#autohex

[danielenigmatool]

#merrychristmas #vendocuadros #enigmatool #dashcoder #dc4 #neox #ecuservice #flex #autohex #autovei #magicmotorsport #magicmotorsportflex #carprotool #ultraprog #pomona #feliznavidad #wesolychswiat #wesołychświąt #buonnatale #natal #christmas #merry #cars #car #electronics (en Autoelectrónica MD) https://www.instagram.com/p/CmbWfZBN48w/?igshid=NGJjMDIxMWI=

[weixy-electronics]

Test platform cable specially designed for BMW 6HP EGS TCU to work with Autohex II

✅Using this test platform cable, you can use Autohex II on the bench to reset the BMW F series 6HP EGS TCU to the initial state, which facilitates the reuse of the second-hand control unit. You don't need to do it in the car, but you can do everything on the bench

[eobdtooluk-blog]

How to Download, Install and Activate ECUHelp HTProg?

This post comes with the user guide of ECUHelp HTProg. You will learn what this product is, and how to use it (download+ install+ activate).

What is ECUHelp HTProg?

HTprog is a comprehensive tool. It can be used to perform chip tuning, ECU clone, BDM read / write, Flash data edit, key reset, and BMW ISN read, etc.

There are three configurations for selection.

Option 1: ECUHELP HTprog Full Version (Adapter +Cables + Dongle)

Works alone! No need to work with ECUHELP KT200

Package Includes:

1pc x MPC Module

1pc x EEPROM module

1pc x +12V Power Supply

1pc x BDM adapter

1pc x Tricore adapter

1pc x USB

1pc x Software Dongle

Option 2: HTprog Adapter and Cables for KT200

Works with ECUHELP KT200, not work alone.

Adds more ECUS and TCUS protocols, strengthens the cloning function, and supports more protocol cloning, also read and write car body modules, and refresh keys.

Package Includes:

1pc x MPC Module

1pc x EEPROM module

1pc x +12V Power Supply

1pc x BDM adapter

1pc x Tricore adapter

1pc x USB

Option 3: HTprog Clone Adapter for ECUHELP KT200

Works together with ECUHELP KT200, not work alone.

Can perform Chip tuning / ECU Cloning, on bench programmer, EEPROM programmer, and key function etc.

Package Includes:

1pc x KT200 clone adapter

1pc x MPC module

1pc x TriCore cable

1pc x USB cable

ECUHelp HTProg detailed functions instruction:

Chip Tuning / ECU Cloning:

With HTprog you can read and write P-Flash, D-Flash, External Flash and external EEPROM with the option of automatically checksum correction, you will have many methods in most of ECUs:

1.Factory mode (On Bench for most of ECU/TCU): with this option you don't have to open the ECU cover. Just plug some wires for power and signals and you are ready to go.

2.Tricore Boot Mode for all Tricore ECU: Opening the ECU is mandatory to connect the boot wire on the ECU board. This method is useful when the ECU is not responding.

3.BDM (Background debug mode)

4.JTAG for Renesas and Freescale

BDM Read / Write:

With HTprog you are able to break the protection of immobilizers like CAS in BMW, EIZ/EIS in Mercedes Benz, BCM in Volkswagen and Porsche, etc.

Built in Editors:

With HTprog you can edit many Flash data like:

Edit CAS3+ VIN, ISN and keys

Edit CAS4, CAS4+ VIN, and ISN

Edit mileage for BMW instrument clusters

Other functions:

You can do key reset for many brands like Audi, BMW, MINI, Porsche, Toyota, Fiat, Renault, etc.

Read/Write a wide range of SOP8 EEPROMs

Works side by side with Autohex to make keys

Key Features:

Master version. One License for all protocols on bench.

Supports one of the largest ECU/TCU list in Cars and Trucks for ECU cloning and Chip Tuning

Supports both old and latest ECU / TCUs from Bosch, Continental, Delphi, Marelli, Denso, Tenic, RW and Valeo, etc

Reads all BMW long ISN from BMW DME and DDE including MD1 and MG in F/G series

IMMO BDM Read/Write:

With HTprog you are able to break the protection of immobilizers like CAS in BMW, EIZ / EIS in Mercedes Benz.BCM in Volkswagen and Porsche, etc.

How to download ECUHelp HTProg software?

Just free download HTProg software by the following mega link.

https://mega.nz/file/8rJxhB5J#g1jnHe9yBfho7N1Y_0KiZyBM71HwuM6-gyhN4BsW_zg

Software version: 1.0.45

Size: 65.2 MB, no password

Compatible operating systems:

* Windows 7

* Windows 8/8.1

* Windows 10

* Windows 11!

Minimum recommended requirements:

CPU > 2.5 GHz (Intel i5, i7)

RAM > 8GB

NOTE:

1.It is advised to uninstall any antivirus software and disable the firewall before using the ECUHELP HTprog.

2.It is important not to upgrade the software to avoid any potential damage to the hardware.

3.Activation of the HTprog is necessary and should be done using the user's registered email address.

How to Activate HTProg Software?

After downloading, follow the on- screen prompts to install software.

Connect HTprog Clone Adapter to KT200 device, and then connect to the computer

Run HTprog software, it will prompt you to enter your email address.

Enter your email address and wait for the activation link to be sent to you.

Once the HTprog Clone Adapter is activated for KT200, it is ready to use.

HTprog On Bench Programmer Support List.pdf (150K)

HTprog ECU Clone Support List.pdf (1.4M)

[obdiinet-blog]

CGDI Prog BMW vs. Autohex II

Some people said CGDI Prog BMW is a clone of VVDI2,  others said it is Autohex replica. Anyway,  it does work and  will get your money back. CGDI BMW vs. Autohex key programmer CGDI BMW: Programming CAS / FEM keys

Extraction ISN from DME

Equalization DME CAS  (DME/DDE CAS adjustment )

Autohex II: Programming CAS / FEM keys

Extraction ISN from DME

Equalization DME CAS (DME/DDE CAS adjustment…

[danielenigmatool]

💪🏻 EnigmaTool Software Update V4.2 ✅ Ready For Download In Enigma Manager ⭐️ #enigma #enigmatool #ferrari #honda #kawasaki #kia #kiak5 #mohave #kiamohave #toyota #toyotacamry #software #update #actualizacion #dashcoder #dc4 #magicmotorsportflex #hexprog #autohex #neox #vvdi #vvdiprog #eeprom #programming #obd2 #dash #speedometer #odometer #repair #reparacion (en Autoelectrónica MD) https://www.instagram.com/p/CiSGWUhDR--/?igshid=NGJjMDIxMWI=

[danielenigmatool]

Sunday funday 😁 Remember to keep your programming and diagnostic tools updated 🚀 It is essential in this job 👌🏻 Why? It’s very simple answer...It is because behind every diagnostic or programming tool there is a very big team of people working their ass off to provide you the latest ideas and solutions which you will not have without the latest update loaded to your tool 🤷🏼‍♂️ Don’t go to work unupdated 🤪 The result depends on it 🙋🏼‍♂️#enigmatool #dashcoder #dc4 #flex #magicmotorsport #magicmotorsportflex #xhorse #maxiecu #ecuservice #neox #microtronik #hextag #autohex #autohex2 #carprotool #cpt #flexbox #repro #ecu #tcu #tuning #chip #eeprom #data #tuner #chiptuning #priceless #quotes #pricelessknowledge #knowledge (en Autoelectrónica MD) https://www.instagram.com/p/CZWYEicA8-S/?utm_medium=tumblr

[weixy-electronics]

Autohex II HW4 and Full Functions  (👉HexTag is included)✅For BMW Technicians who are looking for a tool that can do everything possible in BMW cars✅Available in BMW from ISN read-write to key programming and BMW Ecu programming and coding

[weixy-electronics]

(Special Offer 35) DashCoder4 DC4 for Automotive Dashboard Mileage + AutoHex II Full Package

[weixy-electronics]

(Special Offer 40) 1PCS Full XPROG + 1PCS Autohex II Full Package

[weixy-electronics]

(Special Offer 39) 1PCS Full XPROG + 1PCS Autohex II Full Package + 1PCS Full Flex Mater

[weixy-electronics]

(Special Offer 36) DashCoder4 DC4 for Automotive Dashboard Mileage + AutoHex II Full Package + Full Flex Master + Full XPROG

[weixy-electronics]

(Special Offer 35) DashCoder4 DC4 for Automotive Dashboard Mileage + AutoHex II Full Package

[weixy-electronics]

(Special Offer 34) Full Flex Master + Autohex II Full package

[weixy-electronics]

(Special Offer 17) 1PCS Each Full Autohex II + FEM BDC + 6HP EGS + 8HP EGS + FEM BDC + MG1 MD1 + N13 N20 + CAS4 CAS4+ Test Platform Cable for BMW

[weixy-electronics]

BMW CAS4 & CAS4+ test platform cable for AutoHex II

[weixy-electronics]

BMW N13  N20  N55  B38 DME test platform cable specially designed to work with Autohex II