#ftb macro

[uroboros-if]

Fade to Black Macro

Demo

I have finally turned my fade to black transitions into a somewhat easy to use macro!! :) I am not sure if this has been done before!

Customizable fade times

Built to be compatible with backward and forward buttons (mostly!)

Works across all screen sizes

Note: This is only for SugarCube.

Setup

Copy and paste this Pastebin to your Story JavaScript.

Copy and paste this Pastebin to your Story Stylesheet.

Make a new passage titled exactly as "black_fade". Add the passage tag, "black-fade". Inside, write <div id="black"></div>. Super important! Copy below identically.

After this, your installment of the macro should be complete!

Usage

In the passages where you will be fading from and where you will be fading to, tag it as "passage-fade". For example, I want to transition from "p1" to "p2" with a black fade. Thus, both p1 and p2 should have the tag.

In the passage where you will be fading from, write <<fadestart>>.

Use the <<link>> macro to link to your destination. Inside the link macro, use <<passagefade "[passage name]" [fade time]>> where [passage name] is the passage you want to go to, and fade time is how long the black fade will be in miliseconds. (1000ms = 1s). However, do NOT put the passage you will be going to in the <> macro itself. See below:

Here, I want to go to the passage "p2". Do NOT write <<link "Next passage" "p2">><</link>>. Do not provide the destination passage in the link macro itself. The macro <<passagefade>> will handle it for you if you specify the passage name in the first argument.

Once you do all this, you should be able to sit back and happily use it as you please!

Problems?

Make sure you have the passage "black_fade" titled exactly like that.

Also make sure it has <div id="black"></div> and nothing more!

Make sure "black_fade" is tagged with "black-fade".

Make sure you used <<fadestart>> in the passage you are transitioning from.

Make sure you are correctly using the macro <<passagefade>>. You specify time in miliseconds; it should not have "ms" or "s" included in the argument. It should just be the number (e.g. 4000 for 4 seconds).

Make sure the passages you are fading from and to are tagged with "passage-fade".

There may be CSS/HTML that is interfering with the look of the fade!

There may be other JavaScript code interering with the current code.

If you are having problems, please let me take a look at your Stylesheet or let me know what template you are using! However, I highly recommend looking at the playable and downloadable demo.

(This macro is free to use, free to copy for all commercial and non-commercial projects with no additional fees. Credit is appreciated!)

[paincorpsrarefinds]

CANON FTb QL FILM CAMERA BODY 35MM BLACK WORKING with macro lens

CAMERA DEALS: Seller: msm76179 (100.0% positive feedback) Location: US Condition: Used Price: 49.99 USD Shipping cost: Free Buy It Now https://www.ebay.com/itm/266202983782?hash=item3dfaef2d66%3Ag%3Au7sAAOSw3bdkLLDN&mkevt=1&mkcid=1&mkrid=711-53200-19255-0&campid=5338779481&customid=&toolid=10049&utm_source=dlvr.it&utm_medium=tumblr

[mislovery-blog]

EXFO FTB-300 SM OTDR FTB-7223B FTB-3922 Multitest

Welcome to a Biomedical Battery specialist of the EXFO Battery

With the rapid evolution of communication technologies, testing requirements have become more complex and diversified. Fully adapted to this new reality, the FTB-300 Universal Test System (UTS) provides a simple, yet efficient,way to perform multiple advanced test operations in outside plant installation,maintenance, and troubleshooting.

The unique FTB-300 UTS combines a series of high-performance test modules in a powerful platform with battery such as EXFO FTB-1 Battery, EXFO XW-EX009 Battery, EXFO LO4D318A Battery, EXFO AXS-100 Battery, EXFO AXS-110 Battery, EXFO XW-EX003 Battery, Acterna ANT-5 Battery, Acterna MT9090 Battery, Acterna MT9090A Battery, Acterna 909815B Battery, Acterna G0202A Battery, Acterna PT01496 Battery. The test set simultaneously houses up to three field-interchangeable modules. Its PC architecture runs the Windows 95 operating system as well as a complete test application software to provide maximum processing capability right where you need it the most: in the field.

The power of a UTS lies in its capability to evolve with technology and your needs; therefore, the FTB-300 UTS provides you with the widest selection of test modules available. From power readings and OTDR testing to optical switching and optical spectrum analysis, the FTB-300 UTS does it all. And the family of plug-and-play modules continues to grow with the continuous introduction of new test modules.

Welcome to the FTB-300 UTS, the evolutionary all-in-one solution for your outside plant testing needs.

Automatically generate reports with information about all events for all the fibers within a cable, as well as produce pertinent statistical information. Automatically perform a number of operations on a series of test files, including OTDR analysis, bidirectional processing, templating, and printing. Document your test results completely and quickly. The Excel-compatible format allows you to create customized reports, use macros, sort data, and generate statistics per cable, project, or contract. When performing OTDR bidirectional averaging, all acquisitions from both directions of a cable can be matched in one operation, either manually or automatically. The touchscreen keyboard allows test documentation in the harshest field conditions. Results can be easily accessed, processed, analyzed, and printed from a desktop PC with ToolBox Office software for maximum efficiency.

[zwereshow-blog]

Wavetek Acterna MTS-5200e Fiber OTDR

Welcome to a Biomedical Battery specialist of the Acterna Battery

The previous generation MTS 5100/5200 has become an industry standard for OTDR testers around the world. The new MTSe builds on this reputation with greatly enhanced speed, performance, and extended test applications for new DWDM network architectures. The MTS 5100e/5200e provides fiber installers and maintenance teams with outstanding performance for improved test productivity, whilst enhanced modular design ensures that the unit is readily field configured for the future. User configuration and upgrade in the field is easy and testing is also simplified with a familiar user interface and integrated test functions.

Features

Field interchangeable modules

Intuitive user interface

Powerful analysis and reporting software

Applications from LAN to very long haul networks

Up to 128 000 acquisition points with 4cm sampling resolution

0.1 s real time sweep

Up to 16 hours battery operation with battery like Acterna FTB-100 Battery, Acterna FTB-400 Battery, Acterna MTS-5000 Battery, Acterna MTS-5000E Battery, Acterna MTS-5100 Battery, Anritsu Lite3000(E) Battery, EXFO FTB-100 Battery, EXFO FTB-400 Battery, EXFO FTB-150 Battery, EXFO FTB-200 Battery, EXFO XW-EX002 Battery, EXFO Battery

400 OTDR traces (typically) in internal memory store

Optional floppy and hard disk drive (1GB)

A Single Unit - Multiple Functions The 5200e is a field modular optical tester for fiber network installation, maintenance and troubleshooting. Two field interchangeable module slots allow users to quickly mix and match configurations to cover any fiber test application from 635 to 1625nm, to DWDM. With two optical module slots side by side, the MTSe offers the highest levels of modularity in a truly field-based unit.

Setting New Standards in the Field The MTS was already renowned for its field capabilities. Every aspect of its outstanding performance is now enhanced in the new MTSe. Field Optimized Compact and lightweight, weighing less than 3.5kg (7.7 lbs), the MTSe is ideal for outside plant testing. A hardened casing with protective bumpers ensures that the unit performs faultlessly even in the harshest conditions, while protected input and output connectors provide excellent resistance to water and dust. Long Battery Life for Improved Productivity Field-testing is maximized by the long operating life of the MTSe - up to 16 hours using two batteries. The Nickel Metal Hydride cells can be rapidly recharged in less than three hours either inside, or outside the unit. An optional 12V DC car adapter further extend field operations. Easy to Operate The MTSe has a familiar, intuitive user-friendly interface that allows simple one button testing in most applications. A large 8.4 inch color display option gives easy to read results for both the trace waveform and tabular event list.

The Need for Speed To improve productivity, the MTSe is based on the latest generation of RISC microprocessor, which combines high performance with low power consumption. The MTSe is now four times faster than the previous model and four times more precise with 128K data points. This allows the field operator to maximize the number of tests and stay operational for longer. Fast Start-Up, Function Swap in Seconds The MTSe is up and running 15 seconds after the unit is powered up enabling almost immediate operation. The unit also facilitates swapping functions, which can be performed in seconds, for example between DWDM and OTDR, or between OTDR and loss-test set testing. Unprecedented Speed and Power The MTSe delivers unprecedented data acquisition speed and processing power.With OTDR ‘real-time’ sweep scan rates of up to 10 times a second, data is instantly available. For high fiber count testing, the multi-task MTSe allows the user to enter filenames, analyze results, and print whilst the unit is acquiring data. This significantly reduces operator workload and improves productivity. Greater Productivity Once calculated, the fiber test parameters can be simply locked-in to the unit ensuring measurement consistency. Simple one-button testing and automatic file-increment facilities also save time in the field. A powerful macro function stores test sequences greatly reducing operator workload for intensive tasks.

High Performance OTDR Testing The MTSe provides unprecedented levels of speed, processing power, resolution, and range. Extremely short dead zones down to 1m can be used to pinpoint faults close to cable junctions or splice points. An outstanding dynamic range in excess of 43dB at 1550nm means that even the longest spans of fiber can be tested. Up to 128K data points ensures that the fiber is characterized with the highest precision. Powerful System Loss Testing The MTSe can be converted into a powerful tester for system loss testing using the light source and power meter options. A combination of large storage and automatic functions (auto-lambda, auto-store, etc.) facilitates testing cables with high fiber counts. The light source has a built-in attentuator, enabling the output power to vary between 0dBm and - 10dBm. For faster measurements, dual wavelength loss can also be measured at the touch of a single key. An additional talkset capability allows operators at both ends to converse in full duplex mode (like a telephone call).

Mainframe specifications

Display Screen: • 8" Black & White or color passive (option 5000/PAS) or 8.4" TFT color (option 5000/COL) • High resolution display • Vertical scale display resolution of 0.001 dB • Horizontal scale display resolution of 0.01 m (0,4 inch) • Screen saver Adjustment • Contrast (Black & White or color passive screen) • Backlight intensity Storage Medium

RAM: 3Mb

Optional 1 Gb Hard disk

Optional 3.5 inch MS DOS compatible HD floppy disk drive Storage capacity

400 OTDR traces typical in internal memory

250 OTDR traces typical on HD floppy disk

Bellcore GR196 or TD 3000 Laser Precision (write only) compatible format for OTDR modules; Wavetek format for OTDR and OTS modules.

Internal printer (optional for MTS 5200e only)

Reference 5200/PR

High quality (graphical) thermic printer

832 dots / line

paper width: 112 mm.

Power supply Batteries

Up to 2 Nickel Metal Hydrid batteries

Battery autonomy at 25° C (for 1 battery):

- up to 8 hours of standard use, with normal backlight, according to Bellcore / Telecordia GR-196-CORE standard.

- up to 3 hours with permanent acquisition, with normal backlight

- up to 2.5 hours with permanent acquisition, with high backlight

[johnnymartyr]

Looking to get into 35mm film photography and wondering what camera to choose, from the dizzying array of possibilities?  You’ve come to the right place!  The following four first film camera suggestions are guaranteed to get you addicted to film and help you become a solid, knowledgable shooter (with lots of practice and reading of course)!

Pentax K1000 – Tried and True

The Pentax K1000 is often called the Ultimate Student Camera.  It was the first adjustable camera that generations of photographers started with, including yours truly.  What’s great about this camera is that it has absolutely no features that you don’t need.  No self timer, no depth of field preview, no battery check, not even a switch to turn the meter on and off!  The K1000 concentrates all your efforts to loading the film correctly, taking the photos correctly and unloading the film correctly.  No distractions.  Zen.  K1000’s are cheap, widely available and very dependable.  One downfall is that they can sometimes command more money than they’re maybe really worth due to their popularity.  You could potentially get a camera with a few more features and bigger lens selection for the same or less $$.  Also, the K1000 is not a camera that most people are likely to continue to use for serious/professional work as their photography skills progress.  Lens selection is relatively small (though compatible with Pentax DSLR’s), there are nicer viewfinders and more accurate meters out there.

  Nikon FM – Gateway into the Nikon Empire

The Nikon FM was what the wealthier kids got as their first 35mm SLR.  It is much like the K1000 but nicer.  Tighter construction, clearer viewfinder optics, just a few tastefully selected additional features, ultra smooth operation, excellent reliability and, most importantly, access to the truly massive and nuanced Nikkor lens and accessory portfolio.  While FM users will be very likely to trade up into an FM2n or FM3a as well as professional Nikon bodies, they will probably always keep their lenses and maybe use the FM as a back-up body, which is what I do.  The FM2n and F2sb are my main Nikon bodies 10 or so years after buying my first Nikon FM but I keep that FM as a reliable back-up.  If you don’t mind the expense, it’s well worth skipping the FM and going straight to an FM2n or FM3a.  And if you are leery about buying used or very old cameras, the FM10 is still available new, however, it is plastic and made by Cosina, not Nikon.

  Olympus OM-1 – Off the Beaten Path

The Oly OM-1 really challenged 35mm SLR design conventions.  It’s the camera for rebels, people just looking for something other than a vanilla K1000 or Leica shooters looking for a cheap, dependable SLR.  The OM-1 is positively tiny for a full frame SLR.  My black paint OM-1n seems to disappear in my hands and it’s cloth shutter is whisper quiet, making it a good candid shooter.  I mention Leica because OM lenses have the aperture closer to the front element and focus ring behind that just like a Leica rangefinder lens.  The big bright viewfinder, small form factor and front top plate mounted film rewind button are also characteristics a Leica shooter will recognize and enjoy.  Speaking of the viewfinder, the OM-1’s finder is just gorgeous with higher magnification and frame coverage than most SLR’s or DSLR’s, it’s deadly accurate and pleasing to look through.  Interchangeable screens will allow you to customize your focusing experience.  Then there’s the Nikkormat-esque shutter speed control which comes in the form of a ring around the lens mount.  This is just a fun and ergonomic way to change speeds.  Mirror lock-up makes macro lens or astro-photography a cinch.  For me, the OM-1 spends more time on my shelf than I’d like because of it’s limiting ISO range, only reaching up to 1600.  I prefer an LED meter display, or at least a larger, more visible swing needle though.  And there are plenty of terrific OM Zuiko lenses out there but their prices can often soar above Nikkor due to their relative scarcity.  You can use these lenses with DSLR’s but only with an adapter.  So the OM-1 is a great camera but choosing it can also paint you into a bit of a corner down the road.

Canon FTb – Smart Buy

Speaking of painting oneself into a corner, buying into the Canon FD mount system is exactly that.  But it may be worth it.  I’ve never personally owned an FTb but I always like to include it for the Canon fans.  I have worked on/handled a few and think they’re worthy cameras.  I don’t recommend the AE-1 because, while like the K1000, it has been monumentally popular student camera, it is not fully manual and it’s auto exposure system feels dated and backwards to me.  The FTb is fully manual/mechanical but takes the same FD and similar early breech mount Canon lenses as the more popular AE-1.  What I like about the FTb is it’s tank-like construction and it’s fun film loading system called Quick Load.  It makes loading film a little bit easier and faster than other cameras yet Canon were the only manufacturer to employ anything like it and they only did so on a handful of models.  So back to FD mount lenses.  The issue with them is that they are not compatible with newer EOS film Canons or Canon DSLR’s.  Unlike Pentax and Nikon, who didn’t change their mount significantly for decades, Canon FD lenses are extremely limited in what they can fit.  This is often viewed as a negative and as a result prices on these cameras and lenses are quite low.  So this is good if you like Canon cameras.  You can easily buy an FTb and a good set of fast prime Canon FD lenses for the same cost as a smaller Nikon, Pentax or Olympus kit.  Provided you’re fine with not building a larger system, this is a really economical way to go.

*I don’t have any photos I’ve taken with an FTb but if you do and would like me to post them here, please reach out!

Below, please check out a spec comparison of these 4 cameras and see what appeals to you.

If you’re interested in purchasing one of these fine 35mm SLR’s, I always recommend using them with a standard 50mm lens in your price range, not a zoom lens.  Also, I recommend buying from places like KEH.com, CollectibleCameras.com or a local camera or repair shop that sells and warranties older film cameras.  It’s important not to purchase off eBay when you are just starting out.  These are all pretty old cameras and, when neglected or abused, will have serious problems that may not ruin your first roll of film, but could ruin one a few rolls down the line, leaving you out a lot of money and time.  It’s important to me that you those interested in film photography have amazing first experiences so that you keep coming back for more.  It’s an easy hobby/field to get discouraged by.  Don’t let it happen to you buy trying to save a few bucks!

Thanks for reading and please don’t hesitate to leave questions/comments below!

    Recommended First Film Cameras Looking to get into 35mm film photography and wondering what camera to choose, from the dizzying array of possibilities?