#Screw Driver Set Price

[tataagrico1]

From Fixing to Crafting | Creative Applications of Screwdriver Sets

Can screwdrivers be used for DIY projects? Or can you only use it to fix or tighten screws? Learn the answer here.

Visit at: https://www.tataagrico.com/blog-post/from-fixing-to-crafting-creative-applications-of-screwdriver-sets/

[hpalloy]

Diving into the world of DIY with Screwdriver Bit Sets!

Upgrade your DIY game with a versatile screwdriver bit sets! 🔩💡 Whether you're a seasoned handyman or a weekend warrior, having the right tools makes all the difference. 🛠️💪

Investing in a high-quality screwdriver bit sets is like giving your toolkit a power boost. With a variety of bits for different screw types and sizes, you'll tackle any project with ease. From flatheads to Phillips, Torx to hex – these sets have you covered. 🔧🔨

No more fumbling around for the right bit! A comprehensive screwdriver bit sets ensures you're prepared for any screw that comes your way. It's the secret weapon for assembling furniture, fixing electronics, or tackling that overdue home improvement project. 🏡✨

Pro tip: Look for sets with magnetic holders for easy bit changes. It's a game-changer when you're working in tight spaces or dealing with tiny screws. Plus, these sets often come in a durable case, keeping everything organized and ready to go. 🧰👌

Upgrade your toolkit, upgrade your results. Invest in a top-notch screwdriver bit sets, and watch your DIY projects level up!

[a-spoonful-o-generosity]

Goodwill find- Ertl 1/8 Pontiac Firebird (I think) NASCAR

RESTORATION FAILED!

Sometimes no matter how pretty something is you just can't do anything with it.

This car was found in the Goodwill toy section under a protective display case that barely fit the base it was attached to, but it kept the body from being scratched. I thought it was a treasure at a bargain price of under $10USD. But I discovered the rear driver side wheel was broken.

The chassis was attached to the base with an insidious set of screws that the grooves were angled so they could only be tightened. It took hours to chip away at the plastic around the screws to free it.

I decided to take off the wheels and use them on another custom. I broke the wheels off in the process, ffffffffffff... Then I could not get the original wheels off of the car I had wanted to customize. Fortunately I stopped before breaking my Ertl 66 GTO wheels.

So then I glued the wheels back onto this car. But that LUNA DAMNED driver side wheel will not stay on no matter what I do.

So I'm scrapping it.

Lots of time and energy wasted.

I don't even like NASCAR after the 80s. They all look the same. I just thought this was pretty and might make a good Hearth's Warming/Christmas/Holiday decoration because of the deer on the hood.

Side note- the body of this replica is sturdy diecast metal, while real NASCARs are all stamped fiberglass shells of their former production car selves.

Just goes to show, sometimes

@identifying-cars-in-posts this thing had no make and model information on the bottom.

[the-night-writer1]

The cutest kick to the knee

When Red son finds himself in a tool store he runs into a three year old who kicks him in the knee. (The uncle monkie kid au timeline a)

It was a Tuesday afternoon as Red son found himself looking for a replacement wrench. Thus he was looking over the selection his preferred store had. He didn't want just any wrench it had to be sturdy, heaven forbid it snap like his old one had this morning.

Mother was fuming that he needed a new wrench which delayed father's release by a few hours. She relented when Red son asked if his own well being was worth father's release. She didn't want Red son to lose his arm. A few loose bolts was all it would take.

Now he was debating which of these wrenches were worth the price. Though mother wouldn't care ,he did. The tool should last as long as his last wrench had. It lasted at least thirty years given all it had to endure.

He was holding a particular brand of wrench when he heard feet behind him. He stepped to the side not paying much attention as he was reading the description on the casing. The demon probably should have been playing attention.

"Heys" the lil tot said as he tried to grab the big red head's attention. He needed the wrench the man was holding for his baba. He saved all his money to get it because Uncle Mk broke baba's other wrench. Baba was looking at the screw drivers so it was the perfect time to surprise him with a new wrench!

"heys!" He repeated yet the man wasn't listening to him. He needed that wrench! It was the last one of baba's brand. Why was this guy not listening?!

Red son didn't realize someone was trying to talk to him until he got a very sharp kick to his knee. Which caused him to yell out of shock and pain as he dropped to the floor. The wrench he had been holding hit the floor and he saw little hands hands grabbed it. A little boy was taking a wrench from him what the hell?

Adorable little tot with deep red hair and golden hazel eyes started booking it away from him. Red quickly got up and gave chase after the toddler. He shouldn't be taking things from adults. The little guy was fast thanks to that knee kick.

"Mengyao? Why are you running bubba?" A Carmel brunette asked as Red caught up to the boy. They picked up the tot and looked over to see Red then looked back at their son," What did you do?"

"he kicked me in the knee and took the wrench I was looking at" Red son said in a calm manner. He wasn't going to hell at the parent trying to figure out the situation.

"Mengyao we've talked about this you can't hurt people to get something you want! I don't care what auntie Mei says auntie Mei isn't your baba" the man softly scolded as he took the wrench and handed it back to Red son. Red catching the tinkering scars on the man's hands.

"buts you need a new wrench baba and I tried to ask but he's was ignoring me!" The toddler protested trying to get wrench back.

"I am so sorry sir. He's not super good with words yet." The man apologized as he kept the toddler on his hip," Mengyao apologize to this man for kicking him in the knee"

"but you needs the wrench baba!" The toddler said with a huff.

"I can order a new wrench sweetheart. He may need it more than I do and you were very mean kicking him" the man said as the toddler started to tear up. Aw he just wanted to help his baba. Red had ignored him unintentionally and red probably would have done the same at his age.

"if it means anything little one I am sorry I didn't hear you" Red said to the little boy who rubs his eyes.

"I sorry I kicked you in the knee. Baba wrench broken" Mengyao said as he started hiccuping and his baba kissed his forehead. It was pretty cute he was so determined to help his baba.

"again I'm sorry sir listen if you want a bowl of some of the best noodles in the city just go to pigsy's noodles and say Shanyao sent you or call me and I'll set it up for you" Shan said as he quickly wrote his number down and ripped it off his grocery list before handing it to Red son," I'm going to get him home it's clearly nap time"

"oh thank you. I hope you're able to get a new wrench" Red son said as he let Shan leave with his adorable little boy. He'd forget the name of the business later that afternoon when he chased the man's brother through the city.

[reliablewindoors]

Why a Door Is More Than a Slab A front door looks like a single panel, yet it works harder than any other component in your building envelope. - Thermal stopper. In most GTA homes the rough opening is 36 in × 80 in—nearly 20 ft² of potential air leakage. Even a 1-mm gap along the sweep can dump 9 % of your heated air every hour. Over one Toronto winter that’s the equivalent of leaving a basement window open for two months straight. A modern R-10 to R-16 core, tight magnetic gaskets, and a composite threshold transform that hole into an insulating wall. - Structural hinge-point. A door slab weighs 60–140 lb; the hinge-side jamb carries that load while absorbing every slam, wind-gust pull, and shoulder push. Rotten or under-sized framing lets the jamb twist, widening the latch gap, which fuels drafts and becomes a burglar’s pry point. A proper door replacement includes a steel-reinforced jamb and 3-inch screws driven into the house’s framing studs—small hardware that multiplies security. - Moisture gatekeeper. Doors sit at the slab or sill where rain splash-back, ice melt, and driveway salt accumulate. Outdated pine thresholds wick water inside walls, breeding mould and staining flooring. Upgrading to a composite, rot-proof sill with a thermal break stops capillary action cold. - Sound shield. A polyurethane-filled fiberglass slab raises the STC rating by up to 6 dB versus hollow-core steel, cutting street noise almost in half. Quieter foyers mean higher resale—Toronto REALTORS® cite noise reduction among the top three value bumps after a high-performance door swap. - Rebate magnet. Energy Star Zone 3 doors now qualify for a $250 Greener Homes Grant and a $100 Enbridge HER+ top-up. Factor in a 12 % HVAC-usage drop, and many buyers recover the net cost of professional door replacement in 24–30 months. Reliable Windows & Doors installs these energy-efficient doors across the GTA and answers 96 % of service calls within one business day—crucial when a warped slab means soaring utility bills or a fatigued lock leaves your home exposed. One visit turns the largest hole in your thermal envelope into a secure, silent, money-saving asset. Technician installing exterior door New front door from Reliable Five Cost Drivers You Must Know Cost DriverLow EndHigh EndWhy It MattersMaterialSteel skinFiberglass + foamEPS vs poly-iso R-valueCore R-valueR-6R-16Direct utility savingsGlass LiteNoneLow-E tripleAdds light—adds priceLock HardwareSingle deadboltMultipoint smartInsurance discountsLabour TierRetrofitFull frameRetrofit uses existing jamb Ignoring these factors skews any exterior door cost quote you find online. GTA 2025 Price Benchmarks Door SpecParts (CAD)LabourTotalSteel R-6 basic$790$350$1 140Fiberglass R-10, ¾-lite$1 280$380$1 660Fiberglass R-16, SDL, smart lock$1 980$420$2 400Double French, Low-E, multipoint$2 850$650$3 500 Rule of thumb: Add 15 % for brick removal; subtract $150 when bundling with window orders via Reliable’s Glass & Doors page. DIY vs Pro: Counting True Costs The YouTube Myth: “Just shim, screw, and add a little foam.”The Reality: - Bowed jambs. One extra shim on the hinge side can torque the frame 4 mm out of plumb. That twist forces the strike plate to ride high, so you slam harder; within a year the slab drags, the seal tears, and your “cheap” project whistles cold air. - Ripped weather-strip. DIY installers often squeeze foam too soon. Expanding foam bows jamb legs, tearing the magnetic gasket. A $12 strip seems minor until you’re heating the neighbourhood all winter. - Lock-set mis-align. A millimetre off at the latch becomes a 6 mm pry gap at the deadbolt. Insurance adjusters know it; burglars love it. Kick-ins spike whenever residents attempt “weekend” door replacement without a jig. What licensed residential door services crews do instead: - Laser-plumb jamb alignment—green-beam levels show ±1 mm tolerance before a single screw sinks. - Multi-point latch torque log—digital wrench records 35 in-lb on each bolt for even pull; you get the PDF for resale proof. - CSA & ENERGY STAR model codes—techs snap a photo of the sticker and file it with your Greener Homes form. Miss that tag and you kiss $350 in rebates goodbye. Dollar math: ScenarioUp-front Labour12-Month Follow-UpsNet Year-1 CostWeekend DIY$0Weather-strip $40 + slab plane $180 + higher heat $120$340Pro install (Reliable)$350$0 (labour warrantied)$350 Spend $10 more on Day 1, skip $340 in chronic fixes, keep your warranty intact, and lock in rebates that only certified entry door installation pros can validate. That’s why “Just shim & screw” usually snowballs into the most expensive “savings” you’ll ever make on a front door. Nine Proven Fixes (and Hazards They Prevent) - Composite threshold → ends rot vs pine. - Poly-iso foam core → R-16, saves $90/yr. - Thermal break sill → stops frost line. - Warm-edge lite spacer → kills edge condensation. - Multipoint lock → 5 % insurance discount. - PVC jamb cladding → zero scrape-&-paint. - High-elastic caulk → flexes at –30 °C. - Backer-rod pre-caulk → fills 10 mm gaps. - Digital torque report → resale proof. Skip three and “budget” door replacement morphs into repeated call-backs. Rebate & Finance Stack - Greener Homes Grant — $250 for Energy-Star Zone 3 door. - Enbridge HER+ — $100 top-up for R ≥ 10. - 0 % six-month promo — Reliable fronts the parts; you pay after tax refund. Stack both rebates and a $1 660 fiberglass door nets $1 310 out of pocket in Year 1—before energy savings. Case Study — Scarborough Split-Level Gets a High-Performance Door BackgroundRavi and Priya own a 1978 split-level near Birchmount & Lawrence. Their original steel door had warped so badly that daylight showed through a 4 mm gap at the sweep. Winter drafts made the foyer the coldest place in the house, and the single deadbolt rattled if anyone leaned on the slab. The Upgrade - Door replacement: R-16 polyurethane-filled fiberglass slab, factory-painted “Chestnut Brown.” - Glazing: ¾-lite Low-E argon unit with warm-edge spacer. - Hardware: Three-point multipoint lock, satin-nickel lever set, smart deadbolt sensor. - Trim package: PVC jamb cladding + composite threshold with thermal break. Cost Breakdown Line-itemPartsLabourTotalFiberglass slab + lite$1 480——Multipoint lockset$240——PVC jamb cladding$120——Professional labour—$380—Subtotal——$2 220Greener Homes rebate——–$250Net cost——$1 970 (Taxes omitted for clarity.) Measured Results (First 12 Months) MetricBeforeAfterDeltaAir-leakage @ 50 Pa (ACH)4.83.9–19 %Gas usage (m³ / yr)3 1002 575–17 %Insurance premium$1 120$1 064–5 %Appraised value*$846 000$860 000+$14 000 * Appraisal by GTA Homes Inc., six months post-install. Payback Math - Energy savings: $138 / yr (Enbridge rate × 525 m³ saved). - Insurance drop: $56 / yr. - Total annual benefit: $194. - Net cost after rebate: $1 970. Payback = 1 970 ÷ 194 ≈ 10.2 quarters → Month 26. At just over two years, Ravi and Priya broke even; every winter afterward delivers pure savings. Meanwhile, the foyer now holds steady at 20 °C even on –12 °C evenings, and the smart lock texts them if the door’s been left ajar—peace of mind no 1970s slab could provide. Take-away: A data-driven entry door installation can yield tangible cash returns, lower insurance risk, and add five figures to resale—proof that “cosmetic” door replacement is, in fact, a high-ROI energy retrofit. Installation Day Timeline ClockCrew TaskHomeowner View7 a.m.Arrival, floor tarpsSnap “before” photo8 a.m.Old slab out, jamb scored10-min draft10 a.m.New jamb set, laser-plumbSmell fresh caulkNoonSlab hung, multipoint torquedHands-on demo1 p.m.Foam inject & trimLunch break2 p.m.Cleanup & torque PDF e-mailAdmire airtight fit Maintenance Matrix SeasonTaskMinutesToolJanuaryLube hinges10Teflon sprayAprilWash sill, inspect caulk15Vinegar + clothJulyTorque lock screws10#2 driverOctoberSeal check dollar-bill test5Dollar bill Miss two seasons and energy-efficient doors lose 15 % R-value. Printable Pre-Winter Door Audit - Feel for cold spots at rails. - Inspect sweep for daylight. - Tap jamb bottom—hollow = rot. - Check lock alignment < 2 mm play. - Spray hose—look for leaks. Fail two? Schedule Reliable’s entry door installation assessment before freeze-up. Energy-Savings Math Door R-valueAnnual HVAC Save10-Year Net vs R-6R-10$55+$300R-16$90+$620R-20$110+$780 Even high-end R-20 offsets extra cost by Year 7—hard numbers that justify premium door replacement. Acoustic & Security Perks—Why a Premium Door Replacement Does More Than Keep Out Drafts 1. Laminated Lite = Urban QuietSwapping a thin dual-pane insert for a laminated Low-E glass lite raises the Sound Transmission Class (STC) rating by an average 6 dB. That’s a perceived halving of traffic noise—crucial if you face the Gardiner or a busy arterial. Clients who bundle laminated glass with our entry door installation package consistently report lower TV volumes and longer baby-nap windows. Tech note: The PVB interlayer in laminated glass dampens low-frequency rumbles (30–125 Hz) better than triple-pane alone. Pair it with a polyurethane-filled slab and you’ll match the acoustic comfort of many condo curtain walls—without paying commercial-grade exterior door cost premiums. 2. Multipoint Lock = Built-in “Steel Frame”Standard single deadbolts focus all kick-in force on one ¾-inch strike plate. A multipoint lock distributes impact across three steel hooks—top, mid, and sill—boosting kick resistance 45 % over the CSA baseline (see CSA test 2024-C-03). Insurers notice: many underwriters shave 3–5 % off premiums when policy photos show an engaged multipoint throw. Bonus security tech: Add a smart sensor module for $45 during installation; app alerts pop if the latch slips or vibration spikes—cheap peace of mind compared to post-break-in glass cleanup. 3. Value Play vs Noise & Theft Costs UpgradeParts Δ (CAD)Annual BenefitPaybackLaminated lite (+STC 6 dB)+$180~$0.00 energy, priceless silence3–4 yrs resale valueMultipoint lock+$95–$40/yr insurance< 3 yrs Spread over the life of a 25-year warranty, these add-ons cost pennies a day—pennies that prevent late-night siren fatigue and lock-break failures. And because Reliable bundles them into one residential door services quote, you still see a single labour line, a single rebate form, and a single warranty certificate—no juggling subcontractors or hidden line items. 4. Energy SynergyThicker laminated glass + tighter multi-hook compression means fewer air exchanges; combine that with an R-16 slab and you unlock true energy-efficient doors status. In blower-door follow-ups, homes that choose both upgrades average 0.2 ACH lower leakage than identical doors without them—worth an extra $20–$25 in annual heating savings. Bottom Line: For a marginal bump in exterior door cost, laminated lites and multipoint locks deliver quieter rooms, stronger security, lower insurance, and better blower-door numbers—an unbeatable quartet for any serious door replacement. xtended FAQ — Everything You Wanted to Know About Door Replacement QAIs tempered-glass mandatory?Yes—Ontario Building Code OBC 9.6.1.5 requires tempered or laminated lites when glass is within 600 mm (24 in) of the floor, stairs, or door handle. Choosing a laminated lite also bumps STC by 6 dB—an acoustic bonus for homes near the Gardiner.Do I pay GST/HST on a rebate?You pay tax only on the invoice price. Greener Homes Grant and Enbridge HER+ funds arrive as non-taxable cheques or e-transfers. Reliable itemises rebates separately so your accountant sees a clean paper trail.Lead-time realities?• Stock steel slab: ~5 days • Textured fiberglass: ~10 days • Custom colour or SDL grille: ~15 days. Holiday rush or factory maintenance can add 2–3 days. Reliable’s portal shows live ETA the moment your entry door installation order is locked.What’s the warranty?Fiberglass skin & frame: 25 yrs • Poly-iso core insulation: R-value guaranteed 20 yrs • Glass seal: 10 yrs • Labour (install & adjustments): 3 yrs. Keep your digital torque report—warranty service is free if all hinges still read ≥ 25 in-lb.DIY allowed in condos?Almost never. Most condo declarations classify front doors as fire-rated “F” assemblies or part of the common element. Board approval and licensed residential door services are mandatory to keep the fire-door certificate valid.What R-value do I really need?For detached or semi-detached GTA homes, R-10 doors meet Energy Star Zone 3. R-16 energy-efficient doors deliver best payback (~$90 / yr gas savings) and qualify for the $250 Greener Homes rebate.Will a multipoint lock fit my old frame?Only if the jamb is plumb and at least 1-1⁄8 in thick. Most older pine frames flex; pros add a steel-reinforcement plate during door replacement to handle the three-bolt spread.Exterior door cost vs ROI—rule of thumb?Energy savings + insurance discount should pay back ≥ 40 % of net cost within five years. Example: a $1 660 fiberglass door that saves $94 / yr gas + $42 / yr insurance pays back 41 % in Year 5—textbook ROI.Can I reuse my sidelights?Only if the dimensions and glass spec match the new slab. Often, swapping to Low-E sidelights adds R-2 and shaves installation labour because the frame stays intact.Disposal of the old slab and jamb?Included. Reliable recycles steel skins and composites under Ontario EASR regulations at no surcharge—one less hidden exterior door cost item.Financing options?0 % six-month promo for qualified homeowners; 6.99 % for 36 months. Financing paperwork is signed on the technician’s tablet at the end of the installation visit—no bank branch needed.Permits required?Same-size swap: No permit. Widening or adding sidelights: Yes—Reliable provides engineer-stamped drawings for $185 flat, refundable if you proceed with the full install contract.Can I get colour chips before ordering?Absolutely. A mobile sample case contains 20 standard hues plus six wood-grain films. Choose during the quote visit so manufacturing lead-time starts immediately. These deeper answers help you compare apples to apples—and ensure your next door replacement delivers savings, security, and zero-surprise paperwork. Key Takeaways (Screenshot-size) - ⏱ Pro swap in < 6 h → door off the hinges at breakfast, airtight & alarm-ready by lunch. - 🛠 R-10+ foam core → recoups its price in heating dollars 3 winters faster than a hollow R-6 slab. - 🔒 Multipoint lock = insurer smile → typical GTA premium cut 3 – 5 % once the underwriter sees the certificate. - 📑 CSA + Energy Star stickers → unlock $250–$350 in Greener Homes / Enbridge rebates—money wired back in weeks. - 🔇 Laminated lite (+6 dB STC) → Gardiner roar sounds like a distant fan; peace adds curb-appeal value. - 🌧 Composite threshold & PVC cladding → zero rot, zero repaint, zero HOA fines for at least 25 years. Follow these six checkpoints and a door replacement stops being an expense—it becomes a pay-back-within-two-years investment that’s quieter, safer, and maintenance-free. Ready for Quote? - Meet our team — About Us - Compare styles & prices — Glass & Doors - Book your 15-min estimate — Quick Quote Form Reliable Windows & Doors—turning drafty thresholds into statement entries since 2009. External References - Natural Resources Canada R-value tables — https://www.nrcan.gc.ca/ - ENERGY STAR Canada door specs — https://www.energystar.gov/ Read the full article

[nidhimishra5394]

Double sided tape market expected to grow steadily due to rising demand across packaging industries.

The double sided tape market has experienced notable growth in recent years, driven by rising demand across a wide range of industries including automotive, construction, electronics, and packaging. As manufacturers continue to innovate and end-users increasingly recognize the functional and aesthetic advantages of tape-based bonding over mechanical fasteners, the market's trajectory appears set for continued expansion. However, this evolving landscape is shaped by a complex web of factors both accelerators and inhibitors that define the market dynamics.

Market Growth Drivers

One of the primary drivers of the double-sided tape market is the shift toward lightweight and aesthetically seamless bonding solutions. In industries like automotive and aerospace, where reducing weight is directly linked to improved fuel efficiency and performance, double-sided tapes serve as a viable alternative to screws, bolts, and welding. These tapes not only reduce the overall weight of the final product but also offer vibration dampening and thermal insulation, which are critical to performance.

The consumer electronics sector is another major contributor to demand. With the proliferation of compact and multifunctional gadgets such as smartphones, tablets, and wearables, there is an increasing need for tapes that can provide strong, thin, and invisible bonds. Double-sided tapes help manufacturers achieve minimalistic designs while maintaining structural integrity. The ability of certain high-performance tapes to withstand thermal stress, moisture, and UV exposure makes them ideal for this segment.

Restraining Factors

Despite the positive outlook, certain factors restrain the market’s potential. One significant challenge is the volatility in raw material prices. Double-sided tapes are typically made using adhesives such as acrylic, rubber, or silicone, and backings like foam, film, or paper. The cost and availability of these materials are subject to fluctuations due to geopolitical tensions, supply chain disruptions, and environmental regulations, affecting the overall pricing structure and profitability of tape manufacturers.

Another challenge lies in product standardization and regulatory compliance. Different industries have unique performance standards and environmental requirements, necessitating extensive product customization. This increases the cost and complexity of production, especially for small and medium-sized enterprises.

Regional Insights and Competitive Landscape

Geographically, Asia-Pacific dominates the double-sided tape market, both in terms of production and consumption. Countries like China, India, South Korea, and Japan have extensive manufacturing bases in automotive, electronics, and packaging, contributing significantly to market demand. North America and Europe follow, with a growing focus on sustainable and high-performance adhesive technologies.

The competitive landscape is characterized by both global players and regional specialists. Key companies such as 3M, Nitto Denko Corporation, Tesa SE (Beiersdorf AG), and Avery Dennison lead the market through extensive R&D, product innovation, and strategic acquisitions. The growing trend toward sustainability has also prompted these companies to invest in eco-friendly adhesives and recyclable tape materials, in alignment with global environmental goals.

Future Outlook

The future of the double-sided tape market looks promising, particularly with the expected advancements in adhesive chemistry and smart materials. Developments such as pressure-sensitive tapes with sensing capabilities or biodegradable tapes could unlock new applications and market segments.

Overall, the market is expected to maintain a steady growth trajectory, fueled by the ongoing industrial shift toward flexible, efficient, and non-intrusive bonding solutions. However, success in this evolving space will hinge on manufacturers’ ability to balance performance, cost-efficiency, and environmental compliance in their product offerings.

[atplblog]

Price: [price_with_discount] (as of [price_update_date] - Details) [ad_1] Product Description CEZO Condenser Mic Professional Condense Microphone Set [Condenser Microphone for Singing] CEZO Condenser microphone with sound card is a professional mic which is designed on cardioid pattern for pick up the collected sounds are more focused, and less noise as you speak around the sides and the bottom of the mic, and it is widely used pattern in professional microphones. The BM 800 Mic shock mount suspension isolates your studio microphone from handling and floor noise by decoupling it from the rest of your room which makes this mic an ideal singing mic. The shock mount accommodates microphones from 55mm to 60mm in diameter. It screws into any standard mic stand. This BM 800 condenser microphone all set feature's extremely quiet self-noise, In technical terms: a noise level of just 16 dB(A). Thus, this studio mic is perfectly suited for vocals and audio drama productions in high definition as well as for demanding samples production and instrumental recordings. CEZO Condenser Microphone Set Focus on professional Condenser Microphone Bundle CEZO Condenser Microphone Bundle can not only meet your basic podcast needs, At the same time in DSP chip, greatly reduces the noise, and can produce high-quality sound for live streaming. Before using the CEZO Podcast Equipment, please ensure the devices have sufficient power right connection to ensure that you have a better product experience. Why Choose CEZO Condenser Microphone Bundle Professional Recording Studio Equipment With Professional Live streaming Audio Mixer : Equipped with BM-800 microphone, Shock mount, Pop filter, Mic adjustable suspension scissor arm stand, Anti-wind foam Cap, Power cable, Sound card. Professional Digital Audio Mixer V8 Sound Card Reverb, treble, bass, recording, music, monitor, mic adjustment The sound card V8 voice changer provides these knobs, you can adjust and use these functions according to your preferences Home Karaoke, Voice Chat, Tiktok, Live, Facebook, YouTube, Periscope, Livestream,, Wechat, Smule, multiple live platforms and more, Plug and Play. You can do various Anchor in anytime and anywhere, Video game anchor, Outdoor anchor, YouTube anchor, Indoor anchor. Connection Method Computer/Laptop 1.To live broadcast one a computer/laptop, you need to connect the charging port(not LIVE1/LIVE2) of the sound card through the charging cable. 2.The computer will automatically identify and install the sound card driver Smart Phone 1.Use the charging cable to connect the charging port(Until the lighe comes on) 2.Connect the phone to the LIVE1/LIVE2 on the sound card via AUDIO CABLE(APPLE/TYPE-C reauires and adapter. An Ideal Condenser Microphone Setup For Singers, Podcasters & Content Creators Podcasting and Broadcasting Take your podcast or broadcasting endeavors to the next level with the CEZO BM 800. Its wide frequency response and low self-noise make it an excellent choice for capturing clear and professional-grade audio.

Engage your audience with crisp and articulate voice recordings, interviews, discussions, and storytelling, making your content stand out from the rest. Voice-Overs and Narrations If you're in the voice-over industry or need to record narrations, the CEZO BM 800 is an exceptional tool for the job. Its sensitivity and accuracy allow you to deliver captivating and expressive voice-overs for commercials, documentaries, audiobooks, animations, and more. The microphone's clarity ensures your voice shines through, captivating listeners and immersing them in your narrative. YouTube and Content Creation For content creators on platforms like YouTube, the CEZO BM 800 is an invaluable asset. Whether you're recording tutorials, reviews, unboxing videos, or vlogs, this microphone captures your voice with utmost precision and fidelity. Enjoy the benefits of clear and professional audio, enhancing the overall production quality of your videos and engaging your viewers on a whole new level. Crystal-Clear Vocals Capture the true essence of your vocals or instrument with the CEZO BM800. Its studio-grade condenser capsule delivers transparent and detailed sound reproduction, ensuring every nuance and subtlety is captured. Whether you're recording vocals for songs, podcasts, or voice-overs, or capturing the sound of instruments such as guitars, pianos, or drums, this microphone will bring out the best in your performances. 【Upgraded Podcast Equipment Bundle】The podcast microphone bundle is equipped with BM-800 podcast mic, a stable and adjustable microphone arm, Shock mount, Pop filter, Anti-wind foam Cap, Power cable. newly-designed live sound card. The audio signal is stable and clear using a digital DSP intelligent processing chip, and intelligent noise reduction has no delay. This studio equipment integrates an audio interface into one operation panel, One set can meet all your needs. 【Multifunctional Live Sound Card】 This podcast equipment bundle is not only fully compatible with most mainstream operating systems such as Windows and Mac IOS but also compatible with iPad/ smartphones(iPad, iPhone,adapters may be required). can be used for DJ, music studio recording, condenser microphone, karaoke online,podcast, live stream, and YouTube streaming, Facebook,voice mixing. The sound mixer board is also a voice changer for gamers who play games online. [V8 Sound Card Mixer]--This podcast microphone / professional mic singing itself offers a high audio resolution with a 120kHz sample rate and 24-bit depth, besides, you can use podcast mixer to control the audio/ add special effects/ change vocal record effects and tune tone. 【Functional Recording Studio Package】This voice changer has multiple sound effects. You can connect to different devices (computer/ mobile phone/ laptop) by using different connection methods. Change your voice anytime, anywhere, call with friends, chat on for WeChat, live and sing, take video on TikTok, Youtube, etc. The podcast equipment bundle will bring more fun to you and make your recording more creative. 【STURDY BOOM ARM】The microphone uses Full Metal Construction to protect the microphone from being hurt easily as well as the internal structure,sturdy and durable to bring you better recording effects,Podcast microphone kit with adjustable scissor boom arm is made of an aluminum alloy structure, Foldable, easy to carry offering 360°rotation to get the best pickup.

Foldable,easy to carry [ad_2]

[ahm-building-materials]

The Best Power Tools Every Construction Worker Should Have

Introduction

Power tools are essential for any construction worker, contractor, or DIY enthusiast. They enhance productivity, improve precision, and make tasks easier compared to manual tools. Whether you're working on a large commercial project or a small home renovation, having the right power tools can significantly impact efficiency and the quality of work.

In this guide, we'll discuss the must-have power tools for every construction worker, highlighting their benefits and uses. If you're looking to upgrade your toolkit, you can buy industrial hardware tools online from trusted suppliers like AHM Building Materials for top-quality products at competitive prices.

1. Cordless Drill: A Versatile Essential

A cordless drill is one of the most versatile power tools every construction worker should own. It is used for drilling holes, driving screws, and even mixing materials like paint or plaster with the right attachment. The convenience of battery-powered operation makes it ideal for working in areas without easy access to power outlets.

Modern cordless drills come with variable speed settings, interchangeable drill bits, and ergonomic designs for ease of use. Whether you're assembling structures or installing fixtures, a high-quality cordless drill is a must-have in any construction toolkits for professionals.

2. Circular Saw: Precision Cutting Made Easy

A circular saw is an essential power tool for cutting wood, plastic, and even metal. It provides clean and precise cuts, making it indispensable for framing, flooring, and roofing tasks.

Most circular saws come with adjustable cutting depths and angles, allowing users to make straight, bevel, and plunge cuts efficiently. For construction workers handling large volumes of cutting work, a corded circular saw offers uninterrupted power, while cordless models provide greater mobility.

3. Angle Grinder: A Must-Have for Metalwork and More

An angle grinder is a powerful tool used for cutting, grinding, and polishing metal, concrete, and stone. It is widely used in metal fabrication, masonry, and even for removing excess material from surfaces.

With the right disc attachment, an angle grinder can:

✔ Cut through rebar, bolts, and pipes ✔ Grind rough surfaces and welds ✔ Polish metal surfaces for a smooth finish

Safety is crucial when using an angle grinder, so proper protective gear, including gloves and safety goggles, should always be worn.

4. Impact Driver: Power-Packed Fastening Tool

An impact driver is a high-torque tool designed for driving screws and bolts with minimal effort. It is particularly useful for heavy-duty construction tasks where a regular drill might struggle.

Unlike standard drills, impact drivers use a hammering action that provides greater force without stripping screw heads or causing wrist fatigue. This makes them ideal for working with dense materials like hardwood, metal, and concrete.

For construction professionals, investing in a high-quality impact driver ensures fast and efficient fastening, reducing project completion time.

5. Reciprocating Saw: The Ultimate Demolition Tool

A reciprocating saw is a powerful cutting tool commonly used in demolition and remodeling projects. Unlike circular saws, which are designed for precision cuts, reciprocating saws excel in rough and fast cutting through wood, metal, drywall, and plastics.

This tool is perfect for:

✔ Removing old framing and cutting through nails ✔ Trimming pipes, conduits, and other tough materials ✔ Pruning trees and landscaping work

With the right blade, a reciprocating saw can tackle almost any cutting or demolition task on a construction site.

6. Rotary Hammer Drill: Heavy-Duty Drilling Solution

For construction workers who frequently drill into concrete, stone, or masonry, a rotary hammer drill is an essential tool. Unlike standard drills, rotary hammers use a piston mechanism that delivers powerful impact force, making them highly efficient for drilling into tough surfaces.

This tool is ideal for:

✔ Installing anchors, bolts, and rebar into concrete walls ✔ Chiseling through masonry for renovations ✔ Drilling large-diameter holes in solid materials

When working with heavy-duty lifting equipment and structural installations, a rotary hammer drill is a must-have power tool.

7. Table Saw: Essential for Woodworking

A table saw is a staple in woodworking and construction projects requiring precision cutting of lumber and plywood. Unlike handheld saws, a table saw provides stable and consistent cuts, making it an excellent choice for carpentry, cabinetry, and flooring installations.

Features to look for in a good table saw include:

✔ Adjustable blade angles for bevel cuts ✔ A powerful motor for smooth and clean cutting ✔ A sturdy fence system for accurate measurements

For professionals working on wooden structures and furniture projects, a table saw is an indispensable investment.

8. Power Sanders: Achieving a Smooth Finish

Power sanders are essential tools for smoothing surfaces, removing old paint, and finishing wooden or metal structures. There are different types of sanders, including:

✔ Belt sanders – For heavy material removal ✔ Orbital sanders – For smooth and fine finishing ✔ Detail sanders – For small and intricate areas

Using a power sander ensures that surfaces are even, polished, and ready for painting or sealing.

9. Tile Cutter: A Must for Flooring and Tiling Work

For construction workers involved in tiling and flooring projects, a tile cutter is an essential tool. It allows for precise cutting of ceramic, porcelain, and glass tiles to fit any space perfectly.

Electric tile cutters offer:

✔ Smooth, chip-free cuts with minimal effort ✔ Adjustable cutting angles for custom designs ✔ Dust and water control systems for cleaner workspaces

Having a reliable tile cutter ensures high-quality tile installations with professional results.

10. Nail Gun: Speed Up Framing and Finishing Work

A nail gun is a time-saving tool used for framing, roofing, flooring, and carpentry work. It eliminates the need for manual hammering, significantly reducing labor time and effort.

There are different types of nail guns, including:

✔ Framing nailers – For heavy-duty construction work ✔ Brad nailers – For delicate woodworking and trim installations ✔ Roofing nailers – For attaching shingles and roofing materials

Using a high-powered nail gun ensures secure and precise fastening for various construction tasks.

Conclusion

Every construction worker needs a reliable set of power tools to enhance efficiency, accuracy, and safety on the job site. Whether it's a cordless drill for fastening, a circular saw for cutting, or a rotary hammer drill for heavy-duty drilling, having the right tools makes a significant difference.

For top-quality power tools and construction equipment, visit AHM Building Materials and explore a wide range of professional-grade tools at the best prices. Investing in the right power tools ensures faster project completion, better craftsmanship, and a more productive work environment.

[hpalloy]

Explore HP Alloy's Premium Screwdriver Sets Online

In the realm of do-it-yourself enthusiasts and professional craftsmen, a reliable screwdriver set is an indispensable companion. HP Alloy, a trusted name in precision tools, offers an exceptional range of screwdriver sets available for purchase online. With a commitment to quality and durability, HP Alloy has become synonymous with excellence in the realm of hand tools.

Navigating the online marketplace for the perfect screwdriver set can be a daunting task, but HP Alloy simplifies this process by providing a diverse array of sets tailored to meet the unique needs of different users. From simple household repairs to intricate mechanical projects, there's a set crafted to perfection for every requirement.

One notable feature of HP Alloy's screwdriver sets is the use of high-quality alloys in their construction. This not only ensures longevity but also guarantees optimal performance, even in the face of challenging tasks. The ergonomic design of the handles further enhances the user experience, promoting comfort during prolonged use and minimizing fatigue.

Buy screwdriver sets online at HP Alloy offers the added advantage of convenience. The user-friendly website provides detailed product descriptions, allowing customers to make informed decisions based on their specific needs. The sets are competitively priced, making them an attractive option for both DIY enthusiasts and professionals looking for value without compromising on quality.

Moreover, HP Alloy's commitment to customer satisfaction is reflected in their prompt and secure delivery services. Customers can rest assured that their chosen screwdriver set will reach them in pristine condition, ready to tackle any project that comes their way.

In conclusion, when it comes to buying screwdriver sets online, HP alloy steels & mill store stands out as a reliable and reputable choice. With a combination of superior craftsmanship, durable materials, and a user-friendly online shopping experience, HP Alloy continues to be the go-to destination for those seeking top-notch screwdriver sets to elevate their toolbox.

[olderjodijournals]

Thursday, July 1, 1993

 

Now that I have a night off, I can finally catch up in here with all that’s been going on. Since the Candy Store and the Mile High screwed me over, I knew I had to go a distance. Favors is a half-hour away. The money’s so much better, though, that I’m glad I got screwed over. If I’d known about private room dancing, I’d never have bothered with bars.

So anyway, let me back up to June 27th. Late afternoon I went to Tom’s house for the first time. His house is old for AZ. It’s a corner house that was built in 1950. All of them are right around there in that subdivision. They’re tract houses. A little too small and definitely too close to the neighbor. Their driveway is just a few away. His house is about 1400 square feet, and to be honest, it’s pretty ugly. Especially the bathroom and kitchen.

Friday, July 2, 1993

 

So last Sunday Tom and I swam in his pool, talked and had a field day with his computers. He’s very lucky cuz he’s got 8 computers and I have a busted typewriter.

So far Tom’s been a perfect gentleman who insists I never need to worry about him trying to move in on me or change me, as much as he really likes me and is attracted to me.

The following day he turned 36 (although I tease him and say 41).

I slept on his couch and on Monday he took me to Favors. It sure is a piece of cake. No hustling, no loud smoky bars and no latex. Most of the time you sit on your ass. Every week we pay $30 in security fees. If you cut $300 or more a week - and you will - you pay $50 for advertising fees. Tuesday night I cut $245! I only took home $175 of it cuz of fees and cab fare. Steve and his day driver, Bob, have cut my fare from $15 to $10. This place is a half-hour away, but right near Tom.

I’ll stay at Tom’s some days that I work. Especially on Mondays cuz that’s when the landscapers come. They are here earlier now due to the heat. I still hear the blowers daily, but not right by my window, and I sleep with the radio on. I knew they’d keep going back on their word at the office, even though it’s still much better and quieter than the other apartment.

Wednesday night I had only one show, but I made $70. I’d never make as much in bars. I work 4 days a week from 5:30-1:00. Wednesday I worked 40 minutes of my 7½ hours for $70. Tuesday I worked only 2½ for $245. I’ll never have a set schedule, though. The days will vary. When no one’s doing a show, or you’re not, we eat, watch videos, or whatever we want. There’s a kitchen and we can order food too.

Later I’ll write about my projects on Tom’s computer as well as other stuff.

Later...

I am going to bed real soon and I hope to hell no blowers wake me up. Why do they need to do this every day?

The guy downstairs has a weird habit. He sleeps with his bedroom window open, yet has his AC on too. What a waste.

I slept on the couch at Tom’s place which was very comfortable compared to mine. I may take his bed tomorrow as he said it’d be no problem for him to sleep on the couch.

I’m too tired to write about what I did with the computer.

Sunday, July 4, 1993

 

I am at Tom’s house right now and I’m finally going to update all that’s been going on.

My typewriter’s dead, so I’m doing it this way. His computer is awesome and it has several styles of really neat printing. I’d give anything to be able to print into my journals this way. Tom says you can if you buy a binding system. This way you just buy the covers and paper, type onto the paper, then bind the thing together into a book. I’d also just die to have a computer and a printing machine of my own cuz it sure makes things a lot easier. I’ve got to save up hundreds of dollars though. Or maybe $200 to get the parts to build a computer with Tom who already has certain parts. He already has a printer he does not use and he’s gonna check into prices as far as the binding thing goes.

So far I’ve already typed up letters to my parents, Tammy, and the girls, Fran, Nervous, Bob, Kim and Rosemarie. Soon, I’ll do letters to Scott, Stacey, Barbara, Ellie, Andi and whoever else comes to mind along the way. For now, I’ll copy into my journals whatever I type up, then send off the printed sheet to various people.

Work at Favors is going really well. I usually only work with Alyssa or Monique and they’re really cool. I’ve only worked 4 nights so far and I got $70 for my second and third nights. Last night I didn’t make anything. There was only one show and Alyssa got it. It’s a good thing Monique called out of work. The money’s still much better than the bars. You make much more for much less work. If you have only one one-hour show for the whole night, you’ve made $80. You’ll never always get that in the bars, whether you bust your ass trying to or not.

I saw the pictures that Ron took. All 27 of them were on a contact sheet. I saw the one that’s going into The Beat magazine that goes throughout Phoenix. There’s another one that’ll go on a shelf along with other dancers’ pictures at the front entrance of the place.

The last time I wrote I left off with what Tom and I did for Nervous, Fran, Bob, Kim and Tammy. Tom has dirty pictures that we printed out onto their letters. For Fran and Nervous we found dirty pictures with bodies close enough to mine and we cut the faces off them. We told them that Tom took nude Polaroids of me, then we ran them into the computer which printed them out onto their letters. These suckers will surely fall for it. I did the same thing for Bob and Kim, but in Kim’s letter, I explained the truth along with what I told Fran, Nervous and Bob. I put a nude picture in my sister’s letter along with flowers, birds, butterflies and pigs. My parents and the girls got flowers and stuff like that.

Last night was sure funny at work. Andy envies me cuz he has to slave his ass off all day. We watched a movie, danced to the boombox which was cranked to the max, ate like pigs and even pulled pranks on each other. At one point I crashed on the couch for about an hour cuz I didn’t sleep too well here the last night when I slept here. Then Alyssa woke me up saying the doorbell rang. I knew I didn’t hear it and she opened the door and no one was there. Later, Mike, the security guard, rang the doorbell and I pulled the same joke on Alyssa.

Toward the end of the night, we played a great joke on Mike. We called the telemarketing line and I used my girlie voice asking if there were any girls who’d lick my pussy. It was quite hilarious.

I have to work tomorrow, then I have the next 3 days off. There are only two things that suck, though. One is that my schedule’s never the same, but it will be 4 nights a week. The other thing is that I must call in at 5:30 even when I’m off to see if I’m needed to come in. If I don’t I get fined $25. So when I’m off, I’m still on call.

Whenever I’m to work on a Monday, I stay at Tom’s cuz of the landscapers. Tom really helped me get started with this job, but I owe him $50. I should have no problem paying him back before the month is out. Andy owes me money too, but I told him to only pay me back some of the $135 till he knows the outcome of his case with Scott. We also want to rent a camcorder, so I may have him use some of the money towards that.

I’ve paid $400 of my rent and all of the $108 owed to US West and all of the $58 owed to Sprint. All I owe is $89 to APS and $100 in rent. Pretty good, huh? And it’s only the 4th.

Andy left a message saying that he spoke to a guy who lives next to Stevie Nicks and that she did get Shadow and his box. Andy says he has her address and I told him to leave it on my machine. I’ll write to her and explain why I had to give him up at the time and see if she has him or if she gave him away. I don’t think it’ll do me any good, but it’s worth a shot.

I think I have everything updated for now that’s important, except for Ellie. Well, Andy finally got over there and was able to call my place. Sure enough, her number came up. I’m really shocked that such a paranoid loon like her wouldn’t have gotten her line blocked from caller ID. Her name’s Eloisa F.

Monday, July 5, 1993

 

I’m at work right now. Only Sarah and I are working tonight. She got a show, but I’ve got nothing so far. Jay, the security guard’s taking me home, which is great, especially if I don’t make anything tonight due to the holiday. There are always holidays.

I’m watching a movie now and soon I’m gonna have a cigarette. Maybe some coffee, too.

I have the next 3 days off, but I’m on call Tuesday and Thursday.

I spoke to Andy a little while ago. He was reading part of a 9-page letter he wrote his mother. He only got to page 3 when the doorbell rang, but I said I’d call him when I got home. If he’s asleep I’ll hear the rest of the letter tomorrow. He’s gonna be seeing someone about a job impersonating Stevie Nicks.

This Thursday when The Beat comes out, Tom’s gonna get 8 copies. For Bob, Kim, Nervous, Fran, Andy, Tammy, my parents and myself. I’m gonna be topless in this shot, so the one going to my parents will have my tits covered in black marker.

I slept until 8 PM on Sunday, but believe it or not, I fell asleep at 7:30 at Tom’s. He forgot to turn off the ringer and the volume on his machine so I woke up twice. At 8:30 Andy called. At 9:30 his co-worker Wendy called. Luckily I fell back asleep after that till 3:30.

Thank God I got this job when I did, cuz they only like to have 8 girls. Everyone’s new except Sarah and Kayla. Then, there are Alyssa, Monique, Amber, Gabrielle and me. Lea also dances at times.

Later...

It’s 10:30 now and still no more shows. So we ordered food and now I’m watching TV.

Last night I typed a letter to Scott. I have a few more folks to send letters to.

Later...

I am staying up till 8:00 to call the office when it opens. I can’t fucking believe these people! I’m so sick of dealing with apartment management. Why do they keep going back on their word? First, they promised no blowers early in the morning and that’s hit or miss. Now I got a letter from Dan. They promised me up front I could pay $300 on the 3rd, then take the remainder of the month to pay the remaining $200. I explained up front about SS and SSI and the fact that I get paid in chunks here and there. Keri told me that if over half the rent’s paid, there are no late fee charges. Now this letter says I must pay in full and I must add on $4 a day after the 4th of late fees. Those fucking assholes. I should’ve had them put this oral agreement into writing.

I finally found a way to get a natural-looking tan without dying in the sun, getting sun poisoning, or going to tanning salons, which is just as dangerous. I bought a sunless tanning lotion for $3 and it works great. I’ll never be white again.

I hope to talk to Tom when he gets in and after he hears my many messages.

I tried calling Tammy twice, but she finally got an answering machine. Her outgoing message is so long and she sounds sooo serious.

When Tom and I stopped in Smith’s grocery store I bought a journal with ballet slippers. It’s so cute, but I don’t know if I’ll like it. It’s so small compared to my others.

Jay and I had an interesting talk at work about the music business. He once lived in L.A. and did security for celebs till he moved here. He mentioned stuff I already know, as well as other stuff I never thought of that makes perfect sense. I’ll get into it later, but he told me a sure way to never again be conned by another Scott M.

Later...

I have had a very enjoyable day off. As soon as I awoke I called Keri who said don’t worry about the nasty-o-gram. They have it noted on the computer as far as my arrangement. The computer also routinely does these letters and they must give them to me. She said I’ve been very good about getting the rent paid, so don’t worry unless they call me. Thank God this is taken care of. This is the last thing I need to deal with.

She also asked how my new job was which was at the Candy Store, but I told her how they dicked me over and I got hired at Favors. I also told her about The Beat and she said to bring in copies. I told her they were topless, so she could either get a copy of her own or I’ll show her one of mine.

I also could swear I heard keys jingling outside my door earlier while I was watching Poltergeist. Maybe it was next door, cuz Scott’s had plenty of time and he’d never enter with me in here. I never heard the key go into the door either.

Nervous is supposedly broken up with Linda and is now either friends with or dating a girl named Crystal. Two different nights she answered his phone. Nervo was shocked to hear Laurie H is gay, cuz he, as well as others, say she’s married and pregnant. She’s a closet butch and I told him earlier I’d send the tape of her and Andy along with her so-called confession about a girl named Donna.

The ballet journal came with 2 little heart-shaped keys. One will go to Fran and the other will go to Nervo. I don’t need them. They’re also getting my journal stuff I did up on the computer. Any stuff I don’t want them to read goes in no-postage-necessary envelopes.

Tomorrow I hope to get the 50 love stamps I ordered.

I must call the bank for a photocopy of the check I sent for address labels. I never got them, but that’s ok, cuz now I need new ones anyway with this apartment number.

I got a $19 killer outfit from the same girl who goes to the Mile High to sell stuff. She says it’s still dead and it always will be till they fold under. It’s a deep royal blue 1-piece. The top’s like a tank top, connected to what looks exactly like a short wide skirt which is really shorts.

Back in 1989, my dad got me a gorgeous floral skirt at Steiger’s in Longmeadow, but it’s ripped. Alyssa at work is a seamstress and she says she’ll fix it for $5. Cool.

I ordered a meatball grinder and a big chef salad. Boy, I needed that.

I spoke to Dad earlier and updated him on my life.

Wednesday, July 7, 1993

 

I rearranged my photo albums earlier. I sent my parents a postcard from a family we met while I was having ear surgery in 1978 in Boston. They were from Caracas, Venezuela. They spoke no English and back then and I spoke no Spanish. I could never translate what they wrote on the back of the picture till I learned Spanish. It’s not much, but they said: Recuerdos de Boston, Noris familia - junio 1978 - Caracas, Venezuela.

Translation: Memories of Boston, Noris family - June, 1978 - Caracas, Venezuela.

Later...

I can’t sleep yet, so I’ll write a bit, then listen to music.

I finished edit tape #2 for Tom who’s now sick with the stomach flu.

A few days ago (I don’t remember how the subject came up), I was mentioning how to call information state by state. You use whatever the area code is where you’re calling, then dial 555-1212. He began to laugh his ass off saying 555 is in the movies. Of course, I went to his phone and proved him wrong.

I left a message about who I’m sending copies of my picture in the “Beat Off.”

I also read him part of “Saundra’s” story that I wrote.

Tom used to work at the post office and he goes there all the time, so he’s gonna bring in the huge mailbag I’m sending Tammy and the girls. I would never even try to guess how many stamps to put on, so it’ll be better this way. I sent old shirts, skirts, bathing suits, a necklace and those 5 posters I colored with markers on the black velvet background. I’ll have to refill the space on the master bedroom wall where they were.

I’m gonna call the bank tomorrow and also see if Montgomery/Ward will shoot a picture tomorrow night. If they can’t get me in so soon, I’m seeing Andy’s new place either way. It’d be better for Tom to take me there, plus they could meet, but our schedules clash. Tom has a set night schedule, Andy has a set day schedule, and my night schedule’s always different.

Andy’s gonna give me $70, plus a nice shirt and Andi’s (Andrea’s) tax thing that says she owes the IRS a little over $100.

I almost cried earlier, cuz I miss Gloria’s pictures that my mom just had to up and ditch. I think there’ll always be a bit of bitterness in me cuz of it. I don’t think I can ever fully forgive her for a stunt like that.

I have a few old and ugly pictures of me I no longer want. Also, some shitty drawings from when I first began. They’re ready for the next NPN envelope available.

I went back as far as journal 36 and counted all the taped-in pages of Bob’s envelopes or stuff I typed. There are 66, but there could be a few more in the earlier ones. Sure wish I could have Journal 1 to the current one all in different styles of print from the computer. Maybe someday.

Thursday, July 8, 1993

 

Yesterday morning I didn’t fall asleep till 10:30! I set my alarm for 4:30, but kept hitting the snooze till 7:30.

Andy didn’t get here till 10:30. He did not want me to see his place cuz he says it’s trashed. His brother sent his stereo so he’s got boxes all over. He loves his new place but says all the people who work there are incredibly rude. There’s a guy above him too, who has two little kids running around like crazy here and there. Especially on weekends. The office said they’d do whatever they could, even evict him if the problem continued. Then, a day later he said they said, “Well, we know him. He’s a good friend of ours.”

As if to say - fuck you. So he’s gonna have me call there and say I used to live there and I want their main office address to write in great things. Then, he’ll write in how he feels and sign it.

I’ve been having unfortunate vibes about him being unhappy there, despite how much he loves his apartment He says there are car alarms always going off, people always park in fire and handicapped lanes and blast their music.

He brought us stuff from McDonald’s as well as $70. He also gave me a gorgeous shirt. It’s of rayon-type material with bright neon colors streaking through a black background. He gave me 4 no-postage needed envelopes, a funny tax form thing, Andrea’s tax bill for $174, Stevie’s address and an address and phone number for two different things.

The same agency (Carefree Records) is looking for female models for CD covers, videos and whatever else. Also, a wealthy investor is looking for talent, (I guess that means singers).

I’m on call tomorrow, then I work the next 4 nights.

At 7:30 yesterday morning I left Stacey’s edits on the VV machine. At 9:00 Andy, Sarah and I were on the phone. Andy decided to call her and thank her for being a credit reference when he rented the CD player. Also, to see if she’d say anything.

Paula quit, but as Katrina (Paula’s replacement) answered, we could hear her and Judy saying, “That’s weird!”

It’s just our luck that Stacey’s on vacation this week. I’ll do it again next week and I’ll make it even better. The part where she says, “It’s our goal to provide you with the best service,” will be replaced with, “It’s our goal to provide you with nothing.” I know I have Nervous saying the word “nothing” around here somewhere. I’ll use him for that word.

Speaking of Nervo, I spoke to him last evening. He really does believe those nude computer prints are of me. I told him to expect The Beat, the tape, and letters, and I updated him on my life.

I laughed when he said he’d never waste his money on a computer, cuz all it is is a glorified typewriter.

Yeah, sure.

He said Linda moved to Kentucky and now he’s dating Crystal. From her telling me they’re just friends, and by the sound of her voice, I doubt they’re dating.

Andy agreed that my tan looks natural, but my feet are too white and the palms of my hands are too dark.

I gave him about 20 bars of soap, cuz I like gel soap better.

Later...

After I spoke to Nervous, I called Kim. She’s still having Bob problems. She was over at his place recently and he asked her if she’d make love to him. She told him she didn’t know whether to laugh or to kill him. She’s expecting a please-forgive-me letter any moment.

Why does she go see him? I know she only does once in a great while, but if she’s so fed up with him, why does she bother?

She and Alex aren’t always getting along. She says he’s quite emotional. She still hopes to get out here by the fall, but I’ll still have to see it to believe it.

Bob will never move out here. He’s the type to consider things out loud but never does them. I’ll tell him this in my next letter, cuz come on. Does he think I’m stupid? Shockingly, I’ve received no letters from him lately. Probably too depressed. Kim hasn’t sent the letter I wrote to him from “Nick.” She says she will this week from Vermont.

I still have to call the bank and get my picture taken one of these days.

I’m gonna get my period any minute. I’m sooooo bloated. My tits are killing me and I have slight cramps that tell me it’s on its way. I’ll have to cut the tampon cord at work. Fun, huh?

Later...

I just made popcorn and listened to music. I even sang a little. Soon I must take my meds.

I called Heather, who trimmed my bangs when I first got here. Her husband answered and I left my number. I need 2” trimmed. It hasn’t been trimmed in 9 months and the ends are very split. It’s getting a bit scraggly looking.

Tom gets in at 8:00 and I told him to call. Whether or not I’ll be up, who knows?

I realized something if I ever get a binding system. That is that there’s plenty of room on the sides of the paper after you print whatever on it to punch holes in, then put it in a 3-ring notebook. There’s a 2” margin on both sides, but you can adjust that too, however you want it.

God! I want a computer and a printer badly! Will I have my very own within a year? I sure hope so, but I don’t ever count on anything till it’s been done.

I owe only $55 this week in fees, but I sure hope I make great money Friday - Monday. I want to get the $100 paid to the office, the $89 to APS and $50 to Tom. I need groceries, too. I have to ask my dad about taxes. Lea tells the tax guy how much each girl made quarterly. I guess I must file at the end of the year. Does this mean I’ll owe money? Especially since all my money’s made in cash? If I end up owing, will it be a ton of money?

I’ve done 17 journals since I got here, but of course, it’s more like 13 or 14 cuz of large print, drawings and other odds and ends.

Andy also brought me 25 pages or so from a 100-page chain letter his friend Donna got. I sent 5 pages in a no-postage-necessary envelope and 20 to Nervo.

Boy, do I look really tan! Wish I got this stuff a long time ago. Well, I’ll never be white again, but I must get plastic gloves. I look as if I have a black person’s hands. Wouldn’t it just be wonderful, though, if this stuff was permanent and never faded? I’m even surprised the stuff’s stayed on this long.

I must go get my meds and make myself coffee which I haven’t had all day.

I’ll finish this journal in a little while, then begin with 41, the one with ballet slippers.

Later...

I just took my meds and had coffee. Just tried to call Tammy, too. It rang and rang and rang. Not even their machine came on. Where the hell are they? I wish they were on their way to see me. When in the hell will my family ever get out to see me? Will it be years? I hope not.

Later...

I am now listening to a tape of Nervous, Fran, and Andy and I’m putting it on Tom’s machine. Later I may do some editing. I’ve got tons of stuff to edit.

I set the alarm for 4:30, but I hit the snooze till 5:30, then I called into work. Everyone was there.

I spoke to Tom briefly at 6:00. He’s picking me up from work tomorrow. Then, we may come back here so I can get shit I don’t want to lug into work with me. I may stay over at his house Friday - Sunday night.

I briefly spoke to Andy and I watched TV.

For 3 days now I’ve been trying to reach Tammy, but there’s no answer. I called Mom (Dad was out playing cards). I said how much I miss everyone and she said that maybe she and Dad could come see me next spring or summer. Who knows when Tammy and the girls will ever get here?

Mom gave me the same story I get from her every year. She’s sending me old pictures. Yeah, right. Then, she said she was keeping pictures of me. She said something about sending me pictures of my apartment. Which apartment? I’ve only had 9. Then she said she was sending an envelope, then changed it to a package. I wish she’d send my Gloria pictures.

Friday, July 9, 1993

 

Well, I ended up looking through my journals, rather than editing. I left messages on Andy’s and Tom’s machines. I’m so fucking bored! I just don’t feel like editing right now. I feel like doing stuff on the computer and I wish Tom didn’t have such long hours and I wished Andy worked nights.

I hope I make good money over the next 4 nights at work. I must remember to bring Alyssa the skirt she says she’ll fix.

I never got a call back from Heather about trimming my hair. I’ll try again some other time. I know she just had a baby, so maybe she’s busy.

Guess I’ll go listen to music now, even though I’m in the mood to write. Days will go by when tons of shit happens, but I’m not in the mood to write. I’m in the mood now, but I’m all caught up and there’s nothing to write.

Today, since my stamps didn’t come, I only mailed the NPN envelopes. I mailed two plates in the name of “Rachel D” to Tom’s but of course, they’re for me.

Gloria’s Greatest Hits, along with her new all-Spanish album, Mi Tierra, wasn’t in the record club applications in the TV guide. Tammy asked me to send her some, so I used the name Kelly something and sent her some. Then there were 3 out of 4 NPN envelopes Andy gave me. One had part of that chain letter. One had an old, ugly picture and drawing. The other had phone numbers and addresses I copied into my phonebook. Here, I have about 6 envelopes to mail to Nervous. One has the tape of Andy and Laurie H. Also, there are letters to Fran, Mom and Dad, Scott and other stuff I can’t think of now. I sure hope my stamps come tomorrow and I still have to call the goddamn bank.

I’ll be at Tom’s for most of the next 4 days and I won’t be taking this journal. I’ll update it on the computer, copy it in and send it off to Fran, Nervous, or whoever the hell I want.

Later...

I am still wide awake and thinking of my pictures. God, do I miss them! I wish she really did keep them (of course out of spite) but she planned to send them within a year. I’m sure she really threw them out, though. I’ll never forgive her for that, let alone ever be able to forget. But, how great it’d be if I got a package that was large enough to hold them all, opened it up and there they were! Yeah, right. Dream on. First she said it was an envelope, then a package. Well, if I open my mailbox to see a regular envelope, I’ll know they’re not there. They’d be too big.

Many many years ago when I was into Charlie’s Angels, I supposedly got in big trouble. She said she ditched all my scrapbooks of them, but it turned out that she kept them. She only said that out of spite and to scare me and depress me.

Thursday, July 15, 1993

 

Well, today’s Linda’s birthday. I forget exactly how old she is.

Been through a lot of shit lately, and since I can’t sleep, I figured it’d be a good time to write.

Favors let me go last week, so I’m back in the same old shit again. Lea let me go saying business is slow. That’s true, but why the fuck did she hire me if she knew this? She said she was letting others go too, but I don’t know who.

So anyway, I still got my picture in The Beat and it was okay. I’ve sent copies to my parents, Tammy, Nervous, and Keri wanted a copy.

Backing up in order of events, well, I got that package of pictures. Tammy said she got one, too. Great. I wonder just how many other old and very ugly embarrassing pictures of me Ma has. They were mostly of my nieces. Some were of Mom and Dad and some old pitiful ones of me. I threw them in an NPN envelope. There were some various nature scenes and an old one at the beach. Dad was sitting at the beach all wet and sandy. Behind him, all holding pails, was me (at age 5), Andy, and what I think are my first cousins Lori and Lisa who are sisters. I also noticed this picture was torn in half. Must’ve been Andy’s parents, Larry or one of the many people they fought with.

She sent back my apartment pictures of 2001, but none with me. I’m gonna send them to Nervo.

Tomorrow night Andy’s taking me to audition at the Excalibur, and win or lose, I’m gonna see his place.

Tuesday, July 20, 1993

 

I have quite a bit of updating to do, so I’m gonna try to do it as quickly as I can cuz I have some letters to copy in.

I had a nice talk with Lisa yesterday as well as with Tammy. Tom was here when I called her and I said, “Guess what I did to Tom?”

Tammy goes, “Well, you didn’t have sex with him.”

No, but I rubbed a cotton ball all over the stubble on his face!

Tammy got the package but said 90% of the stuff no one could use.

Speaking of K.D. Lang, the other day at the pool she was amazingly calm.

Andy’s had some chats with Ellie, but I must remain quiet when on the 3-way otherwise she’ll hang up.

Dad was bitching at me over a call he got from a collection agency. I’d hung up on him for going off on me for various stupid reasons. Our credit is fucked up now for 7-10 years. For me, it doesn’t matter as I couldn’t afford a house anyway. Not with the business I’m in being so unpredictable. Plus, there are more bills and responsibilities.

Later...

I’m gonna call Andy back in 5 minutes. We called Andrea at work and next, he’s gonna call Stacey. He’ll thank her for giving him good references and I’ll edit what I can from that as well as put the other stuff on the machine there. Yesterday I recorded Tom saying the word “nothing.” I let her say, “Our goal is to provide you with,” then Tom filled it in with “nothing.”

Later...

Andy’s on the phone now talking to Ellie.

Andy briefly spoke to Stacey. It was pretty funny. At the end, Stacey said she was tied up. Andy asked if Judy untied her.

Andy’s been harassing Crystal a lot, so it turns out. I didn’t even know this. That’s Scott’s girlfriend and of course, it’ll piss him off.

Shortly after 9:00, I got a message from a detective asking me to call him but I doubt it was really a detective and I’m not calling anyone I don’t know.

Later...

In between phone calls, I’m going to write.

Keri has a copy of me in The Beat. She really liked it and she asked me for a copy. Andy said he thought about that and wondered why I don’t do anything. Well, I’m attracted to Keri and I’m pretty sure she’s attracted to me, but what can I do? People who work here aren’t allowed to mingle with tenants as far as I know. If I knew she was leaving I may speak up, but there’s nothing else I can do. Maybe if she did not work here and was single something would happen, but this is how it always is. This is why one of the reasons why more and more I realize I’m not a woman’s woman. Yes, I’m gay. That’ll never change, but I think whoever’s up there wants me with men. There’s a reason why they’re all I can get (other than butches). I was always taught that when you can’t get what you really want you should try for the next best thing.

With each day that goes by, I’m more and more comfortable and impressed with Tom. So far, the inside of him I like 100%. He’s a great person. Totally unlike your average person, let alone the average male. No lust whatsoever on the outside, but he has beautiful eyes. I won’t make any decisions overnight and he’s not pushing me in any direction either. He respects the fact that I’m not sure yet whether or not to settle. I may give it a little more time to continue seeing that I’ll never have lust, but every 1-2 years. Then, in time, perhaps he won’t be such a major settlement. He’s no Ron or even a Brenda. I feel so relaxed with him. I can totally be myself. He’s so calm and never tries to change me. He understands my fears and doubts, though, and knows I don’t want to get trapped in anything which may be hard to get out of. He knows I also believe that sex can kill a friendship. He agrees that’s true for most people, but I don’t think he believes that for us. He’s one of the very few guys I believe would never cheat on a woman, but he doesn’t want an open relationship.

I explained the DES to him and said I was too small for penetration. I asked if he could live without that. He said absolutely yes if he loved the woman, and there’s way more to sex than that.

Well, right now I don’t know what to do, but while I’m still young, I don’t want to waste my time waiting for lust to come around once a year or so. It may be time to settle, but I’ll never live with anyone, get married, or have kids.

I feel like I’ve known Tom forever, but a reality check says I’ve known him only two months. Maybe within a year, or by the end of ’93, I’ll settle. It will take time and guts. I’m not brave enough or ready yet, but I am determined to learn to settle (within reason). Never could I settle with just anyone.

Yesterday Tom and I went to the Excalibur. He waited outside. Not that he couldn’t handle me in only a G-string, cuz he’s seen me that way before, but he’s just not a bar person. He has some coworkers who go in there and his friend Wendy used to work there.

I’m gonna work Wed-Sat from 7 PM – 1 AM. I was gonna be Brandy, but someone has that name, so I’m back to Mystery.

Later...

Boy, this day’s getting better and better by the minute.

Well, true to my feelings, that guy was no detective. He left two dirty messages for Andy. They were funny, though. Before he called Andy, I sure got freaked out when there was a knock at my door. I didn’t move till I heard my door open, then, “Maintenance!” Bill changed my AC filter.

The guy that called Andy and I was associated with Crystal.

And now here’s more Keri news. I called to tell her I had several bottles of perfume to get rid of due to my allergies. I didn’t want to toss them out and she was the only one I could think of who may want them. I brought them to the office and she said, “Perfect timing.” She was very pleased and we chatted for nearly 10 minutes. She’s now promoted to manager. I said that she’d be a great friend if one of us left here. She wholeheartedly agreed. I also think she may be pregnant again, too.

She asked about work and stuff in general. She said, “Well, hopefully someone will see you in The Beat and say, we want her!”

Speaking of wild fantasies, it’d sure be nice if she called to say, “Now that I’m manager, your rent’s only $400.”

Even if we could be friends, who knows if we’d end up in bed?

Last week I spoke to Frances (Alyssa). She was bitching out her sister, but we did have a cool talk for over an hour. She did say she was bi as I figured.

Yesterday, Tom and I also went to a restaurant, got that blood work done, got my Theodur refill and got some groceries. I ran out of the Azmacort inhaler and am trying to do without it. So far, so good.

I’m making Tom a bracelet out of that flossy-like yarn as well as more edits and a few Bonnie Raitt songs he likes.

Kim left a message the other day and played me Bob’s message. He got his letter from Nick and was crying and bitching about it. Kim says maybe I can edit him, but it’s so muffled. I got a letter from him about it and I’ll mail it to Kim. Kim says she mailed me a letter, as well as one she got from Bob. I got two yesterday from Bob and guess who also wrote me? Fran! Can you believe it? Finally! He actually writes better than I thought, but he did have a few funny mistakes. I’ll soon copy it in as he wrote it.

I called Fran last night, then he called Nervo. He was in his mood and after cussing at he hung on silently for a while. Long enough to hear Tom whom I called. Tom finally got to talk to Fran. Fran also called his local crisis center where I complained about seeing cactuses and palm trees.

Later...

Shortly after I last wrote I got a call from my doctor’s office. My white blood cell count’s too high. Probably a urinary infection and my stomach’s been killing me and I’m very bloated. Tom came over, I played him the convos of Andrea and Stacey, went there, took a leak and came back. I must return to the vampire next week to see if there’s any change in my white blood cell count.

On my way up here, I met the couple who moved in next door. They said they moved in today, but I didn’t hear a thing. They’re a young couple, both good-looking, named Brian and Amanda. Amanda’s pretty good-looking. They sort of look like partiers, but I hope not. They look like the type to have lots of loud company and fights but I’ll try not to judge till I see. Current Location: Arizona

[igoldenlaser]

Cheapest 4×8 Plasma Table for Sale

Cheapest 4×8 Plasma Table

This is a 4×8 CNC plasma table cutter,it is very popular in the metal process industry.The 4×8 plasma table cutter has many advanced CNC plasma parts.Such as the high precision plasma cutting head, which has high precision cutting performance and cutting speed. And The aluminum profile gantry beam of this machine is a light duty and fast speed.A 4×8 CNC plasma cutting table is a versatile tool for small to medium-sized businesses and workshops involved in metal fabrication and metalworking. Its ability to cut metal sheets with precision, speed, and efficiency makes it an essential asset for those requiring high-quality and cost-effective metal cutting solutions.

so if you like this 4×8 plasma table for sale, we will provide the most affordable price and the most comprehensive service, please leave your contact information.

iGOLDEN CNC plasma cutting tables are configured with a motion controller that sets the bar for acceleration and deceleration rates, a plasma cutter that increases cut speeds and outlasts competing consumable life cycles by nearly 3x, and a linear motion system that hits gantry and torch travel speeds of up to 500 ipm.  All of these features accelerate cost savings for our customers.  The faster cut speeds and higher acceleration and deceleration rates reduce job cycle times and increase the amount of metal parts your shop is able to sell.

Key Features of Cnc Plasma Cutting Table:

Cutting Area: The 4×8 5×10 table provides a spacious cutting area, allowing for the processing of large metal sheets. This is particularly useful for industries that require large-scale metal cutting, such as metal fabrication, manufacturing, and construction.

Plasma Cutting: Plasma cutting is a thermal cutting process that uses a high-velocity jet of ionized gas (plasma) to melt and remove metal from the workpiece. It is known for its speed and versatility in cutting various thicknesses of metal.

CNC Control: The machine is controlled by a computer with CNC software. Operators can input cutting designs, and the CNC system precisely controls the movement of the plasma torch to follow those designs, resulting in accurate and repeatable cuts.

Precision: CNC plasma cutting table offer high precision and accuracy in cutting metal materials, making them suitable for applications that require tight tolerances and intricate designs. Material Compatibility: These machines can cut a variety of metal materials, including mild steel, stainless steel, aluminum, and other alloys. They are versatile and adaptable to different types and thicknesses of metal.

Speed and Efficiency: Plasma cutting is a fast and efficient process. The high cutting speeds and minimal heat-affected zones reduce production time and labor costs. Customization: Operators can create custom cutting designs, making it possible to produce unique components and parts. This is useful for applications in which specialized or one-of-a-kind pieces are required.

Minimal Material Waste: Plasma cutting produces minimal waste, which is cost-effective and environmentally friendly.

Reduced Setup Time: CNC plasma cutting table are designed for quick and easy setup, which is advantageous when switching between different cutting tasks or designs.

CNC Plasma Cutter

The term CNC stands for Computer Numerical Control. That is a CNC cutter will cut through metal using ionized gas with computerized command. A CNC plasma cutter is a type of computer numerical controlled automatic cutting system that uses ionized gas torch to cut metals into different profiles and shapes with CNC controller, including mild steel, stainless steel, carbon steel, galvanized steel, hot rolled steel, cold rolled steel, iron, brass, copper, alloy, aluminum, bronze, and titanium.

A CNC cutter kit is composed of machine frame, controller, power supply, gas torch, blade or sawtooth table, driver, motor, control system, software, guide rail, ball screw, optional parts and consumable parts. Some of the synonyms of a plasma cutter are cutting torch, arc cutter, cutting machine, arc welding cutter, cutting system, plasma table, metal cutter, cutting tool, arc welding machine, or plasma cutting device.

What Are The Types of Plasma Cutters?

The most common types of plasma cutters include the handheld and CNC variant (hobby types and industrial types). The most common power supplies include Huayuan power supply and Hypertherm power supply.

According to the working methods, the kits can be divided into air kits, dry kits, semi-dry kits and underwater kits.

According to the cutting quality and precision, you will meet the types of ordinary, fine, laser-like, and so on.

According to the appearances, the three types are listed bellow:

Portable CNC Kits

Gantry CNC Kits

How To Use A CNC Plasma Cutter & Cutting Table?

For people who have never used a gas cutter or plasma table with computer-controlled controller. This is an easy-to-follow guide with software installation, setting, debugging, parts assembly, setup, and operation.

Manual Non-Contact Cutting.

Step 1. Touch the torch roller to the workpiece, and adjust the distance between the nozzle and the plane of the workpiece to 3-5mm. (When the machine cuts, the “Cut Thickness Selection” switch is upscale).

Step 2. Turn on the torch switch to ignite the plasma arc. After cutting through the workpiece, move to the cutting direction at an even speed. The speed is based on the premise of cutting through. Too slow will affect the quality of the incision and even break the arc.

Step 3. After working, turn off the torch switch and the arc goes out. At this time, compressed air is sprayed out at a delay to cool the torch. After a few seconds, the ejection stops automatically. Remove the torch to complete the entire process.

Manual Contact Cutting.

Step 1. The “Cut Thickness Selection” switch is at the low level, and it is used when cutting thinner metal plates by a single machine. Step 2. Place the torch nozzle at the starting point of the workpiece to be cut, turn on the torch switch, ignite the arc, cut through the workpiece, and then move uniformly along the cutting direction. Step 3. After working, open and close the torch switch. At this time, the compressed air is still spraying out. After a few seconds, the spraying will stop automatically. Remove the torch to complete the entire process. Automatic Cutting. Step 1. Automatic cutting is mainly suitable for cutting thick workpieces. Select the “Cut Thickness Selection” switch position.

Step 2. After removing the torch roller, the torch and the semi-automatic machine tool are firmly connected, and the attachment is provided in the random accessories.

Step 3. Connect the power of the semi-automatic cutting system, and install the radius rod or guide rail according to the shape of the project (if you need to cut arc or circle, a radius rod is required).

Step 4. If the torch switch plug is turned off, replace the remote switch plug (prepared in the accessories).

Step 5. Adjust the appropriate walking speed according to the thickness of the workpiece. And set the “up” and “down” switches on the semi-automatic cutter to the cutting direction.

Step 6. Adjust the distance between the nozzle and the workpiece to 3-8mm, and adjust the center position of the nozzle to the starting strip of the workpiece slit.

Step 7. Turn on the remote control switch. After cutting through the workpiece, turn on the power switch of the semi-automatic machine to cut. In the initial stage, pay attention to the seam at any time and adjust to a suitable speed. And pay attention to whether the two machines work normally at any time.

Step 8. After cutting, turn off the remote control switch and the power switch.

At this point, the entire process is completed. Manual Cutting Circle. According to the material and thickness of the part, choose the single or parallel cutting method, and choose the corresponding cutting method. Tighten the cross bar in the random attachment to the screw hole on the torch holder. To the required radius and tighten, then adjust the distance from the tip to the torch nozzle according to the length of the workpiece radius (the width of the slit must be considered). After adjustment, tighten the center fastening screws to prevent loosening, and loosen the cage to tighten the knurled screws. At this point, you can cut the workpiece.

[latestmarketresearchnews]

Composites Market Business Analysis, Share, Revenue & Sales Till 2030

The global composites market size is expected to reach USD 163.97 billion by 2030, registering a CAGR of 7.2% over the forecast period, according to a new report by Grand View Research, Inc. The demand for composites is expected to witness significant growth owing to the rising fuel prices and stringent government regulations have shifted automobile manufacturers focus on light-weighted components which would further propel the market demand over the forecast period.

Composite products play an essential role in the manufacturing of automotive and aircraft parts. The growing concerns regarding fuel consumption and CO2 emission levels have prompted the manufacturers to use carbon fiber composite materials as substitutes for metal components. Technological innovations to minimize the manufacturing cycle time is expected to propel the usage of composites in the automotive sector.

The high cost of composites has limited their application scope to premium segment cars. However, key players are conducting extensive R&D activities to develop low-cost composite grades with similar mechanical properties as that of the high-cost variants. This is expected to spur the demand for the product in the automotive industry over the forecast period.

Gather more insights about the market drivers, restrains and growth of the Global Composites Market

Composites Market Report Highlights

The glass fiber segment accounted for the largest market share in 2022 and is further expected to grow at a CAGR of 6.4% on account of increased penetration in pipe manufacturing applications owing to the strength and durability of these composites. Additionally, glass fiber comprises several thin that find application in building & construction, automotive, industrial, energy, and consumer goods

The layup process segment is forecasted to grow at a CAGR of 9.0% by 2030. The market is again forecast to grow due to easier technology applications and the requirement of less expensive machinery. The process involves placing multiple layers of composite fiber in a sequence by using a matrix of resin and hardener

The automotive & transportation segment dominated the composites market with a revenue share of USD 19.70 billion in 2022. This is attributed to its advantages such as fuel saving to the transportation sector as the components are significantly lighter in weight that allows ascending fuel efficiency

The demand for composites in Asia Pacific was the largest in the global market due to the increase in air passenger traffic, rise in automotive vehicle production, and ambitious electrical & electronics production capacity addition targets set by various governments in the Asia Pacific including China, India, Japan, and South Korea

Various initiatives such as technology innovations, research & development, partnerships, and merger & acquisitions to manufacture cost-effective and lightweight composite products have been undertaken by the key market players. Prominent players have patented technologies used for composites manufacturing

Browse through Grand View Research's Advanced Interior Materials Industry Research Reports.

Aluminum Composite Panels Market: The global aluminum composite panel market size was estimated at USD 6.47 billion in 2024 and is expected to grow at a CAGR of 7.0% from 2025 to 2030.

Centrifugal Pump Market: The global centrifugal pump market size was estimated at USD 39.80 billion in 2024 and is projected to grow at a CAGR of 4.2% from 2025 to 2030.

Composites Market Segmentation

Grand View Research has segmented the collated screws market on the basis of product, manufacturing process, end-use, and region:

Composites Product Outlook (Volume, Kilotons; Revenue, USD Billion, 2023 - 2030)

Carbon Fiber

Glass Fiber

Others

Composites Manufacturing Process Outlook (Volume, Kilotons; Revenue, USD Billion, 2023 - 2030)

Layup Process

Filament Winding Process

Injection Molding Process

Pultrusion Process

Compression Molding Process

Resin Transfer Molding Process

Others

Composites End-Use Outlook (Volume, Kilotons; Revenue, USD Million, 2023 - 2030)

Automotive & Transportation

Wind Energy

Electrical & Electronics

Construction and Infrastructure

Pipes & Tanks

Marine

Others

Composites Regional Outlook (Volume, Kilotons; Revenue, USD Million, 2023 - 2030)

North America

US

Canada

Mexico

Europe

Germany

France

Italy

UK

Spain

Asia Pacific

China

India

Japan

South Korea

Central & South America

Brazil

Argentina

Middle East & Africa

Order a free sample PDF of the Composites Market Intelligence Study, published by Grand View Research.

[researchreportinsight]

Composites Market 2030 Overview, Regional Outlook, Growth Report

The global composites market size is expected to reach USD 163.97 billion by 2030, registering a CAGR of 7.2% over the forecast period, according to a new report by Grand View Research, Inc. The demand for composites is expected to witness significant growth owing to the rising fuel prices and stringent government regulations have shifted automobile manufacturers focus on light-weighted components which would further propel the market demand over the forecast period.

Composite products play an essential role in the manufacturing of automotive and aircraft parts. The growing concerns regarding fuel consumption and CO2 emission levels have prompted the manufacturers to use carbon fiber composite materials as substitutes for metal components. Technological innovations to minimize the manufacturing cycle time is expected to propel the usage of composites in the automotive sector.

The high cost of composites has limited their application scope to premium segment cars. However, key players are conducting extensive R&D activities to develop low-cost composite grades with similar mechanical properties as that of the high-cost variants. This is expected to spur the demand for the product in the automotive industry over the forecast period.

Gather more insights about the market drivers, restrains and growth of the Global Composites Market

Composites Market Report Highlights

The glass fiber segment accounted for the largest market share in 2022 and is further expected to grow at a CAGR of 6.4% on account of increased penetration in pipe manufacturing applications owing to the strength and durability of these composites. Additionally, glass fiber comprises several thin that find application in building & construction, automotive, industrial, energy, and consumer goods

The layup process segment is forecasted to grow at a CAGR of 9.0% by 2030. The market is again forecast to grow due to easier technology applications and the requirement of less expensive machinery. The process involves placing multiple layers of composite fiber in a sequence by using a matrix of resin and hardener

The automotive & transportation segment dominated the composites market with a revenue share of USD 19.70 billion in 2022. This is attributed to its advantages such as fuel saving to the transportation sector as the components are significantly lighter in weight that allows ascending fuel efficiency

The demand for composites in Asia Pacific was the largest in the global market due to the increase in air passenger traffic, rise in automotive vehicle production, and ambitious electrical & electronics production capacity addition targets set by various governments in the Asia Pacific including China, India, Japan, and South Korea

Various initiatives such as technology innovations, research & development, partnerships, and merger & acquisitions to manufacture cost-effective and lightweight composite products have been undertaken by the key market players. Prominent players have patented technologies used for composites manufacturing

Browse through Grand View Research's Advanced Interior Materials Industry Research Reports.

Aluminum Composite Panels Market: The global aluminum composite panel market size was estimated at USD 6.47 billion in 2024 and is expected to grow at a CAGR of 7.0% from 2025 to 2030.

Centrifugal Pump Market: The global centrifugal pump market size was estimated at USD 39.80 billion in 2024 and is projected to grow at a CAGR of 4.2% from 2025 to 2030.

Composites Market Segmentation

Grand View Research has segmented the collated screws market on the basis of product, manufacturing process, end-use, and region:

Composites Product Outlook (Volume, Kilotons; Revenue, USD Billion, 2023 - 2030)

Carbon Fiber

Glass Fiber

Others

Composites Manufacturing Process Outlook (Volume, Kilotons; Revenue, USD Billion, 2023 - 2030)

Layup Process

Filament Winding Process

Injection Molding Process

Pultrusion Process

Compression Molding Process

Resin Transfer Molding Process

Others

Composites End-Use Outlook (Volume, Kilotons; Revenue, USD Million, 2023 - 2030)

Automotive & Transportation

Wind Energy

Electrical & Electronics

Construction and Infrastructure

Pipes & Tanks

Marine

Others

Composites Regional Outlook (Volume, Kilotons; Revenue, USD Million, 2023 - 2030)

North America

US

Canada

Mexico

Europe

Germany

France

Italy

UK

Spain

Asia Pacific

China

India

Japan

South Korea

Central & South America

Brazil

Argentina

Middle East & Africa

Order a free sample PDF of the Composites Market Intelligence Study, published by Grand View Research.

[fift33nfathoms]

A guide for Replacing JP PSP 2000 Screens

Hello!!!!!

I was inspecting my PSP and realized that my screen had a chip/dent that distorts the image quality 😢. So I decided to replace it, and record my experience while doing so!

I stumbled across many hurdles that didn't have solid answers(COUGH SCREWS COUGH), due to the type of PSP I own (2000, JP ver. ). So, I wanted to make a post that detailed EVERYTHING required to replace a screen. Hopefully this helps!

Purchasing Supplies

I found the best luck for PSP parts on Ebay, especially since shipping is considerably cheaper and faster in comparison to Amazon. However, I have seen sites like this:

https://everythingpsp.com/ - (Made by a top-rated eBay seller)

Which offer parts at a good price, although I can't 100% vouch for them.

I personally bought my LCD screen from here , since they have alot of reviews and are an American seller (same country = faster shipping). They also offer an add-on kit with most of the random supplies you may need (electrical tape/glue, wedge to pry open delicate parts, Phillips screwdrivers, etc.), which saves a lot of energy, BUT, everyone's device is different.

If you have an American PSP, then that's all you really need, but if you have the Japanese version, you probably need a Torx screwdriver with a T1, T2, and T3 size. The kit doesn't have this (Only T5/T6), so you'll have to buy it in person or online.. They're easy to find in a set. I personally purchased my screwdrivers on Amazon, however this specific set doesn't come with a casing.

Why am I saying a range of Torx screwdrives instead of 1? Well, in my experience, I needed 2 separate sizes (T2, T3) to remove the Torx screws (even though they looked deceptively close to a T5, and generally just looked similar) ... So to save yourself the hassle; buy a set. Dunno why my PSP came with different Torx screws, but I guess I'm just unlucky! 💀

If you're unsure of what type of screws you have, watch the videos later in this post, and inspect your PSP. Everything should be visible without disassembling (You'll have to take out a battery and possibly remove a sticker though.) You're specifically looking for the shape of the screws, which will resemble the patterns in this diagram:

These are labelled, and will allow you to identify the screw type when purchasing. I personally needed Phillips and Torx.

So, here's my recommendation on what to buy:

Torx T3, T2, and T1 screw drivers (Buy in a set with larger sizes to be safe. If you have an American PSP then you shouldn't need this, but again read what I said above this. T1 isn't NECESSARY, but better safe than sorry?)

1.5 Philips screw driver (3.0 mm)

2 Flat, wedge/like tools for removing parts

Electrical Tape/Glue (Optional, I personally didn't need it but good to have.)

Screen Protector, 'cos the screen and casing are VERY scratch prone

Installation

To be honest, I'm not a tech guy, so I won't bother explaining how to do this word for word. However, here are some videos that I followed exactly, and they should work for you. Beyond the screws, JP and USA PSP's are mostly alike, with some differences that are insignificant for what we're trying to accomplish. I'll also piggy back off the information given with my own tips so you (hopefully) don't screw up your PSP!

This video has a good angle of how to install the LCD screen cables into the motherboard, go to (7:22)

Keep your screws in a safe place! I personally put them in plastic baggies, just incase I knock something over. This prevents scattering, and possibly losing screws. You REALLY don't wanna do that, since these screws keep the casing of your PSP together. You could also use a cup, bottlecap, or anything really.

2. Be careful, especially when removing the casing and screen. Those are the harrowing part of the installation, since too much force can genuinely ruin the motherboard, or rend a button or two useless. Take your time, and ease it out.

3. When inserting the screen cables into the motherboard, make sure it's in there completely. It should be a snug fit . The second video perfectly shows how it can be done, but again every console is different.

4) KEEP YOUR OLD SCREEN, until you've confirmed that the new one works. I've read some horror stories of new screens having dead pixels, scratches, etc., and you only find out once the new screen is installed. For this reason, hold onto your old screen until you've confirmed that all is good.

Here's a video of me installing the screen!

But honestly, this is not the hardest of things to do. As long as you're gentle, and follow the instructions then ya should realistically run into no problems. It's a pretty quick installation, with all things considered, so yeah! Hopefully this was helpful, and stay tuned for more PSP modding posts! If you have any questions, feel free to ask!

Cheers!

[atplblog]

Price: [price_with_discount] (as of [price_update_date] - Details) [ad_1] Product Description Product Information:-Audio Video Sync Supported: Converts HDMI digital signal to VGA analog signal; 3.5mm audio port sends audio to speakers or a display(3.5mm stereo cable included).1080P Full HD Resolution: HDMI-VGA Adapter supports resolution 720P/1080i/1080P, 3D, HDMI V1.4. Plug & play, No driver or program required. With this HDMI to VGA with audio, it is easy to create a home theater or make presentations at meetings.Broad Compatibility: It can work with a desktop, notebook, ultra-book, notebook, projector, DVD, HDTV, media player, cable box, or other devices with an HDMI connection.Plug and play, no drivers required, no external power supply required. Support High Resolutions:-The HDMI female to VGA male converter supports resolutions up to 1920x1080@60Hz (1080p Full HD) including 720p, 1600x1200, and 1280x1024 for high-definition monitors or projectors.Lightweight & Portable :-The compact-designed HDMI to VGA adapter connects a computer, desktop, laptop, or other devices with an HDMI port to a monitor, projector, HDTV, or other devices with a VGA port; Tuck this lightweight gadget into your bag or pocket to do a business presentation with your laptop and projector, or extend your desktop screen to a monitor or TV.Individual 3.5mm Audio jack:-3.5 mm mini-jack audio cable. There are sturdy screws on both ends that will not fall easily. with a VGA connection via an additional HDMI cable. A 3.5 mm audio connection sends the voice to the speaker or display. The audio is played synchronously, ideal for home cinema and business presentations.Only HDMI to VGA:-Built-in advanced IC chip converts HDMI digital signal to VGA analog signal; It is not a bi-directional converter and can not transmit signals from VGA to HDMI. Specification:-HDMI male to VGA female converter with audio Input Interface A: HDMI FemaleOutput Interface B: VGA Male, Audio jackMax Resolutions supported: 1080pDrivers free, plug and playHDMI in VGA out - It’s NON-bi-directional, and can’t support VGA computer to HDMI monitor.Note:-1. To avoid noise, please make sure the audio cable is plugged into place steady2. HDMI into VGA out adapter does not support ARC function3. For the connected devices, please set up the resolution to 1080P or below 1080P. How to use:-1. Insert the VGA interface into the display device.2. Plug the USB and Audio connector into the related interfaces.3. Connect the HDMI cable to the HDMI female interface, and then connect the HDMI cable other head to the displayer or projector with the HDMI interface.4. Play the video, PPT, and documentation, the images will be displayed on the screen of the other display device. Package List:-1 x HDMI-VGA Adapter1 x Audio cable.

Wide Compatibility - HDMI source is compatible with all Desktop/Notebook/TV Stick/Raspberry Pi/Tablet PC/Digital Set-top Box/Digital Camera/SLR Camera/Video Camera that has HDMI port; VGA source is compatible with all TV/Monitor/Project/LCD/TV and other displays that equipped with VGA port. Gold-plated connectors is compatible with desktop, laptop, Ultrabook, notebook, DVD, media player, cable box, or other devices with HDMI port. ★ 【 Audio Video Sync Supported】 Converts HDMI digital signal to VGA analog signal; 3.5mm audio port sends audio to speakers or a display(3.5mm stereo cable included); power supply interface: Micro USB backup power supply, solve the problem that high power device used instability with insufficient power supply. ★ 【1080P FULL HD Resolution】HDMI-VGA Adapter support resolution 720P/1080i/1080P, 3D, HDMI V1.4. Plug & play, No any driver or program required. With this HDMI to VGA with audio , it’s easily to create home theater or make presentations at meetings. ★ 【Convenient and convenient】Portable HDMI to VGA adapter / converter. Simply connect older computers / notebooks with HDMI output to a TV, monitor or projector with VGA input to stream videos, play games or share content. ★ 【Widely compatible】desktop, notebook, ultrabook, notebook, projector, DVD, HDTV, media player, cable box or other devices with HDMI connection. Plug and play, no drivers required, no external power supply required. ★ 【What You'll Get？】1x HDMI to VGA adapter / converter &1x3.5mm Stereo Cable included，Months Product Warranty and Lifetime Technical Support, backed by 24/h friendly customer service. [ad_2]