ASM International
Advanced Micro
Tokyo Electron Limited
Applied Materials
NuFlare Technology Inc
RIBER
TAIYO NIPPON SANSO
NAURA
LPE S.p.A
CETC
DCA Instruments
Scienta Omicron
Pascal
Dr. Eberl MBE-Komponenten GmbH
Zhejiang JSG
Epiluvac
Get Full Report @ https://semiconductorinsight.com/report/epitaxial-reactor-market/
0 notes
anyawinget · 1 year
Text
Europe VCSEL for Data Communication Market Business Status and Industrial Outlook 2020 to 2027
“The VCSEL for data communication market in Europe is expected to grow from US$ 84.34 million in 2019 to US$ 331.62 million by 2027; it is estimated to grow at a CAGR of 19.5% from 2020 to 2027.”
The report discusses many vital industry facets that influence the “Europe VCSEL for Data Communication Market” industry acutely which includes an extensive study of competitive edge, latest advancements, region-wise industry environment, contemporary market, and emerging trends, leading market contenders, and the current tendency of the end-user. The report also oversees market size, market share, growth rate, revenue, and CAGR reported previously along with its forecast estimation.
To Get a Sample PDF Copy:
https://www.businessmarketinsights.com/sample/TIPRE00014328
Europe VCSEL for Data Communication includes Market Analysis Report Top Companies:
·        Bandwidth10
·        Broadcom, Inc.
·        Hamamatsu Photonics K.K.
·        II-VI Incorporated
·        Lumentum Holdings Inc.
·        TRUMPF
·        VERTILAS GmbH
·        VI Systems GmbH
Europe VCSEL for Data Communication Market Split by Product Type and Applications:
This report segments the Europe VCSEL for Data Communication Market on the basis of Types are:
·        Single Mode
·        Multi-Mode
On the basis of Application, the Europe VCSEL for Data Communication Market is segmented into:
·        Gallium Nitride
·        Gallium Arsenide
·        Indium Phosphide
·        Other
Market Analysis and Status: Europe VCSEL for Data Communication Market:
-Since the COVID-19 virus outbreak in December 2019, the ailment has spread to just about 100 nations around the world with the World Health Organization pronouncing it a general health crisis. The worldwide effects of the coronavirus infection 2019 (COVID-19) are as of now beginning to be felt, and will significantly influence the Europe VCSEL for Data Communication Market.
-COVID-19 can influence the worldwide economy in three fundamental manners: by straightforwardly influencing creation and request, by supply chain and market interruption, and by its financial effect on firms and financial markets.
Scope of the Report:
The research report on the Europe VCSEL for Data Communication Market is a comprehensive publication that aims to identify the financial outlook of the market. For the same reason, it offers a detailed understanding of the competitive landscape. It studies some of the leading players, their management styles, their research and development statuses, and their expansion strategies. The report also includes product portfolios and the list of products in the pipeline. It includes a thorough explanation of the cutting-edging technologies and investments being made to upgrade the existing ones.
Click here to buy this report:
https://www.businessmarketinsights.com/buy/single/TIPRE00014328
Influence of the Europe VCSEL for Data Communication Market Report:
-Comprehensive assessment of all opportunities and risks in the Europe VCSEL for Data Communication market.
-Europe VCSEL for Data Communication market recent innovations and major events.
-Detailed study of business strategies for the growth of the Europe VCSEL for Data Communication market-leading players.
-Conclusive study about the growth plot of the Europe VCSEL for Data Communication market for forthcoming years.
-In-depth understanding of Europe VCSEL for Data Communication market-particular drivers, constraints, and major micro markets.
-Favourable impression of vital technological and market latest trends striking the Europe VCSEL for Data Communication market.
Finally, the Europe VCSEL for Data Communication Market Report is the authoritative source for market research that can dramatically accelerate your business. The report shows economic conditions such as major locales, item values, profits, limits, generation, supply, requirements, market development rates, and numbers.
Customization of the Report: This report can be customized as per your needs for additional data for up to 3 companies or countries or 40 analyst hours.
About Us:
Business Market Insights is a market research platform that provides subscription services for industry and company reports. Our research team has extensive professional expertise in domains such as Electronics & Semiconductors; Aerospace & Defense; Automotive & Transportation; Energy & Power; Healthcare; Manufacturing & Construction; Food & Beverages; Chemicals & Materials; and Technology, Media, & Telecommunications.
Contact us:
If you have any questions about this report or would like further information, please contact us:
Contact person: Sameer Joshi
Phone: +16467917070
0 notes
Tumblr media
Absolute vs. relative efficiency: How efficient are blue LEDs, actually?
The absolute internal quantum efficiency (IQE) of indium gallium nitride (InGaN) based blue light-emitting diodes (LEDs) at low temperatures is often assumed to be 100%. However, a new study from University of Illinois Urbana-Champaign Electrical and Computer Engineering researchers has found that the assumption of always perfect IQE is wrong: the IQE of an LED can be as low as 27.5%.
This new research was recently published in Applied Physics Letters.
As ECE associate professor Can Bayram puts it, LEDs are the ultimate lighting source. Since their invention, they have become increasingly popular due to their energy efficiency and cost-effectiveness.
An LED is a semiconductor that emits light when current flows through the device. It generates photons through the recombination of electrons and holes (carriers), releasing energy in the form of photons. The color of the light emitted corresponds to the energy of the photon.
Read more.
6 notes · View notes
itsgerges · 2 months
Text
Tumblr media
Kind Regards
Can A Light Beam Its Speed 1.16 million km per second Be Found? (Revised)
or
or
or
Abstract
The paper provides 4 hypotheses with their explanations and proves – let's provide them in following
Paper hypotheses
Hypothesis No. (1)
The space is created from one energy and this energy is provided by a light beam moves by a speed 1.16 million km per second – the speed is registered in the created space proves the speed is a fact.
Hypothesis No. (2)
The Gravitational Waves Are Produced By The Planets Motions Energies And Not By The Sun Gravitational Field– Moreover- The Sun Does NOT Produce A Gravitational Field And It Has No Massive Gravity- 
Hypothesis No. (3)
Mars original orbit was between Mercury and Venus and Pluto was The Mercury Moon (Pluto size was equal Mercury size) But these two planets had migrated from their original orbits as a result for a collision- the planets migration caused a risk for the solar system geometrical design- Uranus and Jupiter the Two planets worked to repair the solar system design– that caused Jupiter orbit to be the main orbit in the solar system design- Jupiter orbit proves the speed 1.16 million km per second is a fact.   
Hypothesis No. (4)
The Sun Is a phenomenon created by the planets motions
The sun rays is created from the gravitational waves motions energies and the gravitational waves are produced by the planets motions energies-
Based on that 
The Sun Is A Phenomenon Created By The Planets Motions
And
The Sun Is NOT Doing Nuclear Fusion To Produce Its Rays- instead- The Planets Motions Energies Total Is Used To Produce The Sun Rays
The Sun Is Created After All Planets Creation And Motion – means
The Planets Are Created And Moving In Their Orbits Around A Point Of Space Before The Sun Creation- And The Sun Is Created On This Point Of Space around which the planets revolve - And
No Planet moves by The Sun Gravity (Newton is Wrong) - And
The Sun Doesn't Produce A Gravitational Field (Einstein Is Wrong)
And
The Sun Is A Phenomenon Created By The Planets Motions– means-The Sun creation and death depends on a cycle – means – after this current sun death another sun will be created for the solar system.
The Hypotheses Explanation
The abstract provides the hypotheses explanation and the paper provides their proves and discussions- In following the hypotheses will be explained in details 
NOTICE - The creatures and all matters on the Earth are created from the sun light energy and the sun light speed is 300000 km/s, because of that, the creature realization is limited to the speed 300000 km/s and can't realize the original speed (1.16 million km per second) that means the speed 300000 km/s is a limit for the creatures realization and not for the universe design.   
Notice- this revised version adds only more proves for the paper first hypothesis-
Hypothesis No. (1)
The space is created from an energy and this energy is provided by a light beam moves by a speed 1.16 million km per second – the speed is registered in the created space which proves the speed is a fact
The Hypothesis Explanation
I- The Space Is Created By One Light Beam Energy- And This Light Beam Speed Is 1.16 million km per second
I-1 Preface (the main idea)
I-2 The Space Creation Method (the distances are one network)
I-3 Light Coherence between light (1.16 million km /s) and light (300000 km/s)
I-4 The Matter definition (based on my planet diameter equation)
I-5 The Planets Creation
I-6 Can The Time Machine Be A Fact?
The Hypothesis Proves
I-7 The Proves Logic Analysis
I-8 Planet Velocity Is A Function In A Speed = (1.16 million km /s)
I-9 Planets Orbits Are Defined By A Motion Its Speed = (1.16 million km /s)
I-10 Jupiter distances are defined by a motion by a speed = (1.16 million km /s)
I-11 The Solar System Geometrical Design Proves The Hypothesis
I-12 The Solar System Distances Analysis Prove The Hypothesis
I-13 Deep Analysis For The Planets Orbits
1-14 Light defines each planet orbital period
I-15 Can Planet Diameter Be Used As A Period Of Time
I-16 Mercury Orbit Analysis
I-1 Preface (The Main Idea)
The solar system (planets and distances) is created from one energy and this energy is provided by one light beam and this light beam moves by speed (1.16 million km/s)
The space is created before the planets creation-
Let's write the whole story in following
The light beam (1.16 million km per second) started its motion from Mercury orbit moves toward Pluto orbit– by that– we consider Mercury orbit is the origin point-
Now- we should notice- No planet is created yet- the motion from Mercury orbit to Pluto orbit defines the motion direction- and No planet is created before this motion end nor during this motion- the planets will be created after this motion is finished means when the light 1.16 million km per second reaches to Pluto (orbit)- after this event – the planets will be created –as I will explain later  
Notice
The light (1.16 million km per second) creates the distances by its motion- means- the light moves from Mercury point to Venus point– the distance from Mercury to Venus was not found and is created only by the light motion through it for first time- means – before the light motion this distance was NOT found- It's found after the light moves through this distance for first time-    
This is similar to the blood motion through the arteries, the blood creates these arteries and the blood moves through these arteries, but the blood created these arteries with its first motion and that needed energy- but – after the arteries creation the blood move through them without any energy is required- means- the first motion is the most important one because by it the arteries are created
Shortly- The space is created from the energy of this light beam its speed 1.16 million km per second – NOW- after the Space creation- the light beam energy is decreased because of the energy consumption in the space creation process- and the rest energy is one light beam its speed is (C=300000 km/s =the light known speed) – But - We understand that- it's the same one light beam- its speed was 1.16 million km /s before the space creation- and the light created the space and that caused to consume the light energy and that caused to decrease the light speed to be 300000 km/s
Shortly- the light beam started its motion from Mercury (orbit) with speed 1.16 million km /s and reaches to Pluto (orbit) with a speed 300000 km/s because of the energy consumption in the space creation process  
Let's give example to explain this idea
Imagine we create A Sea Of Water- we use energy to create this sea of water- now we have some energy and we use this energy to create this sea of water- BUT- our energy is NOT spent completely But there's a small part still rest with us – this small part of energy is used to create one wave moves through this sea and this wave speed is 300000 km/s (I suppose the space is similar to the sea of water)
Now – the rest energy is found in one light beam its speed 300000 km/s and this light beam is found NOW in Pluto Orbit – and this light beam will be reflected from Pluto orbit toward the inner planets– means- the rest energy will move in the reflected direction to the original light motion direction.
This idea will be explained in details in the next point- shortly
The light beam (300000 km/s) will be reflected from Pluto toward the inner planets
AND  the light 300000 km/s will meet the original light beam (1.16 million km per second) in the origin point (in fact – beside the origin point) and there's a coherence of light is done between the light beam (300000 km/s) and the light beam (1.16 million km per second) – this coherence of light is proved strongly- we have to ask (how can that be possible while the light beam 1.16 million km /s is consumed and the new light beam 300000 km/s is the rest energy? how this light beam (300000 km/s) can meet the original one (1.16 million km per second)? in points no. (I-3) and no.(I-6) I answer this question.
Notice (1) I suppose the rest energy is a light beam its speed is (C=300000 km/s) but this idea is for simplicity- the rest energy can be in any wave form its speed (C=300000 km/s) – no necessity to be in visible light beam form
It's simply energy moves by the known speed of light (C=300000 km/s)
Notice (2)
All Planets Orbits Are Defined Before Any Planet Creation-
The light used the distance from the sun to Pluto as one area and create one geometrical design for this area before any planet creation 
Notice (3)
The planets are created from the rest energy its speed (300000 km/s) – means- the space is created by the light 1.16 million km per second and the energy is consumed in the space creation and the rest energy is one light beam its speed 300000 km/s (or one wave moves by the known speed of light C=300000 km/s) – the solar planets are created from this one wave its speed 300000 km/s and that means all planets orbit are created and defined before any planet creation
Notice (4)
The Sun Is Created After All Planets Creations And Motions
The sun is a phenomenon created by the planets motions energies total
The sun doesn't produce a gravitational field and doesn't have massive gravity
Logically – No planet moves by the sun gravity
(The Planet Moves With The Energy From Which The Planet Is Created – Newton is wrong- later we discuss the proves)
Notice (5)
The child (fetus) inside his mother is created by the blood motion- the blood motion creates arteries for this child and through these arteries the blood moves also but the arteries themselves are created by this same blood motion- Similar to that- the distances are created by the light motion energy and the light moves through these distances also but originally these distances themselves are created by the light motion energy-  means the distances creation is done with the first time of the light motion through them - that required energy- but after the distances are created no more energy is required- the light (or planet) can pass simply through these distances
I-2 The Space Creation Method (the distances are one network)
Data
778.6 = 1.16 x 671
721    = 1.16 x 621
629    = 1.16 x 543
543    = 1.16 x 468
5906  = 1.16 x 5127
These numbers are distances in (million km)
778.6, 721, 671, 629, 551 are Jupiter distances to the sun, Mercury, Venus, Earth and Mars respectively- 5906 and 5127 Pluto distances to the sun and Jupiter respectively     
468 = 936 /2 where (940 million km = the Earth orbital circumference)
Discussion
(1)
The previous data tells us how the light beam motion creates the distances-
Simply the light uses a distance as (a period of time) and travels through this period another distance- that can be understood clearly from Jupiter distances- let's look deeply as possible
The light beam (1.16 million km per second) uses the period 629 seconds to pass a new distance = 729 million km (Mercury Jupiter distance is 721 million km error 1%) – where 629 million km = Jupiter Earth distance
Also  
The light beam (1.16 million km per second) uses the period 671 seconds to pas a new distance =778.6 million km (Jupiter orbital distance) 
where 671 million km = Jupiter Venus distance
by this method the light creates the distances based on each other- and that makes all distances to be created depends on one another and that makes all distances in the solar system to be One Network where all distances are created based on the same One Geometrical Design
(2)
The data shows the creation method- and we understand that- the distance 551 million km (Jupiter Mars Distance) is created firstly and the light (1.16 mkm/s) used this distance as a period of time (551 sec) and the light travels during this period a distance =(639 million km where 629 million km is Jupiter Earth distance error 1.5%) and then the light uses the new distance (629 mkm) as a period of time (629 sec) and the light travels during this period a distance = (729 million km – where 721 million km = Mercury Jupiter distance – error 1%)
The data shows the method clearly and we understand the light original motion started from Mercury orbit to Pluto orbit because the distances are created based on one another in that direction of motion as explained clearly
(3)
New data NO. (1)
2723 sec x 2 x 300000 km/s = 1622 million km – where
2723 million km = Uranus Earth Distance
1622 million km = Uranus Neptune Distance
The data shows- the light beam its speed (C=300000 km/s) is in proportionality also with the created distances but this proportionally is found in Reflected Direction
Logically, The light can NOT move from Uranus to Neptune and after that the light returns to move from Uranus to the Earth- it's simply reflected direction  
The distances are NOT created by the motion of this light beam (300000 km/s) – but the distances are created by the motion of the original light beam (1.16 million km per second) but the proportionality between the distances with the light (300000 km/s) is found because there's a proportionality between the original one (1.16 million km per second) and this light beam (300000 km/s) – AND 
Because the light (300000 km/s) moves in the reflected direction of the original light beam (1.16 million km per second) that causes the proportionality between the distances and the light (300000 km/s) be in a reflected form
New data NO. (2)
2094 sec x 300000 km/s = 629 million km
2094 million km = Uranus Jupiter distance
629 million km   = Earth Jupiter distance
The light (300000 km/s) moves in reflected direction- for that- the distance 2094 million km is used as a period of time to pass a new distance (629 mkm)
The data proves the idea clearly
Notice (1)
The proportionality between the light (1.16 million km/s) and the light (300000km/s) will be discussed in point no. (I-3)
Notice (2)
In Point (**) I prove the gravitational waves are produced by the planets motions energies- and I prove that – the planets motions energies move toward Pluto and this energy is reflected from Pluto toward Venus- this fact is proved by powerful data and proves- for that – I don't explain in details the light motion trajectory from Pluto toward the inner planets because this motion trajectory is studied in details in the hypothesis No. (2) of this discussion- understandable that- the planets motions energy trajectory is the same trajectory the light moves through it – means this trajectory is studied in details and powerful proves in point no. (**)
Notice (3)
Jupiter Distances Analysis shows that Jupiter orbit is the central orbit for the light (1.16 million km per second) based on which all planets orbits are defined.
But – this is not the first creation case –
The light (1.16 million km per second) created the planets orbits based on each other starting from Mercury orbit moves toward Pluto orbit – this is the fist creation case – and this fact is proved strongly in point no. (I-9*)
BUT
Mars had migrated from its original orbit (Mars original orbit was between Mercury and Venus) and Pluto had migrated also (Pluto Was The Mercury Moon revolves around Mercury and Pluto size was equal Mercury size)
The planets migration caused a serious risk for the solar system geometrical design- Uranus was the first planet tried to repair the solar system geometrical design and to save it- by that
Uranus created a vertical effect on Jupiter orbit to fix Jupiter in its orbit and prevent it to migrate with the migrant planets- and based on Jupiter orbit the other planets orbits are modified – that supported the solar system original design and saved it which causes to protect the geometrical design from the destruction.  
As a result
That causes Jupiter orbit to be the most important orbit in the solar system- the paper third hypothesis explains the planets migration and Jupiter orbit analysis is done with the solar system design analysis (I-11*)
I-3 Light Coherence between light (1.16 million km /s) and light (300000 km/s)
(1)
The Coherence Of Light
The previous explanation told us that we have 2 light beams-
The original light beam its speed (1.16 million km per second) and it started its motion from Mercury orbit to Pluto orbit (where Mercury orbit is the light motion origin point) – and this light beam created all distances in the solar system and lost its energy in the space creation process and the rest energy is one light beam its speed is (C=300000 km/s)
The other light beam is the rest energy- its speed is (C=300000 km/s) and it moves in a reflected direction from Pluto toward Venus and Mercury-
Now – we have a coherence of light between these two light beams- the coherence is proved by powerful proves BUT firstly we have to ask (how can this coherence be occurred)? Because the original light (1.16 million km/s) is consumed and its energy is used already and the rest energy is this light its speed is (300000 km/s) - HOW can the light (1.16 million km/s) meet the light (300000 km/s)??
Imagine we have (116 dollars) and we spent all money except (30 dollars)- how can this (30 dollars) meet the original money (116 dollars)??
Let's write the answer
Suppose the light beam (300000 km/s) moves in the reflected direction (in the space) and also (in the time) – that can enable the light (300000 km/s) to meet the original one (1.16 million km/s) in the past and the coherence will be done there in the past- and we see the coherence results and effects on the solar system -
Means – the light (300000 km/s) moves into the past and found the original light (1.16 million km/s) in the past
Notice No. (1)
The original light beam (1.16 million km/s) can NOT move toward the future to meet the light (300000 km/s) because in the future the original light beam (1.16 million km/s) is NOT found –by that – the coherence can't be occurred in the future - But – the light (300000 km/s) can move into the past because this light beam (300000 km/s) was found in the past because it's a part of the original light beam (1.16 million km/s)
Notice no. (2)
I prove the coherence is done by powerful proves- that tells- this idea is a fact–means- there's a strong proof tells (in fact the light beam 300000 km/s moved into the past) and if we can use this feature practically we can get photos from the past events and by that we can have photos from the catastrophe which killed the dinosaurs and know much better about what had happened really in that time - This can be a real machine of time – the light motion into the past is a strong method to perform this invention. 
Notice no. (3)
Why Can NOT We Move Into The Past As We Move Into The Future?
This question is answered in point no. (**)
(2)
The Light Coherence Proves
First Proof
The planets order is typical to the interference of Young –
In the double slits experiment, Young Interference is consisted of bright fringes and dark fringes - If we consider planet diameter is equivalent to bright fringe – we will see that- the planets order is typically to Young interference because
Jupiter (the greatest fringe) is in the middle and the fringes width is decreased gradually on both sides – typically to the planets order
Notice / I have proved that (Mars original orbit was between Mercury and Venus) if we restore Mars to its original orbit the order will be typical to the Young Interference
(I prove this fact in point no. **)
Second Proof
The planets velocities are defined based on the speed (1.16 million km per second) and the planets velocities analysis shows the speed (300000 km/s) is the planets motions limit- means- the planets velocities are defined based on both velocities (1.16 million km per second) and (300000 km/s) I prove this fact in point No. (**)  
Third Proof
The light coherence defines the solar day period (24 hours) which is the solar system design cornerstone 
(1.16 /0.3) x 2π = 24.3
By this equation the space and time are created- the equation tells–the space is created in curves (2π) and the time is created in units each unit is (24 hours) 
Please note – the solar system geometrical design depends on the light motion in a solar day (24 hours = 86400 seconds) 
The light (1.16 million km per second) moves in a solar day (86400 seconds) a distance  = 100733 million km (= the planets orbital circumferences total)
Fourth Proof
The planets data prove there's a speed (1.16 million km per second) found in the solar system but the sun light beam moves by speed (300000 km/s) that tells the two speeds are facts and found in the solar system and the coherence between them is a logical result
The hypothesis proves discuss many powerful proves for this fact-
Notice- the coherence of light is a very important fact because it tells the light (300000 km/s) moved into the past and by that gives us a proof for the motion on the time axis- for that – many powerful proves support this fact.
I-4 The Matter definition (Based On My Planet Diameter Equation)
(1)
Let's remember my planet diameter equation
Planet Diameter Equation (v1/v2)= (s/r)= I
v = Planet Velocity                                                          
r = Planet Diameter
s= Planet Rotation Periods Number In Its Orbital Period
I= Planet Orbital Inclination        (example, 1.8 degrees be produced as a rate 1.8)
v2, s, r and I are belonged to one planet and v1 is belonged to another planet
The planet (v1) is defined by test the minimum error 
Earth Equation uses Neptune velocity
Mars Equation uses Pluto velocity
Jupiter Equation uses the Earth moon velocity
Saturn Equation uses Mars velocity
Uranus Equation uses Neptune velocity (As Earth)
Neptune Equation uses Saturn velocity
Pluto Equation uses the Earth moon velocity (As Jupiter)
(The Equation works from The Earth To Pluto) (the discussion explains the reason)
Example
Neptune Equation (89143 /49528) = 9.7/ 5.4 =1.8         
89143          = Neptune rotation periods number in Neptune orbital period
49528 km    = Neptune diameter
9.7 km/s      = Saturn velocity
5.4 km/s      = Neptune velocity
59800 days = Neptune orbital period (and Neptune rotation period =16.1 hours)
1.8 degrees = Neptune Orbital Inclination
(the equation is proved and discussed in details in point no. **)
(2)
Can We Define The Matter Nature Based On My Planet Diameter Equation?
The equation tells, the matter is created based on its motion! means Neptune diameter is 49528 km because Neptune velocity is 5.4 km/s!!
That tells the motion with velocity 5.4 km/s is defined before Neptune diameter is created! Can we understand such definition for the matter nature? let's try
(A)
The Matter Nature
The space and matter are created from the same original energy and they move with this original energy motion- BUT the matter has a distinguish picture and different velocity from the space picture and velocity (notice- The Gravitational Waves Prove That The Space Has A Motion)  
If we suppose the space is similar to the sea of water, the matter be similar to a whirlpool or a vortex found on the sea page- means- the matter is a geometrical design has a distinguish picture from the space- as the whirlpool, it's created from the sea water but it has a distinguish picture from the sea waves picture
Means
The whirlpool is carried by the waves motion- and- the matter is carried by its original energy and moves with it- No Mass gravity is required for the matter motion- means- the matter is MOVABLE by nature.
Also
The whirlpool dimensions are defined by the water motion - for example- we have a whirlpool its diameter is (2 meters)- this diameter is defined by the sea water motion features (velocity, pressure and other motion features) by that- the water motion analysis explains how the whirlpool dimensions are created
Also- the whirlpool is created but the creation requirements are needed every day- means- even if this whirlpool is found since years it can be changed immediately if the water motion features are changed- means- the whirlpool creation process is NOT a historical one.
Also- the matter is similar to a creature muscle, the muscle is found based on the blood motion and without this motion the muscle can be changed or removed.
Shortly
The Original Energy Was Found In Motion By Itself (As Moving Light Beam)
From This Moving Energy The Planet Matter Is Created
The Created matter dimensions are defined by the features of this original energy motion (means the planet creation data is defined by the energy motion features)
After the planet creation- The Planet Moves With This Original Energy – means- the created planet moves a motion depending on the motion of this original energy because the planet moves with this original energy motion- and – the planet moves by this original energy motion (No mass gravity is required to cause the matter motion)
The planet creation data is in full harmony with its motion features- this fact is produced logically because the planet data is defined by the original energy motion features.
This explanation tells (Neptune diameter is 49528 km because Neptune velocity is 5.4 km/s)
Example For Explanation
We agreed that the space is similar to the sea of water and the planet (matter) is similar to a whirlpool found on the sea page-  this picture explains the idea clearly- because
We see the whirlpool doesn't move by the sea water waves velocity but by another velocity and that shows a distinguish in form and motion between the whirlpool (the planet) and the sea waves (the space)- BUT- the whirlpool dimensions are defined based on the sea water motion features- and if the motion features are changed the whirlpool dimensions will be changed also- also the whirlpool moves by the sea water motion even with a different velocity relative to the sea waves velocity but the whirlpool motion still is  caused by the sea water motion- based on this picture we can say (because the water motion velocity is 80 km/h that causes this whirlpool diameter to be 2 meters "for example') – this is perfectly our sentence – let's remember it     
(because Neptune velocity is 5.4 km/s that causes Neptune diameter to be 49528 km)
This idea is proved by my planet diameter equation (my fourth equation) (point No.**)  
(B)
Now The velocity is a motion in (A Defined Direction)
Means– the matter is created because it depends on a motion in a defined direction- as we have seen- Neptune diameter is 49528 km because Neptune velocity is 5.4 km/s but this velocity is a motion in defined direction- and that tells Neptune creation depends on a motion in the direction of the (x axis positive "+x ") (for example)
That tells, if this motion moves in (x axis negative "-x ") that will cause Neptune diameter to be changed or perished
Means- the matter creation needs a motion in A Defined Direction
Now let's ask our question
Why Can't The matter (creature) Moves Toward Its Past?
Because the matter depends on a motion in one defined direction- that causes the matter moves into (the future) always and can't move into (the past) let's discuss this question more deeply in point no (I-6)
Notice
No Planet Moves By The Sun Gravity (Newton is wrong) – logically because- the planet moves by its creation force- means- the planet creation and motion should be done by one force only (one energy only) because if two forces have effects on the same one planet- this planet will be broken- this fact is proved strongly with the gravitational waves source discussion (Point no.**)  
I-5 The Planets Creation
I summarize the main idea in following and the idea proves and discussions are found in point no. (**)
(i)
We know, the solar system is created from energy of one light beam its speed is 1.16 million km per second- and – the light created the space (the planets orbits) firstly and the energy is consumed in the space creation- and for that- the rest energy is found in one light beam its speed is 300000 km/s - And
From this light beam 300000 km/s the solar planets are created
Shortly
before the solar planets creation
The solar system was one light beam (or one wave moves by speed of light (300000 km/s)- by that – the solar system is One Wave moves by speed of light (300000 km/s)
Now
The Solar System needs To Create A Stationary Point Its velocity Zero relative to the moving one wave (300000 km/s)
This is the basic information in the solar system design-
The solar system needs to create a stationary point relative to the wave motion- by that – two velocities will be found which are (v1= the wave its speed 300000 km/s) and (v2= Zero= the stationary point velocity relative to the wave motion)–these two velocities produce a relative motion with different velocity 300000 km/s– this relative motion is the solar system design cornerstone.
Shortly – the solar system needs to create A Stationary Point 
Notice– The solar system is carried by the light beam motion, NO stationary point can be found here – it's similar to a ship on the sea water- Nothing can stop- because the motion is done forcedly by the sea water –
The stationary point will be similar to the whirlpool (vortex) on the sea page-  BUT
The solar system needs to create this stationary point - Now – let's try to create this stationary point in following - The solar system uses two procedures to do that,  
(ii)
The first procedure
The wave its velocity 300000 km/s revolves around a point in space (any point in space), the revolution motion creates 2 equal velocities on both sides of the revolution- the two velocities are equal in value and opposite in direction- their total be equal Zero-means- the revolution motion creates A Stationary Point in the center of the revolution. 
The second procedure
The previous idea is correct- but –the velocity 300000 km/s is a huge one and to decrease it to Zero velocity this is a complex process– for that- the wave (300000 km/s) created small waves with low velocities to use them as steps to decrease the velocity to Zero- the small waves are The Planets- (The planet is a small wave moves by low velocity relative to the original wave its velocity 300000 km/s) 
Why Are These Small Waves Required?
Because the velocity 300000 km/s is decreased to Zero by using these small waves and their low velocities- the low velocities are used as steps to decrease the unified wave velocity (300000 km/s) to be (Zero)- this process decreases the velocity gradually from 300000 km/s to Zero depending on these small waves velocities (the planets velocities)  
Means- the planets are created for this process to decrease the wave velocity from 300000 km/s to Zero- and The Planet Is A Small Wave Moves By Low Velocity 
Shortly – the solar system has one complete system of velocities, Starting from Zero to 300000 km/s where the planets velocities are the steps between the two velocities – let's prove that here
(iii)
300000 km = 7.1 x (205.8)^2 where
7.1 is Lorentz length contraction effect for speed 297000 km/s (99% of speed of light)
205.8 km/s = the 9 planets velocities total (176 km/s) + the Earth moon velocity
(The moon velocity =29.8 km/s = the Earth velocity because they revolve together)
Why does the data use the squared value (205.8)^2?
We know the answer- but - Let's remember it
The planets are geometrical points on the same light beam and move with its motion- for that- the planets velocities rates creates rates of time– for example-  Mercury velocity = 1.6 the Earth velocity- that means – one hour of Mercury clock = 1.6 hours of the Earth clock- Why??
Because Mercury and the Earth are carried by the same one light beam- the light moves one motion and passes one distance in one period of time- by that Mercury and the Earth have to move this same motion and to pass this same distance in this same period of time- but the two planets velocities are different- for that- the planets use different rates of time based on their velocities rates and by that the planets move equal distances in the same period of time –
Now- the velocity (205.8 km/s) moves relative to the stationary point (Zero) and creates a rate of time (1 second = 205.8 seconds) –
(one second of the unified wave clock = 205.8 seconds of the stationary point clock)
But – the energy is reflected in the solar system (I prove that in point no.**),
The energy reflection reflects the players – means
(one second of the stationary point clock = 205.8 seconds of the unified wave clock)
The stationary point will be THE SUN – by that
(one second of the sun clock = 205.8 seconds of the unified wave clock) – means
(one second of the sun clock = 205.8 seconds of any planet clock) –
Now during one second of the sun clock, the wave clock needs 205.8 seconds while the wave moves by a velocity 205.8 km/s- means –
During one second of the sun clock, the wave moves 42253 km = 300000 km /7.1
That creates the different velocity 300000 km/s between the sun motion and the wave motion-
Notice 1
The wave (205.8 km/s) moves during 1461 seconds a distance = 300000 km, and we know the Earth cycle (1461 days = 365 +365 +365 +366)
That tells, the speed of light (300000 km/s) is performed by the rate of time and that causes to create the Earth cycle-   
Notice 2
Planet velocity is created by the rate of time- means- if no rate of time can be used – No planet velocity can be created – instead- all motions will be only by speed of light (300000 km/s)- the planet can create a small velocity because it can use rate of time
We realize that clearly because
The planets motions depend on the light motion- by that – the motion is done by One Motor only which moves by speed of light (300000 km/s), the planets can only move by speed of light or create a rate of time for their smaller velocities - No more options are provided.  
Notice 3
We understand that, the planets are geometrical points on the same light beam, means
The planets are similar to carriages in one train and the light motion is the train engine  means the planets are carried on the light beam and move with this light motion
I-6 Can The Time Machine Be A Fact?
To answer this question we need to review basics facts we have studied – let's do that in following
(1)
The solar system is created from one energy and this energy is provided by one light beam
(2)
The light moves simply and freely in any direction (for space) and (for time)- means- the light can move into the future (as matter does) or into the past (which the matter can Not do)
(3)
We know, the solar system is created from one light beam, and this light moves by a speed (1.16 million km per second) - And
We know, the light (1.16 million km per second) created the planets orbits firstly before any planet creation and the energy is consumed in the space creation and because of the energy consumption the light speed is decreased from  (1.16 million km per second) to the known speed of light 300000 km/s – also
We know, the light (1.16 million km per second) started its motion from Mercury orbit moves toward Pluto- that means- the light (1.16 million km per second) started from Mercury orbit with speed (1.16 million km per second) and the light created all planets orbits till Pluto orbit- before any planet creation- and by that- the light lost its energy and the light beam in Pluto orbit reduced its speed to be 300000 km/s as a result for the energy consumption in the space creation process
(4)
Also we know the energy is reflected from Pluto toward Venus (the inner planets)
By that the light beam (300000 km/s) moves in the reflected direction to the original light beam (its speed 1.16 million km per second) 
And – we know-
The light beam (300000 km/s) reaches to the original point (Mercury Orbit) from which the light (1.16 million km per second)  started its motion 
And we know that
A coherence of light is done between the original light beam (1.16 million km per second) and the light beam (300000 km/s)
BUT  we don't know how such coherence can be occurred? Let's analyze that deeply in following
(5)
The produced light beam (300000 km/s) moves in (the reflected direction) to the direction of the original light beam (1.16 million km per second) (In Space)  and reaches to Mercury orbit (the origin point)
But– logically – the produced light beam (300000 km/s) can NOT find the original light beam (1.16 million km per second) there because the original light beam is consumed already in the space creation process and the rest energy is this produced light beam (300000 km/s) – based on that –
How Can This Coherence Be Occurred? Means-
How can the produced light beam (300000 km/s) meet the original light beam (1.16 million km per second)?  The answer is
The produced light beam (300000 km/s) moves (in the reflected direction) to the motion direction of the original light beam (1.16 million km per second) (In Space) and (In Time) Means- the produced light beam moves into (Its Own Past) and in the past this produced light beam (300000 km/s) was (A Part of the original light beam 1.16 million km per second) and because of that the produced light beam (300000 km/s) can meet the original light beam (1.16 million km per second),
And
The two light beams create a coherence (in the past) and we see the results of this coherence in our present time-
The idea is very important because – the coherence of the two light beams (1.16 mkm/s and 0.3 mkm/s) is proved strongly and with powerful proves and any explanation for this coherence will prove that the produced light beam (300000 km/s) must move Into The Past to enable this coherence occurrence- and that tells clearly- the travel through the time is possible and fact
BUT
Can the matter moves into its past as the light does? NO
Why?? Because
We know the light can move simply in any direction (+ x, + y, + z, + t) by that the light can move into the future and can move into the past BUT
The matter creation depends on A Motion In A Defined Direction-
let's remember this idea
Neptune diameter =49528 km because Neptune velocity is 5.4 km/s
(This Fact Is Proved By My Planet Diameter Equation)
Now, Neptune velocity is a motion in a defined direction
(for example a motion in +x direction)
The energy moves in this direction (+x direction) and because of this motion Neptune matter is created and Neptune diameter is defined- now if the energy moves in (opposite direction "–x direction") that will change Neptune diameter or cause to perish its matter at all
Means- as long as – Neptune is found- that means – the energy moves in one direction (and not two directions) – for that Neptune can move into the future but can NOT move into the past.    
Notice
The matter can not move into the past but the light can do that-
Means- we have the time machine already- we need to know how to send the light into the past and by that we can have photos from the past events- and this will be The Time Machine
The Hypothesis Proves
I-7 The Proves Logic Analysis
I-8 Planet Velocity Is A Function In A Speed = (1.16 million km /s)
I-9 Planets Orbits Are Defined By A Motion Its Speed = (1.16 million km /s)
I-10 Jupiter distances are defined by a motion by a speed = (1.16 million km /s)
I-11 The Solar System Geometrical Design Proves The Hypothesis
I-12 The Solar System Distances Analysis Prove The Hypothesis
I-13 Deep Analysis For The Planets Orbits
1-14 Light defines each planet orbital period
I-15 Can Planet Diameter Be Used As A Period Of Time?
I-16 Mercury Orbit Analysis
I-7 The Proves Logic Analysis
Why can we prove that, a light beam its speed 1.16 million km per second is found in the solar system? also, the theory tells this light beam energy is consumed and the rest energy is found in one light beam its speed 300000 km/s (the known speed of light), if this light energy is consumed, how can we prove its existence?
There are two major reasons, which are
The Planets Orbits Are Created Before Any Planet Creation- And These Orbits Are Created Based On One Motion- And This One Motion Is Done By A Speed 1.16 Million Km Per Second.
The Planets Matters Are Created Based On Their Orbits – means- the planet is similar to a tree and the orbit is similar to a ground and the tree is planted in the ground-
NOTICE
after the planet creation, the planet can migrate from its original orbit to any other orbit - as Mars and Pluto did and that will not cause to destroy the planet. 
Shortly-
the planet matter and data is created based on this planet orbit- the orbit is defined before any planet creation and based on the orbit the planet matter and data is created (we remember- the space is similar to the sea of water and the planet matter is similar to a whirlpool found on this sea page- that tells the whirlpool is created based on its place in the sea of water)
Shortly- The Planet Matter Is Created Depends On This Planet Orbit
The speed 1.16 million km per second is registered in the planets orbits because the orbits are created from the energy of the light beam (1.16 million km per second), and the planet matter is created from this planet orbit (energy)
Shortly
The light beam (1.16 million km per second) is the source of energy for (everything) in the solar system-
All orbits are defined by its energy, all matters are created by its energy, and all motions are done by its motion-
Can we prove this light beam is a fact? YES we can
The analysis for any data or any motion will discover this light beam because it's the source of energy for everything
Shortly
the light beam (1.16 million km per second) is The Source Energy of the solar system
The mother of all children can be discovered by analysis these children data 
A QUESTION
Can the solar system design uses a rate 1.16 and I can't understand that but wrongly consider this rate (1.16) as a speed of light 1.16 million km per second?
NO- this can't be possible – Because
The light beam (1.16 million km per second) behaves typically to the known light beam (300000 km/s) – as we will see in the data discussion
I-8 Planet Velocity Is A Function In A Speed = (1.16 million km /s)
DATA
My 5th equation (v1v2=322)- the planets velocities prove it–let's see that in following  
322 = 47.4 km/s (Mercury velocities)  x 6.8 km/s  (Uranus velocities)                    
322 = 35 km/s  (Venus velocity) x 4.7 km/s (Pluto velocity) x 2             
322 = 29.8 km/s (the Earth velocity) x 5.4 km/s (Neptune velocities) x 2      
322 = 24.1 km/s (Mars velocity) x 13.1 km/s (Jupiter velocity)               
322 = (17.9 km/s)^2 (Ceres velocity) (Max error 2%)
DATA ANALYSIS
The previous data tells the planets velocities are defined by three features
(1st Feature)
The planets velocities are complementary one another –means - each planet velocity is complementary with another planet velocity– means– The planets velocities are defined in pairs and not in single planets. 
(Notice, the inner planets orbital inclinations are defined by the rule (v1/v2), for example, Mercury orbital inclination 7 deg = Mercury velocity 47.4/ Uranus velocity 6.8 that proves the effect of the rule (v1v2=322) on the planet motion)
Ceres velocity tells the idea - Ceres is used as the main point - as a result the outer planets be complementary with the inner planets – for that the rule (v1v2=322) controls the planets velocities- that means- The planets velocities are created based on One Design- Ceres velocity is used as the main point for this design
(2nd Feature)
Why the constant is 322? because 1160000 seconds = 322 hours – means- there's speed of light = 1.16 million km /s - Shortly
Mercury (47.4 km/s) moves during 6.8 hours a distance             = 1160000 km 
Uranus (6.8 km/s) moves during 47.4 hours a distance               = 1160000 km  And
Venus (35 km/s) moves during 2 x 4.7 hours a distance             = 1160000 km 
Pluto (4.7 km/s) moves during 2 x 35 hours a distance               = 1160000 km 
Earth (29.8 km/s) moves during 2 x 5.4 hours a distance             = 1160000 km 
Neptune (5.4 km/s) moves during 2 x 29.8 hours a distance        = 1160000 km  And
Mars (24.1 km/s) moves during 13.1 hours a distance                = 1160000 km 
Jupiter (13.1 km/s) moves during 24.1 hours a distance             = 1160000 km  And
(Notice - Saturn (9.7 km/s) moves during 33.2 hours a distance = 1160000 km  - (between 33.2 and Venus velocity 35 km/s the error 5%)) (Data Max error 2%)
The Data Proves, The Planets Velocities Are Functions In The Speed 1.16 Million Km Per Second. That proves the speed (1.16 million km per second) is A Fact
(notice the planets velocities are complementary one another also based on the known speed of light 300000 km/s, the paper provides this data) 
(3rd Feature)
The planets velocities limit depend on the known speed of light 300000 km/s
Let's explain that in following
The 9 planets velocities total is 176 km/s (I add the Earth moon velocity 29.8 km/s)
The 10 planets velocities total is 205.8 km/s
300000 km = 7.1 x (205.8)^2
The speed 297000 km/s (99% speed of light) causes Lorentz length contraction effect with the rate 7.1
The velocity (205.8 km/s) moves during 205.8 seconds a distance 42253 km
Where 300000 = 7.1 x 42253 km BUT 42253 = (205.8)^2
The squared value (205.8)^2 is found because of the used rate of time
We have studied this equation in point (I-5**) -the data shows, the planets velocities are defined as parts of a complete system of velocities starts from (Zero = stationary point) and reaches to the speed of light 300000 km/s and between these two values the planets velocities are defined to support this same system- that tells- the planets velocities are defined with limit to the speed of light (300000 km/s) - The data proves the speed (1.16 million km per second) is a fact -and also the data proves the coherence is done between the light (1.16 million km per second) and the light (300000 km/s)
I-9 Planets Orbits Are Defined By A Motion Its Speed = (1.16 million km /s)
(1) Mercury Motion
During 310s light its speed (1.16 million km per second) travels 360 million km
During 310 s light known speed (300000 km/s) travels 93.1 million km
BUT
93.1 million km x 2π = 586 million (this value will be used by Venus as a period) 
Where 360 million km         = Mercury Orbital Circumference
(2) Venus Motion
During 586s light its speed (1.16 million km per second) travels 680 million km
During 586s light known speed (300000 km/s) travels 175.8 million km
BUT
175.8 million km x 2π = 1104 million (this value should be used by Earth as a period) 
680 million km            = Venus Orbital Circumference
(3) Earth Motion
During 810s light its speed (1.16 million km per second) travels 940 million km
During 810s light known speed (300000 km/s) travels 243 million km
243 million km x 2π = 1526 million (this value should be used by Jupiter as a period) 
Where 940 million km       = Earth Orbital Circumference
BUT
During 940s light its (1.16 million km per second) travels 1104 million km (error 1%)
That shows the direction reflection between the Earth and Venus because of the reflection of energy- I proved that in point no. (**)
Notice –
Jupiter is the next planet after the Earth based on the light motion design for that the Earth value (1526 million km) should be used by Jupiter because Mars is a migrant planet and Mars original orbit was between Mercury and Venus and the next planet for the Earth was Jupiter- the confusion in data is made by Mars migration effect
(More explanation is provided in the comment on the data)
(4) Mars Motion
(Mars Is Exceptional)
During 1235s light its speed (1.16 million km per second) travels 1433 million km
During 1235s light known speed (300000 km/s) travels 371 million km = 2π x 59 mkm Where 1433 mkm = Mars Orbital Circumference
(5) Jupiter Motion
During 4224s light its speed (1.16 million km per second) travels 4900 million km
During 4224s light known speed (300000 km/s) travels 1267 million km –
4900 mkm  =Jupiter Orbital Circumference
1267 million km x 2π = 7960 million km (this value be used by Saturn as a period) 
Notice
Mars is a migrant planet for that – the Earth value isn't used for Mars orbit- but it's used for Jupiter orbit- and because of the reflection between Venus and the Earth- the Earth produces the value directly (1526 million km) without using the light speed (1.16 million km per second) where
1526 million km = Jupiter Orbital Distance 778.6 million km x 2 (error 2%) 
Notice
During 4224s light its speed (1.16 million km per second) travels 4900 million km
4900 million km = Jupiter orbital circumference while 4222.6 hours = Mercury day period- if (one hour of Mercury = One second of light clock) that will connect Jupiter with Mercury strongly- this is a fact because- the solar system depends on Mercury clock in its motion and the planets orbits are defined based on Jupiter orbit after the planets migration- that makes Mercury and Jupiter the two heads of the solar system unified motion. 
(6) Saturn Motion
During 7960s light its speed (1.16 million km per second) travels 9007 million km
During 7960s light known speed (300000 km/s) travels 2388 million km
9007 mkm = Saturn Orbital Circumference
2388 million km x 2π =15004 million km (this value be used by Uranus as a period) 
(7) Uranus Motion
During 15559s light its speed (1.16 million km per second) travels 18048 million km
During 15559s light known speed (300000 km/s) travels 4668 million km
18048 mkm = Uranus Orbital Circumference
4664 million km x 2π =29305 million km (this value be used by Pluto as a period) 
Notice
The transported value from Saturn is 15004 but the used value is 15559 (error 3.5%)
(8) Neptune Motion
(Neptune is exceptional)
During 24348s light its speed (1.16 million km per second) travels 28244 million km
During 24348s light known speed (300000 km/s) travels 7305 million km
28244 mkm = Neptune Orbital Circumference
(9) Pluto Motion
During 31983s light its speed (1.16 million km per second) travels 37100 million km
During 31983s light known speed (300000 km/s) travels 9595 million km
37100 mkm  = Pluto Orbital Circumference
(10) The Earth Moon Motion
During 639s light its speed (1.16 million km per second) travels 724 million km
During 639s light known speed (300000 km/s) travels 191.6 million km = 2π x 30.5 mkm – BUT  
30.5 mkm     = 88000 km x 346.6 days
The moon displacements total during 346.6 (solar days) = 30.5 mkm
346.6 solar days= The nodal year and  88000 km     = The moon displacement daily
742 mkm = The distance is passed by Uranus in 30589 hours -  The data tells, the moon orbit regression be done by effect of Uranus motion.
THE COMMENTS ON DATA
(1)
We should note that, the data follows the rule perfectly- as we see in Mercury and Saturn data – the confusion in data is found by the planets migration – let's prove that
680 mkm (Venus Orbital Circumference) x (1.16 mkm/s) ^2 = 940 mkm
28244 mkm (Neptune Orbital Circumference) x (1.16 mkm/s) ^2 = 37100 mkm
(Max error 2.5 %)
940 mkm = Earth Orbital Circumference
37100 mkm = Pluto Orbital Circumference
Clearly the confusion of data is done for the Earth and Jupiter (Mars migration effect) and for Pluto and Neptune and Uranus (Pluto migration effect)
Shortly
The light (1.16 million km per second) created the solar system distances based on one another as the chess board distances- perfectly the light created the distances based on one geometrical design and as one network- But – The planets migration caused confusion for the data- by that the planets orbits data is confused and no longer be seen as designed by the light motion- specially because the solar system design repair needed to make Jupiter orbit as the central orbit based on which all planets orbits are modified- by that– the discovery for the light motion effect on the solar system distances creation needed deep analysis in data to remove the confusion.
Notice
The Earth data produced the value (1526 mkm) and this distance is used by Jupiter as a distance (1526 mkm = 2 x 778.6 mkm Jupiter Orbital Distance) (error 2%)
And
Uranus data produced the value (29305 mkm) and this distance is used by Neptune as a distance (29305 mkm= 28244 mkm= Neptune Orbital Circumference) (error 4%)
The behaviors are typical tell that by the same effect the modifications of both planets data are done- 
Notice
680 sec x 1.16 million km /sec = 789 mkm (Jupiter orbital distance 778.6 mkm error 1.3%) – the data shows – Jupiter is the mentioned planet after the Earth because Mars original orbit was between Mercury and Venus by that the light motion moved from the Earth to Jupiter directly- Mars is not seen in this motion-
(2)
The inner planets distances ( 93.1, 175.8, 243, 370.6) can be used as cycles periods
175.8 solar days =Mercury day period
243    solar days = Venus rotation period
370.6 solar days are near to 365.25 days (error 1.5%),
(93.1 days x 2π= 584 days =the period of periodical meeting of Earth and Venus)
This equality depends on the rate 1mkm = 1 day
That  tells each planet creates its PREVIOUS NEIGHBOR CYCLE PERIOD
And the outer planets distances in blue color (1267, 2330 , 4664, 7305, 9595)
2330 = 2 x 1165             = 2π x 371
4664  = 4 x 1165             = 4π x 371
7305 = 2π x 1165           =2π2 x  371
9595 = 8 x 1165            = 8 π x  371                                                 (error 3%)
This data cornerstone is the number (371), (the Earth year 365.25 days)
The data refers to the Earth year because of the Earth effect on the sun creation
NOTICE
The data proves each planet orbit is defined based on its neighbor – my first equation (Planet orbital distance equation) proves this fact –
In following I put my planet orbital distance equation for revision
Planet Orbital Distance Equation
(My First Equation)  (d)2 = 4 x d0 x (d- d0)  
d = A Planet Orbital Distance
d0= Its Direct Previous Neighbor Planet Orbital Distance
The equation depends on the planets order, for that , just 2 neighbor planets can be used in this equation, means if (d is Venus distance, d0 be Mercury distance) 
The equation exceptions are,
Earth depends on Mercury Not Venus – and Mars depends on Venus Not Earth And Pluto depends on Uranus Not Neptune
Note, we don't use the forma (d=2d0) instead we use the forma (d2 = 4d0 (d-d0)) because it uses the distance between the 2 planets and that decreases the errors
Let's test the equation
(1) Venus Motion
(108.2)2 = 4 x 57.9 x (50.3)                                        
d= 108.2 million km  = Venus Orbital Distance
d0= 57.9 million km    = Mercury Orbital Distance
50.3 million km          = The Distance Between Venus And Mercury 
Venus Depends On Mercury
(2) Earth Motion
(149.6)2 = 4 x 57.9 x (149.6-57.9)                                                  (error 2.8%)
d= 149.6 million km  = Earth Orbital Distance
d0= 57.9 million km   = Mercury Orbital Distance
Earth depends on Mercury and doesn't on Venus 
(3) Mars Motion
(227.9)2 = 4 x 108.2 x (227.9-108.2)                          
d= 227.9 million km   = Mars Orbital Distance
d0= 108.2 million km = Venus Orbital Distance
Mars depends on Venus and doesn't on Earth 
(4) Ceres Motion
(415)2 = 4 x 227.9 x (415-227.9)                      
d=  415  million km      = Ceres Orbital Distance
d0=  227.9 million km = Mars Orbital Distance
Ceres depends on Mars
(5) Jupiter Motion
(778.6)2 = 4 x 415 x (778.6- 415)                     
d= 778.6 million km = Jupiter Orbital Distance    
d0= 415 million km = Ceres Orbital Distance
Jupiter depends on Ceres
(6) Saturn Motion
(1433.5)2 = 4 x 778.6 x (1433.5- 778.6)           
d = 1433.5 million km = Saturn Orbital Distance    
d0  = 778.6 million km = Jupiter Orbital Distance
Saturn depends on Jupiter
(7) Uranus Motion
(2872.5)2 = 4 x 1433.5 x (2872.5- 1433.5)                  
d= 2872.5 million km = Uranus Orbital Distance    
d0 = 1433.5 million km = Saturn Orbital Distance  Uranus depends on Saturn
(8) Neptune Motion                                                                          (error 4%)
(4495.1)2 = 4 x 2872.5 x (4495.1- 2872.5)
d= 4495.1 million km = Neptune Orbital Distance    
d0 = 2872.5 million km = Uranus Orbital Distance     Neptune depends on Uranus
(9) Pluto Motion
(5906)2 = 4 x 2872.5 x (5906- 2872.5)
d= 5906 mkm = Pluto Orbital Distance    
d0 = 4495.1mkm = Neptune Orbital Distance     Pluto depends on Uranus
Notice the error is less 1% for all planets except (Earth 2.8%) and Neptune (4%)  
The Equation Discussion
(a)
The Equation tells each planet orbital distance depends on its previous neighbor planet orbital distance – but – there are 3 exceptions which are –
Earth depends on Mercury not Venus –
Mars depends on Venus not Earth–
Pluto depends on Uranus not Neptune–
(b) 
The equation shows – the distance from the sun to Pluto be distributed based on one geometrical design – means – the distances be created together as one group in one a network form – the distances be similar to the chess board distances- they are distributed geometrically and in one network based on one design -
Shortly
No Single Distance be Created independently or individually – We deal with one network of distances - 
Means
By Using Mercury Orbital Distance (57.9 million km) (one data) We Can Conclude All Planets Orbital Distances (9 Data) By Using Mathematical Calculations Only
(c)
Kepler stated (Planet orbit defines its velocity) – this concept is used in my third equation (d1/d2) = (v2/v1)2 where  d= Planet Orbital Distance and v = Planet Velocity
The concept tells– If we know a planet orbital distance, we can conclude its velocity by mathematical calculations only    
Shortly
By Using my 1st equation (d2 = 4d0 (d-d0)) and kepler law and the One Data (Mercury orbital distance = 57.9 million km) we can conclude by mathematical calculations only All Planets Orbital Distances, Velocities And Periods (27 Data)
That proves the concept (Planet data be created based on exact equations)
Planet Orbits Are Defined By Very Accurate System
Each planet orbit is defined based on an angle, these angles are reflected also – let's prove that  (I suppose –There's a right triangle by the three points The Sun, Mercury and Venus) - Now
Venus angle is (61 degrees) because Venus orbital distance (108.2 mkm) x cos (61) = Venus Mercury distance (50.3 mkm) -
Here we can replace Venus with any other planet in the same triangle to define this planet angle based on similar calculation – as a result
Earth angle is (51 degrees) because Earth orbital distance (149.6 mkm) x cos (51) = Earth Mercury distance (91.7 mkm)
Mars angle is (41.7 degrees) because Mars orbital distance (227.9mkm) x cos (41.7)= Mars Mercury distance (170 mkm)
Jupiter angle is (22.2 degrees) because Jupiter orbital distance (778.6 mkm) x cos (22.2)= Jupiter Mercury distance (721 mkm)
Similar to that – Saturn angle is 16.5, Uranus angle is 11.6 deg, Neptune angle is 9.2 deg and Pluto angle is 8 deg- these angles follow the same system – for example
Pluto angle is (8 degrees) because Pluto orbital distance (5906 mkm) x cos (8)= Pluto Mercury distance (5848 mkm)
NOTICE No. (1) The right angle and its triangle is (a hypothesis) – we Can prove it because (v1/v2) = (θ1/ θ2)
means – these angles are rated with their planets velocities – for example
(Neptune velocity 5.4/ Pluto velocity 4.7) = (9.2 deg /8 deg)
Shortly -the angles which are defined based on the sun perpendicularity on Mercury orbit – all of them- are the correct angles by which the planets orbits are defined – that because the planets velocities are rated with these angles and Kepler stated (Planet orbit defines its velocity)- means- the planets orbits are defined based on these angles and that causes the angles rates to be equal with the velocities rates - Shortly -That tells indeed the sun position is perpendicular on the (inner planets orbits) – in fact – the sun is perpendicular on the Earth moon orbit- and this perpendicularity has effect on all inner planets because of the small distances among them. 
I-10 Jupiter distances are defined by a motion by a speed = (1.16 million km /s) Data
(1)
(1.16 million km /s) x 300 sec   = 348 mkm (300 mkm = Earth orbital distance x 2)
(1.16 million km /s) x 348 sec   = 470 mkm (470 x2 = Earth Orbital Circumference)
(1.16 million km /s) x 470 sec   = 551 mkm                       (Mars Jupiter Distance)
(1.16 million km /s) x 551 sec   = 629 mkm                       (Earth Jupiter Distance)
(1.16 million km /s) x 629 sec   = 721 mkm                       (Mercury Jupiter Distance)
(2)
(1.16 million km /s) x 108.2 sec x 4 = 500 mkm        (108.2 = Venus orbital Distance)
(1.16 million km /s) x 500 sec   = 580 mkm                      
(1.16 million km /s) x 580 sec   = 671 mkm                       (Venus Jupiter Distance)
(1.16 million km /s) x 671 sec   = 778.6 mkm                    (Jupiter Orbital Distance)
(1.16 million km /s) x 778.6 sec x 2    = 1806 mkm
(1.16 million km /s) x 1806 sec           = 2094 mkm          (Jupiter Uranus Distance)
(1.16 million km /s) x 2094 sec           = 4900 mkm/2  (Jupiter Orb. Circumference)
(3)
(1.16 million km /s) x 5127 sec = 5906 mkm                    (Pluto orbital Distance)
(1.16 million km /s) x 4437 sec = 5127 mkm                   (Pluto Jupiter Distance) 
(1.16 million km /s) x 3825 sec = 4437 mkm                   (Mercury Neptune Distance)
(1.16 million km /s) x 3244 sec = 3825 mkm  (=π x 1205 mkm Mars Saturn Distance)
(1.16 million km /s) x2872sec=3244mkm (=2x1622 mkm Uranus Neptune Distance)
(1.16 million km /s) x4900sec=2 x 2872 mkm (Uranus Orbital Distance)
(4)
(1.16)2 x 170 sec             = 227.9 mkm                            (Mars Orbital Distance)
Where 170 mkm = Mercury mars Distance
(5)
(1.16 million km /s) x 1980 sec           = 2296.8 mkm
(1.16 million km /s) x 2296.8 sec        = 2644.6 mkm       (Mars Uranus Distance)
(1.16 million km /s) x 2644.5 sec        = 3033.5 mkm       (Uranus Pluto Distance)
1980 million km = the orbital circumferences total of (Mercury + Venus + Earth)
(6)
(1.16 million km /s) x 3717 sec           = 4310 mkm          (Earth Neptune Distance)
(1.16 million km /s) x 4346 sec           = 5040 mkm          (Jupiter Pluto Distance)
3717 mkm = Jupiter Neptune Distance –
(Earth Neptune Distance 4345mkm "error 1%" and Jupiter Pluto dis. 5127 mkm error 1.7%)
Discussion - the data tells the idea clearly, it tells 
The distances in the solar system is created together based on one design and by one motion- this one motion is the light motion (1.16 million km per second) and the light creates the distance and after that the light uses the created distance as a period of time to create another distance, and by that, the light created all distances in one network together based on one geometrical design and this creation of the distances is done before any planet creation- the data clearly and strongly proves the hypothesis. 
NOTICE - The total distances in the solar system (the orbital and inner distances) are 45 distances, the previous data used almost 50% of these distances (because many distances are equal in the solar group – for example – (Saturn orbital distance = Mars orbital circumference)- this distances equality makes the previous data behave in place of around 50% of all distances- and no logic to suppose these all distances are rated by the way with the rate (1.16)!!
The logical explanation is my theory I have explained- the light (1.16 million km per second) creates the distances based on one another by using the distances as periods of time - Also this behaviors is typical to the behavior of the known speed of light (300000 km/s)– as we have seen before - During 2094 seconds the light (300000 km/s) moves 629 million km (=Jupiter Earth distance) where 2094 million km (= Jupiter Uranus distance)- Simply it's typical behaviors tells the fact that the speed 1.16 million km per second is real fact and used in the solar system design)   
I-11 The Solar System Geometrical Design Proves The Hypothesis
Data (1)
(A) (1.16/0.3) x 2π = 24.3
(B) 1.16 million km per second x 86400 seconds = 100733 million km
(100733 million km = The Planets Orbital Circumferences Total)
Data (2)
(a) 4224 x 1.16 =4900
(b) 100733 = π x 32200                                        
(c) 1.1318/0.3 = 5906 / (778.6 /2)  
Discussion
Data (1)
Data no. (A) - (1.16/0.3) x 2π = 24.3
By this equation the space and time are created- because it shows the coherence of light between the light (1.16 million km per second) and the light (300000 km/s)
The equation tells – the space is created in curves (2π) and the time is created in units each unit = (24 hours)
Shortly- the time essential units are 2 units (the second and 24 hours) because of the rate of time (one second of light clock = 24 hours of planet clock) by that the period of the (one second) (for light motion) is comparable with (24 hours) for planet motion that means- the period (24 hours) is one unit can't be divided and it's similar to the second period which is a unit can't be divided
Data no.(B) 1.16 million km per second x 86400 seconds = 100733 million km
The data tells the light (1.16 million km per second) moves in solar day (24 hours=  86400 seconds) a distance = 100733 million km = The Planets Orbital Circumferences Total - that proves the solar planets orbits creation is done by the motion of this light beam (1.16 million km per second) - the data proves the solar system design depends on this light motion.
Data (2)
Data no. (a) 4224 x 1.16 =4900
The data tells, the light (1.16 million km per second) moves in 4224 seconds a distance = 4900 million km = Jupiter Orbital Circumference
But – Mercury day period is 4222.6 hours (4224 hours approximately)
If (one second of light clock = one hour of Mercury clock), that will make the period (4224 s) as Mercury day period – and – we know that Mercury day period is the main period in the solar system because the sun rate of time is created based on it as I explain in the second and fourth hypotheses of this paper-
Shortly- while Mercury is the solar system head- Mercury day period is the main period in the solar system and this period is used for Jupiter orbital circumference because all planets orbits are defined based on Jupiter orbit after the planets migration- this fact is discussed in the third hypothesis is details – let's summarize it
Mars original orbit was between Mercury and Venus, and Pluto was the Mercury moon, and Pluto size was equal Mercury size- But- Mars and Pluto had migrated from their orbits- the planets migration caused serious risk for the solar system geometrical design- And Uranus provides a vertical effect on Jupiter to fix it in its orbit and prevent Jupiter to migrate with the migrant planets- after Jupiter be fixed in its orbit all other planets redefined their orbits according to Jupiter orbit – by that – Jupiter orbit be the most important distance in the solar system-  
Notice- later Uranus caused to create Saturn to support Jupiter role- Saturn creation is done after the Earth moon creation because the energy reflection caused this delaying  
The data shows how the solar system design depends on Jupiter orbit
Data no. (b) 100733 = π x 32200
32200 million km = the different distance between Pluto orbital circumference and Jupiter orbital circumference
100733 million km = The Planets Orbital Circumferences Total
The data supports the same idea- Jupiter and Pluto orbits create the general design of the solar system- because Jupiter is the main orbit in it and Pluto the last orbit.  
Data no. (c) 1.1318/0.3 = 5906 / (778.6 x 2)  where
5906 million km              = Pluto orbital distance
778.6 million km             = Jupiter orbital distance
1.1318 million km      ��    = Jupiter motion distance per solar day
0.3 million km                = speed of light 300000 km/s
The data shows the distribution of Jupiter and Pluto orbits are in proportionality with speed of light (300000 km/s) and speed of (1.16 million km per second)
BUT the data shows Jupiter velocity daily (1.1318 million km per day) in place of the speed of light (1.16 million km per second) Why??
Another question asks (Why do all Jupiter distances depend on the speed of light 1.16 million km per second?) as we have seen in the previous proof No. (1-10)?
The story told the facts, Uranus provided effect on Jupiter and as a result Jupiter orbit be used as the main orbit in the solar system- BUT- what's this effect Uranus provided on Jupiter? What had happened really?
Uranus sent a light beam its speed (1.16 million km per second) to Jupiter for that Uranus velocity and Jupiter velocity both depends on the speed (1.16 million km per second)
Jupiter should move a distance 1.16 million km per solar day (24h) BUT Mars effect created more problems and caused Jupiter to use (Mars rotation period 24.6h) in place of the solar day and decreased the velocity with 2.5%
Uranus moves a distance 1.16 million km (in TWO solar days- error 1.3%)
The solar system basic design depends on (two seconds and not one second) as I explained in details in the fourth hypothesis of this paper- now – the system design uses two seconds in place of one second because Uranus moves the required distance 1.16 million in two days
Shortly – the force which is sent from Uranus to Jupiter was a light beam its speed 1.16 million km per second and by this force Jupiter helped the solar system and supported the planets in their orbits to prevent more migration in the solar system
I-12 The Solar System Distances Analysis Prove The Hypothesis
DATA (No. I)
50% Of All Distances In The Solar System Are Equal One Another (WHY?)
 (1)
Saturn Orbital Distance = Saturn Uranus Distance =1433 million km =
                                      = Mars Orbital Circumference 
                                      = Pluto Neptune Distance         (error 1.5%)
          = Pluto eccentricity Distance     (error 1.5%)
= Neptune Orbital Distance/π
= Uranus Orbital Distance /2
= Mercury Jupiter Distance x 2     
(2)
Neptune Orbital Distance     = Saturn Pluto Distance
Jupiter Pluto Distance          = Uranus Neptune Circumference
Earth Neptune Distance       = Mercury Saturn Circumference  (0.5%)
(3)
Jupiter Mercury Distance     = 2 Mercury Orbital Circumference
Jupiter Venus Distance        = Venus Orbital Circumference   (1.5%)
Jupiter Earth Distance          = Earth Orbital Circumference   (1.2%)
(Earth and Jupiter at 2 different sides from the sun)
(4)
Jupiter Mercury Distance     = Mars Orbital Distance x π      (0.6%)
Jupiter Uranus Distance       = Venus Jupiter Circumference  (0.8%)
Pluto Orbital Distance          = Earth Orbital Circumference x 2π
DISCUSSION
The data tells these distances must be created based on each other because all of them are parts in one design and one network- the data tells – it's impossible for these distances to be created univocally nor independently – but they are created by one motion based on one design and for one result. 
DATA (No. II)
(778.6/721)=(721/670)= (670/629)=(1433/1325)=(1284/1205)= (2872/2644)= 1.0725
These are distances measured in millions km – let's define them
778.6, 721, 670 and 629 are the distances between Jupiter and the sun, Mercury, Venus and the Earth respectively.
1433, 1325, 1284, 1025 are the distances between Saturn and the sun, Venus, the Earth and Mars respectively.
2872 and 2644 are the distances between Uranus and the sun and Mars respectively.
MORE DATA (No. I)
629 million km (The Earth Jupiter distance)= (1.0725)^2 x 551 million km (Jupiter Mars Distance)
4495.1 million km (Neptune Orbital Distance) =1.0725 x 2 x 2094 million km (Jupiter Uranus Distance)
5906 million km (Pluto Orbital Distance) = (1.0725)^2 x 5127 million km (Jupiter Pluto Distance)
5127 million km (Jupiter Pluto Distance)= (1.0725)^2 x 4437 million km (Mercury Neptune Distance)
2.574 million km (Earth motion distance daily) = 1.0725 x 2.4 million km (TheMoon Orbital Circumference)
DISCUSSION
These distances are rated each other with (1.0725) this rate is created by Lorentz length contraction effect (as I supposed and proved)- but – regardless this rate reason the question is – How can all these distances be effected by this rate together?
That can be possible only if (these distances are parts of one design and this design is effected by this rate as a result all distances be effected together)   
The data proves the distances are created together based on one design and the distances are effected together by the same one effect – shortly- these distance can NOT be independent from one another but they are one group created based on one design.
I-13 Deep Analysis For The Planets Orbits
The Light Uses Each Planet Orbital Period To Move A Distance = This Planet Orbit + All Previous Planets Orbits Total
DATA
(1)
14 x 24 x (300000 km/s)           = 100.8 million km = 2 x 50.4
(2)
35.76 x 24 x (300000 km/s)      = 258 million km = 149.6 + 108.2
(3)
58.1 x 24 x (300000 km/s)         = 418 million km = 149.6 + (2 x 108.2) + 58
(4)
109.3 x 24 x (300000 km/s)       =787 million km = 58+ 108+149.6 +2 x228 (error 2%)
(5)
687 x 24 x (300000 km/s)          = 4900 million km
(6)
687 x 24 x (300000 km/s)          = 4900 million km
(7)
1710 x 24 x (300000 km/s)        = 12312 million km = 28244/(1.16 x2)
(8)
4868 x 24 x (300000 km/s)        = 17600 million km x 2
(9)
9517 x 24 x (300000 km/s)        = 68522 million km = 2 x 18048 + 32400
(10) 
14413 x 24 x (300000 km/s)      = 103773 million km
DISCUSSION
The data shows the rule (Planet Orbital Period "days"/2π) x 24 x Speed Of Light (300000 km/s) = A Distance = This Planet Orbital Circumference + All Previous Planets Orbital Circumferences Total – let's prove this rule in following
(1) Pluto Data
90560 days (Pluto orbital period) /(2π) = 14413 days
14413 x 24 x 300000 km/s = 103773 million km
The planets orbital circumferences total is 100733 million km  
Between 103773 mkm and 100733 mkm the error is (3%)
Pluto follows the rule perfectly- the light passes a distance = Pluto orbital circumference + all previous planets orbital circumferences = the planets orbital circumferences total
(2) Neptune Data
59800 days (Neptune orbital period) /(2π) = 9517 days
9517 x 24 x 300000 km/s = 68526 million km = (2 x 18048) + 32400
The distance 2 x 18048 million km = all planets orbital circumferences total before Neptune
32400 mkm = 1.16 mkm/s x 28244 seconds 
28244 million km = Neptune orbital circumference
Neptune follows the rule perfectly but because of the energy reflection the speed (1.16 mkm/s) is used one additional time- clearly we see Neptune follows perfectly the rule   
(3) Uranus Data
30589 days (Uranus orbital period) /(2π) = 4868 days
4868 x 24 x 300000 km/s = 17600 million km x 2
18048 million km (Uranus Orbital Circumference) (error 2.5%)
Uranus follows the rule perfectly because Uranus orbital circumference =18048 mkm and all previous planets orbital circumferences total is = 18048 mkm
(4) Saturn Data
10747 days (Saturn orbital period) /(2π) = 1710 days
1710 x 24 x 300000 km/s = 12312 million km
Jupiter orbit (4900) + Saturn orbit (9000) = 14000 million km
Light (1.16 million km/s) x 12312 seconds = 14282 million km
Means
The value (12312) equal (Jupiter orbital circumference)+Saturn orbital circumference
But the reflection of energy uses the speed of light (1.16) to have effect on the data
That tells Saturn follows the rule
Notice
12312 sec x 1.16 mkm/s = 14282 mkm = 28244 mkm/2
28244 mkm = Neptune orbital circumference – that tells the confusion in Saturn data is done by Neptune orbit effect   
Notice
We see the speed of light (1.16 mkm/s) has effect on Saturn data by division (12312 = 14282/1.16) but in Neptune data we have seen the speed of light (1.16 mkm/s) has effect by multiplication (28244 x 1.16 = 32400)
That tells we have opposite positions between (Neptune and Saturn) and the light connects them together by one motion- 
The data tells simply (A x 1.16 and B/1.16) this is effect of one light beam motion through both points.
(6) Jupiter Data
4331 days (Jupiter orbital period) /(2π) = 687 days
687 x 24 x 300000 km/s = 4900 million km
Jupiter orbital circumference = 4900 million km
The distance equal Jupiter orbital circumference only without the previous planets BUT - The inner planets orbital circumferences total be = 4900 million km
Let's prove that
360 (Mercury) + 680 (Venus) +940 (Earth) + 1433 (Mars) = 3413 million km
4900 million km – 3413 million km = 1433 million km
That tells – the data supposes the Earth moon orbital circumference around the sun = Mars orbital circumference = 1433 million km
By that 360 + 680 +940 + 1433 + 1433 = 4846 million km = Jupiter orbital circumference (4900 mkm) (error 1%)
(7)Mars  Data
687 days (Mars orbital period) /(2π) = 109.3 days
109.3 x 24 x 300000 km/s = 787 million km = Jupiter orbital distance 778.6 million km  (error 2%)
778.6 million km= 57.9 mkm + 108.2 mkm + 149.6 mkm + 227.9 mkm+ 227.9 mkm
Means- Mars Value (787 = 778 = the four inner planets orbital distances total + the Earth moon orbital distance to the sun (which is considered = Mars orbital distance)
Here the value provided the distances total and not the circumferences total
But Mars follows the rule perfectly because
The value (778) = the 5 planets orbital distances total
(8)Earth Data
365.25 days (Earth orbital period) /(2π) = 58.1 days
58.1 x 24 x 300000 km/s = 418 million km = 149.6 mkm (Earth orbital distance) + 2 x 108.2 mkm (Venus orbital distance) + 57.9 mkm (Mercury orbital distance)
The Earth follows the rule- the modification can be done by the moon effect on the earth motion.
(9)Venus  Data
224.7 days (Earth orbital period) /(2π) = 35.76 days
35.76 x 24 x (300000 km/s)= 258 million km = 149.6 mkm  (Earth orbital distance)+ 108.2 mkm (Venus orbital distance)
(10)Mercury Data
88 days (Earth orbital period) /(2π) = 14 days
14 x 24 x (300000 km/s)  = 100.8 million km = 2 x 50.4  
50.4 million km = Mercury Venus Distance
The Comment On The Data
(1)
We notice a deep interaction between Mars and Jupiter where Jupiter orbital period (4331 days /2π)= 687 days (Mars orbital period)  
And Mars value (109.3 days) enables the light to pass a distance 778.6 mkm
109.3 x 24 x 300000 km/s = 778.6 million km (Jupiter orbital distance) 
That shows deep interaction between Mars and Jupiter which is logical behavior because Mars is a migrant planet and Mars created an interaction with Jupiter to enable Mars to stay in its New orbit and prevent any more migration.
(2)
Mars orbital period 687 days = 88 (Mercury) + 224.7 (Venus) + 365.25 (Earth)
(error 1.5%)
Notice - 551 mkm (Mars Jupiter distance) = 57.9 mkm (Mercury orbital distance) + 108.2 mkm (Venus orbital distance) + 149.6 mkm (Earth orbital distance) + 227.9 mkm (Mars orbital distance) (error 1.5%)
(3)
The data shows very important fact
The data tells that (The Light Motion Is The Main Player Behind All Data)
Let's use the sea water as example
The sea water motion is the main player behind the sea waves, the ship sailing, the fish swimming and the cause for any motion in the sea - Different forms of motions in the sea we can discover but the motion reason and motor is the same one reason and motor –  This is the useful result of this data- it's simply a major proof for my theory- the light motion is the reason behind all planets motions and data-
Notice - Why Is The Planets Data Analysis Method Important?
The planets data analysis makes some anatomy for the planets data, by that, we can know how this planet data is created and what geometrical reason caused to create this data- the planets data analysis also enable us to discover if a planet violates a rule used by the other planets- and it shows the geometrical reason behind this violation-
1-14 Light defines each planet orbital period
The light defines each planet orbital period based on this planet diameter
Data
142984 s x (0.3)^2 = 12868 = π x 4331 (error 5%)
120536 s x (0.3)^2 = 10747
51118 s x (0.3)      = 30589/2
49528 s x (0.3)^2   = 4457
7510 s x (0.3) x 4π^2 = 88945 (= 90560 error 1.8%) (notice 7510 x 4π^2 =296483)
6792 s x (0.3)^2    = 611
7510 s x (0.3)^2    = 676 = 687 (error 1.5%)
12756 s x (0.3)^2   = 1148 = π x 365.25
12104 s x (0.3)^2   = 1089 = (π^2)/2 x 224.7
4879 s x (0.3)^2    = 439 = (π^2)/2 x 88
Notice
7070 s x (0.3)^2    = 637 = 687 / 1.0725
Where
(1)
The left side data is the planets diameters, in details
142984 km, 120536 km, 51118 km, 49528 km and 7510 km are the diameters of (Jupiter, Saturn, Uranus and Neptune respectively and 7510km =Pluto circumference)
And
6792 km, 12756 km, 12014 km and 4879 km are the diameters of (Mars, Earth, Venus and Mercury respectively) – all diameters are used as periods of time with the rate (1 km = 1 second) - The periods are used by light known speed (300000 km/s)
(2)
The right side is the planets orbital periods
12868 = π x 4331 (error 5%) (4331 days = Jupiter orbital period)
10747 days = Saturn orbital period
30589 days = Uranus orbital period
90560 days = Pluto orbital period
Notice
4457 million km = Neptune orbital distance
That shows Neptune produced its orbital distance in place of its orbital period based on the same rule proves that Neptune is found on the opposite direction to the other planets.
687 days      = Mars orbital period (with 611 the error 12%)!
1148 days    = π x 365.25 days (Earth Orbital Period)
1089 days  = (π^2)/2 x 224.7 days (Venus Orbital Period)
439              = (π^2)/2 x 88 days (Mercury Orbital Period)
Notice
7070 s x (0.3)^2    = 637 = 687 / 1.0725
7070 km was Mars original diameter before its migration- and the rate 1.0725 is found by Lorentz length contraction effect.
 The Comment On The Data
The data shows the following
Light Motion Connects Each Planet Diameter With Its Orbital Period
The equation modifications can NOT refute the theory because the modifications depend on geometrical constant as (π), or depend on the using of (C) or (C^2)- these values can't be considered new values nor change the rule because they are geometrical constants which shows modifications are done for the energy- for example- the energy reflection causes to square the speed, by that, the planets which us (C) have no reflection of energy but the planets use (C^2) are suffered from the energy reflection- Shortly- the modifications can't refute the theory- means- the data tells – planet orbital period is defined based on this planet diameter by effect of the speed of light
I-15 Can Planet Diameter Be Used As A Period Of Time
DATA
Jupiter (13.1 km/s) moves during 10921 s a distance = 142984 km = Jupiter diameter
Uranus (6.8 km/s) moves during 7510 s a distance =51118 km = Uranus diameter
Pluto (4.7 km/s) moves during 10921 s a distance =51118 km = Uranus diameter
Pluto (4.7 km/s) moves during 51118 s a distance =2 x 102536 km = Saturn diameter
Pluto (4.7 km/s) moves during 2 x 120536 s a distance =1.1318 mkm
(1.13184 mkm = Jupiter motion distance per solar day)
Where
10921 km = The Moon Circumference 
7510 km   = Pluto Circumference
The data shows the planets diameters are used as periods of time (for planets motions) also and not only for light motion – the fact is proved simply
The Comment On The Data
(1)
My planet diameter equation proves that planet diameter is created as a period of time because the diameter is created as a function in this planet rotation period.
(2)
The previous data is example of many similar which proves the planet diameter is used as period of time.
(3)
How can the planet diameter be used as a period of time?
Planet diameter is used as a period to define another planet diameter-
The idea is that- the solar system is created from one motion (the original light beam motion)- by this one motion all planets diameters are created for that each planet diameter defines the next planet diameter.
(CONT)
Gerges Francis Tawdrous +201022532292
Physics Department-  Physics & Mathematics  Faculty 
Peoples' Friendship university of Russia – Moscow   (2010-2013)
Curriculum Vitae                  https://www.academia.edu/s/b88b0ecb7c
E-mail                            [email protected], [email protected]
                                      [email protected]                   
ORCID                          https://orcid.org/0000-0002-1041-7147
Facebook                        https://www.facebook.com/gergis.tawadrous
VK                                 https://vk.com/id696655587
Tumblr                           https://www.tumblr.com/blog/itsgerges 
Researcherid                   https://publons.com/researcher/3510834/gerges-tawadrous/
Google                                https://scholar.google.com/citations?user=2Y4ZdTUAAAAJ&hl=en
Livejournal                     https://gerges2022.livejournal.com/profile
Pocket                                                                     https://getpocket.com/@646g8dZ0p3aX5Ad1bsTr4d9THjA5p6a5b2fX99zd54g221E4bs76eBdtf6aJw5d0?src=navbar
PUBLICATIONS
box                                 https://app.box.com/s/47fwd0gshir636xt0i3wpso8lvvl8vnv
Academia                       https://rudn.academia.edu/GergesTawadrous
List of publications         http://vixra.org/author/gerges_francis_tawdrous
Slideshare                            https://www.slideshare.net/Gergesfrancis
0 notes
rubydobson12 · 1 year
Text
A New Leap Forward: The Growth Trajectory of the Epitaxy Equipment Market
 By 2023, the global epitaxy equipment market is expected to be worth $1.7 billion. Epitaxy equipment sales worldwide will grow at a CAGR of 6.0% from 2023 to 2033. The market value will exceed $3.1 billion by the end of 2033.
MOCVD equipment is still in great demand in the market. According to PMR, the targeted segment is expected to grow at a CAGR of around 5.9% between 2023 and 2033. This is because MOCVD technology has many advantages. For example, it may be advantageous to prepare high-purity film materials at low temperatures.
Key trends in the epitaxy equipment market
The epitaxy equipment market is experiencing significant trends shaping the industry. One of the key trends is the growing demand for compound semiconductors such as gallium nitride (GaN) and indium phosphide (InP), which are used in a variety of applications including power electronics, optoelectronics and wireless communications. Therefore, the need for advanced epitaxial equipment capable of achieving high-quality and high-yield epitaxial growth of these compound semiconductors is increasing.
Another prominent trend in the epitaxy equipment market is the increasing adoption of advanced technologies such as molecular beam epitaxy (MBE) and metal-organic chemical vapor deposition (MOCVD). MBE is known for its ability to produce epitaxial layers with precise thickness and composition, making it suitable for research and development of cutting-edge semiconductor devices. Meanwhile, MOCVD is widely used for mass production of epitaxial layers having excellent uniformity and is suitable for large-scale production of compound semiconductors.
In addition, the focus is on improving the productivity and efficiency of epitaxy equipment to meet the needs of the semiconductor industry. Manufacturers are integrating automation, process control and data analytics into epitaxy equipment to optimize epitaxial growth processes, reduce production costs and improve yield.
Get More insights on this: https://www.persistencemarketresearch.com/market-research/epitaxy-equipment-market.asp
0 notes
worldwideanalysis · 1 year
Link
0 notes
webionaire · 1 year
Text
LEDs produce different colors by using various materials which produce photons at different wavelengths. Those individual wavelengths appear as light of different colors.
LEDs use materials that can handle the necessary levels of electricity, heat, and humidity. High-brightness red and amber LEDs use the aluminum indium gallium phosphide (AlInGaP) material system. Blue, green and cyan LEDs use the indium gallium nitride (InGaN) system.
Together, AlInGaP and InGaN cover almost the entire light spectrum, with a gap at green-yellow and yellow. One method of achieving a larger spectrum of colors is to mix different colors of LEDs in the same device.
Combining red, green, and blue LEDs in a single LED device, such as a lighting fixture or multi-chip LED, and controlling their relative intensities can produce millions of colors. Additionally combining red, green, and blue in equal amounts produces white light.
0 notes
rohitpalan · 5 months
Text
Outshining Expectations: LED Lights Market Value to Reach US$ 87.2 Billion by 2023
The global LED Lights market is forecast to expand at 16.2% CAGR over the estimated time period, as per FMI’s analysis. The industry’s size is predicted to reach a market value of US$ 87,242.8 Million in 2023. LED lights market to reach US$ 392,675.9 Million by 2033.
The LED lights can be effectively integrated in living environments, thereby supporting the market demand for LED lights. Additionally, producers of LED lighting systems are focusing on reducing the price sans any change in the product quality.
Since homeowners are persistently striving to adopt eco-friendly practices, LEDs are becoming the choice of product. LEDs are recyclable and don’t possess mercury. Besides houses, offices too are becoming a ubiquitous LED lighting applications.
Presently, in the business world, office management team is concerned about overall well-being of the employees. They are increasingly shifting to LED lights to make offices a brighter place for employees, thereby reducing eye-fatigue and better vision in the workplace. Overall, presence of bright light increases general comfort of employees.
Get an overview of the market from industry experts to evaluate and develop growth strategies. Get your sample report here : https://www.futuremarketinsights.com/reports/sample/rep-gb-4797
The primary investment to manufacture LED lights is high owing to the raw material it utilizes. Production of LED lights necessitates the use of superior quality semiconductor materials like gallium nitride, gallium arsenide, and indium phosphide. These materials are costly. In addition to this, LED lights utilize other materials like phosphors and electronic components, that are also fairly costly.
Top Highlights of LED Lights Industry: 
The North America LED lights industry acquired a market share of 29.8% in 2022.
The United States is projected to stand out on a global as well as regional scale over the forecast period. In 2022, the market share of the United States was 16.4%.
The Europe LED lights industry procured a market share of 23.2% in 2022.
The German LED lights industry is expected to obtain a market share of 9.8%.
The United Kingdom is expected to perceive a CAGR of 12.4% in the latest time-frame.
Within Asia Pacific, India and China are anticipated to observe noticeable growth over the estimated time-frame. India is expected to expand at 17.3% CAGR and China at 14.2% CAGR.
Under the product type category, lamps are projected to grab a market share of more than 57.8% in 2023.
Based on sales channel, convenience stores segment is estimated to have the maximum share surpassing 27.5% in 2023.
Request for Methodology: https://www.futuremarketinsights.com/request-report-methodology/rep-gb-4797
Stay Updated with Recent Developments:
Nichia, in January 2023, declared the inclusion of NVSW219C-V2 and NVSW719AC to its robust-power 3535-size profile of The NVSW719AC is a completely new LED that escalates the possibility of lighting design. NVSW219C-V2, in comparison, has an unparalleled color consistency through a dome-less structure.
Infineon Technologies AG and Nichia Corporation, in January 2023, declared the debut of first-ever completely integrated micro-LED light engine for HD adaptive driving beam applications.
GE Lighting unveiled its first collection of new pendants and ornamental light fixtures with an integrated LED lighting in December 2022. The new fixtures integrated with LED lighting have the capacity to be customized.
Market Segmentation:
By Product Type:
Lamps
Luminaries
By Sales Channel:
Modern Trade
Departmental Stores
Convenience Store
E-Commerce
Other Retail Format
By Application:
Residential
Office
Industrial
Shop/ Stores
Hospitality
Outdoor
Architectural
By Key Regions covered:
North America
Latin America
Europe
Asia Pacific
The Middle East and Africa
0 notes