#Mini data logger

[shoptesto]

High-Precision Mini Temperature and Humidity Data Logger – Testo 174 H

Discover the Testo 174 H mini temperature and humidity data logger, a small and dependable solution for measuring sensitive environments like storage rooms, laboratories, and logistics. The mini temperature data logger has a USB interface and intuitive PC software, allowing easy setup and downloading of precise measurement data. Perfect for guaranteeing compliance in the food safety, pharma, and HVAC sectors, the Testo 174 H provides reliable German technology in a pocket form. Shop today at shop testo and benefit from unparalleled performance and reliability.

[americangeophysicalunion]

A Dockside Mini Observatory Keeps Watch Over a Troubled Lake 

Dear Eos:

Time-series observatories serve the vital role of monitoring ongoing ecosystem changes around the clock. Over the past 12 years (2011-2022), the Muskegon Lake Observatory buoy (MLO) has closely tracked the dynamics of thermal stratification, eutrophication, harmful algal blooms and bottom water hypoxia in Muskegon Lake – a troubled Great Lakes estuary and Area of Concern. However, lack of funding in recent years for long-term projects such as MLO has forced us to innovate to gather essential environmental data on this urbanized Great Lakes estuary that is still undergoing restoration.

We recently assembled and deployed a low-cost land-based mini observatory using reconfigured equipment from the main MLO (Mini-MLO) that monitors the changing surface water quality in Muskegon Lake every hour. Here, undergraduate student Kyle, is using a harness to hang out on the pier’s climbing ladder over the lake to change the batteries in the data logger powering the submerged sonde. The sonde has sensors that measure changes in water quality parameters such as temperature, dissolved oxygen, pH and chlorophyll that the data logger transmits to the project website www.gvsu.edu/buoy/. If we are to comprehend ongoing short-term changes due to weather and anthropogenic disturbances, and long-term changes due to climate change and ENSO, this observing science show must go on…

­– Kyle McKee, Nate Dugener, Kaylynne Dennis, Connor Gabel, Tony Weinke and Bopi Biddanda, Annis Water Resources Institute, Grand Valley State University, Muskegon, Michigan, USA www.gvsu.edu/wri/.

[takeoffprojectsservices]

Best VLSI Projects for Final Year Students

Here are some great VLSI project ideas for final-year students:

1. Image Processing System on FPGA: Algorithm, such as edge detection or image filtering should be performed through the usage of FPGAs for optimal performance.

2. Low-Power SRAM Design: Design and simulate a low-power Static Random Access Memory (SRAM) cell, targetting leakage and dynamic power dissipation.

3. Digital Signal Processor (DSP) Design: Design an example of a DSP that will allow a specific signal to be filtered or, for instance, undergo FFT.

4. Wireless Sensor Network (WSN) Protocol Implementation: Devise a VLSI based sensor node for wireless communication that will support protocols used in data transmission.

5. Reconfigurable Hardware Architecture: It is necessary to elaborate a box which is able to evolve in order to support several applications: in this context, it is possible to try to reconfigure parts of the hardware during the runtime according to the specific needs of the client application.

6. Cryptographic Hardware Accelerator: Propose and design a device for which you could use cryptographic algorithms or primitives including AES or RSA where optimization of both speed optimization and security is important.

7. System-on-Chip (SoC) Design: Selected h/w architects use Verilog or VHDL to design a including microcontroller, memory and other peripherals.

8. Artificial Neural Network (ANN) on FPGA: Devise a mini ANN for image recognition and other related work and optimally use the features of parallel processing provisioned by FPGAs.9. Automated VLSI Testing Tool: Design a testing and validation software system that has reduced time and eliminated errors in conducting tests of VLSI designs (Very Large Scale Integration).

10. Temperature Sensor with Data Logger: It will be a VLSI (Very Large Scale Integration) chip for measuring temperature and recording data, with the capability to display the data on a PC or a mobile connection.

All these project proposals present prospects to learn diverse aspects of VLSI design and implementation in addition to enhancing creativity. Choose one that you are interested in and which you can afford to do!

[svsembedded]

Weather Reporting (Temperature/Light/Humidity) using 8051 Based Microcontroller | 8051 based microcontroller | gsm based weather monitoring system project report | 8051 based data acquisition system | real time weather monitoring system using 8051 | weather monitoring system project report pdf | 8051 microcontroller projects | auto climate monitoring system project | weather detection project | weather monitoring system project report pdf | software used in iot based weather monitoring system | digital weather station | weather reporting system using arduino | gsm based greenhouse environment monitoring and controlling | automatic greenhouse environment monitoring and control.***********************************************************If You Want To Purchase the Full Working Project KITMail Us: svsembedded@gmail.comTitle Name Along With You-Tube Video LinkWe are Located at Telangana, Hyderabad, Boduppal. Project Changes also Made according to Student Requirementshttp://svsembedded.com/                  https://www.svskits.in/ http://svsembedded.in/                  http://www.svskit.com/M1: 91 9491535690                  M2: 91 7842358459 We Will Send Working Model Project KIT through DTDC / DHL / Blue Dart / First Flight Courier ServiceWe Will Provide Project Soft Data through Google Drive1. Project Abstract / Synopsis 2. Project Related Datasheets of Each Component3. Project Sample Report / Documentation4. Project Kit Circuit / Schematic Diagram 5. Project Kit Working Software Code6. Project Related Software Compilers7. Project Related Sample PPT’s8. Project Kit Photos9. Project Kit Working Video linksLatest Projects with Year Wise YouTube video Links157 Projects  https://svsembedded.com/ieee_2022.php135 Projects  https://svsembedded.com/ieee_2021.php 151 Projects  https://svsembedded.com/ieee_2020.php103 Projects  https://svsembedded.com/ieee_2019.php61 Projects    https://svsembedded.com/ieee_2018.php171 Projects  https://svsembedded.com/ieee_2017.php170 Projects  https://svsembedded.com/ieee_2016.php67 Projects    https://svsembedded.com/ieee_2015.php55 Projects    https://svsembedded.com/ieee_2014.php43 Projects    https://svsembedded.com/ieee_2013.php1100 Projects https://www.svskit.com/2022/02/900-pr...***********************************************************1. Weather Station-CSE-316 (Microcontroller Project),2. weather station using 8051,3. Weather Station System based on PIC Microcontroller,4. weather station project proposal,5. weather monitoring system using arduino,6. weather monitoring system project report pdf,7. weather monitoring system mini project,8. unique 8051 microcontroller projects,9. software used in iot based weather monitoring system,10. real time weather monitoring system using 8051,11. project report on 8051 microcontroller pdf,12. problem statement for weather monitoring system,13. mini weather station using arduino abstract,14. mini projects on 8051 microcontroller,15. microprocessor projects with source code,16. microcontroller-based data acquisition system ppt,17. microcontroller simulation projects,18. microcontroller mini projects with source code,19. microcontroller based projects for final year,20. microcontroller based data logger,21. microcontroller based data acquisition system,22. microcontroller 8051 pdf,23. iot level which is used for weather monitoring system,24. iot based weather monitoring system ppt,25. ic 8051 based data acquisition system in chemical sensor fabrication,26. How to make Weather station - SD card (PIC microcontroller),27. GSM Based Weather Station reporting System using 8051 Based Microcontroller,28. Gsm Based Weather Reporting (Temperature/Light/Humidity),29. GSM based Digital weather station | 8051 Microcontroller,30. embedded system projects using microcontroller,31. draw the architecture of 8051 microcontroller,32. DIGITAL WEATHER STATION WITH DATA STORAGE,33. digital weather station temperature light and humidity,34. Digital Weather Station | Interfacing PIC18F4550 with DHT22 and SSD1306 display,35. Digital Temperature Sensor Circuit using 8051

[vackerstore]

A temperature and humidity mini data logger is a compact electronic device designed to measure and record ambient temperature and humidity levels.

Tiny data logging device, Temperature and humidity monitoring, Miniature data logger solutions, Data logger for small spaces

Pricing and ordering the product or service Contact Us Website: https://store.vackerglobal.com/contact-us Tel / Mobile: +971 42 66 11 44 Email: sales.ae@vackerglobal.com / sales@vackerglobal.com Office Hours (UAE Time): Monday - Thursday (9AM - to - 5PM) , Friday (9AM - to - 12PM)

[advancetech05]

Buy Word Class Equipment and Tools for Electronics in Delhi

Ionised air gun neutralise static fees on several materials as well as clean the surface area using ionised compressed air. Neutralising the static charges makes it easier to blow-clean the surface and avoids dust as well as dirt fragments from being re-attracted.

Static eliminators or static ionizers remove static as well as dust as well as can counteract and clean surface areas at remote ranges. Static neutralization is a functional technique of static reduction; nevertheless complete static elimination is not readily possible.

Electrostatic field meter is utilized to situate as well as measure static charges. It is extremely small, pocket dimension and also basic to use. It has the adhering to functions which are operated by pushbuttons: Power on/off, absolutely no adjustment, Ion Equilibrium and also Hold. Utilize the hold switch to retain the display screen of the analysis.

Ion bars are developed to regulate static charge in mini-environments, laminar flow hoods and also workstations. Ionizing bars include distinct aerodynamic layout that ionizes an area without interrupting laminar circulation. Installation is quickly.

We provide Static Charge Removal system with Static System Guard. Made using luxury technology, this system is made use of to remove all opportunities of dangerous results on personnel as well as product, therefore help in providing high effectiveness in terms of manufacturing, top quality, less male hour and higher revenues. Our system is utilized by customers in various markets, ranging from Textiles.

A digital multimeter or DMM is one of the most widely utilized pieces of test devices today. DMMs are available extremely inexpensively as well as these digital multimeter can provide extremely high levels of precision when measuring the specifications within an electronics or electrical circuit. Because of this, DMMs are just one of the most vital items of test devices offered today.

A Digital clamp meter is an electric examination device that integrates a standard digital multimeter with a current sensor. Probes gauge voltage. Having a hinged jaw incorporated right into an electrical meter allows service technicians to secure the jaws around a cord.

A digital tachometer is a digital device that determines and shows the speed of a turning object. A turning object might be a bike tyre, an auto tire or a ceiling fan, or any kind of various other motor, and so on. A digital tachometer circuit comprises LCD or LED reviewed out and also a memory for storage space.

Lux meters are made use of for gauging brightness in lux, fc or cd/m ². Some lux meters are outfitted with an interior memory or data logger to document as well as conserve measurements. The dimension of light intensity with a Lux Meter is Lux meter Review ending up being increasingly essential in the office because of security worries.

Portable insulation resistance testers and also megohmmeters are designed to aid avoid hazards such as electrical shock as well as short-circuits triggered when the insulation in electric gadgets, components, and also devices made use of in plants, structures, as well as various other setups deteriorates over extended periods of use.

A soldering iron is a hand tool made use of in soldering. It provides warm to melt solder so that it can stream right into the joint between 2 job pieces. A soldering iron is made up of a warmed metal idea and also a protected handle. Home heating is usually achieved electrically, by passing an electric current (provided via an electric cable or booster cable) via a repellent heating element.

Flux Cleaner is created to remove the burnt or clear deposit that flux leaves after the heat-treating procedure is complete. When is made use of as a change for soldering electrical calls especially those that accuracy parts snugly surround taking advantage of an aerosol change eliminator gives a number of advantages over making use of a Flux cleaner in tidy kind.

A soldering station Appears complicated-- and expensive. But it's not. It's simply a soldering iron with a built-in thermostat and a huge external power supply to maintain it at a constant, hot-but-not-too-hot temperature level as it melts solder as needed. And now they're available for under $50.

The Digital Soldering as well as Desoldering Station is a high performance and multi-function station for electronic product research, manufacturing as well as rework. We generate the very best soldering as well as desoldering options including digital soldering station in India.

In any SMD Rework Station or warm air blower, there are two control handles. One control knob is to regulate circulation of Hot Air while the various other control handle is made use of to control temperature level. Hot air flows through nozzle attached to the take care of.

Soldering without any No Clean Flux is a useful option for getting rid of the tedious message solder cleaning utilizing pricey as well as also contaminating CFC solvent cleaning. No Clean Change are reduced strong (much less than 5%) changes, especially produced for SMDs and also blended technology soldering.

VOC-free Flux use water as the leading solvent. Along with restricting the quantity of volatile organic compounds (VOC) right into the atmosphere, sometimes associated with international warming, VOC-free Flux is also non-flammable.

An Electric screwdriver is a tool, guidebook or powered, for screwing as well as helping to loosen (positioning as well as additionally eliminating) screws. A regular simple Electric screwdriver has a take care of along with a shaft, ending in a suggestion the individual takes right into the screw head prior to changing the handle.

Pneumatic Screwdriver use compressed air and also ideal for low-torque applications such as woodworking or sheet steel repairing.

Digital screwdrivers made for accuracy application as well as measurement of torque in manufacturing as well as lab settings. Digital as well as dial torque screwdrivers in supply for a wide variety of applications.

Torque meter is readily available in two different versions: portable meters or table leading meters. Torque meter have a wide variety of applications. Portable torque meter is generally made use of for industry while table leading torque meter is the suitable tool Torque meter summary for research laboratories.

 Epoxy Dispenser Option

The Epoxy Dispenser is a regulated system. The epoxy dispenser has a Rotating Layout Positive Variation Pump with a brand-new better resolution electric motor. This indicates has even far better performance.

Use of Desoldering Wick

Use of Disordering Wick variety from actually minute straight-forward jobs to tough applications based upon the need as well as additionally application, numerous Wick are conveniently available, varying in power usage, temperature level array, microcontroller (MCU) based control as well as additionally various other features.

Soldering robo automate the Manual soldering process. A soldering iron installed throughout effect of the robotic is relocated to previously configured placements, where it will certainly solder the joint. The required solder in the kind of readily available solder cable is being fed through solder cord feeders to the joint to be made.

How to Use of a Solder Pot

Solder pots are little, temperature-controlled pots or containers with flared lips that are made use of two tin cords as well as soldering tips. Solder pots also are especially useful for dipping electronics such as printed motherboard (PCBs) with through-hole leaded elements. Solder pots are utilized in smaller sized commercial applications or in nations where modern technology isn't as easily accessed.

If you have any questions, please contact us at ajay@advancetech.co.in or +91-9599592691. We at Advance Tech Services (P) Ltd, offers Equipment, Tools & Consumables for Electrical, Electronics, Automobile, Pharma Industry and other commercial applications, including Electronic Maintenance at reasonable cost in Delhi.

[justcatering]

Logger pro software

LOGGER PRO SOFTWARE FULL

LOGGER PRO SOFTWARE SOFTWARE

LOGGER PRO SOFTWARE PC

LOGGER PRO SOFTWARE DOWNLOAD

Time of day and date stamps for graphingīUNDLE WITH A LABNAVIGATOR 2 FOR THE ULTIMATE ANALYTICAL SOLUTION FOR THE LAB AND THE FIELD.

Calculated columns allow you to graph new quantities.

Play back movies synced to sensor data.

LOGGER PRO SOFTWARE FULL

For full details, visit our Logger Pro 3 product page. This version is only available for APUS students.

LOGGER PRO SOFTWARE SOFTWARE

Capture videos from DV cameras and web cameras. Logger Pro 3 is award-winning, data-collection and analysis software for Windows and Mac computers.

Extract data from movies using frame-by-frame video analysis.

Model data with user-adjustable functions.

XY graphs, log graphs, double-Y graphs, strip charts, and FFT graphs.

Read values and slope from graphs using examine and tangent line tools.

Import data from Synaptic interfaces.Lay out graphs, tables, and text as needed across multiple pages to describe your test.

Manually enter data for graphing and analysis.

Use a variety of data-collection modes, as needed, for your test: time-based data, selected events, events with typed-in entries, photogate, radiation counting, and more.

Auto-ID sensors make setup effortless.Collect live data from more than 40 different sensors and devices.

Enter values manually from existing data tables or import data. Logger Pro is our flagship data-collection and analysis application for Windows and Mac computers.

Collect data from a variety of sources, including LabNavigator 2, LabNavigator Mini, spectrometers, Ohaus balances, ProScope HR, and more.

Analyze a video frame by frame or take measurements from a still photo.

After the file has downloaded to your computer, double-click the file, and enter.

LOGGER PRO SOFTWARE DOWNLOAD

Capture videos to add a visual record of an test synchronized with your data. Here are links to download the software from Vernier Software & Technology.Draw predictions on graphs prior to data collection.Perform statistical analysis of data, including integrals, tangents, curve fits (pre-defined, custom, and weighted), and more.Connects over 40 Synaptic sensors up to 8 at a time for real-time graphing and analysis.Tailored for everyone from novice users needing simple to use wireless or wired analytical solutions for tough problems up to the most advanced lab, Logger Pro 3 is a tool that fits your needs. This includes research labs, industrial users, corporate trainers, environmental monitoring groups, and many others such as early stage tech startups. provides our application expertise, warranties and the regulatory and liability coverage etc., for any application outside of the educational environment. Under the Synaptic/Forston brands, we are honored to be Vernier’s preferred provider for commercial purposes. Their easy to use versatile software, instruments and sensors for analytical work are leading edge, cost effective and equivalent or better than any you can find from any source. You may know that our long time friends at Vernier Software & Technology are one of the top suppliers of educational tools for the sciences. YOU’VE PROBABLY SEEN AND/OR USED IT BEFORE BUT NOW YOU CAN HAVE IT IN YOUR LAB OR WITH YOU IN THE FIELD:

LOGGER PRO SOFTWARE PC

Similar to Labscribe but different because not as hard or comprehensive as labscribe.LOGGER PRO 3 PC & MAC DATA COLLECTION AND ANALYSIS SOFTWARE The software in conjunction with vernier probes and other lab tools can be used on the students, by the students to make the learning process more active and engage group effort on projects. It allows teachers and students to work faster, accomplish more, and avoid external sources of error that will slow down the learning experiment.Ĭommunity applications: (many, some, none) Teachers AND students can use LoggerPro to document and record lab results and activities, for data analysis, creating graphs and storage of information The program is clearly designed for educational purposes but can be exceptionally useful. Classes can use it to document and graph lab data so that it can be analyzed. Logger Pro is a fantastic tool for data collection and analysis. This Technology provides a way to graph or chart data. The Logger Pro software package is for use with the LabPro or a ULI, a Universal Lab Interface. Visit their web site to learn more about the availability of this software package: Logger Pro software from Vernier Software and Technology. Logger Pro is a software package which is available from Vernier Software and Technology for $65.00. Pretty much used as part of the learning process for labs and etc. (What does this do and why might a teacher care?)

[tppiner]

Logger pro software

#Logger pro software mac os#

#Logger pro software install#

#Logger pro software serial#

#Logger pro software drivers#

#Logger pro software update#

Faster systems willĮxhibit fewer such problems. A minimal system may sometimes exhibit skipped or duplicated frames in video capture.

#Logger pro software drivers#

Compatible camera with updated drivers for your target computer.

Screen resolution of at least 1024x768.

Routine video capture and storage will require additional disk space over time.

For Mac: 867 MHz G4 processor and 1 GB RAM, and at least 500 MB available hard disk space for.

For Windows: 2 GHz single-core processor or any multi-core processor and 1GB RAM, and at least 500 MBĪvailable hard disk space for temporary storage.

OS X 10.4.8 or newer is required for Proscope HR use on Intel Macs.

Windows XP, Vista, or Windows 7 with DirectX 9 and OS compatible drivers installed.

#Logger pro software mac os#

Windows 95 and Mac OS 8 are supported by Logger Pro 2.2.1.

Windows NT is supported by earlier versions of Logger Pro 3.

Mac OS 9 is supported by Logger Pro 3.4.2 OS X 10.2 is supported by Logger Pro 3.4.5 OS X 10.3 is.

Windows 98 SE & Me are supported by Logger Pro 3.4.6.

Window 2000 is supported by Logger Pro 3.6.0.

Video resolutions less than 1024x768 are fully supported by Logger Pro 3.4.6 for non-video applications.

Previous releases of Logger Pro are available for special applications.

Data collection requires one or more of the following interfaces: LabQuest Mini, LabQuest2, LabQuest, LabPro, Go! Temp, Go! Link, Go! Motion, WDSS, Vernier Spectrometers, select Ocean Optics Spectrometers, select Garmin GPS receivers, Vernier GPS, Mini GC, Watts Up? Pro, Ohaus Scout Pro or Adventurer Pro balance.

QuickTime 7 is required for video playback.

For video playback or extended data collection a faster processor and more memory are suggested, such as a 2 GHz (867Mhz G4 for Mac) processor with 2 GB RAM.

Lower resolutions may result in important controls being hidden

Computer display resolution 1024x768 or higher is strongly recommended.

Video playback requires QuickTime ­ another 410 MB should be reserved prior to a Windows installation. About 150 MB additional temporary disk space is needed during the installation process you should have at least 830 MB free space prior to installation to allow the installation to complete successfully and retain some space for user files.

Logger Pro requires approximately 380 MB.

#Logger pro software update#

We recommend that Mac users use 10.5.8 or better and upgrade their systems through Apple's software update on a regular basis for the optimal experience in using Logger Pro.

Macintosh (PPC & Intel) OS X 10.4.1, 10.5.3, 10.6, or newer with available USB port.

Apple's QuickTime version 7.1.6 or newer required for video playback. Windows Vista or Windows 7 (32 or 64 bit) with OS compatible hardware.

#Logger pro software serial#

Windows XP SP2/SP3 (32 bit) with Pentium processor, 500 MHz or better, 256 MB RAM, available USB or serial port.

#Logger pro software install#

System Requirements Install Notes What's Changed in Logger Pro 3.8.5 Logger Pro 3.8.5 Known Issues File Compatibility What Changed in Earlier Logger Pro 3 Releases What Changed from Logger Pro 2 to Logger Pro 3 LabPro Operating System Changes LabQuest Operating System Changesīasic data collection or graphing, with no video capture Helps WooCommerce by creating an unique code for each customer so that it knows where to find the cart data in the database for each customer.File Info : application/pdf, 32 Pages, 214.93KB Document Document LoggerPro385ReleaseNotes Logger Pro 3 Release Notes Helps WooCommerce determine when cart contents/data changes. Used to store API results for better performance Used to track consent and privacy settings related to HubSpot. Used to measure the effectiveness of our marketing ads and campaigns. Used to throttle request rate of Google Analytics Used to distinguish users for Google Analytics Used to track clicks and submissions that come through Facebook and Facebook ads. Used to remember if user viewed the cookie policy Used to preserve cookie consent answer for non-necessary cookies Used to preserve cookie consent answer for necessary cookies Used by CloudFlare service for rate limiting But opting out of some of these cookies may have an effect on your browsing experience. You also have the option to opt-out of these cookies. These cookies will be stored in your browser only with your consent. We also use third-party cookies that help us analyze and understand how you use this website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. This website uses cookies to improve your experience while you navigate through the website.

[okw-gehaeuse]

Die Industrie 4.0 benötigt Gehäuse für smarte Sensoranwendungen

Die vierte industrielle Revolution, oder abgekürzt „Industrie 4.0“, hat schon längst begonnen. Auch wenn vielen das noch gar nicht so bewusst ist. Das liegt zum einen daran, dass die meisten schon einmal davon gehört haben, jedoch tun sich viele mit der Begriffserklärung und deren reale Auswirkungen auf das tägliche Arbeitsleben noch recht schwer. Darüber hinaus werden in gleichem Atemzug zur Industrie 4.0 die Trendthemen IoT (Internet of Things) und IIoT (Industrial Internet of Things) genannt. Das macht´s noch ein bisschen komplexer.

IoT im Hausgebrauch

Im privaten Umfeld ist die Digitalisierung und Vernetzung am besten greif- und begreifbar: mit dem Smartphone, mittlerweile der „beste Freund des Menschen“, kann man schon heute die vielfältigsten Dinge regeln und steuern, egal wo man sich gerade befindet. Einzelne Geräte, wie z.B. die Smart-Watch, werden mit weiteren „smarten Dingen“ vernetzt und die Datenspeicherung erfolgt zentralisiert in der gesicherten „Cloud“. Das alles soll uns im Alltag das Leben erleichtern. Vieles macht meiner Meinung nach absolut Sinn, z.B. am Körper tragbare Notrufsysteme/-Sender in Kliniken oder Sozialbereichen. Oder auch Personen-Ortungssysteme, bei Berufen mit erhöhtem Sicherheitsrisiko. Ein interessantes Beispiel ist das „Capturs“ des gleichnamigen, französischen Herstellers (www.capturs.com). Dieses GPS-Tracking-System mag auf den ersten Blick eher den Fun-Charakter bedienen, offenbart jedoch bei näherem Blick wesentlich mehr: das Wearable-Gerät ermöglicht es, Freunden, der Familie und Fans Routen zu verfolgen und somit live dabei zu sein, wenn Personen ihre Sporttätigkeit ausführen; unabhängig vom jeweiligen Endgerät. Man kann die Daten (Route, Distanz, Höhe, Dauer) exportieren/speichern und sogar in sozialen Netzwerken veröffentlichen. Nun die Besonderheit: bei Stürzen oder Unfällen, verlassen der vordefinierten Route, längeres verweilen an einem Standort und bei schwacher Batterie sendet es automatisch eine Nachricht per E-Mail oder eine SMS an bestimmte Personen. Damit kann im Ernstfall schnell Hilfe angefordert werden. Das Capturs wurde in der OKW-Gehäusereihe MINITEC verbaut und kann für alle Outdoor-Aktivitäten verwendet werden: Wandern, Skifahren, Klettern, Gleitschirmfliegen usw. Weitere für Wearables nutzbare OKW-Gehäusereihen sind das BODY-CASE und das ERGO-CASE.

Industrie 4.0 und IIoT

Doch kommen wir nun wieder zum eigentlichen Thema „Industrie 4.0“ und IIoT „Industrial Internet of Things“ zurück. Es gibt zwischen beiden Begrifflichkeiten einen wesentlichen Unterschied – Industrie 4.0 ist kurz gesagt eine Hightech-Strategie, um die Digitalisierung in der industriellen Produktion voran zu treiben; IIoT ist der konkrete Gebrauch smarter Technologien in der Fertigungsindustrie. Sehr viele Unternehmen beschäftigen sich zurzeit mit der Frage, wie sie die internen Prozesse und über verschiedene Ebenen/Organisationen hinweg transparent gestalten und optimieren können. Im Grunde geht es auch beim IIoT darum, Dinge smarter zu machen, indem sie miteinander kommunizieren. Im Mittelpunkt stehen dabei Sensoren, welche eingebettet in die Geräte, ständig Daten über Maschinen, spezielle Anwendungsszenarien oder über Anwender und die gesamte Wertschöpfungskette sammeln und zentral abliefern. Die wesentlichen Ziele sind dabei immer gleich: eine bessere Qualität liefern, die Prozesse optimieren und verschlanken, den Einsatz von Ressourcen optimieren, die Aufträge schneller fertig stellen und den Kunden ausliefern. Ein wichtiges Ziel darüber hinaus ist es den Markteinführungs-Zyklus neuer Produkte wesentlich zu verkürzen, um gegenüber dem Wettbewerb Vorteile zu erhalten.

Gehäuse und IIoT

Es werden bereits heute viele OKW-Gehäusereihen für die unterschiedlichsten Anwendungszwecke in der Smart-Factory genutzt. Die Nutzung im späteren Arbeitsalltag ist hierbei vielfältig und somit können die Vorgaben an das Gehäuse recht unterschiedlich sein:

Mobile Gehäuse zur Integration von Temperatur-, Feuchtigkeits- oder Präsenzsensoren – ergonomisches Design für ein ermüdungsfreies Arbeiten.

Als Gateways fest an der Wand verbaut – einfache, verdeckte Wandbefestigung, eventuell mit Sicherungsfunktionen

An Maschinen/Anlagen mit integrierten Vibrations-/Druck- und Zustandssensoren.

In Mini-Formaten für Wearable-Applikationen – am Arm, Handgelenk, um den Hals oder in der Hemd-/Hosentasche

Größere Ausführungen in einer robusten Konstruktion – bei mehr Platzbedarf bzgl. den Einbauten/Displays.

Verwendung hochwertiger Materialien bei der Herstellung der Standardgehäuse

Hohe Dichtigkeitsklassen zum Schutz der integrierten Elektronikbauteile und Sensoren.

Möglichkeiten zur Modifikation der Standardprodukte gemäß individuellen Kundenvorstellung und Bedarfen.

Ich habe nachfolgend mal einige interessante Beispiele von Kundenapplikationen aus dem Bereich IIoT für Sie herausgepickt:

Funk-Datenlogger

Mit dem Wireless Data Logger Almemo 470 von Ahlborn Mess- und Regelungstechnik, können Klimamessgrößen wie Temperatur oder Luftfeuchtigkeit drahtlos erfasst werden. Eine flexible Anschlusstechnik für digitale Sensoren ermöglicht die Adaption einer Vielzahl unterschiedlicher Sensoren zur Messung verschiedener Messgrößen.

Applikation Funk-Datenlogger

Funknetzwerk Access Point

Auf der Feldebene ermöglicht das sWave.NET-Funknetzwerk von steute Schaltgeräte GmbH & Co. KG, die variable Kommunikation zwischen Funkschaltgeräten und Access Points, die ähnlich wie ein Router arbeiten. Sie empfangen die Signale der Funkschaltgeräte, bündeln und senden sie, z.B. per Ethernet oder WiFi an einen oder mehrere Applikationsserver. Die Access Points werden verteilt im Sendebereich installiert und kommunizieren mit den Funkschaltgeräten.

Applikation Funknetzwerk Access Point

Smart TAG

Der conbee Smart TAG basiert auf der Bluetooth-4.x-Spezifikation- mit einer Reichweite von bis zu 150 m. Der voll konfigurierbare TAG verfügt über eine Authentifizierungs-Funktion via Out-Of-Band- oder SecureSimple-Pairing, ist fälschungssicher und hat einen Bewegungssensor, der in der Lage ist, Manipulationsversuche zu erkennen. Dabei werden in dynamisch anpassbaren Sendeintervallen Statusdaten in Advertisement-Paketen übermittelt, welche Auskunft über das zu trackende Objekt geben. Der intelligente TAG meldet zyklisch seine ldentifikationsnummer, Temperatur- und Bewegungsdaten sowie Batteriestatus und optional Position.

Applikation SMART TAG

Robuster UHF Reader

Die RF-Embedded GmbH hat einen RFID-Reader für den passiven ultrahochfrequenten Funkbereich (UHF) entwickelt, welcher ein Energiefeld aus elektromagnetische Wellen erzeugt. Sobald ein passiver UHF-Transponder in das Energiefeld gelangt, sendet er seinen Speicherinhalt an den entsprechenden RFID Reader.

Applikation Robuster UHF Reader

Alle Gehäuse, welche zur Nutzung von smarten Sensoren geeignet sind, haben wir nun in einer eigenen Rubrik zusammengefasst. Somit können Sie nun noch schneller Ihr passendes Sensorgehäuse finden.

Übersicht IIoT-/ Sensorgehäuse

Damit die Standardgehäuse auch den individuellen Kundenansprüchen bzgl. der Firmenfarbe, optischen Anpassung an die Nutzungsumgebung, Unternehmenslogo, den Elektronikeinbauten und Zuleitungen etc. entsprechen, bieten wir vielfältige Serviceleistungen an: Lackierungen, Bedruckungen, EMV-Aluminiumbedampfung zum Schutz vor Störstahlen, Aussparungen/ Durchbrüchen für z.B. USB-/SPI-/I2C-/LAN-Stecker oder Bedientasten.

Bei Industriegehäusen mit hoher Schutzart ist darüber hinaus die Verwendung spezieller Druckausgleichselemente ein großes Plus. Durch einen Wechsel der Temperaturen kann bei abgedichteten Gehäusen ein Unterdruck im Inneren entstehen. Feuchtigkeit und Schmutzpartikel können angesaugt werden und die empfindliche Elektronik beschädigen. Die OKW-Druckausgleichselemente können hier dagegen wirken, da sie einen besonders hohen Luftdurchsatz ermöglichen. Gleichzeitig schützt die innovative Bauweise zuverlässig vor Schmutz und ist bei Bedarf bis zu einem Druck von 6 bar absolut wasserdicht.

[mikrometry]

Eddy Current Digital Coating Thickness Gauge ETG15FN

https://www.mikrometry.com/products/etg15fn-eddy-current-digital-coating-thickness-gau.html

Mikrometry digital coating thickness meter gauge ETG15FN is an economical choice that provides high quality measurement of the paint thickness of car. ETG15FN is a dual-purpose elecoat coating thickness gauge with integrated design of sensor and host. It adopts the principle of magnetic method and eddy current method for measurement.

 This gauge for measuring thickness can automatically identify ferrous and non-ferrous substrates. It can be used for non-destructive measurement of non-magnetic metal substrates or the thickness of the non-conductive coating layer on the non-magnetic substrate, this instrument is suitable for non-destructive with fast and precise measurement.

 Compared with magnetic coating thickness gauge, the curent digital coating thickness meter gauge is suitable for non-conductive layer thickness measurement on conductive metals.

 Features Of ETG15FN Eddy Current Digital Coating Thickness Gauge

· Very compact size with integrated probe.

· Magnetic induction method & Eddy Current (ISO 2178, ISO2160, ASTM D7091), Measure of the thickness of non ferromagnetic coating on ferromagnetic substrate and non-conductive coating on non-magnetic metal collective.

· Quick one-hand operation. Place instrument on specimen and see the measured value.

· Ready to measure immediately without calibration.

· Easy to perform zero-point correction provides correct measurement results for measuring applications with little changes in shape and substrate material.

· The one-point calibration function allows for an adaptation in cases of severe changes in shape or substrate material and enables high-precision measurements in selected measurement ranges.

· Data transmitting to PC via USB cable.

· Statistic function allows for evaluation of a measurement series and display of the most significant characteristic statistical values.

· Auto power off.

· Wireless mini-printer.

 Specifications Of ETG15FN Eddy Current Digital Coating Thickness Gauge

 Test Method

Magnetic induction & Eddy current

Measuring Range

0-1500um(0-60mil)

Resolution

0-999um:0.1um ≥1000um:1um

Accuracy

0-100um:±1.5um 101-1500um:≤1.5%

Data Memory

1500 readings

Interface

USB data transmission (with PCB software)

Display

Dot matrix LCD screen with backlight (128X64)

Operating Temperature

0-50℃

Power Supply

1.5V*3 (AAA alkaline batteries)

Dimension

88*67*30 mm

Weight

120 g

Matrix

Iron matrix, aluminum matrix

 Standard content of shipment

 Thickness gauge, Substrate plate, Certification foils set, 3 AAA alkaline batteries, Data cable, Data logger software, Leather sheath, User's manual, Manufacturer's certificate.

 Other Coating Metal Thickness Gauge

[vegabazaar]

Testo 174H Mini Data Logger Temperature And Humidity

Model : 174H

Accuracy : �0.9 �F (-4� To 158 �F) / �0.5 �C (-20 To +70 �C)

Temperature Range : -4� To 158 �F / -20 To +70 �

CHumidity Range : 0 To 100 %RH

Warranty : 1 Years

Get direct : https://vegabazaar.com

WhatsAPP: https://wa.me/message/42KX3DF6XOQAF1

#testo #transport #warehouse #transportation #logistics #delivery

[foxdoctors309]

Maker Cardarduino

Arduino Code Maker

Online Arduino Schematic Maker

Create Arduino

Just a quick walk through how to use the SD card module with Arduino. It is the same for Micro SD card modules. The Arduino official site provide a library for this purpose, and I will describe how I used this library and explain what each function does.

The SD card module communicates with the Arduino over the serial peripheral interface (SPI) communication protocol. It can be simply connected to the Arduino’s hardware SPI pins. LCD with I2C Module to the Arduino As the name implies, the LCD module communicates with Arduino through I2C communication. After a week of research, brainstorming and studying we ended up making, the SD-CARD (social distancing icard). The SD-CARD consists of an Arduino Nano which is connected with a buzzer, an ultrasonic sensor and 2 LEDs. The ultrasonic sensor calculates the distance between the person wearing it and people near him/her.

Buy the Arduino from: Banggood | Amazon

Buy SD Card Module from: Amazon | Banggood

I have not tested this library with all the SD card modules, but I think it should work for majority of them, unless you are told by the seller that you should use a different library.

The Library uses standard SPI interface for communication, which hasSPI buses, MISO, MOSI, SCK (CLK) and a chip select signal pin, CS.

(pic)

** MOSI – pin 11 ** MISO – pin 12 ** SCK (CLK) – pin 13 ** CS – pin 4

The default Arduino library for SD card is huge! With the example read/write sketch, when compiled it’s 13690 Bytes which is half of the available flash space on an Arduino pro mini!

So if you are tight in sketch space, it’s a good idea to find a smaller library. Depends on the SD cards you have and the format you want to use, you have these options.

FAT32 Format (larger than 2GB)

Adafruit SD (almost the same as Arduino SD, except a few optimization on SRAM memory)

FAT16 Format (smaller than 2GB)

I haven’t tested all of these libraries, so do your research and test them before using it. Here I will show you how to use the Arduino SD library.

The SD library comes with the Arduino IDE, so you don’t need to download it. It needs to be include at the beginning of the sketch.

Including `SD.h` automatically creates a global “SD” object which can be interacted within a similar manner to other standard global objects like “Serial”.

Read from SD card

First you need top open the file first.

It will return false if it fails to open the file, so check dataFile before using it. The “read” function reads the file line by line, so you will have to use a while loop, until it fail to reach the end of the file. Now you can write to the file using this.

Note that you need to close the file after finished reading it. Also, you can only open one file at a time, if you want to read the next file, you need to close the current file first.

Write to SD card

First you need to open the file you want to write to with “FILE_WRITE” parameter.

The “open” function takes two parameters, file location and mode (only required for “Write”, if missing by default it opens the file in Read-Only mode). It will return false if it fails to open the file, so check dataFile before using it. Now you can write to the file using this.

Note that you need to close the file after writing to it. Also, you can only open one file at a time, if you want to open the next file, you need to close the current file first.

Check if a File Exists

Create a Text File on SD Card

There isn’t a function for this purposes, but you can open a file with “FILE_WRITE” mode to create a file, if this file doesn’t exist.

Delete a File on SD card

List All the files on SD card

There isn’t a function for this in the library, but we can create a custom function to achieve this purpose. This function is from the example sketch in the Library. It prints the file directory to serial monitor.

Testing SD card or Get SD Card Information

Track ME is a 'small' GPS, SD Card, and GSM Shield controlled by an Arduino Mega.Call me and get my location.

Track ME

Arduino Code Maker

Project tutorial by Hugo Gomes

57,633 views

32 comments

94 respects

In this tutorial, you’ll learn how to use SD and micro SD cards with Arduino in a simple project to measure the environment temperature.

SD Card Module with Arduino: How to Read/Write Data

by ElectroPeak

104,338 views

12 comments

24 respects

This project describes of a low-cost GPS data logger for RC planes. In a previous project I described how to build a GPS data logger.

RC LOGGERSTATION - GPS Data Logger for RC Plane

Project tutorial by yvesmorele

5,044 views

2 comments

14 respects

Make your kid's battery-operated electric bike more fun with Arduino!

Electric Bike

Project tutorial by ifeghali

4,665 views

2 comments

13 respects

An Arduino based MP3 player with 30 levels of volume adjustment, 5 levels of EQ adjustment, and a pretty cool retro looking UI.

Arduino Retro Style MP3 Player!

Project tutorial by Neutrino

11,344 views

0 comments

23 respects

This project will play sound from Arduino and work the same as Google Assistant with limited commands. voice-controlled automation.

Talkative Automation || Audio from Arduino || HC-05 || Voice

Project tutorial by Vishalsoniindia

5,831 views

0 comments

9 respects

A small device that can be placed in a car's console to serve various functions such as temperature, time, date, etc.

Car Console Computer

Project showcase by Bie

4,761 views

0 comments

5 respects

Doorbell plays sound from microSD card and Arduino.

SD Card Doorbell

Project tutorial by Projecter

4,429 views

0 comments

10 respects

Connect Ultrasonic Ranger and MicroSD to Arduino, and program it to record the distance - Quick and Easy!

Measure Distance With Sonic Ranger And Record It On MicroSD

Project tutorial by Boian Mitov

4,263 views

0 comments

21 respects

Aim of this project is to improve the experience of the visually challenged, while making cashless transactions in public.

Online Arduino Schematic Maker

Payment Terminal for the Visually Challenged

Project tutorial by Paarth Arkadi

3,636 views

1 comment

8 respects

This project uses a micro SD card to store a text file and print it out to a 16x2 liquid crystal display.

Reading Text Files From an SD Card (Arduino)

Project tutorial by millerman4487

2,815 views

1 comment

4 respects

This is an Arduino base, preset keyboard emulation (HID-human interface device), with SD card file reader and AES 128 encryption.

Create Arduino

Arduino Programmed Keyboard Strikes

Project in progress by Sam

2,295 views

0 comments

1 respect

Retrieve data from speed and cadence sensor in a bike trainer. Display info in LCD screen and log in a SD Card

Bike trainer logger

by cimanes

913 views

0 comments

1 respect

[vackerstore]

Msr Data Logger - Small Data Loggers That Deliver Big Results

MSR data logger is designed to measure and record various parameters, such as temperature, humidity, pressure, and light intensity, among others. These devices are small and compact, which makes them ideal for use in tight spaces or hard-to-reach locations. They are equipped with sensors that can detect changes in the environment and record them at predetermined intervals. The recorded data can then be downloaded and analysed to gain valuable insights into system performance, energy efficiency, and other important metrics. https://store.vackerglobal.com/shop/product/1000000110-temperature-and-humidity-mini-data-logger-msr145b15h-3972?category=1002&search=1000000110#attr=