#home automations in kent

[hannibals-favourite-meal]

.⋆｡Call Your Mom｡⋆.

Clark Kent x plus size reader

I'll drive, I'll drive all night I'll call your mom

Stick Season (We'll All Be Here Forever)

Music softly played through the shitty sound system in your car, providing enough noise for you to stay awake but not enough to wake your passenger. Every few minutes, your eyes would flick over to him as if to make sure that he wasn’t just some hallucination that your caffeine addled mind conjured up. But the way that the rare street lamps would cast a yellow glow onto his face and the occasional shift in his sleep meant that he was very real.

Even in the dim light of this back country road, you could see the tear tracks on his cheeks and the dark bags beneath his eyes. He looked so much smaller than you remembered him, weighed down by the world. You wondered briefly about how long he had felt this way, did it start recently or was it always there, just buried beneath a smile and those bright blue eyes that lingered in your dreams.

He drew in a shuddering breath but then settled back to sleep, the wrinkle of worry above his brow slowly disappearing with each mile you drove. You bit back the urge to push back the lone black curl that had fallen onto his forehead. Instead, you gripped the steering wheel even tighter and thought back to a few hours before, when you received a call from someone you thought you would never hear from again.

You were half paying attention to some late night television show, half awake and numb with the lateness of the hour but the relative calmness of your night was interrupted by the ringing of a phone. Without looking, you fished your phone from the side table and pressed it to your ear. “Yeah?”

Expecting a telemarketer or some automated message, you were shocked as the speakers let out a pitiful sob followed by a voice you used to know so well. “I’m sorry, I didn’t know who else to call- I just- Please.” 

The drive to his apartment went by quick as you forced yourself to act upon instinct and not listen to the still hurting part of your soul that told you to let him suffer just the same as he left you to do so. The achingly familiar walk up the stairs to his apartment made that little voice grow louder and louder until you could barely ignore it.

Your knuckles hovered over the painted wood of his front door, your nerves screaming at you to leave but then the door opened and you knew that you couldn’t. 

Clark Kent, Superman- always so well put together, so stupidly perfect in every way- looked like he was crumbling right before your eyes. Like a great tree wilting away, he was bowed forwards, pale and trembling. You let him pull you into a hug and he collapsed into your arms.

It had been months since the last time you had felt his touch, you were out of practice, slightly clumsy as you cradled his head in one hand and stroked his back with the other. But it was muscle memory, your instincts guiding you back to that spot on the left side of his spine halfway down his back that always had a knot in it but when you dug your fingers into the muscle, he melted, pushing his face into the crook of your neck as his sobs began to taper off.

Neither of you said a word, the discussion, the awkward conversation and the inevitable fight could wait- for a while at least. He trailed behind you like a lost puppy as you guided him down to your car. He squished himself into your small passenger seat and leaned his head against the window as soon as the door shut. 

He fell asleep less than 5 minutes after you started driving, this would have normally annoyed you but you knew he needed the rest and you didn’t need to hear the sound of his voice as your mind reminded you what used to be. 

Soon, street lights and paved roads gave way to corn fields and the gentle sway of a well-worn dirt track. The porch light was on, guiding you home through the darkness. As you pulled into the driveway that you had driven onto countless times before, the screen door opened and Martha, still dressed in her dressing gown, stepped out.

“Clark. You’re home.” You placed a gentle hand onto his shoulder, softly waking him. Those gorgeous blue eyes looked up at you, reflecting the full moon perfectly. He glanced past your body to where his mother stood then back to you. “It’s gonna be ok.”

His smile was enough to make you forget the miles driven in the dead of night, to heal the heartbreak caused by his hand, to remind you that all things can be set right once more.

[Verse 1] Oh, you're spiralin' again The moment right before it ends you're most afraid of But don't you cancel any plans 'Cause I won't let you get the chance to never make them [Pre-Chorus] Stayed on the line with you the entire night 'Til you let it out and let it in [Chorus] Don't let this darkness fool you All lights turned off can be turned on I'll drive, I'll drive all night I'll call your mom Oh, dear, don't be discouraged I've been exactly where you are I'll drive, I'll drive all night I'll call your mom I'll call your mom [Verse 2] Waiting room, no placе to stand Just greatest fears and wringing hands and thе loudest silence If you could see yourself like this If you could see yourself like this, you'd've never tried it [Pre-Chorus] Stayed on the line with you the entire night 'Til you told me that you had to go [Chorus] Don't let this darkness fool you All lights turned off can be turned on I'll drive, I'll drive all night I'll call your mom Oh, dear, don't be discouraged I've been exactly where you are I'll drive, I'll drive all night I'll call your mom [Bridge] Medicate, meditate, swear your soul to Jesus Throw a punch, fall in love, give yourself a reason Don't wanna drive another mile wonderin' if you're breathin' So won't you stay, won't you stay, won't you stay with me? Medicate, meditate, save your soul for Jesus Throw a punch, fall in love, give yourself a reason Don't wanna drive another mile without knowin' you're breathin' So won't you stay, won't you stay, won't you stay with me? [Chorus] Don't let this darkness fool you All lights turned off can be turned on I'll drive, I'll drive all night I'll call your mom Oh, dear, don't be discouraged I've been exactly where you are I'll drive, I'll drive all night I'll call your mom I'll call your mom

All works

@im-a-slut-for-fluff @alexxavicry @ravenwings73 @avada-kedavra-bitch-187 @silverfire475 @psychadelichues @mvyalx @faefanatic @evansqueen54 @anamiad00msday @th3slothy @princess76179 @Lanielagenev @luvvvjada @Lucypaulette @midnight-shadow-va @km-ffluv

DC

@snedhdh @kobaltdragon @blackhawkfanatic @8bookishworm8

[thatyamiguy-blog]

My Adventures with super sissy (DC)

Once upon a time Clark Kent was the world most powerful (if only) superhero and had been known as Superman, a champion of justice even if he hadn't quite been trusted by parts of the government and treated with down right hatred by a group who guarded the multiverse. The former was know as Cadmus, and had settled into a semi uneasy peace with the being they THOUGHT was superman while the latter was the league of Lois's, who had due to a deal struck up with a 5th dimensional being known of mister Mxyzptlk (Call him Mxy for short) now each of the five hostile members of the league had minor levels of superman's powers while the real man of steel was left a helpless weakling. Mxy of course understood that the universe he was devoiding of it's superman might still need him and so that everything would go on (and so he could taunt the now helpless Clark) he'd assumed Kal-el's form and identity. in the mere year since Mxy had taken over Clark's life 'Clark Kent' had gone from a novice reporter to a award winning author, husband of the amazing Lois Lane while Superman's reputation had gone though the roof. For Clark himself however the past half year had been spent in diapers, dresses and constant humiliation, being forced to earn any and all diaper change with use of his mouth. for the ex-power house it was a cruel joke, and naturally seemed VERY unfair, but there was nothing he could do except be grateful that over time the female Lois's seemed to lose interest in him (A fact he hoped might one day lead to his freedom) though as their interest slacked, Lewis Lane, aka Nightwing, took a growing interest in 'super sissy' as Clark was known now. In a semi cruel twist, the Lois's hadn't really cared about Clark's attire just as long as he was in the massive bulky diapers where his once proud manhood was trapped, now just a one inch clit and his large balls turned into small sissy sized balls that almost just looked like one ball, referred to as a 'pom pom sack' by Nightwing's sidekick, a female Jimmy Olsen called Flamebird. These days when the former man of steel was able to earn it/managed to hump a stuffie load enough to cum he didn't even produce anything, at best he peed a little. Lewis meanwhile had seen from the start that whenever he was with little super sissy the ex hero was dressed in frilly sissy outfits and his trademark curl would be poking out from under a baby bonnet, and a series of baby food and cum stained bibs that declared him a daddies gurl or the like. Left between only being looked after by a automaniac nursery and ignore or having to be Lewis's little gurl, Clark hadn't yet made up his mind which was worse, only knowing that both fates were unfair. it would help if while Clark was forced to give 'daddy' the attention he demanded before changing any of the frankly epic dirty diapers Clark made (what he lacked in his former powers he made up for in diaper usage, a final 'gift' of Mxy) was somehow it was always when Clark had a mouth full of daddy cock when Mxy would give Clark a little 'treat', letting him see him having sex with Lois or worse, when a series of BJ's over the course of a month had been loaded with Mxy's and Lois's wedding and honeymoon. Nothing slammed home the point that no rescue was coming because no one knew he was gone like seeing his own parents talking at the wedding reception about how happy the couple were and how proud of him they were. dressed in a silk light pink nightie and one of his many bulky diapers that would sag, droop but never leak (though they did nothing for his constant diaper rash or the smell) Clark mewed softly trying to decide if he was willing to let the automated nursery handle his good morning diapers like it usually do or swallow one last piece of pride and ask the machine to call for daddy.. since Lewis would at least use rash care..

Lewis as per normal when he first got up was basking in a sun chamber, a room they had added to the ship to help boost their meager kryptonian powers to something a little more threatening and while having a light breakfast of coffee and toast, peeked in on his favorite version of superman in the whole wide multiverse. There was the little sissy, stewing in his own filled diaper and looking just EVER so cute in his pretty little bedtime wear and chewing on his bottom lip as he looked around, giving the AI that ran the nursery (A re-purposed Braminic 5 for added insult to injury) time to decide if it was gonna act or if it was gonna just leave him to beg for changies or, If Lewis was VERY lucky, wait for the whimpering super sissy to ask for daddy. It was odd, Lewis had never been into guys (or diapers or sissies) before seeing the 'new and improved' Clark but something about the little cream puff just excited him and kept him coming back for more even as the ladies slowly lost interest in the smelly little weakling. Taking a final sip of his coffee Lewis smile grew so big it actually kind of hurt as Nannyic five (his nickname for the repurpose future hero and superman fanboy) chimed in even as he lip read what Super sissy was saying and watching the poor weakling blush and blubber in shame. "Sir, the sissy baby has requested that you come and handle his diaper change, saying that he 'missies him's da-da.' Shall I let him know your on your way?" The AI asked, sounding somehow formal and disgusted at the same time. "Heh, of course, though make sure to correct Super sissy. it's she not he, after all Super sissy is a daddy's gurl." Lewis said, getting up and heading for the door.

It only took at most 5 minutes for Lewis to go and get changed, for reasons that only rao knew why, Lewis loved being dressed in his Nightwing outfit when playing with Clark though the ex-hero was both relived and humiliated as the handsome stud walked in, wrinkling his nose even as he smiled. "I had a report of a epic mudslide happening, and a request from help?" he asked with a laugh even as Clark mentally groaned at the lame pun. "Daddy! Your here! I'm so happy!" the ex-hero coo'ed, not exactly a lie since it meant a diaper rash cream diaper change but still didn't mean he'd like paying the price for his diapie change. "Aww, I missed you too princess." Lewis coo'ed, coming over and ruffling Clark's hair and making the humiliated sissy semi swoon from the touch. "though i don't miss that smell.. I really need to talk the ladies into letting me get you on a pill diet that'll cut down on the smell even if it triples the waste." Lewis commented. Since as was Clark was capable of loading a diaper so much it would look like he stuffed a few pillows in the back of his diapers he didn't relish the thought of somehow going even more though kept this to himself as he knew what role he was expected to play. gurgling and making sure a line of drool was leaking down his chin, Clark crawled super close to Lewis and started to nuzzle and kiss/blow spit bubbles at the hero's costume clad cock which was responding rapidly to the 'hungry' sissy, tenting out the material of Lewis's Nightwing costume and a throbbing cock head poking Clark's left cheek and leaking some pre, getting it damp.. For most strait men a total nightmare but for super sissy, this was a good morning kiss. "awww, somebody missed daddy lots! Tell you what stinker, how about for a change daddy gets you all cleaned up, then you can give him a nice long sloppy mouth present without making daddies eyes water?" Lewis coo'ed, a strong hand on Clark's head and holding it there while he bobbed his still covered cock head in and out of the sissies open mouth, making a line of drool going from the cock tent to super sissy's soft lips. Clark knew there had to be a catch, that something was up but he nodded in agreement with daddy that it sounded good, 99 percent to get out of his itchy and smelly diaper.. and a small tiny 1 percent that wanted daddies BJ to be super enjoyable for him.

Making use of his enhanced speed and the fact he could hold his breath for half a hour if needed to be, Lewis was able to quickly get Clark cleaned up, smirking over his itty bitty clitty and working his fingers while covered with a wipe in and out of the little wimps super greedy hole, gushing at how cute Clark's reaction was mentally and almost gushing in his pants as well as the sissy gurgled and cried out daddy, then sucked on his thumb while jerking his hips, clearly having one of his drygasm's. "Awww, somebody loves it when daddy plays with her pussy huh? too bad your not a big enough girl for a full on ride huh princess?" Lewis teased, making the blushing and gasping thumb sucking sissy drygasm anther two times before pulling his fingers out. Any hint of defiance or hate was gone from the little wimps eyes, as normal after being made to cum like that (Dry Cuming didn't actually make poor Clark less horny, it only made it worse.. Thanks Mxy!) and Lewis knew he'd have the poor thing eating out of his hand for at least a good hour, if not longer. 'Such a shame the Lois's never caught on that letting him drygasm makes him so easy to mold to your liking. they all thought edging and gooning was the way.' Lewis mused, knowing that a big part of the fact the ladies didn't know any better was he didn't tell them since he wanted Clarkie all to himself. getting Clark dressed in a fresh set of cloth diapers, snuggly pinned and with half a bottle of soothing baby power and loads of cream on the poor little things bright red from rashes backside, Lewis had his little princess stand up and brace himself on Lewis's broad shoulders while helping him step into the red plastic panties he'd picked out for the little sissy. which when combined with the blue sundress he'd also picked out would likely have Clark getting SUPER fussy, but that was ok. Lewis didn't mind a huffy little sissy baby, somehow when he was huffy Clark gave even better BJ's. 'I wonder if that counts as hate fucking? heh, question for the ages right there.' Lewis mused as the panties were secured around the big babies diapers and hips. Clarkie wouldn't even get a chance to see the dress though, as someone was clearly all worked up. As Lewis went to stand up Clark kneeled down and nuzzled and kissed Lewis's cock and gave a whimpering whine and looked up at him with such a pleading look that for a second Lewis felt ashamed of himself for holding back from the needy gurl, before he snapped back to normal. "heh, Ok Princess. I don't know what's got you THIS cock starved, but like a good daddy I know when to shut up and listen." Lewis chuckled, tugging his 9 inches of fuck meat out and his hand wasn't even cleared before Clark was sliding his mouth down the shaft. '…I really should scold her for not waiting but fuck it. what's a bad habit or two?' Lewis thought and moved his hands out of the way as Clark grabbed and tugged the tights down and freed Lewi's heavy balls, massaging them and pulling away from the shaft to shower them in kisses and licks while stroking daddy. '..Ok new rule. ALWAYS change him first if this is how he's gonna..' Lewis was thinking moaning and spreading his legs as he thought about just how lucky he was.

Clark was semi horrified with himself, going to town like a depraved slut with none of his normal restraint but somehow just giving in and going all out like this was making his fairy wand tingle and twitch in his diapies. 'Fairy wand? oh wow, you really ARE broken huh?' came a familiar voice in Clark's head.. Mxy! 'Sup super sissy? thought I'd check in and since you basically were offering yourself up for a nice and gentle diapie change I thought I'd give you a little push here and there to help encourage this happening more often. you ARE my favorite show after all.' the imps voice chuckled. 'I.. this isn't..' Clark thought desperately even as his drool ran like crazy and he was deep throating daddy now, only showing semi restraint since Lewis's thick pube's tickled his nostril's when he went too fast. 'Yeah yeah, whatever cock breath. Look, I've been giving you some grade A 5 star shows with me and Lois, Lana and even that twink Jimmy, but on your end of things it's been lame o city! So I thought I'd step in and lend some help before I have to cut you off.' Mxy chuckled, even as Clark moaned like a slut in heat and wet his clean diapies. 'Please stop this! I don't WANT to see what you've been doing!' Clark thought as Lewis picked up the pace. 'Hu, you sure? I figured getting to see me pounding Lois was at least SOMETHING hetro in your days full of sissy fagness but oook. consider yourself cut off! That being said, you still have a back log to make up to me and spoiler: Lewis has been spoiling you and holding back so your gonna start offering special kisses for his back side. You can do it on your own tomorrow orrr I can take the drivers seat and make it SO much worse.' Mxy snickered. 'HOW? HOW could you make any of this even w-' Clark started to think. 'Three words: Human toilet paper.' Mxy laughed then switched his attention. 'Damn, here comes the money shot, figured Lewis would last longer.. get ready to pull off and get a facial sissy or I'm making you ask for a ba-ba of 'apple juice' Mxy said then his voice faded away.

Lewis was shocked and surprised but also delighted as right as his load was about to burst out super sissy pulling back and jerking his cock hard, closing his eyes and holding open his mouth and sticking out his tounge as Lewis's load coated his face. "you know normally I'd be mad about you wasting a load but.." Lewis panted as he started to come down. "a cum stained face is a good look for you princess." "T-Thank you daddy I.. wasn't sure if you'd like it." Clarkie mewed, blushing even as he reached up and started to scoop part of the cum into his mouth, the rest he rubbed on his body and in his hair giving him a distinctive smell. "heh, Ok Princess, what are you doing?" Lewis asked. his cock still out and semi hard. "Marking myself as yours daddy.. cuz I wanna go to the park and play and get shown off." the sissy coo'ed and gave a classic superman wink at Lewis who.. for the first time since he was a young teenager, came hands free and coated Clark's face, making the sissy giggle and blow cum bubbles. "I take it daddy wuvs my idea!" the drenched sissy gurgled. A small part of Lewis had always wondered if once Clarkie was truly broken, once she was just a cock craving diaper gurl in heart and mind and wanted to be shown off with no having to worry about escape attempts if he'd still find the smelly little sissy as hot as he did, and as Lewis watched Clark apply a second coating of daddy's milk to his wimpy frame he had his answer even as Clarkie shudder and sucked on a drenched thumb, having a drygasm. "Your too fucking cute and somehow I love you even more now then before." Lewis said, scooping the cum soaked fairy up and kissing him, not minding his own taste on the sissies lips, not knowing that he'd had had help finally breaking the former man of steel or that there was still a tiny fight in there, but now it was 1 percent fighting to the 99 percent good gurl.. Not that Lewis would of minded as he let his happy little gurl pick out a outfit.

The end

[cleverhottubmiracle]

Many members of the British Textile Machinery Association (BTMA) have over the years established leading positions in the areas of testing, instrumentation and machine control. A number of new developments in these fields will be showcased at this year’s ITMA Asia + CITME exhibition, which takes place in Singapore from October 28-31.BTMA members will showcase advanced innovations in testing, colour, and machine control at ITMA Asia + CITME in Singapore (28–31 October). Highlights include new colour research, LED colour booths, UV testing lamps, digital fabric handle testing, automated patterned fabric inspection, and a next-gen Martindale Motion tester, all enhancing textile quality and efficiency. “Many of our members are currently developing new technologies, either in-house or increasingly through joint projects, and there will be much to reveal by the time of ITMA Asia in Singapore,” says BTMA CEO Jason Kent. “Some of the most recent developments are really going beyond what has previously been possible.” New colour Verivide, for example, as a leader in colour measurement and management solutions, has been fascinated by the recent news that scientists appear to have discovered a completely new colour named OLO – not a variant or pigment, but a hue never before perceived by the human eye. “We had to take a closer look, because OLO marks a fascinating step forward in the science of colour perception,” says VeriVide Sales Director Adam Dakin. “It’s not just a breakthrough for vision research but may change the way we think about colour in design, technology and quality control.” The newly perceived colour does not exist on the traditional visible spectrum which means it’s not created by mixing wavelengths of light like red, green or blue. Instead, scientists achieved it by using precise laser stimulation directly on the retina, effectively bypassing the usual pathways the human visual system uses to interpret colour. “Currently, OLO can only be experienced under lab conditions but its discovery hints at a future where our understanding of vision – and our ability to manipulate it –expands dramatically,” says Adam. “Could this pave the way for broader applications in VR design, colour-critical manufacturing, or even new forms of digital colour communication? Only time will tell.” Eliminating mercury In a major change for colour assessment this February, the sale of all fluorescent lighting officially came to an end in the EU and UK, with potentially significant implications for everyone along the supply chain – from designers and fabric manufacturers through to merchandisers and window display artists. “The phase-out of fluorescent lamps has been in progress for some years because they contain mercury which can be damaging to health,” explains Adam. “Lamps containing mercury were banned for general use in August 2023, impacting lighting in homes, factories and retail environments, but an exemption was granted for specialist applications such as visual and digital colour assessment until this month. VeriVide has spent the last decade developing and optimising its industry-leading all-LED light booths as part of its ecosystem of products specifically designed for instantly communicating colour decisions, colour fastness gradings, test reports and more, incorporating the DigiEye and DigiView digital colour measurement systems. “What the ban means is we’ll no longer be able to manufacture fluorescent light booths,” says Adam. “Since its launch in 2023, Ultra-View all-LED technology has already been successfully adopted by leading retail brands including H&M, George by Asda, Marks & Spencer, NEXT, River Island and Tesco.”  Broader spectrum Q-Lab Corporation is meanwhile a global leader in lightfastness and weathering test equipment and services and has just launched a new breakthrough in UV testing – TUV-421 lamps.  This new light source, exclusive to Q-Lab, enables testing for colour changes and fade in materials whose colorants are susceptible to longer-wavelength UV and shorter-wavelength visible light. This includes pigments and dyes found in textiles, as well as plastics, paints and printing inks.  TUV-421 lamps help distribute a much broader spectrum of light, compared with typical UVA-340 lamps, while continuing to provide the same excellent spectral match for shortwave light.  Lightfastness and weathering durability can meanwhile be accurately determined in the compact, affordable, versatile and accurate Q-SUN xenon test chamber.  Using full-spectrum xenon arc lamps and optical filter systems, Q-SUN testers can reproduce direct daylight or sunlight-through-window-glass conditions and feature optional humidity control and water spray. The tactility challenge Just as elusive as the new colour OLO, is the concept of ‘fabric handle’ – the tactile sensation experienced when touching and manipulating fabric. Although very subjective, it is, however, a critical aspect of textile evaluation, but to date it’s been very subjective and one of the biggest challenges faced by designers and manufacturers is in describing and sharing information about fabric aesthetics before manufacturing, or without the costly and time-consuming process of transporting physical samples. These limitations are being overcome with the new Sentire fabric handle tester which has just been launched by Roaches International. “No two people will describe how a fabric feels in the same way and the lack of a common language to describe fabric tactility poses communication challenges across the complex global fashion and textile supply chain,” says Roaches International MD Sean O’Neill. “How do you objectively measure qualities like softness, smoothness, drape, and stiffness?” The answer is with the new Sentire. Haptic spatial system Roaches worked with specialists at the University of Leeds to develop the new finished fabric evaluation system which defines the tactile properties of fabrics via a haptic spatial system – similar, for example, to the way colour charts are digitally defined for colour palettes, or Tog values rate warmth. Fabric samples are placed into the Sentire to run a series of tests which generate quantitative fabric tactile property data akin to a fingerprint for the fabric, which can then be compared against other samples and communicated digitally to partners in different locations.  “This technology has the potential to impact the supply chain in a similar way to the spectrophotometer for the communication of colour,” says O’Neill. “We have had a fantastic initial response to the Sentire and its possibilities are huge. Not only can it be used to compare textile tactility globally, but we are also seeing interest from online retailers who want to accurately display the way a particular fabric drapes on the body.” Patterned fabric inspection The precise detection of defects during the production of fabrics has meanwhile recently been significantly advanced with the introduction of the latest WebSpector automated fabric inspection system by Shelton Vision. Building on its market leading vision system for plain, single colour textiles, Shelton’s patent-pending image processing techniques now recognise and adapt to complex patterns such as camouflage and even on fabrics with significant distortion and deformation.  Fabrics are not rigid and can be sheared or stretched while also being subject to local distortion, but the WebSpector system now successfully deals with such anomalies in real time to provide a reliable inspection process at the same levels as plain fabric.  The unique and advanced software techniques ensure a totally clean image, allowing the full detection of faults on fabrics running at high speeds. WebSpector systems have already been supplied to manufacturers of performance wear and high-end fashion, automotive interiors, denim, outdoor upholstery, sunscreen, mattress ticking, window dressings and even carbon fibre composites. The latest Webspector was introduced at ITMA 2023 in Milan to great acclaim and will be demonstrated for the first time in Asia at the Singapore exhibition. Abrasion and pilling testing  Martindale testing needs little introduction to textile manufacturers, being well established as the industry standard for abrasion and pilling testing since its initial development and introduction by James Heal back in the 1940s. For 2025, however, James Heal’s development team have taken a fresh look at this classic instrument and the result is the new Martindale Motion. This redesigned nine-station Martindale instrument with individual lifting heads now offers the flexibility to run each station independently for carrying out different textile tests simultaneously. Multiple textiles can be tested at the same time through to conclusion without intervention. Once set up, the Martindale Motion can be left running with the sample holders automatically lifting at the required evaluation points, freeing up the operator’s time to do other work without the need to return until the abrasion or pilling test is fully completed, including overnight. Each sample is kept in-tact at the end point for evaluation and checking, reducing queries on grading and the potential need for re-testing. Further refinements include a new hinged access to change the self-aligning drive pins, allowing quick and safe switching between tests. Designed and manufactured in the UK, the James Heal Martindale range has seen numerous updates, models and innovations over the years, such as touchscreen and user-friendly software, best-in-class safety features combined with the signature near silent running of this staple lab instrument. Added to this have been the introduction of the DurAbrasion multi-function testing machine, later followed by the market-leading evolution, the AquAbrasion wet abrasion tester launched in 2019. The Martindale Motion, however, is now taking productivity and efficiency to a higher level than ever before. Pushing the boundaries “These BTMA companies continue to push the boundaries of what’s possible in the area of textile testing,” says Jason Kent in conclusion. “They are each making solid contributions to the quality and performance properties of today’s textile products, and just as importantly, enabling manufacturers to prove their claims. We look forward to meeting customers old and new in Singapore.” Founded in 1940, the British Textile Machinery Association actively promotes British textile machinery manufacturers and their products to the world. The non-profit organisation acts as a bridge between its members and the increasingly diverse industries within the textile manufacturing sector. Note: The headline, insights, and image of this press release may have been refined by the Fibre2Fashion staff; the rest of the content remains unchanged. Fibre2Fashion News Desk (HU) Source link

[norajworld]

Many members of the British Textile Machinery Association (BTMA) have over the years established leading positions in the areas of testing, instrumentation and machine control. A number of new developments in these fields will be showcased at this year’s ITMA Asia + CITME exhibition, which takes place in Singapore from October 28-31.BTMA members will showcase advanced innovations in testing, colour, and machine control at ITMA Asia + CITME in Singapore (28–31 October). Highlights include new colour research, LED colour booths, UV testing lamps, digital fabric handle testing, automated patterned fabric inspection, and a next-gen Martindale Motion tester, all enhancing textile quality and efficiency. “Many of our members are currently developing new technologies, either in-house or increasingly through joint projects, and there will be much to reveal by the time of ITMA Asia in Singapore,” says BTMA CEO Jason Kent. “Some of the most recent developments are really going beyond what has previously been possible.” New colour Verivide, for example, as a leader in colour measurement and management solutions, has been fascinated by the recent news that scientists appear to have discovered a completely new colour named OLO – not a variant or pigment, but a hue never before perceived by the human eye. “We had to take a closer look, because OLO marks a fascinating step forward in the science of colour perception,” says VeriVide Sales Director Adam Dakin. “It’s not just a breakthrough for vision research but may change the way we think about colour in design, technology and quality control.” The newly perceived colour does not exist on the traditional visible spectrum which means it’s not created by mixing wavelengths of light like red, green or blue. Instead, scientists achieved it by using precise laser stimulation directly on the retina, effectively bypassing the usual pathways the human visual system uses to interpret colour. “Currently, OLO can only be experienced under lab conditions but its discovery hints at a future where our understanding of vision – and our ability to manipulate it –expands dramatically,” says Adam. “Could this pave the way for broader applications in VR design, colour-critical manufacturing, or even new forms of digital colour communication? Only time will tell.” Eliminating mercury In a major change for colour assessment this February, the sale of all fluorescent lighting officially came to an end in the EU and UK, with potentially significant implications for everyone along the supply chain – from designers and fabric manufacturers through to merchandisers and window display artists. “The phase-out of fluorescent lamps has been in progress for some years because they contain mercury which can be damaging to health,” explains Adam. “Lamps containing mercury were banned for general use in August 2023, impacting lighting in homes, factories and retail environments, but an exemption was granted for specialist applications such as visual and digital colour assessment until this month. VeriVide has spent the last decade developing and optimising its industry-leading all-LED light booths as part of its ecosystem of products specifically designed for instantly communicating colour decisions, colour fastness gradings, test reports and more, incorporating the DigiEye and DigiView digital colour measurement systems. “What the ban means is we’ll no longer be able to manufacture fluorescent light booths,” says Adam. “Since its launch in 2023, Ultra-View all-LED technology has already been successfully adopted by leading retail brands including H&M, George by Asda, Marks & Spencer, NEXT, River Island and Tesco.”  Broader spectrum Q-Lab Corporation is meanwhile a global leader in lightfastness and weathering test equipment and services and has just launched a new breakthrough in UV testing – TUV-421 lamps.  This new light source, exclusive to Q-Lab, enables testing for colour changes and fade in materials whose colorants are susceptible to longer-wavelength UV and shorter-wavelength visible light. This includes pigments and dyes found in textiles, as well as plastics, paints and printing inks.  TUV-421 lamps help distribute a much broader spectrum of light, compared with typical UVA-340 lamps, while continuing to provide the same excellent spectral match for shortwave light.  Lightfastness and weathering durability can meanwhile be accurately determined in the compact, affordable, versatile and accurate Q-SUN xenon test chamber.  Using full-spectrum xenon arc lamps and optical filter systems, Q-SUN testers can reproduce direct daylight or sunlight-through-window-glass conditions and feature optional humidity control and water spray. The tactility challenge Just as elusive as the new colour OLO, is the concept of ‘fabric handle’ – the tactile sensation experienced when touching and manipulating fabric. Although very subjective, it is, however, a critical aspect of textile evaluation, but to date it’s been very subjective and one of the biggest challenges faced by designers and manufacturers is in describing and sharing information about fabric aesthetics before manufacturing, or without the costly and time-consuming process of transporting physical samples. These limitations are being overcome with the new Sentire fabric handle tester which has just been launched by Roaches International. “No two people will describe how a fabric feels in the same way and the lack of a common language to describe fabric tactility poses communication challenges across the complex global fashion and textile supply chain,” says Roaches International MD Sean O’Neill. “How do you objectively measure qualities like softness, smoothness, drape, and stiffness?” The answer is with the new Sentire. Haptic spatial system Roaches worked with specialists at the University of Leeds to develop the new finished fabric evaluation system which defines the tactile properties of fabrics via a haptic spatial system – similar, for example, to the way colour charts are digitally defined for colour palettes, or Tog values rate warmth. Fabric samples are placed into the Sentire to run a series of tests which generate quantitative fabric tactile property data akin to a fingerprint for the fabric, which can then be compared against other samples and communicated digitally to partners in different locations.  “This technology has the potential to impact the supply chain in a similar way to the spectrophotometer for the communication of colour,” says O’Neill. “We have had a fantastic initial response to the Sentire and its possibilities are huge. Not only can it be used to compare textile tactility globally, but we are also seeing interest from online retailers who want to accurately display the way a particular fabric drapes on the body.” Patterned fabric inspection The precise detection of defects during the production of fabrics has meanwhile recently been significantly advanced with the introduction of the latest WebSpector automated fabric inspection system by Shelton Vision. Building on its market leading vision system for plain, single colour textiles, Shelton’s patent-pending image processing techniques now recognise and adapt to complex patterns such as camouflage and even on fabrics with significant distortion and deformation.  Fabrics are not rigid and can be sheared or stretched while also being subject to local distortion, but the WebSpector system now successfully deals with such anomalies in real time to provide a reliable inspection process at the same levels as plain fabric.  The unique and advanced software techniques ensure a totally clean image, allowing the full detection of faults on fabrics running at high speeds. WebSpector systems have already been supplied to manufacturers of performance wear and high-end fashion, automotive interiors, denim, outdoor upholstery, sunscreen, mattress ticking, window dressings and even carbon fibre composites. The latest Webspector was introduced at ITMA 2023 in Milan to great acclaim and will be demonstrated for the first time in Asia at the Singapore exhibition. Abrasion and pilling testing  Martindale testing needs little introduction to textile manufacturers, being well established as the industry standard for abrasion and pilling testing since its initial development and introduction by James Heal back in the 1940s. For 2025, however, James Heal’s development team have taken a fresh look at this classic instrument and the result is the new Martindale Motion. This redesigned nine-station Martindale instrument with individual lifting heads now offers the flexibility to run each station independently for carrying out different textile tests simultaneously. Multiple textiles can be tested at the same time through to conclusion without intervention. Once set up, the Martindale Motion can be left running with the sample holders automatically lifting at the required evaluation points, freeing up the operator’s time to do other work without the need to return until the abrasion or pilling test is fully completed, including overnight. Each sample is kept in-tact at the end point for evaluation and checking, reducing queries on grading and the potential need for re-testing. Further refinements include a new hinged access to change the self-aligning drive pins, allowing quick and safe switching between tests. Designed and manufactured in the UK, the James Heal Martindale range has seen numerous updates, models and innovations over the years, such as touchscreen and user-friendly software, best-in-class safety features combined with the signature near silent running of this staple lab instrument. Added to this have been the introduction of the DurAbrasion multi-function testing machine, later followed by the market-leading evolution, the AquAbrasion wet abrasion tester launched in 2019. The Martindale Motion, however, is now taking productivity and efficiency to a higher level than ever before. Pushing the boundaries “These BTMA companies continue to push the boundaries of what’s possible in the area of textile testing,” says Jason Kent in conclusion. “They are each making solid contributions to the quality and performance properties of today’s textile products, and just as importantly, enabling manufacturers to prove their claims. We look forward to meeting customers old and new in Singapore.” Founded in 1940, the British Textile Machinery Association actively promotes British textile machinery manufacturers and their products to the world. The non-profit organisation acts as a bridge between its members and the increasingly diverse industries within the textile manufacturing sector. Note: The headline, insights, and image of this press release may have been refined by the Fibre2Fashion staff; the rest of the content remains unchanged. Fibre2Fashion News Desk (HU) Source link

[kentautomationaudiovisual]

The ultimate home cinema experience in Kent, where innovation meets luxury. Our Home Cinema Installation & Design services redefine entertainment within the comfort of your own space.

[flatsinkochikerala]

Lead a Life of Luxury with Kent Constructions | Kent Eco Sanctum

Kent Constructions Pvt. Ltd. is a trusted name in delivering exceptional living spaces that blend cutting-edge technology with superior craftsmanship. Our residential projects are thoughtfully located in prime areas of Kochi, offering residents easy access to essential city services, transport hubs, and urban conveniences.

If you're looking for flats for sale in Kochi, we offer a diverse portfolio of properties designed to suit a variety of lifestyles and preferences. At Kent, we employ the latest in construction technology to ensure that every flat, apartment, and villa meets the highest standards of quality, safety, and long-term durability.

Our homes are designed to be smart, sustainable, and future-ready, incorporating advanced home automation and energy-efficient features for added comfort and convenience. Residents also enjoy premium amenities including fully equipped fitness centers, swimming pools, recreational spaces, and beautifully landscaped gardens.

Whether you’re seeking a luxurious apartment or an elegant villa, Kent Constructions offers refined living experiences that truly elevate your lifestyle. For modern, stylish, and well-connected flats and apartments in Kochi and Ernakulam, Kent is the name you can rely on.

Explore our latest projects today and discover your ideal home in Kochi.

[elite-electrical-kent]

Understanding the Process of Smart Home Integration

The concept of a "smart home" has rapidly evolved from futuristic fantasy to a practical and desirable reality for modern homeowners. By integrating cutting-edge technologies with everyday home systems, smart homes offer convenience, enhanced security, energy efficiency, and even increased property value. But what exactly goes into transforming a traditional house into a smart one? This article explores the essential steps and considerations involved in the smart home integration process.

What is Smart Home Integration?

Smart home integration involves connecting various devices and systems—such as lighting, heating, security, and entertainment—into a centralized platform that allows homeowners to control them remotely or automatically. This integration often uses a combination of Wi-Fi, Bluetooth, Zigbee, or Z-Wave protocols to enable devices to communicate with each other and with a central hub or app.

Step-by-Step Process of Smart Home Integration

1. Assessing Needs and Goals

Before diving into installation, the first step is assessing your lifestyle and goals. Are you looking to improve security, reduce energy bills, or enjoy the convenience of voice-controlled lighting and appliances? Defining your objectives helps guide the selection of compatible devices and systems.

For example, someone focused on energy efficiency may prioritize smart thermostats, lighting, and solar panel monitoring, while a tech-savvy homeowner may be interested in voice assistants and home automation routines.

2. Planning and Infrastructure Evaluation

Smart home systems rely heavily on a stable and secure Wi-Fi network. A thorough evaluation of the home's layout and existing infrastructure is essential to ensure signal coverage in every room. In many cases, upgrading the router or installing range extenders may be necessary.

Additionally, older homes might require updated wiring or new outlets to accommodate advanced smart devices. This is where a qualified professional, such as an Electrician in Tonbridge, can ensure that the home’s electrical system is safe and capable of supporting smart technologies.

3. Choosing a Central Control Hub

A central hub acts as the brain of the smart home, allowing all devices to connect and communicate. Popular options include Amazon Echo, Google Nest Hub, and Apple HomeKit. When choosing a hub, it's crucial to consider compatibility with the devices you plan to install.

The hub not only centralizes control but also enables automation features—such as turning off all lights and locking doors when you leave home.

4. Device Selection and Compatibility

With an array of smart devices available, from bulbs and thermostats to cameras and doorbells, it's important to select products that work together seamlessly. Most manufacturers now clearly list compatible platforms and hubs on their packaging or websites.

Popular categories include:

Smart Lighting – Controlled by voice, app, or sensors.

Smart Thermostats – Learn your habits to optimize heating/cooling.

Smart Security Systems – Cameras, door sensors, and alarms that alert you in real-time.

Smart Plugs and Switches – Turn ordinary appliances into smart ones.

A local expert such as an Electrician in Sevenoaks can help with installing and setting up wired smart systems, especially for lighting or integrated alarms.

5. Professional Installation vs. DIY

While many smart devices are designed for easy self-installation, more complex systems—like in-wall switches, home security networks, or smart HVAC systems—require professional expertise. Poor installation not only risks damaging expensive equipment but also poses safety concerns.

Engaging a certified electrician ensures compliance with local building codes and safe integration. For residents in Kent, consulting a trusted Electrician in Tunbridge Wells can provide peace of mind and ensure that your smart home setup is both efficient and secure.

6. Automation and Customization

Once devices are installed, the real magic of smart homes begins with automation. Routines can be programmed to suit your lifestyle:

Wake-up scenes with gradual lighting and morning news.

Motion-activated outdoor lights for security.

Thermostat adjustments based on occupancy sensors.

Voice commands to control multiple devices simultaneously.

These customizations not only enhance comfort but also improve energy efficiency.

7. Ongoing Maintenance and Updates

Like any tech ecosystem, smart home systems require regular maintenance. Software updates help fix bugs, enhance security, and introduce new features. It's also important to monitor device performance and replace outdated hardware as needed.

Most platforms provide easy access to firmware updates via their mobile apps. A reliable electrician or smart home consultant can also assist with troubleshooting or future expansions of your setup.

The Future of Smart Living

As technology continues to evolve, smart home integration is expected to become even more intuitive and intelligent. Artificial intelligence, voice recognition, and machine learning will further personalize how homes respond to our needs.

For homeowners, this means not just convenience but also tangible benefits—such as lower utility bills, enhanced safety, and an increased property value. Whether you're retrofitting a single room or planning a whole-home upgrade, smart home integration is an investment in both comfort and the future.

Conclusion

Smart home integration is a step-by-step process that begins with understanding your needs and ends with creating a responsive, efficient living space. While some components are suitable for DIY installation, involving professionals ensures a safe and seamless experience. Whether you're working with an Electrician in Tonbridge, an Electrician in Sevenoaks, or an Electrician in Tunbridge Wells, expert guidance can make all the difference in turning your smart home dreams into reality.

[scopehome17]

Alarm Security Systems Installation Kent

Welcome to Scope Home Security. We cover all aspects of gate and door automation and CCTV home alarms and more across Kent.

Alarm Security Systems Installation Kent

[bijlikidukan]

Cooking Simplicity Redefined: A Closer Look at India’s Finest Rice Cookers

In Indian kitchens, where rice is a staple on almost every dining table, the demand for efficient and time-saving appliances is ever-growing. Over the past few years, rice cookers have transitioned from being a luxury to an everyday kitchen necessity. Their ability to deliver perfectly cooked rice with minimal effort has made them a favorite among working professionals, students, and home cooks alike. But with countless options in the market, finding the best rice cooker in India can be both confusing and overwhelming.

Why Rice Cookers Are Changing the Way We Cook

Traditionally, cooking rice required constant attention. The right water ratio, heat control, and timing were crucial. A moment’s delay could lead to either undercooked or burnt rice. Rice cookers, however, eliminate this guesswork. They not only automate the cooking process but also ensure consistency—something that’s hard to achieve on a regular gas stove.

Modern rice cookers come equipped with smart features like automatic shut-off, keep-warm function, delay timers, and multi-grain settings. Some high-end models even allow you to prepare a variety of dishes, from porridge and pulao to steaming vegetables and momos, making them a multipurpose kitchen companion.

What to Look for When Choosing a Rice Cooker

Before you make a purchase, it's essential to consider what your needs are. Here are a few factors to keep in mind:

Capacity: A 1-liter cooker is ideal for singles or couples, while families of 4-6 might need something around 1.8 to 2 liters.

Type of Cooker: Conventional electric cookers are simple and affordable. However, if you’re someone who enjoys experimenting, an advanced digital rice cooker with multiple settings might suit you better.

Ease of Cleaning: Non-stick inner pots and detachable parts make cleaning hassle-free.

Build Quality & Brand Reliability: Sturdy construction, safety features, and good after-sales service are vital when investing in any electronic appliance.

Top Picks That Stand Out in Indian Households

While numerous models claim top spots, certain rice cookers have won the trust of Indian users through consistent performance and durability. Brands like Panasonic, Prestige, Bajaj, and Philips have been household names for decades. New-age brands such as Kent and Agaro have also made a mark with innovative features and sleek designs.

For instance, the Panasonic SR-WA18 is a reliable model that’s perfect for mid-sized families. It comes with a strong anodized aluminum cooking pan and automatic cooking functions. Another popular choice is the Prestige Delight PRWO, known for its durability and simplicity.

For tech-savvy users, the Geek Robocook Zeta offers a digital touch with pre-programmed settings for rice, dal, steam, and more. It may cost more than traditional cookers, but the flexibility and ease it provides are worth considering.

The Quiet Revolution in Urban Kitchens

The adoption of rice cookers represents a subtle yet powerful shift in urban lifestyles. In bustling cities, where time is a luxury, appliances that can multitask are highly valued. A rice cooker doesn’t just save time; it also promotes healthier cooking. Since there's no need to monitor the stove, users can engage in other activities, from preparing curries to catching up on household chores.

Interestingly, rice cookers have also become a part of student life and bachelor accommodations. Compact, easy to use, and portable, these devices serve more than just rice—they help make khichdi, boil eggs, or even prepare instant noodles.

Making the Right Choice

Finding the best rice cooker in India isn’t about choosing the most expensive or the most popular model. It’s about identifying your needs and selecting a model that offers the best balance of functionality, durability, and price.

Before purchasing, it’s also wise to check user reviews and warranty details. Many reputed brands offer 1-2 years of warranty along with a robust customer sup port network across India. Investing in a product from a trusted brand not only ensures peace of mind but also adds longevity to your kitchen experience.

Read More :- Breathing Easy: How a Kitchen Chimney Transforms Your Cooking Experience

Final Thoughts

The rice cooker is no longer just a single-use appliance. It’s evolving into a smart, versatile kitchen tool that aligns with modern cooking habits. Whether you're a working parent trying to manage busy mornings or a student looking for easy cooking solutions, a rice cooker can simplify your daily routine.

As consumer awareness grows, manufacturers are stepping up their game, offering better features and designs. If chosen wisely, the best rice cooker in India can become your most dependable kitchen companion, turning everyday cooking into a quicker and more enjoyable process.

Let your rice cooker do the hard work—because a well-fed home is a happy home.

Name:- Bijli ki Dukan Address — Ascent Retechno India Pvt LtdShop №04, 05, 06 & 07 AV Crystal, Near Navneet Hospital, Opp. Achole Talav, Nallasopara East, Palghar, Maharashtra — 401209. Phone no — +91 9004580251 Website — https://www.bijlikidukan.com/ Mail — info@bijlikidukan.com Facebook — https://www.facebook.com/people/Bijli-ki-Dukan/61564848986473/ Instagram — https://www.instagram.com/bijlikidukan

[elite-electrical-kent]

How Elite Electrical Kent Is Leading the Way in Eco-Friendly Electrical Solutions

In a world increasingly aware of the need for sustainability, many homeowners and businesses are looking for ways to reduce their environmental impact. Among the many industries making strides toward greener practices, the electrical services sector is stepping up in a big way. One company at the forefront of this shift is Elite Electrical Kent, a regional leader in providing innovative, eco-friendly electrical solutions across the South East of England.

With a strong commitment to energy efficiency, smart technology, and sustainable practices, Elite Electrical Kent is not only transforming how electrical work is delivered but also helping customers become more environmentally responsible.

A Vision for Sustainable Energy Use

Elite Electrical Kent was founded with a forward-thinking approach: combine expert electrical services with a focus on sustainability. This philosophy has driven their team to adopt practices and technologies that prioritize environmental impact alongside functionality and safety.

From recommending energy-saving products to installing smart systems that reduce consumption, their work reflects a deep understanding of how modern electrical systems can support both performance and environmental goals.

Smart Home Technology and Energy Efficiency

One of the key areas where Elite Electrical Kent is making an impact is in smart home integration. Smart lighting, heating systems, and automated appliances can dramatically reduce energy usage by ensuring systems are only in use when needed. Elite Electrical works closely with homeowners to design and install custom smart home solutions that not only offer convenience but also contribute to lower energy bills and a smaller carbon footprint.

For example, motion-activated lighting, programmable thermostats, and smart plugs are just a few of the tools Elite Electrical recommends to reduce unnecessary electricity usage. These systems help households cut down on waste while gaining control over their energy patterns.

Supporting Renewable Energy Adoption

Elite Electrical Kent has also made significant strides in supporting renewable energy solutions. They assist clients with the installation of solar panel systems and battery storage units, enabling homes and businesses to generate and store their own clean electricity. Their technicians are trained in the latest solar technologies and ensure that each system is optimized for both efficiency and durability.

In commercial projects, the company also advises on energy audits and infrastructure upgrades to support larger renewable installations. This holistic approach ensures clients get the maximum return on investment from their eco-friendly upgrades.

LED Lighting Conversions

Another way Elite Electrical Kent promotes sustainability is through LED lighting conversions. LED bulbs use significantly less energy than traditional incandescent or halogen lighting, and they last much longer, reducing both waste and cost. The company has completed numerous lighting projects across homes, offices, and industrial spaces—each one contributing to meaningful reductions in energy use.

Their team also conducts energy assessments to help clients determine where they can benefit most from LED upgrades, making sure each conversion has the biggest impact possible.

Electric Vehicle (EV) Charging Stations

As electric vehicles become more common, the need for home and commercial EV charging infrastructure is rapidly growing. Elite Electrical Kent is staying ahead of the curve by providing expert EV charger installations tailored to client needs. Whether it’s a single home charger or a bank of stations for a business fleet, the company ensures each installation meets current regulations and is future-proofed for expanding use.

By supporting EV adoption, Elite Electrical helps reduce reliance on fossil fuels and supports broader environmental goals.

Education and Community Engagement

Beyond installations, Elite Electrical Kent is also committed to education and community awareness. Their team regularly shares tips on energy conservation, electrical safety, and eco-friendly upgrades via workshops and digital content. This proactive approach helps clients make informed choices that benefit both their finances and the planet.

They also work with local schools and organizations to promote sustainability, encouraging younger generations to consider careers in the green energy sector.

Trusted Professionals With a Green Mission

Elite Electrical Kent is known not only for its technical expertise but also for its reliable service and transparent advice. Their electricians are fully qualified, insured, and up-to-date on the latest electrical codes and green building standards. This professionalism has earned them a strong reputation across Kent, including in areas like Sevenoaks, Ashford, and Tunbridge Wells.

If you're looking for a trusted Electrician in Tunbridge Wells residents can rely on for sustainable, future-ready installations, Elite Electrical Kent offers both technical skill and a strong environmental ethos.

Looking Ahead: The Future of Eco-Friendly Electrical Services

The demand for green solutions will only continue to grow. With rising energy costs, environmental awareness, and evolving technology, customers are looking for electricians who can do more than just fix a broken outlet—they want guidance on how to improve their systems holistically.

Elite Electrical Kent is perfectly positioned to meet that demand. By staying on top of industry innovations, investing in continuous training, and maintaining a clear environmental focus, the company is helping to shape the future of electrical services in the UK.

Final Thoughts

In a time when every choice counts toward the health of our planet, it’s reassuring to know there are companies like Elite Electrical Kent leading the way. Whether through smart technology, renewable installations, or energy-saving upgrades, they are proving that top-tier electrical services can—and should—go hand in hand with sustainability.

Choosing an eco-conscious electrician isn’t just about modernizing your home or business—it’s about making a commitment to a better future.

[scopehome15]

Scope Home Security LTD

Welcome to Scope Home Security. We cover all aspects of gate and door automation and CCTV home alarms and more across Kent.

cctv installation kent

[kentautomationaudiovisual]

Futuristic Living: Smart Homes in Kent

Explore the cutting-edge world of Smart Homes in Kent, where innovation meets comfort. Immerse yourself in a seamless blend of technology and lifestyle as these homes boast state-of-the-art automation, intelligent energy management, and personalized living experiences. From voice-activated controls to energy-efficient solutions, discover the future of home living in the picturesque surroundings of Kent. Welcome to a realm where your home anticipates your needs, adapts to your preferences, and enhances your everyday life.

[agrinewblogs]

What Are the Benefits of Using Distillers Dried Grains with Solubles (DDGS) in Animal Feed?

The Distillers Dried Grains with Solubles (DDGS) market has been experiencing significant growth, driven by the increasing global demand for sustainable animal feed and renewable energy sources. DDGS, a co-product of the ethanol production process from grains like corn, wheat, and barley, offers a high-protein, nutrient-rich feed option for livestock. This versatility makes it an attractive choice for farmers and feed manufacturers aiming to optimize animal nutrition and reduce feeding costs.

The market for distillers' dried grains with solubles market size was estimated to be worth USD 9.90 billion in 2022. The Distillers Dried Grains with Solubles (DDGS) market is expected to increase from USD 10.57 billion in 2023 to USD 15.75 billion by 2030, with a compound yearly growth rate (CAGR) of 6.86% over the forecast period (2023- 2030).

Key Drivers of Market Growth

Nutritional Benefits: DDGS is valued for its high protein and fiber content, essential for the healthy growth of cattle, swine, poultry, and even aquaculture. It provides a cost-effective alternative to traditional feeds, which are often more expensive and less sustainable.

Sustainability: As a by-product of ethanol production, DDGS aligns with the global shift towards more sustainable agricultural practices. Utilizing DDGS helps in waste reduction, making ethanol production more eco-friendly and economically viable.

Economic Factors: The fluctuating prices of traditional feed ingredients like soybean meal have pushed producers to seek more economical alternatives. DDGS offers a competitive edge in this regard, providing a stable and affordable feed option.

Explore the report's contents, sections, and key insights by browsing through its detailed information.

Key Players: 

Archer Daniels Midland (U.S.), Globus Spirits Ltd. (India), CropEnergies (Germany), CHS Inc. (U.S.), Nugen Feeds & Foods (India), J. D. HEISKELL HOLDINGS LLC (U.S.), and Kent Feeds (U.S.)

Challenges and Opportunities

Despite its benefits, the DDGS market faces challenges such as quality variability and logistical issues in transportation and storage. However, advancements in processing technologies and quality control measures are addressing these concerns, ensuring a more consistent and reliable product.

Future Outlook

The DDGS market is poised for continued growth, with increasing adoption in emerging markets and innovations in feed formulation. The integration of DDGS in aquaculture and pet food industries presents new avenues for expansion. Additionally, ongoing research into enhancing the nutritional profile and digestibility of DDGS will further solidify its position in the global feed market.

Discover more Research Reports in Agriculture Industry, by Market Research Future:

Commercial Greenhouse Market Research Report: By Greenhouse Type (Tunnel Greenhouses, Gutter Connected Greenhouses, Hybrid Greenhouses, Lean-to Greenhouses, Roof Greenhouses), By Covering Material (Glass, Plastic Film, Polycarbonate), By Application (Growing Vegetables, Growing Fruits, Growing Flowers, Nursery Production, Research and Development), By Technology (Hydroponics, Aeroponics, Aquaponics), By Control System (Manual Control, Semi-Automated Control, Fully Automated Control) and By Regional (North America, Europe, South America, Asia

Carrot Market Research Report: Information By Type (Fresh and Frozen), By Distribution Channel (Offline and Online), And by Region (North America, Europe, Asia-Pacific, And Rest of The World) –Market Forecast Till 2032.

Aquaponics Market ResearchReport by Produce (Fish, Fruits Vegetables, and Others), Components (Rearing Tank, Settling Basin, Bio-Filters, Sump Tank, and Others), Equipment (Pumps and Valves, Grow Lights, Water Heaters, Water Quality Testing, Fish Purge Systems, Aeration Systems, and others), Application (Commercial, Home Food Production, and Others), and Region (North America, Europe, Asia-Pacific, and Rest of the World) - Forecast till 2030

About Market Research Future:

At Market Research Future (MRFR), we enable our customers to unravel the complexity of various industries through our Cooked Research Report (CRR), Half-Cooked Research Reports (HCRR), Raw Research Reports (3R), Continuous-Feed Research (CFR), and Market Research Consulting Services. MRFR team have supreme objective to provide the optimum quality market research and intelligence services to our clients. Our market research studies by Components, Application, Logistics and market players for global, regional, and country level market segments, enable our clients to see more, know more, and do more, which help to answer all their most important questions.

Contact:

Market Research Future®

99 Hudson Street,5Th Floor

New York, New York 10013

United States of America

Phone:

+1 628 258 0071(US)

+44 2035 002 764(UK)

Email: sales@marketresearchfuture.com

Website: https://www.marketresearchfuture.com