#foam block compression machine

[mattressmachinery]

Foam Block Compression Machine

Our foam block compression machine, meticulously designed to compress foam/foam blocks, offering a remarkable 95% volume reduction.

Compression: Efficiently compress foam blocks. Heat Seal: Utilize heat sealing technology for a secure seal.

[dekui-intelligent-equipment]

The Workflow of the Bed Core Production Line

The Bed Core Production Line is a complex and well – organized system that transforms raw materials into high – quality bed cores, which are the fundamental components for ensuring a comfortable sleep experience. Here is a detailed look at its workflow: Raw Material Preparation For Foam – based Bed Cores：High – density polyurethane foams are selected as the main material. These foams are sourced from trustworthy suppliers and then subjected to strict quality inspections. The received large – block raw foam materials need to be cut into appropriate sizes for subsequent processing steps. For Innerspring Bed Cores：High – carbon steel wires serve as the primary raw material. These wires first go through a straightening process to eliminate any bends or kinks. Then, they are coiled and formed into individual springs using specialized wire – forming machines. This shaping process requires precision to ensure each spring has the correct shape and strength. Foam Cutting and Shaping (if foam – based bed cores) Cutting Techniques：Precision foam cutting machines are utilized. Hot – wire cutting is a common method where an electrically heated wire is passed through the foam. The heat from the wire melts the foam along its path, allowing for efficient cutting of large sheets of foam into specific thicknesses. Another technique is water – jet cutting, which uses a high – pressure stream of water mixed with abrasive particles. This method enables the creation of complex shapes in the foam, which is especially useful for contoured bed cores that offer enhanced support and comfort. Spring Assembly (for Innerspring Bed Cores) Forming Spring Units：Individual springs are first arranged into rows. Then, they are interconnected using metal clips or wires to form a spring unit. There are different types of spring units. Pocket springs, for example, are individually wrapped in fabric pockets, which provides better motion isolation. Open – coil springs are connected in a more traditional grid – like pattern, offering a different level of support and durability. The choice of spring unit depends on the desired characteristics of the final bed core. Assembly and Bonding Hybrid Bed Cores：In the case of hybrid bed cores that combine foam and springs, the foam layers are carefully placed on top of the spring unit. To hold these components together, either adhesives or mechanical fasteners are used. High – strength adhesives are often preferred as they can create a strong and long – lasting bond between the foam and the spring unit. Some production lines employ automated bonding machines that can precisely apply the adhesive, ensuring consistent quality across all products. Finishing and Quality Control Inspection for Defects：Bed cores are thoroughly inspected for any visible defects. This includes checking for uneven surfaces, misaligned springs (in innerspring bed cores), or improper bonding. Pressure – testing machines are used to assess the durability and support of the bed core. For foam – based bed cores, compression tests are carried out to ensure the foam can maintain its shape and support during regular use. Packaging：Once the bed cores pass the quality control checks, they are wrapped in protective covers or fabric casings. This not only protects the bed core during transportation but also gives it a finished look. After packaging, the bed cores are ready to be distributed to furniture manufacturers or directly to the market.

[digitizingmill]

Puff Digitizing Explained for Stunning 3D Embroidery

Puff Digitizing Explained: Techniques, Tips, and Benefits for Stunning 3D Embroidery

Puff digitizing, also known as 3D embroidery digitizing, is a transformative technique that adds dimension and texture to embroidery designs. By using specialized methods and foam, puff digitizing elevates flat designs into eye-catching, raised embroidery. At DigitizingMill.com, we specialize in creating flawless puff digitized designs that make your logos and patterns stand out. In this article, we�ll break down the essentials of puff digitizing, answer common questions, and share valuable tips for achieving stunning results.

What is Puff Digitizing?

Puff digitizing is a process where foam is placed under the stitches during embroidery, creating a raised, 3D effect. This technique is commonly used for caps, jackets, and other apparel where bold, textured designs are desired.

Techniques for Puff Digitizing

Design Preparation: Not all designs are suitable for puff digitizing. Simple, bold elements such as block letters or shapes work best. Avoid intricate details or thin lines, as these can be difficult to achieve with foam.

Stitch Density Adjustment: Proper stitch density is crucial. Overly dense stitching can crush the foam, while sparse stitching may fail to hold the foam securely. A balance is essential for a clean, raised effect.

Underlay Stitches: Strategic underlay stitches provide a foundation for the top stitches, ensuring stability and a polished finish. The right underlay technique depends on the design and fabric.

Foam Selection: The choice of foam thickness and color plays a significant role in the outcome. Using foam that matches the thread color helps prevent visibility through the stitches.

Machine Settings: Adjusting thread tension, needle size, and speed is critical to avoid damaging the foam or the fabric. Testing settings on a sample piece is highly recommended.

Tips for Perfect Puff Embroidery

Use high-quality foam that compresses well and holds its shape.

Avoid overly complex designs to maintain clarity.

Trim excess foam carefully after embroidery to enhance the final look.

Test your design before mass production to identify and resolve any issues.

Benefits of Puff Digitizing

Visual Appeal: Puff embroidery adds a unique, professional touch to designs, making them stand out on any apparel.

Brand Recognition: For businesses, puff embroidery helps create bold, memorable logos that attract attention.

Versatility: Puff digitizing works well on various items, including hats, bags, and jackets, offering endless customization possibilities.

Premium Look: The raised texture of puff embroidery adds a luxurious feel to apparel, increasing its perceived value.

Frequently Asked Questions About Puff Digitizing

1. Can any design be used for puff digitizing?

Not all designs are suitable. Bold, simple elements work best. At DigitizingMill.com, we help optimize your designs for puff embroidery.

2. What materials work best for puff embroidery?

Caps, jackets, and thicker fabrics are ideal for puff embroidery. Stretchy or delicate fabrics may not support the foam properly.

3. How much does puff digitizing cost?

Costs vary based on design complexity. At DigitizingMill.com, we offer competitive rates without compromising quality.

4. How long does the process take?

Turnaround times depend on the design and order size. We ensure timely delivery without sacrificing precision.

5. Is puff embroidery durable?

Yes, with proper care, puff embroidery is highly durable and maintains its raised effect over time.

Why Choose DigitizingMill.com for Puff Digitizing?

At DigitizingMill.com, we bring years of expertise to the table, offering:

Precision digitizing tailored for puff embroidery.

Affordable pricing with fast turnaround times.

Dedicated customer support to guide you through the process.

[ninjasports]

Master Ninja System - Padded Obstacle Package

Padded Obstacle Package by Resilite

The Master Ninja System offers a fun and challenging obstacle course to help students stay engaged in the gym. Your students will feel like a real ninja warrior after conquering the Master Ninja System - then rearrange the obstacles for a brand new challenge! 

All of the obstacles included in the Master Ninja System are crafted with high-quality foam cores and are covered with heavy-duty 18-oz. double-coated vinyl fabric (available in your choice of 14 different colors).

Each Master Ninja System component features Hook-and-Loop tabs to securely fasten to Carpet-Bonded Foam. The Double-Sided Slanted Steps, Ninja Blocks, and the Ninja Stacked Vert Wall feature non-slip surfaces.

The Master Ninja System includes:

(2) Speed Bumps

(1) Set of Four Two-Sided Slanted Steps

(1) Set of Three Ninja Blocks

(1) Small Ninja Block

(1) Medium Ninja Block

(1) Large Ninja Block

(1) Two-Piece Ninja Trapezoid

(1) Ninja Bridge

(1) Ninja Stacked Vert Wall

(1) 24" Landing Mat

Available in your choice of 14 vinyl colors on all pieces of The Master Ninja System. However, one color only with online purchases. To mix colors, please contact the Ninja Sports Manufacturing office at 440-552-4237.

Caution: Resilite Ninja products are designed to be used in conjunction with Carpet-Bonded Foam (CBF). The Hook fastener on the bottom of each unit is intended to attach securely to the carpeted surface of the CBF. Use caution as older CBF surfaces can be worn or compressed to the point that it will not allow he Hook attachment to securely hold the unit in place. ALWAYS CHECK TO ENSURE THE HOOK ATTACHMENT IS SECURELY ATTACHED TO CARPET BEFORE USE; DO NOT USE UNDER ANY CIRCUMSTANCES IF UNIT CAN BE DISLODGED FROM CARPET-BONDED FOAM.

SHIPPING: Due to the size of these items, they must ship motor freight. There are many variables when shipping via motor freight, so please contact our office for further information so we may calculate actual freight costs.

IF you choose to order online, all freight orders have a standard shipping fee. If your location deems shipping cost more than the fee included in your payment online, we will notify you via email within 24 hours and include a payable invoice for the remainder of the shipping cost. If you do not want to pay the additional shipping cost then you will have the opportunity at that point to cancel your order.

For any questions about shipping, contact our office at: Email: team_ninjas@customdesigncrafts.com Phone: 440-552-4237

Agreement:

Custom Design Crafts, is not responsible for injuries the purchaser may incur due to misuse, improper installation, or falls that may happen while performing the required exercise. Upon purchasing this product the purchaser agree to not hold Custom Design Crafts, its Employees, affiliates or its owners responsible for damages. 

About Resilite Products:

Ninja Sports Manufacturing is an official distributor of Resilite Products.

At Resilite, we take pride in handcrafting each and every one of our mats. Unlike mass-produced mats created by machines, our skilled team puts their heart and soul into meticulously making each mat with the utmost care and attention to detail. We believe that this personal touch results in a product that is truly one-of-a-kind, carrying a sense of authenticity and craftsmanship.

All of our mats (other than our in-stock products) are made-to-order. For our folding mats, landing mats, and other sewn/vinyl products, our current lead times are 6-10 weeks. Our home-use wrestling mats are 8-10 weeks, while our larger wrestling mats are anywhere from 26-30 weeks, depending on the product.

[greenmaxsd]

The public is well aware of the environmental preservation project that recycles EPP foam using an EPP compactor

Plastic pollution has emerged as one of the main issues affecting the environment worldwide in today's society. Expandable polypropylene (EPP) foam is a lightweight, high-strength, impact-resistant plastic material that finds extensive use in transportation, packaging, and other areas. But as more and more EPP foam products are used, wasted EPP foam is starting to rank among the major causes of pollution in the environment. The recycling of EPP foam using EPP briquetting machines has become a crucial environmental protection measure in the fight against this issue.

An apparatus designed specifically for recycling spent EPP foam is the EPP compactor. Waste EPP foam can be compacted into small blocks for easier transportation, storage, and reuse by using the GREENMAX EPP compactor. This apparatus has a compression ratio of 50:1. By using this compressed EPP material to make new plastic products, a closed-loop cycle of waste resource utilization can be achieved.

Utilizing an EPP compactor to recycle EPP foam has several benefits. It is important to note that using the GREENMAX EPP compactor is easy and doesn't require any specific training. Additionally, when used properly, this equipment can efficiently assure worker safety and is quite safe.

Apart from the aforementioned benefits, recycling EPP foam with an EPP compactor also lessens adverse environmental effects. Products made of EPP foam take up a lot of room in landfills, take a long time to break down, and waste land resources.

[foamcut]

EPS foam waste can be hot melted ?

When exposed to high temperatures, EPS foam undergoes a process called thermal decomposition, which can release toxic fumes and pose health and safety risks. These fumes can be harmful when inhaled and can also contribute to environmental pollution.

Instead of hot melting, EPS foam waste can be recycled through a process called mechanical recycling. In mechanical recycling, the foam waste is typically compressed and compacted into denser blocks or pellets, which can then be used as raw materials for various applications. Many recycling centers and specialized facilities accept EPS foam waste for mechanical recycling.

It's important to note that the availability and accessibility of EPS foam recycling facilities may vary depending on your location. It is recommended to check with local recycling centers or waste management facilities to inquire about specific recycling options for EPS foam in your area.

By recycling EPS foam waste through EPS foam hot melting machine, you can help reduce the environmental impact and promote the sustainable management of this material.

[murrumbaautocareau]

Brake System Inspection

When a customer complains of noise or vibration or smells a burning smell when braking, a brake system inspection is the first step. This involves inspecting the brake pedal, brake fluid and brake lines & hoses. The brake assemblies (disc and drum) and parking brake are also inspected.

The front and rear brake assemblies are removed to get a good view of the pads and the caliper. Brake rotors must be machined smooth when pads are replaced. To know more about Brake System Inspection Kallangur, visit the Murrumba Auto Care website or call 732856933.

The brake pedal is the driver’s physical connection to the braking system and provides feedback on how well the system is operating. Spongy, mushy or squishy brake pedals can indicate a variety of concerns, including air trapped in the hydraulic system, excessive pedal travel or other mechanical problems.

A spongy pedal can also be caused by a loose master cylinder push rod or a worn pedal bushing. Your mechanic can check for this problem by blocking the master cylinder ports and then depressing the pedal. This test will help determine if the problem is in the pedal mechanism or if it’s an internal symptom like a weak return spring or maladjusted push rod.

Regular brake inspections keep the components that make up the braking system in optimal working condition, ensuring maximum stopping power and helping to prevent accidents and improve overall road safety. If you’re in the Kallangur, Petrie, North Lakes, Lawnton or Murrumba Downs area and need a brake inspection, contact Dog Tyred today!

Your brake system uses hydraulic fluid to amplify the force you apply on your vehicle’s brake pedal to actuate the rotors and stop your car. But this important liquid can get contaminated or depleted over time.

Brake fluid is hygroscopic, meaning it will absorb moisture from the air over time. The moisture decreases the fluid’s boiling point, which can lead to a spongy brake pedal.

The Department of Transportation (DOT) regulates the specifications of all brake fluids and their boiling points. Most vehicles use DOT 3, which is clear to amber in color and has a lower boiling point than DOT 4 and DOT 5.1. The higher boiling points of DOT 4 and DOT 5.1 cannot be mixed with DOT 3 because they will cause the fluid to foam.

In addition to ensuring your brake pads are in good condition, you’ll want to make sure the lines that carry brake fluid from the master cylinder to your wheel brakes are working well. These steel lines are subject to the same stresses as the rest of your braking system and should be inspected regularly.

While a cracked brake hose may seem like a minor problem, it could quickly lead to the collapse of the entire line and loss of pressure. Visually inspect the hoses for cracks and other damage. You can also try pumping the brake pedal and flexing the hose to see how it responds. A hose that changes shape should be replaced.

Whether your vehicle uses disc brakes or drum brakes, the brake assemblies must be checked. The three main parts of the brake assembly are the brake pads, rotors and brake calipers. When you press the brake pedal, the hydraulic fluid forces a piston into each brake caliper, which compresses the brake shoes or brake pads against the rotor to slow and stop your wheels and vehicle.

The rotors must be inspected for excessive wear so that metal isn’t rubbing against metal. The brake pads must be inspected for proper thickness to ensure they create sufficient friction to slow and stop your wheel.

Brake lines and hoses are also important to check. Rubber hoses can wear over time and brake lines may become subject to corrosion or other damage.

Although it’s not a part of your vehicle’s primary brake system, the parking brake is important to overall vehicle safety. The parking brake uses levers and cables to hold the vehicle stationary while parked, or to supplement the primary braking system in certain driving situations.

The emergency (parking) brake can be engaged with a handle, lever, pedal, or push button. The simplest way to maintain your parking brake is by using it regularly. Regular use keeps the cables from becoming corroded or stuck.

The braking system is a crucial component of overall vehicle safety. Regular brake inspections will keep your car or truck running safely and efficiently. Schedule an appointment for a brake inspection today! We serve Baldwinsville, NY and the surrounding areas. We look forward to serving you! To know more about Brake System Inspection Kallangur, visit the Murrumba Auto Care website or call 732856933.

[rediscoverhearing]

Protect Your Hearing With Custom Earplugs Perth

Earplugs are an essential part of your safety gear if you work with machinery or play live music. The noises produced can be dangerous to your hearing and if not protected correctly could lead to irreversible damage. However, it is possible to protect your hearing while maintaining the ability to hear important sounds like speech and music. This is where custom earplugs come in, as they are made to fit the specific shape of your ear canal. These earplugs are an investment but are a lot more cost efficient than using disposable earplugs which don’t offer a perfect fit and leave slit leaks in your ears that allow the sound waves to pass through and not reduce the dangerous levels of noise.

Generally, earplugs are a foam cylinder that is inserted into the ear canal and then compressed. The earplugs are then moulded into the shape of your ear so that it blocks out most of the external noise. This is a great option for industrial workers as it allows them to maintain their balance, while still protecting their hearing from loud sounds such as machines or music concerts. However, they are not ideal for music lovers or those who want to hear the details in their audio. They can be uncomfortable and if not properly inserted are not designed to block out all the sounds but only some, leaving the listener to struggle with a lack of clarity and muddy bass. This is why a custom fitted pair of earplugs can make a huge difference and are an effective option for anyone who needs to protect their hearing.

Custom earplugs are fitted by a qualified Audiologist to ensure that they are comfortable and effectively block out the noise you want to avoid. They are usually made out of soft silicone that is both flexible and hard wearing, so they can withstand lots of use and last 3-5 years depending on the care that they receive. Keeping them clean and in the right storage place will also extend their life.

The first step in getting a set of Custom Earplugs Perth is to book an appointment with your Audiologist. They will examine your ear canal and eardrum to make sure they are healthy and free of wax. A small sponge attached to a string is then inserted into the ear to prevent the impression material from entering too deep and possibly damaging the eardrum. A piece of soft putty is then injected into the ear canal to create a mold and as it hardens will capture the exact shape of your ear. The earplugs are then sent off to the manufacturer for manufacturing and can be ready in 2 weeks.

A range of different styles of earplugs are available, so your Audiologist will help you choose the best option for your lifestyle or work environment. These include customised industrial earplugs, music earplugs and swimming earplugs. They are available in a variety of colours and styles to suit your preference.

Rediscover Hearing the Joy of Hearing with Your local & WA owned Independent Audiologists. Your local Hearing Aid and Tinnitus Specialists. Combined experience of 38 years.

[intcorecycling]

♻️ Compressing EPS is only the first step. But do you know who will buy your foam blocks after that?

With GREENMAX, you’re not just buying a machine — you’re getting a reliable EPS foam block buy-back service that closes the loop on your Styrofoam recycling.

✅ Monthly stable demand ✅ Priority support for GREENMAX compactor users ✅ Transparent market price updates ✅ Global buyer network to expand your sales channels

Turn your foam waste into profit — sustainably. 🌍💰

[isshebreathing]

Sharing my first resus story, please be kind:

Bringing up our child pt: 1

We sat together on the sofa trying to avoid the heat. Both sprawled out in nothing but a tank top and underwear, her bulging belly mounted in the center of her body like a rapidly growing hill to climb.

I was the one who wanted to give birth to a child, she would have been perfectly fine with adoption, but I was so desperate to experience a pregnancy my weak heart could never support that she agreed to carry our child.

Pregnancy had been awful for Lizzy, I knew it but she never complained, she would never complain because she loved me that much. She sat up suddenly and asked for antacids, it wasn’t uncommon so we’d started keeping them all around the house like little candy jars. She chews two and sits up to get more comfortable, despite siting directly in front of the air conditioner and a fan I notice beads of sweat forming on her forehead. These hot flashes had been happening at night, she’d wake up covered in sweat, make her way to the bathroom and take a cold shower, then make her way back, to bed I’d sit with her in the bathroom and offer to get her ice or a cold washcloth but she always declined, “just need to wash the sweat off” she’d say.

She was usually so reluctant to accept help, which was why I was surprised when she asked me to get her a cold washcloth and some ice.

As soon as I got back panic began to rise in my throat, she had shifted from the sofa to the floor on all fours, panting as her body started to drip with sweat. “Call for help,” she said weakly, “I can’t get up.”

“911 can you please give me your address?”

“1217 east main st, my wife is pregnant and something is wrong, please send someone to help, she looks really bad, she can’t get up and she’s dripping with sweat.”

“Okay ma’am I need you to stay calm, is you wife breathing?”

“Yes she is, she’s on the floor on her hands and knees, she can’t get up, she’s breathing really heavily”

Lizzy looks up at me with pleading in her eyes and doesn’t try to reassure me, I know something must really be wrong.

“Ma’am I need you to give me this info okay”

My mind snaps back into the phone call as I realize the dispatcher is trying to get information from me.

“How far along is she?”

“Six months, she’s due in September, she hasn’t had anything like this happen before, please hurry, I have a heart condition and I cannot help her up”

“Ma’am they are coming as fast as they can…”

I panic further as Lizzy’s eyes roll back in her head and she face plants into the floor, letting out a horrific groan and violently seizing

“Oh my god send help now she’s having a seizure”

“Okay ma’am you’re going to have to be calm to help her okay,”

“Don’t tell me go calm down bitch, my wife and child are seizing uncontrollably on the floor, I will freak out as much as I can thank you.” I think to myself.

“Is she still seizing?”

“Yes.” I snap back, “Oh fuck how long has it been”

“Okay I need you to roll her on her side and make sure there’s nothing in her mouth that she can choke on.”

I grab her back under her bloated belly and heave her onto her left side, she continues shaking and gasping in a horrific noise, I pry her mouth open and sweep my finger through it as a sickeningly pale foam gorges out.

The seizing slows but she continues to gasp horrible breaths, desperate for air. Her body goes limp as she desperately tries to pull air into her lungs one last time. Her eyes glaze over as she stares off into something that I cannot see.

I push my two fingers to the side of her throat to confirm my worst fear, her heart has stopped.

“Fuck she’s in cardiac arrest, send someone now!” I scream to the dispatcher as I rush to the front closet to get the “just in case” kit that Lizzy put there after one of my episodes. “Unlock the front door” a large note says on top, reminding me to open the house for the paramedics that I pray would be here soon. A wave of appreciation for my wife’s continuing fear that I would suddenly drop dead washed over me.

I rush back to her and I see her lying there sickingly still and with a blank stare as her body rapidly turns a horrifying gray/blue color.

“Ma’am can you hear me? What is happening now?”

I realize I haven’t responded to the dispatcher since screaming about Lizzy going into cardiac arrest.

“She’s in cardiac arrest, we have a defibrillator and a breathing kit, I have a very weak heart, I need help now”

“Ma’am they’re coming as fast as they safely can, what is happening now”

I flip Lizzy on her back and try to stay calm as the mound of her belly turns the same sickingly gray/blue color as the rest of her body. I rip off her top and have a bashful moment as her milk swollen breasts flop off to the sides, distracted for a moment by how beautiful my wife’s full and soft body was. I put one AED pad in between her breasts and lifting her up gently to place one between her shoulder blades. Putting one on her side like is usually advised would risk the shock jumping over to the baby and forcing the fetal heart rate out of control. The shock had to go directly into Lizzy’s heart to try and convince it to start.

“Analyzing rhythm, do not touch patient.”

The wait seems like hours before it says “shock advised”

I hesitate before pushing the flashing button, a shock goes through Lizzy jolting her limbs in an unnatural form as the mound in her belly shakes.

“Check pulse, if no pulse continue CPR”

I stick my fingers below her chin and feel nothing.

“Fuck please send someone now, I have a very weak heart I can’t do much CPR”

The dispatcher replies but I don’t comprehend what she says as I lock both of my hands over her chest and push down as hard and as fast as my weak and pathetic body will allow me to.

“One and two and three and four…” I count to myself, it’s the only thing from my YMCA CPR class that has stuck. I get to thirty and I swipe my finger through her mouth again removing more yellowish foam that I now notice has red streaks in it.

I tilt her head back and pinch her nose shut, I can feel my heart weakly pounding as I cover her mouth with mine and weakly breathing into her as her chest rises, I repeat the action again, then frantically comtinue compressions “one and two and three and four and…”

The defibrillator pipes up with its computerized voice again, “analyzing rhythm, do not touch patient.” I feel weirdly comforted that I have this sentient machine by my side.

Another agonizing few seconds pass before the machine says “shock advised” as the machine is powering up I look in the orange bag my wife diligently packed never expecting it to be used to sustain her own life, I see an ambu bag attached to a mouthpiece and another little bag with a hose attached and a note that says “O2 concentrator” I connect the tube to my oxygen concentrator and turn it on I hear the loud air intake noise as I push “shock” again.

The shock is stronger this time, Lizzy’s body contorts again in an unnatural surge. I push my fingers into her corroded again and feel nothing. I stick the plastic piece into her mouth to keep her tongue out of the way and slip it into the mask, and then squeeze the bag as two deep oxygenated breaths make her chest rise more than my pathetic weak lungs could ever imagine.

I lock my hands in the center of her chest again and start compressions “one and two and three and four and…” I can feel my heart start to murmur and skip from the strain.”

“Somebody please help” I scream in desperation, the thought of losing both my wife and child slips through my mind as I pump her chest harder, fully prepared to kill myself in order to save them.

My head starts to spin as I fill her lungs with another breath from the ambu bag. There’s a ringing in my ears as I start my weak compressions again “one and two and three and four and…” I feel my body weaken knowing it will never be enough. “I’m so sorry Lizzy” I thought as I failed to keep her heart beating for either her or our child.

I feel a hand on my shoulder pull me back as a hand puts an oxygen mask over my face as I gasp to fill my useless lungs with air. Someone shoves a nitroglycerin tablet into my mouth and slips a pulse ox meter on my finger.

“That’s it honey, deep breaths, just like that” they say.

I weakly try to remove the oxygen mask and choke out the words “no, her, baby”

“They’re on it” the woman moves aside to reveal three paramedics surrounding Lizzy and working in a perfectly choreographed dance.

One woman pounds on Lizzy’s chest so hard her breasts and belly cave in as a sicking “huf huf huf” sound escapes her mouth with each compression.

Another man kneels buy her feet with a stethoscope to her belly.

“We have a fetal heartbeat, holding steady at about 100, baby’s very stressed though.

I am suddenly terrified for the life of my child. “Please stay alive baby,” I thought, “I will give my weakly beating heart to keep you alive”

I continue to suck up oxygen through the mask as I feel my chest start to open and my heart return to a normal pace. I notice Lizzy’s feet bending inward with each intense compression as they rock her whole body. I see another medic tilt Lizzy’s head back and slip a metal hook into it to force her jaw open and insert a plastic tube. She suctions up the blood and foam that had been blocking Lizzy’s throat, then hooked up an ambu bag and forced precious air into her lungs.

“STAND CLEAR” someone yells and I see them blast another shock through her heart. This one was stronger than the others and her body jolted and then hit the ground flopping uselessly like a rag doll.

I watch in a haze until the words “we have a sinus rhythm, let’s pack up for transport.” snap me back into reality.

The paramedic kneeling next to me says”we have your wife and baby back but they’re still in a lot of danger, we are going to take them to the hospital now. You are going to follow them, your heart rate is very high and your pulse ox is very low.

[defiblover27]

Powder

Here is a new story which was inspired by another user. Enjoy!

----------------------------------------------------------------------------

Jasmine is a 21 year old female who was always considered to be the prettiest girl in school.  With so much attention on her she started to do things to increase her appearance including getting tattoos.  She had long dark brown hair and long nails.  She was skinny with large firm breasts.  With the added attention that she got she began to become stressed and concerned about her appearance and it began to affect her mental health.  To cope with this Jasmine started doing cocaine.  For a while it was just here and there to have fun at a party but it gradually increased to a daily occurrence.  One night while she was alone in her apartment she shuffled through her drawers to find the cocaine she had hid.  Upon finding the bag she spread it across the top of the dresser and used her drivers license to form it into lines.  Using a rolled up dollar bill she snorted five lines after a long day.  The affects started to kick in but it had felt different from before.  She got light headed and began to struggle to breath.  She poured her purse out on her bed and searched through her phone.  Dialing 911 she grabbed onto her chest and collapsed onto the bed.   The operator answered “911 what's your emergency?” Jasmine was gasping with her face shoved into the bed she struggled to get the words out “...help...me”.  The operator responded “What's the location of your emergency? Do you need medical attention?”  Jasmine responded “... yes..”  Jasmine let out a sigh as her last breath exited her body.  Her eyes were wide open as her face was buried in the bed.  “Hello?  Are you there?”  the operator responded.  They were able to trace the call to the apartment building and it took another few minutes to find out which apartment she lived in.  The apartment manager let them in with a master key and waited with one of the police officers outside the apartment.  

The paramedics entered “EMS is anybody in here?” they made their way to the bedroom and found Jasmine spread across the bed with her face buried.  They lifted her off the bed and laid her on the ground.  Her eyes were wide open and stared at the ceiling.  One of the paramedics placed to fingers on her neck.  Finding no pulse he centered his hands between her breasts and began compressions.  The other paramedic grabbed the ambu bag and began given her much needed breaths.  They snipped away her baggy hoodie and black bra underneath to attach electrodes to her chest.  As the monitor whined to life it showed that she was in v-fib so the placed the AED pads on her bare chest.  One between her large breasts and the other on the lower side of her left chest.  Charging the unit to 200 they backed away and shocked her.  The shock coursed through her body and made her breasts shake.  With no change CPR was resumed while the defib unit was recharged to 300.  The second shock coursed through her body as her head snapped back and returned to its original position.  With no change they charged the paddles to 360 and continued compressing her chest.  In a matter of moments the defib was ready.  They backed from her semi exposed body and pressed the shock button.  The increased electricity coursed through her body as her chest came off the floor of her bedroom and came crashing back down.  Her breasts shook with the collision.  After a moment the monitors began jumping up and down as she returned to normal sinus.  They scooped her up and rushed her into the ambulance.  As they sped away one of the police officers remained in the back.  As they pulled away Jasmine began showing signs of inadequate breaths so the paramedic decided to intubate.  They metal blade was slid into her mouth as her head was tilted back.  She moved the tube into place in her throat before securing it with a blue tube holder.  They also started an IV in her left arm and hung a bag of fluids.  Jasmine remained stable for the rest of the ride.  

As they wheeled her into the trauma room they gave the info.  “21 year old Jasmine according to ID found on scene.  Found with no pulse after 911 call.  Resuscitated for six minutes, shocked three times and returned to normal sinus.  Been stable since,  Intubated with a 7.0 ET tube.  Apparent drug overdose”  They moved her over to the trauma bed as a nurse snipped away her sweats and black panties.  She now laid completely nude under the lights as the team began their checks.  A second IV was started in her right arm.  Her fully nude body was covered in wires and tubes as the team did everything they could to stabilize her.  Not knowing what it was that caused the drug overdose they had very little that they could do.  They drew some blood and sent it to the lab to see what exactly was in her body.  While they were waiting for the results to come back Jasmine began to seize on the bed.  Her body thrashed around on the bed as they pushed drugs to counter the seizure.  Her airway began to become blocked with fluid as foam came out of her mouth.  They tried to suction it out.  After her seizure stopped so did her heart as she went into v-fib.  CPR was started as a male nurse centered his hands between her large breasts.  With each compression her entire body shook on the bed.  After a few moments they charged the paddles to 360.  They spread gel on each one before placing them on her bare chest.  Pressing the shock button she jumped into the air before crashing back down.  With no change cpr was resumed and the paddles were recharged.  In a moments notice the cold metal was on her chest again.  The shock coursed through her body.  Her shoulders and feet scrunched up before releasing again.  After the second shock Jasmine flatlined.  CPR was initiated once again.  The gel glistened on her bare chest as it was compressed.  A round of epi was given while fluids were pushed.  During CPR her airway became blocked again this time with a trace amount of blood in it.  They suctioned it out and reattached the bag to continue to provide breaths and compress her chest.  It took three minutes for her heart to convert back to v-fib.  They charged the paddles to 360 again and spread another large amount of gel on the paddles.  Placing them on her chest they shocked Jasmine as her head snapped back and her arms fell off the side of the bed.  With no change the paddles were charged again.  With each compression her legs swayed back and forth and her arms bounced hanging off the bed.  Again the paddles were placed on her chest and she was shocked.  Her chest heaved into the air before crashing back down.  Her breasts shook from side to side.  This time Jasmine once again flatlined as CPR was resumed.  Her down time now crossed the ten minute mark of her second full cardiac arrest.  The doctor slid open her eyes with his fingertips and shined his penlight into them.  Her dark brown eyes stared back at him and barely responded to the light.  Another round of drugs were being pushed through her body as her chest caved in rhythmically.  Her large breasts shook side to side with each compression.  After three more minutes her heart quivered in her chest as the monitors showed v-fib.  The paddles were taken off the station.  A new set of gel was spread across them.  Placing one between her breasts and the other below her left breast the shock button was pushed.  Her body shook violently on the bed before going still.  With no response CPR was resumed for a short time while the defib recharged.  In a moment the cold metal paddles were back on her chest.  Her chest jumped and her head lolled to the side after the shock.  It was an eerie moment as her eyes stared open at the doctor.  Her head was repositioned so that ventilations would carry down her wind pipe correctly.  They stared at the monitor as it once again showed asystole.  As they looked back at Jasmine a dark stream of blood trickled out of her nose.  They resumed CPR for another three minutes.  At the eighteen minute mark of her code an ultrasound was brought next to the bed.  The doctor took it in his hand a put a sliver of gel on it.  Moving it directly above her heart he noticed on the screen there was no cardiac activity.  Shining the light in her eyes again they were fixed and dilated as they stared at the ceiling.  “Time of death 1:37 am” the doctor announced.  Two nurses stayed back and disconnected the leads, turned off the machine, disconnected the ambu bag, cleaned up her body slightly.  Finally they placed a toe tag on her right foot and draped a white sheet over her naked body.

[dolldepository]

1/3 furniture for 3D printing

It was created by SorrowBJD and uploaded to the archive by the same person. Thank you!

Please, refer to the reference images in every zip file before printing!

Storage bin

Vinyl record player

VR Headset

Arcade machine riser

Industrial shelf (has some non-3d printed elements)

Backpack frame

Sofa (structure, will require you to make the soft parts-eg. with fabric-covered foam)

Turntable

Cinder block

Mini IKEA display case

Gridwall

Work light

Ammo box

Scroll down and click on the “ZIP“ on the right side to get a compressed file. It contains all credits and reference images. File format is STL.

You can reduce the shapes down to 75% to make it approximately a 1/4 doll prop, or to 50% to turn it to a 1/6 doll size DISCLAIMER: It might not always work, I’ve tried it with several items on thingiverse and so far so good, but this might not always be the case)

[mallowyu]

Indiana Department of Environmental Management’s (IDEM) Recycling Market Development Program (RMDP) has awarded $1 million in grant funding to recycling projects, which will increase the recycling of roadside recyclable materials, such as EPS foam, by nearly 6700 tons per year. Obviously, people pay more and more attention to EPS recycling, and many measures have been taken. GREENMAX has also designed foam densifier, which is also responsible for EPS recycling.

For enterprises, if there are few Styrofoam scraps recyclers locally, congratulations! Styrofoam recycling is a great business opportunity for you. First of all, you need to invest in professional foam recycling machine, compressed foam is a kind of renewable resource which has a large demand, and the selling price is more than twice higher than the original. You can sell it to local recyclers and manufacturers, or export it. recycled foam blocks are usually used in the production of picture frames, skirting boards and other foam products, which are in great demand and widely used.

After the design of foam densifier, GREENMAX recycling has not stopped and is still improving it. First of all, in order to achieve the appropriate comminution effect, GREENMAX adopts the structure of double cutter plus dynamic fixed cutter rung to ensure that the comminution size is the best compression size of our screw. Apart from this the screw is divided into sections: the screw is changed from fine to thick; the screw cabinet is changed from large to small, and the outlet is conical to ensure that the material can be pushed out in time after the material is thoroughly melted.

[ninjasports]

Master Ninja System - Padded Obstacle Package

Padded Obstacle Package by Resilite

The Master Ninja System offers a fun and challenging obstacle course to help students stay engaged in the gym. Your students will feel like a real ninja warrior after conquering the Master Ninja System - then rearrange the obstacles for a brand new challenge! 

All of the obstacles included in the Master Ninja System are crafted with high-quality foam cores and are covered with heavy-duty 18-oz. double-coated vinyl fabric (available in your choice of 14 different colors).

Each Master Ninja System component features Hook-and-Loop tabs to securely fasten to Carpet-Bonded Foam. The Double-Sided Slanted Steps, Ninja Blocks, and the Ninja Stacked Vert Wall feature non-slip surfaces.

The Master Ninja System includes:

(2) Speed Bumps

(1) Set of Four Two-Sided Slanted Steps

(1) Set of Three Ninja Blocks

(1) Small Ninja Block

(1) Medium Ninja Block

(1) Large Ninja Block

(1) Two-Piece Ninja Trapezoid

(1) Ninja Bridge

(1) Ninja Stacked Vert Wall

(1) 24" Landing Mat

Available in your choice of 14 vinyl colors on all pieces of The Master Ninja System. However, one color only with online purchases. To mix colors, please contact the Ninja Sports Manufacturing office at 440-552-4237.

Caution: Resilite Ninja products are designed to be used in conjunction with Carpet-Bonded Foam (CBF). The Hook fastener on the bottom of each unit is intended to attach securely to the carpeted surface of the CBF. Use caution as older CBF surfaces can be worn or compressed to the point that it will not allow he Hook attachment to securely hold the unit in place. ALWAYS CHECK TO ENSURE THE HOOK ATTACHMENT IS SECURELY ATTACHED TO CARPET BEFORE USE; DO NOT USE UNDER ANY CIRCUMSTANCES IF UNIT CAN BE DISLODGED FROM CARPET-BONDED FOAM.

SHIPPING: Due to the size of these items, they must ship motor freight. There are many variables when shipping via motor freight, so please contact our office for further information so we may calculate actual freight costs.

IF you choose to order online, all freight orders have a standard shipping fee. If your location deems shipping cost more than the fee included in your payment online, we will notify you via email within 24 hours and include a payable invoice for the remainder of the shipping cost. If you do not want to pay the additional shipping cost then you will have the opportunity at that point to cancel your order.

For any questions about shipping, contact our office at: Email: team_ninjas@customdesigncrafts.com Phone: 440-552-4237

Agreement:

Custom Design Crafts, is not responsible for injuries the purchaser may incur due to misuse, improper installation, or falls that may happen while performing the required exercise. Upon purchasing this product the purchaser agree to not hold Custom Design Crafts, its Employees, affiliates or its owners responsible for damages. 

About Resilite Products:

Ninja Sports Manufacturing is an official distributor of Resilite Products.

At Resilite, we take pride in handcrafting each and every one of our mats. Unlike mass-produced mats created by machines, our skilled team puts their heart and soul into meticulously making each mat with the utmost care and attention to detail. We believe that this personal touch results in a product that is truly one-of-a-kind, carrying a sense of authenticity and craftsmanship.

All of our mats (other than our in-stock products) are made-to-order. For our folding mats, landing mats, and other sewn/vinyl products, our current lead times are 6-10 weeks. Our home-use wrestling mats are 8-10 weeks, while our larger wrestling mats are anywhere from 26-30 weeks, depending on the product.

[greenmaxsd]

EPS foam recycling machines can be actively used to recycle, which successfully prevents the production of microplastics.

A decade ago, a discovery of microplastics had been made.Their goal was to identify a microbe that had evolved a simple strategy for attacking the surface of the plastic. But these bacteria appeared to be doing far more than that; they were breaking down plastic entirely and converting it into basic nutrition. Although this idea did not exist at the time, it does in reality have some connection to microplastics. Indeed, plastics have the potential to introduce microorganisms into the ecosystem. As a result, recycling plastics—in particular, recycling EPS foam plastics—has progressively acquired traction and public awareness.

Regarding this, GREENMAX is able to offer an assortment of EPS foam recycling equipment. The issue of microplastic pollution can only be effectively resolved by actually recycling EPS foam. Regrettably, there is still too little done to recycle EPS foam. There are still a lot of plastics that are not properly recycled and returned to the environment, as evidenced by the discovery of EPS microplastics in baby poop and even Antarctic microbes in recent years. In actuality, recycling EPS foam is made incredibly easy by the GREENMAX EPS foam recycling machine.

The primary function of the EPS foam recycling machine that GREENMAX currently designs and produces is to compress EPS and remove air to create dense blocks of EPS. The low recycling rate of EPS is a result of the widespread belief that recycling EPS is ridiculous due to its vast mass and light weight, as well as the high cost of recycling, which is mostly used for transportation expenses. Instead, utilize GREENMAX. This significant transportation issue can be resolved by the EPS compactor. EPS can be compressed to 1/90 to 1/50 of its original volume using GREENMAX recycling machinery.

Actively using the EPS foam recycling machine for recycling can effectively avoid the generation of microplastics. GREENMAX hopes to recycle with you!